Section 3 Custom Recessed
BX Connector 13.375" 11.375" Hanging Cable Typ (By others) Threaded Rod Typ (By others) 23.375" OAL Fixture Lamp Housing PAR30 Lamp Holder Ballast Compartment 6.781" 45 " 12.000" OC "T" Grid System See Detail A 12.000" 24.000" OC "T" Grid System Note: 1- Fixture ambient temperature not to exceed 100 F. 2- All exposed metal parts of Fixture to have a semi gloss white painted finish. Consult factory for alternate custom finishes and pricing. Lamp Housing "T" Grid System (By Other) 3- Fixture provided with semi-remote (nominal 36" apart) electronic Aromat Ballast(s) and is intended to use 70 watt (max) PAR30 Metal Halide Lamp (by others). Warning, Risk of Fire. Use recommended Lamp only. 4- Lamp Holder(s) are adjustable 45 from vertical, around 350, have approximately 2.000" vertical adjustment and accepts 3 optical accessories. Consult factory for available options. 0.188" Detail A Scale: 1:2 1.000" Isometric Vie w Scale: NTS 5- Fixture intended to be mounted via Threaded Rod (by others) or Hanging Cable (by others). Consult factory for any special mounting requirements required. Phone: (201) 438-9540 Contact: Rev By Notes Date Fixture Type: Drawing No: 5153-CUST Title: VersaLux Recessed with Drawn By: Scale: Two PAR30 MH and Spread Lens Check By: File: 5153-CUST Project: Section 3 Custom Recessed 1
BX Connector 13.375" 11.375" Hanging Cable Typ (By others) Threaded Rod Typ (By others) 47.375" OAL Fixture Lamp Housing PAR30 Lamp Holder Ballast Compartment 6.781" 12.000" OC "T" Grid System See Detail A 45 " 12.000" 48.000" OC "T" Grid System Note: 1- Fixture ambient temperature not to exceed 100 F. 2- All exposed metal parts of Fixture to have a semi gloss white painted finish. Consult factory for alternate custom finishes and pricing. Lamp Housing "T" Grid System (By Other) 3- Fixture provided with semi-remote (nominal 36" apart) electronic Aromat Ballast(s) and is intended to use 70 watt (max) PAR30 Metal Halide Lamp (by others). Warning, Risk of Fire. Use recommended Lamp only. 4- Lamp Holder(s) are adjustable 45 from vertical, around 350, have approximately 2.000" vertical adjustment and accepts 3 optical accessories. Consult factory for available options. 0.188" Detail A Scale: 1:2 1.000" Isometric View Scale: NTS 5- Fixture intended to be mounted via Threaded Rod (by others) or Hanging Cable (by others). Consult factory for any special mounting requirements required. Phone: (201) 438-9540 Contact: Rev By Notes Date Fixture Type: Drawing No: 5154-CUST Title: VersaLux Recessed with Drawn By: Scale: Four PAR30 MH and Spread Lens Check By: File: 5154-CUST Project: 2 Section 3 Custom Recessed
Section 3 Custom Recessed 3
Contact: Fixture Type: Drawing No: Drawn By: Check By: Rev By Notes Date Scale: File: 30081 30081 Title: Project: VersaLux Combo with MR16 & CF Lamp/Acrylic Diffuser 4 Section 3 Custom Recessed
6.000" 13.000" (Sq) Fixture Assembly Extracted Position for Realamping Philips QL Lamp Access Plate 11.000" Electronic Ballast Sectional Side View Scale: 1:8 Sectional Front View Scale: 1:8 Reflecting Pool Notes: 1- Fixture is UL Listed. 2- Fixture to be made from.060" thk. Ferralium 255 and is intended to used 120V Electronic Ballast, for 55W (max) Philips QL Lamp. Warning: Use recommend Lamp only 3- Fixture is intended to use a Clear Acrylic Lens. 6- This drawing depicts the Fixture Assembly in both the normal and retracted position. The Utility Compartment must be fully drained before fixture maintenance can be performed. Utility Comparment Fixture Compartment Normal Position 4- Fixture is intended to be mounted in a dry compartment. Access plate hardware and gasketing to be determined. Starfire to be informed as to any special mounting means that may be required. 5- Wireway into Fixture Assembly to be determined. 7- Minimum 8" Clearance required in Utility Compartment for removal of Fixture Assembly. 8- Sufficient gasketing is required around perimeter of access plate to maintain a dry fixture compartment. (By Others) Phone: (201) 438-9540 Partial Isometric View Scale: NTS Contact: Rev By Notes Date Fixture Type: Drawing No: 30099A Title: Reflecting Pool Fixture Drawn By: Scale: w/ql Lamp Check By: File: 30099 Project: Section 3 Custom Recessed 5
6 Section 3 Custom Recessed
Section 3 Custom Recessed 7
9.000" 8.156" 7.000" 7.500" J Box Mounting Bracket Running Thread (see note 6) Fixture Housing 8.625" Vent Hole PAR30 Lamp Holder 6.500" Trim Flange (see note 2) 6.156" Sq Apeture 7.906" Sq Celing (Ref) 6.156" 7.906" Notes: 1- Fixture is UL listed. Fixture ambient temperature not to exceed 100 F. GC to provide air circulation slot for heat management. 2-Finishes: Lamp Housing: Black. Trim Flange: white (WH). Consult factory for alternate finishes. 3-Fixture is Thermally Protected and is intended to use 70watt (max)par30 Lamp (byothers). Warning:Risk of Fire. Use recommend Lamp only. 4-Lamp Holders are adjusted 30 from vertical, around 350 horizontal and can accommodate up to 3 optical accessories. Consult factory for available options. 5-Fixture can accommodate from 0.5000" to 1.500" Ceiling thicknesses. Consult factory for special mounting requirements. Isometric View of Fixture Scale: NTS 6- Fixture is provided with Mounting Bracket to allow for Fixture to be mounted via Threaded Rods (by others). 7- Fixture weight approximately 7.5 Lbs. Phone: (201) 438-9540 Contact: Fixture Type: Drawing No: Drawn By: Check By: Rev By Notes Date Scale: File: 30146 30146 Title: Project: VersaLux Recessed Single Lamp with PAR30 Lamp 8 Section 3 Custom Recessed
Section 3 Custom Recessed 9
7 Donna Drive, Wood Ridge, NJ 07075 info@starfirelighting.com 10 Section 3 Custom Recessed
7 Donna Drive, Wood Ridge, NJ 07075 info@starfirelighting.com VersaLux Recessed with MR16/ Double Layer Spread Lens Section 3 Custom Recessed 11
7 Donna Drive, Wood Ridge, NJ 07075 info@starfirelighting.com VersaLux Recessed with MR16/Spread Lens 12 Section 3 Custom Recessed
Section 3 Custom Recessed 13
14 Section 3 Custom Recessed
Contact: Fixture Type: Drawing No: Drawn By: Check By: Rev By Notes Date Scale: File: 30465 30465 Title: Project: VersaLux Slot Fixture w/mr16 and T5 Fluorescent Lamps Section 3 Custom Recessed 15
Contact: Fixture Type: Drawing No: Drawn By: Check By: Rev By Notes Date Scale: File: 30465 30465 Title: Project: VersaLux Slot Fixture w/mr16 and T5 Fluorescent Lamps 16 Section 3 Custom Recessed
Section 3 Custom Recessed 17
18 Section 3 Custom Recessed
Section 3 Custom Recessed 19