GS 3/GS 3 M SERIES Chemical protection Can be combined with various full-face masks One glove for all tasks WIPAN C / CK / CK+ FIREMAN SA/BF GS 3 SERIES P. 50 Tel.: +49(0)7234-9 48 59-0 www.tesimax.de
GS 3/GS 3 M SERIES - DESIGN Suit description, GS 3 & GS 3 M series One-piece complete chemical/fire brigade protection suit (CPS) with replaceable visor The chemical protection suits (CPS) of this series are tested and certified in accordance with DIN EN 943 Part 1 and (partly) DIN EN 943 Part 2 (emergency teams (ET), for unrestricted use in fire brigades) according to Directive 89/686/EEC. Type 1b = gas-tight chemical protection suit with breathing air supply worn outside the chemical protection suit, for example compressed air equipment. All popular firefighter helmets and industrial hard hats can be worn over the suit. We recommend a helmet, for example according to EN 443:2008 for firefighter helmets, to DIN EN 397 for industrial hard hats and to EN 12492 for mountaineering helmets (see accessories).! Standard equipment, GS 3 series One-piece protection suit with form rubber seal in the hood for secure fit under full-face masks. This CPS unites excellent quality with high-grade materials. The wide face cutout is surrounded with a special seal made from high-performance fluorelastomer that allows the use of most popular full-face masks. Five-finger exchangeable chemical protection gloves with the TESIMAX exchange system are fitted (standard: size 10). Inner or overgloves are not generally required. For models and possible alternatives see the model description. FIREMAN SA/BF safety boots, size 46, certified to DIN EN 15090, DIN EN ISO 20345 and DIN EN 13832-3 are exchangeable (TESIMAX replacement system). For other sizes (43 47) see Accessories. The protection suits can optionally be fitted with footlets made from suit material. In combination with suitable safety boots, as described. Some CPS suit models are equipped with Actifort Heavy Duty safety boots to DIN EN 344 and DIN EN 345 (see models). These boots are resistant against chemicals such as oils and grease. The 130 cm long, gas- and liquid-tight zip is fitted horizontally across the back. It is protected with a labyrinth cover and closes from left to right. The suit features one safety (exhalation) valves with an additional splash cover made from suit fabric. All CPS of this series are prepared for later installation of an external F-AU 4 series forced ventilation system for internal ventilation (see Accessories). The suit is supplied in a black, tear-resistant storage bag for flat storage. For other bags see Extras.! Standard equipment, GS 3 M series As for GS 3 but with permanently built-in mask. A choice of several tested full-face masks of various makes is available. Contact TESIMAX for further information. The mask is included in the price. The standard normal-pressure version of the GS 3 M CPS has an EPDM full-face mask (for firefighters) or a full-face mask made from technical rubber (for industry use). For further tested full-face mask versions see Accessories. + For further options see CPS Series Accessories. Tel.: +49(0)7234-9 48 59-0 www.tesimax.de P. 51
GS 3/GS 3 M SERIES - POLYRAN-L Material description, GS 3 / GS 3 M POLYRAN-L PA Matrix base fabric coated on both sides with POLYRAN (Performance TP) Characteristics: Extremely light-weight and flexible Reusable, washable, excellent mechanical properties (tear-, abrasion- and perforation-resistant) Excellent chemicals resistance to most acids and alkalis Applications: Use in industry, pharmaceutics and clinics or as training suit for firefighters Colour: Yellow or red (optional) Approval: DIN EN 943 Part 1 1b (industry) Ex-area zone 0, DIN EN 14126, DIN EN 1149, EN 1073-2, SOLAS Weight: 4 kg (without extras) Lifespan: Up to 15 year according to manufacturer s guideline Protective gloves: Telblue in sizes 9 and 10 (please specify when ordering) Alternatives: Neotex, Alpha Tec (please specify when ordering) Boot sizes from 43 to 47 (please specify when ordering) Safety boots Actifort Heavy Duty to DIN EN 344 and DIN EN 345 - Alternative: Footlets made from suit material Ordering data: Sizes 160 to 175 cm, order no.: 0222-151 M Sizes 170 to 185 cm, order no.: 0222-151 L Sizes 180 to 190 cm, order no.: 0222-151 XL (standard) Sizes 190 to 200 cm, order no.: 0222-151 XXL Ordering data, GS 3 M Size 160 to 175 cm, order no.: 0223-151 M Size 170 to 185 cm, order no.: 0223-151 L Size 180 to 190 cm, order no.: 0223-151 XL (standard) Size 190 to 200 cm, order no.: 0223-151 XXL Property rating, GS 3/GS 3 M POLYRAN-L Mechanical resistance Heat: Hot vapour at about 350 C P. 52 Tel.: +49(0)7234-9 48 59-0 www.tesimax.de
GS 3 SERIES - TSO plus Material description, GS 3 TSO plus The TSO plus fabric consists of a multi-layer foil laminate (ABC barrier film core), combined with a physically rugged matrix base fabric. It has very good chemicals resistance. TSO plus offers: + High mechanical stability, including high-quality thermo-taped ultrasonic seam seal + Good protection against gasses + Excellent chemicals resistance (tested to DIN EN 943-2 fire brigades) + Good protection from liquids (e.g. test against liquid war gasses to FINABEL 0.7 C) + Good dust-tightness (for example radioactive particles; tested to EN 1073-2) + Good wearing comfort through ultra lightweight design + Non-adhering top layers for better decontamination (nano effect) + Good antistatic and insulating properties (tested to EN 1149) This suit is packaged in foil for safe long-term storage (5 years). Applications: Pharmaceuticals, clinics, military and civil defence, industry and fire brigades Colour: Yellow Approval: DIN EN 943 Part 2 (ET) 1b, limited use Ex-area zone 0 DIN EN 14126, DIN EN 1149, EN 1073-2, SOLAS Weight: Less than 2 kg (without extras) Lifespan: Up to 10 year according to manufacturer s guideline Protective gloves: WIPAN C in sizes 9 to 10 (please specify when ordering) Alternatives: WIPAN CK/CK+, Butoflex (please specify when ordering) Boot sizes 43 to 47 (please specify when ordering) or optionally footlets with drip cuffs Ordering data, GS 3 TSO plus Sizes 160 to 175 cm, order no.: 0222-163 M Sizes 170 to 185 cm, order no.: 0222-163 L Sizes 180 to 190 cm, order no.: 0222-163 XL (standard) Sizes 190 to 200 cm, order no.: 0222-163 XXL Property rating, GS 3 TSO plus Mechanical resistance* Heat: Hot steam at about 350 C Tel.: +49(0)7234-9 48 59-0 www.tesimax.de P. 53
GS 3/GS 3 M SERIES - SYKAN 2 Material description, GS 3 / GS 3 M SYKAN 2 SYKAN 2 has a PA matrix-base fabric coated with high-performance elastomers. An incorporated high-performance plastic film acts as a protective barrier. Characteristics: Reusable, washable, excellent mechanical properties (tear-, abrasion- and perforation-resistant) Outstanding chemicals resistance, for example against acids, alkalis and solvents. Low gas permeability (also against war gasses) Good ageing, weathering and ozone resistance Applications: Pharmaceuticals, clinics, military and civil defence, industry, maritime and fire brigades (unlimited) Colour: Signal orange (outer)/grey (inner) Approval: DIN EN 943 Part 2 (ET) 1b (industry & firefighters) Ex-area zone 0 DIN EN 14126, DIN EN 1149, EN 1073-2, SOLAS, MED Weight: 4 kg (without extras) Lifespan: Up to 15 year according to manufacturer s guideline Protective gloves: WIPAN C in sizes 9 to 10 (please specify when ordering) Alternatives: WIPAN CK/CK+, Butoflex (please specify when ordering) Boot sizes from 43 to 47 (please specify when ordering) - Alternative: Footlets made from suit material Ordering data, GS 3: Size 160 to 175 cm, order no.: 0222-212 M Size 170 to 185 cm, order no.: 0222-212 L Size 180 to 190 cm, order no.: 0222-212 XL (standard) Size 190 to 200 cm, order no.: 0222-212 XXL Ordering data, GS 3 M: Size 160 to 175 cm, order no.: 0223-212 M Size 170 to 185 cm, order no.: 0223-212 L Size 180 to 190 cm, order no.: 0223-212 XL (standard) Size 190 to 200 cm, order no.: 0223-212 XXL Property rating, GS 3/GS 3 M SYKAN 2 Mechanical resistance Heat: Hot vapour at about 350 C P. 54 Tel.: +49(0)7234-9 48 59-0 www.tesimax.de
GS 3/GS 3 M SERIES - SYKAN 4 Material description, GS 3 / GS 3 M SYKAN 4 SYKAN 4 has a 100% para-aramide base fabric coated with high-performance elastomers. An incorporated high-performance plastic film acts as a protective barrier. Characteristics: Reusable, washable, excellent mechanical properties (tear-, abrasion- and perforation-resistant) Outstanding chemicals resistance, for example against acids, alkalis and solvents. Low gas permeability (also against war gasses) Good ageing, weathering and ozone resistance Applications: Pharmaceuticals, clinics, military and civil defence, industry, maritime and fire brigades (unlimited) Colour: Signal yellow (outer), grey (inner) Extremely high thermal resilience: - for short periods up to 850 C (combustion) - for short periods up to -196 C (liquid nitrogen) Outstanding mechanical strength over entire service life; very low fabric weight Approval: DIN EN 943 Part 2 (ET) 1a (industry & firefighters) Ex-area zone 0 DIN EN 14126, DIN EN 1149, EN 1073-2, MED Weight: 4 kg (without extras) Lifespan: Up to 15 year according to manufacturer s guideline Protective gloves: WIPAN CK in sizes 9 to 10 (please specify when ordering) Alternatives: WIPAN CK+, Butoflex, Temp-Cook Boot sizes from 43 to 47 (please specify when ordering) - Alternative: Footlets made from suit material Ordering data, GS 3: Size 160 to 175 cm, order no.: 0222-214 M Size 170 to 185 cm, order no.: 0222-214 L Size 180 to 190 cm, order no.: 0222-214 XL (standard) Size 190 to 200 cm, order no.: 0222-214 XXL Ordering data, GS 3 M: Size 160 to 175 cm, order no.: 0223-214 M Size 170 to 185 cm, order no.: 0223-214 L Size 180 to 190 cm, order no.: 0223-214 XL (standard) Size 190 to 200 cm, order no.: 0223-214 XXL Property rating, GS 3/GS 3 M SYKAN 4 Mechanical resistance Heat: Hot vapour at about 350 C Tel.: +49(0)7234-9 48 59-0 www.tesimax.de P. 55
GS 3/GS 3 M SERIES - SILVERFLASH P. 56 Tel.: +49(0)7234-9 48 59-0 www.tesimax.de
GS 3/GS 3 M SERIES - SILVERFLASH Material description, GS 3 / GS 3 M SILVERFLASH SILVERFLASH has a 100% para-aramide base fabric coated with high-performance elastomers. The fabric consists of a five-layered, double-aluminised laminate and three chemicals barrier layers (high-performance plastic). Characteristics: The fabric s outside is permanently electrically conductive (DIN EN 1149-5:2008-04). Very good heat-resistance; outstanding weathering, ageing and ozone resistance Excellent chemicals resistance; low gas permeability (also against war gasses) Applications: Pharmaceuticals, clinics, military and civil defence, industry, maritime and fire brigades (unlimited) Colour: Silver (outer), red (inner) Extremely high thermal resilience: - for short periods up to 850 C (combustion) - for short periods up to -196 C (liquid nitrogen) Blocks radiated heat and efficiently reflects solar radiations to improve the climate inside the suit in action. Outstanding mechanical strength over entire service life; very low fabric weight Approval: DIN EN 943 Part 2 (ET) 1a (industry & firefighters) Ex-area zone 0 DIN EN 14126, DIN EN 1149, DIN EN 11612, DIN EN 469, EN 1073-2 Weight: 4.5 kg (without extras) Lifespan: Up to 15 year according to manufacturer s guideline Protective gloves: WIPAN CK in sizes 9 to 10 (please specify when ordering) Alternatives: WIPAN CK+, Butoflex (please specify when ordering) Boot sizes from 43 to 47 (please specify when ordering) - Alternative: Footlets made from suit material Ordering data, GS 3 Silverflash Size 160 to 175 cm, order no.: 0222-222 M Size 170 to 185 cm, order no.: 0222-222 L Size 180 to 190 cm, order no.: 0222-222 XL (standard) Size 190 to 200 cm, order no.: 0222-222 XXL Ordering data, GS 3 M Silverflash: Size 160 to 175 cm, order no.: 0223-222 M Size 170 to 185 cm, order no.: 0223-222 L Size 180 to 190 cm, order no.: 0223-222 XL (standard) Size 190 to 200 cm, order no.: 0223-222 XXL Property rating, GS 3 SILVERFLASH Mechanical resistance Heat: Hot vapour at about 350 C Tel.: +49(0)7234-9 48 59-0 www.tesimax.de P. 57