Competencies Aseptic Training. City and Guilds. BTEC Nationals NVQ Competence-based qualifications

Similar documents
Edexcel BTEC Level 2 and Level 3 Diploma in Motorcycle Maintenance and Repair Principles (QCF)

Vehicle Systems and Technology

QUALIFICATION CODE QUALIFICATION TITLE TLI Certificate IV in Driving Operations

IMI ACCREDITATION ELECTRIC VEHICLE

NZQA Expiring unit standard version 2 Page 1 of 5. Perform minor servicing tasks on a petrol fuel system

Entry 2 Skills for Working Life ( )

Pearson Higher Nationals Recognition of Prior Learning (RPL)

Aircraft Hydraulic Systems Design and Performance

HAZWOPER Technician Level Course Outline

Police Operations: Tachograph Equipment Inspection

Automotive maintenance and repair, body and paint 3902, 4101, 4270, 4271, 4290, 4291, 4310, 4311, 4390, 4391, 4121, 4122

Stripping and rebuilding motorsport engines (pre-competition)

Stripping and rebuilding motorsport vehicles (precompetition)

SEMPEO SQA Unit Code H Carrying out routine servicing of mechanical equipment

Diagnose and rectify faults in a motorcycle electronic ignition system

QUALIFICATION HANDBOOK

-SQA-SCOTTISH QUALIFICATIONS AUTHORITY. Hanover House 24 Douglas Street GLASGOW G2 7NG NATIONAL CERTIFICATE MODULE DESCRIPTOR

Learning Exchange: Prospectus

Practical Workbook. Vehicle Systems Maintenance. Assessment Recording Forms Level SCQF Level 4

Pearson BTEC Level 2 Certificate in Introduction to the Role of the Professional Taxi and Private Hire Driver

A briefing for APSE Members. DRIVER CERTIFICATE OF COMPETENCE (DCPC) 2009 EU Directive 2003/59.

This qualification has been reviewed. The last date to meet the requirements is 31 December 2020.

National Certificate in Electricity Supply (Sub Station Maintainer) (Level 4)

NZQA registered unit standard version 1 Page 1 of 5. Apply and remove portable earths in an electricity supply system

DRIVER QUALIFICATION FILE CHECKLIST

Applications of Pneumatics and Hydraulics

NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines

Level 4. Credits 61. Purpose. Replacement Information

Re Introducing FSSC Jacqueline Southee, NA Representative, FSSC PJR Webinar Series August

NZQA registered unit standard version 1 Page 1 of 6

AUTOMOTIVE ELECTRICAL AND ELECTRONICS Service an automotive battery

South Tacoma Groundwater Protection District Spill Prevention and Response Plan

QCF Unit and Assessment Specification

Spillage from a semi-buried jet fuel tank 30 December, 2005 Sainte-Marie [Reunion Island] France

JUNE 2017 Level 3 Advanced Technical Extended Diploma in Land-based Engineering Level 3 Land-based Engineering Theory Exam (1)

ecognition of Prior Learning (RPL)

NOTES FOR THE APPLICATION OF FEMAS IN THE UNITED KINGDOM

Level 5. Credits 85. Purpose. Special Notes

WIPP Update. Jeffrey Carswell, Deputy Manager. Carlsbad Field Office Office of Environmental Management

Vocational Qualifications (QCF, NVQ, NQF) CPC (Certificate of Professional Competence)

NZQA Expiring unit standard version 2 Page 1 of 7. Check, remove, and refit wheels and tyres from heavy machines or equipment

Driver CPC 4U National Transport Training

2014 Training Courses from the leaders in steam

Table of Contents. Why An Occupational Health and Safety Program Demonstrating Commitment to Occupational Health and Safety... 1.

Level 2 Diploma in Heavy Vehicle Maintenance and Repair Principles ( ) August 2017 Version 1.3

Level 1 Certificate and Diploma in Vehicle Maintenance ( ) August 2017 Version 3.5

ADO-Aerial Apparatus Manipulative Skill Objectives PREVENTIVE MAINTENANCE

Qualification structure for the Edexcel Level 2 NVQ Certificate in Plant Operations (Construction) (QCF)

Accreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory

NZQA Expiring unit standard 5441 version 5 Page 1 of 5

The Learning Outcomes are grouped into the following units:

Mr Robert George WAGSTAFF BSc, DipPhys, Cert Comp Math (Open), LCGI, MITAI

AUR32416 Certificate III in Automotive Refinishing Technology

VERSAFLOW SERIES UNIDIRECTIONAL LAMINAR AIRFLOW COMPOUNDING ASEPTIC ISOLATOR (CAI)

Practical Assessment Record

NZQA Expiring unit standard 3400 version 4 Page 1 of 6. Check a four stroke petrol engine for condition using hand held test equipment

MAINTENANCE AND TESTING OF PORTABLE ELECTRICAL EQUIPMENT, RCDS AND TOOLS CS-OHS-33

Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( )

NZQA registered unit standard version 4 Page 1 of 5

IMIEV3 Service and repair non-live electric and hybrid vehicle systems

LEGAL REQUIREMENTS FOR TRANSPORT AND DISPOSAL OF HAZARDOUS WASTE IN THE ERA OF WASTE CLASSIFICATION

Initial and Periodic Inspection and Testing of Electrical Installations ( ) Sample Test

Rubbish Chutes Operating & Assembly Instructions

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Pearson Edexcel Level 2 NVQ Certificate in Plant Operations (Construction) (QCF) 601/6018/4

QCF level: 4 Credit value: 15

Heavy vehicle service and maintenance technician standard: Employer Occupational Brief

Under-Vehicle Inspection Drive Train Part 2

Vocational Qualifications (QCF, NVQ, NQF) CPC (Certificate of Professional Competence)

National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans

GL1200T Cut & Seal. (GL1200 Seal only)

Vocational Qualifications (QCF, NVQ, NQF) CPC (Certificate of Professional Competence)

Residential Energy Labeling

MAINTENANCE AND REPAIR MAINTENANCE AND REPAIR( COMMUNICATION SKILLS ENGINEERING SCIENCE COMPUTER HARDWARE ELECTRONICS (THEORY)

Percentage Cumulative % National (2016)

NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER

Conduct on-road training for motorcycle riders

Program of Instruction Course Syllabus

NZQA registered unit standard 9076 version 4 Page 1 of 5

<800> Hazardous Drugs Handling in Healthcare Settings. Jeanne Sun, PharmD

Control, Safe Use and Operation of Road-Rail Plant

Ballast Water Management Surveyor checklist

NZQA registered unit standard version 1 Page 1 of 5

BS EN :2011 BS :2002+A1:2013 UKSRG Guidelines-4:2011 EN124:1994 HA104\09

National Certificate in Electricity Supply (Line Mechanic Distribution) (Level 4)

National Unit Specification: General Information

INTERNATIONAL CERTIFICATION INTERNATIONAL SDN ( W)

TGL-28-R1-04. Gasoline Stations

ADO Mobile Water Supply Apparatus Manipulative Skill Objectives PREVENTIVE MAINTENANCE

POWER SYSTEM INCIDENT REPORT: TRIP OF NO 1 AND 2 NEW OSBORNE 66 KV BUSBARS ON 26 SEPTEMBER 2010

MUNICIPAL SOLID WASTE OPERATIONS SAFETY AUDIT/SURVEY TOOL. Injury prevention during solid waste operations

Candidate Name: Assessment Centre: This Unit has the following elements: Candidate signature: Assessor signature:

1 a) Not complying with the requirements of the Health and Safety at Work Act can have serious consequences.

Model Curriculum. Light Motor Vehicle Driver Level 3 SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:

INTERTEK CERTIFICATION INTERNATIONAL SDN BHD ( W)

Demonstrate knowledge of the operation, service checks, fault diagnosis, and repair of carburettors

CarePacs. Traceable Balance Testing for Secure Weighing Processes

GL1200T Cut & Seal. (GL1200 Seal only)

Installation, Operating & Maintenance Instructions. HV angle valve with pneumatic actuator single acting with closing spring (NC)

Aircraft Propulsion Technology

Transcription:

Competencies Aseptic Training BTEC Nationals NVQ Competencebased qualifications Edexcel BTEC Level 2 Certificate in Pharmaceutical Science (QCF) Edexcel Level 2 NVQ Certificate in Pharmacy Service Skills (QCF) Edexcel BTEC Level Diploma in Pharmaceutical Science (QCF) Edexcel Level NVQ Diploma in Pharmacy Service Skills (QCF) City and Guilds Level 2 Certificate in Pharmaceutical Science (602) Level 2 NVQ Certificate in Pharmacy Service Skills (QCF) (02) Level Diploma in Pharmaceutical Science (60) Level NVQ Diploma in Pharmacy Service Skills (QCF) (0) Updated August 2012 This mapping exercise was undertaken against the University of Leeds package, January 2010, against the Edexcel BTEC Level 2 and in Pharmaceutical Science and the Edexcel Level 2 and in Pharmacy Service Skills (NVQ).

Results of the accreditation: Unit APL d BTEC Level 2 Chapter 2: Good Manufacturing Practice Chapter : Basic Microbiology Chapter : Legislation and Standards Chapter : Clean Room Design Chapter 6: Work Zones Chapter 7: Personal Hygiene Chapter 8: Quality Systems for Operators Chapter 9: Cleaning Chapter 10: Environmental Monitoring BTEC Level 2 Certificate in Pharmaceutical Science (QCF) Mapping Document Level 2 Assessment Level 2 Certificate in Pharmaceutical Science (62) Mapping Document Level 2 Unit 6 LO 1 Unit 206 LO 1 Unit 7 LO 1 Unit 207 LO 1 Unit 6 LO 2 Unit 6 P8 Unit 206 LO 2 2 Unit 7 LO 2 Unit 7 P7 Unit 207 LO 2 2 Unit 6 LO 1 Unit 206 LO 1 Unit 7 LO 1 Unit 207 LO 1 Unit 6 LO 2 Unit 6 P7 Unit 206 LO 2 1 Unit 7 LO 2 Unit 7 P6 Unit 207 LO 2 1 Unit 6 LO 2 Unit 206 LO 2 Unit 7 LO 2 Unit 207 LO 2 Unit 6 LO 2 Unit 6 P9 M6 Unit 206 LO 2 Unit 7 LO 2 Unit 7 P8 Unit 207 LO 2 Unit 6 & Unit 6 P1 Unit 206 LO 2 Unit 7 & Unit 7 P1 Unit 207 LO 2 Unit 6 LO 2 Unit 206 LO 2 Unit 7 LO 2 Unit 207 LO 2 Unit 6 LO 2 Unit 206 LO 2 Unit 7 LO 2 Unit 207 LO 2 Level 2 Assessment Competencies 2

Chapter 11: Assembly Chapter 12: Transfer Procedures Chapter 1: Aseptic Technique Chapter 1: Waste Disposal Chapter 1: Reconciliation, Inspection and Checks Chapter 16: Completing Product Processing Chapter 17: Preparation of Additives (CIVAS) Chapter 18: Preparation of Parenteral Nutrition Chapter 19: Preparation of Cytotoxics Unit 6 Unit 206 Unit 7 Unit 207 Unit 6 Unit 6 P7 Unit 206 LO 2 1 Unit 7 Unit 7 P6 Unit 207 LO 2 1 Unit 6 Unit 206 Unit 7 Unit 207 Unit 6 LO Unit 206 Unit 7 Unit 207 Unit 6 LO Unit 206 LO Unit 7 LO Unit 207 LO Unit 6 LO Unit 6 P1, P16, M9, D6 Unit 206 LO 1, Unit 7 LO Unit 7 P12 Unit 207 LO 1 Unit 6 Unit 7 Unit 6 Unit 7 Unit 6 Unit 6 LO Unit 7 Unit 7 LO Unit 6 P11 P12, P1, M8, D Unit 7 P10 P11 Unit 6 P11 P12, P1, M8, D Unit 7 P11 Unit 6 P11, P12, P1 Unit 206 Unit 207 Unit 206 Unit 207 Unit 206 LO Unit 207 LO 1, 2, 1, 2 1, 2, 2 1, 2, Competencies

Aseptic Processing Assessment Unit 6 P1, P, P6, P8, P9, P10, P1, P1, P16 M1, M, M6, M9 D Unit 7 P1, P, P7, P8, P9, P12 M1 Unit 206 LO 1 LO 2 LO Unit 207 LO 1 LO 2 LO 1,, 6 2,, 1, 1, 2,, 1 Assessor Signature: Internal Verifier Signature (if sampled): Competencies

Results of the accreditation: Edexcel Level 2 Certificate in Pharmacy Service Skills (NVQ) (QCF) Mapping Document Unit APL d NVQ Level 2 Unit Assessment Aseptic Processing Assessments Q1. Sources of Contamination and Consequences Level 2 (NVQ) Certificate in Pharmacy Service Skills (QCF) 02 Mapping Document Unit 10 2.2 Unit 1 LO 2 2 Assessment Assessor Signature: Internal Verifier Signature (if sampled): Competencies

Results of the accreditation: Unit APL d BTEC Level Chapter 2: Good Manufacturing Practice Chapter : Basic Microbiology Chapter : Legislation and Standards Chapter : Clean Room Design Chapter 6: Work Zones Chapter 7: Personal Hygiene Chapter 8: Quality Systems for Operators Chapter 9: Cleaning Chapter 10: Environmental Monitoring Chapter 11: Assembly Chapter 12: Transfer Procedures BTEC Level Diploma in Pharmaceutical Science (QCF) Mapping Document BTEC Assessment Unit 19 LO 1 Unit 019 LO 1 Unit LO 1 Level Diploma in Pharmaceutical Science 60 Mapping Document Level Level Assessment Unit 00 LO 1 Unit 19 LO 1 P1 Unit 019 LO 1 1 Unit 19 LO 2 Unit 019 LO 2 Unit 19 LO 2 Unit 019 LO 2 Unit 19 LO 2 Unit 019 LO 2 Unit 19 LO 1 Unit 19 LO Unit 19 LO 2 Unit 19 Unit 019 LO 1 Unit 019 LO Unit 019 LO 2 Unit 019 Unit 19 LO 2 Unit 019 LO 2 Unit 19 LO Unit 019 LO Unit 19 Unit 019 Competencies 6

Chapter 1: Aseptic Technique Chapter 1: Waste Disposal Chapter 1: Reconciliation, Inspection and Checks Chapter 16: Completing Product Processing Chapter 17: Preparation of Additives (CIVAS) Chapter 18: Preparation of Parenteral Nutrition Chapter 19; Preparation of Cytotoxics Unit 19 Unit 19 LO Unit 19 Unit 19 LO Unit 19 LO Unit 19 LO Unit 019 Unit 019 LO Unit 019 Unit 019 LO Unit 019 LO Unit 019 LO Unit 19 Unit 019 Aseptic Processing Assessment Unit 19 P, P7, P1 M, M Unit 19 LO P2 Unit 019 LO 1 Unit 19 LO P2 Unit 019 LO 1 Unit 19 LO P2 Unit 019 LO 1 Unit 019 LO 1 Unit 019 LO 2 Unit 019 Unit P6, P7 Unit 00 1, 2 Unit 17 P2, M1, D1 Unit 017 LO 1 2 2 Assessor Signature: Internal Verifier Signature (if sampled): Competencies 7

Results of the accreditation: Unit APL d NVQ Level Chapter 2: Good Manufacturing Practice Chapter : Basic Microbiology Level NVQ Diploma in Pharmacy Service Skills (QCF) Mapping Document NVQ Level Assessment Level (NVQ) Diploma in Pharmacy Service Skills (QCF) 0 Mapping Document Unit Unit 22, LO.1 Unit 21 LO 1 Unit 22, LO Unit 20, LO 1 Unit 19, LO 1.2,. 1. 1. Unit 21 LO Unit 17 LO 1 Unit 18 LO 1 Assessment 2, Chapter 6: Work Zones Unit 22, LO Unit 20, LO 1 Unit 19, LO 1.2,.,. 1. 1. Unit 21 LO Unit 17 LO 1 Unit 18 LO 1 2,, Chapter 7: Personal Hygiene Chapter 8: Quality Systems for Operators Chapter 1: Reconciliation, Inspection and Checks Chapter 16: Completing Product Processing Unit 22, LO Unit 20, LO 1 Unit 19, LO 1 Unit 22, LO Unit 19, LO.2,.,. 1. 1... Unit 21 LO Unit 17 LO 1 Unit 18 LO 1 Unit 21 LO Unit 17 LO Unit 21, LO.2 Unit 19 LO 2 Unit 20, LO. Unit 18 LO 2,, Competencies 8

Aseptic Processing Assessment Q1. Sources of Contamination and Consequences Q.Cleaning of Aseptic Suites, LFCs and Isolators AND Q.Cleaning Methods Q8.Entry into the Cleanroom, rules and regulations. AND Q10. Entry into a Cleanroom; Cleanroom clothing Q18.Possible Errors AND Q2.Reporting of incidents and accidents Q21.What information would you expect to find on a label of a final product? Q22.How do we ensure products are stored correctly and thus suitable for use? AND Q2.What considerations should be taken into account when distributing products? Unit 19 1. Unit 20 1. Unit 21 2. Unit 22. Unit 017 LO 1 Unit 018 LO 1 Unit 019 LO 2 Unit 021 LO Unit 22. Unit 021 LO Unit 22. Unit 021 LO Unit 19. Unit 22. Unit 017 LO Unit 021 LO Unit 21.2 Unit 019 LO 2 Unit 20. Unit 018 LO Assessor Signature: Internal Verifier Signature (if sampled): Competencies 9