GB TOOLS 204/205 WELL DONE.
GB Our Philosophy Products. Well done. We have grouped our 50 years of experience in developing and manufacturing high-performance equipment into two basic product lines. All the Red products represent our accumulated skills in product design and development. This is where exclusive, ergonomical design combines with practical functions, premium craftsmanship and good service for improved performance and better quality to meet the most demanding customer requirements. The Blue line represents our entry-level products, which are characterized by their optimized utility at closely calculated prices. All our products provide performance that makes do-it-yourself projects fun as well as combine high functionality with safety and ease of use. Performance and quality are well balanced and offered at prices that put a smile on everyone s face. Einhell. Well done. International Einhell. Well done. The Einhell group employs over 400 people in more than 50 countries around the world. With an annual sales volume that exceeds 0 million electric tools and machines, we are one of the most capable trade partners on a domestic as well as international level. Our strength in the market allows us to achieve outstanding value with each of our products, which are tested by experts on site to ensure quality and safety. In addition, our development work in Germany is subjected to a thorough testing and inspection program. We demonstrate our high performance standards continuously in the form of practiceproven, sophisticated brand products. Einhell. Well done. 2 Jan Teichert Chief Financial Officer Dr. Markus Thannhuber Chief Technical Officer Andreas Kroiss Chairman of the Board of Directors
Tools Handheld electric tools Screwing 5 Drilling / Hammer drilling 7 Mixing 8 Cutting 9 Milling / Planing / Grinding 0 Sawing 2 Other tools 3 Stationary Tools Woodworking technology 4 Compressed air technology 6 Welding technology 23 Metalworking technology 27 Lifting equipment 30 Firewood Cutting 33 Power generation 34 Service 36 Einhell Germany AG recommends accessories from Note: For safe handling of the products please refer to the instructions in the operating manual. 3
4
CORDLESS SCREWDRIVER BT-SD 4,8 F CORDLESS DRILL BT-CD 4,4 2B Nm NiCd 4.8 V / 0.6 Ah = 200 min - 3-5 h R / L 2 x NiCd 4.4 V /.3 Ah = 0-550 min - 2 + Steps 3-5 h Electronic Ø max. 0 mm R / L BIT SET Pivot joint Lamp Clockwise / counter-clockwise switch Charging supply unit 28 screwdriver bits 8 socket wrench sockets Holder for wrench sockets Magnetic bit holder Clockwise / counter-clockwise switch Quick stop Keyless chuck Speed control electronics Additional battery pack SCREWING 0.4 /.2 kg 5 30 x 60 x 70 mm Article number 45.07.02.4 / 3.2 kg 5 355 x 265 x 95 mm Article number 45.33.00 Bit set: 23 pieces Article number 42.580.73 4 0 0 6 8 2 5 5 4 5 8 7 6 4 0 0 6 8 2 5 5 3 8 2 5 0 4 0 0 6 8 2 5 5 7 3 2 6 8 CORDLESS DRILL CORDLESS DRILL CORDLESS DRILL CORDLESS IMPACT DRILL BT-CD 8 BT-CD 8 2B BT-CD 8 h BT-CD 24i Nm Nm Nm Nm x NiCd 8 V /.3 Ah = 0-550 min - 2 + Steps 3-5 h 2 x NiCd 8 V /.3 Ah = 0-550 min - 2 + Steps 3-5 h 2 x NiCd 8 V /.3 Ah = 0-350 min - = 0-00 min - 2 + Steps h 2 x NiCd 24 V /.3 Ah = 0-350 min - = 0-00 min - 2 + + Steps h Electronic Ø max. 0 mm R / L Electronic Ø max. 0 mm R / L Electronic Ø max. 0 mm R / L Electronic Ø max. 3 mm Clockwise / counter-clockwise switch Keyless chuck Speed control electronics Quick stop Clockwise / counter-clockwise switch Keyless chuck Speed control electronics Quick stop Additional battery pack Clockwise / counter-clockwise switch Keyless chuck Speed control electronics Quick stop 2-speed gearing h charger Additional battery pack Clockwise / counter-clockwise switch Keyless chuck 3 mm Speed control electronics 2-speed gearing Battery capacity indicator LED lamp Impact drill function Additional battery pack hour charger Additional handle 2 bits (50 mm).5 / 2.7 kg 5.5 / 3. kg 5.6 / 4.3 kg 5 2.4 / 6.0 kg 3 280 x 285 x 96 mm 280 x 240 x 87 mm 355 x 265 x 95 mm 370 x 30 x 05 mm Article number 45.33.30 Article number 45.33.40 Article number 45.33.0 Article number 45.32.23 4 0 0 6 8 2 5 5 4 2 2 9 4 0 0 6 8 2 5 5 4 2 3 6 4 0 0 6 8 2 5 5 3 8 2 6 7 4 0 0 6 8 2 5 5 4 5 9 3 Weight net / gross Packing dimensions Packaging unit 5
CORDLESS SCREWDRIVER BT-SD 3,6/ Li CORDLESS DRILL BT-CD 0,8/ Li Kit CORDLESS DRILL BT-CD 4,4 Li Lithium-Ion Batteries from Einhell Small and easy to handle Powerful even after prolonged storage, no self-discharge No memory effect Li-Ion 3.6 V /.3 Ah = 200 min - Nm 8 + Steps 3-5 h x Li-Ion 0.8 V /.4 Ah = 0-600 min - Nm 5 + Steps 2 Nm 3-5 h x Li-Ion 4.4 V /.4 Ah = 0-600 min - Nm 5 + Steps 5 Nm 3-5 h With active cell monitoring for maximum safety and battery life R / L Clockwise / counter-clockwise switch Swivel handle 9 torque settings Bit mount with lock LED lamp Battery capacity indicator Charging supply unit Soft grip 4 bits Holster bag Blisterpackaging Electronic Ø max. 0 mm R / L Clockwise / counter-clockwise switch Quick stop Spindle-lock Single sleeve quick-change drill chuck Speed control electronics LED lamp Battery capacity indicator Softgrip Magnetic screw holder Incl. 23 pcs. bit set Electronic Ø max. 0 mm R / L Clockwise / counter-clockwise switch Quick stop Spindle-lock Single sleeve quick-change drill chuck Speed control electronics LED lamp Battery capacity indicator Soft grip Magnetic screw holder 0.4 / 0.8 kg 8.2 / 2.2 kg 5.3 /.6 kg 5 20 x 260 x 65 mm 275 x 275 x 90 mm 235 x 230 x 66 mm Article number 45.33.85 Article number 45.33.49 Article number 45.33.05 4 0 0 6 8 2 5 5 5 9 0 5 7 4 006825 584547 4 0 0 6 8 2 5 5 6 0 8 9 3 CORDLESS DRILL DRYWALL SCREW GUN TOOL KIT BT-CD 0,8/3 Li BT-DY 720 E BT-TK 0,8 Li START / STOP AUTOMATIC 2x STOP AUTO 2 START AUTO 3 STOP Nm Nm 2 x Li-Ion = 0-350 min - 0.8 V /.3 Ah = 0-200 min - 9 + Steps 4 Nm 3-5 h 720 W = 0-2200 min - max. 2 mm 3-5 h 2 x Li-Ion 0.8 V /.3 Ah + Steps R / L = 0-500 min - Electronic Ø max. 0 mm R / L 2-speed gearing Clockwise / counter-clockwise switch Quick stop Spindle-lock Single sleeve quickchange drill chuck (Jacobs) Speed control electronics Additional battery pack Battery capacity display Soft grip 6.35 mm Electronic /4 " Electronic speed control with speed selector Clockwise / counter-clockwise switch Metal gear housing Tool chuck for /4" (6.35 mm) Internal hexagon Adjustable depth stop Auto-start-stop-drive = 0000 min - 80 x 80 x = 20000 min - 80 mm 2.7 Cordless multitool with plunge cut saw blade for wood Grinding / sanding attachment and scraper Supplied with 2 rechargeable batteries Ø 0 mm 6 Nm Cordless drill with soft grip LED light Torque adjustment Level for horizontal working.2 / 2.0 kg 6 2.0 / 2.2 kg 0.7 / 2.8 kg 5 245 x 245 x 67 mm 330 x 220 x 75 mm 340 x 290 x 85 mm Article number 45.33.77 Article number 42.599.00 Article number 44.92.07 4 0 0 6 8 2 5 5 6 4 0 3 7 4 0 0 6 8 2 5 5 3 7 7 0 4 0 0 6 8 2 5 5 8 0 5 6 3 6 Weight net / gross Packing dimensions Packaging unit
IMPACT DRILL BT-ID 550 E IMPACT DRILL BT-ID 70 E 550 W = 0-2700 min - = 0-43200 min - 70 W = 0-2700 min - = 0-43200 min - DRILLING / HAMMER DRILLING 0 mm 3 mm 25 mm Soft grip Clockwise / counter-clockwise switch Keyless chuck Metal depth stop Additional handle Speed control electronics with speed preselection.8 / 2. kg 0 290 x 235 x 73 mm Article number 42.597.80 Ø max. 3 mm 0 mm 3 mm 25 mm Soft grip Clockwise / counter-clockwise switch Keyless chuck Metal depth stop Additional handle Speed control electronics with speed preselection 2. / 2.3 kg 0 307 x 24 x 77 mm Article number 42.597.90 Ø max. 3 mm 4 0 0 6 8 2 5 5 3 8 2 7 4 4 0 0 6 8 2 5 5 3 8 2 8 BIT SET IMPACT DRILL IMPACT DRILL ROTARY HAMMER BT-ID 720 KIT BT-ID 000 E BT-RH 900/ HIGH QUALITY COMPONENTS POWER Bit set: 23 pieces Incl. bit / drill set Article number 42.580.73 4 0 0 6 8 2 5 5 7 3 2 6 8 230 V - 240 V ~ 50 Hz 720 W = 0-2700 min - = 0-43200 min - 00 W = 0-3000 min - = 0-48000 min - 220-240 V ~ 50 Hz 900 W = 850 min - = 400 min - 3 J DRILL AND BIT SET 0 mm 3 mm 25 mm Ø max. 3 mm 0 mm 3 mm 25 mm Ø max. 3 mm 26 mm Ø 55 mm Stop Stop Quick chuck with lock-function Drilling / hammer drilling Right / left turn Speed control electronics with speed preselection Additional handle Metal depth gauge Incl. 65 pieces bit and drill bit set Soft grip Soft grip Clockwise / counter-clockwise switch Key chuck Metal depth stop Additional handle Speed control electronics with speed preselection SDS-Plus adapter Additional handle Hammer stop facility Rotation stop facility with chisel fi xation Metal depth gauge Sturdy aluminium gear head Overload safety clutch 70 pieces: 25 drills: wood, metal, stone 36 bits 7 socket bits Measuring tape bit adapter 2.2 / 3.8 kg 4 30 x 260 x 38 mm 2.3 / 2.5 kg 6 305 x 235 x 77 mm 4.3 / 6.0 kg 3 402 x 305 x 27 mm Article number 42.580.85 Article number 42.597.65 Article number 42.598.00 Article number 42.582.35 4 0 0 6 8 2 5 5 6 3 6 0 4 0 0 6 8 2 5 5 7 7 8 2 2 4 0 0 6 8 2 5 5 3 8 2 9 8 4 0 0 6 8 2 5 5 7 7 0 0 6 7
ROTARY HAMMER BT-RH 600 SDS-PLUS DRILL BIT AND CHISEL SET DEMOLITION HAMMER BT-DH 600/ FLAT CHISEL HEXAGON FOR BT-DH 600/ HIGH QUALITY COMPONENTS POWER For all rotary hammers 2 pieces, in aluminium case: 0 drill bits (Ø 5 - Ø 6 mm), 2 chisels Hexagon 30 mm Width 34 mm Length 40 mm Article number 42.580.90 Article number 4.390.72 230-240 V ~ 50 Hz 600 W = 800 min - = 3900 min - 4 J 4 0 0 6 8 2 5 5 3 8 8 8 5 230 V~ 50 Hz 600 W = 500 min - 43 J Adapter Hex 30 mm 4 0 0 6 8 2 5 5 6 5 7 2 0 32 mm Ø 68 mm Stop Stop SDS-Plus adapter Vibration absorbing handle Rotation stop facility with shiftable chisel fi xation Hammer stop facility Metal depth gauge Additional handle with locking device Overload safety clutch SDS-PLUS DRILL SET Hexagon chuck, 30 mm Additional handle Incl. pointed chisel, fl at chisel For heavy demolition works POINTED CHISEL HEXAGON FOR BT-DH 600/ 5.6 / 7.8 kg 2 440 x 365 x 30 mm For all rotary hammers 0 pcs. drills (Ø 5 - Ø 6 mm, length 0-400 mm) 4.7 / 2.7 kg 690 x 350 x 70 mm Hexagon 30 mm Length 40 mm Article number 42.584.75 Article number 42.580.94 Article number 4.390.67 Article number 4.390.73 4 0 0 6 8 2 5 5 7 7 0 4 4 4 006825 582307 4 0 0 6 8 2 5 5 6 7 7 3 4 0 0 6 8 2 5 5 6 5 7 3 7 PAINT AND MORTAR MIXER PAINT AND MORTAR MIXER MIXER SET HEXAGON BT-MX 00 E BT-MX 400 E Hexagon connection, length 550 mm 3 pieces (paint Ø 60 mm, bitumen Ø 80 mm, mortar Ø 00 mm) Article number 42.583.60 050 W = 0-550 min - Ø 58 mm L = 530 mm 400 W = 80-460 min - Ø 40 mm = 300-700 min - L = 600 mm 4 0 0 6 8 2 5 4 2 5 4 7 3 mm Ø max. 3 mm R / L M 4 Electronic MIXER SET M 4 Soft grip Speed control electronics with speed selection Clockwise / counter-clockwise switch Key chuck Incl. spiral mixing tool Additional handles Can also be used as power drill Speed control electronics Ergonomically-shaped handle Soft grip inserts 2-speed gearbox Metal gear housing Incl. spiral mixing tool Soft start 3.3 / 3.7 kg 5 35 x 255 x 00 mm 4.7 / 6.2 kg 2 325 x 325 x 245 mm M 4 connection Length 585 mm 2 pieces (mortar Ø 35 mm, bitumen Ø 20 mm) MIXING Article number 42.584.67 Article number 42.584.55 Article number 42.583.65 4 0 0 6 8 2 5 5 4 3 9 3 4 0 0 6 8 2 5 5 5 6 5 2 0 4 0 0 6 8 2 5 5 7 2 2 2 3 8 Weight net / gross Packing dimensions Packaging unit
ANGLE GRINDER BT-AG 500 ANGLE GRINDER BT-AG 850 500 W = 000 min - Ø 5 mm 850 W = 000 min - Ø 25 mm M 4 Spindle lock Spindle lock Metal gear head Disc guard Additional handle Flange nut wrench Cutting disc not included M 4 Spindle lock Spindle lock Metal gear head Disc guard Additional handle Flange nut wrench Cutting disc not included DIA-SCHEIBEN-SET DIAMOND DISC SET FÜR FORBT-AG 500 SET ANGLE OF VELCRO GRINDER GRINDING Ø 230 mm / SANDING PAPERS FOR BT-MG 80/.6 /.8 kg 0 295 x 25 x 0 mm 2.2 / 2.5 kg 0 295 x 40 x 5 mm 230 mm 2 pieces CUTTING Article number 44.305.80 Article number 44.305.90 Article number 44.403.33 4 0 0 6 8 2 5 5 3 8 2 0 5 4 0 0 6 8 2 5 5 3 8 2 2 4 0 0 6 8 2 5 4 4 2 5 4 0 ANGLE GRINDER BT-AG 000 ANGLE GRINDER BT-AG 2000 ANGLE GRINDER BT-AG 2350 CUTTING STAND TS 25/5 FOR BT-AG 500 / 800 / 000 For angle grinder with disc diameter 5 and 25 mm Article number 44.30.40 00 W = 000 min - Ø 25 mm 2000 W = 6000 min - Ø 230 mm 2350 W = 6000 min - Ø 230 mm 4 0 0 6 8 2 5 5 0 6 4 5 7 M 4 Spindle lock Toolless disc guard adjustment Spindle lock Metal gear head Flange nut wrench Additional handle Cutting disc not included M 4 Spindle lock Soft start Spindle lock Metal gear head Disc guard adjustment Additional handle Flange nut wrench Cutting disc not included M 4 Spindle lock Soft start Spindle lock Metal gear head Toolless disc guard adjustment Swivel handle Additional handle Flange nut wrench Cutting disc not included CUTTING STAND TS 230 FOR BT-AG 2000 / 2350 2.4 / 2.7 kg 6 40 x 20 x 90 mm 4.8 / 5.5 kg 2 540 x 68 x 25 mm 5.6 / 6.2 kg 2 560 x 80 x 25 mm For angle grinder with disc diameter 230 mm Article number 44.306.0 Article number 44.306.20 Article number 44.306.30 Article number 44.30.50 4 0 0 6 8 2 5 5 3 8 2 2 9 4 006825 538236 4 0 0 6 8 2 5 5 3 8 2 4 3 4 0 0 6 8 2 5 5 0 9 3 6 6 9
MASONRY CHANNEL CUTTER ROUTER BT-MA 300 BT-RO 00 E Kit MILLING / PLANING / GRINDING 8-30 mm 320 W = 9000 min - Ø 25 mm 8-26 mm Infi nitely variable cutting depth Groove widths via spacer rings Integrated dust extraction Soft start Overload cut-out Spindle lock Additional handle 4.9 / 5.5 kg 3 405 x 295 x 240 mm Article number 43.507.20 230-240 V ~ 50 Hz 00 W = 000-30000 min - max. 55 mm Ø 8 mm Electronic Ø 6 mm Continously adjustable cutter depth with vernier adjustment Dust extractor adapter Speed control electronics Spindle lock Multilevel revolver stop Clamp 6 and 8 mm Parallel guide, compass point, copy sleeve Cutter set (2 pcs.) in wooden case 3.7 / 4.6 kg 4 290 x 260 x 60 mm Article number 43.504.7 CUTTER SET FOR ROUTERS 2 pieces Including 6 cutters with guide ring Shaft diameter 8 mm Article number 43.50.99 4 0 0 6 8 2 5 5 4 2 3 8 4 0 0 6 8 2 5 5 8 4 5 5 4 4 0 0 6 8 2 5 4 3 3 9 BISCUIT JOINER ELECTRIC PLANER ELECTRIC PLANER BT-BJ 900 BT-PL 750 BT-PL 900 860 W = 000 min - Ø 00 x Ø 22 x 3.8 mm 750 W = 6500 min - 0-2 mm 900 W = 6500 min - 0-3 mm max. 8 mm 0-90 HM / TCT, t=6 5-35 mm 0-6 mm 82 mm 0-5 mm 82 mm Infi nitely height and angle adjustment 3-step quick adjustment of cutting depth Locking knob for changing cutters Dust bag Face spanner for changing cutters Chip ejection direction switch Carbide planing blade Large blade shaft for perfect results Aluminium planing plate at front Rebate depth stop Parallel guide Dust bag Chip ejection direction switch Carbide planing blade Large blade shaft for perfect results Aluminium planing plate at front Rebate depth stop Parallel guide Dust bag 3.3 / 4.6 kg 2 430 x 70 x 230 mm 2.8 / 3.2 kg 6 300 x 60 x 80 mm 3.0 / 3.5 kg 6 320 x 80 x 70 mm Article number 43.506. Article number 43.452.6 Article number 43.452.80 4 0 0 6 8 2 5 5 3 8 4 5 8 4 0 0 6 8 2 5 5 4 3 2 6 4 0 0 6 8 2 5 5 3 8 4 7 2 0 Weight net / gross Packing dimensions Packaging unit
MULTIFUNCTION TOOL BT-MG 220 E GRINDING AND ENGRAVING TOOL SET BT-MG 35/ DELTA SANDER BT-DS 80 220 W 5000-22000 min - 3 35 W 0000-32000 min - Ø 0.5 /.6 / 2.4 / 3.2 mm 80 W = 0000 min - = 20000 min - 90 x 90 x 2 m Wood 32 mm 50 mm 90 mm Saw blade (32 mm wide) Spade Sanding plate with Velcro fastening Sanding paper Dust extraction adapter Hex key Soft grip Speed control electronics Aluminium gear head Speed control electronics Spindle lock Flexible shaft Telescopic stand rod Transport and storage case 89 pcs. accessory set 90 x 90 x 90 mm Velcro fastening for quick abrasive paper change Connection for dust extractor Abrasive paper Dust extractor adapter STARTER KIT FOR BT-MG 80/ / BT-MG 220 E.8 / 2.0 kg 6 335 x 93 x 0 mm 0.7 / 2.2 kg 6 345 x 225 x 25 mm. /.4 kg 0 35 x 00 x 05 mm For wood and plastic, in parts for alu Article number 44.650.50 Article number 44.9.65 Article number 44.642.30 Article number 44.650.0 4 0 0 6 8 2 5 5 7 9 9 7 0 4 0 0 6 8 2 5 5 7 9 9 8 7 4 0 0 6 8 2 5 5 5 4 9 3 9 4 0 0 6 8 2 5 5 5 3 7 8 ORBITAL SANDER ORBITAL SANDER ECCENTRIC SANDER BELT SANDER BT-OS 50 BT-OS 280 E BT-RS 420 E BT-BS 850/ E 50 W = 500 min - = 23000 min - 280 W = 0-2000 = 0-24000 min - min - 420 W = 6000 - = 2000-3000 min - 26000 min - 850 W 0-380 m/min 76 x 533 mm 230 x 93 mm 87 x 90 mm Ø 2.0 mm Abrasive disc with clamp Additional handle Abrasive paper Dust extractor adapter 280 x 5 mm 230 x 5 mm 227 x 5 mm (Velcro) Abrasive disc with clamp and velcro fastening Additional handle Speed control Abrasive paper Dust bag Aluminium grinding plate Ø 25 mm Electronic Velcro fastening for quick abrasive paper change Speed control Abrasive paper Dust bag 76 x 42 mm Electronic Additional ceramic guard in case of wrongly set belt position Simple, fast belt change Additional handle for perfect work with the belt sander dust bag Speed control Sanding belt.3 /.5 kg 4 2.0 / 2.3 kg 4 2.0 / 2.2 kg 0 3.4 / 3.7 kg 6 270 x 60 x 00 mm 345 x 75 x 25 mm 305 x 88 x 23 mm 370 x 73 x 55 mm Article number 44.605.44 Article number 44.605.32 Article number 44.62.60 Article number 44.662.6 4 0 0 6 8 2 5 5 4 3 3 4 6 4 0 0 6 8 2 5 5 4 3 3 5 3 4 0 0 6 8 2 5 5 3 8 4 8 9 4 0 0 6 8 2 5 5 6 4 2 7 3
JIGSAW BT-JS 400 E PENDULUM JIGSAW BT-JS 650 E PENDULUM JIGSAW BT-JS 800 E 400 W 45-0 - 45 800-3000 min - 8 mm 650 W 45-0 - 45 800-3000 min - 3 2 0 8 mm 800 W 45-0 - 45 0-3000 min - 3 2 0 20 mm 55 mm PE/PP 0 mm 6 mm 80 mm PE/PP 20 mm 0 mm PE/PP 80 mm 25 mm 0 mm Speed control electronics with speed selection Soleplate can be angled up to 45 Dust extraction via adapter Allen key Saw blade Speed control electronics with speed preselection Soleplate can be angled up to 45 Dust extraction via adapter Adjustable pendulum stroke (4 settings) Parallel guide Allen key Saw blade Speed control electronics with speed selection Aluminium soleplate, can be angled up to 45 Dust extraction via adapter Adjustable pendulum stroke (4 settings) LED lamp Toolless blade change Parallel guide Saw blade Softgrip.8 / 2.3 kg 0 2. / 2.4 kg 0 2.3 / 2.6 kg 0 240 x 78 x 208 mm 250 x 233 x 78 mm 258 x 225 x 85 mm SAWING Article number 43.2.00 Article number 43.2.0 Article number 43.2.20 4 0 0 6 8 2 5 5 3 8 5 3 3 4 0 0 6 8 2 5 5 3 8 5 4 0 4 0 0 6 8 2 5 5 3 8 5 5 7 MINI HAND-HELD CIRCULAR SAW BT-CS 860 KIT HAND-HELD CIRCULAR SAW BT-CS 200/ HAND-HELD CIRCULAR SAW BT-CS 400/ SAW BLADE SET FOR BT-CS 860 L / BT-CS 860 KIT every 2 x 6 pieces (2 x 20 teeth TCT, 2 x 80 teeth HSS, 2 x diamond cutting wheel for tiles) Ø 85 x Ø 0 mm 2x 2x 2x Article number 45.02.28 230-240 V ~ 50 Hz 450 W = 6000 min - max. 23 mm 200 W = 5000 min - 55 mm / 90 37 mm / 45 400 W = 4800 min - 66 mm / 90 45 mm / 45 4 0 0 6 8 2 5 5 7 5 3 4 7 t = 20 Ø 85 x Ø 0 mm t = 80 Ø 85 x Ø 0 mm DIA Ø 85 x Ø 0 mm Infi nitely adjustable cutting depth Integrated dust extractor Electronic overload protection Incl. laser Tool to change the saw blade Paralell guide Incl. 6 sawblades, transport and storage case and carrying bag Ø 60 x Ø 6 x 2.5 mm HW / TCT t = 24 Toolless cutting depth adjustment Toolless saw table adjustment TCT saw blade Splitting wedge Parallel guide Tool to change the saw blade Ø 90 x Ø 30 x 2.5 mm HW / TCT t = 24 Toolless cutting depth adjustment Toolless saw table adjustment TCT saw blade Splitting wedge Parallel guide Soft start Tool to change the saw blade CARBIDE-TIPPED SAW BLADE FOR BT-CS 400/ 2.0 / 4.0 kg 3 More information about this article 3.7 / 4.5 kg 4 348 x 257 x 248 mm 4.3 / 5.2 kg 4 355 x 270 x 255 mm Ø 90 x Ø 30 x 2.5 mm 24 teeth 385 x 280 x 70 mm Article number 43.309.80 Scan in the QR code Article number 43.309.32 Article number 43.309.46 Article number 45.02.43 4 0 0 6 8 2 5 5 7 8 9 9 7 4 0 0 6 8 2 5 5 7 7 2 4 0 0 6 8 2 5 5 7 7 0 5 4 0 0 6 8 2 5 5 4 8 2 9 2 Weight net / gross Packing dimensions Packaging unit
HOT GLUE GUN BT-GG 200 P GLUE CARTRIDGES FOR ALL HOT GLUE GUNS Ø x 200 mm 24 pieces Article number 45.22.99 2 W (max. 72 W) Ø mm ca. 5 min 4 0 0 6 8 2 5 4 5 5 0 2 ca. 50 C Support bar 3 hot glue cartridges Ø x 00 mm STAPLE / NAIL SET FOR BT-EN 20 STAPLE / NAIL SET FOR BT-EN 30 E OTHER TOOLS 0.2 / 0.3 kg 0 70 x 59 x 32 mm Article number 45.22.60 Staples: 000 pcs. 4 x 0 mm, 500 pcs. 2 x 0 mm, 500 pcs. 0 x 0 mm Nails: 500 pcs. 6 mm, 500 pcs. 4 mm Article number 4.378.83 Staples: 300 pcs. of each size: 25 x 6, 20 x 6, 5 x 6 mm Nails: 600 pcs. of each length: 32 mm, 20 mm, 500 pcs. 25 mm, 400 pcs. 5 mm Article number 4.378.80 4 0 0 6 8 2 5 5 3 9 5 0 9 4 006825 554656 4 0 0 6 8 2 5 5 3 3 6 9 9 HOT AIR GUN SOLDERING GUN ELECTRIC STAPLER ELECTRIC STAPLER BT-HA 2000/ BT-SG 00 BT-EN 20 BT-EN 30 E a b b a a b b a I = 000 W I = 350 C I = 300 l/min II = 2000 W II = 550 C II = 500 l/min 00 W max. 500 C ca. 2 sec. 20 / min a:.2 -.4 mm b: 8-6 mm a: 8-6 mm b: 2 mm 30 / min a: 6 mm b: 5-25 mm a: 5-32 mm b: 2 mm.6 -.26 mm. -.25 mm Electronic Safe and solid standing for stationary use 2 heat settings Offset nozzles for fl exibility Heat nozzle Wide nozzle Reducer nozzle Refl ector nozzle Paint scraper Integrated soldering position light Easy to replace soldering tip 2 soldering tips Cutting tip Solder wire Solder grease Stapling force control Magazine fi lling level indicator Safety lug ON/OFF switch 00 staples.4 x 2 mm 00 nails 5 mm Electronic stapling force control Magazine fi lling level indicator Safety lug ON/OFF switch 300 staples 25 x 6 mm 200 staples 5 x 6 mm 300 nails 32 mm 200 nails 25 mm 0.7 /.6 kg 0 0.6 /.0 kg 0. /.3 kg 0.7 / 2.0 kg 0 296 x 85 x 272 mm 265 x 220 x 60 mm 235 x 70 x 60 mm 240 x 20 x 65 mm Article number 45.20.67 Article number 46.00.30 Article number 42.578.60 Article number 42.578.43 4 0 0 6 8 2 5 5 4 3 2 3 0 4 0 0 6 8 2 5 5 3 8 4 4 4 006825 538502 4 0 0 6 8 2 5 5 4 3 2 5 4 3
BELT AND DISK SANDER BT-US 400 WOODWORKING LATHE BT-WW 000 GRINDING BELT SET FOR BT-US 400 LATHE BLADE SET FOR BT-WW 000 3 pieces Width / Length 00 x 94 mm Grit size 60 / 80 / 20 K 5 pieces Flat and round-nose chisel Gouge chisel Round and pointed chisel Article number 44.98.30 Article number 43.2.00 375 W = 450 min - Ø 50 S2 30 min 350 W S2 30 min = 80/80/ 700/2480 min - lmax = 000 mm Ømax = 356 mm 4 0 0 6 8 2 5 4 4 3 7 8 3 4 0 0 6 8 2 5 4 3 5 5 00 x 95 mm Belt grinding device Support table (can be angled from 0 to 45 ) Cross stop (- 60 to + 60 ) Disc grinder with quick-fi t fastening system 4 rubber feet to ensure that the machine stands securely Strong guide frame Tailstock with self-centering live spindle tip Workpiece support Front end driver ring Face plate Ø 43 mm Long-lasting V-belt drive which can be adjusted to 4 settings GRINDING/SANDING PAPER SET FOR BT-US 400 5.6 / 8.0 kg 500 x 300 x 260 mm 27.5 / 38.0 kg 500 x 230 x 260 mm 3 pieces Velcro fastening Ø 50 mm Grit size 80 / 20 / 80 K Article number 44.92.53 Article number 43.2.02 Article number 44.98.45 4 0 0 6 8 2 5 5 4 5 5 7 4 0 0 6 8 2 5 5 4 0 6 4 0 0 6 8 2 5 5 2 9 0 3 6 4 Weight net / gross Packing dimensions Packaging unit
5
COMPRESSOR KIT COMPRESSOR COMPRESSOR COMPRESSOR BT-AC 80 KIT BT-AC 200/24 OF BT-AC 200/50 OF BT-AC 240/50/0 OF 220-240 V ~ 50 Hz. kw (.5 HP) S3 5% = 3550 min - 8 bar max. 80 l/min. kw (.5 HP) S3 25% = 2850 min - 8 bar max. 40 l/min. kw (.5 HP) = 2850 min - 8 bar max. 40 l/min.5 kw S3 25% = 4000 min - 0 bar max. 240 l/min l l l 3 m Oilfree Transport handle Accessory compartment Compressed air hose with quick-lock coupling Blow-out pistol with pressure gauge Hose for use as tire pressure gauge Nozzle for use as blow-out pistol Adaptor set 5.8 / 6.5 kg 5 24 l Oilfree Pressure gauge & quick-lock coupling Foot with suction cup function Intake fi lter, non-return valve, safety valve Pressure regulator Drain cock 0 year warranty against rusting through of the tank 9.5 / 2.0 kg 50 l Oilfree Pressure gauge & quick-lock coupling Foot with suction cup function Intake fi lter, non-return valve, safety valve Pressure regulator Drain cock 0 year warranty against rusting through of the tank 23.3 / 26.0 kg 50 l Oilfree Transportgriff, Räder für einfachen Transport Druckschalter Sicherheitsventil Pressure gauge Rückschlagventil & quick-lock coupling Ansaugfi Intake lter Pumpe fi lter, ölfrei non-return Druckminderer, valve, safety Entwässerungshahn valve Pressure regulator Manometer ON/ und Schnellkupplung OFF switch Drain für geregelten cock 0 Arbeitsdruck year warranty Zylinder against 0 rusting Jahre Garantie through of gegen the tank Durchrostung des Kessels Transport handle, large wheels for easy transport Pressure switch intake fi lter non-return valve safety valve pump oilfree Pressure reducer drain cock Pressure gauge and quick-lock coupling for regulated working pressure, cylinder 0 year warranty against rusting through 22.2 / of 23.5 the tank kg 470 x 20 x 335 mm 570 x 445 x 255 mm 770 x 320 x 725 mm 865 x 340 x 340 mm Article number 40.205.20 Article number 40.205.05 Article number 40.204.80 Article number 40.03.90 4 0 0 6 8 2 5 5 5 3 7 3 4 4 0 0 6 8 2 5 5 5 0 0 0 9 4 0 0 6 8 2 5 5 7 0 3 4 0 0 6 8 2 5 5 7 6 0 9 2 COMPRESSOR COMPRESSOR COMPRESSOR COMPRESSOR BT-AC 230/24 BT-AC 270/50 BT-AC 400/50 BT-AC 320/50/0 DE: price/performance Very Good DE: Price tip.5 kw (2 HP) S2 5 min = 2850 min - 8 bar max. 206 l/min.8 kw (2.5 HP) = 2850 min - 8 bar max. 262 l/min 2.6 kw (3.5 HP) S2 30 min = 2850 min - 8 bar max. 400 l/min 2.2 kw (3 HP) = 2850 min - 0 bar max. 320 l/min l l l l 24 l Oil lubricated Pressure gauge & quick-lock coupling Foot with suction cup function Intake fi lter, non-return valve, safety valve Pressure regulator Drain cock 0 year warranty against rusting through of the tank 24.8 / 26.6 kg 595 x 270 x 605 mm 50 l Oil lubricated Pressure gauge & quick-lock coupling Foot with suction cup function Intake fi lter, non-return valve, safety valve Pressure regulator Drain cock 0 year warranty against rusting through of the tank 32.0 / 35.0 kg 775 x 325 x 730 mm 50 l Oil lubricated Transportgriff, große Räder für einfachen Transport Druckschalter Pressure Sicherheitsventil gauge Rückschlagventil & quick-lock coupling Ansaugfi lter Intake Pumpe fi ölgeschmiert lter, non-return Ölstandskontrolle valve, safety über Schauglas valve ON/OFF Druckminderer, switch Ent-wässerungshahn regulator Manometer Drain und cock Schnellkupplung 0 year warranty für un-/geregelten against Pressure rusting Arbeitsdruck through 2 Zylinder of the tank 0 Jahre Garantie gegen Durchrostung des Kessels Transport handle, large wheels for easy transport Pressure switch intake fi lter non-return valve safety valve pump lubricated with oil Oil level check by scale Pressure reducer, drain cock Pressure gauge and quick-lock coupling for unregulated/regulated working 40.0 pressure, / 42.5 2 cylinders kg 0 year warranty against rusting through of the tank 800 x 360 x 730 mm 50 l Oil lubricated Belt drive Oil level check by scale Pressure reducer Drain cock Pressure gauge and quick-lock coupling for unregulated / regulated working pressure 2 cylinders 0 year warranty against rusting through of the tank 60.0 / 63.0 kg 840 x 40 x 750 mm Article number 40.03.50 Article number 40.03.70 Article number 40.0.70 Article number 40.03.80 4 0 0 6 8 2 5 5 6 6 7 7 2 4 0 0 6 8 2 5 5 7 0 7 5 5 4 0 0 6 8 2 5 5 5 0 2 5 2 4 0 0 6 8 2 5 5 7 4 7 4 6 6 Weight net / gross Packing dimensions Packaging unit
SHORT BLOW-OUT PISTOL LONG BLOW-OUT PISTOL TIRE PRESSURE GAUGE For all compressors For all compressors Working pressure 0-8 bar Incl. discharge nozzle Article number 4.33.00 Article number 4.33.02 Article number 4.370.00 4 0 0 6 8 2 5 4 0 6 5 4 0 0 6 8 2 5 4 7 0 6 7 4 0 0 6 8 2 5 4 6 4 TIRE PRESSURE GAUGE PROFI PAINT SPRAY GUN WITH GRAVITY-FEED CAN PAINT SPRAY GUN PROFI WITH GRAVITY-FEED CAN PAINT SPRAY GUN WITH SUCTION-FEED CAN Working pressure 0-8 bar Incl. discharge nozzle and big gauge Incl. tire infl ating adapter Point / wide cone regulator Filling max. 0.6 l Working pressure 3-4 bar Point / wide cone regulator Filling max. 0.6 l Working pressure 3-3.5 bar Incl. air volume control Rotating nozzle with point/wide cone regulator Filling max. l Working pressure 3-4 bar Article number 4.33.0 Article number 4.330.00 Article number 4.330.30 Article number 4.329.00 4 0 0 6 8 2 5 5 7 4 7 3 4 0 0 6 8 2 5 4 0 0 4 0 0 6 8 2 5 5 7 4 8 0 4 0 0 6 8 2 5 4 0 0 3 SPRAY GUN WITH SUCTION-FEED CAN COMPRESSED AIR TOOL SET PROFESSIONAL COMPRESSED AIR TOOL SET JET GUN WITH SUCTION-FEED CAN Filling max. 0.9 l Working pressure 3-6 bar 3 pieces Spiral hose 4 m 5 pieces Spiral hose 4 m Filling max. l Working pressure 3-8 bar Article number 4.332.00 Article number 4.327.4 Article number 4.327.20 Article number 4.333.00 4 0 0 6 8 2 5 4 0 7 2 4 0 0 6 8 2 5 4 7 0 5 0 4 0 0 6 8 2 5 4 0 0 2 0 4 0 0 6 8 2 5 4 0 8 9 SUCTION-FEED SPRAY PISTOL UNDERSEAL GUN AIR IMPACT SCREWDRIVER SET DSS 260/2 AIR RATCHET SCREWDRIVER SET DRS 200/2 Working pressure 6 bar max. Nozzles 3 x Ø 5 mm Working pressure 3-8 bar Working pressure max. 6.3 bar Air consump. approx. 5 l/min Torque max. 32 Nm Working pressure max. 6.3 bar Air consump. approx. 22 l/min Torque max. 68 Nm Article number 4.334.00 Article number 4.335.0 Article number 4.389.0 Article number 4.39.70 4 0 0 6 8 2 5 4 0 2 4 0 0 6 8 2 5 4 3 3 4 0 0 6 8 2 5 5 0 4 3 6 4 0 0 6 8 2 5 5 0 4 3 8 5 7
AIR CHIPPING HAMMER SET DMH 250/2 AIR ROD GRINDER SET DSL 250/2 COMPRESSED AIR ECCENTRIC SANDER DSE 25 AIR TACKER SET DTA 25/2 Working pressure max. 6.3 bar Air consump. approx. 5 l/min Blow rate 4500/min Working pressure max. 6.3 bar Air consump. approx. 28 l/min Idling speed 22000 min - Grinding disk Ø 25 mm Working pressure max. 6.3 bar / Air consump. approx. 06 l/min Working pressure max. 8.3 bar Air consump. approx. 0. l/shot Clamping width 5.7 mm Article number 4.390.08 Article number 4.385.20 Article number 4.333.25 Article number 4.377.55 4 0 0 6 8 2 5 5 0 4 3 9 2 4 0 0 6 8 2 5 5 0 4 3 7 8 4 0 0 6 8 2 5 5 8 6 0 7 4 0 0 6 8 2 5 5 0 4 4 5 COMPRESSED AIR CLAMPS COMPRESSED AIR CLAMPS COMPRESSED AIR CLAMPS COMPRESSED AIR CLAMPS Dimensions 5 x 3 mm 3000 pieces Dimensions 5 x 6 mm 3000 pieces Dimensions 5 x 25 mm 3000 pieces Dimensions 5 x 40 mm 3000 pieces Article number 4.378.50 Article number 4.378.55 Article number 4.378.60 Article number 4.378.6 4 0 0 6 8 2 5 5 0 4 4 2 2 4 0 0 6 8 2 5 5 0 4 4 3 9 4 0 0 6 8 2 5 5 0 4 4 4 6 4 0 0 6 8 2 5 5 0 5 7 8 8 COMPRESSED AIR NAILS COMPRESSED AIR NAILS COMPRESSED AIR NAILS SPECIAL COMPRESSED AIR OIL Dimensions 25 mm 3000 pieces Dimensions 40 mm 3000 pieces Dimensions 50 mm 3000 pieces Contents: 500 ml For all compressed air tools Article number 4.378.7 Article number 4.378.72 Article number 4.378.73 Article number 4.383.0 4 0 0 6 8 2 5 5 0 4 4 6 0 4 0 0 6 8 2 5 5 0 4 8 6 6 4 0 0 6 8 2 5 5 0 5 7 9 5 4 0 0 6 8 2 5 4 2 7 0 MINI OILER FILTER + PRESSURE REDUCER FILTER + PRESSURE REDUCER COMBINATION CONDITIONING UNIT WITH OILER R /4" internal thread R /4" external thread Adjustable oil quantity Article number 4.350.02 Article number 4.342.00 Article number 4.34.00 Article number 4.350.0 4 0 0 6 8 2 5 5 8 6 4 4 0 0 6 8 2 5 4 0 0 5 4 0 0 6 8 2 5 4 0 0 4 4 4 0 0 6 8 2 5 4 0 8 8 Weight net / gross Packing dimensions Packaging unit
COMBINATION CONDITIONING UNIT WITH OILER COMPLETE SPIRAL HOSE COMPLETE SPIRAL HOSE Adjustable oil quantity Length 4 m / Ø 6 mm Maximum pressure 8 bar Nipple and coupling 6.35 mm (/4") Length 8 m / Ø 6 mm Maximum pressure 8 bar Nipple and coupling 6.35 mm (/4") Article number 4.350.00 Article number 4.394.0 Article number 4.394.20 4 0 0 6 8 2 5 4 0 0 7 5 4 0 0 6 8 2 5 4 7 3 7 4 0 0 6 8 2 5 4 7 4 4 COMPLETE FABRIC HOSE COMPLETE FABRIC HOSE COMPLETE FABRIC HOSE AUTOMATIC HOSE ROLLER Length 0 m / Ø 6 mm Maximum pressure 5 bar Nipple and coupling Length 5 m / Ø 6 mm Maximum pressure 5 bar Nipple and coupling Length 5 m / Ø 9 mm Maximum pressure 0 bar Nipple and quick release coupling Length 9 m + m Maximum pressure 2 bar Swivelling holder Article number 4.38.00 Article number 4.382.00 Article number 4.382.0 Article number 4.380.00 4 0 0 6 8 2 5 4 0 0 8 2 4 0 0 6 8 2 5 4 0 0 9 9 4 0 0 6 8 2 5 5 7 4 6 6 4 0 0 6 8 2 5 5 0 9 5 6 4 QUICK-LOCK COUPLING QUICK-LOCK COUPLING QUICK LOCK COUPLING QUICK-LOCK COUPLING R /4" external thread R 3/8" external thread R /2" external thread R /4" internal thread Article number 4.392.07 Article number 4.392.08 Article number 4.392.09 Article number 4.392.06 4 0 0 6 8 2 5 5 6 0 8 2 4 4 0 0 6 8 2 5 5 6 0 8 3 4 006825 596939 4 0 0 6 8 2 5 4 0 3 3 4 QUICK-LOCK COUPLING QUICK LOCK COUPLING QUICK-LOCK COUPLING QUICK-LOCK COUPLING R 3/8" internal thread R /2" internal thread Ø 6 mm Ø 9 mm Article number 4.392.05 Article number 4.392.0 Article number 4.393.0 Article number 4.393.02 4 0 0 6 8 2 5 4 0 3 2 7 4 006825 599046 4 0 0 6 8 2 5 5 8 6 3 8 4 0 0 6 8 2 5 5 8 6 4 5 9
HOSE CONNECTOR SET DN7 ATTACHABLE SLEEVE ATTACHABLE SLEEVE HOSE CONNECTION TUBE Ø 6 mm One-hand quick-lock coupling Ø 6 mm Ø 9 mm Ø 6 mm Article number 4.395.00 Article number 4.396.60 Article number 4.396.6 Article number 4.393.0 4 0 0 6 8 2 5 4 0 3 6 4 0 0 6 8 2 5 4 6 9 0 4 0 0 6 8 2 5 5 8 6 2 4 0 0 6 8 2 5 4 7 2 0 HOSE CONNECTION TUBE HOSE NOZZLE HOSE NOZZLE THREADED NIPPLE Ø 9 mm Ø 6 mm R /4" external thread Ø 6 mm R 3/8" external thread R /4" external thread Article number 4.393.20 Article number 4.396.65 Article number 4.396.66 Article number 4.396.55 4 0 0 6 8 2 5 5 8 6 5 2 4 0 0 6 8 2 5 5 8 6 7 6 4 0 0 6 8 2 5 5 8 6 6 9 4 0 0 6 8 2 5 5 6 2 3 4 7 THREADED NIPPLE THREADED NIPPLE THREADED NIPPLE DOUBLE NIPPLE R 3/8" external thread R /4" internal thread R 3/8" internal thread R /4" external thread Article number 4.396.50 Article number 4.396.40 Article number 4.396.45 Article number 4.396.20 4 0 0 6 8 2 5 4 6 8 3 4 0 0 6 8 2 5 4 6 7 6 4 0 0 6 8 2 5 5 8 6 8 3 4 0 0 6 8 2 5 4 6 5 2 DOUBLE NIPPLE REDUCTION REDUCTION REDUCTION R 3/8" external thread R 3/8" external thread R /4" external thread R 3/8" external thread R /4" internal thread R /2 external thread R 3/8" internal thread Article number 4.396.0 Article number 4.396.30 Article number 4.396.00 Article number 4.396.05 4 0 0 6 8 2 5 4 6 4 5 4 0 0 6 8 2 5 4 6 6 9 4 0 0 6 8 2 5 4 6 2 4 0 0 6 8 2 5 5 6 2 3 3 0 20 Weight net / gross Packing dimensions Packaging unit
DISTRIBUTOR CLIP KIT MICHELIN-NIPPLE R 3/8" internal thread For external diameters of 8-2 mm 5 pieces DN 6 Article number 4.396.80 Article number 4.396.70 Article number 4.393.30 4 0 0 6 8 2 5 4 7 3 4 0 0 6 8 2 5 4 7 0 6 4 0 0 6 8 2 5 5 8 8 7 2 INFLATION ADAPTER KIT 8 pieces Article number 4.396.95 4 0 0 6 8 2 5 5 4 7 5 Note: For safe handling of the products please refer to the instructions in the operating manual. 2
22
ELECTRIC WELDER BT-EW 50 ELECTRIC WELDER BT-EW 60 ELECTRIC WELDER BT-EW 200 6 A I 2: 40-80 A I k max.: 20 A Ø.6-2.5 mm 230/400 V ~ 50 Hz 6 A I 2: 55-60 A Ø 2-4 mm Imax: 250 A 230/400 V ~ 50 Hz 6 A I2: 57-200 A Ø 2-4 mm Infi nitely adjustable welding current Thermostat with pilot lamp Carry handle Fan cooling Infi nitely adjustable welding current Thermostat with pilot lamp Mobile 2 mains lead Fan cooling Infi nitely adjustable welding current Thermostat with pilot lamp Mobile Adapter cable 230/400 V.2 / 2. kg 400 x 230 x 290 mm 20.6 / 22.7 kg 490 x 280 x 335 mm 2.6 / 23.2 kg 490 x 280 x 340 mm Article number 5.440.54 Article number 5.460.40 Article number 5.490.40 4 0 0 6 8 2 5 5 4 6 4 6 0 4 0 0 6 8 2 5 5 4 6 3 9 2 4 0 0 6 8 2 5 5 4 6 5 6 INVERTER WELDER BT-IW 00 INVERTER WELDER BT-IW 50 FLUX CORED WIRE WELDER BT-FW 00 6 A I 2: 0-80 A Ø.6-2.5 mm 230V ~ 50 Hz 6 A I 2: 20-50 A Ø.6-4 mm 6 A 45 / 90 A 2 x TIG / WIG OPTION Fan cooling Thermostat with pilot lamp Infi nitely adjustable welding current Electrode holder Earth terminal Carrying strap TIG equipment available as an optional accessory TIG / WIG OPTION Fan cooling Thermostat with pilot lamp Infi nitely adjustable welding current Electrode holder Earth terminal Carrying strap TIG equipment available as an optional accessory Ø 0.9 mm max. 0.4 kg Carrying strap Earth terminal Burner Infi nitely adjustable wire feed Overheating indicator Welding shield Slag hammer Fan cooling 4. / 5.5 kg 5.8 / 7. kg 4.0 / 5.3 kg 220 x 80 x 270 mm 350 x 205 x 25 mm 55 x 230 x 340 mm Article number 5.44. Article number 5.44.50 Article number 5.752.20 4 0 0 6 8 2 5 5 4 6 4 7 7 4 0 0 6 8 2 5 5 7 8 2 4 9 4 0 0 6 8 2 5 5 4 9 9 2 8 Weight net / gross Packing dimensions Packaging unit 23
SHIELDING GAS WELDER BT-GW 50 SHIELDING GAS WELDER BT-GW 70 SHIELDING GAS WELDER BT-GW 90 D WELDING TEXTBOOK PRACTICAL WELDING For all conventional welding methods In German language Article number 5.907.00 6 A 25-20 A (max. 50 A) 6 x 6 A 25-35 A (max. 70 A) 6 x 230 V/ ~ 50 Hz 6 A 25-60 A (max. 90 A) 6 x 4 0 0 6 8 2 5 5 6 3 3 Ø 0.6-0.8 mm max. 5 kg Infi nitely Ø 0.6-0.8 mm max. 5 kg Infi nitely Ø 0.6 -.0 mm max. 5 kg Infi nitely WELDING SHIELD Fan cooling Thermostat with pilot lamp Complete with fl exible hose pack Infi nitely adjustable wire feed Gas-cooled torch Welding shield Pressure reducer 2 wheels Fan cooling Thermostat with pilot lamp Complete with fl exible hose pack Infi nitely adjustable wire feed Gas-cooled torch Welding shield Pressure reducer 4 wheels Fan cooling Thermostat with pilot lamp Complete with fl exible hose pack Infi nitely adjustable wire feed Gas-cooled torch Welding shield and adapter cable Pressure reducer 4 wheels 25.4 / 28.6 kg 695 x 300 x 450 mm 34.6 / 37.0 kg 705 x 325 x 460 mm 38. / 4.0 kg 705 x 325 x 470 mm DIN glas Article number 5.749.70 Article number 5.749.80 Article number 5.749.90 Article number 5.842.00 4 0 0 6 8 2 5 5 3 8 0 5 2 4 0 0 6 8 2 5 5 3 8 0 6 9 4 0 0 6 8 2 5 5 3 8 0 7 6 4 0 0 6 8 2 5 5 2 0 3 6 HEAD WELDING SAFETY SHIELD AUTOMATIC WELDING SCREEN DIN GLASSES STEEL WIRE BRUSH Protection class 9-3 Shading time: /30000 s Solar area 5 x clear glass x welding glass DIN 9 Dimension: 0 x 90 mm Article number 5.842.0 Article number 5.842.50 Article number 5.843.00 Article number 5.934.00 4 0 0 6 8 2 5 5 2 3 5 4 0 0 6 8 2 5 5 4 7 9 4 0 0 6 8 2 5 5 2 0 4 3 4 0 0 6 8 2 5 5 6 9 0 4 LEATHER WELDING GAUNTLETS LEATHER WELDING APRON ALL-METAL SLAG HAMMER EARTH TERMINAL FOR ALL WELDING SETS For all electric and fl ux-cored wire welders Max. welding current 300 A Article number 5.935.00 Article number 5.936.00 Article number 5.84.0 Article number 5.925.00 4 0 0 6 8 2 5 5 6 9 5 9 4 0 0 6 8 2 5 5 6 9 8 0 4 0 0 6 8 2 5 5 2 2 0 4 0 0 6 8 2 5 5 6 8 0 5 24 Weight net / gross Packing dimensions Packaging unit
ELECTRODE HOLDER FOR ALL ELECTRIC WELDERS ANGLE MAGNET FOR ALL WELDING SETS GAS NOZZLE CLEANER FOR ALL SHIELDING GAS WELDERS Max. welding current 250 A 45 / 90 / 35 With 3 fl exible cleaning blades Article number 5.927.00 Article number 5.922.00 Article number 5.924.00 4 0 0 6 8 2 5 5 6 8 2 4 0 0 6 8 2 5 5 2 2 5 8 4 0 0 6 8 2 5 5 6 7 7 5 CONICAL GAS NOZZLE FOR ALL SHIELDING GAS WELDERS CONTACT TUBES FOR BT-FW 00 CONTACT TUBES FOR ALL SHIELDING GAS WELDERS CONTACT TUBES FOR ALL SHIELDING GAS WELDERS 2 pieces Ø 0.9 mm 5 pieces Ø 0.6 mm 5 pieces Ø 0.8 mm 5 pieces Article number 5.76.0 Article number 5.762.60 Article number 5.762.00 Article number 5.762.0 4 0 0 6 8 2 5 5 6 6 6 9 4 0 0 6 8 2 5 5 5 4 7 7 9 4 0 0 6 8 2 5 5 6 6 8 3 4 0 0 6 8 2 5 5 6 6 9 0 PRESSURE REDUCERS FOR ALL SHIELDING GAS WELDERS PRESSURE REDUCERS FOR ALL SHIELDING GAS WELDERS PISTON SPRAY FOR ALL SHIELDING GAS WELDERS ARGON GAS FOR ALL SHIELDING GAS WELDERS rate pressure gauges Infi nitely adjustable delivery 2 pressure gauges Cylinder pressure Infi nitely adjustable delivery rate Capacity 500 ml Filling pressure: 60 bar Disposable Article number 5.765.08 Article number 5.765.06 Article number 5.760.5 Article number 5.765.0 4 0 0 6 8 2 5 5 6 4 4 7 4 0 0 6 8 2 5 5 6 5 4 6 4 0 0 6 8 2 5 5 6 5 2 2 4 0 0 6 8 2 5 5 6 9 ARGON-CO 2 GAS FOR ALL SHIELDING GAS WELDERS CO 2 GAS FOR ALL SHIELDING GAS WELDERS WIG WELDING TORCH KIT FOR BT-IW 00, BT-IW 50, BT-IW 60 WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS Argon 80% CO 2 20% Filling pressure: 60 bar Disposable Filling pressure: 60 bar Disposable Ø 0.6 mm Weight 0.8 kg Article number 5.76.03 Article number 5.765.00 Article number 5.44.32 Article number 5.767.00 4 0 0 6 8 2 5 5 6 4 5 4 4 0 0 6 8 2 5 5 6 0 2 4 0 0 6 8 2 5 5 8 0 5 7 0 4 0 0 6 8 2 5 5 6 5 7 25
WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS Ø 0.6 mm Weight 5 kg Ø 0.8 mm Weight 0.8 kg Ø 0.8 mm Weight 5 kg Ø 0.8 mm Weight 5 kg Article number 5.763. Article number 5.767.02 Article number 5.763.5 Article number 5.763.0 4 0 0 6 8 2 5 5 6 0 8 9 4 0 0 6 8 2 5 5 7 0 0 0 4 0 0 6 8 2 5 5 6 3 2 4 4 0 0 6 8 2 5 5 6 0 7 2 WELDING WIRE: CrNi FOR ALL SHIELDING GAS WELDERS FLUX CORED WELDING WIRE FOR BT-FW 00 ROD ELECTRODES FOR ALL ELECTRIC WELDERS ROD ELECTRODES FOR ALL ELECTRIC WELDERS Ø 0.6 mm Weight 0.6 kg Ø 0.9 mm Weight 0.4 kg Ø 2.0 x 300 mm 25 pieces Ø 2.0 x 300 mm 00 pieces Article number 5.767.20 Article number 5.762.50 Article number 5.93.20 Article number 5.97.35 4 0 0 6 8 2 5 5 6 7 4 0 0 6 8 2 5 5 5 4 7 6 2 4 0 0 6 8 2 5 5 2 2 7 2 4 0 0 6 8 2 5 5 0 6 0 5 ROD ELECTRODES FOR ALL ELECTRIC WELDERS ROD ELECTRODES FOR ALL ELECTRIC WELDERS ROD ELECTRODES FOR ALL ELECTRIC WELDERS ROD ELECTRODES FOR ALL ELECTRIC WELDERS Ø 2.5 x 350 mm 25 pieces Ø 2.5 x 350 mm 00 pieces Ø 2.5 x 350 mm 75 pieces Ø 3.2 x 350 mm 25 pieces Article number 5.94.20 Article number 5.97.36 Article number 5.97.39 Article number 5.95.20 4 0 0 6 8 2 5 5 2 2 8 9 4 0 0 6 8 2 5 5 0 6 2 4 0 0 6 8 2 5 5 0 6 3 4 4 0 0 6 8 2 5 5 2 2 9 6 ROD ELECTRODES FOR ALL ELECTRIC WELDERS Ø 3.2 x 350 mm 5 pieces Article number 5.97.40 4 0 0 6 8 2 5 5 0 6 3 5 8 26 Weight net / gross Packing dimensions Packaging unit
BENCH DRILL BENCH DRILL BENCH DRILL BENCH DRILL BT-BD 40 BT-BD 50 BT-BD 70 BT-BD 80 E DK: Good purchase, 3/200 350 W = 650 - max. 50 mm S2 5 min 3000 min - 500 W = 280 - max. 50 mm S2 5 min 2500 min - 630 W = 240 - max. 60 mm S2 5 min 2520 min - 550 W = 450 - max. 80 mm 2500 min -.5-3 mm -45 45 04 mm Infi nite table height adjustment Scroll chuck Adjustable depth stop for precise drilling Tilting and pivoting drill table Drilling spindle with ball bearings 3-6 mm -45 45 5 mm Infi nite table height adjustment Scroll chuck Swiveling scale ring for precise setting of the drill depth Tilting and pivoting drill table Drilling spindle with ball bearings.5-6 mm -45 45 26 mm MK2 to 20 mm Infi nite table height adjustment Scroll chuck MK2 chuck Swiveling scale ring for precise setting of the drill depth Tilting and pivoting drill table Vise supplied Drilling spindle with ball bearings 3-6 mm MK2 to 20 mm -45 45 60 mm Infi nitely adjustable speed control Quick-change drill chuck MK2 chuck Cross line laser Incl. digital display for spindle speed Adjustable depth stop for precise drilling Tilting and pivoting drill table Pull-out roll base 9.9 / 5.8 kg 8.0 / 9.4 kg 27.0 / 3.0 kg 37.3 / 40.2 kg 458 x 355 x 228 mm 50 x 260 x 385 mm 652 x 420 x 260 mm 734 x 500 x 275 mm Article number 42.504.45 Article number 42.505.55 Article number 42.505.90 Article number 42.507.0 4 006825 59286 4 006825 58687 4 0 0 6 8 2 5 5 0 5 0 2 3 4 0 0 6 8 2 5 5 4 6 4 8 4 27
BENCH DRILL BENCH DRILL BENCH DRILL WET-DRY GRINDER BT-BD 020 BT-BD 020 D BT-BD 625 D BT-WD 50/200 700 W = 20 - max. 80 mm S2 5 min 2500 min - 400 V ~ 50 Hz 700 W = 20 - max. 80 mm S2 5 min 2220 min - 400 V ~ 50 Hz 700 W = 20 - max. 80 mm S2 5 min 2500 min - Trockenscheibe 250 W = 2950 min - = 34 min - S2 30 min 3-6 mm MK2 to 20 mm -45 45 69 mm Infi nite table heigh adjustment Quick-change drill chuck MK2 chuck Swiveling scale ring for precise setting of the drill depth Tilting and pivoting drill table Vise supplied Drilling spindle with ball bearings 3-6 mm -45 45 69 mm MK2 to 20 mm Infi nite table height adjustment Quick-change drill chuck MK2 chuck Tilting and pivoting drill table Vise supplied Drilling spindle with ball bearings Reverse facility 3-6 mm -45 45 69 mm MK3 to 25 mm Infi nite table height adjustment Quick-change drill chuck MK3 chuck Tilting and pivoting drill table Vise supplied Drilling spindle with ball bearings Reverse facility Ø 50 x Ø 20 Ø 200 x Ø 40 Adjustable tool support Sturdy worm gearing for the wet grinding disc Slow-speed, fi ne-grained wet grinding disc Corrosion-resistant water bath container RCD plug for protection of life and health 52.5 / 54.5 kg 52.5 / 54.5 kg 60.0 / 62.0 kg 9.7 / 0.3 kg 800 x 490 x 295 mm 800 x 490 x 295 mm 45 x 465 x 295 mm 420 x 260 x 230 mm Article number 42.507.85 Article number 42.507.90 Article number 42.52.0 Article number 44.72.5 4 0 0 6 8 2 5 5 0 5 0 0 9 4 0 0 6 8 2 5 5 0 5 0 6 4 0 0 6 8 2 5 5 0 4 9 9 6 4 0 0 6 8 2 5 5 3 7 7 0 3 BENCH GRINDER BENCH GRINDER BENCH GRINDER BELT AND DISK SANDER BT-BG 50 BT-BG 75 BT-BG 200 BT-US 240 50 W = 2950 min - Ø 50 x Ø 2.7 x S2 30 min 6 mm 400 W = 2800 min - Ø 75 x Ø 32 x S2 30 min 25 mm 400 W = 2800 min - Ø 200 x Ø 32 x S2 30 min 25 mm 240 W = 2800 min - Ø 50 x Ø 2.7 x S2 30 min 20 mm 50 x 686 mm Adjustable work supports Safety hoods closed off at the sides Sturdy, compact design in metal Incl. fi ne and coarse grinding / sanding wheel Ball bearing mounted shaft with zero play 4 rubber feet to ensure that the machine stands securely Adjustable work supports Safety hoods closed off at the sides Sturdy, compact design in metal Incl. fi ne and coarse grinding / sanding wheel Ball bearing mounted shaft with zero play 4 rubber feet to ensure that the machine stands securely Adjustable work supports Safety hoods closed off at the sides Sturdy, compact design in metal Incl. fi ne and coarse grinding / sanding wheel Ball bearing mounted shaft with zero play 4 rubber feet to ensure that the machine stands securely Adjustable spark guard with large safety goggles Adjustable work supports Safety hoods closed off at the sides Sturdy, compact design in metal Coarse grinding disc 4 rubber feet to ensure that the machine stands securely 5.7 / 6.0 kg 0. / 0.8 kg.3 / 2.2 kg 7. / 8. kg 307 x 80 x 22 mm 360 x 260 x 260 mm 350 x 250 x 260 mm 400 x 340 x 200 mm Article number 44.25.50 Article number 44.26.04 Article number 44.28.06 Article number 44.66.3 4 0 0 6 8 2 5 5 4 8 2 4 0 0 6 8 2 5 5 4 0 2 6 0 4 0 0 6 8 2 5 5 4 0 2 7 7 4 0 0 6 8 2 5 5 4 5 6 4 28 Weight net / gross Packing dimensions Packaging unit
METAL LATHE BT-ML 300 DE: price/performance Very Good LATHE CHISEL KIT FOR BT-ML 300 LIVE LATHE CENTER FOR BT-ML 300 pieces HSS chisels Taper MK 2 Article number 45.050.20 Article number 45.050.24 370 W 0-00 min - 0-2500 min - l max 300 mm 4 0 0 6 8 2 5 5 5 6 6 8 4 0 0 6 8 2 5 5 5 6 6 9 8 max. Ø 70 mm max. Ø 70 mm Ø 25-70 mm Counter-clockwise / clockwise selector switch Internally and externally stepped clamp jaws Centering pin Different feed speeds Automatic feed Infi nitely adjustable speed control FOUR JAW CHUCK FOR BT-ML 300 FIXED STEADY FOR BT-ML 300 GRINDING BELT KIT FOR BT-US 240 37.0 / 43.0 kg 790 x 360 x 380 mm Ø 80 mm Max. Ø 30 mm 5 pieces Width / Length 50 x 686 mm Grit size 2 x 60 / 80 / x 00 K Article number 45.050.04 Article number 45.050.23 Article number 45.050.2 Article number 44.98.09 4 0 0 6 8 2 5 5 4 5 3 3 4 0 0 6 8 2 5 5 5 6 7 2 8 4 0 0 6 8 2 5 5 5 6 7 3 5 4 0 0 6 8 2 5 5 6 5 0 0 29
ELECTRIC HOIST ELECTRIC HOIST ELECTRIC HOIST ELECTRIC HOIST BT-EH 250 BT-EH 300 BT-EH 500 BT-EH 600 500 W S3 20% 0 min max. 5.7 m max. 250 kg max..5 m max. 25 kg 550 W S3 20% 0 min max. 5.7 m max. 300 kg max..5 m max. 50 kg 000 W S3 20% max. 5.7 m max. 500 kg max..5 m max. 250 kg 050 W S3 20% 0 min max. 5.7 m max. 600 kg max..5 m max. 300 kg Fastening with two bar clips Operator switch with emergency stop function Guide roller with load hook Motor with thermal switch Automatic load securing brake Load hook with safety catch Automatic limit cut-out for rolling out Fastening with two bar clips Operator switch with emergency stop function Guide roller with load hook Motor with thermal switch Automatic load securing brake Load hook with safety catch Automatic limit cut-out for rolling out Fastening with two bar clips Operator switch with emergency stop function Guide roller with load hook Motor with thermal switch Automatic load securing brake Load hook with safety catch Automatic limit cut-out for rolling out Fastening with two bar clips Operator switch with emergency stop function Guide roller with load hook Motor with thermal switch Automatic load securing brake Load hook with safety catch Automatic limit cut-out for rolling out 9.8 / 0.4 kg 2 9.6 /.3 kg 2 5. / 6.5 kg 2 7.5 / 8.3 kg 2 355 x 240 x 40 mm 355 x 230 x 45 mm 40 x 55 x 247 mm 400 x 50 x 255 mm Article number 22.55.7 Article number 22.553.3 Article number 22.555.30 Article number 22.557. 4 0 0 6 8 2 5 5 3 9 7 4 4 0 0 6 8 2 5 5 3 9 7 2 4 006825 58489 4 0 0 6 8 2 5 5 3 9 7 6 9 30 Weight net / gross Packing dimensions Packaging unit
ELECTRIC HOIST BT-EH 000 CHAIN HOIST BT-CH 000 SWING ARM GT-SA 200 FOR HOISTS Length 00 mm With reach of 750 mm max. load 600 kg With reach of 00 mm max. load 300 kg 4 Article number 22.553.98 600 W S3 25% 0 min max. 5.7 m max. 999 kg max..5 m max. 500 kg 000 kg 2.5 m 4 0 0 6 8 2 5 5 4 0 0 7 Fastening with two bar clips Operator switch with emergency stop function Guide roller with load hook Motor with thermal switch Automatic load securing brake Load hook with safety catch Automatic limit cut-out for rolling out Closed metal housing Load hook with safety catch Long operator chain Low design 29.8 / 33.3 kg 8.5 / 9.4 kg 570 x 255 x 340 mm 250 x 80 x 60 mm Article number 22.557.5 Article number 22.50.02 4 0 0 6 8 2 5 5 3 9 7 7 6 4 0 0 6 8 2 5 5 3 9 7 3 8 TOOL AND GEAR WAGGON PALLET TRUCK HAND TRUCK BT-TW 50 BT-PT 2500 BT-HT 00 DE: best tool 202 DE: price/performance Very Good kg kg Folded 700 x 480 x 65 mm kg max. 50 kg 4 x 45 mm 2 x 00 mm x 200 mm 685 mm (Width) 875 mm (Height) max. 2500 kg 85 mm / 200 mm Ø 80 mm Ø 80 mm Unfolded 985 x 480 x 420 mm max. 00 kg 460 mm (Depth) 50 mm 550 mm Strong sheet steel frame Non-slip work surface 7 ball-bearing drawers (fully extendable thanks to telescopic rails) 4 large easy-running wheels (of which 2 are steerable with locking brake) Lockable Selector lever for lift / neutral / lower Safety handle with loop grip Automatic return of the drawbar Ball-bearing and PU-coated steering wheels and double load-bearing rollers Steel frame Fully retractable rubber wheels Folding aluminium base plate Pull-out handle Rubber-coated handle Lock for extending handle 54.0 / 57.5 kg 730 x 800 x 505 mm 70.0 / 75.0 kg 200 x 560 x 740 mm 3.7 / 4.4 kg 4 700 x 480 x 65 mm Article number 45.0.50 Article number 20.225.25 Article number 22.60.3 4 0 0 6 8 2 5 5 6 4 3 6 4 0 0 6 8 2 5 5 6 3 2 2 4 0 0 6 8 2 5 5 6 4 0 8 2 3
32
LOG CUTTING SAW BT-LC 400/2 LOG CUTTING SAW BT-LC 700 / D LOG SPLITTER BT-LS 44 DE: price/performance Good Very Good DE: price/performance Good DE: rating Good Urteil Einhell BT-LS 44 GUT 83,0 % Holzspalter im Einzeltest 09/20 2200 W S6 40% = 2860 min - HW / TCT Ø 400 x Ø 30 mm 400 V 3 ~ 50 Hz 4500 W S6 20% = 440 min - CV Ø 700 x Ø 30 mm 500 W Ø 50-250 mm max. 370 mm HW / TCT Ø max. 25 mm t = 40 Carbide metal saw blade Carriage extension Carriage with hooks Length stop CV Ø max. 270 mm t = 64 Chrome vanadium sawblade Ergonomically shaped carriage with hook Including chassis Carriage reset by springs Electronic brake switch Phase converter in plug 4 t 30 mm 2.4 l Two-hand control Transport handle Stable foot High quality electric motor Overload release Sturdy wheels 33. / 39. kg 00 x 745 x 520 mm 87.0 / 52.9 kg 060 x 760 x 50 mm 36.0 / 38.7 kg 80 x 290 x 468 mm Article number 43.07.62 Article number 43.07.72 Article number 34.320.3 4 0 0 6 8 2 5 5 4 4 3 4 4 0 0 6 8 2 5 5 4 4 7 2 4 0 0 6 8 2 5 5 4 0 0 6 2 LOG SPLITTER BT-LS 65 U LOG SPLITTER BT-LS 60 B LOG SPLITTER BT-LS 80 DB 500 W Ø 50-250 mm max. 520 mm 2200 W Ø max. 50-320 mm max. 00-040 mm 400 V 3 ~ 50 Hz 3600 W Ø max. 50-400 mm 00-040 mm 5.5 t 390 mm 3.2 l 6 t 470 mm 3.8 l 8 t 480 mm 4 l Two-hand control Transport handle Base frame High quality electric motor Overload release Sturdy wheels Adjustable log holding plates Height-adjustable workbench Two-handed safety switch Emergency stop switch Adjustable splitting wedge height Transport handle and wheels Adjustable log holding plates Height-adjustable workbench Two-handed safety switch Emergency stop switch Adjustable splitting wedge height Transport handle and wheels 48.0 / 52.0 kg 83.0 / 97.6 kg 0.0 / 2.8 kg 090 x 330 x 565 mm 535 x 535 x 60 mm 560 x 560 x 40 mm Article number 34.32.60 Article number 34.320.45 Article number 34.320.65 4 0 0 6 8 2 5 5 5 4 5 2 6 4 0 0 6 8 2 5 5 7 6 8 5 6 4 0 0 6 8 2 5 5 7 6 8 6 3 Weight net / gross Packing dimensions Packaging unit 33
GENERATOR GENERATOR GENERATOR GENERATOR BT-PG 850/2 BT-PG 2000/2 BT-PG 2800/ BT-PG 300/ 650 W (max. 720 W).2 kw (.65 HP) 63 cm 3 4,2 l Mixture : 40 (2,5 %) 2 x 2000 W (max. 2200 W) 4.0 kw (5.4 HP) 96 cm 3 3 l Petrol 2 x 2300 W (max. 2800 W) 4. kw 5 l Petrol 208 cm 3 (5.6 HP) 2 x 2600 W (max. 300 W) 4. kw 5 l Petrol 208 cm 3 (5.6 HP) Powerful 2-stroke engine, air-cooled Synchronous generator Carry handle for easy transport Overload switch for appliance safety Automatic voltage controller (AVR) Reversing starter to start the machine 4-stroke engine Synchronous generator Voltmeter Tank indicator Large 3 liter tank for continuous operation Overload switch Low oil guard Crank shaft mounted at two ends Automatic voltage controller (AVR) 4-stroke engine Synchronous generator Practical voltmeter Tank indicator Large 5 liter tank for continuous operation Overload switch Low oil guard Crank shaft mounted at two ends Automatic voltage controller (AVR) 4-stroke engine Synchronous generator Practical voltmeter Tank indicator Large 5 liter tank for continuous operation Overload switch Low oil guard Crank shaft mounted at two ends Automatic voltage controller (AVR) 6.0 / 7.6 kg 36.9 / 40.0 kg 4.5 / 44.5 kg 42.4 / 45.5 kg 390 x 350 x 335 mm 620 x 470 x 480 mm 625 x 465 x 475 mm 625 x 465 x 475 mm Article number 4.52.45 Article number 4.524.20 Article number 4.524.80 Article number 4.524.60 4 006825 598452 4 006825 575590 4 006825 589399 4 006825 589368 34 Weight net / gross Packing dimensions Packaging unit
GENERATOR BT-PG 4000 GENERATOR BT-PG 5500/2 D GENERATOR BT-PG 5000 DD 2 x 3300 W (max. 3800 W) 4.89 kw / (6.7 HP) 24 l Petrol 400 V 3 ~ 50 Hz 2 x 3600 W 3000 W (max. 5500 W) (max. 3300 W) 7.0 kw (9.5 HP) 25 l 400 V 3 ~ 50 Hz 4200 W (max. 5000 W) 3000 W (max. 3300 W) x 2 V d.c. (max. 00 W) 6.3 kw (8.6 HP) Unleaded petrol 6 l Diesel PETROL AND OIL SUCTION PUMP 4-stroke engine Practical voltmeter Tank indicator Large 24 liter tank for continuous operation Overload switch Low oil guard Crank shaft mounted at two ends Automatic voltage controller (AVR) 4-stroke engine Synchronous generator Overload switch Low oil guard Crank shaft mounted at two ends Automatic voltage controller (AVR) 4-stroke digital inverter, air-cooled Inverter technology for voltage-sensitive equipment (computers, measuring devices) Voltage stability without fl uctuations Low oil guard Overload switch Automatic voltage controller (AVR) 64.0 / 68.0 kg 70 x 545 x 605 mm 76.0 kg 80. kg 70 x 560 x 590 mm 44.0 / 57.9 kg 950 x 580 x 840 mm Suction hose lenghth.3 m Volume.6 l max. Article number 4.524.40 Article number 4.525.00 Article number 4.523.95 Article number 34.070.00 4 0 0 6 8 2 5 5 8 0 0 5 4 006825 59376 4 0 0 6 8 2 5 5 8 5 9 3 4 0 0 6 8 2 5 5 4 7 2 7 6 Note: For safe handling of the products please refer to the instructions in the operating manual. 35
GB We re always here to help - and that s a promise! Is there anything you d like to ask us about our products? Would you like to order a part? Your product isn t working as it should? We re at your service! We ll get you some help - fast and without any fuss. isc GmbH, Eschenstr. 6, 94405 Landau/Isar, Deutschland +49 (0) 995 959 2000 (Landline charge 4 cent / min.) (Cell phone charge 42 cent / min.) +49 (0) 805 835 830 www isc-gmbh.info info @ isc-gmbh.info Einhell Germany AG Wiesenweg 22 94405 Landau/Isar Germany www.einhell.com info@einhell.com 204 Einhell Germany AG Subject to technical modifications and errors Art. no. 064 As of: December 203 WELL DONE.