MagnumBoxes MagnumBoxes Shoring length Height ase unit Height top unit Weight 2,00 m 6,84 m 3,00 m / 4,00 m 1,32 m / 1,44 m / 2,00 m 1,75 m / 2,00 m / 2,46 m 1730 kg 7130 kg Compact yet ig enough for large pipe dimensions. The oxes of the Medium and Magnum class have captured a leading position in the market for efficiently laying unusually wide or long pipes. What distinguishes these oxes is their outstanding performance features such as shoring depth up to 6.00 m and trench width of over 4.70 m, with a vertical pipe clearance of up to 2.46 m. As you like it. Extreme culvert heights, extreme culvert lengths. Thanks of the huge range of models in the Medium and Magnum class, E+S is in a position to offer trench oxes for completely different purposes, and with specific design features and performance parameters. If the size of pipe diameter is the crucial factor, trench oxes are called for with a large clearance etween the ottom strut and the ottom edge of the ox panels. For pipes up to 2.50 m diameter. In cases where it is not so much the height as the extreme pipe culvert length which is important, the externally supported MagnumBoxes with large clearance etween the struts are the ideal choice, for pipes up to 6 m long. However different the shoring system may e in size, all the oxes of the compact class from the Lightweight through to the MagnumBox use one and the same strut system. 1
MagnumBoxes I Base unit II Top unit HB Height ase unit HT Height top unit l Length MagnumBoxes (All dimensions in mm) l c h c t pl Pipe culvert length Shoring / trench width Inner width Thickness 2
MagnumBoxes Base units (Height 3,00 m) 802 035 802 042 802 045 802 120 802 205 802 285 A 802 400 802 460 2,00 2,50 4,00 5,08 6,84 t p 0,12 0,16 h c 1,75 l c 1,55 2,05 3,55 4,63 6,38 865,0 970,0 1.060,0 1.165,0 1.230,0 1.390,0 1.686,0 3.565,0 1.730,0 1.940,0 2.120,0 2.330,0 2.460,0 2.780,0 3.372,0 7.130,0 6,30 7,50 8,70 10,20 11,10 12,00 15,24 21,55 69,5 55,7 48,0 41,0 37,7 35,8 28,6 25,8 Base units (Height 4,00 m) 802 100 802 197 A 3,15 t p h c 2,46 2,46 l c 2,70 1.500,0 1.720,0 3.000,0 3.440,0 12,60 13,60 46,0 41,0 Top units (Height 1,32 m) 800 550 800 600 800 650 800 700 800 800 800 900 802 814 2,00 2,50 4,00 5,08 t p 0,12 h c l c 1,55 2,05 3,55 4,63 460,0 524,0 575,0 655,0 690,0 754,0 1.110,0 920,0 1.048,0 1.150,0 1.310,0 1.380,0 1.508,0 2.220,0 2,64 3,30 3,83 4,49 4,88 5,28 6,71 70,0 60,0 55,0 50,8 42,3 44,0 34,2 Top units (Height 1,44 m) 802 815 6,84 t p 0,16 h c l c 6,38 1.494,5 2.989,0 9,85 25,8 Top units (Height 2,00 m) 802 550 802 600 802 700 802 750 3,15 t p h c l c 2,70 840,0 850,0 920,0 980,0 1.680,0 1.700,0 1.840,0 1.960,0 5,80 6,30 6,80 7,40 55,0 60,7 50,8 42,3 Extension ars Short description 850 091 Extension ar GGG 50 850 100 Extension ar GGG 50 850 112 Extension ar HEB 180 850 110 Extension ar HEB 180 850 124 Extension ar HEB 180 850 132 Extension ar HEB 180 850 135 Extension ar HEB 180 850 105 Extension ar HEB 220 850 115 Extension ar HEB 220 850 121 Extension ar HEB 220 850 130 Extension ar HEB 220 850 141 Extension ar HEB 220 0,250 11,2 18,7 28,0 43,0 70,0 100,0 130,0 40,0 58,0 98,0 140,0 180,0 3
MagnumBoxes Trench widths (for extension ars l = 0,55 m) Numer of extension ars n 0 1 2 3 4 5 max. 6 Length extension ars 0,00 0,55 1,10 1,65 2,20 2,75 3,30 0,78 1,22 1,33 1,77 1,88 2,32 2,43 2,87 2,98 3,42 3,53 3,97 4,08 4,52 for ase elements H = 3,00 m 0,88 1,32 1,43 1,87 1,98 2,42 2,53 2,97 3,08 3,52 3,63 4,07 4,18 4,62 for ase elements H = 4,00 m Fromto sizes dependent on spindle adjustment range. Other trench widths possile y comining the two different extension ar lengths l = 0.25 m and l = 0.55 m. Larger trench widths availale on request. Trench widths (for extension ars HEB 180) l 0,000 + 0,780 1,220 1,055 1,495 1,330 1,770 1,880 2,320 2,430 2,870 2,980 3,420 4,080 4,520 for ase units H = 3,00 m 0,880 1,320 1,155 1,595 1,430 1,870 1,980 2,420 2,530 2,970 3,080 3,520 4,180 4,620 for ase units H = 4,00 m Fromto dimensions depend on the spindle adjustment range. Other trench widths are possile y comining different HEB lengths. Larger trench widths are availale on request. Accessories / Spares 850 699 850 600 850 500 HB 0190 F HD 0110 F 302 125 HD 0050 F HD 0013 F IA 0095 F IA 0120 F IA 0130 F IA 0185 F HD 0040 F 861 072 861 076 861 074 861 070 861 071 851 005 IB 0215 F Short description Bar for adjusting the spindles Bolt Connector cast iron (for Medium Boxes, Magnum Boxes, Manhole) Damping sleeve 10 x 24 mm Grease nipple Locating plate closed Metal cap for spindle Metal cap for spindle housing Nut M 12 Nut M 16 Nut M 20 Nut M 30 PE cap for the spindle Pressure eam Pressure eam E+S / Krings (GLS, Medium, Magnum shoring, KS 100) Pressure eam E+S / Krings (GLS, Medium, Magnum shoring, KS 100) Pressure eam E+S / Krings (GLS, Medium, Magnum shoring, KS 100) Pressure eam E+S / Krings (GLS, Medium, Magnum shoring, KS 100) Pressure plate (for Medium Boxes, Magnum Boxes, Manhole) Screw M 12 x 55 0,7 0,195 3,60 1,60 2,35 2,80 2,5 1,8 6,7 4,2 0,1 0,2 0,30 330,6 175,5 236,0 271,0 318,0 17,0 0,06 d 0,024 5 Standard DIN 1481 DIN 71412 DIN 985 4
MagnumBoxes Accessories / Spares (contd.) IB 0310 F IB 0420 F IB 0360 F IB 0601 F 300 100 GB 0070 E GB 0040 E GB 0090 E GB 0030 E 301 010 300 010 HE 0050F ID 0160 F Short description Screw M 16 x 55 Screw M 20 x 180 Screw M 20 x 45 Screw M 30 x 65 Shock asorer Spindle housing, left hand Spindle housing, right hand Spindle left hand heavy duty Spindle right hand heavy duty Spreader complete, left hand heavy duty Spreader complete, right hand heavy duty Spring cotter 6 mm Spring ring A 20 0,143 0,11 0,56 0,17 0,60 4,5 9,4 9,4 17,1 17,1 27,1 27,1 d 0,006 Standard DIN 601 DIN 11024 DIN 127 l l c h c t pl Length Pipe culvert length Trench width Inner width Thickness d A G G / VP G / Box eh Diameter Area Weight Weight per shoring panel Weight per shoring ox Earth pressure max. 5