Pro-Line II Filing Frame

Pro-Line II Filing Frame

Efficiency in the office. The Pro-Line II filing frame is the perfect solution for professional equipment of office cabinets. It combines innovative technology with highly functional design. Its comfort features offer tangible advantages regarding its usage. The results are low production costs and high customer satisfaction. Standard colour: black Other colours available on request Schock full extension slide Load capacity 70 Kg (dynamic) 50 mm over-extension Easy access and tabbing of filing maps 70 mm self-closing device Safe closing function Rack + pinion parallel guidance One single locking device is sufficient Modular filing frame Final assembly without tools Same assemblies for all cabinets Premounting of filing frame possible Frame detachable from the slides Easy disassembly and reassembly Locking systems adaptable to modern locking systems from Huwil, Lehmann, Ojmar

Triple customer benefit. 1. Easy access The 50 mm over-extension allows for a perfect access to the rear storage space. Protrusions or handles have no negative effect on the convenience of handling. The filing maps can be comfortably removed and filed. 2. Safe closing The 70 mm self closing device guarantees a safe and complete closing of the frame. Malfunctions and damages of the furniture are being avoided. On request also available with additional damping system "Soft Control 2". 3. Perfect motion The Schock rack + pinion parallel guidance ensures a synchronized movement. The guides run smoothly without jamming or racking even when closing the drawer from the corner.

Schock ball bearing slide with rack + pinion parallel guidance. Count: 100.000 High load capacity Load rate 70 Kg LGA-tested with 100.000 cycles Maintenance-free Dirt will be automatically displaced by the balls Long life durability Lateral impacts will be absorbed elastically (A) 50 mm over-extension Easy access and tabbing of filing maps. Telescopic extended rack. No additional space required. (B) 70 mm self-closing device Safe closing function. Integrated in the rack of the parallel guidance. No loss of load capacity (e.g. for 3 x A4 width). (C) Rack + Pinion parallel guidance "Syncro" Double cog rows with involute toothing. Blocking force is similar to a locking system. One single locking device is sufficient.

Final assembly without tools. The cabinet brackets are screwed into the side walls before the final cabinet assembly. At the end of the production, the filing frame will be mounted without tools. This modular system provides a high flexibility in production as well as considerably low storage costs. Assembly: (1) Screw-in the cabinet brackets Hole patterns see page 6-9 (2) Attach the slide modules Front cutout of cabinet brackets for installation with front cover. Rear cutout for installation behind doors (see page 8-9) (3) Attach the front and rear panel (4) Insert the connection rod Push both pinion retainer clips (left and right) towards the pinion wheels until they click into place Order data for basic equipment see page 18-19 Order data for accessories see page 13 Disassembly: (1) Pull out the filing frame (2) Detach the pinion retainer clips Lift latch and pull the clip backwards (3) Remove the connection rod (4) Remove the filing frame (see illustration) Lock rear panel by bending over the latch at the slide panel. Lift frame at the frontside and pull forward until the bayonet lancings are released, then take off the frame.

Vertical graduation system 25 mm. Front edge of cabinet = rear edge of front cover* Interior cabinet width +1,0 69 41 +0,5 Frame width / Drawer width 41 +0,5 80 22 Frame depth / Drawer depth 20 3 30 40 325 ø 4,3 272 245 Locking bar 94 19 4,5 3 20 43 Filing map 37 Interior cabinet depth Minimum height of front cover: 325 Swivel plates A4 longwise Pro-Line II wide drawer (see page 14-17) 225 175 Locking bar A4 crosswise A5 longwise 125 100 A5 crosswise A6 crosswise 19 69 25 3 25 3 20 * Regarding cabinets with a front cover, the hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet. Minimum dimension with damping system "Soft Control 2": 40 mm

Vertical graduation system 32 mm. Front edge of cabinet = rear edge of front cover* Interior cabinet width +1,0 69 41 +0,5 Frame width / Drawer width 41 +0,5 Frame depth / Drawer depth 80 20 22 3 30 40 320 Locking bar 271 244 ø 4,3 94 19 4,5 3 20 43 Filing map 37 Interior cabinet depth Minimum height of front cover: 320 Swivel plates A4 longwise Pro-Line II wide drawer (seee page 14-17) 256 A4 crosswise A5 longwise 192 Locking bar A5 crosswise 19 128 A6 crosswise 69 32 3 32 3 20 * Regarding cabinets with a front cover, the hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet. Minimum dimension with damping system "Soft Control 2": 26 mm

Depth dimensions for installation with front cover. Front edge of cabinet = rear edge of front cover* Interior cabinet depth min. 326 mm Frame depth: 280 mm * The hole pattern in the side walls has to be adjusted accordingly in case of additional tacks being used to stop the front cover 1-2 mm before the front edge of the cabinet. min. 2 37 192 256 Cabinet bracket cutout for slide attachment Interior cabinet depth min. 376 mm Frame depth: 330 mm (A4) min. 2 Option 1 Option 2 37 192 256 320 Interior cabinet depth min. 431 mm Frame depth: 385 mm (Foolscap) min. 2 37 256 320 Interior cabinet depth min. 526 mm Frame depth: 480 mm min. 2 Option 1 Option 2 37 256 320 384 448

Depth dimensions for installation behind doors. Front edge of cabinet 22 Interior cabinet depth min. 348 mm Frame depth: 280 mm min. 2 37 192 256 Cabinet bracket cutout for slide attachment 22 Interior cabinet depth min. 398 mm Frame depth: 330 mm (A4) min. 2 Option 1 Option 2 37 192 256 320 22 Interior cabinet depth min. 453 mm Frame depth: 385 mm (Foolscap) min. 2 37 256 320 22 Interior cabinet depth min. 548 mm Frame depth: 480 mm min. 2 Option 1 Option 2 37 256 320 384 448

Width variations. Standard Pro-Line II filing frames are configured for single cabinets with 19 mm side walls. However, by inserting spacers they can also be used with row cabinets or even adapted to side walls with 16 mm thickness. This allows the same frame to be used for all cabinet variations. The spacers are mounted between the cabinet brackets and the cabinet wall. When a locking system is installed, the locking bar is routed between spacer and cabinet bracket. Overall cabinet width e.g. 800 mm 19 Interior cabinet width e.g. 762 mm 19 8 Single cabinet 19 mm Locking bar 17 24 Frame width e.g. 680 mm 41 19 Spacer 9,5 mm 9,5 19 Row cabinet 19 mm Frame width e.g. 680 mm 16 Spacer 3,0 mm Single cabinet 16 mm 3,0 16 Frame width e.g. 680 mm 16 Spacer 11,0 mm 11,0 16 Row cabinet 16 mm Cabinet bracket 17 mm with spacer 9,5 mm Frame width e.g. 680 mm Cabinet type Spacer type Demand Article No. UQ Row cabinet 19 mm Spacer 9,5 mm 2 pieces 092.06667H 20 pcs. Single cabinet 16 mm Spacer 3,0 mm each 092.06666H 20 pcs. Row cabinet 16 mm Spacer 11,0 mm side wall 092.06668H 20 pcs.

Locking systems. The adaptation to a locking system is possible by means of lock-catch plates which will be mounted on the sides of the filing frame. In the shrouds there are holes for installation with a front cover or behind doors (offset 22 mm). The locking bar will be mounted between the cabinet bracket and the side wall. One locking device is sufficient Combined with the parallel guidance "Syncro" one single locking device is sufficient. Grace to the double cog rows with involute toothing the blocking force is similar to a locking system. 12 33 Front edge of cabinet = rear edge of front cover Huwil SVS 3 ø 5 69 Lehmann Simultan Stop 69 Ojmar Sistema 1038 ø 8 14 12 6 20 13 13 69 Pro-Line II filing frame with parallel guidance "Syncro" and locking device on the right-hand side. Standard locking device ø 7 69 7 3 18,5 7,5 Description Side Colour Article No. UQ Lock-catch plate Huwil SVS3 right silver grey 092.06674Z 20 pcs. Lock-catch plate Lehmann Simultan Stop right silver grey 092.06675Z 20 pcs. Lock-catch plate Ojmar Sistema 1038 right silver grey 092.06676Z 20 pcs. Lock-catch plate Standard right silver grey 092.06677H 10 pcs. * Lock-catch plates for the left-hand side available on request

Customized solutions. Standard Pro-Line II filing frames have shrouds for completely concealing the slides. The variant with half shrouds offers a space savings of 6 mm per side, e.g. for installation behind doors (2). The variant with mixed shrouds allows it to achieve the required partition also with reduced interior width, e.g. 3 x A4 in cabinets with horizontal shutters (3). Variant (4) is an alternative when locking mechanisms are not needed. 41 Standard version 41 Locking bar 8 8 Frame width 17 17 41 Variation with half shrouds 41 Locking bar 14 with locking system 14 17 30,5 4 Frame width Variation with mixed shrouds with locking system 41 17 Locking bar 8 Frame width 6,5 17 Further special solutions, e.g. with integrated blocking device Tilt-Control please find in our brochure Filing frame Basic-Line. 4 30,5 6,5 Variation with half shrouds without locking system Frame width 30,5 4 6,5 Cabinet width / Partition Frame width Interior cabinet width [mm] A (1) + B (2) C (3) D (4) Overall cabinet width 600 mm* 480 562 562 - - Overall cabinet width 800 mm* 680 762 762 - - Overall cabinet width 1000 mm* 880 962 962 - - Overall cabinet width 1200 mm* 1080 1162 1162 - - Partition 1 x A4 324 406 406 396 385 Partition 2 x A4 or 3 x A5 676 758 758 748 737 Partition 3 x A4 1028 1110 1110 1100 1089 * Basis for interior cabinet width: Single cabinet with 19 mm side walls

Accessories for Pro-Line II filing frame. Cross bar made of steel Frame depth: 280 / 330 / 385 / 480 mm Colour: black incl. 2 plastic retainers Order data see page 18 Wire bracket for filing maps Track width: 330 mm [A4] Finish: galvanised Order data see page 19 Index-card box made of steel W [mm] Frame depth: 330 / 480 mm Colour: black Order data see chart below H [mm] Interior width WI [mm] Frame depth FD [mm] Description FD H W WI Article No. UQ Index-card box A4 crosswise 330 210 333,7 323,7 092.09941H 1 pce. Index-card box A5 crosswise 330 148 222,5 212,5 092.09943H 1 pce. Index-card box A6 crosswise 330 105 166,9 156,9 092.09945H 1 pce. Index-card box A4 crosswise 480 210 333,7 323,7 092.09942H 1 pce. Index-card box A5 crosswise 480 148 222,5 212,5 092.09944H 1 pce. Index-card box A6 crosswise 480 105 166,9 156,9 092.09946H 1 pce. Swivel plate A4 crosswise 333,7 323,7 092.06658H 20 pcs. Swivel plate A5 crosswise 222,5 212,5 092.06660H 20 pcs. Swivel plate A6 crosswise 166,9 156,9 092.06662H 20 pcs.

Pro-Line II wide drawer. By assembling a drawer insert, the Pro- Line II filing frame can be converted into an organizable wide drawer. Thanks to its modular construction there are no different parts necessary for filing frames or wide drawers. Assembly: (1)-(4) like Pro-Line II filing frame (see page 5) (5) Remove the edge profiles from both front panel and rear panel (6) Install the drawer insert Fix one border of drawer insert on front panel, then slightly overbend the drawer insert, finally fix other border of drawer insert on rear panel. Order data for basic equipment see page 18-19 Order data for accessories see page 15-17

Accessories for Pro-Line II wide drawer. Drawer partition for drawer depth 330 mm (A4) Example: Drawer width 680 mm Divider panels and divider plates made of steel, incl. 2 plastic adapters Colour: black - UQ: 20 pieces Divider panel 330 mm - Article No. 092.06669H Ordering example for partition 3 x A4: 330 4 pcs. divider panel 092.06669H 10 A4 212,5 10 160 Ordering example for partition 6 x A5: 160 10 4 pcs. divider panel 092.06669H 3 pcs. divider plate 092.08979H A5 Divider plate A5 - Article No. 092.08979H Ordering example for partition 10 x A6: 6 pcs. divider panel 092.06669H 5 pcs. divider plate 092.08528H A6 Divider plate A6 - Article No. 092.08528H

Accessories for Pro-Line II wide drawer. Drawer partition for drawer depth 480 mm Example: Drawer width 680 mm Divider panels and divider plates made of steel, incl. 2 plastic adapters Colour: black - UQ: 20 pieces Divider panel 480 mm - Article No. 092.06692H 228 10 242 72 10 480 Ordering example for partition 2 x A4 + 2 x A5 + 3 x A6: 4 pcs. divider panel 092.06692H 1 pce. divider plate 092.06688H 4 pcs. divider plate 092.06689H A4 A5 A6 126 10 323,7 156,8 156,8 10 Divider plate A4 Article No. 092.06688H Divider plate A5 Artikcle No. 092.06689H Alternative partitions 4 x A4 8 x A5 12 x A6

Accessories for Pro-Line II wide drawer. Index-card formation for drawer depth 330 mm / 480 mm Example: Drawer width 680 mm Divider panels and swivel plates made of steel, incl. 2 plastic adapters Colour: black - UQ: 20 pieces Divider panel 330 mm - Article No. 092.06669H Divider panel 480 mm - Article No. 092.06692H Ordering example for formation 2 x A4 crosswise: A4 crosswise 092.06658H 330 / 480 Divider panel 330 mm: 3 pcs. 092.06669H Divider panel 480 mm: 3 pcs. 092.06692H Swivel plate A4 crosswise: 092.06658H 10 323,7 10 10 A4 longwise 092.06659H Ordering example for formation 3 x A5 crosswise: A5 crosswise 092.06660H 212,5 Divider panel 330 mm: 4 pcs. 092.06669H Divider panel 480 mm: 4 pcs. 092.06692H Swivel plate A4 longwise: 092.06659H Swivel plate A5 crosswise: 092.06660H A5 longwise 092.06661H Ordering example for formation 4 x A6 crosswise: A6 crosswise 092.06662H 156,9 Divider panel 330 mm: 5 pcs. 092.06669H Divider panel 480 mm: 5 pcs. 092.06692H Swivel plate A5 longwise: 092.06661H Swivel plate A6 crosswise: 092.06662H

Order data - Basic equipment. Wide drawer insert (not illustrated) No. Description * interior cabinet depth depending on installation (see page 8-9) Frame depth (mm)* 280 330 385 480 [A4] [Foolscap] 1 Full extension slide Series 038 055.09490H 055.09491H 055.09492H 055.09493H 5 sets premounted assembly with rack, side panel, shroud and 70 mm self-closing device 2 Cabinet bracket 053.06650 053.06650 053.06650 053.06650 20 pcs. 4 pieces each filing frame 3 Cross bar (optional) 053.09501H 053.09502H 053.09503H 053.09504H 20 pcs. incl. retainers No. Description Frame width (mm) / Interior cabinet width (mm) 324 / 406 480 / 562 680 / 762 880 / 962 1080 / 1162 [1 x A4] [2 x A4] [3 x A4] 4 Front panel 053.06950H 053.06710H 053.06711H 053.06917H 053.06712H 10 pcs. 5 Rear panel 053.09494H 053.09000H 053.09001H 053.09002H 053.09003H 10 pcs. 6 Connection rod 053.09323H 053.09341H 053.09342H 053.09343H 053.09344H 10 pcs. premounted assembly UQ UQ No. Description Frame width (mm) / Interior cabinet width (mm) 324 / 406 480 / 562 680 / 762 880 / 962 1080 / 1162 [1 x A4] [2 x A4] [3 x A4] UQ 7 Wide drawer insert Drawer depth 330 mm Wide drawer insert Drawer depth 480 mm 092.09820H 092.09822H 092.09824H 092.09826H 092.09828H 2 pcs. 092.09821H 092.09823H 092.09825H 092.09827H 092.09829H 2 pcs.

Order data - Accessories. Installation with front cover: Installation behind doors: Bore holes Ø 5 mm for designer handles Distance 96/128 mm Mounting the front cover supports Filing frame: Insert support pieces from below into the slot of each side panel. Wide drawer: Remove edge profiles and screw the support pieces from inside in each side panel with self-tapping screw M3 x 6 mm (Article No. 090.09846). Mounting the cover caps The cover caps fix the front panel at the side panels of the filing frame. Put the cover caps (R/L = right/left) on front panel and front end of shroud; pull the edge profile over both cover caps. No. Description Finish Article No. UQ 7 Wide drawer insert black see page 18 2 pcs. Dimensions and order data see page 18 8 Front cover support black 092.06651H 20 pairs 9 Cover cap black 092.06670H 10 pairs 10 Wire bracket for filing maps galvanised 092.06673Z 50 pcs. PLIIHR1007en

We offer our help. 2010 Schock Metallwerk GmbH - Subject to technical amendment Give us a call or write to us. Together you and your Schock specialist can work out the optimum solution for you. Schock Metallwerk GmbH Siemensstr. 1-3 D-73660 Urbach Tel. +49 7181 808-0 Fax +49 7181 808-299 E-mail: info@schock-metall.de Internet: www.schock-metall.de