SPEIFITION FETURES HOUSING: FRME: LENS: 20 gauge formed cold rolled steel housing with continuous seam welds. luminum and stainless steel options available. Inset and overlapping doorframe available in aluminum, cold rolled steel, and stainless steel. Extruded inset door available in anodized aluminum or white painted aluminum. Frame held to housing via aircraft cable. crylic lens with optional RFI and symmetric/asymmetric pattern, smooth side out. Inset (cold rolled steel, stainless steel and.050 alum) and Overlapping frame uses a rail hold down system. LE: vailable in three color temperatures 3500 K, 4000 K and 5000 K. Other color temperatures available, consult factory. 0-10V dimming available with 10-100% range and 1-100% range. Must specify dimming under options. FSTENERS: Stainless steel Philips flat head screws with captive cage nuts. Finish to match housing. FINISH: GSKET: www.newstarlighting.com White antimicrobial powder coat finish following multistage iron phosphate pre-treatment. losed cell EPM and closed cell silicone gaskets prevent air contaminations from entering the fixture. ORERING INFORMTION Ex: SSR22-H/IS-L4401--UN Project: Type: Product: STRSURGIL 22-24 LE PROUT NOMINL SIZE FMILY MOUNTING (imensional ata Pg. 2) HOUSING SS PPLITION: Operating Rooms, Examination Rooms, Isolation Suites, Laboratories, and more. MOUNTING: Surface (S) or Recessed (R) installation. Recessed mounting accommodates Grid and Flange installations. Recessed fixtures will be supplied with adjustable swing arms that can be used for Flange applications or taped to the side for Grid applications. Recessed install compatible with 1-1/2 and 15/16 Grid systems. Mounting for custom ceilings available, consult factory. LEL: Fixture is certified to UL standards. ertified IP65, ISO4, and NSF. ISO 4 IP65 FRME Inset (I) or Overlap (O) LUMEN OUTPUT (Performance ata Pg. 3) LMP TYPE S = Surface R = Recessed Housing (Grid/Flange installation) 22 = 2x2 24 = 2x4 H = 20Ga. RS (standard) HS = 20Ga. SS (rushed) HP = 20Ga. SS H =.050Ga. lum. IRUITS LENS VOLTGE OPTIONS IE=Extruded lum. L2 = Low IP=Extruded lum. L4 = Standard (Painted) L6 = Medium IP65: L8 = High I=20Ga.RS I=.050 lum. (Painted) I=20Ga.S.S. (rushed) IS=20Ga.S.S. (Painted) O=18Ga.RS (Standard) OS=18Ga.S.S (rushed) OP=18Ga.S.S. (Painted) O=.050 lum. (Painted) KEY 35 = 3500 K 40 = 4000 K 50 = 5000 K 1 = 1 ircuit 2 = 2 ircuits FZ = Fuse* M = 0-10V dimming with 10-100% range M1 = 0-10V dimming with 1-100% range S2 = Step im. Module (50-100%) S3 = Step im. Module (25-50-100%) IP66 = IP66 rating (only with Overlapping Frame) MS = MIL-ST-461F =.125 Prismatic crylic E=.125 White Frost. Poly. R=.125 Symmetric Pris. crylic with RFI Grid S=.150 Symm. symmetric Pris. crylic with RFI Grid 12 = 120V 27 = 277V 34 = 347V UN = Universal FY = Yoke racket for Recessed mount (Replaces swing arm system) EL1 = Emerg. at. LE Low (1100-1250 lm) EL2 = Emerg. at. LE High (2200-2500 lm) RF = (RIF) Radio Interference Filter* TH = Torx Head screws (with center pin) TM = Tandem Mount+ (120V-277V) FZ* M M1 S2 S3 IP66 MS Not IP65 90 = 90 RI For additional options and dimensional details please consult your New Star Lighting Representative. Page 1/3 FY EL1 EL2 RF* TH TM+ 90 Subject to change * annot use with UN voltage + Requires joiner bracket. Supplied with fixture.
STRSURGIL 22-24 LE IMENSIONL T SURFE MOUNTING (S) REESSE MOUNTING (R): GRI & FLNGE 3.096" MX. 2.313" SS22: 4x Ø.31" HOLE SS24: 6x Ø.31" HOLE.875" KO (4).250 " HOLES FOR EILING WIRE TTHMENT INSET FRME LUMINUM EXTRUE INSET FRME OVERLPPING FRME I FRME ETIL IE FRME ETIL O FRME ETIL 2.31" SSS22 24.00" 3.94" 24.07" 1.38" SSS24 24.00" 3.94" 48.07" SSR22 23.69" 4.00" 23.69" SSR24 23.69" 4.00" 47.69".94" SSR (W/ O FRME) REESSE GRI SSR (W/ O FRME) REESSE FLNGE REOMMENE EILING UT OUTS: SSR22: 22.88" X 22.88" SSR24: 22.88" X 46.88" GRI OMPTIILITY: Spaced at 24 x 48 enters 1-1/2" 1-1/2" 15/16" For additional options and dimensional details please consult your New Star Lighting Representative. Page 2/3 1-1/2"
STRSURGIL 22-24 LE PERFORMNE T MOEL OUTPUT LMP TYPE LUMENS ELIVERE EFFIY (lm/w) INPUT POWER (W) 3500 K 3000 120 25 Low 4000 K 3125 125 25 5000 K 3250 130 25 3500 K 6000 120 50 Standard 4000 K 6250 125 50 SS22 5000 K 6500 130 50 3500 K 8625 115 75 Medium 4000 K 9000 120 75 5000 K 9375 125 75 3500 K 11500 115 100 High 4000 K 12000 120 100 5000 K 12500 125 100 3500 K 6000 120 50 Low 4000 K 6250 125 50 5000 K 6500 130 50 3500 K 12000 120 100 Standard 4000 K 12500 125 100 SS24 5000 K 13000 130 100 3500 K 17250 115 150 Medium 4000 K 18000 120 150 5000 K 18750 125 150 3500 K 23000 115 200 High 4000 K 24000 120 200 5000 K 25000 125 200 isplayed information is with a.125 Prismatic Polycarbonate. Subject to change without notice. Visit www.newstarlighting.com for additional information and IES files. Performance ata subject to change without notice. For additional options and dimensional details please consult your New Star Lighting Representative. Page 3/3
www.newstarlighting.com SPEIFITION FETURES HOUSING: FRME: LENS: Project: Type: Product: STRSURGIL 22-24 FLUORESENT SSS22/SSS24/SSG22/SSG24/SSF22/SSF24 20 gauge formed cold rolled steel housing with continuous seam welds. luminum and stainless steel options available. Inset and overlapping doorframe available in aluminum, cold rolled steel, and stainless steel. Extruded inset door available in anodized aluminum or white painted aluminum. Frame held to housing via aircraft cable. crylic lens with optional RFI and symmetric/asymmetric pattern, smooth side out. Inset (cold rolled steel, stainless steel and.050 alum) and Overlapping frame uses a rail hold down system. ELETRONIS: Electronic instant start ballast <10% TH standard. Lamps by others. FSTENERS: FINISH: GSKET: Stainless steel Philips flat head screws with captive cage nuts. Finish to match housing. White antimicrobial powder coat finish following multistage iron phosphate pre-treatment. losed cell EPM and closed cell silicone gaskets prevent air contaminations from entering the fixture. PPLITION: Surgical Suites, Operating Rooms, Examination Rooms, Isolation Suites, Laboratories, and more. MOUNTING: Surface, Grid or Flange mounting. Flange fixtures come with adjustable 90 swing arm for easy installation. Optional Yoke racket would replace swing arm. Grid fixtures compatible with 1-1/2 and 15/16 Grid systems. Mounting for custom ceilings available, consult factory. LEL: Fixture is certified to UL standards. ertified IP65, ISO4, and NSF. ORERING INFORMTION Ex: SSG24-HS/I-3322--UN PROUT NOMINL SIZE FMILY MOUNTING (imensional ata Pg. 2) HOUSING SS LMP TYPE S = Surface G = Grid F = Flange 22 = 2x2 24 = 2x4 H = 20Ga. RS (standard) HS = 20Ga. SS (rushed) HP = 20Ga. SS H =.050Ga. lum. FRME Inset (I) or Overlap (O) IE=Extruded lum. IP=Extruded lum. (Painted) IP65: I=20Ga.RS I=.050 lum. (Painted) I=20Ga.S.S. (rushed) IS=20Ga.S.S. (Painted) O=18Ga.RS (Standard) OS=18Ga.S.S (rushed) OP=18Ga.S.S. (Painted) O=.050 lum. (Painted) IRUITS LENS VOLTGE OPTIONS ISO 4 IP65 # OF LMPS 2 = 2 Lamps 3 = 3 Lamps 4 = 4 Lamps 6 = 6 Lamps 2x2: 14 = Lin. 14W T5 17 = Lin. 17W T8 24 = Lin. 24W T5 HO 2x4: 28 = Lin. 28W T5 32 = Lin. 32W T8 54 = Lin. 54W T5 HO KEY 1 = 1 ircuit 2 = 2 ircuits E1 = Emerg. attery Pack (450 Lumens)* E2 = Emerg. attery Pack (1100 Lumens)* RF = RIF (Radio Interference Filter)* TH = Torx Head screws (with center pin) FY = Yoke racket for Flange mount (Replace swing arm system) If circuit is not specified at time of quote or order, fixture will have single circuit. =.125 Prismatic crylic 12 = 120V E=.125 White Frost. Poly. 27 = 277V R=.125 Symmetric Pris. 34 = 347V crylic with RFI Grid UN = Universal S=.150 Symm. symmetric (120V-277V) Pris. crylic with RFI Grid IP66 = IP66 rating (only with Overlapping Frame) TM = Tandem Mount+ = imming allast* PR = Program Rapid Start FZ = Fuse* MS = MIL-ST-461F E1* E2* RF* TH FY IP66 TM+ * PR FZ* MS Not IP65 * annot use with UN voltage + Requires joiner bracket. Supplied with fixture. onsult factory for lamp-ballast options onsult factory for T5 availability Page 1/2 V12122017
IMENSIONL T STRSURGIL 22-24 FLUORESENT SSS22/SSS24/SSG22/SSG24/SSF22/SSF24 SURFE MOUNTING GRI MOUNTING FLNGE MOUNTING REMOVLE OVER; GSKETE TO HOUSING WITH (2) 0.875 I. K.O. S 0.875 I. K.O..85 0.88 I. K.O. WTER-TIGHT HU PROVIE (4).4375 I. THRU HOLES OVERLPPING FRME LUMINUM EXTRUE INSET FRME OVERLPPING FRME LUMINUM EXTRUE INSET FRME OVERLPPING OOR LUMINUM EXTRUE INSET OOR Recommended eiling ut-out SSS22 24" 3.94" 24.07" 24" N/ SSS24 24" 3.94" 48.07 24" N/ SSG22 23.69" 3.94" 24.07" 23.69" N/ SSG24 23.69" 3.94" 48.07 23.69 N/ SSF22 25.13" 3.94" 25.25" 25.13" 24.375" x 24.375" SSF24 25.13" 3.94" 49.13" 25.13" 48.375" x 24.375" (SSG) GRI OMPTIILITY: Spaced at 24 x 48 enters 1-1/2" 1-1/2" 15/16" 1-1/2" For additional options and dimensional details please consult your New Star Lighting Representative. Page 2/2 V12122017