VH Super Miniature Lighted Pushbutton Switch. Only 10.6mm depth behind panel permits space saving on machinery.

Similar documents
Full-Face, Split-Face, Dual-Color with built-in resistor. Oil and Water-Tight Version to IP65 available.

Only 22.5mm depth behind panel with built-in resistor

Only 22.5mm depth behind panel with built-in resistor

Only 35mm depth behind panel with built-in resistor

High reliability EH-N type

High reliability EH-N type

Only 21.5mm depth behind panel with LED Full Face, Illumination.

A Series. Miniature Control Units

Distinctive Characteristics

General Specifications

A series Switches & Pilot Lights

General Specifications

LW Series offer flexibility in space-saving package

General Specifications

7000 SERIES ROCKER AND PADDLE SWITCHES Overview

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories

General Specifications

MW Series Control Units

Miniature Switches & Pilot Devices

ø8 A8 Series Miniature Control Units

ø10 A1 Series Miniature Control Units

Series LP. Illuminated Pushbutton Switches HOW TO ORDER SPECIFICATIONS: WPL-25

Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions Accessories

ø12 A2 Series Miniature Control Units

Bright illumination face and snap-action switching.

General Specifications

Switches & Pilot Devices

Circuit Breakers. Switching & Controls. Selection Guide NC1V Series Dimensions...

Miniature Switches & Pilot Devices

Distinctive Characteristics

Distinctive Characteristics

TYPICAL SWITCH ORDERING EXAMPLE TERMINALS

Series. Robust and attractive.

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

Distinctive Characteristics

Lighted Pushbutton Switch

General Specifications

Switches & Pilot Devices

TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.

Distinctive Characteristics

JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

AM5 (QV) SWITCHES AM5

General Specifications

Distinctive Characteristics

MPB16 Series 16mm Metal Pushbutton Switches

NRA Series. Between main circuit terminals: 2,000V AC, 1 minute Between main circuit and auxiliary contact: 2,000V AC, 1 minute

General Specifications

Distinctive Characteristics

General Specifications

Illuminated pushbutton, non-illuminated pushbutton, selector, key selector switches

General_technical_data Series

YB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

General Specifications

General Specifications

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator

CIT SWITCHTM ANT SPECIFICATIONS

RU Series Universal Relays

General Specifications

General Specifications

Industrial Relay KML(1C, 2C)

Contents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC

LW Silhouette Series. Illuminated Key Selector Switches Pushbuttons and Illuminated Pushbuttons with Round Guard. LW Silhouette Switches

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

Common features. Installation options. Aesthetic options

Indicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order

General Specifications

Switches & Pilot Devices

Emergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm

TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings

ø25mm TWS Series Control Units

ø22mm LW Series Control Units

3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents

ø22mm HW Series Control Units Control Units

B3F. Miniature, Space-saving Switch

SWITCHES MULTIPLE STATION SWITCHES FAX:

Mechanical Key Switch

Lighted PushButton Switch

Miniature microswitches - Positive break

General Specifications

Magnetic and Hydraulic-Magnetic Circuit Breaker

Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.

Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER

A3S. Pushbutton Switch Series with Square 40-mm Body. Lighted Pushbutton Switch (Square) List of Models

Distinctive Characteristics

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

SERIES. LED-Lit Push-Button Switches and Indicators. switches and indicators. SERIES 2 PRODUCT LINE-UP

General Specifications

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting

DEMEX ISO9001:2000 IP65 22 series

A165-E. Ordering Information. Emergency Stop Switch. For Panel Cutout of 16 mm

Magnetic and Hydraulic-Magnetic Circuit Breaker

Sealed Pushbutton Switches

A1-A01-A02-A03 series Industrial controls

[ Bezel size ] [ From panel front ] [ Shape ] [ Contact rating ] [ Action ] Unibody

Sealed pushbutton switches - bushing Ø 16 mm - momentary

Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton

LUMOTAST FK. General data. Content

22mm Push Buttons and Switches

Transcription:

Super Miniature Lighted Pushbutton Switch Only 10.6mm depth behind panel permits space saving on machinery. Flanged type for panel mounting and without flange type for PB available. FEATUES Depth behind panel : Only 10.6mm LED Full-Face, Dual-olor illumination available. Button Size: 12mm square type, 12 17mm rectangular type Incorporated leaf spring snap action switch assures high reliability and light operating touch. Signal Load urrent and High apacity ontact provided. Accessories: Barriers, Guard overs, Sockets, etc. High Brightness LED type, Super Blue, Super White, Super Green available. Switch onnection N SPEIFIATIONS ontact Electrical ating Insulation esistance Dielectric Strength ontact esistance Mechanical Life Electrical Life Ambient Temperature Ambient Humidity Signal Load urrent Type (Gold plated) A, D30V 0.05A(esistive) 600V A MS between N and terminal 1500V A MS between terminals and ground 50/60Hz for 60sec. at normal ambient temperature and humidity Less than 100m (Initial) at D6V 0.05A High apacity Type (Silver contact with gold plated) A125V, 250V 5A(esistive) More than 100M at 500V D 1000V A MS between N and terminal 1500V A MS between terminals and ground 50/60Hz for 60sec. at normal ambient temperature and humidity Less than 30m (Initial) at D6V 1A Momentary Action :more than 1,000,000 operations Alternate Action : more than 200,000 operations More than 200,000 operations at max. rated load More than 30,000 operations at max. rated load 15 to 50 80% H (max.) OPEATING HAATEISTIS Operating Force (max.) 2.45N Total Travel (max.) 2.5mm

STUTUE BUTTON FILTE (Use with clear button) HOUSING Without Flange With Flange Without Flange With Flange DIMENSIONS 17.78 12 With Flange 12 17mm ect. Button 12mm Square Button 1.4 2.5 (15.6) 5 10.6 1.4 2.5 (15.6) 5 10.6 N 2.05 0.5 16 22.8 17 N 17.7 12 0.5 2.05 16 Top View Top View

DIMENSIONS 13.6 2.5 12 Without Flange 12 17mm ect. Button 12mm Square Button 0.6 (16) 2.5 4 11.4 0.6 (16) 4 11.4 1 15.24 N 18.6 17 2 20.3 N 13.6 12 0.5 1 15.2 0.5 Top View Top View INTENAL ONNETION AANGEMENTS LED (ed, Green, Yellow) Dual-olor ombination LED Full-Face (ectangular) LED Full-Face (Square) Any Voltage Mono-olor BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW L2 L1 L2 L1 L Dual-olor L( ) L1 L( ) L2 ed Green Green Yellow Yellow ed

TEMINALS LAYOUT STDP BOTTOM VIEW TEMINALS DTDP INDIATO 12 17mm ect. Button 12mm Square Button Dual-olor Mono-olor Dual-olor Mono-olor BOTTOM VIEW BOTTOM VIEW BOTTOM VIEW N N N N L N N N N N N N N L L TEMINALS DIMENSIONS (BOTTOM VIEW) 12mm Square Button 6 N N 6 N N L1 L2 12 17mm ect. Button 2.54 N N N N L 6 6 L2 L1 2.3 2.3 Mono-olor Dual-olor Mono-olor Dual-olor 2.3 2.3 TEMINAL SHAPE / PB HOLE UT-OUT TEMINAL SHAPE PB hole cut-out (BOTTOM VIEW) 3 1.6 5.3 0.8 2.05 0.5 2 1 4 0.3 0.5 8-1.2 2.54-1.2 Soldering Terminal PB Terminal Mono-olor Dual-olor In case of mounting switches side by side, Please note there is a 0 difference between Square type and ectangular type.

LED DATA LED ATINGS ITEM Max. operating current I FM (ma) D reverse voltage V (V) Forward voltage V F (V) ecommended operating current I F (ma) urrent educed Factor (Over 25 working Temperature) Wiring Diagram ed, Yellow 20 10 4.2 7 Mono-olor Green S. Blue S. White S. Green 20 20 20 20 10 4 4 4 4.2 3.3 2. 3.3 16.2 6.8 3.8 Dual-olor ed Green Yellow 30 30 30 10 10 10 4 4.4 4.2 20 20 20 0.4mA/ 0.4mA/ Fig.1 Fig.2 IF Fig.1 VF LED POTETION ESISTO As LED protection resistor is not built-in, please apply external resistor according to following: Standard Brightness Voltage Mono-olor Dual-olor (V) ed, Yellow Green S. Blue S. White S. Green ed Green Yellow 5( 5%) 130 1/8W 51 1/8W 160 1/8W 240 1/8W 510 1/8W 51 1/8W 33 1/8W 43 1/8W 12( 5%) 1300 1/4W 510 1/4W 10 1/4W 1300 1/4W 2400 1/4W 430 1/4W 30 1/4W 30 1/4W 24( 5%) 3300 1/2W 1300 1/2W 2200 1/2W 3000 1/2W 5600 1/2W 1000 1/2W 1000 1/2W 1000 1/2W Lower Brightness Voltage Mono-olor (V) ed Green Yellow S. Blue S. White S. Green 5( 5%) 240 1/8W 1 1/8W 270 1/8W 430 1/8W 550 1/8W 1500 1/8W 12( 5%) 1800 1/4W 830 1/4W 2700 1/4W 2200 1/4W 2700 1/4W 6800 1/4W 24( 5%) 4300 1/2W 2200 1/2W 5600 1/2W 5100 1/4W 6800 1/4W 15K 1/4W Vcc Vcc IF IF VF Fig.2 The value of the series resistor can be determined by the formula: Vcc IF VF Vcc: Supply Voltage VF : Forward Voltage IF : Forward urrent With Guard over * Pulse Lighting Pulse Width Pw = 100 s Duty atio D = 10 1 IFM = 120mA (any color) PANEL LAYOUT / PANEL UT DIMENSIONS 12mm Square Button Panel Layout Panel ut Dimensions With Barriers Without Barriers 17.78 17.78 17.78 17.78n 0.5 23.08 0.15 0.1 0.15 0.1 16.2 17.78(n 1) 0.15 0.1 20.3 18.(n 1) 0.15 0.1 23.1 18.(n 1) 1 * Panel ut Dimension should be after panel paintings. n : number of switches Tolerance : 0.4mm

PANEL LAYOUT / PANEL UT DIMENSIONS Panel Layout Panel ut Dimensions With Guard over.4 10.1 10.1 16.2.4(n 1).4n 1 12 17mm ect. Button Panel Layout Panel ut Dimensions Without Barriers 17.7 17.7 22.8.5 22.8(n 1) 22.8n With Barriers 28.1 25.6 23.(n 1) 28.1 23.(n 1) 1 With Guard over 26.4 10.1 10.1.5 26.4(n 1) 26.4n 1 Panel thickness: 1.0 3.2mm Panel thickness: 1.0 2.5mm(Guard over use) n : number of switches

PANEL LAYOUT / PANEL UT DIMENSIONS AESSOIES 4.2 4.2 14.7 4.4 14.7 4.4 enter Barrier -075-K -075-G Side Barrier -076-K -076-G 6.5 6.5-108-K -108-H -2252-K -2252-H.4 10.1 10. 26.4 10.1 10. 6.5 6.5 17.3.4 10.1 10. 17.5 22.4 26.4 10.1 10. 17.5 18.2 18.2.4(n 1) 18.2 t With Flange In case of Group Mounting, please leave space as below. With Flange, With Barriers more than 3.0 In case of Group Mounting, please more than 3.0 leave space as below. more than 3.0 more than 3.0 BAIES In case of mounting switches in series, barriers can be used to prevent inadvertent pushing neighbor switch. Part No. Gray enter Barrier Side Barrier GUAD OVE (WITH FLANGE) Guard over prevents inadvertent and unintentional operations. 12mm Square Button 12 17mm ectangular Button Part No. Square ect. Gray Gray * The cover to be opened 0 and stopped. GUAD OVE (WITHOUT FLANGE) 12mm Square Button 12 17mm ectangular Button Part No. Square Gray -2026-K -2026-H ect. -2253-K Gray -2253-H * The cover to be opened 0 and stopped. Panel ut Dimensions for without flange guard cover panel 10 10 t 23.4 26.4(n 1) PB Panel thickness: 1.0 3.2mm

AESSOIES SOKET Non esistor Built-in esistor N N N N 17.2 2.54 17.2 Soldering Terminal 16 Soldering Terminal 16 Soldering Terminal Voltage olor 5V 12V 24V Non esistor ed, Yellow -3631-1 130 1/2W -3632-1 1300 1/2W -3633-1 3300 1/2W Green S. Blue S. White S. Green -3631-2 51 1/2W -3632-2 510 1/2W -3633-2 1300 1/2W -3631-3 160 1/2W -3632-3 10 1/2W -3633-3 2200 1/2W -3631-4 240 1/2W -3632-4 1300 1/2W -3633-4 3000 1/2W -3631-5 510 1/2W -3632-5 2400 1/2W -3633-5 5600 1/2W -1052 Note 1. Socket to be used for Solder terminal type of Switch Unit. Note 2. Socket not to be used for ectangular switch unit. Note 3. Socket not to be used for Dual-olor type. FILTE DIMENSIONS Legend Face Legend Face 10.35 1.4 15.35-5 1.35 10.4-085 Please order replacement parts with Part No. Button/Filter Item Square Button ect. Button Square Filter ect. Filter olor -0858-1 -3-1 -085- -5- EPLAEMENT PATS ed Green Yellow Milk-White lear * -0858-1G -3-1G -085-G -5-G -0858-1Y -3-1Y -085-Y -5-Y -0858-1M -3-1M -085-M -5-M -0858-2 -3-2 -0858-1K -3-1K * Non illuminated only

ODEING ODE LED Illumination 1 2 M A L OPEATION Momentary Alternate Indicator Please note Alternate type is ava ilable only for Squre Butten ONTAT 0 Indicator 1 2 3 4 SPDT DPDT SPDT DPDT 0.05A30VA D 0.05A30VA D 5A125V / 250VA 5A125V / 250VA BUTTON SHAPE S Square W ect. ILLUMINATION TYPE 70 ed 80 Green 0 Yellow Full-Face : 14 S. Blue Put color no. into the frame 1 16 S. White 18 S. Green Without LED 7 8 ed Dual-olor : Put color Green no. into the frame 1,2 Yellow (78,8,7) TES 1) In case of Dual-olor, button should be (clear) with Milk-White filter or Milk-White button. 2) Please be noted that the color of "Yellow" for LED, Button, Filter is actually "Orange Yellow" not Lemon Yellow. TEMINAL S Solder PB FILTE 1 ed 2 Green 3 Yellow 4 Milk-White Without Filter Note : Filter not to be used with colored button. HOUSING OLO K G Gray FLANGE 1 Without Flange 2 With Flange BUTTON OLO * G Y K M ed Green Yellow Milk-White lear Without Button * Non illuminated only