TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE 21 TRIPLE OFFSET 31 SPECIAL BUTTERFLY VALVE 67 TECHNICAL FEATURES 73

BUTTERFLY VALVES

The information in this catalog is correct except for error or omission and could be changed without notice. Ref.: BUTTERFLY-202014

TABLE OF CONTENTS CONCENTRIC TYPE 9 HIGH PERFORMANCE 21 TRIPLE OFFSET 31 SPECIAL BUTTERFLY VALVE 67 TECHNICAL FEATURES 73

4 BROAD BUSSINESS EXPERIENCE With more than thirty years of experience worldwide, JLX VALVE has achieved a leading position in the industrial valve sector. The pursuit of excellence, its precision working, and its orientation towards to customers satisfaction make up the identity of the company. These distinctive features have established JLX VALVE as a highly efficient and competitive specialized partner. SPECIFIC AND INNOVATIVE SOLUTIONS JLX VALVE s industrial design department is composed of experts with a solid experience in the industrial valve sector. Each day, they focus on research in order to reach future improvements in our products to offer you the best solution. Moreover, its own advanced facilities let them be adapted to the most specific needs of the customers in short delivery times. WIDE RANGE OF SERVICES JLX VALVE is not just limited to the manufacture of industrial valves, it also contributes with services which may be very useful to fulfill with your different existing requirements for new installations as well as for replacements. Its staff can adapt heating jackets to the most of the valves, modify the ends connection, and offer repair service of valves or technical support. ONE VALVE FOR EVERY NEED JLX VALVE has an extensive range of industrial valves for multiple sectors and uses. The availability of all basic systems with many alternatives and options allows JLX VALVE to offer a specific valve for every need and working condition; from the smallest (1/ ) up to largest diameters (4 ) and from the lowest pressure (20 mbar) to the highest (720 Bar), in various materials: iron, carbon steel, stainless steel, bronze, brass, steel alloys, etc.

www.jlx-valve.com 5 CERTIFICATES MANUFACTURERS PRODUCTS APPROVALS ISO 9001 : 200 certified API Q1 certified PED 97 / 23 / EC certified MANUFACTURING PROGRAM API 6D certified CE Marking (Module H, Category III) in accordance with PED 97 / 23 / EC Fire Safe Available According: - ISO 10497 - API 607 - BS 6755 GOST R certified ATEX SECTORS OF APPLICATION SECTORS OF APPLICATION General Processes Agriculture/ Fertilise Automotive Chemical Mining Nuclear Concentric Type Concentric Type Resilient seated Resilient seated TYPE OF VALVES High Performance Triple Offsets Special Valves Specific Application Optional Application Onshore Oil & Gas Offshore Petrochemical Power generation Shipbuilding / Marine Waste incineration HVAC- Air conditioning Refineries Pulp & Paper Cryogenic service

6 GENERAL HIGHLIGHTS Concentric or Eccentric type. Materials: CI, CS DI, SS, DUPLEX, etc. Seats : Resilent, Ptfe, metal seated. Wafer, Lug, Flanged, Split body. Extended neck for low temperature and cryogenic service. Sizes from 2 to 144. Rating from ANSI125 until ANSI900 lbs. Tests: Thickness, Hardness, Mechanical properties, Spectral analysis, Roughness, Liquid penetrating, Torque, Temperature, Ultrasonic, Fire safe, Low temperature. Full traceability of shell components certificate EN 10204 3.1. NACE MR01.75 wetting parts under request.

www.jlx-valve.com 7 SERVICES CAPACITY The capacity of JLX VALVE is not just limited to the supply of all kinds of valves and fittings, but also it is capable to contribute a complement of services that can be very useful in various existing requirements for new installations or as spares. SPECIFICATIONS According to the specifications and instructions, heating jackets can be adapted to most types of valves. OPERATORS Manoeuvring accessories (handwheels, gearboxes, chains, hydraulic, etc.). ELONGATIONS Heat sinks, stem elongations. ASSEMBLIES Different kinds of special assemblies such as electric or pneumatic actuators (regulation and commissioning included), solenoid valves, regulation panels, limit switches, are jointly for the development of general drawings and operation diagrams. MODIFICATIONS We modify the end connections in relation to the requirement in a short-term delivery (Flanged RTJ, NPT to SW, RF to BW, SW to RF, RF to FF, etc.). COATINGS Paint finishes, special coatings and supply of components in exotic materials and high pressure valves. REPAIR & ADVICE We complement our services with technical support for repairs, modification and / or expansion of facilities with plant visits. External technical advice.

CONCENTRIC TYPE

www.jlx-valve.com 9 CONCENTRIC TYPE

Concentric type butterfly valve RESILIENT SEATED ND 40 - ND 600 PN 10 - PN 16 Wafer concentric type Large size wafer concentric type Double flange concentric type Large size double flange concentric type BILL OF MATERIALS Description Body Disc Stem Seat Stem bushing Actuator CI CI CI 416 DI DI DI 416 CS WCB WCB 420 CS/ CF WCB CF 4 CS/ CFM WCB CFM F316 NBR / EPDM / Viton PTFE Lever, worm gear, pneumatic or electric actuator CF CF CF 4 CFM CFM CFM F316

www.jlx-valve.com CONCENTRIC TYPE 11 PRESENTATION Concentric type butterfly valve, as one of the most resilient seated valves in the industrial fields, has a wide range of applications. This valve is a one piece body (rubber seated) or split body (PTFE seated) for minimum weight and maximum strength. Its disk ensures leak-tight closing, low torque and protects the seat. It s also a stretch resistant valve and has an anti blow-out and replaceable stem. PTFE bushings reduce operating torque as well as provide maximum shaft support and alignment while isolating the stem from the valve body, preventing corrosion in the stem journal and ultimately stem seizure It s available in wafer, lug and flanged type design. HIGHLIGHTS Positive on-off, bi-directional sealing The valves provides di-directional sealing at full rated pressure with identical flow from either direction. Variety seat style JLX VALVE butterfly valve supply various seat style. End of line service for lug style Lug style valves can be used in end of line service, with downstream piping removed. For upstream pressure is excluded between the flange and the seat face by the exclusive JLX VALVE flange seal design, there is no effective force to slide the seat downstream. PTFE bushing It ensures the maximum shaft support and centralized alignment. Wide connection style between disc and stem Pin, spline and square connection are the most usual connection of JLX VALVE butterfly valve. Pin connectiuon is the most economic style. Spline and rectangular connection made the orientation of the stem/disc better to enhance the drop tight sealing and prolongs service life. Integral flange seal Molded into the edge of the seat is an integral flange seal which accomodates weld neck, slip-on, thread and socket flanges. DESIGN STANDARDS PN 10/ PN16 Valve name Soft seat butterfly valve TECHNICAL DATA PN 10/ PN16 Dimensions ND 50- ND 100 Design standard EN 593 Test standard EN 12266 Valve structure Valve actuator Concentric type Lever, worm gear Connection standard EN 1092 150 LB Valve name Soft seat butterfly valve Applications Water, air, oil, gas, steam, etc. 150 LB Dimensions ND 50- ND 100 Design standard API 609 Test standard API 59 Connection standard Wafer type/ double flange: ASME B16.5 LS wafer type/ LS double flange: ASME B16.47 Valve structure Valve actuator Applications Concentric type Wafer type/ LS wafer type: Wafer Double flange/ LS double flange: Double flange Water, air, oil, gas, steam, etc.

12 CONCENTRIC TYPE WAFER CONCENTRIC TYPE PN 10/ PN 16/ 150LB MCLWF Sizes ND 50 to ND 600 TECHNICAL DATA Pressure max. PN 10/PN16: 10 bar Valve seat Soft ring, can be replaced 150 LB: less than 12Inch is 20 bar, other 16 bar Handle 10 lock position Material Body valve: CI, DI, CS Disc and stem connection Without pin Disc: can be coated with some material Pin connection GENERAL DIMENSIONS ND Face to face Length H2 H1 LØ Handwheel Diameter Torque Cv Top Flange ISO-No. 50 43 165 2 275 10 130 65 46 175 275 1 230 0 46 10 97 275 25 340 100 52 200 114 20 30 64 125 56 215 127 290 0 1250 150 56 235 140 290 110 130 F10 200 60 20 174 390 190 3400 F10 200 60 26 174 300 190 3400 F10 250 6 275 200 300 360 5270 F10 300 7 320 225 300 760 7590 F12 350 7 360 240 355 20 10332 F12 400 102 410 300 500 110 13727 F14 450 114 455 325 500 1320 17372 500 127 510 360 600 2077 21447 600 154 535 430 600 4200 304 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com CONCENTRIC TYPE 13 LARGE SIZE WAFER CONCENTRIC TYPE PN 10/ PN 16 MCLLWF Sizes ND 700 to ND 1500 TECHNICAL DATA Pressure max. 10 bar Valve seat Fixed on body, can t be replaced Material Advice large size disc: stainless steel Disc and stem connection Pin connection GENERAL DIMENSIONS ND Face to face Length H2 H1 Ø1 Torque Cv Top Flange ISO-No. 700 165 620 470 700 400 4 750 190 645 520 700 6200 425 00 190 705 50 700 000 54900 900 760 600 760 11000 69490 1000 216 735 655 760 1300 0420 1200 254 930 790 00 1920 123600 1400 279 1110 920 00 24500 20240 F35 1500 279 1165 975 00 29360 232400 F35 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

14 CONCENTRIC TYPE DOUBLE FLANGE CONCENTRIC TYPE PN 10/ PN 16 MCLDF Sizes ND 50 to ND 600 TECHNICAL DATA Pressure max. Less than 12Inch is 20 bar, other 16 bar Valve seat Soft ring, can be replaced Material Body valve: CI, DI, CS Handle 10 lock position Disc: can be coated with some material Disc and stem connection Without pin, pin connection GENERAL DIMENSIONS ND Face to face Length H2 H1 H3 Handwheel Diameter Torque Cv Top Flange ISO-No. 50 10 150 65 275 10 130 65 112 165 0 275 1 230 0 114 172 100 275 25 340 100 127 17 114 20 30 64 125 140 210 122 290 0 1250 150 140 235 130 290 110 130 F10 200 152 266 155 390 190 3400 F10 200 152 275 155 300 190 3400 F10 250 165 20 200 300 360 5270 F10 300 17 395 21 300 760 7590 F12 350 190 413 255 355 20 10332 F12 400 216 415 20 500 110 13727 F14 450 222 450 305 500 1320 17372 500 229 490 30 600 2077 21447 600 267 550 445 600 4200 304 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com CONCENTRIC TYPE 15 LARGE SIZE DOUBLE FLANGE CONCENTRIC TYPE PN 10/ PN 16 MCLLDF Sizes ND 700 to ND 1500 TECHNICAL DATA Pressure max. 10 bar Valve seat Fixed on body, can t be replaced Material Advice large size disc: stainless steel Disc and stem connection Pin connection GENERAL DIMENSIONS ND Face to face Length H2 H1 Ø1 Torque Cv Top Flange ISO-No. 700 292 620 470 700 400 4 750 31 645 520 700 6200 425 00 31 705 50 700 000 54900 900 330 760 600 760 11000 69490 1000 410 735 655 760 1300 0420 1200 470 930 790 12 1920 123600 1400 530 1110 920 12 24500 20240 F35 1500 530 1165 975 12 29360 232400 F35 1600 1295 1010 65000 27700 F35 100 670 1475 1115 75000 352760 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

16 CONCENTRIC TYPE Concentric type butterfly valve PTFE SEATED ND 40 - ND 300 PN 10 BILL OF MATERIALS Items 1 2 3 4 5 6 Description Body Disc Stem Seat Bushing O Ring Material of construction Cast Iron + PTFE Stainless Steel + PTFE Stainless Steel PTFE PTFE EPDM Specifications A126 Class B + PTFE A351 CFM + PTFE AISI 316 - - -

www.jlx-valve.com CONCENTRIC TYPE 17 PRESENTATION Concentric type butterfly valve, as one of the most resilient seated valves in the industrial fields, has a wide range of applications. This valve is a one piece body (rubber seated) or split body (PTFE seated) for minimum weight and maximum strength. Its disk ensures leak-tight closing, low torque and protects the seat. It s also a stretch resistant valve and has an anti blow-out and replaceable stem. PTFE bushings reduce operating torque as well as provide maximum shaft support and alignment while isolating the stem from the valve body, preventing corrosion in the stem journal and ultimately stem seizure It s available in wafer, lug and flanged type design. HIGHLIGHTS Positive on-off, bi-directional sealing The valves provides di-directional sealing at full rated pressure with identical flow from either direction. Variety seat style JLX VALVE butterfly valve supply various seat style. End of line service for lug style Lug style valves can be used in end of line service, with downstream piping removed. For upstream pressure is excluded between the flange and the seat face by the exclusive JLX VALVE flange seal design, there is no effective force to slide the seat downstream. PTFE bushing It ensures the maximum shaft support and centralized alignment. Wide connection style between disc and stem Pin, spline and square connection are the most usual connection of JLX VALVE butterfly valve. Pin connectiuon is the most economic style. Spline and rectangular connection made the orientation of the stem/disc better to enhance the drop tight sealing and prolongs service life. Integral flange seal Molded into the edge of the seat is an integral flange seal which accomodates weld neck, slip-on, thread and socket flanges. DESIGN STANDARDS TECHNICAL DATA Valve name Concentric type Butterfly Valve Dimensions ND40 - ND300 Design standard API 609 Mounting pad ISO 5211 Valve connection Valve actuator Wafer/Lug/FF or RF flanges Lever, worm gear Face to face API 609; EN 55 1-20 series, etc.* Seat PTFE Flange drilling DIN 2501 PN10 Backseat Viton/EPDM/Silicon Inspection and test API 59 Applications Water, air, oil, gas, steam, etc.

1 CONCENTRIC TYPE PTFE SEAT CONCENTRIC TYPE PN 10 MCLPTFE Sizes ND 40 to ND 300 GENERAL DIMENSIONS ND L H1 H2 H3 No ISO 5211 ØN ØC1 n1-ød1 DIN 2501 PN16 ØC n-ød n-m ØZ ØF H 40 33 12 73 29 F05 65 50 50 110 4-Ø1 4-M16 12.6 12.1 9 50 43 135 73 29 F05 65 50 50 125 4-Ø1 4-M16 12.6 12.1 9 65 46 135 0 29 F05 65 50 50 145 4-Ø1 4-M16 12.6 12.1 9 0 46 13 90 29 F05 65 50 50 160 -Ø1 -M16 12.6 12.1 9 100 52 15 116 29 90 70 70 10 -Ø1 -M16 15.77 14.1 11 125 56 175 130 29 90 70 70 210 -Ø1 -M16 1.92 1.1 14 150 56 1 14 29 90 70 70 240 -Ø22 -M20 1.92 1.1 14 200 60 230 10 35 F10 125 102 102 295 12-Ø22 12-M20 22.1 22.1 17 250 6 270 220 35 F10 125 102 102 355 12-Ø26 12-M24 2.45 2.1 22 300 7 300 255 35 F10 125 102 102 410 12-Ø26 12-M24 31.6 2.1 22 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com NOTES CONCENTRIC TYPE 19

20 HIGH PERFORMANCE

www.jlx-valve.com 21 HIGH PERFORMANCE

HIGH PERFORMANCE 2-60 150 LB - 600 LB BILL OF MATERIALS Description Body Disc Stem Seat Stem packing Operator CS WCB WCB 420 CS/ CF WCB CF 4 CS/ CFM WCB CFM F316 PTFE/RPTFE PTFE Worm gear CF CF CF 4 CFM CFM CFM F316

www.jlx-valve.com 23 HIGH PERFORMANCE PRESENTATION JLX VALVE high performance butterfly valve features an eccentrically mounted disc and are known for their wide application range and shutoff capability. It can achieve zero leakage easily and ensure more reliable sealing because of the resilient seat design. Resilient seat design also can achieve low torque so as to cost-effective of choosing actuator. Soft materials, such as PTFE, have excellent applicability to acid or other media, thus they use improves applicability of valves to various services. The seat constructions with its double offset provides excellent controllability, bubble tight shutoff, longer seat life as well as a smooth operation. HIGHLIGHTS Gland flange Applies load against packing gland to prevent external leakage. Fully adjustable. Packing gland Separate part from gland flange, preventing uneven load distribution against packing. Top Flange Top flange as per ISO5211 standard can suit for all kinds of actuators such as handles, gear box, electric actuator amd pneumatic actuators. Wedge pins Provide positive mechanical attachment of disc to shaft. Disc 360º uninterrupted spherical edge for sealing. Profile is designed for maximum flow and equal percentage control. Bearings Both above and below the disc, bearings are of composite design: PTFE bonded to epoxy-glass filament wound ring. Used to align shaft, with high capacity, low wear, and low friction coefficient. Body MSS SP-6 design in either wafer or lug configuration. Packing Chevron design TFE prevents external leakage out valve neck to full ASME hydrostatic shell test pressures (150% of C. W. P.). Soft-seat Stem bushing reduces patented bi-directional seat with encapsulated elastomeric o-ring core for resiliency. Common seat materials include TFE, RTFE and UHMWPE. DESIGN STANDARDS Standard Valve name High performance butterfly valve TECHNICAL DATA Standard Dimensions 2-24 Design standard API 609 Test standard API 59 Valve structure Valve actuator High performance Worm gear Connection standard ASME B16.5 Large size Valve name High performance butterfly valve Applications Water, air, oil, gas, steam, etc. Large size Dimensions 2-60 Design standard API 609 Test standard API 59 Connection standard ASME B16.47 Valve structure Valve actuator Applications High performance Worm gear Water, air, oil, gas, steam, etc.

24 HIGH PERFORMANCE WAFER TYPE HIGH PERFORMANCE 150 LB MDO150WF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 43 195 64 24 65 2 ½ 46 200 0 35 113 3 4 215 5 47 172 4 54 242 92 75 35 5 57 255 120 112 65 6 57 305 147 169 1050 F10 64 350 15 305 325 210 F10 10 71 370 200 305 55 320 F12 12 1 425 222 406 1200 5100 F14 14 92 460 247 50 1620 500 F14 16 102 510 316 50 2130 927 1 114 545 342 3100 11400 20 127 565 372 4000 1300 24 154 675 440 500 21600 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com 25 HIGH PERFORMANCE LARGE SIZE WAFER TYPE HIGH PERFORMANCE 150 LB MDO150LWF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 165 770 505 711 650 200 30 190 795 52 711 7960 3740 32 190 45 600 711 950 44070 36 75 645 711 10210 5500 40 216 975 700 762 14620 660 4 254 1170 30 12 2400 99200 56 31 1290 90 39400 13000 F35 60 31 1375 1030 4000 164300 F35 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

26 HIGH PERFORMANCE WAFER TYPE HIGH PERFORMANCE 300 LB MDO300WF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 43 195 64 70 65 2 ½ 4 200 0 95 113 3 4 215 5 112 172 4 54 242 92 146 35 5 59 255 120 24 65 6 59 320 17 305 37 1050 F10 73 365 210 406 52 195 F12 10 3 430 235 50 1390 3050 F14 12 92 470 22 2200 400 14 117 545 312 3450 5395 16 133 50 349 400 7900 1 149 620 36 711 5920 1006 20 159 670 410 711 7900 11300 24 11 715 40 711 1100 1690 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com 27 HIGH PERFORMANCE LARGE SIZE WAFER TYPE HIGH PERFORMANCE 300 LB MDO300LWF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 229 90 510 12 1000 23000 30 229 930 600 12 24245 26520 F35 32 241 990 630 12 26750 31200 F35 36 241 1050 60 2930 39450 F35 40 300 1120 735 3900 50160 4 350 110 0 50690 74500 56 390 1360 90 2120 107450 60 440 1410 1030 9200 124300 F4 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

2 HIGH PERFORMANCE WAFER TYPE HIGH PERFORMANCE 600 LB MDO600WF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 54 225 2.5 125 4 2 ½ 54 245 95 130 6 3 54 275 105 145 132 4 64 275 137.5 19 270 5 7 325 165 406 630 50 F10 6 7 35 200 406 720 50 F12 102 435 232 50 1250 1400 F14 10 117 510 277 2720 2010 12 140 535 302 46 290 14 155 617 329 5237 3900 16 17 665 432 711 90 5000 1 200 715 463 762 12090 6000 20 216 730 492 12 16200 000 24 232 95 525 12 24100 11000 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com 29 HIGH PERFORMANCE LARGE SIZE WAFER TYPE HIGH PERFORMANCE 600 LB MDO600LWF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 292 925 545 3300 13000 F35 30 31 965 565 41300 15400 F35 32 31 1020 670 56000 17500 36 330 1190 730 6000 22360 F4 40 410 1220 735 10000 27600 F4 4 470 120 60 145000 39750 F60 56 530 1415 90 17000 57261 F60 60 600 1450 1030 22000 6500 F60 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

30 TRIPLE OFFSET

www.jlx-valve.com 31 TRIPLE OFFSET

TRIPLE OFFSET 2-60 150 LB - 900 LB Wafer type triple offsets Lug type triple offsets Double flange triple offsets Butt-welding type triple offsets BILL OF MATERIALS Description Body Disc Stem Seat Seal Ring Pin Stem Packing Operator CS CS/ CF WCB WCB WCB CF 420 4 13Cr/HF 13Cr/HF SS304 + Graphite 420 4 CS/ CFM WCB CFM F316 13Cr/HF SS316+Graphite F316 PTFE/Graphite PTFE/RPTFE Worm PTFE gear CF CF CF 4 Body 4 SS304 + Graphite CFM CFM CFM F316 Body F316

www.jlx-valve.com TRIPLE OFFSET 33 PRESENTATION Soft seat butterfly valves don t allow a good performance when used for severe application or frequent open-closing. The perfect solution for HTF service is triple offset butterfly because it provides an efficient and reliable operation. This type of design reduces torque value, and the metal-metal seat ensures a perfect seal on changes in pressure and / or temperature. In addition, the geometry of the seat allows minimal wear because it is only in contact with the disc at the time of 0 rotation. Moreover, friction-free closing of JLX VALVE triple offset butterfly valve offers a low maintenance and an extended work life. It has double block and bleed function. It s available in wafer, lug type, double flange and butt-welding end design. HIGHLIGHTS Multi layer sealing structure The JLX VALVE triple offset butterfly valves are designed with a metallic composite cone beveling, that takes advantage of cam effect, thus valve seat could be released from seal ring through the whole switching process. Then, zero friction exists between valve seat and plate seal ring providing friction-free stroking throughout the valve extends valve life, ensures no over-travel of the disc, allows for a lower torque for actuator to be fitted and ensures bubble tight closure of the valve, resulting in zero-leakage performance. The butterfly plate seal ring is designed as multi layer seal ring. This seal compresses on a radial basis and moves flexibly and elastically. All alloy hard sealing Triple offset JLX VALVE valves are provided with three dimensional eccentric sealing structures. The valves are designed and manufactured with unique techniques and dedicated facilities for maximum machined accuracy. This ensures full cone match of sealing pair, and eliminates the intervention and abrasion between sealing faces. The product features small switching resistance, reliable sealing performance, reduced sealing face abrasion and a vastly extended valve life. The alloy hard sealing allows higher pressure and temperature applications whilst still providing bubble-tight shut off. Eccentricities 1st eccentricity The shaft is diverged from centerline of the sealing surface. 2nd eccentricity The shaft is diverged from centerline of the pipeline and valve. These two eccentricities are designated for friction reduction between the valve seat and seal ring when opening and closing the valve. 3rd eccentricity It makes the valve seat completely separated from the seal ring through the geometric shape, during the whole process of opening and dosing the valve. The special eccentric combination not only makes use of the cam effect, but also completely eliminates friction. It enables no friction between the valve seat and seal ring on the valve plate, to eliminate possible abrasion and leakage, in the 90º stroke of the valve. DESIGN STANDARDS Valve name Triple Offset Butterfly Valve Design standard API 609 Test standard API 59 Connection standard Standard size: ASME B16.5 Large size: ASME B16.47 Leakage class for positive direction Class VI TECHNICAL DATA Dimensions 2-60 Valve connection Wafer/Lug/Double flange/butt-weld ends Valve actuator Lever, worm gear Disc and stem connection Pin connection, key & pin connection Applications Water, air, oil, gas, steam, etc. Laminate seal ring 13Cr/HF Seat

34 TRIPLE OFFSET TRIPLE OFFSET BUTTERFLY VALVE WAFER TYPE WAFER TYPE TRIPLE OFFSETS 150 LB MTO150WF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 43 210 75 26 5 2 ½ 46 220 90 32 109 3 4 230 95 0 165 4 54 240 115 142 31 5 56 296 13 305 264 64 F10 6 57 310 147 305 362 932 F10 64 350 15 406 75 1970 F12 10 71 402 215 406 100 269 F14 12 1 455 252 50 1510 3930 F14 14 92 505 27 50 245 5290 16 102 560 317 250 7726 1 114 565 342 4536 956 20 127 605 372 5474 1210 24 154 675 440 711 240 1900 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 35 LARGE SIZE WAFER TYPE TRIPLE OFFSETS 150 LB MTO150LWF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 165 770 505 711 1162 27600 30 190 795 52 762 14340 33700 32 190 45 600 762 1756 3500 36 75 645 12 23345 45600 40 216 975 700 12 2200 65320 F35 4 254 1170 30 44400 96000 56 31 1290 90 64240 139700 60 31 1375 1030 73520 16030 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

36 TRIPLE OFFSET WAFER TYPE TRIPLE OFFSETS 300 LB MTO300WF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 43 210 2.5 7 5 2 ½ 46 225 95 109 3 4 240 105 144 165 4 54 255 127.5 25 31 5 56 315 153 305 412 64 F10 6 59 345 17 305 79 62 F12 73 400 216 50 1960 1230 F14 10 3 455 247 50 2270 2370 12 92 495 22 270 3520 14 117 555 312 560 472 16 133 50 349 711 635 620 1 149 620 36 762 7356 790 20 159 670 410 762 1051 1000 24 11 760 491 762 1393 1610 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 37 LARGE SIZE WAFER TYPE TRIPLE OFFSETS 300 LB MTO300LWF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 229 90 510 12 2747 22410 F35 30 229 930 600 12 32971 27090 F35 32 241 990 630 41150 33050 36 241 1050 670 53700 42090 40 300 1120 735 6370 4964 4 350 110 0 92970 69350 F4 56 390 1360 940 141600 94390 F4 60 440 1410 1030 12000 10400 F4 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

3 TRIPLE OFFSET WAFER TYPE TRIPLE OFFSETS 600 LB MTO600WF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 54 225 2.5 162 42 2 ½ 54 245 95 20 72 3 54 275 105 305 340 107 F10 4 64 275 137.5 406 633 250 F12 5 7 325 165 50 960 416 F12 6 7 35 200 50 1630 600 102 435 232 3540 1079 10 114 510 277 5462 170 12 140 535 302 601 2620 14 155 617 329 711 10913 4062 16 17 665 432 762 15757 5292 1 200 715 463 12 1905 7395 F35 20 216 730 492 12 250 9320 F35 24 232 95 525 44799 1357 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 39 LARGE SIZE WAFER TYPE TRIPLE OFFSETS 600 LB MTO600LWF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 292 925 545 66593 26 30 31 965 565 79506 23400 F4 32 31 1020 670 90160 26370 F4 36 330 1190 730 117500 3216 F4 40 410 1220 735 155240 4051 F60 4 470 120 60 227000 57460 F60 56 530 1415 90 27000 7210 F60 60 600 1450 1030 314000 976 F60 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

40 TRIPLE OFFSET WAFER TYPE TRIPLE OFFSETS 900 LB MTO900WF Sizes 4 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 4 92 350 10 406 36 210 F14 5 102 395 210 50 150 34 6 102 410 225 50 210 500 140 455 270 4692 923 10 155 510 310 711 6596 1430 12 17 555 340 762 7955 214 14 290 50 365 12 173 3025 16 310 400 12 23600 4130 F35 1 330 650 445 33734 5692 F35 20 350 700 47 44707 7430 24 350 920 50 67240 10700 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com NOTES TRIPLE OFFSET 41

42 TRIPLE OFFSET BUTTERFLY VALVE LUG TYPE LUG TYPE TRIPLE OFFSET 150 LB MTO900LG Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 43 210 75 26 5 2 ½ 46 220 90 32 109 3 4 230 95 0 165 4 54 240 115 142 31 5 56 296 13 305 264 64 F10 6 57 310 147 305 362 932 F10 64 350 15 406 75 1970 F12 10 71 402 215 406 100 269 F14 12 1 455 252 50 1510 3930 F14 14 92 505 27 50 245 5290 16 102 560 317 250 7726 1 114 565 342 4536 956 20 127 605 372 5474 1210 24 154 675 440 711 240 1900 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 43 LARGE SIZE LUG TYPE TRIPLE OFFSET 150 LB MTO900LLG Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 165 770 505 711 1162 27600 30 190 795 52 762 14340 33700 32 190 45 600 762 1756 3500 36 75 645 12 23345 45600 40 216 975 700 12 2200 65320 F35 4 254 1170 30 44400 96000 56 31 1290 90 64240 139700 60 31 1375 1030 73520 16030 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

44 TRIPLE OFFSET LUG TYPE TRIPLE OFFSET 300 LB MTO300LG Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 43 210 2.5 7 5 2 ½ 46 225 95 109 3 4 240 105 144 165 4 54 255 127.5 25 31 5 56 315 153 305 412 64 F10 6 59 345 17 305 79 62 F12 73 400 216 50 1960 1230 F14 10 3 455 247 50 2270 2370 12 92 495 22 270 3520 14 117 555 312 560 472 16 133 50 349 711 635 620 1 149 620 36 762 7356 790 20 159 670 410 762 1051 1000 24 11 760 491 762 1393 1610 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 45 LARGE SIZE LUG TYPE TRIPLE OFFSET 300 LB MTO300LLG Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 229 90 510 12 2747 22410 F35 30 229 930 600 12 32971 27090 F35 32 241 990 630 41150 33050 36 241 1050 670 53700 42090 40 300 1120 735 6370 4964 4 350 110 0 92970 69350 F4 56 390 1360 940 141600 94390 F4 60 440 1410 1030 12000 10400 F4 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

46 TRIPLE OFFSET LUG TYPE TRIPLE OFFSET 600 LB MTO600LG Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 54 225 2.5 162 42 2 ½ 54 245 95 20 72 3 54 275 105 305 340 107 F10 4 64 275 137.5 406 633 250 F12 5 7 325 165 50 960 416 F12 6 7 35 200 50 1630 600 102 435 232 3540 1079 10 114 510 277 5462 170 12 140 535 302 601 2620 14 155 617 329 711 10913 4062 16 17 665 432 762 15757 5292 1 200 715 463 12 1905 7395 F35 20 216 730 492 12 250 9320 F35 24 232 95 525 44799 1357 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 47 LARGE SIZE LUG TYPE TRIPLE OFFSET 600 LB MTO600LLG Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 292 925 545 66593 26 30 31 965 565 79506 23400 F4 32 31 1020 670 90160 26370 F4 36 330 1190 730 117500 3216 F4 40 410 1220 735 155240 4051 F60 4 470 120 60 227000 57460 F60 56 530 1415 90 27000 7210 F60 60 600 1450 1030 314000 976 F60 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

4 TRIPLE OFFSET WAFER TYPE TRIPLE OFFSET 900 LB MTO900LG Sizes 4 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 4 92 350 10 406 36 210 F14 5 102 395 210 50 150 34 6 102 410 225 50 210 500 140 455 270 4692 923 10 155 510 310 711 6596 1430 12 17 555 340 762 7955 214 14 290 50 365 12 173 3025 16 310 400 12 23600 4130 F35 1 330 650 445 33734 5692 F35 20 350 700 47 44707 7430 24 350 920 50 67240 10700 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com NOTES TRIPLE OFFSET 49

50 TRIPLE OFFSET BUTTERFLY VALVE DOUBLE FLANGE TYPE DOUBLE FLANGE TYPE TRIPLE OFFSET 150 LB MTO150DF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 10 210 75 26 5 2 ½ 112 220 90 32 109 3 114 230 95 0 165 4 127 240 115 142 31 5 140 296 13 305 264 64 F10 6 140 310 147 305 362 932 F10 152 350 15 406 75 1970 F12 10 165 402 215 406 100 269 F14 12 17 455 252 50 1510 3930 F14 14 190 505 27 50 245 5290 16 216 560 317 250 7726 1 222 565 342 4536 956 20 229 605 372 5474 1210 24 267 675 440 711 240 1900 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 51 LARGE SIZE DOUBLE FLANGE TYPE TRIPLE OFFSET 150 LB MTO150LDF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 292 770 505 711 1162 27600 30 31 795 52 762 14340 33700 32 31 45 600 762 1756 3500 36 330 75 645 12 23345 45600 40 410 975 700 12 2200 65320 F35 4 470 1170 30 44400 96000 56 530 1290 90 64240 139700 60 530 1375 1030 73520 16030 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

52 TRIPLE OFFSET DOUBLE FLANGE TYPE TRIPLE OFFSET 300 LB MTO300DF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 10 210 2.5 7 5 2 ½ 112 225 95 109 3 114 240 105 144 165 4 127 255 127.5 25 31 5 140 315 153 305 412 64 F10 6 140 345 17 305 79 62 F12 152 400 216 50 1960 1230 F14 10 165 455 247 50 2270 2370 12 17 495 22 270 3520 14 190 555 312 560 472 16 216 50 349 711 635 620 1 222 620 36 762 7356 790 20 229 670 410 762 1051 1000 24 267 760 491 762 1393 1610 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 53 LARGE SIZE DOUBLE FLANGE TYPE TRIPLE OFFSET 300 LB MTO300LDF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 292 90 510 12 2747 22410 F35 30 31 930 600 12 32971 27090 F35 32 31 990 630 41150 33050 36 330 1050 670 53700 42090 40 410 1120 735 6370 4964 4 470 110 0 92970 69350 F4 56 530 1360 940 141600 94390 F4 60 530 1410 1030 12000 10400 F4 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

54 TRIPLE OFFSET DOUBLE FLANGE TYPE TRIPLE OFFSET 600 LB MTO600DF Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 150 225 2.5 162 42 2 ½ 170 245 95 20 72 3 10 275 105 305 340 107 F10 4 190 275 137.5 406 633 250 F12 5 200 325 165 50 960 416 F12 6 210 35 200 50 1630 600 230 435 232 3540 1079 10 250 510 277 5462 170 12 270 535 302 601 2620 14 290 617 329 711 10913 4062 16 310 665 432 762 15757 5292 1 330 715 463 12 1905 7395 F35 20 350 730 492 12 250 9320 F35 24 390 95 525 44799 1357 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 55 LARGE SIZE DOUBLE FLANGE TYPE TRIPLE OFFSET 600 LB MTO600LDF Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 292 925 545 66593 26 30 31 965 565 79506 23400 F4 32 31 1020 670 90160 26370 F4 36 330 1190 730 117500 3216 F4 40 410 1220 735 155240 4051 F60 4 470 120 60 227000 57460 F60 56 530 1415 90 27000 7210 F60 60 600 1450 1030 314000 976 F60 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

56 TRIPLE OFFSET WAFER TYPE TRIPLE OFFSET 900 LB MTO900DF Sizes 4 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 4 229 350 10 406 36 210 F14 5 267 395 210 50 150 34 6 267 410 225 50 210 500 292 455 270 4692 923 10 330 510 310 711 6596 1430 12 356 555 340 762 7955 214 14 31 50 365 12 173 3025 16 406 400 12 23600 4130 F35 1 432 650 445 33734 5692 F35 20 457 700 47 44707 7430 24 50 920 50 67240 10700 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com NOTES TRIPLE OFFSET 57

TRIPLE OFFSET BUTTERFLY VALVE BUTT-WELD END TYPE BUTT-WELDING END TYPE TRIPLE OFFSET 150 LB MTO150BW Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 150 210 75 26 5 2 ½ 170 220 90 32 109 3 10 230 95 0 165 4 190 240 115 142 31 5 200 296 13 305 264 64 F10 6 210 310 147 305 362 932 F10 230 350 15 406 75 1970 F12 10 250 402 215 406 100 269 F14 12 270 455 252 50 1510 3930 F14 14 290 505 27 50 245 5290 16 310 560 317 250 7726 1 330 565 342 4536 956 20 350 605 372 5474 1210 24 390 675 440 711 240 1900 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 59 LARGE SIZE BUTT-WELDING END TYPE TRIPLE OFFSET 150 LB MTO150LBW Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 430 770 505 711 1162 27600 30 450 795 52 762 14340 33700 32 470 45 600 762 1756 3500 36 510 75 645 12 23345 45600 40 550 975 700 12 2200 65320 F35 4 630 1170 30 44400 96000 56 710 1290 90 64240 139700 60 710 1375 1030 73520 16030 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

60 TRIPLE OFFSET BUTT-WELDING END TYPE TRIPLE OFFSET 300 LB MTO300BW Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 150 210 2.5 7 5 2 ½ 170 225 95 109 3 10 240 105 144 165 4 190 255 127.5 25 31 5 200 315 153 305 412 64 F10 6 210 345 17 305 79 62 F12 230 400 216 50 1960 1230 F14 10 250 455 247 50 2270 2370 12 270 495 22 270 3520 14 290 555 312 560 472 16 310 50 349 711 635 620 1 330 620 36 762 7356 790 20 350 670 410 762 1051 1000 24 390 760 491 762 1393 1610 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 61 LARGE SIZE DOUBLE FLANGE TYPE TRIPLE OFFSET 300 LB MTO300LBW Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 430 90 510 12 2747 22410 F35 30 450 930 600 12 32971 27090 F35 32 470 990 630 41150 33050 36 510 1050 670 53700 42090 40 550 1120 735 6370 4964 4 630 110 0 92970 69350 F4 56 710 1360 940 141600 94390 F4 60 710 1410 1030 12000 10400 F4 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

62 TRIPLE OFFSET BUTT-WELDING END TYPE TRIPLE OFFSET 600 LB MTO600BW Sizes 2 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 150 225 2.5 162 42 2 ½ 170 245 95 20 72 3 10 275 105 305 340 107 F10 4 190 275 137.5 406 633 250 F12 5 200 325 165 50 960 416 F12 6 210 35 200 50 1630 600 230 435 232 3540 1079 10 250 510 277 5462 170 12 270 535 302 601 2620 14 290 617 329 711 10913 4062 16 310 665 432 762 15757 5292 1 330 715 463 12 1905 7395 F35 20 350 730 492 12 250 9320 F35 24 390 95 525 44799 1357 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com TRIPLE OFFSET 63 LARGE SIZE BUTT-WELDING END TYPE TRIPLE OFFSET 600 LB MTO600LBW Sizes 2 to 60 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 2 430 925 545 66593 26 30 450 965 565 79506 23400 F4 32 470 1020 670 90160 26370 F4 36 510 1190 730 117500 3216 F4 40 550 1220 735 155240 4051 F60 4 630 120 60 227000 57460 F60 56 710 1415 90 27000 7210 F60 60 710 1450 1030 314000 976 F60 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

64 TRIPLE OFFSET BUTT-WELDING END TYPE TRIPLE OFFSET 900 LB MTO900BW Sizes 4 to 24 GENERAL DIMENSIONS ND Face to face Length H2 H1 Handwheel dø Torque Cv Top Flange ISO-No. 4 190 350 10 406 36 210 F14 5 200 395 210 50 150 34 6 210 410 225 50 210 500 430 455 270 4692 923 10 450 510 310 711 6596 1430 12 470 555 340 762 7955 214 14 490 50 365 12 173 3025 16 510 400 12 23600 4130 F35 1 530 650 445 33734 5692 F35 20 550 700 47 44707 7430 24 590 920 50 67240 10700 Dimensions in mm. Dimensions can be changed without notice. Bigger sizes available under costumer request.

www.jlx-valve.com NOTES TRIPLE OFFSET 65

66 SPECIAL

www.jlx-valve.com 67 SPECIAL

HIGH TEMPERATURE TRIPLE OFFSET 4-60 150 LB - 600 LB DESIGN STANDARDS Valve name High Temperature Butterfly Valve Design standard API 609, ASME 16.34 Test standard API 59 Connection standard ASME B16.5/ASME 16.47/ASME B16.25 TECHNICAL DATA Dimensions 4-60 Valve connection Double Flange/ BW Valve actuator Worm gear Applications Water, air, oil, gas, steam, etc.

www.jlx-valve.com SPECIAL 69 HIGH TEMPERATURE TRIPLE OFFSET MHT BILL OF MATERIALS Description Body Disc Stem Seat Seal Ring Pin Stem Packing Operator 16ºC CF CF 16ºC WCB CF 595ºC WCB CFM XM-19/310H/316H/304H STL XM-19+Graphite/ceramic fibre XM-19/310H/316H/304H Soft PTFE/RPTFE Graphite Worm gear/actuator PTFE 595ºC CF CF 595ºC CFM CFM

70 SPECIAL CRYOGENIC SERVICE TRIPLE OFFSET 2-60 150 LB - 900 LB DESIGN STANDARDS Valve name High Temperature Butterfly Valve Design standard API 609, ASME 16.34 Test standard API 59 Connection standard ASME B16.5/ASME 16.47/ASME B16.25 TECHNICAL DATA Dimensions 4-60 Valve connection Double Flange/ BW Valve actuator Worm gear Applications Special medium, etc.

www.jlx-valve.com SPECIAL 71 CRYOGENIC SERVICE TRIPLE OFFSET MCS BILL OF MATERIALS Description Body Disc Stem Seat Seal Ring Pin Stem Packing Operator -196ºC CF CF 4 STL 304+Graphite 4-196ºC CFM CFM F316 STL 316+Graphite F316-196ºC CF3 CF3 4 STL 304L + Graphite 4L Soft PTFE/RPTFE Graphite Worm gear/actuator PTFE -196ºC CF3M CF3M F316L STL 316L+Graphite F316L -46ºC LCB LCB XM-19/420 13Cr/STL 304-Graphite XM-19/420

72 TECHNICAL FEATURES

www.jlx-valve.com 73 TECHNICAL FEATURES

TECHNICAL FEATURES 74 SIZE ID O C R B D Bolt L LM CLASS 150 CLASS 300 CLASS 600 END FLANGE DIMENSIONS (Raised Face) CLASS 150, 300 & 600 inch. 2 21/2 3 4 5 6 10 12 14 16 1 20 24 26 2 30 32 34 36 2 21/2 3 4 5 6 10 12 14 16 1 20 24 26 2 30 32 34 36 2 21/2 3 4 5 6 10 12 14 16 1 20 24 26 2 30 32 34 36 mm. 50 65 0 100 125 150 200 250 300 350 400 450 500 600 650 700 750 00 50 900 50 65 0 100 125 150 200 250 300 350 400 450 500 600 650 700 750 00 50 900 50 65 0 100 125 150 200 250 300 350 400 450 500 600 650 700 750 00 50 900 inch. 6.00 7.00 7.50 9.00 10.00 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00 34.25 36.50 3.75 41.75 43.75 46.00 6.50 7.50.25 10.00 11.00 12.50 15.00 17.50 20.50 23.00 25.50 2.00 30.50 36.00 3.25 40.75 43.00 45.25 47.50 50.00 6.50 7.50.25 10.75 13.00 14.00 16.50 20.00 22.00 23.75 27.00 29.25 32.00 37.00 40.00 42.25 44.50 47.00 49.00 51.75 mm. 152.4 177. 190.5 22.6 254.0 279.4 342.9 406.4 42.6 533.4 596.9 635.0 69.5 12. 70.0 927.1 94.3 1060.5 1111.3 116.4 165.1 190.5 209.6 254.0 279.4 317.5 31.0 444.5 520.7 54.2 647.7 711.2 774.7.4 971.6 1035.1 1092.2 1149.4 1206.5 1270.0 165.1 190.5 209.6 273.1 330.2 355.6 419.1 50.0 55. 603.3 65. 743.0 12. 939..0 1073.2 1130.3 1193. 1244.6 1314.5 inch. 0.75 0. 0.94 0.94 0.97 1.00 1.12 1.19 1.25 1.3 1.44 1.56 1.69 1. 2.69 2.1 2.94 3.1 3.25 3.56 0. 1.00 1.12 1.25 1.3 1.44 1.62 1. 2.00 2.12 2.25 2.3 2.50 2.75 3.12 3.3 3.62 3. 4.00 4.12 1.00 1.12 1.25 1.50 1.75 1. 2.19 2.50 2.62 2.75 3.00 3.25 3.50 4.00 4.25 4.3 4.50 4.62 4.75 4. mm. 19.1 22.4 23.9 23.9 23.9 25.4 2.4 30.2 31. 35.1 36.6 39.6 42.9 47. 6.3 71.4 74.7 0. 2.6 90.4 22.4 25.4 2.4 31. 35.1 36.6 41.1 47. 50. 53. 57.2 60.5 63.5 69.9 79.2 5.9 91.9 9.6 101.6 104.6 25.4 2.4 31. 3.1 44.5 47. 55.6 63.5 66.5 69.9 76.2 2.6.9 101.6 10.0 111.3 114.3 117.3 120.7 124.0 mm. 3.62 4.12 5.00 6.19 7.31.50 10.62 12.75 15.00 16.25 1.50 21.00 23.00 27.25 29.50 31.50 33.75 36.00 3.00 40.25 3.62 4.12 5.00 6.19 7.31.50 10.62 12.75 15.00 16.25 1.50 21.00 23.00 27.25 29.50 31.50 33.75 36.00 3.00 40.25 3.62 4.12 5.00 6.19 7.31.50 10.62 12.75 15.00 16.25 1.50 21.00 23.00 27.25 29.50 31.50 33.75 36.00 3.00 40.25 inch. 91.9 104.6 127.0 157.2 15.7 215.9 269.7 323.9 31.0 412. 469.9 533.4 54.2 692.2 749.3 00.1 57.3.4 965.2 1022.4 91.9 104.6 127.0 157.2 15.7 215.9 269.7 323.9 31.0 412. 469.9 533.4 54.2 692.2 749.3 00.1 57.3.4 965.2 1022.4 91.9 104.6 127.0 157.2 15.7 215.9 269.7 323.9 31.0 412. 469.9 533.4 54.2 692.2 749.3 00.1 57.3.4 965.2 1022.4 inch. 4.75 5.50 6.00 7.50.50 9.50 11.75 14.25 17.00 1.75 21.25 22.75 25.00 29.50 31.75 34.00 36.00 3.50 40.50 42.75 5.00 5. 6.62 7. 9.25 10.62 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00 34.50 37.00 39.25 41.50 43.50 46.00 5.00 5. 6.62.50 10.50 11.50 13.75 17.00 19.25 20.75 23.75 25.75 2.50 33.00 36.00 3.00 40.25 42.50 44.50 47.00 inch. 0.75 0.75 0.75 0.75 0. 0. 0. 1.00 1.00 1.12 1.12 1.25 1.25 1.3 1.3 1.3 1.3 1.62 1.62 1.62 0.75 0. 0. 0. 0. 0. 1.00 1.12 1.25 1.25 1.3 1.3 1.3 1.62 1.75 1.75 1. 2.00 2.00 2.12 0.75 0. 0. 1.00 1.12 1.12 1.25 1.3 1.3 1.50 1.62 1.75 1.75 2.00 2.00 2.12 2.12 2.3 2.3 2.62 mm. 19.1 19.1 19.1 19.1 22.4 22.4 22.4 25.4 25.4 2.4 2.4 31. 31. 35.1 35.1 35.1 35.1 41.1 41.1 41.1 19.1 22.4 22.4 22.4 22.4 22.4 25.4 2.4 31. 31. 35.1 35.1 35.1 41.1 4.5 44.5 47. 50. 50. 53. 19.1 22.4 22.4 25.4 2.4 2.4 31. 35.1 35.1 3.1 41.1 44.5 44.5 50. 50. 53. 53. 60.5 60.5 66.5 mm. 120.7 139.7 152.4 190.5 215.9 241.3 29.5 362.0 431. 476.3 539. 577.9 635.0 749.3 06.5 63.6.4 977.9 102.7 105.9 127.0 149.4 16.1 200.2 235.0 269.7 330.2 37.4 450.9 514.4 571.5 62.7 65. 12. 76.3 939. 997.0 1054.1 1104.9 116.4 127.0 149.4 16.1 215.9 266.7 292.1 349.3 431. 49.0 527.1 603.3 654.1 723.9 3.2.4 965.2 1022.4 1079.5 1130.3 1193. QTY. 4 4 4 12 12 12 16 16 20 20 24 2 2 2 32 32 12 12 16 16 20 20 24 24 24 2 2 2 2 2 32 12 12 16 20 20 20 20 24 24 2 2 2 2 2 2 Diam. 5/ 5/ 5/ 5/ 3/4 3/4 3/4 7/ 7/ 1 1 11/ 11/ 11/4 11/4 11/4 11/4 11/2 11/2 11/2 5/ 3/4 3/4 3/4 3/4 3/4 7/ 1 11/ 11/ 11/4 11/4 11/4 11/2 15/ 15/ 13/4 17/ 17/ 2 5/ 3/4 3/4 Vb 1 1 11/ 11/4 11/4 13/ 11/ 15/ 15/ 17/ 17/ 2 2 21/4 21/4 21/2 mm. 2.6.9.9.9 95.3 101.6 10.0 114.3 120.7 133.4 133.4 146.1 16. 171.5 209.6 215.9 22.6 247.7 254.0 266.7.9 101.6 10.0 114.3 120.7 120.7 139.7 15. 171.5 177. 190.5 196.9.2 22.6 260.4 273.1 292.1 311.2 323.9 336.6 10.0 120.7 127.0 146.1 165.1 171.5 190.5 215.9 222.3 235.0 254.0 273.1 25. 330.2 355.6 36.3 31.0 393.7 412. 400.1 inch. 2.75 3.00 3.00 3.00 3.25 3.25 3.50 4.00 4.00 4.50 4.50 5.00 5.50 6.00 7.50 7.75.00.75 9.00 9.50 3.00 3.25 3.50 3.75 4.25 4.25 4.75 5.50 5.75 6.25 6.50 6.75 7.25.00 9.25 9.75 10.50 11.25 11.75 12.25 4.00 4.50 4.75 5.50 6.25 6.50 7.25.25.50 9.00 9.75 10.50 11.00 12.75 13.75 14.25 14.75 15.25 16.00 15.50 mm. 69.9 76.2 76.2 76.2 2.6 2.6.9 101.6 101.6 114.3 114.3 127.0 139.7 152.4 190.5 196.9.2 222.3 22.6 241.3 6.2 2.6.9 95.3 10.0 10.0 120.7 139.7 146.1 15. 165.1 171.5 14.2.2 235.0 247.7 266.7 25. 29.5 311.2 101.6 114.3 120.7 139.7 15. 165.1 14.2 209.6 215.9 22.6 247.7 266.7 279.4 323.9 349.3 362.0 374.7 37.4 406.4 393.7 inch. 3.25 3.50 3.50 3.50 3.75 4.00 4.25 4.50 4.75 5.25 5.25 5.75 6.25 6.75.25.50 9.00 9.75 10.00 10.50 3.50 4.00 4.25 4.50 4.75 4.75 5.50 6.25 6.75 7.00 7.50 7.75.00 9.00 10.25 10.75 11.50 12.25 12.75 13.25 4.25 4.75 5.00 5.75 6.50 6.75 7.50.50.75 9.25 10.00 10.75 11.25 13.00 14.00 14.50 15.00 15.00 16.25 15.75

www.jlx-valve.com TECHNICAL FEATURES 75 END FLANGE DIMENSIONS (Raised Face) CLASS 900, 1500 & 2500 CLASS 2500 CLASS 1500 CLASS 900 SIZE ID O C R B D Bolt L LM inch. 2 21/2 3 4 5 6 10 12 14 16 1 20 24 2 21/2 3 4 5 6 10 12 14 16 1 20 24 2 21/2 3 4 5 6 10 12 mm. 50 65 0 100 125 150 200 250 300 350 400 450 500 600 50 65 0 100 125 150 200 250 300 350 400 450 500 600 50 65 0 100 125 150 200 250 300 inch..50 9.62 9.50 11.50 13.75 15.00 1.50 21.50 24.00 25.25 27.75 31.00 33.75 41.00.50 9.62 10.50 12.25 14.75 15.50 19.00 23.00 26.50 29.50 32.50 36.00 3.75 46.00 9.25 10.50 12.00 14.00 16.50 19.00 21.75 26.50 30.00 mm. inch. 215.9 1.50 244.3 1.62 241.3 1.50 292.1 1.75 349.3 2.00 31.0 2.19 469.9 2.50 546.1 2.75 609.6 3.12 641.4 3.3 704.9 3.50 77.4 4.00 57.3 4.25 1041.4 5.50 215.9 1.50 244.3 1.62 266.7 1. 311.2 2..12 374.7 2. 393.7 3.25 42.6 3.62 54.2 4.25 673.1 4. 749.3 5.25 25.5 5.75.4 6.3 94.3 7.00 116.4.00 235.0 2.00 266.7 2.25 304. 2.62 355.6 3.00 419.1 3.62 42.6 4.25 552.5 5.00 673.1 6.50 762.0 7.25 mm. 3.1 41.1 3.1 44.5 50. 55.6 63.5 69.9 79.2 5.9.9 101.6 10.0 139.7 3.1 41.1 47. 53. 73.2 2.6 91.9 10.0 124.0 133.4 146.1 162.1 177..2 50. 57.2 66.5 76.2 91.9 10.0 127.0 165.1 14.2 mm. 3.62 4.12 5.00 6.19 7.31.50 10.62 12.75 15.00 16.25 1.50 21.00 23.00 27.25 3.62 4.12 5.00 6.19 7.31.50 10.62 12.75 15.00 16.25 1.50 21.00 23.00 27.25 3.62 4.12 5.00 6.19 7.31.50 10.62 12.75 15.00 inch. 91.9 104.6 127.0 157.2 15.7 215.9 269.7 323.9 31.0 412. 469.9 533.4 54.2 692.2 91.9 104.6 127.0 157.2 15.7 215.9 269.7 323.9 31.0 412. 469.9 533.4 54.2 692.2 91.9 104.6 127.0 157.2 15.7 215.9 269.7 323.9 31.0 inch. 6.50 7.50 7.50 9.25 11.00 12.50 15.50 1.50 21.00 22.00 24.25 27.00 29.50 35.50 6.50 7.50.00 9.50 11.50 12.50 15.50 19.00 22.50 25.00 27.75 30.50 32.75 39.00 6.75 7.75 9.00 10.75 12.75 14.50 17.25 21.25 24.3 mm. 165.1 190.5 190.5 235.0 279.4 317.5 393.7 469.9 533.4 55. 616.0 65. 749.3 901.7 165.1 190.5.2 241.3 292.1 317.5 393.7 42.6 571.5 635.0 704.9 774.7 31.9 990.6 171.5 196.9 22.6 273.1 323.9 36.3 43.2 539. 619.3 inch. mm. 1.00 25.4 1.12 2.4 1.00 25.4 1.25 31. 1.3 35.1 1.25 31. 1.50 3.1 1.50 3.1 1.50 3.1 1.62 41.1 1.75 44.5 2.00 50. 2.12 53. 2.62 66.5 1.00 25.4 1.12 2.4 1.25 31. 1.3 35.1 1.62 41.1 1.50 3.1 1.75 44.5 2.00 50. 2.12 53. 2.3 60.5 2.62 66.5 2. 73.2 3.12 79.2 3.62 91.9 1.12 2.4 1.25 31. 1.3 35.1 1.62 41.1 1. 47. 2.12 53. 2.12 53. 2.62 66.5 2. 73.2 QTY. 12 12 16 20 20 20 20 20 20 12 12 12 16 16 16 16 16 16 12 12 12 Diam. 7/ 1 7/ 1 1/b 11/4 11/ 13/ 13/ 13/ 11/2 15/ 17/ 2 21/2 7/ 1 11/ 11/4 11/2 13/ 15/ V/ 2 21/4 21/2 23/4 3 31/2 1 11/ II/4 II/2 13/4 2 2 21/2 23/4 inch. 5.75 6.25 5.75 6.75 7.50 7.50.75 9.25 10.00 10.75 11.25 12.75 13.75 17.25 5.75 6.25 7.00 7.75 9.75 10.25 11.50 13.25 14.75 16.00 17.50 19.50 21.25 24.25 7.00 7.75.75 10.00 11.75 13.50 15.00 19.25 21.25 mm. 146.1 15. 146.1 171.5 190.5 190.5 222.3 235.0 254.0 273.1 25. 323.9 349.3 43.2 146.1 15. 177. 196.9 247.7 260.4 292.1 336.6 374.7 406.4 444.5 495.3 539. 616.0 177. 196.9 222.3 254.0 29.5 342.9 31.0 49.0 539. inch. 5.50 6.00 5.50 6.50 7.25 7.25.50 9.00 9.75 10.50 11.00 12.50 13.50 17.00 5.50 6.00 6.75 7.50 9.50 10.00 11.25 13.00 14.50 15.75 17.25 19.25 21.00 24.00 6.75 7.50.50 9.75 11.50 13.25 14.75 19.00 21.00 mm. 139.7 152.4 139.7 165.1 14.2 14.2 215.9 22.6 247.7 266.7 279.4 317.5 342.9 431. 139.7 152.4 171.5 190.5 241.3 254.0 25. 330.2 36.3 400.1 43.2 49.0 533.4 609.6 171.5 190.5 215.9 247.7 292.1 336.6 374.7 42.6 533.4 FLANGE STANDARDS Acording to ASME B16.5 Acording to ASME B16.47 Serie A (MSS SP-44) a) Flange of 600 LB and 900 LB with the raised face of 0.25 (6.4 mm) is included in the smallest flange thickness C b) The lengin L of the double-end bolt don t include the terminal length c) Flange gasket of the matching flange ASME B.16.20

76 TECHNICAL FEATURES RING-JOINT FLANGED ENDS 1 2 4 5 6 7 9 10 11 12 13 14 15 16 17 ANSI Class-Lb Annular Groove K 150 300 600 900 1500 2500 P E F R 150Lb 300Lb/600Lb 900Lb 1500Lb 2500Lb No. NPS inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. 2 R22 3.250 2.55 0.250 6.35 0.344.74 0.03 0.76 4.00 101.60 2 2 R23 3.250 2.55 0.312 7.92 0.469 11.91 0.03 0.76 4.25 107.95 4.50 114.30 2 R24 3.750 95.25 0.312 7.92 0.469 11.91 0.03 0.76 4. 123.95 2 R26 4.000 101.60 0.312 7.92 0.469 11.91 0.03 0.76 5.00 127.00 5.25 133.35 21/2 R25 4.000 101.60 0.250 6.35 0.344.74 0.03 0.76 4.75 120.65 21/2 21/2 R26 4.000 101.60 0.312 7.92 0.469 11.91 0.03 0.76 5.00 127.00 5.25 133.35 21/2 R27 4.250 107.95 0.312 7.92 0.469 11.91 0.03 0.76 5.3 136.65 21/2 R2 4.375 111.13 0.375 9.53 0.531 13.49 0.03 0.76 5. 149.35 3 R29 4.500 114.30 0.250 6.35 0.344.74 0.03 0.76 5.25 133.35 3 3 3 R31 4.75 123.3 0.312 7.92 0.469 11.91 0.03 0.76 5.75 146.05 6.12 155.45 3 R32 5.000 127.00 0.375 9.53 0.531 13.49 0.06 1.52 6.62 16.15 4 R36 5.75 149.23 0.250 6.35 0.344.74 0.03 0.76 6.75 171.45 4 4 4 R37 5.75 149.23 0.312 7.92 0.469 11.91 0.03 0.76 6. 174.75 7.12 10.5 4 R3 6.1 157.1 0.43 11.13 0.656 16.66 0.06 1.52.00.20 4 R39 6.375 161.93 0.312 7.92 0.469 11.91 0.03 0.76 7.62 193.55 5 R40 6.750 171.45 0.250 6.35 0.344.74 0.03 0.76 7.62 193.55 5 5 5 R41 7.125 10.9 0.312 7.92 0.469 11.91 0.03 0.76.25 209.55.50 215.90 5 R42 7.500 190.50 0.500 12.70 0.71 19.4 0.06 1.52 9.50 241.30 5 R44 7.625 193.6 0.312 7.92 0.469 11.91 0.03 0.76 9.00 22.60 6 R43 7.625 193.6 0.250 6.35 0.344.74 0.03 0.76.62 21.95 6 6 6 R45.312 211.12 0.312 7.92 0.469 11.91 0.03 0.76 9.50 241.30 9.50 241.30 6 R46.312 211.12 0.375 9.53 0.531 13.49 0.06 1.52 9.75 247.65 6 R47 9.000 22.60 0.500 12.70 0.71 19.4 0.06 1.52 11.00 279.40 R4 9.750 247.65 0.250 6.35 0.344.74 0.03 0.76 10.75 273.05 R49 10.625 269. 0.312 7.92 0.469 11.91 0.03 0.76 11. 301.75 12.12 307.5 R50 10.625 269. 0.43 11.13 0.656 16.66 0.06 1.52 12.50 R51 11.000 279.40 0.562 14.27 0.906 23.01 0.06 1.52 13.3 339.5 a) Please to see Flange Ends for other connection dimension b) Flange metal ring gasket of the matching flange ASME B16.20 c) For the specification of NPS 2 ~ 2 1/2 of 900Lb will adopt the dimension of 1500Lb d) The length LRTJ of the double-end bolt don t include the terminal length

www.jlx-valve.com TECHNICAL FEATURES 77 RING-JOINT FLANGED ENDS 1 2 4 5 6 7 9 10 11 12 13 14 15 16 17 ANSI Class-Lb Annular Groove K 150 300 600 900 1500 2500 P E F R 150Lb 300Lb/600Lb 900Lb 1500Lb 2500Lb No. NPS inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. 10 R52 12.000 304.0 0.250 6.35 0.344.74 0.03 0.76 13.00 330.20 10 10 10 R53 12.750 323.5 0.312 7.92 0.469 11.91 0.03 0.76 14.00 355.60 14.25 361.95 10 R54 12.750 323.5 0.43 11.13 0.656 16.66 0.06 1.52 4.62 371.35 10 10 R55 13.500 342.90 0.6 17.4 1.1 30.1 0.09 2.29 16.75 425.45 12 R56 15.000 31.00 0.250 6.35 0.344.74 0.03 0.76 16.00 406.40 12 12 12 R57 15.000 31.00 0.312 7.92 0.469 11.91 0.03 0.76 16.25 412.75 16.50 419.10 12 R5 15.000 31.00 0.562 14.27 0.906 23.01 0.06 1.52 17.25 43.15 12 12 R60 16.000 406.40 0.6 17.4 1.312 33.32 0.09 2.29 19.50 495.30 14 R59 15.625 396. 0.250 6.35 0.344.74 0.03 0.76 16.75 425.45 14 14 R61 16.500 419.10 0.312 7.92 0.469 11.91 0.03 0.76 1.00 457.20 14 R62 16.500 419.10 0.43 11.13 0.656 16.66 0.06 1.52 1.3 466.5 14 R63 16.500 419.10 0.625 15. 1.062 26.97 0.09 2.29 19.25 4.95 16 R64 17.75 454.03 0.250 6.35 0.344.74 0.03 0.76 19.00 42.60 16 16 R65 1.500 469.90 0.312 7.92 0.469 11.91 0.03 0.76 20.00 50.00 16 R66 1.500 469.90 0.43 11.13 0.656 16.66 0.06 1.52 20.62 523.75 16 R67 1.500 469.90 0.6 17.4 1.1 30.1 0.09 2.29 21.50 546.10 1 R6 20.375 517.53 0.250 6.35 0.344.74 0.03 0.76 21.50 546.10 1 1 R69 21.000 533.40 0.312 7.92 0.469 11.91 0.03 0.76 22.62 574.55 1 R70 21.000 533.40 0.500 12.70 0.71 19.4 0.06 1.52 23.3 593.5 1 R71 21.000 533.40 0.6 17.4 1.1 30.1 0.09 2.29 24.12 612.65 20 R72 22.000 55.0 0.250 6.35 0.344.74 0.03 0.76 23.50 596.90 20 20 R73 23.000 54.20 0.375 9.53 0.531 13.49 0.06 1.52 25.00 635.00 20 R74 23.000 54.20 0.500 12.70 0.71 19.4 0.06 1.52 25.50 647.70 26.50 673.10 20 R75 23.000 54.20 0.6 17.4 1.312 33.32 0.09 2.29 24 R76 26.500 673.10 0.250 6.35 0.344.74 0.03 0.76 2.00 711.20 24 24 R77 27.250 692.15 0.43 11.13 0.656 16.66 0.06 1.52 29.50 749.30 24 R7 27.250 692.15 0.625 15. 1.062 26.97 0.09 2.29 30.3 771.65 24 R79 27.250 692.15 0.12 20.62 1.43 36.53 0.09 2.29 31.25 793.75 a) Please to see Flange Ends for other connection dimension b) Flange metal ring gasket of the matching flange ASME B16.20 c) For the specification of NPS 2 ~ 2 1/2 of 900Lb will adopt the dimension of 1500Lb d) The length LRTJ of the double-end bolt don t include the terminal length

7 TECHNICAL FEATURES RING-JOINT FLANGED ENDS 1 2 4 5 6 7 25 26 27 2 29 30 31 32 33 ANSI Class-Lb Annular Groove LRTJ 150 300 600 900 1500 2500 A B H C 150Lb 300Lb 600Lb 900Lb 1500Lb 2500Lb No. NPS inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. 2 R22 0.313 7.95 0.56 14.22 0.50 12.70 0.206 5.23 3.75 95.25 2 2 R23 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 4.00 101.60 4.25 107.95 2 R24 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 5.75 14.05 2 R26 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 7.00 177.0 21/2 R25 0.313 7.95 0.56 14.22 0.50 12.70 0.206 5.23 4.00 101.60 21/2 21/2 R26 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 4.50 114.30 4.75 120.65 7.00 177.0 21/2 R27 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 6.25 15.75 21/2 R2 0.500 12.70 0.56 14.22 0.69 17.53 0.341.66.00.20 3 R29 0.313 7.95 0.69 17.53 0.50 12.70 0.206 5.23 4.00 101.60 3 3 3 R31 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 4.75 120.65 5.00 127.00 5.75 146.05 3 R32 0.500 12.70 0.75 19.05 0.69 17.53 0.341.66 9.00 22.60 3 R35 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 7.00 177.0 4 R36 0.313 7.95 0.56 14.22 0.50 12.70 0.206 5.23 4.00 101.60 4 4 4 R37 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 5.00 127.00 5.75 146.05 6.75 171.45 4 R3 0.625 15. 0. 22.35 0.1 20.57 0.413 10.49 10.25 260.35 4 R39 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 7.75 196.5 5 R40 0.313 7.95 0.56 14.22 0.50 12.70 0.206 5.23 4.25 107.95 5 5 5 R41 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 5.25 133.35 6.50 165.10 7.50 190.50 5 R42 0.750 19.05 1.00 25.40 0.94 23. 0.45 12.32 12.25 311.15 5 R44 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 9.75 247.65 6 R43 0.313 7.95 0.56 14.22 0.50 12.70 0.206 5.23 4.50 114.30 6 6 6 R4S 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 5.50 139.70 6.75 171.45 7.75 196.5 6 R46 0.500 12.70 0.75 19.05 0.69 17.53 0.341.66 10.50 266.70 6 R47 0.750 19.05 1.00 25.40 0.94 23. 0.45 12.32 14.00 350.60 R4 0.313 7.95 0.56 14.22 0.50 12.70 0.206 5.23 4.75 120.65 R49 0.43 11.13 0.69 17.53 0.63 16.00 0.305 7.75 6.00 152.40 7.75 196.5.75 222.25 R50 0.625 15. 0. 22.35 0.1 20.57 0.413 10.49 12.75 323.5 R51 0.75 22.23 1.13 2.70 1.06 26.92 0.53 14.1 15.50 393.70 a) Please to see Flange Ends for other connection dimension b) Flange metal ring gasket of the matching flange ASME B16.20 c) For the specification of NPS 2 ~ 2 1/2 of 900Lb will adopt the dimension of 1500Lb d) The length LRTJ of the double-end bolt don t include the terminal length

www.jlx-valve.com TECHNICAL FEATURES 79 RING-JOINT FLANGED ENDS 1 2 4 5 6 7 25 26 27 2 29 30 31 32 33 ANSI Class-Lb Annular Groove LRTJ 150 300 600 900 1500 2500 A B H C 150Lb 300Lb 600Lb 900Lb 1500Lb 2500Lb No. NPS inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. inch. mm. 10 R52 0.313 7.95 0.56 14.22 0.50 12.70 0.206 5.23 5.00 127.00 10 10 10 R53 0.43 11.13 11.13 17.53 0.63 16.00 0.305 7.75 6.75 171.45.50 215.90 9.25 234.95 10 R54 0.625 15. 15. 22.35 0.1 20.57 0.413 10.49 13.50 10 R55 1.125 2.5 2.5 36.5 1.3 35.05 0.70 19.1 20.00 50.00 12 R56 0.313 7.95 7.95 14.22 0.50 12.70 0.206 5.23 5.25 133.35 12 12 12 R57 0.43 11.13 11.13 17.53 0.63 16.00 0.305 7.75 7.25 14.15.75 222.25 10.00 254.00 12 R5 0.75 22.23 22.23 2.70 1.06 26.92 0.53 14.1 15.25 37.35 12 R60 1.250 31.75 31.75 39.62 1.50 3.10 0.79 22.33 22.00 55.0 14 R59 0.313 7.95 7.95 14.22 0.50 12.70 0.206 5.23 5.75 146.05 14 14 R61 0.43 11.13 11.13 17.53 0.63 16.00 0.305 7.75 7.50 190.50 9.25 234.95 14 R62 0.625 15. 15. 22.35 0.1 20.57 0.413 10.49 11.00 279.40 14 R63 1.000 25.40 25.40 33.27 1.25 31.75 0.61 17.30 16.75 425.45 16 R64 0.313 7.95 7.95 14.22 0.50 12.70 0.205 5.21 5.75 146.05 16 16 R65 0.43 11.13 11.13 17.53 0.63 16.00 0.305 7.75.00.20 10.00 254.00 16 R66 0.625 15. 15. 22.35 0.1 20.57 0.413 10.49 11.50 292.10 16 R67 1.125 2.5 2.5 36.5 1.3 35.05 0.70 19.1 1.50 469.90 1 R6 0.313 7.95 7.95 14.22 0.50 12.70 0.2506 5.23 6.25 15.75 1 1 R69 0.43 11.13 11.13 17.53 0.63 16.00 0.305 7.75.25 209.55 10.75 273.05 1 R70 0.750 19.05 19.05 25.40 0.94 23. 0.45 12.32 13.25 336.55 1 R71 1.125 2.5 2.5 36.5 1.3 35.05 0.70 19.1 20.75 527.05 20 R72 0.313 7.95 7.95 14.22 0.50 12.70 0. 5.23 6.75 171.45 20 20 R73 0.500 12.70 12.70 19.05 0.69 17.53 0.341.66.75 222.25 11.50 292.10 20 R74 0.750 19.05 19.05 25.40 0.94 23. 0.45 12.32 14.25 361.95 20 R75 1.250 31.75 31.75 39.62 1.50 3.10 0.79 22.33 22.25 565.15 24 R76 0.313 7.95 7.95 14.22 0.50 12.70 0.206 5.23 7.25 14.15 24 24 R77 0.625 15. 15. 22.35 0.1 20.57 0.413 10.49 10.00 254.00 13.25 336.55 24 R7 1.000 25.40 25.40 33.27 1.25 31.75 0.61 17.30 1.00 457.20 24 R79 1.375 34.93 34.93 44.45 1.63 41.40 0.977 24.2 25.50 647.70 a) Please to see Flange Ends for other connection dimension b) Flange metal ring gasket of the matching flange ASME B16.20 c) For the specification of NPS 2 ~ 2 1/2 of 900Lb will adopt the dimension of 1500Lb d) The length LRTJ of the double-end bolt don t include the terminal length