TESTING REPORT Procedure used: 3A - STANDARD 3A - SMALL > ISTA CERTIFIED LABORATORY 3A - FLAT 3A - LONG VERSION DATE: 2008 ( 2014 ) Laboratory : Address : Building B, Taineng Park, Xiyuan 6th Road ISTA Member ID : ST-1908 Email : pkg@hqts-qai.com City, State/Prov :Hangzhou, Zhejiang Phone: +86 571 88907007 ZIP/Postal Code, Country : 310030, CHINA Report Number HQ163031669 > PRODUCT MANUFACTURER / SHIPPER Test Requested by :XX Company : XX. ISTA Member ID (if applicable) : Address : XX ISTA Manufacturer s License Number (if applicable) : City, State/Prov :XX, XX ZIP/Postal Code, Country :/, XX > PRODUCT AND PACKAGE DESCRIPTIONS Date Tested: May 6, 2016 Date Received: April 28, 2016 SKU/Item No.: 0601396080/GWS900 Number of Samples tested 1 Product Description: Angle Grinder Gross Weight 4.96lbs/2.25kg PACKAGE Condition before testing: No damage External Dimensions (L x W x H) 14.2 x 4.7 x 4.9 The PACKAGING used during testing was: ORIGINAL as arrived in the lab for testing 360 mm x 120 mm x 125 mm NEW re-packaged with new materials before testing Did the lab OPEN the packaged-product before testing to determine product condition? YES NO PACKAGE Description: Components of the Angle Grinder were packed into plastic bag or fixed by corrugated board, and then packed into a master carton box. > TEST RESULTS PRODUCT Condition after testing (if inspected): Found rust mark on one component; no other obvious change and product operated well. PACKAGE Condition after testing: No obvious change. Pass Fail Actual Finding Comments or recommendations: > AUTHORIZED BY Neil Peng General Manager HQ-PTR01-038/12 Page 1 of 8
TEST METHODS PROCEDURE 3A > ORIENTATION What position was the packaged-product in when the faces, edges and corners were identified: MOST STABLE SHIPPING Explain position if different than procedure recommendation: > ATMOSPHERIC CONDITIONING Start of Preconditioning(Ambient): Start of Conditioning(Controlled): Temperature ( ) 12 Temperature ( ) 38 Humidity (%) 54 Humidity (%) 85 End of Preconditioning: End of Conditioning: Temperature ( ) 13 Temperature ( ) 38 Humidity (%) 60 Humidity (%) 85 Duration: 24h Duration: 72h > SHOCK TEST FIRST DROP SEQUENCE (FOR SMALL: DO NOT TEST IN BAG) Shock Sequence Number Height of Shock (inches / mm) Orientation of packaged-product (ex: Face 6; Corner 2-3-5, Edge 3-5) Was packagedproduct CAUGHT to prevent tipping over? 1 18 / 460 EDGE Edge 3-4 Y N 2 18 / 460 EDGE Edge 3-6 Y N 3 18 / 460 EDGE Edge 4-6 Y N 4 18 / 460 CORNER Corner 3-4-6 Y N 5 18 / 460 CORNER Corner 2-3-5 Y N 6 18 / 460 EDGE Edge 2-3 Y N 7 18 / 460 EDGE Edge 1-2 Y N 8 36 / 910 FACE Face 3 Y N 9 18 / 460 FACE Face 3 Y N HQ-PTR01-038/12 Page 2 of 8
TEST METHODS PROCEDURE 3A > VIBRATION UNDER DYNAMIC LOAD OVER-THE-ROAD >> FOR STANDARD, FLAT, LONG: Formula, with values, used to Calculated Actual Top Load Total Test Face resting calculate Top Load Top Load Used Time on platform TL-H (108-H) x L x W x 0.0035 11.12 kg 12 kg / 25 lbs 60 mins Face 3 TL-W (108-W) x L x H x 0.0035 11.61 kg 12 kg / 25 lbs 30 mins Face 4 TL-L (108-L) x W x H x 0.0035 3.51 kg / 30 mins Face 6 >> FOR ALL: OVER THE ROAD (FOR SMALL: TEST IN BAG) Describe restraining devices used, if any: Steel Arms Use the spaces below to record frequency and PSD levels used: Frequency (Hz) PSD Level, g 2 / Hz 1 0.007 3 0.02 5 0.02 7 0.001 12 0.001 15 0.004 24 0.004 28 0.004 36 0.001 42 0.003 75 0.003 200 0.000004 Overall Grms: 0.53 >> FOR ALL: PICK-UP AND DELIVERY (FOR SMALL: DO NOT TEST IN BAG) Describe restraining devices used, if any: Steel Arms Face resting on platform: Face 3 Total test time: 30 min Use the spaces below to record frequency and PSD levels used: Frequency (Hz) PSD Level, g 2 / Hz 1 0.001 3 0.035 4 0.035 7 0.003 13 0.003 15 0.001 24 0.001 29 0.0001 50 0.0001 70 0.002 100 0.002 200 0.00005 Overall Grms: 0.46 > SHOCK TEST SECOND DROP SEQUENCE (FOR SMALL: TEST IN BAG) Shock Sequence Number Height of Shock (inches / mm) Orientation of packaged-product (ex: Face 6; Corner 2-3-5, Edge 3-5) Was packagedproduct CAUGHT to prevent tipping over? 10 18 / 460 EDGE Edge 3-4 Y N 11 18 / 460 EDGE Edge 3-6 Y N 12 18 / 460 EDGE Edge 1-5 Y N 13 18 / 460 CORNER Corner 3-4-6 Y N 14 18 / 460 CORNER Corner 1-2-6 Y N 15 18 / 460 CORNER Corner 1-4-5 Y N 16 36 / 910 FACE Face 5 Y N 17 (on hazard, as applicable) 18 / 460 FACE Face 3 Y N HQ-PTR01-038/12 Page 3 of 8
PHOTO ATTACHMENT Sample before test Drop test Vibration test Sample after test ********************************************************************************************************************************************************** TO BE CONTINUED HQ-PTR01-038/12 Page 4 of 8
PHOTO ATTACHMENT Box open Internal packaging 1) Internal packaging 2) Found rust mark ********************************************************************************************************************************************************** TO BE CONTINUED HQ-PTR01-038/12 Page 5 of 8
PHOTO ATTACHMENT Details of rust mark Unit product Top Load Apparatus Used ********************************************************************************************************************************************************** HQ-PTR01-038/12 Page 6 of 8
TO BE CONTINUED. P HOTO ATTACHMENT ISTA 3A - Over-the-Road Trailer Spectrum HQ-PTR01-038/12 Page 7 of 8
ISTA 3A - Pick-up and Delivery Vehicle Spectrum ********************************************************************************************************************************************************** END OF REPORT HQ-PTR01-038/12 Page 8 of 8