COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES
SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and a load check valve on every working section H Available with parallel, tandem or series circuit. H Optional carry--over port. H A wide variety of port and circuit valves. H Available manual, pneumatic, hydraulic, electro--hydraulic, and remote with flexible cables spool control kits. H Diameter mm (.79 in) interchangeable spools. Working conditions his catalogue shows technical specifications and diagrams measured with mineraloil of46 mm /s -- 46 cst viscosity at 4 C temperature. Nominal flow rating 9 l/min Operating pressure (maximum) parallel or tandem circuit 35 bar 46 psi series circuit bar 35 psi Back pressure (maximum) on outlet port 5 bar 36 psi Internal leakage A(B) p= bar - 45 psi fluid and valve at 4 C 3cm 3 /min.8 in 3 /min Fluid Mineral base oil Fluid temperature with NBR (BUNA -N) seals from -- to 8 C with FM (VION) seals from -- to C Viscosity operating range from 5 to 75 mm /s from 5 to 75 cst min. mm /s cst max. 4 mm /s 4 cst Max level of contamination 9/6 -- ISO 446 Ambient temperature from --4 to 6 C NOE - For different conditions please contact Sales Dept. Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information or special request. WARNING! All specifications of this catalogue refer to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice. WALVOIL IS NO RESONSIBLE FOR ANY DAMAGE CAUSED BY AN INCORREC USE OF HE RODUC. 7 th edition November : his edition supersedes all prior documents. DBC3E
SDS5 Dimensional data 5. 58 max.6 45 5.7 38.5 68.5.68 Optional top outlet (must be used in carry -over configuration) 38..5 37.46 5.97 35.5.4 45.77 F E 45.77 35.5.4 Valve type 38.5 5. WALVOIL 439 MADE IN IALY 36 45 9.4.77.35 7.5 9.8 3.54 Carry -over C optional 67.5.66 M M8 68 6.6.39.43 roduction batch : = production year () = progressive number 43.5.7 4.5 4.5 WALVOIL 439 MADE IN IALY MADE IN IAKY 4.76 os. 6 6 os. YE E F Weight E F Weight YE mm in mm in kg lb mm in mm in kg lb SDS5/ 54 6.6 7.8 4. SDS5/7 44 6.7 34 3.4 4.7 89.7 SDS5/ 99 7.83 6 4.57 6 35.3 SDS5/8 469 8.5 386 5. 45.7 SDS5/3 44 9.6 6 6.34.9 46. SDS5/9 54. 43 7. 5.6 SDS5/4 89.4 6 8. 5.9 57. SDS5/ 559. 476 8.7 55.6 3 SDS5/5 334 3. 5 9.88 3.8 67.9 SDS5/ 64 3.8 5.5 6.5 33 SDS5/6 379 4.9 96.7 35.8 78.9 SDS5/ 649 5.6 566.3 65.5 44 Standard threads ORS BS (ISO 8/) UN -UNF (ISO 96 -) Inlet and carry--over C G3/4 /6--UN--B(SAE) A and B ports G/ 7/8--4 UNF--B (SAE ) Outlet G3/4 /6--UN--B(SAE) ILO ORS Hydraulic G/4 9/6--8 UNF--B (SAE 6) neumatic NF /8--7 NF /8--7 DBC3E 3
SDS5 erformance data (pressure drop vs. flow) Open centre From side inlet to side outlet. A A 4 (bar) 3 sections 54 (psi) B B ressure drop 8 sections 4 sections section 36 8 3 6 9 Flow (l/min) Inlet to work port From side inlet to A port (spool in position ) orb port (spool in position ). A A 4 (bar) 3 54 (psi) B B ressure drop A (B ) A (B ) 36 8 3 6 9 Flow (l/min) Work port to outlet From A port (spool in position ) orb port (spool in position ) to side outlet. A A 4 (bar) 3 54 (psi) B B ressure drop A (B ) A (B ) 36 8 3 6 9 Flow (l/min) NOE -- Measured with spool type. 4 DBC3E
SDS5 Hydraulic circuit parallel working sections A B A B 5 8 Ex.: SDS5//AC(XG--5)/8L/8L/RC Intermediate pressure compensated flow divider section A B A B 5 8 Ex.: SDS5//AC(XG--5)/8L/DFG/8L/RC inlet cover and mid return manifold section A B B A 5 8 5 8 Ex.: SDS5//AC(XG--5)/8L/CS/8L/BC(XG--5) DBC3E 5
SDS5 Hydraulic circuit Inlet cover YE CODE DESCRIION AC(XG) 646 Side inlet with pilot operated pressure relief valve AD(XG) 6464 op inlet with pilot operated pressure relief valve AC(YG3) 646 Side inlet with direct pressure relief valve AC(SV) 6463 Side inlet with relief valve blanking plug 5 8 5 8 5 8 AC(XG--5) AD(XG--5) AC(YG3--5) AC(SV) Working sections YE CODE DESCRIION -8L 646 arallel Q -8L 645 arallel without valve prearangement S -8L 647 Series S -8L 648 andem A B A B A B A B --8L Q--8L S--8L S--8L 6 DBC3E
SDS5 Hydraulic circuit Intermediate sections YE CODE DESCRIION CS 644 Mid return manifold section DFG 6446 ressure compensated flow divider section EI(XG) 645 Secondary pilot operated pressure relief valve EI(XG) 6455 Mid inlet with secondary pilot operated pressure relief valve 5 8 5 8 CS DFG EI(XG--5) EI(XG--5) Outlet cover YE CODE DESCRIION RC 6436 Side outlet RD 64365 op outlet RE 6436 op outlet with carry -over RK 64364 op outlet with closed centre C RC RD RE RK NOE -- Codes are referred to BS thread. DBC3E 7
SDS5 Assembling parts. M nut - wrench 6. AR CODE DESCRIION. 5IR49 ie rod kit for section valve 5IR94 ie rod kit for sections valve 5IR39 ie rod kit for 3 sections valve 5IR84 ie rod kit for 4 sections valve 5IR39 ie rod kit for 5 sections valve 5IR374 ie rod kit for 6 sections valve 5IR49 ie rod kit for 7 sections valve 5IR465 ie rod kit for 8 sections valve 5IR59 ie rod kit for 9 sections valve 5IR555 ie rod kit for sections valve 5IR599 ie rod kit for sections valve 5IR644 ie rod kit for sections valve ie rod tightening torque 4 Nm (9.6 lbft). 5SA59 Brakets kit 8 DBC3E
SDS5 Inlet cover options Description example: FE SDS5 / A C (XG - 5) EL -VDC *.. 3. 4. ressure relief valve setting in bar 4.. SV F 3. X L. Y EL SV. Inlet cover body * CODE DESCRIION 3FIA4 AC -AD type body. Inlet port options * CODE DESCRIION 3XA73 G 3/4 plug (n. plug required) 4. Inlet valves options YE CODE DESCRIION F 3XCAR4 Inlet anti -cavitation valve L XCAR43 Hydraulic pilot unloader valve (FC.5) EL YCAR435 VDC electromagnetic controlled unloader valve YCAR43 4 VDC electromagnetic controlled unloader valve SV XA5634 Relief valve blanking plug - 3. Inlet relief options YE CODE DESCRIION VM/ pilot operated pressure relief valve type X (standard) (XG -5) X6 Range 5 to 35 bar / 36 to 46 psi standard setting 5 bar / 8 psi VMD/ direct pressure relief valve type Y (YG -5) 3XCAR Range 8 to 6 bar / 6 to 3 psi standard setting 5 bar / 8 psi (YG3-75) 3XCAR3 Range 5 to 5 bar / 8 to 36 psi standard setting 75 bar / 5 psi (YG4 -) 3XCAR4 Range to 35 bar / 9 to 46 psi standard setting bar / 3 psi Standard setting is referred to l/min flow. SV XA5634 Relief valve blanking plug NOE (*) -- Items are referred to BS thread. DBC3E 9
SDS5 Working section options Description example: EL SDS5 / - 8 L. (G3 - ) * mounted on A port. mounted on B port. 3 mounted on A and B ports... 3. 4. 5. ort relief valve setting in bar 3.. Working section kits * YE CODE DESCRIION Q 5EL3 arallel without valve prearrangement 5EL3 arallel S 5EL3 Series S 5EL33 andem Include boby, seals, rings and load check valve.. Spool options YE CODE CIRCUI DESCRIION 3CU4 Double acting, 3 positions, with A and B closed in neutral position CS 3CU4 Double acting, 3 positions, with A and B closed in neutral position, metering type A 3CU4 Double acting, 3 positions, with A open to tank in neutral position B 3CU43 Double acting, 3 positions, with B open to tank in neutral position 3CU45 Double acting, 3 positions, with A and B open to tank in neutral position 3 3CU438 Single acting on A, 3 positions, B plugged; requires G/ plug (see part I) 4 3CU435 Single acting on B, 3 positions, A plugged; requires G/ plug (see part I) 8 9B -B -B 8C I. 3. A side spool positioners YE CODE DESCRIION 8 5V8 With spring return in neutral position 9B 5V9 With detent in position and spring return in neutral position B 5V9 With detent in position and spring return in neutral position 5V With detent in position, neutral and B 5V With detent in position and, spring return in neutral position 8C 5V879 roportional pneumatic kit 8EI3 5V835 VDC ON/OFF electro -hydraulic kit 5V835 4 VDC ON/OFF electro -hydraulic kit 8EI3 NOE (*) -- Items are referred to BS thread. DBC3E
SDS5 Working section options 5. U C 3. 4. L SL Q II 4. B side options YE CODE DESCRIION L 5LEV Standard lever SL 5CO Without lever, with dust proof plate Q 5EL CD cable connection 5EL5 CG cable connection LCB 5CLO Mechanical joystick 5. ort relief options YE CODE DESCRIION Anti -shock valve (G -63) 5KI Range 4 to 8 bar / from 58 to 5 psi standard setting 63 bar / 9 psi (G3 -) 5KI3 Range 63 to bar / from 9 to 9 psi standard setting bar / 45 psi (G4 -) 5KI4 Range 6 to 35 bar / from 3 to 46 psi standard setting bar / 9 psi Anti -shock and anti -cavitation valve U(G -63) 5KI3 Range 63 to 5 bar / from 9 to 8 psi standard setting 63 bar / 9 psi U(G3 -) 5KI33 Range to 5 bar / from 45 to 36 psi standard setting bar / 45 psi U(G4 -) 5KI34 Range to 35 bar / from 9 to 46 psi standard setting bar / 9 psi Standard setting is referred to l/min flow. C 5KI4 Anti -cavitation 3 5A583 A and B ports valve blanking plugs I ort plug * YE CODE DESCRIION G/ 3XA778 lug for single acting spool II Optional handlevers LCB YE CODE DESCRIION AL/Mx 7 For L lever box L= mm/7.87in AL8/Mx5 735 For LCB joystick L= 5mm/9.84in II For special configurations see page 3 DBC3E
SDS5 Spools options A B A B A B A B A B A 3 B 4 B port plugged A port plugged A side spool positioners N/8-7 V V 5. 64.5.54 Operating features Adjustment range : from to 5.5 bar from 4.5 to 79.8 psi diagram 5A Max.pilot pressure : bar / 45 psi 8.5 4.39 V V 8C roportional pneumatic kit 5 6 Optional connector code: X Connection ISO44 76.99 69 6.65 L V Operating features Nominal voltage : VDC / 4 VDC ower rating.. : W Duty cycle... : % ilot pressure. : from to 5 bar from 45 to 75 psi 9B B Feeder kit (see page 3) 67 6.57 B V L 8EI3 ON/OFF electro--hydraulic kit DBC3E
SDS5 Electro -hydraulic feeder kit. 4.. 3. AR YE CODE DESCRIION. KER3 5KER343 kit for section KER3 5KER343 kit for sections KE3R3 5KE3R343 kit for 3 sections KE4R3 5KE4R343 kit for 4 sections KE5R3 5KE5R343 kit for 5 sections KE6R3 5KE6R343 kit for 6 sections. VRE 3XGIU635 G 3/4 back -pressure valve (carry -over configuration) 3. 4RON475 G 3/4 washer 4. RE 4A38 M8X.5 plug NOE -- Codes are referred to BS thread. Special configurations Hydraulic spool control Operating features Adjustment range : from 5.8 to 9 bar / 84 to 76 psi - diagram 4 Max.pilot pressure : bar / 45 psi A Working section kit: code 5EL3B (standard section) B 5.5.3 8IM VA G/4 VB VA VB Ex.: EL SDS5/--IM 8IM Spools: IM code 3CU44 IM code 3CU454 Hydraulic spool control: code 5IDR6 63.48 7.67 Floating circuit Working section kit: code 5EL3 (special section 5) 3 A B Ex.: EL SDS5/--5 3... 53 4 th position spool in floating A Spool: code 3CU44 Spool positioner: code 5V3 89 3.5 DBC3E 3
SDS5 Outlet cover options Description example: FS SDS5 / RC *. 3. RE -RK option 4. 5.. Outlet section parts AR CODE QY DESCRIION. 3FIA3 Outlet section body *. 3XA73 G 3/4 plug * 4. 4GUA78 4 7.7x.78 NBR 7 SH O -Ring seal 5. 4GUA8.95x.78 NBR 7 SH O -Ring seal Circuit option AR CODE QY DESCRIION 3. 4A38 M8x.5 plug for carry -over (RE) and closed centre (RK) configuration NOE (*) -- Items are referred to BS thread. 4 DBC3E
SDS5 Installation and maintenance he SDS5 valve is assembled and tested as per the technical specification of this catalogue. Before the final installation on your equipment, follow the below recommendations: -- the valve can be assembled in any position, in order to prevent working sections deformation and spools sticking mount the product on a flat surface; -- in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly on the valve; -- prior to painting, ensure plastic port plugs are tightly in place. A A B B C Carry -over configuration Fitting tightening torque - Nm / lbft HREAD YE and C ports A and B ports port BS (ISO 8/) G3/4 G/ G3/4 With O--Ring seal 7 / 5.6 5 / 36.9 7 / 5.6 With copper washer 7 / 5.6 6 / 44.3 7 / 5.6 With steel and rubber washer 7 / 5.6 6 / 44.3 7 / 5.6 UN--UNF (ISO 96--) /6--UN--B(SAE) 7/8--4 UNF--B (SAE ) /6--UN--B(SAE) With O--Ring seal 95 / 7 6 / 44.3 95 / 7 NOE -- hese torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and surface finish. he manufacturer shall be consulted. DBC3E 5
WALVOIL S..A. 4 REGGIO EMILIA IALY VIA ADIGE, 3/D EL. +39.5.934 FAX +39.5.3984 E -MAIL: INFO@WALVOIL.COM H: //WWW.WALVOIL.COM SALES DEARMEN EL. +39.5.93555 FAX +39.5.93455 DBC3E