29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator 4X Ø 5.2 95.2 ± 0.1 (.210 (3.75) ±.005) 12.62 (.50) 80.9 (3.19) 131.7 (5.18) 29.6 17.3 (.68) 119 (4.7) Panel Preparation 18.2 (.72) Pull-to-open Paddle 170 (6.7) 95.2 (3.75) 12.62 (.50) 6.4 93.7 (3.69) 131.7 (5.18) 18.2 (.72) Maximum Door Thickness - 8 (.32) 170 (6.7) 6.4 93.7 (3.69) 52 (2.05) 52 (2.05) Single or multi-point actuation capability Compatible with a wide range of rotary latches Environmentally sealed Housing: Glass-filled nylon, black Paddle: Zinc alloy, black powder coated or chrome plated Installation Notes Maximum tightening torque on supplied mounting nuts 3 N m (27 in lbf) Notes For lock core selection and a complete overview of the SOUTHCO Key-Choice System see page 158 Can be configured with 1 or 2 cables, see page 272. Recommended cable type 7 263B PP Paddle Finish 30 Chrome, polished 50 Black powder coated See table L Locking Options 1 Reversible Key (No Keys - R001) 2 Reversible Key (2 Keys included - R001) 3 Reversible Key (Keyed differently - 2 keys included) 4 Standard Key (No keys - CH751) 5 Standard Key (2 Keys included - CH751) 6 Standard Key (Keyed differently - 2 keys included) 9 No Lock Plug installed (See notes for more information) AC - 20-3 L 1 - PP - KC KC Key Codes (Omit for Locking Options 1, 2, 4, 5 and 9) *KD10 Keyed Differently (Only used if L =3 or 6) *MK10 Master Keyed Differently (Only used if L =6) * Supplied in multiples of 10 with 10 different key codes.
263C R3-22 Multi Point Actuator Pull-to-open Paddle Single or multi-point actuation capability Compatible with a wide range of rotary latches Environmentally sealed 128.7 (5.07) Front flange 71 (2.8) Cable retaining clips included Latch assembly: Zinc alloy, black or white powder coated or chrome plated. Mounting bracket: Steel, zinc plated 116 (4.57) Front flange 110 () 68.5 (2.7) Installation Notes Maximum tightening torque on mounting screws: 2 N m (14 in lbf) Notes For lock core selection and a complete overview of the SOUTHCO Key-Choice System see page 158 Multi-point cables (not supplied) 102 (4) Mounting screws (4x) see table below (sold separately) Panel Preparation Mounting bracket R3-23-161-11 (sold separately) 2X 16.5 (.65) Can be configured with 1 or 2 cables. Recommended cable type 7. Cable mounting brackets sold separately. (See page 275). 85 (3.35) 100 (3.94) 9 (.35) 118 (4.65) Backside panel Order latch, bracket and mounting screws separately For latch see table For mounting bracket, order part number R3-23-161-11 See table for mounting screws Mounting bracket (sold separately) Frontside panel of door 1.5-9.5 (.0625-.375) L Locking Options 0 Non-locking 1 Reversible Key (No keys - R001) 2 Reversible Key (2 keys included - R001) 4 Standard Key (No keys - CH751) 5 Standard Key (2 Keys included - CH751) 9 No lock plug installed (see notes for more information) 118 (4.65) Backside panel 100 (3.94) 118 (4.65) R3-22 - 3 L 0 - F 0 32-50 (1.26-2.00) Backside panel of door F Finish 1 Polished chrome 5 Black powder coated 7 White powder coated Screws for Mounting Bracket R3-23-161-11 Front Door Thickness No. 8 Self Tapping Screw (order 4 per latch) 1.5 (.062) - 4.8 (.187) R3-23-250-01 4.8 (.187) - 9.5 (.375) R3-23-250-02
AC-10 Actuator 264 218 (8.6) 65 (2.5) Large handle Flush mount Rear mount installation Flush mounting style Single, multi-point or direct pull actuation capability Multiple key code options Non-Locking option Direct Pull Recommended to use with Trigger Pull Trigger Pull 43.5 (1.71) 21.5 (.85) Multi-Point Without Cable Bracket 48.9 (1.93) Housing, handle, rotating linkage: glass-filled reinforced nylon, black 16 (1.) (.6) 211.3 (8.32) Housing and handle gaskets: adhesive backed foam, black Mounting nut (M6 x 1) not supplied. Installation torque of mounting nuts not to exceed 7 N m (62 in-lbf) Notes 35 (1.4) Multi-Point With Cable Bracket 131.1 (5.16) Recommended to use with Cables: see AC Cable drawing J-AC-C for cable selection. Panel Preparation 152.4 ±0.3 (6 ±.01) 12X R4 (.16) ACTUAL SIZE AC-10 can only use snub end coupling (Type 6 or 7 cable). 120 (4 3X Ø 7 (.3) Recommended to use with Rods M6 x 20 (4) Threaded stud and cable bracket retainers: steel, zinc nickel Installation Notes R4-0-51292 4X Ø7 ±0.1 72 101 (2.84) (3.98) 86 ±0.3 (3.39 ±.012) 23.1 (.91) 137.4 (5.41) 32.2 (1.27) Selection Notes: For use with Rods / Cables, recommended Snap-in Retainer for Rotator Plate: Southco Part Number R4-0-43922. See Trade Drawing J-R4-0-43922 for more details and options. For lock core selection, detailed key information and a complete overview of the SOUTHCO KeyChoice System see PK Lock Cores section. S 1 2 3 Actuation Style L 0 1 2 3 4 5 6 9 Locking Options Single Point, Direct Pull Multi-Point, without Cable Bracket Multi-Point, with Cable Bracket AC - 10 - S L 1-11 - KC Non-Locking Reversible key (No keys - R001) Reversible key (2 keys included - R001) Reversible key (keyed differently - 2 keys included) Standard key (No keys - CH751) Standard key (2 keys included - CH751) Standard key (keyed differently - 2 keys included) No Lock Plug installed (See notes for more information) For unique key code options, please contact customer service. KC Key Codes (Omit for Locking Options 0, 1, 2, 4, 5 and 9) *KD10 Keyed Differently (Only used if L =3 or 6) *MK10 Master Keyed Differently (Only used if L =6) * Supplied in multiples of 10 with 10 different key codes. 1 (
AC-15 Actuator 265 Large Handle Surface Mount 84 (3.3) 84 (3.3) 55 (2.2) 55 (2.2) 120 (4.7) 218 (8.6) 120 (4.7) 218 (8.6) 65 (2.5) 65 (2.5) Housing, handle, linkage: glass-filled reinforced nylon, black (1.3) (1.3) Rear mount installation Surface mounting style Direct pull actuation Multiple key code options Non-locking option Threaded inserts: brass, natural Housing and handle gaskets: adhesive backed foam, black Trigger Pull Installation Notes Trigger Pull Panel Preparation R4-0-51292 Actuator is recommended to use with Trigger Pull 38.1 (1.50) 38.1 (1.50) 29.8 (1.17) (1.17) 120 (4.7) 3X Ø 7 (.3) 120 (4.7) 3X Ø 7 (.3) Mounting hardware (M6 x 1) not supplied. Recommended screw length=panel thickness + 10.0 (.39) Installation torque of mounting nuts not 29.8to exceed 7 N m (62 in-lbf) 2.9 (.11) 2.9 (.11) 16 (1.) (.6) 16 (1.) (.6) 35 (1.4) 35 (1.4) 105 (4.1) 105 (4.1) Selection Notes: AC - 15-1 L 1-11 - KC L 0 1 2 3 4 5 6 9 Locking Options Non-Locking Reversible key (No keys - R001) Reversible key (2 keys included - R001) Reversible key (keyed differently - 2 keys included) Standard key (No keys - CH751) Standard key (2 keys included - CH751) Standard key (keyed differently - 2 keys included) No Lock Plug installed (See notes for more information) KC Key Codes (Omit for Locking Options 0, 1, 2, 4, 5 and 9) *KD10 Keyed Differently (Only used if L =3 or 6) *MK10 Master Keyed Differently (Only used if L =6) * Supplied in multiples of 10 with 10 different key codes. For lock core selection, detailed key information and a complete overview of the SOUTHCO KeyChoice System see PK Lock Cores section. For unique key code options, please contact Southco.
266 AC-30 Multi Point Actuator Push-Button Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Single hole install Button: Nylon Housing: Zinc or Stainless steel Lock Plug: Zinc Cam, Washer, Rivet: Stainless steel, passivated With cam attachment shown 28 (1.10) 64 (2.52) Without cam attachment shown 2 X Ø5 ±0.1 (.197 ±.004) Spacer not required if panel thickness > 10.3 (.41) Panel Thickness from 1 to 22 (.04 to.87) Max Push Travel 12 (.47) 10 (.39) Cam/ Cable Travel Ø 38.3 (1.51) 51.4 (2.02) Tab washer Mounting nut Cable holder Ø4.1 (.16) 2 (.08) ACTUAL SIZE 28 (1.10) Push Down 12 (.47) 42 (1.65) + 0.2 +.008 Ø 32.4 (1.27 ) - 0-0 Panel preparation + 0.2 +.008 29.2 (1.15 ) Selection - 0-0 E End Style 1 With Cam attached 3 Without Cam attachment H Housing Material 1 Zinc alloy with black powder coat 3 Stainless steel with black powder coat AC - 30 - E L M - H B - KC B Button Material 1 Nylon, black L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) K Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 With spacer mounting (must have if glass panel) 2 Without spacer mounting
AC-40 Multi Point Actuator Push-Button Handle 267 With cam attachment shown Spacer not required if panel thickness > 4.6 (.18) (1.) 181.4 (7.14) 47 (1.85) (1.) Single or multi-point actuation capability Accommodates wide panel thickness Multiple key code options Easy Grip Panel Thickness from 1 to 16.8 (.04 to.66) Max. Without cam attachment shown 43 (1.) 2 X Ø5 ±0.1 (.197 ±.004) 58 (2.28) 51.4 (2.02) Cam/Cable Travel 10 (.39) Ø 4.1 (.16) 142 ±1 (5.59 ±.02) Button: Nylon Housing: Zinc Alloy or Stainless steel Lock plug: Zinc Alloy Cam, Washer, Rivet: Stainless steel, passivated Ø44 (1.73) 36 (1.42) 12 (.47) Push Down M8 X 1.25 (.05) thread 18 deep (Max mounting torque: 40 (1.57) N M) + 0.2 Ø 32.4-0 +.008 (1.27 ) -0 142 ±1 (5.59 ±.02) 8.4 ±0.1 (.33 ±.004) 13 ±0.2 (.510±.008) E End Style 1 With Cam attached 3 Without Cam attachment H Handle Material 1 Black GF nylon with zinc housing insert 2 Black GF nylon with stainless steel housing insert Selection AC - 40 - E L M - H B - KC B Button Material 1 Nylon, black L Locking Option 1 Reversible key (No keys - R001) 2 Reversible key (2 keys included - R001) 3 Reversible key (Multiple key codes - 2 keys included) 4 Standard key (No keys - CH751) 5 Standard key (2 keys included - CH751) 6 Standard key (Multiple key codes - 2 keys included) K Key Codes (Omit for locking options 1,2,4 and 5) KD10 Keyed differently (10 codes) MK10 Master keyed, keyed differently M Mounting Method 1 Cable parallel (or no cable), with spacer mounting (must have if glass panel) 2 Cable parallel (or no cable), without spacer mounting 3 Cable cross with spacer mounting (must have if glass panel) 4 Cable cross without spacer mounting
268 AC Single Point Actuator T-handle Surface mount installation Generous grip area Pull to activate Cable clip 20.8 (.82) 21.7 (.85) 23 (.91) Housing: PC/ABS, black T-handle and slide: Glass-filled nylon, black Clip: Acetal, black Spring: Stainless steel, passivated See table 56 (2.20) 40±0.2 (1.57±.008) 45 (1.77) Housing 25±0.2 (.98±.008) 4 x Ø 4.5±0.1 (.18±.004) (For thru hole mounting) 104.5 (4.11) 117 Open (4.61) T-handle 60 (2.36) Pull direction AC-60-101-11 AC Single Point Actuator Plastic paddle and housing Front mount installation Flush Two cable mounting options Paddle and housing: Glass-filled nylon, black Spring: Stainless steel, passivated 5.7 28.7 (.22) (1.13) 53.7 (2.11) 108.3 (4.26) Panel 91.6±0.3 (3.61±.012) 80±0.3 4 x R5 (.2) Maximum (3.15±.012) 2 x Ø 4.5±0.1 (.177±.004) (For thru hole mounting) 42±0.5 (1.65±.02) 21±0.2 (.83±.008) 5.8±0.1 (.23±.004) 38.3 (1.51) Panel thickness See table Cable placement 2 Cable placement 1 AC-70-101-11 Cable Orientation Panel Thickness Cable Travel Placement 1 12.5 (.49) maximum 11.1 (.44) Placement 2 16 (.63) maximum 13.2 (.52)
AC Single Point Actuator Push-button 269 6 (.24) 64.6 (2.54) Knob Ø 26 (1.02) Ø 38 (1.50) Mounting nut Housing Door panel 26 (1.02) Maximum panel thickness +1 Ø 32-0 +.04 (1.26 ) -0 30±0.2 (1.18±.008) Double-D hole preparation Flush Mounting hardware included Push button and housing: PC/ABS, black Cam: Glass-filled nylon, black Spring: Stainless steel, passivated Cam 13.7 (.54) Cable travel See table ACTUAL SIZE AC-80-101-11 AC Single Point Actuator Aluminum paddle and housing 73 (2.87) 4X R5 Max 2X Ø 4.5 ±0.1 (.177±.004) (For thru hole mounting) 18.9 (0.74) 38.9 (1.53) Front mount installation Three cable mounting options Low profile Robust material Cable Placement 1 Cable Placement 2 96.2 (3.78) Cable Placement 3 13 (0.51) 35.9 (1.41) 30.3 (1.2) 81 (3.2) AC-75-101-11 4 ±0.1 (0.15 ±0.003) Cable Orientation Panel Thickness Cable Travel Placement 1 12.5 (.49) max. 11.1 (.44) Placement 2 16 (.63) max. 13.2 (.52) Placement 3 16 (.63) max. 13.2 (.52) Paddle and housing: Aluminum, black powder coated Notes AC-75 can only use snub end coupling (Type 6 or 7 cable). See table www.southco.com/r4
270 AC-50 Single Point Actuator Squeeze handle Single actuation capability Accomodates tubular construction or rounded mounting surfaces Squeeze Handle 169.2 28.2 13 Handle travel Housing, handle: Glass-filled nylon, black Installation Notes Installation torque of screws not to exceed 2 N m maximum (Countersunk screws or rivets recommended) Pull Direction 12 Cable travel Retaining clip included 4.5 44 R 13.4 20 Use Southco cable end fitting type B (L type) (Cable sold separately. Refer to Southco drawing J-AC-C for Cable Selection Guide.) AC-50-101-11 Panel Preparation (.8) 15.2 6.7 21.7 2X M5 Thread 18 129.5 141.4 Squeeze handle assembly Customer installation tube
AC Single Point Actuators Stainless Steel M1 Style Actuator 271 38mm (1.5 ) Shown actual size 50mm (2 ) Shown actual size Ø 44 (1.73) Ø 61 (2.41) Locking handle shown (also available as non-locking) Actuator Assembly (38mm (1.5) shown) Single, round-hole installation Locking style restricts access Premium finish and corrosion resistance Latch: 316 grade stainless steel, bright polished Spacer: Nylon, black Contact Southco for other finishes Performance Details Max. static load: 545 N (122 lbf) Accessories - 38mm (1.5 ) Spacer: M1-510-96-1 Mounting screws: M1-510-96-4 One key supplied per latch for additional keys order M7-88-9121324-S 38mm (1.5) Ø38.1 ±0.5 (1.50 ±.02) + 1.2 +.015 50mm (2) Ø50 (2.00 ) - 0 Mounting Bracket Phillips Recess Pan Head Mounting Screws (included) -.031 Cable mounting bracket (Sold separately) See page 275 (1/8 Mounting screws not included) Retainer Clip (Sold separately) R4-0-43922-2 (1.) Door Thickness Door Accessories - 50mm (2 ) For lock style 4 Key (pair) Part number: M1-546 For lock style 7 Overmolded key S008 (pair) Part number: M1-525-39-S008 Size Actuator Assembly Door Thickness Cable Mounting Bracket 38mm (1.5) 50mm (2) Locking (2 keys supplied) Non-Locking Locking (2 keys supplied) Non-Locking AC-M1-15-41-8 AC-M1-15-61-8 9 mm R4-0-50253-1 12 mm R4-0-50253-2 9 mm R4-0-50253-1 12 mm R4-0-50253-2 AC-M1-42-8 9 mm R4-0-50253-1 AC-M1-43-8 12 mm R4-0-50253-2 AC-M1-62-8 9 mm R4-0-50253-1 AC-M1-63-8 12 mm R4-0-50253-2 Cable Travel 13 (.5) Cable Mounting Bracket Cables Constructed from marine grade stainless materials, the cable is suitable for multiple bends and can be further customized upon request. Key-Locking keyed alike S008 AC-M1-72-8 9 mm R4-0-50253-1 AC-M1-73-8 12 mm R4-0-50253-2 38mm (1.5) 2.5 (.10) 50mm (2) 3 (.12)
271A 64 Push-to-Close Actuator Pull-to-open Paddle handle actuator Multi-point Large Flush mounting installation Multiple mounting styles Locking and Non-Locking options 139.7 (5.50) 29 (1.14) Latched 25 (1.0) Unlatched Stainless steel, polished, steel, zinc plated or black powder coated Accessories Flat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01 108 (4.25) Available with or without lock (see part number selection) 4 x Ø H rivet mounting only 47 (1.85) Unlatched 70 (2.75) Latched 1.2 (.05) 23 (.91) 40.9 (1.61) Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05 Ø 2.3 (.09) Ø 3 (.13) 12 (.45) 118 (4.65) 95.2 (3.75) Notes AC Cable end fitting must be eyelet for this actuator (Page 272) (2 PL) For use with AC Cables, must use eyelet fitting. Use cotter pin to secure end fitting. 96.8 (3.81) 86 (3.38) 4 x R 5 (.20) Maximum Door H 4 x Ø Rivet mounting only Selection H Housing 0 Weld 1 Rivet through hole 4.9 (.19) 2 Rivet through hole 5.2 (.20) 64-40 - 4 L H - M M Material 10 Steel, zinc plated 20 Stainless steel, polished 50 Steel, black powder coated www.southco.com/64 L Lock style 0 Non-locking 1 Key-locking keyed alike CH751 (2 Flat keys supplied)
AC Cable Splitter 271B 110 (1) 54.2 (2.15) 97 (3.82) 4.5 (.18) dia x 3 15 (.59) 30 (1.18) Allows one actuation point for two rotary latches or two actuation points for one rotary latch Adjustable to fine tune timing of actuation points Cable splitter and cables sold separately Housing: Black Polypropylene Slider: Black Glass-filled nylon See page 272 and 273 for cable end fitting and cable type ø 4.5 (.18) optional locking screw point - use PT K60 screw not supplied 23.4 (.92) 115 (4.53) Cables shown for illustration only - to be ordered separately Packaged Delivery Condition After customer assembly Clips detached from slider and installed to secure cables. PULL One actuation point for two rotary latches Two actuation points for one rotary latch Latches Latch Actuator PULL Actuators PULL PULL AC-05-301-11
AC Cables Cable Accessories 275 Retainer Clip C E Ø B D For use with Ø 4 (.157) rod or Southco cable assembly Clip: Acetal Latch Series Trigger / Lever Type Part Number R4-05 Bottom R4-0-60784 Beige Color B C D E 5.9 (.23) 3.5 (.13) 16.4 (.65) 2.8 (.11) Trigger / Lever Hole Diameter 6.4 Trigger / Lever Thickness 3 (.12) Bracket: Steel See table Perpendicular In-line Two Point R4-0-43922 R4-0-43922-3 Black Red 5.9 (.23) 2.5 (.10) 14.4 (.57) 2 (.08) R4-10 Bottom / Top R4-0-43922-2 Black Dual Trigger 5.9 (.23) R4-0-43922 Black 5.9 R4-0-43922-3 Red (.23) R4-0-43922-2 Black 5.9 (.23) 4.5 (.18) 2.5 (.10) 4.5 (.18) 16.4 (.65) 14.4 (.57) 16.4 (.65) 4 (.16) 2 (.08) 4 (.16) R4-30 Perpendicular Two Point R4-0-43922 Black 5.9 R4-0-43922-3 Red (.23) Bottom R4-0-43922-2 Black 5.9 (.23) 2.5 (.10) 4.5 (.18) 14.4 (.57) 16.4 (.65) 2 (.08) 4 (.16) R4-20 Bottom R4-50 Perpendicular R4-0-43922-1 White 4.5 (.18) 16.4 (.65) 6.7 (.26) 4 (.16) Cable Mounting Bracket 1.9 (.07) 28.1 (1.11) A R4-0-50253-1 31 (1.22) A R4-0-50253-2 28 (1.10) R4-0-50253-3 19 (.75) Actuator Assembly Mounting Bracket Retainer Clip Mounting Screws Cable Mounting Bracket (1/8 Mounting screws not included) www.southco.com/c3