Part-number Description

Similar documents
Part-number Description

Lamp type D Dot E Ring. Operation. Operation type. mode Z Latching type X Selector type Y Key-lock type TS Emergency stop. No letter means momentary

Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss

总目录 GQ 系列金属信号灯 按钮开关 GQ 系列高强度微行程按钮开关 LAS2GQ 系列金属按钮开关 LAS1 系列 BGQ 型金属按钮开关 IP67. Ф19,22mm IP40,67. Ф16mm IP65,67. Ф19mm IP40,65,67.

Farbe LED Color LED. Anschlusstyp Terminal Type. J: Lötanschluss ohne Buchstaben: Schraubklemmenanschluss

Miniature Stainless Steel Vandal Resistant

Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview

AV series Anti-vandal and security pushbutton switches

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.

Momentary pushbutton switches - round plunger

AV SERIES PUSHBUTTON SWITCHES Distinctive features

RoHS. Specifications. Part Number Configurator

Sealed pushbutton switches - bushing Ø 16 mm - momentary

SWITCHES. Other switch types include conventional, push-button and toggle switches.

Series. Robust and attractive.

Parsic Italia Contatti Oper. Type. Led Lamp Type

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

CIT SWITCHTM ANT SPECIFICATIONS

Miniature Switches & Pilot Devices

ELECTRICAL SPECIFICATIONS

Bright illumination face and snap-action switching.

Anti vandal switch.

18mm bezel diameter 16mm panel hole S.P. Push to make Polished finish 2A, 48V d.c.

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.

UP Series Miniature Pilot Lights

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary

Selection guide - Section B1 «I» range

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67

ø8 A8 Series Miniature Control Units

Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.

Distinctive Characteristics

8000 series Momentary or alternate action pushbutton switches

IP series Latching action pushbutton switches for harsh environments

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29

XA Series Emergency Stop Switches (w/removable Contact Block)

1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break

IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

ø10 A1 Series Miniature Control Units

18000 series Snap-action momentary pushbutton switches

We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories

LUMOTAST FK. General data. Content

Pushbutton and key switches

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel

Common features. Installation options. Aesthetic options

XW Series Emergency Stop Switches

ø12 A2 Series Miniature Control Units

Pilot Devices, Compact Range

Distinctive Characteristics

RU Series Universal Relays

Switches. Introduction

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS

13000 series Professional quick-break momentary pushbutton switches

AP/UP Series Miniature Pilot Lights UZ Series Miniature Buzzer

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator

General Specifications

Rocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance

Pushbutton Switches Sub-Miniature

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

HMI Components. Series. LED-Indicator. Machinery and Automation Panel building Laboratory and measuring equipment. Raised design

Distinctive Characteristics

Switches. Introduction

Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range

HMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch

General_technical_data Series

Lighted PushButton Switch

3 CE-Conformity. General information. Signal lamps. 3-2 Signal lamps

General_technical_data Series

Thermal Overcurrent Circuit Breaker 3130

Distinctive Characteristics

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

General Specifications

Contact blocks and lamp blocks with holder for front mounting Max. number of blocks Included in holder blocks Catalog No. Ref.

EXCEL CELL ELECTRONIC CO., LTD. NO. A S P E C I F I C A T I O N Edition 2 Page 1

CONTROL UNITS. Features. Specifications

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

Correction Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.

AM1 (NZ BASIC) SWITCHES

Oiltight Switches & Pilot Devices

Signaling Lights LD6A. LD6A LED SignaLight Towers Assembled Products. Unique Striped Design Improves Visibility

Distinctive Characteristics

ACME SCREW LINEAR ACTUATOR. OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor

Distinctive Characteristics

502 VALVE WITH UM ELECTRIC ACTUATOR

22mm XW E-Stops. UL File #E68961 CCC No Specifications

LED Annunciator Lights. KFE-HD Series

Series PD directly operated solenoid valves

VALVES WITH UM ELECTRIC ACTUATOR

VALVES WITH UV ELECTRIC ACTUATOR

55 Series - Miniature General Purpose Relays 5-10 A

C & S 22 mm NON-ILLUMINATED PUSHBUTTONS METAL BEZEL

ø22mm HW Series Control Units Control Units

Thermal-Magnetic Circuit Breaker M1-...

CONTENTS PRODUCT DESCRIPTION Functional Description: NO Switch Functional Description: Illumination...

502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:

YB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons

Transcription:

Part-number Description GQ16 Code of series The Front shape B Domed F Flat Round H High Round PF Super Flat Head + Flat PH Super Flat Head + High Flat Contact structure 10 1NO 01 1NC 1NC can be made to order for some products No letter means signal lamp Lamp type D Dot E Ring Connet type J Pin terminal L Long Pin Terminnal No letter means screw terminal Lamp color and colorized button R Red G Green Y Yellow O Orange B Blue W White N Black Lamp voltage AC/DC 6V AC/DC 12V AC/DC 24V AC/DC 36V Note: Other voltage can be made to order Crust material N Nickel-plated Brass S Stainless steel A PC Engineering plastic Cr Chrome-plated (made to order) Note: Pls read the catalogue carefully, and choose the right part-number according to the sign. Specifications Standard and Certification Operating Temperature Operating Humidity Contact Insulation Dielectric Strength Vibration Shock Solder Heat -25 ~+55 (no freezing) keep the air flowing around illuminated pushbutton 45~85%RH(no condensation) 50mΩ 1000MΩ 2000V,A C50Hz,5 seconds 50Hz,Amplitude mm >10g 320 (or 30W soldering iron) no more than 2 seconds) Standard EN61058-1:2002+A2:2008 EN60947-1:2004 Certification Mark Certificate Authority /Certification Number VOV/VT11018807 CTS/CTS070706-01006-E Operation Type Sign Diagram X Note: Using two terminals, double-break and slow-motion contact Y type NC switch can be made to order for individual product, pls check the product description. Y Lamp Ratings Voltage Current DroppingWay Lamp Circuit Diagram LED lamp(ac/dc) 40000 hours(reference) AC/DC6V,AC/DC12V,AC/DC24V,AC/DC36V About 15mA External resistance Using AC/DCLED lamp, the terminals have no difference of anode and cathode. R a b Note: DC LED and other voltage can be made to order. www.onpow.com 06

Nickel plated Brass(N)/ 1.5 The Front Shape: High Round Nickel plated Brass(N)/ The Front Shape: Domed Nickel plated Brass(N)/ Contact Configuration: 1NO Nickel plated Brass(N)/ 1.5 17.5 Contact Configuration: 1NO The Front Shape: High Round Nickel plated Brass(N)/ 17.5 Contact Configuration: 1NO The Front Shape: Domed Nickel plated Brass(N)/ 1.5 17.5 GQ16F-10/ GQ16H-10/ GQ16B-10/ Nickel plated Brass / GQ16F-10/J/ GQ16H-10/J/ GQ16B-10/J/ Nickel plated Brass / Type Screw Type Pin (2 0.5mm) 07 www.onpow.com

Nickel plated Brass(N) 1.5 The Front Shape: High Round Nickel plated Brass(N) Nickel plated Brass(N) 1.5 17.5 The Front Shape: High Round Nickel plated Brass(N) 17.5 GQ16 super flat anti-vandal metal push button installation method Φ18 +. Φ18. 2-01 0 cut out diameter GQ16PF-10/ GQ16PH-10/ Stainless steel Nickel plated Brass GQ16PF-10/J/ GQ16PH-10/J/ Nickel plated Brass Nickel plated Brass Type Screw Type Pin (2 0.5mm) Swi tching 5~14Nm www.onpow.com 08

For signal lamp,part number is:gq16f-d/j/ / / 1.5 20 For signal lamp,part number is:gq16h-d/j/ / / 20 For signal lamp,part number is:gq16b-d/j/ / / 20 For signal lamp,part number is:gq16f-e/j/ / / 1.5 20 For signal lamp,part number is:gq16h-e/j/ / / 20 For signal lamp,part number is:gq16b-e/j/ / / 2.8 20 0.6 Type GQ16F-10D/J/ / / GQ16H-10D/ J/ / / GQ16B-10D/ J/ / / Pin (2 0.5mm) x(double-break slow-motion GQ16F-10E/J/ / / GQ16H-10E/ J/ / / GQ16B-10E/J/ / / VoltageUe CurrentIe Current- Limiting Configuration Tble Operating Voltage(U) Current -Limiting (R) dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 270Ω,1/4W 220Ω,1/4W 15mA 40000 hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V 09 www.onpow.com

For signal lamp,part number is:gq16f-d/jl/ / / 1.5 25.5 For signal lamp,part number is:gq16h-d/jl/ / / 25.5 For signal lamp,part number is:gq16b-d/jl/ / / 25.5 For signal lamp,part number is:gq16f-e/jl/ / / 1.5 25.5 For signal lamp,part number is:gq16h-e/jl/ / / 25.5 For signal lamp,part number is:gq16b-e/jl/ / / 2.8 25.5 0.6 Type GQ16F-10D/JL/ / / GQ16H-10D/JL/ / / GQ16B-10D/JL/ / / Pin (2 0.5mm) x(double-break slow-motion GQ16F-10E/JL/ / / GQ16H-10E/JL/ / / GQ16B-10E/JL/ / / VoltageUe CurrentIe Operating Voltage(U) Current -Limiting (R) 270Ω,1/4W www.onpow.com 10 Current- Limiting Configuration Tble dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 220Ω,1/4W 15mA 40000 hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V

If you need indicator, The model number is:gq16pf-d/j/ / / LED Color( ) : 1.5 20 If you need indicator, The model number is:gq16ph-d/j/ / / 3 20 If you need indicator, The model number is:gq16pf-e/j/ / / 1.5 20 If you need indicator, The model number is:gq16ph-e/j/ / / 3.3 20 GQ16 super flat type install way: Φ18 +. Φ18. 2-01 0 Hole diameter Type GQ16PF-10D/J/ / / GQ16PH-10D/J/ / / 11 Pin (2 0.5mm) x(double-break slow-motion GQ16PF-10E/J/ / / GQ16PH-10E/J/ / / StainlessSteel/Aluminiumalloy StainlessSteel/Aluminiumalloy VoltageUe CurrentIe Current- Limiting Configuration Tble Operating Voltage(U) Current -Limiting (R) dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 270Ω,1/4W 220Ω,1/4W 15mA 40000 hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V www.onpow.com

If you need indicator, The model number is:gq16pf-d/jl/ / / 1.5 25.5 If you need indicator, The model number is:gq16ph-d/jl/ / / 3 25.5 If you need indicator, The model number is:gq16pf-e/jl/ / / GQ16F-10E/ JL/ / / 1.5 25.5 If you need indicator, The model number is:gq16ph-e/jl/ / / 3 25.5 GQ16 super flat type install way: Φ18 Φ 18. 2 + - 01 0. Hole diameter Type GQ16PF-10D/JL/ / / GQ16PH-10D/JL/ / / 06. m www.onpow.com Pin (2 0.5mm) x(double-break slow-motion GQ16PF-10E/JL/ / / GQ16PH-10E/JL/ / / StainlessSteel/Aluminiumalloy StainlessSteel/Aluminiumalloy VoltageUe CurrentIe Current- Limiting Configuration Tble Operating Voltage(U) Current -Limiting (R) dot illuminated/ring illuminated(led) AC/DC 1.8V 6V 270Ω,1/4W 220Ω,1/4W 15mA 40000 hours 12V 820Ω,1/2W 680Ω,1/2W AC/DC 2.8V 24V 36V 12

15.4 1 Contact Configuration: 1NO (1NC can be made to order) The Front Shape: Domed The Crust Material( ):UV protection PC IP Degree: IP65,IK02 15.4 1 Contact Configuration: 1NO (1NC can be made to order) The Crust Material( ):UV protection PC IP Degree: IP65,IK02 1.5 Contact Configuration: 1NO (1NC can be made to order) The Front Shape: High Flat Round The Crust Material( ):UV protection PC IP Degree: IP65,IK02 15.4 1 Contact Configuration: 1NO : 1~3mm The Crust Material( ):Brass(Bronze-coloured) IP Degree: IP40,IK09 3 Max. 1 21Max. BottomView GQ16B-10/PC Stainless steel Brass(Bronze-coloured) GQ16F-10/PC UV protection PC GQ16M-10 Brass(Bronze-coloured) GQ16H-10/PC Type Screw Type Screw About 8N About 3mm 1mm 1~3mm 13 www.onpow.com