General Specifications Manifolds for DPHarp EJA and EJX Pressure and Differential Pressure Transmitters www.parker.com Yokogawa Europe has included Parker Hannifin manifolds with our DPharp range of pressure and differential pressure transmitters suitable for all types of installations, specifications and installations. As well as the standard manifolds detailed in this document other solutions (ranging from exotic materials to direct mount assemblies to enclosures) are available upon request. Please contact your nearest Yokogawa office for further information or quotations. Specifications 316 stainless steel (other materials on request) 7/16 UNF zinc plated carbon or stainless steel bolts Type 2.1 material certificates in accordance with EN 10204 and DIN 50049 PTFE gland packing (option of Graphoil) NACE compliant (option) Oxygen clean service (option) Carbon (shot blasted and zinc sprayed) or stainless steel 4mm thick mounting brackets (option) Assembly to transmitter (option) Max. pressure 414bar (6,000psi) Max. temp. PTFE 260 C (500 F) & Graphoil 538 C (1,000 F) Permanently marking with a line diagram Marking Permanently marking with a line diagram PRESSURE VS TEMPERATURE Pressure psi (bar) 10.000 (860) 8.000 (552) 6.000 (413) 4.000 (275) 2.000 (138) 0 A B C A - A Graphoil packing A - B PTFE packing B - B 6000 psi (414 bar) standard PTFE packing B - C 6000 psi (414 bar) standard Graphoil packing A - D PEEK tip C - E PCTFE tip E DB CA 0 100 200 300 400 500 Temperature (32) (212) (392) (572) (752) (932) ºC (ºF) 414 BAR (6000 PSI) MAX 316SS Part No: HDS5M PFTE: 260ºC (500ºF) max. Model: A1 1/2 NPT 1/4NPT 3 rd Edition
2 2 Valve Manifold Suitable for use with EJ 510, EJ 530, EJX610 or EJX630 series of static pressure transmitters Title Code Description Type HBSN2FM ½ NPT F inlet & ½ NPT M outlet (select ½ NPT F on transmitter) HBSN2FF ½ NPT F inlet & ½ NPT F outlet (select ½ NPT M on transmitter) HBSN2MF ½ NPT M inlet & ½ NPT F outlet (select ½ NPT M on transmitter) HBSN2MM ½ NPT M inlet & ½ NPT M outlet (select ½ NPT F on transmitter) Options /NC Sour gas service /OXY Oxygen clean service /PP Plugged vent port /3 Graphoil packing /MOUNTTF Assemble with Teflon to free issue transmitter /MOUNTLOC Assemble with Loctite to free issue transmitter /T Tested at 6 bar (dry air) for one minute 95.4 [3.76] 1/4-18 NPT PLUG 1/2-14 (MALE) INLET 1/2-14 NPT (FEM) OUTLET 31.8 [1.25] 133.4 [5.25] (OPEN REF.) 127.4 [5.02] (CLOSED REF.) 136.7 [5.38] 31.8 [1.25] 2 VALVE MANIFOLD REMOTE MTG INLET : 1/ 2-14 NPT (MALE) OUTLET : 1/ 2-14 NPT (FEM) VENT : 1/ 4-18 NPT (FEM) MATERIAL OF CONSTRUCTION : SEE ʼH- SERIES MATERIAL SPECʼ.
3 2 Valve Manifold (with optional bracket) Suitable for use with EJ 510, EJ 530, EJX610 or EJX630 series of static pressure transmitters Title Code Description Type HLS2V ½ NPT F inlet & ½ NPT F outlet (select ½ NPT M on transmitter) Options /NC Sour gas service /OXY Oxygen clean service /PP Plugged vent port /3 Graphoil packing /GA G1/2 flexible adapter /BRKC Carbon steel mounting bracket /BRKS Stainless steel mounting bracket /SSB Stainless steel mounting bolts /MOUNTTF Assemble with Teflon to free issue transmitter /MOUNTLOC Assemble with Loctite to free issue transmitter /T Tested at 6 bar (dry air) for one minute 2 OFF 5.5 [0.216] 1/2-14 NPT (FEM) OUTLET 1/2-14 NPT (FEM) INLET 10.4 [0.409] 50.8 [2.000] 152.4 [6.000] (OPEN REF.) 146.4 [5.764] (CLOSED REF.) 1/4-18 NPT (FEM) VENT 30.0 [1.181] 28.6 [1.125] 2 VALVE MANIFOLD REMOTE MTG INLET : 1/2-14 NPT (FEM) OUTLET : 1/2-14 NPT (FEM) VENT : 1/4-18 NPT (FEM) MATERIAL OF CONSTRUCTION : SEE ʼH-SERIES MATERIAL SPECʼ.
4 2 Valve Direct Mounting Manifold Suitable for use with EJ 310, EJ 430 and EJ 440 series of static pressure transmitters Title Code Description Type HDS2HLH ½ NPT F inlet & ¼ NPT F vent (unplugged) Options /NC Sour gas service /OXY Oxygen clean service /PP Plugged vent port /3 Graphoil packing /BRKC Carbon steel mounting bracket /BRKS Stainless steel mounting bracket /SSB Stainless steel mounting bolts /MOUNT Assemble to free issue transmitter /T Tested at 6 bar (dry air) for one minute 1/2-14 NPT (FEM) INLET 113.0 [4.449] (OPEN REF.) 41.3 [1.625] 28.6 [1.125] 2 OFF 12.0 [0.472] MTG HOLES 1/4-18 NPT (FEM) VENT M6 x 1.0p MTG HOLES 8.3 [0.326] 114.3 [4.500] (OPEN REF.) 111.3 [4.382] (CLOSED REF.) 24.0 [0.945] M10 x 1.5p MTG HOLES 2 VALVE MANIFOLD DIRECT MTG INLET : 1/2-14 NPT (FEM) VENT : 1/4-18 NPT (FEM) MATERIAL OF CONSTRUCTION : SEE ʼH-SERIES MATERIAL SPECʼ.
5 3 and 5 Valve Direct Mounting Manifolds Suitable for use with EJA/X series of differential pressure transmitters Title Code Description Type HDS3MA 3 valves with ½ NPT F inlet HDS5MA 5 valves with ½ NPT F inlet Options /NC Sour gas service /OXY Oxygen clean service /PP Plugged vent port /3 Graphoil packing /BRKC Carbon steel mounting bracket /BRKS Stainless steel mounting bracket /SSB Stainless steel mounting bolts /MOUNT Assemble to free issue transmitter with teflon /T Tested at 6 bar (dry air) for one minute HDS3MA 2 OFF 1/2-14 NPT (FEM) INELTS 4 OFF Ø12.0 [0.472] 41.3 [1.624] 91.5 [3.602] [OPEN REF] 54.0 [2.126] 110.0 [4.331] 52.2 [2.055] REF. 28.6 [1.125] 2 OFF M10x1.5p 50.2 [1.977] 30.0 [1.181] 211.6 [8.331] (OPEN REF.) 205.6 [8.094] (CLOSED REF.) 3 VALVE MANIFOLD DIRECT MTG. INLETS: 1/2-14 NPT (FEM) MATERIAL OF CONSTRUCTION: SEE 'H SERIES MATERIAL SPEC'. HDS5MA 41.3 [1.624] 105.2 [4.217] (OPEN REF.) 2 OFF 1/2-14 NPT (FEM) INELTS 54.0 [2.126] 138.0 [5.433] 2 OFF M10x1.5p 4 OFF Ø12.0 [0.472] 2 OFF 1/4-18 NPT (FEM) VENTS 52.2 [2.055] REF. 28.6 [1.125] 30.0 [1.181] 102.0 [4.016] 239.6 [9.433] (OPEN REF.) 233.6 [9.197] (CLOSED REF.) 5 VALVE MANIFOLD DIRECT MTG. INLETS: 1/2-14 NPT (FEM) VENTS: 1/4-18 NPT (FEM) MATERIAL OF CONSTRUCTION: SEE 'H SERIES MATERIAL SPEC'.
6 Manifold bracket support Purpose It is essential to fully support impulse/pressure measurement tubing lines, manifolds and instruments. All manifolds are designed to accommodate bracket mounting and support, a full range of brackets with additional U bolts are available. Brackets are produced from 4mm thick carbon steel plate to provide maximum rigidity and support. For full corrosion protection the brackets are shot blasted and zinc sprayed. Stainless Steel bracket are available in selecting Brks. Brackets are designed for panel and wall mounting and give full clearance for ease of handle operation. They are also suitable for vertical and horizontal positioning on 2 pipe-stand. Mounting Bracket for HLS2V and HDS2HLH Models 30.0 (1.18")????? 47.0???? (1.85") Ø10.0 (0.41") Mtg. holes 69.5???? (2.74") 90.0???? (3.54")???????? 35.0???? (1.38") 69.5???? (2.74") 145.0 (5.71")????? 69.5???? (2.74") 90.0???? (3.54") Ø8.5 (0.34") Mtg. holes 10.0 (0.39")????
7 Mounting Bracket for HDS3MA and HDS5MA Models 35.0 (1.38 ) 71.0 (2.80 ) 145.0 (5.71 ) 71.0 (2.80 ) 90.0 (3.54 ) 10.0 (0.39 )
YOKOGAWA ELECTRIC CORPORATION World Headquarters 9-32, Nakacho 2-chome, Musashino-shi Tokyo 180-8750 Japan www.yokogawa.com YOKOGAWA CORPORATION OF AMERICA 2 Dart Road Newnan GA 30265 USA www.yokogawa.com/us YOKOGAWA ELECTRIC ASIA Pte. LTD. 5 Bedok South Road Singapore 469270 Singapore www.yokogawa.com/sg YOKOGAWA CHINA CO. LTD. 3F Tower D Cartelo Crocodile Building No.568 West Tianshan Road Changing District Shanghai, China www.yokogawa.com/cn Yokogawa has an extensive sales and distribution network. Please refer to the European website (www.yokogawa.com/eu) to contact your nearest representative. Euroweg 2 3825 HD Amersfoort The Netherlands www.yokogawa.com/eu YOKOGAWA MIDDLE EAST B.S.C.(c) P.O. Box 10070, Manama Building 577, Road 2516, Busaiteen 225 Muharraq, Bahrain www.yokogawa.com/bh Subject to change without notice Printed in The Netherlands, 3-1301 Copyright