Asphalt Distributors VT LeeBoy A company of VT Systems Maximizer 2B & 3B Maximizer 2B Features include: 12-foot (3.7 m) Fully Circulating Folding Spraybar Automatic In-Cab Controls Internal Spraybar Valves 400 gpm (1,514 lpm) Viking Asphalt Pump Enviro-Flush Clean Out System Spraybar Extension Options up to 24 feet Straight-Line Start and Stop Accurate Application from Start to Finish Stepped Tapered Spraying Maximizer 3B Features include: 8 to 16-foot (2.4 to 4.9 m) Fully Circulating Extending Spraybar Automatic In-Cab Controls Internal Spraybar Valves 400 gpm (1,514 lpm) Viking Asphalt Pump Enviro-Flush Clean Out System Spraybar Extension Options up to 20 feet Straight-Line Start and Stop Accurate Application from Start to Finish Seamless Tapered Spraying Designed with the Paving Professional in Mind.
Versatility Tack coating road surface in front of an asphalt paver. Tack coating road surface in front of a chip spreader. The extending spraybar of the Maximizer 3B allows seamless transitioning from 8 to 16 feet (2.4 to 4.9 m) spraying to handle intersections, obstructions, lane drops and more! The folding spraybar of the Maximizer 2B allows spraying up to 12 feet (3.7 m) without extensions. Both spraybars adjust to provide even coverage of triple overlap fan spray pattern.
Control The Viking asphalt pump Internal gear design is best suited to pump asphalt. Large displacement allows slower running while maintaining flow yielding longer life. Simple design with only 2 moving parts. Fully rebuildable Designed for long life Low shaft wear Low case wear Internal relief valve Plus-1 Controller Controls spraybar circulate and spray width on the move. Maintain set application rate regardless of changes in spraybar width or vehicle speed. Nozzles mounted on 4-inch (102 mm) centers allow triple spray fan pattern assuring uniform, accurate, and calibrated asphalt distribution. Enviro-Flush Fully automated clean-out cycle activated by the push of a button Activate Rear Controls Select Clean-Out Diesel or Clean-Out Enviro Progress may be monitored if desired. Recycled solvent is stored in the Enviro Flush tank
Specifications TANK CAPACITY TANK TYPE TANK MATERIAL INSULATION & JACKET BURNERS FLUSH TANK IN-CAB CONTROLS ASPHALT PUMP SPRAYBAR NOZZLES GROUND SPEED OTHER EQUIPMENT OPTIONAL EQUIPMENT Maximizer 2B & Maximizer 3B INCLUDES OVERAGE FOR EXPANSION 1000 gal (3,785 L) to 4000 gal (15,142 L) Elliptical shape Full cross section, 10 gauge steel (3.4 mm) surge plates with staggered openings Meets all applicable federal tank regulation for asphalt distributors Steel, 10 gauge (3.4 mm) shell Steel, 7 gauge (4.5 mm) reinforced and flanged heads All seams electrically welded inside and out 2 Inch (52 mm) thick with 0.05 inch (1 mm) weatherproof aluminum jacket Two diesel burners with electric ignition 560,000 BTU/hr each Optional LPG electronic control (ignition, outfire, and temperature limit) 25 Gallon (95 L) connected to asphalt pump for pump and piping clean out Enviro-Flush system for environmentally-friendly handling of cleaning solvent Plus-1 System controls all distributor functions from inside the cab Display includes readouts for pump gpm, truck fpm, application rate, distance traveled, gallons sprayed, tank contents temperature, speed calibration, spraybar width, hour meter, and total area sprayed (standard and metric units) 12 Presets for application rate and flow calibration Provides accurate application regardless of changes in speed or spraybar width Viking 4 Inch (102 mm) 400 gpm (1,514 lpm) capacity positive displacement Internal-gear pump Located at rear of unit with suction piping to tank sump Hydrostatic drive Front live power driven Fixed displacement hydraulic motor Controls in-cab and at rear fender provide manual control of pump speed & hydraulic functions 20 Gallon (76 L) hydraulic reservoir Optional PTO from transmission to drive distributor hydraulics 4 Inch (102 mm) nozzle spacing and individual shutoff valves for each nozzle All spray valves are mounted internally ensuring continuous heating and minimized clogging In-Cab control of spray nozzles & spraybar circulation Standard brass V-Jet, mounted on 4 Inch (102 mm) centers GPS to accurately measure speed and distance traveled Optional radar horn Transfer valve with quick coupler Rear bumper Back-up alarm Single nozzle hand spray wand with 25 foot (7.6 m) hose 4 Way heated mirror (on LeeBoy supplied chassis) Rubber or steel loading hose Washdown system 2 or 3 Nozzle hand spray wand
Buyer s Guide Maximizer 2B Maximizer 3B 12 ft (3.7 m) Maximum width folding spraybar 16 ft (4.9 m) maximum width extending spraybar In-Cab & Rear controls for folding the spraybar In-Cab & Rear controls of extending the spraybar In-Cab & Rear controls of spraybar lift & shift 18 in In-Cab & Rear controls of spraybar lift & extend (457 mm) shift Switched control of spraybar on/off in 12 in (305 mm) increments N/A Fully circulating spraybar Two-Way breakaway feature at midpoint of spraybar Bolt-On extension up to 24 ft (7.3 m) wide Switched control of spraybar on/off in 12 in (305 mm) increments Automatic on/off as spraybar is extended/retracted in 4 in (102 mm) increments Fully circulating spraybar Two-Way breakaway feature at both ends of the spraybar 12 in (305 mm) from ends Bolt-On extension up to 20 ft (6.1 m) wide We cover it all: Highway to Commercial, City to Country, Wide Open Spaces to Confined Areas, Automated to Manual Operation. Change functions with finger tip control. Quick setup and easy to operate. Airport runways Residential Parking lots Province roadways
Infinitely Variable Width Spraybar Spray widths up to 20 (6.1 m) Maximizer 3B Controls from inside cab or at the rear fender Easy to read gauges Maximizer 3B breakaway Maximizer 2B breakaway Custom applications and stationary work Clean Starts: Start, stop and restart material flow with a clean line Maximizer 3B staggered bar is synchronized to start and stop cleanly.
10 Gauge steel tank 2 (51 mm) Thick Rockwool.050 (1.3 mm) Aluminum Shell insulation Our 10 gauge steel construction provides the strong foundation of our tank. The 2 (51 mm) thick Rockwool insulation helps contain the heat, conserving energy. The.050 thick aluminum shell provides an attractive appearance facilitating easy maintenance and a smooth surface to advertise your business. Infinitely adjustable spraybar widths, adjustable while paving to avoid obstacles such as bridge crossings. Tanks sizes available: 1,000 gal (3,785 L) 1,500 gal (5,678 L) 1,900 gal (7,192 L) 3,000 gal (11,356 L) 3,500 gal (13,249 L) 4,000 gal (15,142 L) Our proprietary spraying algorithms allow precise spraying no matter what speed or spray width you set. GPS or radar technology is used to precisely measure speed. Just set your application rate and drive. The computer does the rest. The right amount of asphalt is metered every time. This produces the best results while minimizing product waste.
Configurations Configuration Checklist Maximizer 2B Maximizer 3B 1000 to 4000 gallon (3,785 to 15,142 L) Capacity Tank 400 gpm (1,514 lpm) Viking Asphalt Pump 8 to 16 ft (2.4 to 4.9 m) EZ-Spray Extendible Fully Circulating Spraybar 12 ft (3.7 m) EZ-Spray Folding Fully Circulating Spraybar Plus-1 In-Cab Controller 8 in (203 mm) Diameter Hi-Lo Double Heating Flues Diesel-Fired Burner with Heat Limit Control 5 in (127 mm) Dial Thermometer and Armored Pencil Thermometer 1 in (25 mm) Sampling Valve Front and Rear Dial Contents Gauges Single Nozzle Handspray Wand Meets Federal DOT Hot Asphalt Regulations Enviro-Flush Clean-Out System Manual Spraybar Lock Assembly In-Cab Control of Spraybar in 1-foot Increments In-Cab and Fender Control Folding Spraybar LPG Burner in lieu of Diesel Burner (52-gallon LPG Tank) Optional Optional Wash Down System for Spraybar Cleaning Optional Optional Bolt-On Extensions up to 24 ft (7.3 m) Optional Bolt-On Extensions up to 20 ft (6.1 m) Optional Viking Jacketed Asphalt Pump Optional Optional LeeBoy makes constant improvements to all of its products and reserves the right to change specifications without notice. Photos and illustrations may show standard and /or optional equipment. Maximizer 2B & 3B, EX Other Members of the LeeBoy Family of Products 500T Tack Tank RMT 1000 Distributor Tru-Pac 915 Roller www..com "LeeBoy is dedicated to providing top quality parts and service support on every unit sold." VT LeeBoy, Inc. 500 Lincoln County Parkway Ext. Lincolnton, North Carolina 28092 www.leeboy.com 704.966.3300