Pro-Line II Filing Frame
Efficiency in the office. The Pro-Line II Filing Frame is the perfect solution in regards to the professional equipment of office cabinets. It combines innovative technology with highly functional design. Its comfort features offer tangible advantages regarding its usage. The results are low production costs combined with high customer satisfaction. Standard colour: black Other colours available on request Schock full extension slide Load capacity 70 Kg (dynamic) 50 mm over-extension Easy access and tabbing of filing maps 70 mm self-closing device Safe closing function Rack + pinion parallel guidance One single locking device is sufficient Modular filing frame Final assembly without tools Same assemblies for all cabinets Premounting of filing frame possible Frame detachable from the slides Easy disassembly and reassembly Locking systems adaptable to modern locking systems from Huwil, Lehmann, Ojmar
Triple customer benefit. Easy access The 50 mm over-extension allows for a perfect access to the rear storage space. Protrusions or handles have no negative effect on the convenience of handling. The filing maps can be comfortably removed and filed. 2. Safe closing The 70 mm self closing device guarantees a safe and complete closing of the frame. Malfunctions and damages of the furniture are being avoided. A damping feature is available on request. 3. Perfect motion The rack + pinion parallel guidance ensures a synchronized movement. For instance, it allows closing the drawer from the corner without the jamming or racking of the filing frame.
Schock ball bearing slide with rack + pinion parallel guidance. Count: 100.000 High load capacity Load rate 70 Kg LGA-tested with 100.000 cycles Maintenance-free Dirt will be automatically displaced by the balls Long life durability Lateral impacts will be absorbed elastically (A) 50 mm over-extension Easy access and tabbing of filing maps Telescopic extended rack No additional space required (B) 70 mm self-closing device Safe closing function Integrated in the rack of the parallel guidance No loss of load capacity (e.g. for 3 x A4 width) (C) Rack + pinion parallel guidance One single locking device is sufficient Double cog rows with involute toothing Meets the blocking force of locking systems
Final assembly without tools. The cabinet brackets are screwed into the side walls before the final cabinet assembly. At the end of the production, the filing frame will be mounted without tools. This modular system provides a high flexibility in production as well as considerably low storage costs. Assembly: (1) Screw-in the cabinet brackets Hole patterns see page 6-9 (2) Attach the slide modules Front cutout of cabinet brackets for installation with front cover. Rear cutout for installation behind doors (see page 8-9) (3) Attach the front and rear panel (4) Insert the connection rod Push both pinion retainer clips (left and right) towards the pinion wheels until they click into place Order data for basic equipment see page 18-19 Order data for accessories see page 13 Disassembly: (1) Pull out the filing frame (2) Detach the pinion retainer clips Lift latch and pull the clip backwards (3) Remove the connection rod (4) Remove the filing frame (see illustration) Lock rear panel by bending over the latch at the slide panel. Lift frame at the frontside and pull forward until the bayonet lancings are released, then take off the frame.
Vertical graduation system 25 mm. Front edge of cabinet = rear edge of front cover* 69 41 Interior cabinet width Frame width / Drawer width 41 80 22 Frame depth 20 3 30 40 325 ø 4,3 272 245 Locking bar 94 19 4,5 3 20 43 Filing map 37 Interior cabinet depth Minimum height of front cover: 325 Swivel plates A4 longwise 225 175 Locking bar A4 crosswise A5 longwise A5 crosswise 19 125 100 1 A6 crosswise 69 87 9 25 25 20 3 * Regarding cabinets with a front cover, the hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet.
Vertical graduation system 32 mm. Front edge of cabinet = rear edge of front cover* Interior cabinet width 69 41 Frame width / Drawer width 41 Frame depth 80 20 22 3 30 40 320 Locking bar 271 244 ø 4,3 94 19 4,5 3 20 43 Filing map 37 Interior cabinet depth Minimum height of front cover: 320 Swivel plates A4 longwise 224 A4 crosswise A5 longwise Locking bar 160 A5 crosswise 19 128 1 A6 crosswise 69 87 23 32 32 20 3 * Regarding cabinets with a front cover, the hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet. Minimum dimension for wide drawer: 6 mm
Depth dimensions for cabinets with front cover. Front edge of cabinet = rear edge of front cover* Interior cabinet depth: 322 mm Frame depth: 280 mm * The hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet. min. 2 37 192 256 Cabinet bracket cutout for slide attachment Interior cabinet depth: 372 mm Frame depth: 330 mm (A4) min. 2 Option 1 Option 2 37 192 256 320 Interior cabinet depth: 427 mm Frame depth: 385 mm (Foolscap) min. 2 37 256 320 Interior cabinet depth: 522 mm Frame depth: 480 mm min. 2 Option 1 Option 2 37 256 320 384 448
Depth dimensions for cabinets with doors or shutters. Front edge of cabinet 22 Interior cabinet depth: 344 mm Frame depth: 280 mm min. 2 37 192 256 Cabinet bracket cutout for slide attachment 22 Interior cabinet depth: 394 mm Frame depth: 330 mm (A4) min. 2 Option 1 Option 2 37 192 256 320 22 Interior cabinet depth: 449 mm Frame depth: 385 mm (Foolscap) min. 2 37 256 320 22 Interior cabinet depth: 544 mm Frame depth: 480 mm min. 2 Option 1 Option 2 37 256 320 384 448
Width variations. Standard Pro-Line II filing frames are configured for single cabinets with 19 mm side walls. However, by inserting spacers they can also be used with row cabinets or even adapted to side walls with 16 mm thickness. This allows the same frame to be used for all cabinet variations. The spacers are mounted between the cabinet bracket and the cabinet wall. When a locking system is present, the locking rod is routed between the spacer and the cabinet bracket. Overall cabinet width e.g. 800 mm 19 Interior cabinet width e.g. 762 mm 19 8 Single cabinet 19 mm Locking bar 17 24 Frame width e.g. 680 mm 41 19 Spacer 9,5 mm 9,5 19 Row cabinet 19 mm Frame width e.g. 680 mm 16 Spacer 3,0 mm Single cabinet 16 mm 3,0 16 Frame width e.g. 680 mm 16 Spacer 11,0 mm 11,0 16 Row cabinet 16 mm Cabinet bracket 17 mm with spacer 9,5 mm Frame width e.g. 680 mm Cabinet type Spacer type Demand Article No. UQ Row cabinet 19 mm Spacer 9,5 mm 2 pieces 092.06667H 20 pcs. Single cabinet 16 mm Spacer 3,0 mm each 092.06666H 20 pcs. Row cabinet 16 mm Spacer 11,0 mm side wall 092.06668H 20 pcs.
Locking systems. An adaptation to a locking system can be achieved by using the respective lock-catch plates which will be mounted on the sides of the filing frame. In the shrouds there are holes for installation with a front cover or behind doors (offset 22 mm). The locking bar will be mounted between the cabinet bracket and the side wall. Because of its involute toothing and the double cog rows, the rack + pinion parallel guidance meets the provided blocking forces for locking systems. Therefore, a single locking device is sufficient. 12 33 Front edge of cabinet = rear edge of front cover Huwil SVS 3 ø 5 69 Lehmann Simultan Stop 69 Ojmar Sistema 1038 ø 8 14 12 6 20 13 13 69 Pro-Line II filing frame with rack + pinion parallel guidance and locking device on the right-hand side. Standard locking device ø 7 7 3 18,5 7,5 69 Description Side Colour Article No. UQ Lock-catch plate Huwil SVS3 right silver grey 092.06674Z 20 pcs. Lock-catch plate Lehmann Simultan Stop right silver grey 092.06675Z 20 pcs. Lock-catch plate Ojmar Sistema 1038 right silver grey 092.06676Z 20 pcs. Lock-catch plate Standard right silver grey 092.06677H 10 pcs. * Lock-catch plates for the left-hand side available on request
Width variations - Special solutions. Standard Pro-Line II filing frames have shrouds for completely concealing the slides. The variant with half shrouds offers a space savings of 6 mm per side, e.g. for installation behind doors (2). The variant with mixed shrouds allows it to achieve the required partition also with reduced interior width, e.g. 3 x A4 in cabinets with horizontal shutters (3). Variant (4) is an alternative when locking mechanisms are not needed. 41 Standard version 41 Locking bar 8 8 Frame width 17 17 41 Variation with half shrouds 41 Locking bar 14 with locking system 14 4 17 30,5 Frame width Variation with mixed shrouds with locking system 41 17 Locking bar 4 Frame width 6,5 17 Further specialities, e.g. filing frames with integrated blocking device Tilt-Control please find in our brochure Filing frame Basic-Line. 4 30,5 Variation with half shrouds without locking system Frame width 30,5 4 6,5 6,5 Cabinet width / Frame partition Frame width Interior cabinet width A + B C D [mm] (1) (2) (3) (4) Overall cabinet width 600 mm* 480 562 562 -- -- Overall cabinet width 800 mm* 680 762 762 -- -- Overall cabinet width 1000 mm* 880 962 962 -- -- Overall cabinet width 1200 mm* 1080 1162 1162 -- -- Partition 1 x A4 324 406 406 396 385 Partition 2 x A4 or 3 x A5 676 758 758 748 737 Partition 3 x A4 1028 1110 1110 1100 1089 * Basis for interior cabinet width: Single cabinet with 19 mm side walls
Accessories for Pro-Line II filing frame. Cross bar for filing maps Frame depth: 280 / 330 / 385 / 480 mm Finish: black powder-coated incl. plastic retainers Order data see page 18 Wire bracket for filing maps Track width: 330 mm [A4] Finish: galvanised Order data see page 19 Index-card box made of steel W [mm] Frame depth: 330 / 480 mm Finish: black powder-coated Order data see chart below H [mm] Interior width WI [mm] Frame depth FD [mm] Description FD H W WI Article No. UQ Index-card box A4 crosswise 330 210 333,7 323,7 092.09941H 1 pce. Index-card box A5 crosswise 330 148 222,5 212,5 092.09943H 1 pce. Index-card box A6 crosswise 330 105 166,9 156,9 092.09945H 1 pce. Index-card box A4 crosswise 480 210 333,7 323,7 092.09942H 1 pce. Index-card box A5 crosswise 480 148 222,5 212,5 092.09944H 1 pce. Index-card box A6 crosswise 480 105 166,9 156,9 092.09946H 1 pce. Swivel plate A4 crosswise 333,7 323,7 092.06658H 20 pcs. Swivel plate A5 crosswise 222,5 212,5 092.06660H 20 pcs. Swivel plate A6 crosswise 166,9 156,9 092.06662H 20 pcs.
Wide drawer conversion. By assembling a drawer insert, the Pro- Line II filing frame can be converted into an organizable wide drawer. Thanks to its modular construction there are no different parts necessary for filing frames or wide drawers. Assembly: (1)-(4) like Pro-Line II filing frame (see page 5) (5) Remove the edge profiles from both front panel and rear panel (6) Install the drawer insert Fix one border of drawer insert on front panel, then slightly overbend the drawer insert, finally fix other border of drawer insert on rear panel. Order data for basic equipment see page 18-19 Order data for organisation accessories see page 15-17
Accessories for Pro-Line II wide drawer. Drawer partition for drawer depth 330 mm (A4) Example: Drawer width 680 mm Divider panels and divider plates made of steel, with pastic connection joints Colour: black, UQ: 20 pieces Divider panel 330 mm Article No. 092.06669H Partition 3 x A4 330 Demand: 4 divider panels 092.06669H 10 A4 212,5 10 Partition 6 x A5 160 160 10 Demand: 4 divider panels 092.06669H 3 divider plates 092.08979H A5 Divider plate A5 Article No. 092.08979H Divider plate A6 Article No. 092.08528H Partition 10 x A6 Demand: 6 divider panels 092.06669H 5 divider plates 092.08528H A6
Accessories for Pro-Line II wide drawer. Drawer partition for drawer depth 480 mm Example: Drawer width 680 mm Divider panels and divider plates made of steel, with pastic connection joints Colour: black, UQ: 20 pieces Divider panel 480 mm Article No. 092.06692H 228 10 242 72 10 480 Partition 2 x A4 + 2 x A5 + 3 x A6 Demand: 4 divider panels 092.06692H 1 divider plates 092.06688H 4 divider plates 092.06689H A4 A5 A6 126 10 323,7 Divider plate A4 Article No. 092.06688H 156,8 156,8 10 Divider plate A5 Article No. 092.06689H Alternative partitions 4 x A4 8 x A5 12 x A6
Accessories for Pro-Line II wide drawer. Index-card formation for drawer depth 330 mm / 480 mm Example: Drawer width 680 mm Divider panels and swivel plates made of steel, with pastic connection joints Colour: black, UQ: 20 pieces Divider panel 330 mm - Article No. 092.06669H Divider panel 480 mm - Article No. 092.06692H Formation 2 x A4 crosswise Swivel plate A4 crosswise 092.06658H 330 / 480 Demand: 3 divider panels 092.06669H/092.06692H i.e. 4 swivel plates 092.06658H 10 323,7 10 10 A4 longwise 092.06659H Formation 3 x A5 crosswise A5 crosswise 092.06660H Demand: 4 divider panels 092.06669H/092.06692H i.e. 6 swivel plates 092.06660H 212,5 A5 longwise 092.06661H Formation 3 x A5 crosswise A6 crosswise 092.06662H Demand: 5 divider panels 092.06669H/092.06692H i.e. 8 swivel plates 092.06662H 156,9
Order data - Basic equipment. Wide drawer insert (not illustrated) No. Description * interior cabinet depth depending on cabinet type (see page 8-9) Frame depth (mm)* 280 330 385 480 [A4] [Foolscap] 1 Full extension slide Series 038 055.09490H 055.09491H 055.09492H 055.09493H 5 sets premounted assembly with rack, side panel, shroud and 70 mm self-closing device 2 Cabinet bracket 053.06650 053.06650 053.06650 053.06650 20 pcs. 4 pieces each filing frame 3 Cross bar (optional) 053.09501H 053.09502H 053.09503H 053.09504H 20 pcs. incl. retainers No. Description Frame width (mm) / Interior cabinet width (mm) 324 / 406 480 / 562 680 / 762 880 / 962 1080 / 1162 [1 x A4] [2 x A4] [3 x A4] 4 Front panel 053.06950H 053.06710H 053.06711H 053.06917H 053.06712H 10 pcs. 5 Rear panel 053.09494H 053.09000H 053.09001H 053.09002H 053.09003H 10 pcs. 6 Connection rod 053.09323H 053.09341H 053.09342H 053.09343H 053.09344H 10 pcs. premounted assembly UQ UQ No. Description Frame width (mm) / Interior cabinet width (mm) 324 / 406 480 / 562 680 / 762 880 / 962 1080 / 1162 [1 x A4] [2 x A4] [3 x A4] UQ 7 Wide drawer insert Drawer depth 330 mm Wide drawer insert Drawer depth 480 mm 092.09820H 092.09822H 092.09824H 092.09826H 092.09828H 2 pcs. 092.09821H 092.09823H 092.09825H 092.09827H 092.09829H 2 pcs.
Order data - Accessories. Installation with front cover: Installation behind doors: Bore holes Ø 5 mm for designer grips Distance 96/128 mm Mounting the front cover supports: The support pieces fix the front cover in upright position. Filing frame: Insert support pieces from below into the slot of each side panel. Wide drawer: Remove edge profiles and screw the support pieces from inside in each side panel with self-tapping screw M3 x 6 mm (Article No. 090.09846). Mounting the cover caps: The cover caps fix the front panel at the side panels of the filing frame. Put the cover caps (R/L = right/left) on front panel and front end of shroud; pull the edge profile over both cover caps. No. Description Finish Article No. UQ 7 Wide drawer insert black see page 18 2 pcs. Dimensions and order data see page 18 8 Front cover support black 092.06651H 20 pairs 9 Cover cap black 092.06670H 10 pairs 10 Wire bracket for filing maps galvanised 092.06673Z 50 pcs. PLIIHR-1006E
We offer our help. 2006 Schock Metallwerk GmbH - Subject to technical amendment Give us a call or write to us. Together you and your Schock specialist can work out the optimum solution for you. Schock Metallwerk GmbH Siemensstr. 1-3 D-73660 Urbach Tel. +49 7181 808-0 Fax +49 7181 808-299 E-mail: info@schock-metall.de Internet: www.schock-metall.de