Presses
Hydraulic shop presses WPP 15 T - Hydraulic table shop press with manual pump and mobile piston for professional use For all repair and assembly works, e.g.: Straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the stamping machine table Reliable particularly precise hydraulic made in Pressure generation manual by actuating the pump lever With automatic return of the piston With chrome-plated cylinder piston Pressure power readable on the manometer With overload protection valve Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperativela use optional perforated plates WPP 15 T! To machine flats, to press in bearings, bolts or similar materials imperatively use the optional perforated plate for WPP 15 T,. 410 2. Type WPP 15 T : 1115 plus VAT 699.00 Power Max. load prism jaw Weight 15 t 3.5 t 105 kg 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm Dimensions 1350 690 500 550 550 Accessories 6-piece pressure mandrel kit with perforated plate for WPP 15 T 410 1115 Perforated plate for WPP 15 T 410 5 plus VAT 129.00 67.90 140 Built according to CE directives
Presses WPP - Hydraulic column shop presses with with mobile piston and manual pump for professional use For all repair and assembly works, e.g.: Straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the stamping machine table Reliable particularly precise hydraulic made in With firm chrome-plated cylinder piston Pressure power readable on the manometer With automatic return of the piston With overload protection valve Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 30 additionally equipped with hoist to lift and lower the workbench Accessories retrofitting kit foot pedal for pump WPP 15 Fig. with optional foot pedal WPP 30 Equipped with a winch to lift and lower the workbench! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. Type WPP 15 WPP 20 WPP 30 : 1015 1020 1030 plus VAT 729.00 829.00 1'579.00 Power 15 t 20 t 30 t Max. load prism jaw 3,5 t 5 t 7,5 t Weight 120 kg 140 kg 230 kg Transportation packaging flat rate* TPFR 1=19.00 TPFR 1=19.00 TPFR 1=19.00 *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. Dimensions in mm WPP 15 WPP 20 WPP 30 Accessories 1890 620 600 500 1000 1 770 600 610 1000 950 1980 890 600 710 1000 1 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm 6-piece pressure mandrel kit with perforated plate for WPP 15 410 1115 for WPP 20 410 1020 for WPP 30 410 1030 Perforated plate for WPP 15 and WPP 20 410 5 Perforated plate for WPP 30 410 6 Retrofitting kit foot pedal for pump without assembly for WPP 15 and WPP 20 410 1021 plus VAT 129.00 129.00 179.00 67.90 139.00 85.00 Built according to CE directives 141
Hydraulic shop presses WPP BK - Medium-weight hydraulic column shop presses with mobile piston, with manual and foot pump for professional use For all repair and assembly works, e.g.: straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the table Reliable particularly precise hydraulic made in Pressure build-up by actuating the pump lever manually or by foot Due to foot-controlled hydraulic pump both hands are free in order to fix the workpiece With mobile chrome-plated cylinder piston Pressure power readable on the manometer With automatic return of the piston With overload protection valve Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 20 BK! To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates. WPP 50 BK Equipped with a winch to lift and lower the workbench Type WPP 20 BK WPP 30 BK WPP 50 BK : 2020 2030 2050 plus VAT 1'049.00 1'939.00 2'199.00 Power 20 t 30 t 50 t Max. load prism jaw 5 t 7.5 t 12,5 t Weight 210 kg 280 kg 360 kg Transportation packaging flat rate* TPFR 2=39.00 TPFR 2=39.00 TPFR 2=39.00 *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. Dimensions WPP 20 BK WPP 30 BK WPP 50 BK 1 870 650 690 180 950 1010 1920 990 650 790 200 1030 1240 2000 990 650 790 210 1000 1' 142 Accessories 6-piece pressure mandrel kit with perforated plate for WPP 20 BK 410 2020 for WPP 30 BK 410 2030 for WPP 50 BK 410 2050 Perforated plate for WPP 20 BK 410 2 Perforated plate for WPP 30 BK 410 3 Perforated plate for WPP 50 BK 410 4 6-piece pressure mandrel kit with perforated plate, Ø 29, 24, 18, 14, 10, 5 mm plus VAT 129.00 179.00 215.00 67.90 139.00 169.00 Built according to CE directives
Presses WPP 50 M - Hydraulic column shop presses with electrical pump and double-acting cylinder for professional use For all repair and assembly works, e.g.: straightening of axes, carriers, shafts, etc.; pressing and pressing in of bearings, bolts and bushings; pressing and squeezing works; load tests and welding tests and more Solid welding construction Robust frame with perforation to adjust the pressing table Pressure power readable on the manometer With automatic switch-over of increased no-load operation speed to little working speed of the piston With double-acting cylinder Reliable particularly precise hydraulic made in With overload protection valve With a winch to lift and lower the workbench Pressure power readable on the manometer Equipped with doubleacting cylinder Including 2-piece prism kit to insert round material To machine flats, to press in bearings, bolts or similar materials imperatively use optional perforated plates WPP 50 M Type WPP 50 M : 3050 plus VAT 3'789.00 Power 50 t Max. load prism jaw 12.5 t Slow feed 1.7 mm/sec. Rapid feed 20 mm/sec. Motor power 1.5 kw Power connection 50 Hz V Weight 420 kg Transportation packaging flat rate* TPFR 2=39.00 *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. Optional 6-piece pressure mandrel kit Ø 29, 24, 18, 14, 10, 5 mm Accessories plus VAT 6-piece pressure mandrel kit with perforated plate for WPP 50 M 410 2050 215.00 Perforated plate for WPP 50 M 410 4 169.00 Dimensions F - Height passage min. I - Width of the pump WPP 50 M 2290 985 650 790 210 65 1050 250 1350 350 Built according to CE directives 143
Hydraulic shop presses WPP MVZ - Heavy-type, hydraulic professional shop presses equipped with mobile piston and two piston feed rate Perfect for technical shops, repair shops and technical training facilities with two piston feed speeds and pressure regulation: the piston first rapidly moves towards the workpiece and then switches over to press speed The hydraulic system is working quite precisely in the electrical mode as well as in the manual mode The height of the heavy working table can be easily adjusted without effort by means of the hydraulic cylinder Appropriate for assembly and straightening works as well as for workpiece inspections or to press in or press out bearings and other components with motor-driven piston return Very robustly built - the stable frame is welded from best profile steel with utmost carefulness Chromed, tempered piston with bottom which can be unscrewed Including pressure manometer WPP 100 MVZ WPP 60 MVZ Type WPP 60 MVZ WPP 100 MVZ WPP 100 MVZ D 0 WPP MVZ WPP MVZ D 0 : 401 1060 401 1100 401 1101 401 0 401 1 plus VAT 5'239.00 6'489.00 8'059.00 9'259.00 10'699.00 Power 60 t 100 t 100 t t t Feed speed 9.2 mm/s 9.2 mm/s 9.2 mm/s 8.9 mm/s 8.9 mm/s Motor power 1.5 kw 2.2 kw 2.2 kw 3.0 kw 3.0 kw Power connection 50 Hz V V V V V Weight 685 kg 955 kg 1240 kg 1575 kg 2045 kg Transportation packaging flat rate* TPFR 4=79.00 TPFR 6=200.00 TPFR 6=200.00 TPFR 6=200.00 TPFR 6=200.00 *For any explanation of the transport surcharge please refer to the rear side, Price TVP plus VAT. 144 Built according to CE directives
Presses WPP MVZ Accessories plus VAT Prism block kit* for WPP60MVZ 410 0060 399.00 Prism block kit* for WPP 100MVZ 410 0100 549.00 Prism block kit* for WPP MVZ 410 0 829.00 * Kit including 2 prism blocks WPP 60MVZ loadable with 30 tons per block WPP 100MVZ loadable with 50 tons per block WPP MVZ loadable with 80 tons per block F - Height passage min. I - Width working table WPP 60 MVZ 2040 1 250 201 1485 300 WPP 100 MVZ 2110 1320 920 300 174 1655 360 WPP 100 MVZ D 0 2110 1 1'500 300 174 2240 360 WPP MVZ 2193 0 1100 1100 350 203 1905 410 WPP MVZ D 0 2193 2000 1100 0 350 203 2350 410 Built according to CE directives 145
Thermdrill THERMDRILL - The threaded bushing which really holds firm The THERMDRILL process Convincing arguments: quality, efficiency and price: Tripling the material thickness Shaping without chips by frictional heat + Thread forming = Safe connection Up to three times quicker than with rivet nuts Only a fraction of the material cost Safe grip of steel sheets, round and hollow profiles, in lots of materials Highest loading capacity (e-g. 27 kn at M8 in 2 mm steel sheets) Applicable on common column or bench drills as well as in machining centers 2 mm 6 mm By means of the THERMDRILL procedure a stable threaded bushing is formed without chips from the existing material with only two working steps. Type "form" Forming a bead from the material flowing upward and thus having 1-2 threads more. Type "cut" The material flowing upward is cut off form-locking and makes a neat surface. Recommended max material thickness [mm] (short type) M 4 M 5 M 6 M 8 M 10 M 12 Type "form" 1.5 2.0 2.0 2.5 2.5 3.0 Type "cut" 2.0 3.0 3.0 4.0 4.0 4.5 Select the "long" version for thicker material. Our modular system 1. Tool kit 2. Collet chucks ER 32 3. Basic kit Other thread sizes as well as other accessories are available upon request. The basic equipment includes all you need when working with THERMDRILL. Tool kits = Thermdrill + thread former Collet chuck 1 ER 32 Basic kit Type "form" Type "cut" Size. for Holder M 4 306 0024 306 0044 } MT 2 306 0002 M 5 306 0025 306 0045 344 1126 MT 3 306 0003 Content: 1 collet chuck holder with air ring ER 32 1 hook wrench 1 open-end wrench 1 system box 100 ml threading oil 100 g THERMDRILL paste 1 operating instructions The individual components Thermdrill Thermdrill Thread shaper Lubricant Type "form" Type "cut" Size M 4 306 0104 306 0164 306 0184 Paste for Thermdrilling M 5 306 0105 306 0165 306 0185 (1 kg) M 6 306 0106 306 0166 306 0186 M 8 306 0108 306 0168 306 0188 M 10 306 0110 306 0170 306 0190 306 0090 Thread forming oil (1 306 0092 litre) 1 Standard collet chucks are only required, if they are not yet available in the tool shop 146 M 12 306 0112 306 0172 306 0192 Please find further information under www. optimum-maschinen.de or in the Optimum catalogue!