Mil-Spec ackshells and onnector ccessories U n i t e d S t a t e s U n i t e d K i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n
n Important Notice for ll uyers of Military Standard ylindrical onnector ackshells S erospace has assumed control of the M85049 specifi - cation for cylindrical connector backshells and accessories. ll existing M85049 specifi cation documents are now supersceded by the new S85049 standard. or convenience in ordering however, basic part numbering for these components will still utilize the familiar M85049 prefi x. In other words, only the ID of the controlling specifi cation documentation will convert to S nomenclature; individual slash sheet part numbers will maintain their original M85049 order numbers. In addition to the above change, several new specifi cation slash sheets have been added to the S85049 family of cylindrical backshells for Mil-Spec connectors. lenair will supply the following new products just as soon as the formal S qualifi cation process is completed. S85049/03 S85049/04 S85049/05 S85049/09 S85049/ S85049/2 S85049/4 S85049/5 S85049/7 S85049/8 S85049/ S85049/2 S85049/23 S85049/ S85049/26 S85049/27 S85049/2 S85049/30 S85049/3 S85049/ S85049/33 Straight, omposite, Strain-Relief MI/RI ackshell 45, omposite, Strain-Relief MI/RI ackshell 90, omposite, Strain-Relief MI/RI ackshell Straight, MI/RI Shield Sock S85049 ig. 4 90, MI/RI Shield Sock S85049 ig. 4 Straight, MI/RI Shield Sock S85049 ig. 2 90, MI/RI Shield Sock S85049 ig. 2 Straight, MI/RI Shield Sock S85049 ig. 3 90, MI/RI Shield Sock S85049 ig. 3 Straight, Strain-Relief, ull-radius ntry S85049 ig. 4 90, Strain-Relief, ull-radius ntry S85049 ig. 4 Straight, Strain-Relief, ull-radius ntry S85049 ig. 2 90, Strain-Relief, ull-radius ntry S85049 ig. 2 Straight, Strain-Relief, ull-radius ntry S85049 ig. 3 90, Strain-Relief, ull-radius ntry S85049 ig. 3 ushing Strip for S85049 lamps and, Shield Termination Square lange asket Straight, iber Optic ackshell for S5590/ onnector 45, iber Optic ackshell for S5590/ onnector 90, iber Optic ackshell for S5590/ onnector
Military Standard ackshells and onnector ccessories Potting oot Rings nvironmental ackshells rimp Rings and anding ackshells Dummy Stowage Receptacles Section 30 Section 37 Section 44 Section 65 Shrink oot dapters MI/RI Non- nvironmental ackshells Qwik-Ty Strain Reliefs Protective overs Section 45 Section 3 Section 38 Rectangular ackshells Section 66 dapters and xtenders MI/RI nvironmental ackshells Section 50 Tools Miscellaneous ccessories Section Section 60 Non- nvironmental Strain Relief ackshells Section 39 T Rings and T Ring ackshells Nuts Section 6 Strain Reliefs Section 68 onduit and onduit ccessories Section Section 40 Section 62 Section 7 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992
eneral Information Table of ontents Table of ontents Page Product Selection uide 3 Quick Page Reference by Part Number 7 Standard Materials and Notes 8 Recommended Torque Values 9 Military Standard onnector Index 0 Section 30 Potting oot Rings 30- Section 3 Shrink oot dapters 3- Section dapters/xtenders - Section Non-nvironmental Strain Relief ackshells - Section 37 nvironmental ackshells 37- Section 38 MI/RI Non-nvironmental ackshells 38- Section 39 MI/RI nvironmental ackshells 39- Section 40 T Rings and T Ring ackshells 40- Section 44 rimp Ring and anding ackshells 44- Section 45 Qwik-Ty Strain Reliefs 45- Section 50 Rectangular ackshells 50- Section 60 Tools 60- Section 6 "" Nuts 6- Section 62 Strain Reliefs 62- Section 65 Dummy Stowage Receptacles 65- Section 66 Protective overs 66- Section 68 Miscellaneous ccessories (Jam Nuts, Potting oots, ushings, iber Optic Terminus) 68- Section 7 onduit/onvoluted Tubing and Related dapters and ittings 7- ppendix Part Number Index - 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 2
Military Standard onnector ccessories Product Selection uide eneral Information The following product type descriptions are provided as an aid in selecting the proper accessory for each functional requirement. Please use the part number index to find the catalog page for a specific Mil-Spec accessory slash number. Section 30 - Potting oot Rings Potting oot Rings are designed for use with M85049/74 and /75 potting boots. The plastic potting boots snap in place to provide an easy and convenient receptacle for cable sealing potting material. Section 3 - Shrink oot dapters The adapters in this section are designed to accommodate lipped-type heat shrinkable boots, which are used for both mechanical strain relief and a degree of environmental protection. Section - dapters/xtenders Simple straight backshells which provide for thread adaptions or extensions behind the connector. Section - Non-nvironmental Strain Relief ackshells Straight backshells are combined with a variety of strain reliefs to provide cable to connector protection in situations where environmental sealing is not required. Section 37 - nvironmental ackshells lenair nvironmental ackshells offer excellent immersion capability when used with impervious jacketed cables. resilient grommet which fits into a counterbore in the backshell compresses and seals against the cable jacket when the strain relief is tightened. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3
eneral Information Military Standard onnector ccessories Product Selection uide Section 38 - MI/RI Non-nvironmental ackshells choice of 0 shield/screen terminations are offered in straight and angled backshells, and include designs to accommodate combinations of individual or overall shields or screens. ll designs included in this section provide low dc resistance across the termination area. Section 39 - MI/RI nvironmental ackshells The backshells described in this section have MI/RI shield/screen terminations with cable sealing or environmental resisting features. Straight and angled designs are available. Section 40 - T Rings and T Ring ackshells lenair's T Ring backshells offer a unique and reliable method of terminating individually shielded wires where the shields are to be grounded through the backshell and connector shell. No special tools are required for assembly and full maintainability is provided. Section 44 - rimp Ring and anding ackshells anding and crimp ring backshells provide an economical approach to terminating overall cable and harness shields/ screens. These backshells utilize standard bands or crimp rings for full 0 shield/screen termination with the lowest dc resistance available. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 4
Military Standard onnector ccessories Product Selection uide eneral Information Section 45 - Qwik-Ty Strain Reliefs lenair's Qwik-Ty strain reliefs offer a unique method of providing strain relief to open wire bundles used with circular connectors. The Qwik-Ty provides a low profile, reduced weight and simple installation. Installation is quick and secure, using either plastic tie straps or lacing tape. Section 50 - Rectangular ackshells lenair's selection of rectangular backshells provide strain relief and environmental protection for rack and panel style connectors. Section 60 - Tools Mil-Spec onnector wrenches, plug and receptacle holders and accessories are required for expert assembly of interconnect systems. lenair manufacturers a wide range of connector wrenches and other assembly tools. ontact lenair or your local sales representative for a copy of the lenair ackshell ssembly Tools, anding Tools and ccessories catalog. Section 6 - "" Nuts This section describes the various backshells without strain relief for use with circular connectors. (These are most commonly referred to as "" Nuts.) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 5
eneral Information Military Standard onnector ccessories Product Selection uide Section 62 - Strain Reliefs lenair offers a comprehensive selection of strain reliefs for circular connectors. Straight and angular versions are offered for most connector series. Section 65 - Dummy Stowage Receptacles choice of dummy stowage receptacles is offered for most circular bayonet coupled and threaded coupled connectors. Section 66 - Protective overs wide selection of protective covers are offered for almost all bayonet or threaded coupled circular connectors. lenair's proprietary versions (as shown in lenair s ircular onnector ccessories catalog) offer a broad choice of attachments not provided on the Military Standard versions. MI/RI protective covers are offered for most bayonet coupled receptacle connectors. Section 68 - Miscellaneous ccessories an't find it anywhere else? Try this selection of miscellaneous connector accessories. Included in this section are Jam Nuts, Potting oots, askets, ushings, and iber Optic Terminus. Section 7 - onduit and onduit ccessories lenair's M758 Series conduit and associated fittings have been tested and qualified in accordance with MIL-- 758 (SH). lenair's M758 products are designed to shield cables from electromagnetic radiation, electromagnetic pulse, and to provide weatherproofing. lenair's M758 Series products offer the highest level of performance and quality while providing a field-installable and cost-effective conduit system. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6
Quick Page Reference by Part Number ( more detailed index of Mil-Spec part numbers is located at the end of this catalog) eneral Information Part Number Page P00 7-4 RP00 7-4 MS3057 62-3 MS3057 62-9 MS3057 62-0 MS3057D 62-4 MS305 65-2 MS35 65-3 MS352 45-4* MS353 45-4* MS354 45-4* MS358 3-4 MS380 66-2 MS38 66-2 MS384-3* MS386 68-2 MS388 39-0 MS388 37- MS388 38-8 MS389 39-8 MS389 37- MS389 38-6 MS345 62-5* MS346 6-7 MS346 3-5 MS347 62- MS348 62- MS349 44-3 MS34 68-4 MS3437 39-2 MS3437 37- MS3437 38-0 MS3480 60-2 MS348 60-3 MS3482 60-4 MS7349 66-3 MS7350 66-3 MS047 66-5* MS048 66-5* M758/ 7-2 M758/2 7-3 M758/3 7-4 M758/4 7-5 M758/5 7-6 M758/6 7-7 M758/7 7-8 M758/8 7- M758/9 7-2 M758/0 7-4 M758/ 7-6 M758/2 7-8 M758/3 7- M758/4 7- M758/5 7- M758/6 7-26 M758/7 7- M758/8 7-29 M758/9 7-30 MS25042 66-4 MS25043 66-4 MS2729 62-2 MS27292 66-0 Part Number Page MS27293 66- MS27294 66-0 MS27295 66- MS27296 65- MS27297 65- MS27342-2 62-9* MS27352 66-6* MS27353 66-6* MS27485 30-2* MS2750 66-5 MS27502 66-5 MS27506 62-9* MS27507 62-8 MS2750 66-6 MS275 66-6 MS2752 68-2* MS2754 68-2* MS27558 62-3 MS27559 62-4 MS27668 45-5* MS27669 45-5* MS27670 45-5* MS2774 40-2 M840/ 62-5 M840/2 62-6 M840/3 62-7 M840/4 7-3 M840/5 7- M840/6 39-2 M840/6 37-2 M840/7 65-4 M840/8 39-3 M840/8 37-3 M840/9 39-4 M840/9 37-4 M840/3 66-7 M840/5 66-7 M840/ 7-35 M840/23 6-2 M840/ 68-5 M840/25 7- M840/27 7-38 M840/30 7-40 M29504/04 68-6 M29504/05 68-7 M38999/ 6-6* M38999/2 3-6* M38999/3 44-4* M38999/4 40-3* M38999/5 39-6* M38999/6-5* M38999/7 38-4* M38999/8 38-5* M38999/9 65-5 M38999/0 65-6 D38999/ 65-7 D38999/ 68-8 D38999/ 66-8 D38999/33 66-8 D38999/50 65-8 M85/3 62-8 M85/4 39-6 Part Number Page M85/4 D 38-2 M85/6 6-3 M85/7 66-9 M85/8 66-9 M85/9 65-9 M85/29 66-9 M85/30 65-0 M83538/9-2 M83723/5 62- M83723/5N 6-7 M83723/5S 62- M83723/6M 3-5* M83723/27M 3-2 M83723/35-2 M83723/35N 6-4 M83723/35S -3 M83723/44 66-2* M83723/45 65-3* M83723/46 66-2* M83723/50 45-2 M83723/59-66-0 M83723/59-2 66- M83723/60-66-0 M83723/60-2 66- M83723/6 65- M83723/70 68-9 M83733/5 50-2 M83733/6 50-3 M85049/ 62-9 M85049/2 62-0 M85049/3 37-5 M85049/3 2 37-6 M85049/3 3 37-7 M85049/4 37-8 M85049/4 2 37-0 M85049/4 3 37-2 M85049/5 37-4 M85049/5 2 37-6 M85049/5 3 37-8 M85049/6 39-8 M85049/7 37- M85049/8 39-0 M85049/9 37- M85049/0 39-2 M85049/ 37- M85049/4S 6-5 M85049/5 45-3 M85049/6 45-3 M85049/7 39-6 M85049/8 39-7 M85049/9 38-5 M85049/ 44-2 M85049/2-4 M85049/23 38-6 M85049/ 38-8 M85049/25 38-0 M85049/26 44-3 M85049/27 6-6 M85049/ 50-2 M85049/29-5 M85049/30 40-3 M85049/3 6-7 Part Number Page M85049/- 68-0 M85049/-2 68- M85049/33-68-2 M85049/33-2 44-4 M85049/34-3 M85049/ 38-4 M85049/37 38-5 M85049/38 62- M85049/39 62-2 M85049/4 62-3 M85049/42 62-4 M85049/43 62-5 M85049/44 50-3 M85049/45 62-6 M85049/46 62-7 M85049/47 62-8 M85049/48-50-4 M85049/48-2 50-5 M85049/48-3 50-6 M85049/49-2 62-9 M85049/50 50-7 M85049/5 62- M85049/52 62- M85049/53 45-4 M85049/54 45-4 M85049/55 45-4 M85049/56 45-5 M85049/57 45-5 M85049/58 30-2 M85049/59 3-3 M85049/60-3-4 M85049/60-2 3-5 M85049/6 30-3 M85049/62 3-6 M85049/63 45-5 M85049/69 3-7 M85049/74 68-3 M85049/75 68-4 M85049/76 39-8 M85049/77 39-9 M85049/78 39- M85049/79 39-2 M85049/82 44-5 M85049/83 44-5 M85049/84 44-5 M85049/85 44-6 M85049/86 44-6 M85049/87 44-6 M85049/88 44-8 M85049/89 44-8 M85049/90 44-8 M85049/9 62- M85049/92 62- M85049/93 68-5 M85049/94 68-6 M85049/95 68-7 M85049/96 68-8 M855/ 68-9 M855/2 68- M855/3 68-8 MS90563 66-2 MS90564 66-2 * Page Number of Superceeding Part Number 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7
eneral Information Standard Materials and Notes The following standard materials are used for the majority of lenair backshells and connector accessories. However, backshell components are not limited to those items listed, but are representative of the elements used in lenair's general accessory products. ontact lenair for applicable specifications on items not listed below. OMPONNT Machined components: such as backshell bodies, fabricated elbows, protective covers, rotatable couplers, dummy stowage receptacles, lock nuts, -spring support rings, MI ground rings, grommet followers, etc. Die cast components: such as angular backshells, strain relief backshells, strain relief bodies, strain relief saddles, special MI ground rings, etc. ackshells or strain reliefs: available in optional corrosion resisting steel; and hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. lastomeric seals: such as O-rings, cable jacket seals, grommets, etc. nti-friction and thrust washers nti-rotation devices STNDRD MTRILS - KSHLLS ND SSORIS MTRIL luminum luminum orrosion Resisting Steel Silicone Teflon orrosion Resistant Material SPIITION MS-QQ--0, 5, STM2,, 9 QQ--59 STMS, 85, 26 STM582 (300 Series) MS-QQ-S-763 ZZ-R-765, MIL-R-25988 T N/ Note: very effort has been made to present accurate information in this catalog. ditorial errors which are brought to our attention will be corrected in future editions. ll dimensions presented in this catalog should be confirmed by the factory prior to inclusion within designs or specifications. We are constantly incorporating product improvements, and therefore lenair reserves the right to make changes without notice. ny liability or warranty as to quality, performance or fitness for use of lenair products is always based on the condition that they apply to only new unused products that are properly stored, handled, installed, used, maintained and inspected by the user in a manner appropriate for the intended use of the product. Tolerances On all length callouts, tolerance is ±.060 unless otherwise specified. Unless otherwise specified, the following other dimensional tolerances will apply:.xx = ±.03 (0.8).xxx = ±.05 (0.4) Lengths = ±.060 (.52) ngles = ± 5 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 8
Recommended Torque Values eneral Information INSTLLTION TORQU VLUS OR IRULR LTRIL ONNTOR SSORIS ccessory Thread Torque: ±5 inch pounds roup roup 2 Light & Medium Duty Heavy Duty MIL--505 (MS300 Series) MIL--505 (MS3400 Series) MIL--26482 Series I MIL--992 MIL--26500 MIL--26482 Series II MIL--27599 MIL--840 MIL--38999 Series I, II MIL--38999 Series III, IV MIL--85 Series I, II, III, IV MIL--8703 Series III s MIL--8703 Series I MIL--83723 Series I, II, III 8, 9, 35 56 3, 0, 0SL,, 35 76 7, 2, 2S, 3, 40 08 4, 4S, 5, D 40 6 6, 6S, 7, 40 6 8, 9, 27, 40 6, 2, 37, 80, 23, H 80, 25, 6, J 80, 29 48, 33 48 48 40 70 64 44 70 64 48 70 64 Notes:. roup values based on 80% of MIL--85049 light duty thread strength. 2. Use roup values for all composite connector accessories when tightened with lenair 600-09 and 600-007 Torque Tools. onsult factory. TORQU VLUS OR L LMP SRWS Torque Requirements in Inch-Pounds for orrosion-resistant Steel Screws Only Screw Recommended Torque* 2-56 2.0 4-40 4.0 6-6.0 8-8.0 0-0.0.250-5.0 *Recommended 75-80% of max values for installation into aluminum or composite materials. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 9 00 eneral Info.p65 9 /4/07, 2:48 PM
eneral Information Military Standard onnector Index The following is a listing of circular connectors defined by US Military Specifications, cross-referenced to the applicable active or inactive part number series. The symbols in the onnector Designator column are an essential element in lenair s commercial backshell part number developments. PRT NO. ONN. SPIITION SRIS DSRIPTION DSI. MS300 MIL--505 MS300 Receptacle, Wall Mtg (Solder) MS30 MIL--505 MS300 Receptacle MS302 ** MIL--505 MS300 Receptacle, ox Mtg (Solder) MS303 ** MIL--505 MS300 Receptacle, Potting (Solder) MS305 ** MIL--505 MS300 Dummy Receptacle MS306 MIL--505 MS300 Plug, Straight (Solder) MS307 MIL--505 MS300 Plug, Quick Disconnect (Solder) MS308 MIL--505 MS300 Plug, 90 (Solder) MS30 D-729 MIL--26482 Receptacle, Wall Mtg MS3 D MIL--26482 Plug, able onnecting MS ** MIL--26482 Receptacle, ox Mtg MS33 ** MIL--26482 Receptacle, Solder Mtg MS34 D-77 MIL--26482 Receptacle, Jam Nut MS35 ** MIL--26482-2 Dummy Receptacle MS D MIL--26482 Plug, Straight MS39 ** MIL--26482 Receptacle, Thru-ulkhead MS3 D MIL--26482 Receptacle, Wall Mtg, (rimp) MS D MIL--26482 Plug, Straight (rimp) MS3 ** MIL--26482 Receptacle, ox Mtg, (rimp) MS3 D-77 MIL--26482 Receptacle, Rear Mtg, Jam Nut (rimp) MS6 D MIL--26482 Plug, Straight (rimp) MS7 ** MIL--26482 Receptacle, ox Mtg (rimp) MS3 * MIL--26482 Receptacle, Wall Mtg (rimp) MS330 * MIL--8703 Receptacle, Push Pull, Wide lange MS3 X-706 MIL--8703 Receptacle, Push Pull, ox Mtg MS334 X-706 MIL--8703 Receptacle, Push Pull, Jam Nut MS335 ** MIL--8703 Dummy Receptacle MS337 X-706 MIL--8703 Plug, Straight, Push Pull MS338 X-706 MIL--8703 Plug, Lanyard, Push Pull MS339 ** MIL--8703 Receptacle, Thru-ulkhead MS340 X-706 MIL--8703 2 Receptacle, Push Pull, Wall Mtg MS342 ** MIL--505 MS300 Receptacle, Hermetic, ox Mtg MS343 ** MIL--505 MS300 Receptacle, Hermetic, Solder Mtg MS344 X-706 MIL--8703 2 Receptacle, Push Pull, Jam Nut MS345 ** MIL--8703 3 Receptacle, Hermetic, Push Pull, ox Mtg MS346 ** MIL--8703 3 Receptacle, Push Pull, Hermetic, Solder Mtg MS347 X-706 MIL--8703 2 Plug, Push Pull (rimp) MS348 X-706 MIL--8703 2 Plug, Push Pull, Lanyard (rimp) MS349 ** MIL--8703 3 Receptacle, Push Pull, Hermetic * onsult factory ** onnector does not accommodate rear accessories 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 0
Military Standard onnector Index eneral Information PRT NO. ONN. SPIITION SRIS DSRIPTION DSI. MS3400 MIL--505 MS3400 Receptacle, Wall Mtg MS340 MIL--505 MS3400 Receptacle, able onnecting MS3402 ** MIL--505 MS3400 Receptacle,,ox Mtg MS3404 MIL--505 MS3400 Receptacle, Jam Nut MS3406 MIL--505 MS3400 Plug MS3408 MIL--505 MS3400 Plug, 90 MS3409 MIL--505 MS3400 Plug, 45 MS342 MIL--505 MS3400 Receptacle, Wall Mtg MS34 MIL--8703 3 Receptacle, Push Pull, Wall Mtg MS3440 ** MIL--26482 2 Receptacle, Narrow lange Mtg (was M83723/9/0) MS3442 ** MIL--26482 2 Receptacle, Wide lange Mtg MS3443 ** MIL--26482 2 Receptacle, Solder lange Mtg MS3445 * MIL--8703 2 Plug, Push Pull, Rack & Panel Mtg MS3446 MIL--8703 3 Plug, Rack & Panel MS3449 ** MIL--26482 2 Receptacle, Single Hole Mtg MS3450 MIL--505 MS3450 Receptacle, Wall Mtg (was M83723/9/) MS345 MIL--505 MS3450 Receptacle, able onnecting (was M83723/7/8) MS3452 ** MIL--505 MS3450 Receptacle, ox Mtg (was M83723/2/) MS3454 MIL--505 MS3450 Receptacle, Jam Nut MS3456 MIL--505 MS3450 Plug, Straight (was M83723/23/) MS3459 MIL--505 MS3450 Plug, Straight, Self Locking (was M83723/52/53) MS3463 ** MIL--8703 3 Receptacle, Push Pull MS3464 MIL--8703 3 Receptacle, Push Pull, Jam Nut MS3466 ** MIL--8703 3 Receptacle, Push Pull, Hermetic MS3467 MIL--8703 3 Plug, Push Pull MS3468 MIL--8703 3 Plug, Push Pull, Lanyard MS3469 ** MIL--8703 3 Receptacle, Push Pull, Hermetic, Jam Nut MS3470 MIL--26482 2 Receptacle, Narrow lange Mtg (was M83723//2) MS347 MIL--26482 2 Receptacle, able onnecting (was M83723/7/8) MS3472 MIL--26482 2 Receptacle, Wide lange Mtg (was M83723/3/4) MS3473 ** MIL--26482 2 Receptacle, Solder Mtg, Hermetic MS3474 MIL--26482 2 Receptacle, Rear Mtg, Jam Nut (was M83723/5/6) MS3475 MIL--26482 2 Plug, RI Shielded (was M83723/42/43) MS3476 MIL--26482 2 Plug, Straight (was M83723/3/4) MS3477 ** MIL--26482 2 Receptacle Hermetic, ox Mtg MS3479 ** MIL--26482 2 Receptacle, Hermetic, Rear Mtg, Jam Nut MS7343 MIL--992 R Receptacle, Wall Mtg MS7344 MIL--992 R Plug, Straight MS7345 MIL--992 R Plug, able onnecting MS7346 MIL--992 R Receptacle, ox Mtg MS7347 MIL--992 R Receptacle, Jam Nut MS7348 MIL--992 R Receptacle, Jam Nut, ox Mtg MS8062 ** MIL--992 R Dummy Receptacle MS026 * MIL--27599 Receptacle, Wall Mtg, Solder MS027 * MIL--27599 Receptacle, Line MS0 * MIL--27599 Plug, Straight MS029 ** MIL--27599 Receptacle, Jam Nut Mtg * onsult factory; ** onnector does not accommodate rear accessories 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992
eneral Information Military Standard onnector Index PRT NO. ONN. SPIITION SRIS DSRIPTION DSI. MS030 * MIL--27599 Receptacle, ox Mtg, Hermetic MS03 ** MIL--27599 Receptacle, Jam Nut, Hermetic MS0 ** MIL--27599 Receptacle, Solder Mtg, Hermetic MS034 * MIL--27599 Receptacle, Wall Mtg MS035 * MIL--27599 Receptacle, ox Mtg MS264 MIL--26500, & R Receptacle, lange Mtg MS265 MIL--26500, & R Receptacle, Single Hole Mtg MS266 MIL--26500, & R Plug, Straight MS2583 ** MIL--505 MS300 Plug, Potting Seal MS27034 ** MIL--26500 Receptacle, Hermetic, Solder Mtg MS27334 * MIL--27599 Receptacle, Wall Mtg MS27335 ** MIL--27599 Receptacle, ox Mtg MS273 * MIL--27599 Plug, Straight MS27337 * MIL--27599 Receptacle, Jam Nut MS27338 * MIL--27599 Receptacle, Wall Mtg, Hermetic MS27339 ** MIL--27599 Receptacle, ox Mtg, Hermetic MS27340 ** MIL--27599 Receptacle, Jam Nut Mtg, Hermetic MS2734 ** MIL--27599 Receptacle, Solder Mtg, Hermetic MS27466 MIL--38999 I Receptacle, Wall Mtg MS27467 MIL--38999 I Plug, Straight MS27468 MIL--38999 I Receptacle, Jam Nut MS27469 ** MIL--38999 I Receptacle, Wall Mtg, Hermetic MS27470 ** MIL--38999 I Receptacle, Jam Nut, Hermetic MS2747 ** MIL--38999 I Receptacle, Solder Mtg, Hermetic MS27472 MIL--38999 II Receptacle, Wall Mtg MS27473 MIL--38999 II Plug, Straight MS27474 MIL--38999 II Receptacle, Jam Nut MS27475 MIL--38999 II Receptacle, Wall Mtg MS27476 ** MIL--38999 II Receptacle, ox Mtg, Hermetic MS27477 ** MIL--38999 II Receptacle, Jam Nut, Hermetic MS27478 ** MIL--38999 II Receptacle, Solder Mtg, Hermetic MS27479 MIL--38999 II Inactive Use MS27472 MS27480 MIL--38999 II Inactive Use MS27473 MS2748 MIL--38999 II Inactive Use MS27474 MS27482 MIL--38999 II Inactive Use MS27475 MS27483 ** MIL--38999 II Inactive Use MS27477 MS27484P ** MIL--38999 II Plug, Straight MS27484T MIL--38999 II Plug, Straight MS27496 ** MIL--38999 I Receptacle, ox Mtg MS27497 MIL--38999 II Receptacle, ack Panel Wall Mtg MS27498 MIL--38999 I Plug, 90 MS27499 ** MIL--38999 II Receptacle, ox Mtg MS27500 MIL--38999 II Inactive See MS27473 MS27503 ** MIL--38999 II Inactive See MS27478 MS27504 ** MIL--38999 II Inactive See MS27499 MS27505 ** MIL--38999 I Receptacle, ack Panel ox Mtg MS27508 ** MIL--38999 II Receptacle, ack Panel ox Mtg * onsult factory; ** onnector does not accommodate rear accessories 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 2
Military Standard onnector Index eneral Information PRT NO. ONN. SPIITION SRIS DSRIPTION DSI. MS2753 ** MIL--38999 II Receptacle, ox Mtg MS2755 MIL--38999 I Inactive Use MS27656 MS2763-70 MIL--26500K Receptacle, Panel Mtg MS2764-70 MIL--26500K Receptacle, D-Hole Mtg MS2765-70 MIL--26500K Plug, Straight MS27652 MIL--38999 I Inactive Use MS27466 MS27653 MIL--38999 I Inactive Use MS27467 MS27654 MIL--38999 I Inactive Use MS27656 MS27656 MIL--38999 I Receptacle, ack Panel, Wall Mtg MS2766-752 MIL--38999 I Plug, Lanyard Release MS27662 ** MIL--38999 I Receptacle, Thru-ulkhead MS27664 ** MIL--38999 II Receptacle, ack-panel Wall Mtg MS27665 MIL--38999 I Plug, Rack & Panel Mtg MS27667 ** MIL--38999 II Receptacle, Thru-ulkhead MS90555 * MIL--992 L Receptacle, Wall Mtg MS90556 * MIL--992 L Plug, Straight MS90557 * MIL--992 L Plug, able onnecting MS90558 * MIL--992 L Receptacle, W/oupling Ring, Wall Mtg M840/0 MIL--840 Receptacle, Wall Mtg M840/ MIL--840 Receptacle, able onnecting M840/2 ** MIL--840 Receptacle, ox Mtg M840/4 MIL--840 Receptacle, Jam Nut M840/6 MIL--840 Plug, Straight D38999/ H MIL--38999 III Receptacle, Wall Mtg D38999/2 ** MIL--38999 III Receptacle, Hermetic D38999/23 ** MIL--38999 III Receptacle, Hermetic, Jam Nut D38999/ H MIL--38999 III Receptacle, Jam Nut D38999/25 ** MIL--38999 III Receptacle, Hermetic, Solder Mtg D38999/26 H MIL--38999 III Plug, Straight D38999/27 ** MIL--38999 III Receptacle, Hermetic, Weld Mtg D38999/29 * MIL--38999 III Plug, Lanyard Release D38999/30 H-70 MIL--38999 III Plug, Lanyard Release D38999/40 H MIL--38999 IV Receptacle, Wall Mtg D38999/42 H MIL--38999 IV Receptacle, ox Mtg D38999/44 H-75 MIL--38999 IV Receptacle, Jam Nut D38999/46 H MIL--38999 IV Plug, Straight, MI D38999/47 H MIL--38999 IV Plug, Straight M85/ J MIL--85 2 Receptacle, lange Mtg M85/2 ** MIL--85 2 Receptacle, Solder lange M85/3 J MIL--85 2 Receptacle, Jam Nut M85/4 ** MIL--85 2 Receptacle, Jam Nut M85/5 J MIL--85 2 Plug, able onnecting M85/6 J MIL--85 2 Plug M85/2 J MIL--85 Receptacle, lange Mtg M85/ ** MIL--85 Receptacle, Solder lange Mtg M85/23 J MIL--85 Receptacle, Jam Nut M85/ ** MIL--85 Receptacle, Jam Nut * onsult factory; ** onnector does not accommodate rear accessories 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3
eneral Information Military Standard onnector Index PRT NO. ONN. SPIITION SRIS DSRIPTION DSI. M85/25 J MIL--85 Receptacle, able onnecting M85/26 J MIL--85 Plug M85/27 ** MIL--85 Receptacle Thru-ulkhead, Jam Nut M85/ ** MIL--85 2 Receptacle, Thru-ulkhead, Single Hole Mtg M85/3 J MIL--85 2 Receptacle, lange Mtg M85/ J MIL--85 2 Receptacle, Jam Nut Mtg M85/33 J MIL--85 2 Recepacle,able onnecting M85/34 J MIL--85 2 Plug M85/35 J MIL--85 Receptacle, lange Mtg M85/ J MIL--85 Receptacle, Jam Nut M85/37 J MIL--85 Receptacle, able onnecting M85/38 J MIL--85 Plug M85/4 J MIL--85 3 Receptacle, lange Mtg M85/42 ** MIL--85 3 Receptacle, Solder lange Mtg M85/44 ** MIL--85 3 Receptacle, Jam Nut M85/45 J MIL--85 3 Receptacle, able onnecting M85/46 J MIL--85 3 Plug M85/47 ** MIL--85 3 Receptacle, Solder lange Mtg M85/48 ** MIL--85 3 Receptacle, Jam Nut M85/49 J MIL--85 3 Receptacle, Jam Nut M85/50 ** MIL--85 4 Receptacle, Jam Nut M85/5 J MIL--85 4 Receptacle, lange Mtg M85/52 ** MIL--85 4 Receptacle, Solder lange Mtg M85/53 J MIL--85 4 Receptacle, Jam Nut M85/54 ** MIL--85 4 Receptacle, Jam Nut M85/55 J MIL--85 4 Receptacle, able onnecting M85/56 J MIL--85 4 Plug M85/57 ** MIL--85 4 Receptacle, Solder lange Mtg M8582/ * MIL--8582 Receptacle, Single Hole Mtg M8582/2 * MIL--8582 Plug, Lanyard Release M83723/ MIL--83723 I Superseded by MS3470 M83723/2 MIL--83723 I Superseded by MS3470 M83723/3 MIL--83723 I Superseded by MS3472 M83723/4 MIL--83723 I Superseded by MS3472 M83723/5 MIL--83723 I Superseded by MS3474 M83723/6 MIL--83723 I Superseded by MS3474 M83723/7 MIL--83723 I Superseded by MS347 M83723/8 MIL--83723 I Superseded by MS347 M83723/9 ** MIL--83723 I Superseded by MS3440 M83723/0 ** MIL--83723 I Superseded by MS3442 M83723/ ** MIL--83723 I Superseded by MS3443 M83723/2 ** MIL--83723 I Superseded by MS3443 M83723/3 MIL--83723 I Superseded by MS3476 M83723/4 MIL--83723 I Superseded by MS3476 M83723/7 K MIL--83723 II Superseded by MS345 M83723/8 K MIL--83723 II Superseded by MS345 M83723/9 K MIL--83723 II Superseded by MS3450 * onsult factory; ** onnector does not accommodate rear accessories 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 4
Military Standard onnector Index eneral Information PRT NO. ONN. SPIITION SRIS DSRIPTION DSI. M83723/ K MIL--83723 II Superseded by MS3450 M83723/2 ** MIL--83723 II Superseded by MS3452 M83723/ ** MIL--83723 II Superseded by MS3452 M83723/23 K MIL--83723 II Superseded by MS3456 M83723/ K MIL--83723 II Superseded by MS3456 M83723/25 ** MIL--83723 II Superseded by MS342 M83723/26 ** MIL--83723 II Superseded by MS343 M83723/ MIL--83723 I Inactive or New Design M83723/37 MIL--83723 I Inactive or New Design M83723/38 MIL--83723 I Inactive or New Design M83723/39 MIL--83723 I Inactive or New Design M83723/40 MIL--83723 I Inactive or New Design M83723/4 MIL--83723 I Inactive or New Design M83723/42 MIL--83723 I Superseded by MS3475 M83723/43 MIL--83723 I Superseded by MS3475 M83723/45 ** MIL--83723 I Superseded by MS35 M83723/48 MIL--83723 I Inactive or New Design M83723/49 MIL--83723 I Inactive or New Design M83723/52 K MIL--83723 II Superseded by MS3459 M83723/53 K MIL--83723 II Superseded by MS3459 M83723/66 MIL--83723 III Plug, Push Pull (Pin ontacts) M83723/67 MIL--83723 III Plug, Push Pull (Socket ontacts) M83723/68 MIL--83723 III Plug, Push Pull Lanyard, (Pin ontacts) M83723/69 MIL--83723 III Plug, Push Pull, Lanyard, (Socket ontacts) M83723/7 MIL--83723 III Receptacle, ayonet, lange Mtg, (Socket ontact) M83723/72 MIL--83723 III Receptacle, ayonet, lange Mtg, (Pin ontact) M83723/73 MIL--83723 III Receptacle, ayonet, Single Hole Mtg, (Socket ontact) M83723/74 MIL--83723 III Receptacle, ayonet Single Mtg, (Pin ontact) M83723/75 MIL--83723 III Plug, ayonet (Socket ontact) M83723/76 MIL--83723 III Plug, ayonet (Pin ontact) M83723/77 MIL--83723 III Plug, ayonet, RI (Socket ontact) M83723/78 MIL--83723 III Plug, ayonet, RI (Pin ontact) M83723/79 ** MIL--83723 III Receptacle, ayonet lange Mtg, Hermetic M83723/80 ** MIL--83723 III Receptacle, ayonet Solder lange Mtg, Hermetic M83723/8 ** MIL--83723 III Receptacle, ayonet Single Hole Mtg, Hermetic M83723/82 MIL--83723 III Receptacle, Threaded, lange Mtg, (Socket ontact) M83723/83 MIL--83723 III Receptacle, Threaded, lange Mtg, (Pin ontact) M83723/84 MIL--83723 III Receptacle, Threaded Single Hole Mtg, (Socket ontact) M83723/85 MIL--83723 III Receptacle, Threaded Single Hole Mtg, (Pin ontact) M83723/86 MIL--83723 III Plug, Threaded, (Socket ontact) M83723/87 MIL--83723 III Plug, Threaded, (Pin ontact) M83723/88 ** MIL--83723 III Receptacle, Threaded, lange Mtg, (Pin ontact) M83723/89 ** MIL--83723 III Receptacle, Threaded, Single Hole Mtg, Hermetic M83723/90 ** MIL--83723 III Receptacle, Threaded, Solder lange Mtg, Hermetic M83723/9 MIL--83723 III Plug, Threaded, RI (Socket ontact) M83723/92 MIL--83723 III Plug, Threaded, RI (Pin ontact) M83723/93 ** MIL--83723 III Receptacle, ayonet, Solder lange Mtg, Hermetic * onsult factory; ** onnector does not accommodate rear accessories 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 5
eneral Information Military Standard onnector Index PRT NO. ONN. SPIITION SRIS DSRIPTION DSI. M83723/94 ** MIL--83723 III Receptacle, ayonet, Single Hole Mtg, Hermetic M83723/95 MIL--83723 III Plug, Threaded, (Socket ontact), Self Locking M83723/96 MIL--83723 III Plug, Threaded, (Pin ontact), Self Locking M83723/97 MIL--83723 III Plug, Threaded, RI (Socket ontact), Self Locking M83723/98 MIL--83723 III Plug, Threaded, RI (Pin ontact), Self Locking NT00 H* SSQ2635 Receptacle, lange NT06 H* SSQ2635 Plug NT07 H* SSQ2635 Receptacle, Jam Nut NT09 *** SSQ2635 Receptacle, Weld Mtg NT77 *** SSQ2635 Receptacle, Jam Nut NT99 *** SSQ2635 Receptacle, Weld Mtg NO 40M39569 Receptacle, lange Mtg NOH ** 40M39569 Receptacle, Hermetic N3H ** 40M39569 Receptacle, Hermetic N4 40M39569 Receptacle, lange Mtg N5H ** 40M39569 Thru-ulkhead, Hermetic N6 40M39569 Plug, Straight N6 40M39569 Plug, Straight,MI N7 40M39569 Receptacle, Jam Nut N7H ** 40M39569 Receptacle, Hermetic N8H ** 40M39569 Receptacle, Hermetic NLSO 40M38277 Receptacle, lange Mtg NLS3H ** 40M38277 Receptacle, Hermetic NLS6 40M38277 Plug, Straight NLS6 40M38277 Plug, Straight, MI NLS7 40M38277 Receptacle, Jam Nut NLS7H ** 40M38277 Receptacle, Jam Nut NZL00 H** SSQ2635 Receptacle, lange NZL03 *** SSQ2635 Receptacle, Lever NZL06 H** SSQ2635 Plug NZL07 H** SSQ2635 Receptacle, Weld Mtg NZL09 *** SSQ2635 Receptacle, Weld Mtg NZL66 H** SSQ2635 Plug NZL77 *** SSQ2635 Receptacle, Jam Nut NZL99 *** SSQ2635 Receptacle, Weld Mtg * onsult factory ** onnector does not accommodate rear accessories H* NT Series size 09 through 25 mates to lenair onnector Designator H, consult factory for sizes 33 & 37 H** NZL Series requires special accessories manufactured by lenair, consult factory *** onnector noted does not have accessory thread. (NZL and NT hermetic/control leakage classes.) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6
Potting oot Rings Potting oot Rings Potting oot Rings are designed for use with M85049/74 and /75 potting boots. The plastic potting boots snap in place to provide an easy and convenient receptacle for cable sealing potting material. lenair s Military Superceeding ommercial onnector Interface Page Specification Part Number atalog P/N Description or lenair Designator Number MS27485 M85049/58 ** Potting oot dapter 30-2* S85049/58 ** Potting oot Ring 30-2 S85049/6 ** Potting oot Ring MIL--27599 30-3 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 30-
Potting oot Rings S85049/58 Potting oot Ring lenair onnector Designator MIL--38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/58-0 Dash No..9 (5.3) ±.00 (.3) D Dash No. 8 0 2 4 6 8 Ref. 8/9 0/ 2/3 4/5 6/7 8/9 /2 /23 /25 UN-2.4375 -.5625 -.6875 -.825 -.9375 -.0625-8.875-8.5-8.4375-8 TL I Dia.600 (5.2).726 (8.4).850 (2.6).976 (.8).02 (25.7).6 (3.).352 (34.3).476 (37.5).602 (40.7) Dia.506 (2.9).63 (6.0).756 (9.2).88 (.4).006 (25.6).3 (.7).256 (3.9).38 (35.).506 (38.3) D Dia ±.005 (.).344 (8.7).472 (2.0).586 (4.9).7 (8.).8 (2.2).942 (23.9).067 (27.).92 (30.3).37 (33.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. inish: 500 Hour admium Olive Drab Over lectroless Nickel. 4. See page 68-2 for M85049/75 potting boot which can be used with this potting ring. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 30-2
S85049/6 Potting oot Ring Potting oot Rings or MIL--27599 onnectors M85049/6-0 Dash No..35 (3.4) D Dash No. 8 0 2 4 6 8 Ref. 8/9 0/ 2/3 4/5 6/7 8/9 /2 /23 /25 UN-2.4375 -.5625 -.6875 -.825 -.9375 -.0625-8.875-8.5-8.4375-8 TL I Dia.594 (5.).734 (8.6).844 (2.4).969 (.6).094 (27.8).234 (3.3).344 (34.).469 (37.3).594 (40.5) Dia ±.005 (.).52 (3.2).647 (6.4).77 (9.6).897 (.8).023 (26.0).47 (29.).273 (.3).397 (35.5).5 (38.7) D Dia ±.00 (.3).476 (2.).602 (5.3).726 (8.4).852 (2.6).978 (.8).02 (.0).8 (3.2).352 (34.3).478 (37.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. inish: 500 Hour admium Olive Drab Over lectroless Nickel. 4. See page 68- for M85049/74 potting boot which can be used with this potting ring. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 30-3
lenair Series 80 Mighty Mouse onnectors Phenomenal Performance; Itty-itty Package O The Mouse That Roared ne of the most common design requirements for interconnect technology used in high-reliability applications is size and weight reduction. When electronic systems expand in number and complexity in military air, sea and ground applications, the available space for interconnect cabling is reduced. nd when the latest generation of land vehicle, fighter jet or Navy ship needs to accomodate more systems and controls than ever before and still weigh less than it did last time then reducing connector package size and weight becomes a critical concern. The lenair Series 80 Mighty Mouse onnector was built precisely for such situations. t less than /2 the size and weight of high-density connectors such as the D38999 with comparable environmental and mechanical performance the Series 80 onnector is truly The Mouse That Roared. 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany N o r d i c rance Italy S p a i n
Shrink oot dapters Shrink oot dapters The Shrink oot dapters included in this section all are designed to accommodate lipped-type shrink boots such as those defined on MS309 and MS37 (not supplied by lenair). Shrink boots are used both for mechanical strain relief and a degree of environmental protection. lenair s lenair Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS358 M85049/60-30S00 Shrink oot dapter 3-4 MS346 M85049/60-2 30S002 Shrink oot dapter 3-5 M38999/2 M85049/62 30S00 Shrink oot dapter 3-6* M83723/6M M85049/60-2 30S002 Shrink oot dapter 3-5* M83723/27M 30KS002 Shrink oot dapter K 3-2 S85049/59 30S002 Shrink oot dapter 3-3 S85049/60-30S00 Shrink oot dapter 3-4 S85049/60-2 30S002 Shrink oot dapter 3-5 S85049/62 30S00 Shrink oot dapter 3-6 S85049/69 30HS00 Shrink oot dapter H 3-7 * Page Number of Superceeding Part Number 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3-
Shrink oot dapters M83723/27M Shrink oot dapters lenair onnector Designator K MIL--83723 Series II Dash Number M83723/27M (M ackshell Only Dash No. 08 0 2 3 4 5 6 7 8 40 Ref. 8S 0S 0SL 2 2S 4 4S 6 6S 8 40 lass 2.438 - UN.500 - UN.562 - UN.625 - UN.625 - UN.750 - UN.750 - UN.875 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.375-8 UN.625-8 UN.875-6 UN 2.25-6 UN 2.375-6 UN Dia.58 (4.7).64 (6.3).70 (7.8).76 (9.3).76 (9.3).89 (.6).89 (.6).0 (25.7).0 (25.7).4 (29.0).26 (.0).39 (35.3).52 (38.6).76 (44.7) 2.0 (5.) 2.26 (57.4) 2.5 (63.8) TL I Dia.303 (7.7).383 (9.7).408 (0.4).408 (0.4).490 (2.4).490 (2.4).609 (5.5).609 (5.5).730 (8.5).870 (.).978 (.8).090 (27.7).250 (3.8).5 (38.6).756 (44.6).880 (47.8) Dia Min.479 (2.2).539 (3.7).608 (5.4).659 (6.7).659 (6.7).782 (9.9).782 (9.9).908 (23.).908 (23.).025 (26.0). (30.8).343 (34.).450 (.8).67 (42.4).956 (49.7) 2.64 (55.0) 2.500 (63.5).830 (2.).830 (2.).830 (2.).830 (2.).830 (2.).830 (2.).830 (2.).996 (25.3).996 (25.3).996 (25.3).996 (25.3).996 (25.3).996 (25.3).076 (27.3).076 (27.3).076 (27.3).2 (3.0). or complete dimensions see applicable Military Specification. 2. inish: lectroless Nickel 3. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3-2
S85049/59 Shrink oot dapter Shrink oot dapters lenair onnector Designator MIL--992 Packing M85049/59 0 inish = lack nodize W = 500 Hour admium Olive Drab Over lectroless Nickel.35 (3.4) dapter Dia H dapter 2 4 6 8 40 44 lass 2-LH.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.375-8 UN.625-8 UN.875-6 UN 2.062-6 UN 2. - 6 UN 2.625-6 UN 2.875-6 UN.933 (23.7).057 (26.8).82 (30.0).307 (33.2).5 (38.9).557 (39.5).797 (45.6) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.869 (72.9) 3. (79.2) TL I ±.06 (.4).479 (2.2).479 (2.2).479 (2.2).479 (2.2).479 (2.2).479 (2.2).479 (2.2).479 (2.2).479 (2.2).479 (2.2).667 (6.9).667 (6.9) ±.03 (.8).75 (29.8).75 (29.8).75 (29.8).75 (29.8).75 (29.8).75 (29.8).75 (29.8).75 (29.8).75 (29.8).75 (29.8).375 (34.9).375 (34.9) H Dia ±.00 (.3).798 (.3).9 (23.4).048 (26.6).72 (29.8).297 (.9).423 (.).662 (42.2).9 (48.8) 2.72 (55.2) 2.4 (6.5) 2.734 (69.4) 2.982 (75.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3-3
Shrink oot dapters S85049/60- and MS358 Shrink oot dapters lenair onnector Designator M85049/60- W MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 inish = nodize lack N = lectroless Nickel W =,000 Hr. admium Olive Drab MS358- Superceded Part Number inish =,000 Hr. admium Olive Drab = admium Olive Drab N = lectroless Nickel. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3 8 0 2 4 6 8 40 44 48 6 lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN Dia +.000 (0.0) -.045 (.4).67 (7.0).62 (5.7).74 (8.8).86 (2.8).98 (.9). (.2). (3.0).35 (34.3).47 (37.3).59 (40.4).97 (50.0) 2. (56.4) 2.47 (62.7) 2.72 (69.) 2.97 (75.4) 3. (8.8).65 (4.9) TL I Min Dia.355 (9.0).49 (2.5).565 (4.4).690 (7.5).769 (9.5).894 (.7).09 (25.9).34 (.8).9 (34.8).65 (4.0).830 (46.5) 2.045 (5.9) 2.300 (58.4) 2.550 (64.8).74 (29.8) Dia +.000 (0.0) -.0 (0.5).533 (3.5).533 (3.5).605 (5.4).774 (9.7).838 (2.3).963 (.5).042 (26.5).27 (30.9).355 (34.4).443 (.7).709 (43.4).99 (48.7) 2.69 (55.) 2.402 (6.0) 2.657 (67.5) 2.907 (73.8).529 (38.8).8 (2.).8 (2.).8 (2.).8 (2.).8 (2.).8 (2.).8 (2.).8 (2.).8 (2.).8 (2.).994 (25.3).994 (25.3).994 (25.3).994 (25.3).994 (25.3).994 (25.3).8 (2.) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3-4
S85049/60-2 and MS346- Shrink oot dapters Shrink oot dapters lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 Style M85049/60-2 W MS346- inish = nodize lack N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Superceded Part Number inish = admium Olive Drab Over lectroless Nickel N = lectroless Nickel D. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3 8 0 2 4 6 8 40 44 48 6 lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN TL I D Dia +.000 (0.0) -.0 (0.5).709 (8.0).657 (6.7).774 (9.7).898 (.8).0 (26.0).52 (29.3).3 (3.6).370 (34.8).443 (.7).68 (4.).969 (50.0) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) 3.29 (8.8).653 (42.0) Dia +.000 (0.0) -.045 (.).750 (9.).688 (7.5).803 (.4).938 (23.8).063 (27.0).238 (3.4).30 (33.3).4 (.5).560 (39.6).686 (42.8) 2.062 (52.4) 2. (58.7) 2.562 (65.) 2.82 (7.4) 3.062 (77.8) 3. (84.).748 (44.4).540 (3.7).540 (3.7).540 (3.7).540 (3.7).540 (3.7).540 (3.7).540 (3.7).540 (3.7).540 (3.7).540 (3.7).702 (7.8).702 (7.8).702 (7.8).702 (7.8).702 (7.8).702 (7.8).540 (3.7) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3-5
Shrink oot dapters S85049/62 and M38999/2 Shrink oot dapters lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/62-0 W D Drain Hole Option (Omit for none) inish = nodize lack N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Drain Holes 4 Places Optional 08 0 2 4 6 8 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia +.000 (0.0) -.062 (.6).567 (4.4).704 (7.9).829 (2.).954 (.2).079 (27.4).3 (30.6).9 (33.8).454 (.9).579 (40.) TL I Dia Min.375 (9.5).500 (2.7).625 (5.9).750 (9.).82 (.6).937 (23.8).062 (27.0).88 (30.2) Dia Min.533 (3.5).605 (5.4).774 (9.7).838 (2.3).963 (.5).042 (26.5).27 (30.9).355 (34.4).443 (.7).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3-6
S85049/69 Shrink oot dapters Shrink oot dapters lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/69- D Drain Hole Option (Omit for none) inish = nodize lack Drain Holes 4 Places Optional 9 3 5 7 9 2 23 25 lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.600 (5.).77 (8.2).834 (2.8).990 (25.4).07 (.2).2 (3.09).34 (34.06).453 (.90).567 (39.80) TL I Dia Min.375 (9.5).500 (2.7).625 (5.9).750 (9.).82 (.6).938 (23.8).062 (27.0).88 (30.2) Dia.533 (3.5).605 (5.4).774 (9.7).838 (2.3).963 (.5).042 (26.5).27 (30.9).355 (34.4).443 (.7).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 3-7
Need something unusual in a multi-contact connector? Then consider lenair's expertise in high reliability connector design and development. lenair's line of innovative, specialty connectors has grown, year after year, to become one of the most diverse in the industry. Our application engineers have worked directly with commercial, industrial and military customers worldwide to design and build such products as quick disconnects for missile launchers, high tempera- ture connectors for jet engines, shorting plugs to prevent accidental weapon firing, explosion-proof bulkhead feed-throughs for marine and off-shore platform use, and hermetically-sealed MIL-DTL-38999 connectors for military applications. So, for extraordinary applications, consider an extraordinary partner: lenair. ommercial and Mil Spec connector accessories onvoluted tubing and metal-core conduit lectrical and fiber optic cable assemblies omposite thermoplastic components Microminiature connectors and accessories ackshell assembly and termination tools 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany Nordic rance Italy Spain
dapters/xtenders dapter/ xtender ackshells The accessories in this section are simple straight backshells which provide for thread adaptations or extensions behind the connector. lenair s lenair onnector Military Superceeding ommercial Designator or Page Specification Part Number atalog P/N Description Interface Number MS384 M85049/34 ** dapter D -3* M83538/9 ** dapter MIL-DTL-83538/4-2 S85049/34 ** dapter D -3 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 -
dapter/ xtender ackshells M83538/9S dapters/xtenders or Use With MIL--83538/4 M83538/9S 09.375 (34.93).485 (2.).45 (3.68).5 (5.2).50 (3.8) (Number of Teeth).500 (38.0) Dia.25 (.58) Dia Min Dia. "" ccessory Thread M34 x.0-6g-0.00 R Thread.035 (.89) 09 3 5 7 9 2 23 "" ccessory Thread M2x.0-6g 0.00R M5x.0-6g 0.00R M8x.0-6g 0.00R Mx.0-6g 0.00R M25x.0-6g 0.00R Mx.0-6g 0.00R M3x.0-6g 0.00R M34x.0-6g 0.00R TL I Dia ±.005 (0.3).3 (8.8).440 (.8).559 (4.).76 (8.9).834 (2.8).952 (.8).070 (27.8).88 (30.8) Number of Teeth 2 6 40. or complete dimensions see applicable Military Specification. 2. Material is corrosion resistant steel. 3. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-2
S85049/34 dapters/xtenders dapter/ xtender ackshells lenair onnector Designator D MIL--26482 Series or Use With MS34 and MS3 onnectors Only M85049/34-2 W inish W = 500 Hr. admium Olive Drab Over lectroless Nickel D H Thread Thread 8 0 2 4 6 8 D Dia.500 (2.7).609 (5.5).734 (8.6).859 (2.8).969 (.6).09 (.2).29 (3.0).344 (34.).469 (37.3) Dia.7 (8.3).444 (.3).569 (4.5).673 (7.).798 (.3).95 (23.2).030 (26.2).55 (29.3).0 (.5) TL I.82 (.6).82 (.6).82 (.6).82 (.6).82 (.6).82 (.6).906 (23.0).906 (23.0).937 (23.8) Thread UN lass 2.4375 -.5625 -.6875 -.825 -.9375 -.0625-8.875-8.5-8.4375-8 H Thread UN lass 2.625 -.750 -.875 -.000 -.25-8.250-8.375-8.500-8.625-8. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-3
orrosion resistance and weight reduction high on your list? Upgrade to lenair's composite thermoplastic backshells and accessories. or most applications, backshells and accessories made from aluminum, stainless and carbon steel are recommended. ut for applications where additional weight savings and corrosion resistance are required, many customers are now specifying composite thermoplastic materials. lenair is the recognized leader in composite thermoplastic research and development for the interconnect accessory industry. In fact, no one else has tooled even a small fraction of the composite products available today from lenair in stock and ready for same-day shipment. ommercial and Mil Spec connector accessories onvoluted tubing and metal-core conduit lectrical and fiber optic cable assemblies omposite thermoplastic components Microminiature connectors and accessories ackshell assembly and termination tools 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany Nordic rance Italy Spain
Non-nvironmental Strain Relief ackshells Non- nvironmental ackshells Straight backshells are combined with a variety of strain reliefs to provide cable to connector protection in situations where environmental sealing is not required. onnector ackshell () Strain Relief (2) lenair s lenair Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number M38999/6 M85049/29 0S002 Non-nv. Strain Relief -5* M83723/35 ** 90 Non-nv. Strain Relief K -2 M83723/35S ** Non-nv. Strain Relief K -3 S85049/2 0HS002 Non-nv. Strain Relief H -4 S85049/29 0S002 Non-nv. Strain Relief -5 * Page Number of Superceeding Part Number ** onsult actory ssembly Instructions The following suggested procedure serves as a guide for proper assembly and installation of lenair Non-nvironmental ackshells. It is recommended that trial samples of appropriate cables or wire bundles be used to determine proper trim dimensions of the individual conductors and cable jackets, if applicable. a. Temporarily assemble backshell () to connector. b. If cable is jacketed, insert cable into backshell () and bottom against connector. Hold cable in position and mark cable jacket at rear end of backshell. c. Remove backshell from connector and place on cable with strain relief (2). e. Prepare and terminate cable conductors in accordance with established practices. f. ssemble backshell () to connector and tighten securely. g. ssemble strain relief (2) to backshell and tighten securely. Tighten strain relief saddles securely on cable or harness. NOT: s with any electrical connector assembly procedure, be sure to use the proper tools. or convenient, reliable assembly of the connectors and backshells, it is suggested that lenair's connector holding tools, strap wrenches and connector pliers be used. d. Trim cable jacket at a point /2 inch toward connector from mark made in step (b) above. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 -
Non- nvironmental ackshells M83723/35 Non-nvironmental Strain Relief ackshells lenair onnector Designator K MIL-DTL-83723 Series II M83723/35 Dash No. inish: = lack nodize R = lectroless Nickel Safety Wire Holes able Range Dash No. 08 0 3 2 5 4 7 6 8 40 lass 2.438 - UN.500 - UN.562 - UN.625 - UN.625 - UN.750 - UN.750 - UN.875 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.375-8 UN.625-8 UN.875-6 UN 2.25-6 UN 2.375-6 UN Dia.805 (.4).890 (.6).975 (.8).005 (25.5).005 (25.5).30 (.7).30 (.7).255 (3.9).255 (3.9).350 (34.3).475 (37.5).600 (40.6).725 (43.8).975 (50.2) 2.5 (56.5) 2.475 (62.9) 2.750 (69.9) TL I.87 (30.).87 (30.). (33.3). (33.3).468 (37.3).437 (.5).594 (40.5).53 (38.9).687 (42.8).765 (44.8) 2.000 (50.8) 2.000 (50.8) 2.265 (57.5) 2.265 (57.5) 2.578 (65.5) 2.85 (7.5) 5.800 (47.3).2 (3.0).250 (3.8).0 (.5).0 (.5).0 (.5).405 (35.7).405 (35.7).529 (38.8).529 (38.8).593 (40.5).655 (42.0).78 (43.6).894 (48.).973 (50.) 2.87 (55.5) 2.405 (6.) 5.00 (29.5) Min.02 (2.6).02 (2.6).40 (3.6).40 (3.6).40 (3.6).95 (5.0).95 (5.0).255 (6.5).255 (6.5).5 (7.2).350 (8.9).350 (8.9).468 (.9).468 (.9).664 (6.9).694 (7.6).9 (23.) able Range.235 (6.0).235 (6.0).297 (7.5).297 (7.5).297 (7.5).4 (0.7).4 (0.7).547 (3.9).547 (3.9).60 (5.5).735 (8.7).735 (8.7).9 (23.4).9 (23.4).235 (3.4).0 (34.5).630 (4.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-2
M83723/35S Non-nvironmental Strain Relief ackshells Non- nvironmental ackshells lenair onnector Designator K MIL-DTL-83723 Series II Dash No. M83723/35S inish: = lack nodize R = lectroless Nickel Dia able Range Dash No. 08 0 3 5 6 7 8 40 (s) Ref 8S 0S 0SL 2 & 2S 4 & 4S 6 6S 8 40 lass 2.438 - UN.500 - UN.562 - UN.625 - UN.750 - UN.875 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.375-8 UN.625-8 UN.875-6 UN 2.25-6 UN 2.375-6 UN Dia.59 (5.0).65 (6.5).73 (8.5).77 (9.6).9 (23.).03 (26.2).03 (26.2).7 (29.7).30 (33.0).42 (.).53 (38.9).80 (45.7) 2.04 (5.8) 2.27 (57.7) 2.78 (70.6) TL I.290 (.8).290 (.8).290 (.8).290 (.8).8 (34.7).587 (40.3).430 (.3).695 (43.).695 (43.).695 (43.).93 (49.0).93 (49.0).869 (47.5).869 (47.5) 2.875 (73.0).843 (2.4).843 (2.4).906 (23.0).085 (27.6).093 (27.8).275 (.4).87 (30.).475 (37.5).500 (38.).70 (43.4).79 (43.7) 2.040 (5.8) 2.3 (59.2) 2. (58.7) 2.950 (74.9) able Range Min.25 (3.2).25 (3.2).70 (4.3).70 (4.3).235 (6.0).295 (7.5).295 (7.5).5 (8.3).380 (9.7).380 (9.7).500 (2.7).500 (2.7).705 (7.9).725 (8.4).9 (23.).235 (6.0).235 (6.0).7 (7.3).297 (7.5).4 (0.7).547 (3.9).547 (3.9).60 (5.5).735 (8.7).735 (8.7).9 (23.4).9 (23.4).235 (3.4).0 (34.5).630 (4.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-3
Non- nvironmental ackshells S85049/2 Non-nvironmental Strain Relief ackshells lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 inish = lack nodize M85049/2 02 Length ode (Omit for Standard) lamp Length. (33.3) able Range 9 3 5 7 9 2 23 25 lamp (Table IV) Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 TL I lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.75 (9.).85 (2.6).00 (25.4).0 (27.9).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5) lamp 0 02 03 04 05 06 07 08 09 0 Min.062 (.6).25 (3.2). (7.9).437 (.).562 (4.3).687 (7.4).82 (.6).937 (23.8).062 (27.0) TL II able Range.25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).80 (.3).00 (25.4).0 (27.9). (30.5).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5).90 (48.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Length ode Std. TL III vailable s 09-25 09-25 5-25 2-25 Length.500 (38.) 2.500 (63.5) 3.500 (88.9) 4.500 (4.3) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-4
S85049/29 Non-nvironmental Strain Relief ackshells Non- nvironmental ackshells lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/29 0 N 03 inish = lack nodize N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Length ode (Omit for Standard) lamp Length. (33.3) able Range 08 0 2 4 6 8 Series I Ref. 09 3 5 7 9 2 23 25 TL I lamp (Table II) Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia +.000 (0.0) -.062 (.6).567 (4.4).704 (7.9).829 (2.).954 (.2).079 (27.4).3 (30.6).9 (33.8).454 (.9).579 (40.) lamp 0 02 03 04 05 06 07 08 09 0 Min.062 (.6).25 (3.2). (7.9).437 (.).562 (4.3).687 (7.4).82 (.6).937 (23.8).062 (27.0) TL II able Range.25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).78 (9.8).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).625 (4.3).750 (44.5).875 (47.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Length ode Std. TL III vailable s 08-08 - 4 - - Length.00 (25.4) 2.00 (50.8) 3.00 (76.2) 4.00 (0.6) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-5
Still juggling an army of interconnect suppliers? T t lenair we offer One-Stop-Shopping ired of managing dozens of specialty suppliers with only limited ability to keep pace with your evolving interconnect requirements? lenair is commited to providing complete, system-level solutions to even your most challanging interconnect requirements. Our expertise extends well beyond discrete backshells and connectors to encompass the entire range of interconnect components and asembled systems. rom conduit systems to overmolded cable assemblies, lenair is ready with a truly broad mix of interconnect products and assembly services. nd best of all, many lenair products are in stock, ready for immediate same-day shipment. ommercial and Mil Spec connector accessories onvoluted tubing and metal-core conduit lectrical and fiber optic cable assemblies omposite thermoplastic components Microminiature connectors and accessories ackshell assembly and termination tools 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany Nordic rance Italy S p a i n
nvironmental ackshells nvironmental ackshells lenair nvironmental ackshells offer excellent immersion capability when used with impervious jacketed cables. resilient grommet which fits into a counterbore in the backshell compresses and seals against the cable jacket when the strain relief is tightened. onnector Strain Relief (4) ackshell () ollower (3) rommet (2) lenair s lenair Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS388 M85049/9 37000 90 nv. ackshell 37- MS389 M85049/7 37000 45 nv. ackshell 37- MS3437 M85049/ 370S00 Str. nv. ackshell 37- M840/6 ** Str. nv. ackshell 37-2 M840/8 ** 90 nv. ackshell 37-3 M840/9 ** 45 nv. ackshell 37-4 S85049/3 ** Str. nv. ackshell 37-5 S85049/3 2 ** Str. nv. ackshell 37-6 S85049/3 3 ** Str. nv. ackshell 37-7 S85049/4 ** Str. nv. ackshell 37-8 S85049/4 2 ** Str. nv. ackshell 37-0 S85049/4 3 ** Str. nv. ackshell 37-2 S85049/5 ** Str. nv. ackshell 37-4 S85049/5 2 ** Str. nv. ackshell 37-6 S85049/5 3 ** Str. nv. ackshell 37-8 S85049/7 37000 45 nv. ackshell 37- S85049/9 37000 90 nv. ackshell 37- S85049/ 370S00 Str. nv. ackshell 37- ** onsult actory ssembly Instructions The following suggested procedure serves as a guide for proper assembly and installation of straight lenair nvironmental ackshells for use with jacketed cables. It is recommended that trial samples of appropriate cables be used to determine proper trim dimensions of the cable jacket and individual conductors. a. Temporarily assemble backshell () to connector. b. Place grommet (2), follower (3), and strain relief (4) on cable in sequence shown. Keep these components at a convenient distance from the end of the cable so they will not interfere with subsequent assembly steps. c. Insert cable into backshell () and bottom against connector. Hold cable in position and mark cable jacket at rear end of backshell. d. Remove backshell from connector and place on cable with components in step (b) above. e. Trim cable jacket at mark in step (c) above. Depending on type of connector contact temination used (solder, crimp, etc.) the length of individual conductors may require shortening by 3/4 inch to assure that the cable jacket will be in proper position when grommet (2) is clamped and compressed. f. Prepare and terminate cable conductors in accordance with established practices. g. ssemble backshell () to connector and tighten securely. Slide grommet (2) into backshell and position follower (3) against grommet. h. ttach strain relief (4) to backshell and tighten securely. If provided, tighten strain relief saddles securely on cable jacket. NOT: s with any electrical connector assembly procedure, be sure to use the proper tools. or convenient reliable assembly of the connector and backshell, it is suggested that lenair's connector holding tools, strap wrenches and connector pliers be used. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-
nvironmental ackshells 3 5 7 9 23 25 29 33 Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 lenair onnector Designator MIL--840 TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.563-8 UN.875-6 UN 2.063-6 UNS Ref. 3 3 5 5 5 5 7 7 7 9 9 23 23 23 25 25 25 25 29 29 33 33 3 3 5 ±.2 (3.0) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.62 (7.3) 4.62 (7.3) 4.62 (7.3) 4.62 (7.3) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 4.2 (04.6) 4.2 (04.6) Dia.03 (26.2).4 (29.0).26 (.0).39 (35.3).5 (38.4).70 (43.2).82 (46.2) 2.4 (54.4) 2.33 (59.2) Dash No. (Table II) TL II Ref. Dim. (.5). (.5). (.5). (.5). (.5). (.5). (33.3). (.5). (33.3).406 (35.7). (.5).406 (35.7). (33.3).406 (35.7).593 (40.5).406 (35.7).593 (40.5).593 (40.5).625 (4.3).593 (40.5).625 (4.3).625 (4.3).900 (48.3). (.5). (.5). (.5). (.5). (.5) M840/6 nvironmental ackshells M840/6 6 W Ref. Dim.938 (23.8).938 (23.8).25 (.6).938 (23.8).25 (.6). (33.3).593 (40.5). (33.3).593 (40.5).750 (44.5). (33.3).750 (44.5).593 (40.5).750 (44.5) 2.093 (53.2).750 (44.5) 2.093 (53.2) 2.093 (53.2) 2.343 (59.5) 2.093 (53.2) 2.343 (59.5) 2.343 (59.5) 2.750 (69.9).25 (.6). (33.3). (33.3). (33.3). (33.3) Style Designator - = nvironmental Material and inish Designator D = orrosion Resistant Steel, admium Plate, lack W = lumimum, admium Olive Drab over lectroless Nickel 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-2 Min.88 (4.8).88 (4.8). (7.).88 (4.8). (7.).344 (8.7).438 (.).375 (9.5).438 (.).625 (5.9).375 (9.5).625 (5.9).438 (.).625 (5.9).82 (.6).625 (5.9).82 (.6).875 (.2).000 (25.4).82 (.6).000 (25.4).000 (25.4).250 (3.8). (7.).344 (8.7).344 (8.7).375 (9.5).375 (9.5) able Range. (7.9). (7.9).438 (.). (7.9).438 (.).562 (4.3).750 (9.).625 (5.9).750 (9.).938 (23.8).625 (5.9).938 (23.8).750 (9.).938 (23.8).88 (30.2).938 (23.8).88 (30.2).250 (3.8).380 (35.).88 (30.2).380 (35.).380 (35.).625 (4.3).438 (.).562 (4.3).562 (4.3).625 (5.9).625 (5.9) able Range. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria.
M840/8 nvironmental ackshells nvironmental ackshells lenair onnector Designator M840/8 6 W Style Designator - = nvironmental 3 5 7 9 23 25 29 33 MIL--840 TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.563-8 UN.875-6 UN 2.063-6 UNS Dash No. (Table II) Dia.03 (26.2).4 (29.0).26 (.0).39 (35.3).5 (38.4).70 (43.2).82 (46.2) 2.4 (54.4) 2.33 (59.2) Material and inish Designator D = orrosion Resistant Steel, admium Plate, lack W = lumimum, admium Olive Drab over lectroless Nickel Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 Ref. 3 3 5 5 5 5 7 7 7 9 9 23 23 23 25 25 25 25 29 29 33 33 3 3 5 nvelope 2.64 (66.4) 2.64 (66.4) 2.64 (66.4) 2.864 (72.7) 2.864 (72.7) 2.864 (72.7) 3.4 (79.) 3.4 (79.) 3.4 (79.) 3.4 (79.) 3.4 (79.) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.64 (9.8) 3.64 (9.8) 3.64 (9.8) 3.64 (9.8) 4.4 (04.5) 4.4 (04.5) 2.64 (66.4) 2.864 (72.7) 2.864 (72.7) 3.4 (79.) 3.4 (79.) TL II 2.962 (75.2) 2.962 (75.2) 2.962 (75.2) 3.087 (78.4) 3.087 (78.4) 3.087 (78.4) 3. (84.) 3. (84.) 3.343 (84.9) 3.437 (87.3) 3. (84.) 3.462 (87.9) 3.8 (85.5) 3.462 (87.9) 3.649 (92.7) 3.462 (87.9) 3.649 (92.7) 3.774 (95.9) 3.806 (96.7) 3.774 (95.9) 3.806 (96.7) 4.056 (03.0) 4.33 (0.0) 2.962 (75.2) 3.087 (78.4) 3.087 (78.4) 3. (84.) 3. (84.) Ref. Dim.938 (23.8).938 (23.8).25 (.6).938 (23.8).25 (.6). (33.3).593 (40.5). (33.3).593 (40.5).750 (44.5). (33.3).750 (44.5).593 (40.5).750 (44.5) 2.093 (53.2).750 (44.5) 2.093 (53.2) 2.093 (53.2) 2.343 (59.5) 2.093 (53.2) 2.343 (59.5) 2.343 (59.5) 2.750 (69.9).25 (.6). (33.3). (33.3). (33.3). (33.3) Min.88 (4.8).88 (4.8). (7.).88 (4.8). (7.).344 (8.7).438 (.).375 (9.5).438 (.).625 (5.9).375 (9.5).625 (5.9).438 (.).625 (5.9).82 (.6).625 (5.9).82 (.6).875 (.2).000 (25.4).82 (.6).000 (25.4).000 (25.4).250 (3.8). (7.).344 (8.7).344 (8.7).375 (9.5).375 (9.5) able Range. (7.9). (7.9).438 (.). (7.9).438 (.).562 (4.3).750 (9.).625 (5.9).750 (9.).938 (23.8).625 (5.9).938 (23.8).750 (9.).938 (23.8).88 (30.2).938 (23.8).88 (30.2).250 (3.8).380 (35.).88 (30.2).380 (35.).380 (35.).625 (4.3).438 (.).562 (4.3).562 (4.3).625 (5.9).625 (5.9) able Range. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-3
nvironmental ackshells S840/9 nvironmental ackshells lenair onnector Designator M840/9 6 W Style Designator - = nvironmental 3 5 7 9 23 25 29 33 MIL--840 TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.563-8 UN.875-6 UN 2.063-6 UNS Dia.03 (26.2).4 (29.0).26 (.0).39 (35.3).5 (38.4).70 (43.2).82 (46.2) 2.4 (54.4) 2.33 (59.2) Dash No. (Table II). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Material and inish Designator D = orrosion Resistant Steel, admium Plate, lack W = lumimum, admium Olive Drab over lectroless Nickel Thread.75 (9.) Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 Ref. 3 3 5 5 5 5 7 7 7 9 9 23 23 23 25 25 25 25 29 29 33 33 3 3 5.03 (26.2).03 (26.2).03 (26.2).56 (29.4).56 (29.4).56 (29.4). (.5). (.5). (.5). (.5). (.5).406 (35.7).406 (35.7).406 (35.7).406 (35.7).406 (35.7).406 (35.7).53 (38.9).53 (38.9).53 (38.9).53 (38.9).78 (45.2).78 (45.2).03 (26.2).56 (29.4).56 (29.4). (.5). (.5) TL II Ref. Dim. (.5). (.5). (.5). (.5). (.5). (.5). (33.3). (.5). (33.3).406 (35.7). (.5).406 (35.7). (33.3).406 (35.7).593 (40.5).406 (35.7).593 (40.5).593 (40.5).625 (4.3).593 (40.5).625 (4.3).625 (4.3).900 (48.3). (.5). (.5). (.5). (.5). (.5) Ref. Dim.938 (23.8).938 (23.8).25 (.6).938 (23.8).25 (.6). (33.3).593 (40.5). (33.3).593 (40.5).750 (44.5). (33.3).750 (44.5).593 (40.5).750 (44.5) 2.093 (53.2).750 (44.5) 2.093 (53.2) 2.093 (53.2) 2.343 (59.5) 2.093 (53.2) 2.343 (59.5) 2.343 (59.5) 2.750 (69.9).25 (.6). (33.3). (33.3). (33.3). (33.3) able Range Min.88 (4.8).88 (4.8). (7.).88 (4.8). (7.).344 (8.7).438 (.).375 (9.5).438 (.).625 (5.9).375 (9.5).625 (5.9).438 (.).625 (5.9).82 (.6).625 (5.9).82 (.6).875 (.2).000 (25.4).82 (.6).000 (25.4).000 (25.4).250 (3.8). (7.).344 (8.7).344 (8.7).375 (9.5).375 (9.5). (7.9). (7.9).438 (.). (7.9).438 (.).562 (4.3).750 (9.).625 (5.9).750 (9.).938 (23.8).625 (5.9).938 (23.8).750 (9.).938 (23.8).88 (30.2).938 (23.8).88 (30.2).250 (3.8).380 (35.).88 (30.2).380 (35.).380 (35.).625 (4.3).438 (.).562 (4.3).562 (4.3).625 (5.9).625 (5.9) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-4 able Range
S85049/3 Style nvironmental ackshells nvironmental ackshells lenair onnector Designator MIL--992 lasses, J, and R M85049/3 W 0 Style Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 2 4 6 8 44 2 2 4 6 6 6 8 8 8 8 44 44 TL II Min. (7.).88 (4.8).344 (8.7).5 (3.0).4 (.).3 (7.9).53 (3.5).605 (5.4).406 (0.3). (9.2).75 (8.2).449 (.4).637 (6.2).787 (.0).692 (7.6).930 (23.6).675 (7.).984 (25.0).755 (9.2).055 (26.8).05 (.).85 (30.).3 (33.5).406 (35.7).250 (3.8).53 (38.9).437 (.5) 2.05 (53.5) 2.025 (5.4) lass 2-LH.7500 - UN.8750 - UN.0000 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.8750-6 UN able Range.375 (9.5). (7.).438 (.).605 (5.4).530 (3.5).405 (0.3).625 (5.9).699 (7.8).500 (2.7).455 (.6).8 (2.0).562 (4.3).750 (9.).900 (.9).805 (.4).055 (26.8).000 (25.4).09 (.2).880 (.4).80 (30.0).230 (3.2).30 (33.3).455 (37.0).53 (38.9).375 (34.9).656 (42.).562 (39.7) 2.250 (57.2) 2.70 (55.) Dia ±.05 (.4).933 (23.7).057 (26.8).83 (30.0).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 3. (79.2) ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Note 4.50 (38.) H J Thread TYP - Plug ap or use with MS7344 Type ( or ) Dash Number (Table II) J Thread TYP - Receptacle ap or use with MS7343, MS7345, and MS7347. or complete dimensions see applicable Military Specification. 2. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. pprox. hain Lengths: Dash No. 0-2 = 5.0 (27.0); Dash No. 3-29 = 6.0 (52.4) TL I Dia 3.5 (85.5).094 (27.8) 3.678 (93.4).29 (3.0) 4.77 (06.).344 (34.) 4.489 (4.0).469 (37.3) 4.65 (7.2).562 (39.7) 4.647 (8.0).688 (42.9) 4.896 (.4).938 (49.2) 4.959 (26.0) 2.29 (56.4) 5.02 (27.5) 2.469 (62.7) 5.083 (29.) 2.79 (69.) 6.47 (64.4) 3.27 (8.7) H.765 (9.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-5 J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.000-0.P-0.2L-DS.25-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 3.000-0.P-0.2L-DS
nvironmental ackshells S85049/3 Style 2 nvironmental ackshells lenair onnector Designator M85049/3 W 0 2 Style 2 MIL--992 lasses, J, and R. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. pprox. hain Lengths: Dash No. -5 = 5.0 (27.0) Dash No. 6-2 = 6.0 (52.4) ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Type ( or ) Dash Number (Table II) Dash No. 2 3 4 5 6 7 8 9 0 2 2 4 6 8 40 TL II Min.6 (6.2). (8.2).446 (.3).565 (4.4).690 (7.5).85 (.7).980 (.9).230 (3.2).030 (26.2).430 (.3).660 (42.2).860 (47.2) able Range.396 (0.).52 (3.2).646 (6.4).765 (9.4).890 (.6).05 (25.8).80 (30.0).430 (.3).230 (3.2).670 (42.4).860 (47.2) 2.0 (53.6).50 (38.) Note 4 J Thread TYP - Plug ap or use with MS7344 H J Thread TYP - Receptacle ap or use with MS7343, MS7345, and MS7347 2 4 6 8 40 lass 2-LH.7500 - UN.8750 - UN.0000 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.6250-6 UN Dia ±.05 (.4).933 (23.7).057 (26.8).83 (30.0).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.870 (72.9) TL I Dia 4.000 (0.6).094 (27.8) 4.00 (04.).29 (3.0) 4.400 (.8).344 (34.) 4.900 (.5).469 (37.3) 4.900 (.5).562 (39.7) 4.900 (.5).688 (42.9) 5.000 (27.0).938 (49.2) 5.300 (34.6) 2.29 (56.4) 5.600 (42.2) 2.469 (62.7) 5.600 (42.2) 2.79 (69.) 5.725 (45.4) 2.969 (75.4) H.765 (9.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.000-0.P-0.2L-DS.25-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 2.750-0.P-0.2L-DS 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-6
.50 (38.) TYP - Plug ap or use with MS7344 S85049/3 Style 3 nvironmental ackshells M85049/3 W 0 3 lenair onnector Designator MIL--992 lasses, J, and R ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel TL II able Range 2 2 4 6 6 Note 4 6 8 8 8 H J Thread J Thread TYP - Receptacle ap - or use with MS7343, MS7345, and MS7347. or complete dimensions see applicable Military Specification. 2. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. pprox. hain Lengths: Dash No. - = 5.0 (27.0); Dash No. 2-26 = 6.0 (52.4) Min. (7.).29 (5.6).400 (0.2).5 (3.0).4 (.). (8.0).605 (5.4).560 (4.2). (9.2).75 (8.2).449 (.4).787 (.0).637 (6.2).984 (25.0).875 (.2).755 (9.2).85 (30.).05 (.).055 (26.8).406 (35.7).3 (33.5).250 (3.8).53 (38.9).437 (.5) 2.05 (53.5) 2.025 (5.4) TL I Dia Dia H J Thread (plated) lass 2-LH ±.05 (.4) lass 2 ( or ) 2.7500 - UN.933 (23.7) 2.935 (74.5).094 (27.8).765 (9.4) 0.875-0.P-0.2L-DS 4.8750 - UN.057 (26.8) 3.8 (82.5).29 (3.0).765 (9.4).000-0.P-0.2L-DS 6.0000 - UN.83 (30.0) 3.72 (94.3).344 (34.).980 (.9).25-0.P-0.2L-DS 8.250-8 UN.307 (33.2) 4.0 (02.2).469 (37.3).980 (.9).250-0.P-0.2L-DS.2500-8 UN.433 (.4) 4.5 (04.5).562 (39.7).980 (.9).375-0.P-0.2L-DS.3750-8 UN.557 (39.5) 4.50 (05.4).688 (42.9).980 (.9).500-0.P-0.2L-DS.6250-8 UN.807 (45.9) 4. (07.0).938 (49.2).980 (.9).750-0.P-0.2L-DS.8750-6 UN 2.057 (52.2) 4.275 (08.6) 2.29 (56.4).980 (.9) 2.000-0.P-0.2L-DS 2.0625-6 UNS 2.307 (58.6) 4.337 (0.2) 2.469 (62.7).980 (.9) 2.250-0.P-0.2L-DS 2.5-6 UNS 2.557 (64.9) 4.399 (.7) 2.79 (69.).980 (.9) 2.500-0.P-0.2L-DS 44 2.8750-6 UN 3. (79.2) 5.799 (47.3) 3.27 (8.7).980 (.9) 3.000-0.P-0.2L-DS 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-7 Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 23 25 26 44 44.377 (9.6). (7.).438 (.).605 (5.4).530 (3.5).405 (0.3).699 (7.8).625 (5.9).455 (.6).8 (2.0).562 (4.3).900 (.9).750 (9.).09 (.2).000 (25.4).880 (.4).30 (33.3).230 (3.2).80 (30.0).53 (38.9).455 (37.0).375 (34.9).656 (42.).562 (39.7) 2.250 (57.2) 2.70 (55.) Style 3 Type ( or ) Dash Number (Table II) ppr. ree Length 3.344 (84.9) 3.344 (84.9) 4.344 (0.3) 5.88 (3.8) 4.688 (9.) 3.688 (93.7) 6.88 (57.2) 6.88 (57.2) 4.88 (06.4) 6.688 (69.9) 5.88 (3.8) 7.88 (82.6) 6.688 (69.9) 7.688 (95.3) 7.88 (82.6) 6.688 (69.9) 8.688 (2.7) 8.88 (8.0) 8.88 (8.0) 0.688 (27.5) 9.688 (6.) 9.688 (6.) 2.688 (3.3).88 (4.2) 7.88 (4.6) 7.88 (4.6) nvironmental ackshells
nvironmental ackshells lenair onnector Designator MIL--992 lasses, J, and R S85049/4 Style nvironmental ackshells M85049/4 W 0 ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Style Type ( or ) Dash Number (Table II) Note 4.50 (38.) H 2 4 8 40 44 J Thread TYP - Plug ap or use with MS7344 lass 2-LH.7500 - UN.8750 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.6250-6 UN 2.8750-6 UN Dia ±.05 (.4).933 (23.7).057 (26.8).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.870 (72.9) 3. (79.2) TL I J Thread TYP - Receptacle ap or use with MS7343, MS7345, and MS7347 Dia.094 (27.8).29 (3.0).469 (37.3).562 (39.7).688 (42.9).938 (49.2) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) 3.27 (8.7) H.765 (9.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.000-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 2.750-0.P-0.2L-DS 3.000-0.P-0.2L-DS 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-8
S85049/4 Style nvironmental ackshells nvironmental ackshells Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 2 2 2 4 4 4 4 8 40 40 40 40 44 4.275 (08.6) 3.678 (93.4) 4.275 (08.6) 4.77 (06.) 4.489 (4.0) 4.77 (06.) 4.77 (06.) 4.584 (6.4) 4.647 (8.0) 4.896 (.4) 4.647 (8.0) 4.896 (.4) 4.896 (.4) 4.896 (.4) 4.959 (26.0) 4.959 (26.0) 4.959 (26.0) 4.959 (26.0) 5.02 (27.5) 5.02 (27.5) 5.02 (27.5) 5.083 (29.) 5.385 (.8) 5.083 (29.) 5.385 (.8) 5.354 (.0) 5.354 (.0) 5.354 (.0) 5.354 (.0) 5.385 (.8) 5.682 (44.3) 5.682 (44.3) 5.6 (42.7) 5.6 (42.7) 6.47 (64.4) TL II ±.03 (.8).375 (34.9).25 (.6).375 (34.9).375 (34.9).562 (39.7).375 (34.9).375 (34.9).688 (42.9).82 (46.0) 2.25 (54.0).82 (46.0) 2.25 (54.0) 2.25 (54.0) 2.25 (54.0) 2.469 (62.7) 2.469 (62.7) 2.469 (62.7) 2.625 (66.7) 2.625 (66.7) 2.625 (66.7) 2.625 (66.7) 2.953 (75.0) 3.7 (80.5) 2.953 (75.0) 3.7 (80.5) 3.7 (80.5) 3.7 (80.5) 3.7 (80.5) 3.7 (80.5) 3.375 (85.7) 3.625 (92.) 3.500 (88.9) 3.375 (85.7) 3.375 (85.7) 3.53 (89.7) able Range Min.4 (.).406 (0.3).530 (3.5).500 (2.7).3 (7.9).405 (0.3).5 (3.0).53 (3.5).4 (.).605 (5.4).625 (5.9).530 (3.5).3 (7.9).405 (0.3).75 (8.2).637 (6.2).875 (.2).787 (.0).930 (23.6).875 (.2).984 (25.0).055 (26.8).85 (30.).05 (.).250 (3.8).3 (33.5).406 (35.7).250 (3.8).53 (38.9).700 (43.2).437 (.5).605 (40.8).775 (45.).605 (40.8).700 (43.2).859 (47.2).97 (48.7) 2.230 (56.6) 2.05 (53.5) 2.000 (50.8).97 (48.7) 2.83 (55.4).8 (2.0).750 (9.).000 (25.4).900 (.9).055 (26.8).000 (25.4).09 (.2).80 (30.0).30 (33.3).230 (3.2).375 (34.9).445 (.7).53 (38.9).375 (34.9).656 (42.).8 (46.4).562 (39.7).730 (43.9).900 (48.3).730 (43.9).825 (46.4).984 (50.4) 2.062 (52.4) 2.375 (60.3) 2.250 (57.2) 2.45 (54.5) 2.062 (52.4) 2.3 (59.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. pprox. hain Lengths: Dash No. -2 = 5.0 (27.0); Dash No. 3-35 = 6.0 (52.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-9
nvironmental ackshells S85049/4 Style 2 nvironmental ackshells lenair onnector Designator M85049/4 W 0 2 Style 2 MIL--992 lasses, J, and R ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Type ( or ) Dash Number (Table II) Note 4.50 (38.) H J Thread J Thread TYP - Plug ap or use with MS7344 TYP - Receptacle ap or use with MS7343, MS7345, and MS7347. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. pprox. hain Lengths: Dash No. -5 = 5.0 (27.0) Dash No. 6-3 = 6.0 (52.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-0
S85049/4 Style 2 nvironmental ackshells nvironmental ackshells 2 4 6 8 40 lass 2-LH.7500 - UN.8750 - UN.0000 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.6250-6 UN Dia ±.05 (.4).933 (23.7).057 (26.8).83 (30.0).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.870 (72.9) TL I Dia 4.000 (0.6).094 (27.8) 4.00 (04.).29 (3.0) 4.800 (2.9).344 (34.) 4.900 (.5).469 (37.3) 4.900 (.5).562 (39.7) 4.900 (.5).688 (42.9) 5.000 (27.0).938 (49.2) 5.300 (34.6) 2.29 (56.4) 5.600 (42.2) 2.469 (62.7) 5.725 (45.4) 2.79 (69.) 5.725 (45.4) 2.969 (75.4) H.765 (9.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.000-0.P-0.2L-DS.25-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 2.750-0.P-0.2L-DS Dash No. 2 3 4 5 6 7 8 9 0 2 3 2 4 6 8 40 40 ±.005 (.).29 (3.0).344 (34.).469 (37.3).625 (4.3).750 (44.5) 2.000 (50.8) 2.250 (57.2) 2.250 (57.2) 2.500 (63.5) 2.750 (69.9) 3.062 (77.8) 3.437 (87.3) 3.437 (87.3) TL II able Range Min. (8.2).52 (3.2).446 (.3).565 (4.4).690 (7.5).85 (.7).980 (.9).230 (3.2).030 (26.2).430 (.3).660 (42.2).860 (47.2) 2.0 (55.9) 2.0 (55.9).646 (6.4).765 (9.4).890 (.6).05 (25.8).80 (30.0).430 (.3).230 (3.2).670 (42.4).860 (47.2) 2.0 (53.6) 2.400 (6.0) 2.0 (55.9) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-
nvironmental ackshells S85049/4 Style 3 nvironmental ackshells lenair onnector Designator MIL--992 lasses, J, and R M85049/4 W 0 3 Style 3 ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Type ( or ) Dash Number (Table II) Note 4.50 (38.) H J Thread J Thread TYP - Plug ap or use with MS7344 TYP - Receptacle ap or use with MS7343, MS7345, and MS7347. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. pprox. hain Lengths: Dash No. -2 = 5.0 (27.0) Dash No. 3-33 = 6.0 (52.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-2
S85049/4 Style 3 nvironmental ackshells nvironmental ackshells 2 4 8 40 lass 2-LH.7500 - UN.8750 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.6250-6 UN Dia ±.05 (.4).933 (23.7).057 (26.8).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.870 (72.9) TL I Dia.094 (27.8).29 (3.0).469 (37.3).562 (39.7).688 (42.9).938 (49.2) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) H.765 (9.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.000-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 3.000-0.P-0.2L-DS Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 2 2 2 4 4 4 4 8 40 40 40 40 Min.4 (.).406 (0.3). (8.0).560 (4.2).5 (3.0).430 (0.9). (8.0).75 (8.2).930 (23.6).875 (.2).787 (.0).637 (6.2).984 (25.0).875 (.2).250 (3.8).85 (30.).05 (.).055 (26.8).406 (35.7).3 (33.5).250 (3.8).700 (43.2).605 (40.8).53 (38.9).97 (48.7).859 (47.2).775 (45.).700 (43.2).605 (40.8) 2.230 (56.6) 2.05 (53.5) 2.000 (50.8).97 (48.7) able Range TL II.530 (3.5).500 (2.7).405 (0.3).625 (5.9).605 (5.4).530 (3.5).405 (0.3).8 (2.0).055 (26.8).000 (25.4).900 (.9).750 (9.).09 (.2).000 (25.4).375 (34.9).30 (33.3).230 (3.2).80 (30.0).53 (38.9).445 (.7).375 (34.9).825 (46.4).730 (43.9).656 (42.) 2.062 (52.4).984 (50.4).900 (48.3).825 (46.4).730 (43.9) 2.375 (60.3) 2.250 (57.2) 2.45 (54.5) 2.062 (52.4) 3.80 (96.8) 3.8 (82.5) 3.80 (96.8) 4.0 (02.2) 3.72 (94.3) 3.72 (94.3) 3.72 (94.3) 4.087 (03.8) 4. (07.0) 4. (07.0) 4.50 (05.4) 4.50 (05.4) 4. (07.0) 4. (07.0) 4.275 (08.6) 4.275 (08.6) 4.275 (08.6) 4.275 (08.6) 4.337 (0.2) 4.337 (0.2) 4.337 (0.2) 4.704 (9.5) 4.704 (9.5) 4.399 (.7) 4.704 (9.5) 4.673 (8.7) 4.673 (8.7) 4.673 (8.7) 4.673 (8.7) 5.000 (27.0) 5.000 (27.0) 4.939 (25.5) 4.939 (25.5) ppr. ree Length 4.688 (9.) 4.344 (0.3) 3.688 (93.7) 6.88 (57.2) 5.88 (3.8) 4.688 (9.) 3.688 (93.7) 6.688 (69.9) 7.688 (95.3) 7.88 (82.6) 7.88 (82.6) 7.88 (82.6) 7.688 (95.3) 7.88 (82.6) 9.688 (6.) 8.688 (2.7) 8.88 (8.0) 8.88 (8.0) 0.688 (27.5) 9.688 (6.) 9.688 (6.) 3.688 (347.7) 3.688 (347.7) 2.688 (3.3) 4.88 (0.4) 3.688 (347.7) 3.688 (347.7) 3.688 (347.7) 3.688 (347.7) 8.88 (462.0) 7.88 (4.6) 4.88 (0.4) 4.88 (0.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-3
nvironmental ackshells lenair onnector Designator MIL--992 lasses, J, and R S85049/5 Style nvironmental ackshells M85049/5 W 0 ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Style Type ( or ) Dash Number (Table II) Note 4.50 (38.) H 2 8 40 J Thread TYP - Plug ap or use with MS7344 lass 2-LH.7500 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.6250-6 UN Dia ±.05 (.4).933 (23.7).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.870 (72.9) J Thread TL I Dia.094 (27.8).469 (37.3).562 (39.7).688 (42.9).938 (49.2) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. pprox. hain Lengths: Dash No. -9 = 5.0 (27.0); Dash No. 0-46 = 6.0 (52.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-4 TYP - Receptacle ap or use with MS7343, MS7345, and MS7347 H.765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 2.750-0.P-0.2L-DS
S85049/5 Style nvironmental ackshells nvironmental ackshells Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 2 8 8 8 8 8 40 40 40 40 3.82 (80.8) 3.90 (99.) 3.9 (99.9) 3.90 (99.) 4.77 (06.) 4.77 (06.) 4.489 (4.0) 4.489 (4.0) 4.306 (09.4) 4.584 (6.4) 4.306 (09.4) 4.584 (6.4) 4.647 (8.0) 4.647 (8.0) 4.647 (8.0) 4.647 (8.0) 4.542 (5.4) 4.647 (8.0) 4.896 (.4) 4.896 (.4) 4.647 (8.0) 4.9 (07.4) 4.647 (8.0) 4.896 (.4) 4.43 (2.5) 4.647 (8.0) 4.896 (.4) 4.959 (26.0) 4.647 (8.0) 4.896 (.4) 4.896 (.4) 4.647 (8.0) 4.276 (08.6) 4.43 (2.5) 4.959 (26.0) 4.959 (26.0) 4.896 (.4) 5.02 (27.5) 4.959 (26.0) 5.02 (27.5) 4.65 (8.) 4.959 (26.0) 6.354 (6.4) 6.354 (6.4) 6.354 (6.4) 6.057 (53.8) TL II ±.03 (.8).938 (23.8).062 (27.0).25 (.6).062 (27.0).375 (34.9).375 (34.9).562 (39.7).562 (39.7).375 (34.9).688 (42.9).375 (34.9).688 (42.9).82 (46.0).82 (46.0).82 (46.0).82 (46.0).688 (42.9).82 (46.0) 2.25 (54.0) 2.25 (54.0).82 (46.0).25 (.6).82 (46.0) 2.25 (54.0).375 (34.9).82 (46.0) 2.25 (54.0) 2.469 (62.7).82 (46.0) 2.25 (54.0) 2.25 (54.0).82 (46.0).25 (.6).375 (34.9) 2.469 (62.7) 2.469 (62.7) 2.25 (54.0) 2.625 (66.7) 2.469 (62.7) 2.625 (66.7).82 (46.0) 2.469 (62.7) 3.7 (80.5) 3.7 (80.5) 3.7 (80.5) 2.953 (75.0) able Range Min.56 (4.0). (7.).375 (9.5). (7.).375 (9.5).88 (4.8). (7.).5 (3.0).4 (.).605 (5.4).605 (5.4).530 (3.5).699 (7.8). (9.2).455 (.6).5 (3.0).449 (.4).605 (5.4).562 (4.3).3 (7.9).405 (0.3).75 (8.2).787 (.0).57 (3.).637 (6.2).857 (2.8).75 (8.2).692 (7.6).755 (9.2).984 (25.0).637 (6.2).8 (2.0).900 (.9).630 (6.0).750 (9.).970 (.6).8 (2.0).805 (.4).880 (.4).09 (.2).750 (9.). (7.).375 (9.5).857 (2.8).875 (.2).4 (.).567 (4.4).930 (23.6).05 (.).637 (6.2).755 (9.2).984 (25.0).857 (2.8).970 (.6).000 (25.4).530 (3.5).680 (7.3).055 (26.8).230 (3.2).750 (9.).880 (.4).09 (.2).970 (.6). (7.).375 (9.5).4 (.).005 (25.5).85 (30.).984 (25.0).250 (3.8).055 (26.8).3 (33.5).857 (2.8).05 (.).85 (46.).700 (43.2).605 (40.8).53 (38.9).530 (3.5).30 (.7).30 (33.3).09 (.2).375 (34.9).80 (30.0).445 (.7).970 (.6).230 (3.2).940 (49.3).825 (46.4).730 (43.9).656 (42.) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-5
nvironmental ackshells S85049/5 Style 2 nvironmental ackshells lenair onnector Designator M85049/5 W 0 2 Style 2 MIL--992 lasses, J, and R ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Type ( or ) Dash Number (Table II) Note 4.50 (38.) H J Thread J Thread TYP - Plug ap or use with MS7344 TYP - Receptacle ap or use with MS7343, MS7345, and MS7347 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-6
S85049/5 Style 2 nvironmental ackshells nvironmental ackshells 2 4 6 8 40 lass 2-LH.7500 - UN.8750 - UN.0000 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.6250-6 UN Dia ±.05 (.4).933 (23.7).057 (26.8).83 (30.0).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.870 (72.9) TL I 4.000 (0.6) 4.00 (04.) 4.400 (.8) 4.600 (6.8) 4.900 (.5) 4.900 (.5) 5.000 (27.0) 5.300 (34.6) 5.600 (42.2) 5.600 (42.2) 5.725 (45.4) Dia.094 (27.8).29 (3.0).344 (34.).469 (37.3).562 (39.7).688 (42.9).938 (49.2) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) H.765 (9.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.000-0.P-0.2L-DS.25-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 2.750-0.P-0.2L-DS Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 4 6 8 8 40 40 ±.005 (.).969 (.6).094 (27.8).29 (3.0).344 (34.).344 (34.).469 (37.3).469 (37.3).625 (4.3).625 (4.3).625 (4.3).750 (44.5).750 (44.5) 2.000 (50.8) 2.000 (50.8) 2.250 (57.2) 2.250 (57.2) 2.500 (63.5) 2.500 (63.5) 2.750 (69.9) 2.750 (69.9) TL II able Range Min.30 (3.3).0 (7.).6 (6.2).396 (0.). (8.2).52 (3.2).446 (.3).646 (6.4).300 (7.6).475 (2.).565 (4.4).400 (0.2).690 (7.5).500 (2.7).400 (0.2).85 (.7).595 (5.).980 (.9).780 (9.8).230 (3.2).030 (26.2).470 (37.3).270 (.3).660 (42.2).400 (35.6).765 (9.4).600 (5.2).890 (.6).700 (7.8).525 (3.3).05 (25.8).85 (.7).80 (30.0).980 (.9).430 (.3).230 (3.2).670 (42.4).470 (37.3).860 (47.2).660 (42.2). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. pprox. hain Lengths: Dash No. -7 = 5.0 (27.0) Dash No. 8- = 6.0 (52.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-7
nvironmental ackshells lenair onnector Designator S85049/5 Style 3 nvironmental ackshells M85049/5 W 0 3 Style 3 MIL--992 lasses, J, and R ody and ap inish = nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Type ( or ) Dash Number (Table II) Note 4.50 (38.) H 2 8 40 J Thread J Thread TYP - Plug ap or use with MS7344 TYP - Receptacle ap or use with MS7343, MS7345, and MS7347 Dia TL I Dia H ±.05 (.4).933 (23.7).307 (33.2).433 (.4).557 (39.5).807 (45.9) 2.057 (52.2) 2.307 (58.6) 2.557 (64.9) 2.875 (73.0).094 (27.8).469 (37.3).562 (39.7).688 (42.9).938 (49.2) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) lass 2-LH.7500 - UN.250-8 UN.2500-8 UN.3750-8 UN.6250-8 UN.8750-6 UN 2.0625-6 UNS 2.5-6 UNS 2.6250-6 UN J Thread (plated) lass 2 ( or ) 0.875-0.P-0.2L-DS.250-0.P-0.2L-DS.375-0.P-0.2L-DS.500-0.P-0.2L-DS.750-0.P-0.2L-DS 2.000-0.P-0.2L-DS 2.250-0.P-0.2L-DS 2.500-0.P-0.2L-DS 2.750-0.P-0.2L-DS 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-8
S85049/5 Style 3 nvironmental ackshells nvironmental ackshells Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 2 8 8 8 8 40 40 40 40 Min.60 (4.).5 (3.0).4 (.).306 (7.8).29 (5.6).605 (5.4).5 (3.0). (9.2).75 (8.2).449 (.4). (8.0).692 (7.6).637 (6.2).57 (3.).984 (25.0).875 (.2).755 (9.2).637 (6.2).567 (4.4).4 (.).306 (7.8).05 (.).005 (25.5).930 (23.6).857 (2.8).755 (9.2).637 (6.2).4 (.).306 (7.8).3 (33.5).250 (3.8).85 (30.).05 (.).055 (26.8).984 (25.0).857 (2.8).85 (46.).700 (43.2).605 (40.8).53 (38.9) able Range TL II.2 (5.6).605 (5.4).530 (3.5).375 (9.5). (7.).699 (7.8).605 (5.4).455 (.6).8 (2.0).562 (4.3).405 (0.3).805 (.4).750 (9.).630 (6.0).09 (.2).000 (25.4).880 (.4).750 (9.).680 (7.3).530 (3.5).375 (9.5).230 (3.2).30 (.7).055 (26.8).970 (.6).880 (.4).750 (9.).530 (3.5).375 (9.5).445 (.7).375 (34.9).30 (33.3).230 (3.2).80 (30.0).09 (.2).970 (.6).940 (49.3).825 (46.4).730 (43.9).656 (42.) 2.752 (69.9) 3.72 (94.3) 3.72 (94.3) 3.502 (89.0) 3.47 (88.2) 4.0 (02.2) 3.84 (97.6) 4.0 (02.2) 4.087 (03.8) 4.087 (03.8) 3.84 (97.6) 4.50 (05.4) 4.50 (05.4) 4.50 (05.4) 4. (07.0) 4. (07.0) 4. (07.0) 4.50 (05.4) 4.50 (05.4) 3.966 (00.7) 3.799 (96.5) 4.275 (08.6) 4.275 (08.6) 4. (07.0) 4.50 (05.4) 4. (07.0) 4.50 (05.4) 3.966 (00.7) 3.846 (97.7) 4.337 (0.2) 4.337 (0.2) 4.275 (08.6) 4.275 (08.6) 4.275 (08.6) 4. (07.0) 4.54 (05.5) 5.673 (44.) 5.673 (44.) 5.673 (44.) 5.373 (.5) ppr. ree Length 2.406 (6.) 5.88 (3.8) 4.688 (9.) 3.844 (97.6) 2.844 (72.2) 6.88 (57.2) 5.88 (3.8) 4.88 (06.4) 6.688 (69.9) 5.88 (3.8) 3.688 (93.7) 6.688 (69.9) 6.688 (69.9) 5.688 (44.5) 7.688 (95.3) 7.88 (82.6) 6.688 (69.9) 6.688 (69.9) 6.688 (69.9) 4.688 (9.) 3.844 (97.6) 8.88 (8.0) 7.88 (82.6) 7.688 (95.3) 7.88 (82.6) 6.688 (69.9) 6.688 (69.9) 4.688 (9.) 3.844 (97.6) 9.688 (6.) 9.688 (6.) 8.688 (2.7) 8.88 (8.0) 8.88 (8.0) 7.688 (95.3) 7.88 (82.6) 3.688 (347.7) 3.688 (347.7) 3.688 (347.7) 2.688 (3.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. pprox. hain Lengths: Dash No. -8 = 5.0 (27.0) Dash No. 9-40 = 6.0 (52.4). 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-9
nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 M85049/7-2 N Dash No. Dash No. (Table I, Page 37-) S85049/7 and MS389 nvironmental ackshells MS389 2 N inish and Material = lack admium, Stainless Steel N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hr. ad. Olive Drab Over lectroless Nickel Superceded Part Number inish (Material is luminum Only) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel (Table I, Page 37-) STYL 2. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. K able Range L Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 03 03 08 0 0 2 2 2 4 4 6 6 8 8.688 (7.5).500 (38.).625 (5.9).688 (7.5).688 (7.5).750 (9.).750 (9.).750 (9.).82 (.6).82 (.6).906 (23.0).906 (23.0).093 (27.8).093 (27.8).093 (27.8).093 (27.8).88 (30.2).88 (30.2).88 (30.2).88 (30.2). (33.3).852 (47.0).972 (50.).4 (3.6).92 (48.6).307 (33.2).972 (50.).972 (50.).972 (50.) 2.062 (52.4).77 (43.6) 2.72 (55.2).82 (46.0) 2.2 (60.0) 2.000 (50.8) 2.2 (60.0) 2.000 (50.8) 2.52 (63.8) 2.55 (54.7) 2.52 (63.8) 2.55 (54.7) 2.562 (65.) TL II K Ref..027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).027 (26.).56 (29.4).027 (26.).56 (29.4).059 (26.9).375 (34.9).059 (26.9).375 (34.9).56 (33.7) L.957 (.3).45 (29.).957 (.3).957 (.3).45 (29.).957 (.3).45 (29.).3 (33.8).45 (29.).3 (33.8).45 (29.).55 (39.4).3 (33.8).770 (45.0).3 (33.8).770 (45.0).55 (39.4) 2.3 (53.7).55 (39.4) 2.3 (53.7).770 (45.0) able Range M85049/42 Min.25 (3.2) Ref 4.437 (.) 6.25 (3.2) 4.25 (3.2). (7.9) 4.375 (9.5) 6.25 (3.2). (7.9) 4.437 (.) 6.350 (8.9).500 (2.7) 0.437 (.) 6.350 (8.9).575 (4.6) 0.437 (.) 6.500 (2.7).700 (7.8) 2.350 (8.9).625 (5.9) 0.625 (5.9).779 (9.8) 6.350 (8.9).625 (5.9) 0.625 (5.9).904 (23.0) 6.500 (2.7).750 (9.) 2.875 (.2).029 (26.).500 (2.7).750 (9.) 2.875 (.2).44 (29.).625 (5.9).937 (23.8) 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-
S85049/7 and MS389 nvironmental ackshells nvironmental ackshells TL II (ontinued) Dash K L able Range M85049/42 No. Ref. Min Ref. (33.3) 2. (56.3).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 23.375 (34.9) 2.662 (67.6).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6.375 (34.9) 2.662 (67.6).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 25.375 (34.9) 2. (58.7).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 26.406 (35.7) 2.752 (69.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 27.406 (35.7) 2.752 (69.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9).406 (35.7) 2.406 (6.).830 (46.5) 3.0 (76.7).437 (.5).840 (46.7) 29 40 2.56 (54.8) 2.752 (69.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 30 40 2.56 (54.8) 2.752 (69.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 3 40 2.56 (54.8) 2.406 (6.).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 44 2.56 (54.8) 2.752 (69.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 33 44 2.56 (54.8) 2.752 (69.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 34 44 2.56 (54.8) 2.406 (6.).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 35 48 2.56 (54.8) 2.752 (69.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 48 2.56 (54.8) 2.752 (69.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 37 48 2.56 (54.8) 2.406 (6.).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 38 6.88 (30.2) 2.52 (63.8).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 39 6.88 (30.2) 2.55 (54.7).375 (34.9) 2.3 (53.7).875 (.2).84 (30.) 40 6.906 (23.0) 2.72 (55.2).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 4 8.093 (27.8) 2.2 (60.0).027 (26.).957 (.3).25 (3.2). (7.9) 4 42 8.093 (27.8) 2.2 (60.0).027 (26.).45 (29.).437 (.) 6 43.093 (27.8) 2.2 (60.0).027 (26.).45 (29.).437 (.) 6 44.88 (30.2) 2.52 (63.8).027 (26.).957 (.3).25 (3.2). (7.9) 4 45.88 (30.2) 2.52 (63.8).027 (26.).45 (29.).437 (.) 6 46.88 (30.2) 2.52 (63.8).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 47.406 (35.7) 2.752 (69.9).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 48 40 2.56 (54.8) 2.752 (69.9).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 49* 0.500 (38.).972 (50.).027 (26.).45 (29.).437 (.) 6 50* 4.842 (46.8) 2.2 (60.0).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 5* 6.938 (49.2) 2.52 (63.8).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 52 8.093 (27.8) 2.2 (60.0).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 53 6.88 (30.2) 2.52 (63.8).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 54.093 (27.8) 2.2 (60.0).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 55* 2.06 (52.3) 2.562 (65.).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 56.88 (30.2) 2.52 (63.8).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 57.88 (30.2) 2.52 (63.8).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 58* 2.06 (52.3) 2.562 (65.).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 59.88 (30.2) 2.52 (63.8).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 60. (33.3) 2.562 (65.).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 6. (33.3) 2.562 (65.).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 62.375 (34.9) 2.662 (67.6).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 63.406 (35.7) 2.752 (69.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 64.406 (35.7) 2.752 (69.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 65 40 2.56 (54.8) 2.752 (69.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 66 40 2.56 (54.8) 2.752 (69.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 67 44 2.56 (54.8) 2.752 (69.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 68 44 2.56 (54.8) 2.752 (69.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 69 48 2.56 (54.8) 2.752 (69.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 70 48 2.56 (54.8) 2.752 (69.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 7* 2.654 (42.0) 2.73 (55.2).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 72* 8.938 (49.2) 2.52 (63.8).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 73* 2.06 (52.3) 2.562 (65.).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 74 4.82 (.6) 2.062 (52.4).027 (26.).957 (.3).25 (3.2). (7.9) 4 75 6.906 (23.0) 2.72 (55.2).027 (26.).957 (.3).25 (3.2). (7.9) 4 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 * Denotes Style 2 37-2
nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 STYL 2 (Table I, Page 37-) (Table I, Page 37-) S85049/9 and MS388 nvironmental ackshells H able Range L J M85049/9-2 N Dash No. inish and Material = lack admium, Stainless Steel N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour admium Olive Drab Over lectroless Nickel, luminum K Superceded Part Number MS388 2 N Dash No. inish (Material is luminum Only) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 03 03 08 0 0 2 2 2 4 4 6 6 8 8 H.76 (9.3).5 (38.4).666 (6.9).76 (9.3).76 (9.3).766 (9.5).766 (9.5).766 (9.5).866 (.0).866 (.0).05 (26.7).05 (26.7).4 (29.0).4 (29.0).4 (29.0).4 (29.0).29 (.8).29 (.8).29 (.8).29 (.8).39 (35.3) J.862 (47.3).382 (35.).262 (.).982 (50.3).382 (35.) 2.002 (50.9) 2.002 (50.9).397 (35.5) 2.072 (52.6).77 (43.6) 2.62 (54.9).807 (45.9) 2.3 (59.2).982 (50.3) 2.3 (59.2).982 (50.3) 2.442 (62.0) 2.087 (53.0) 2.442 (62.0) 2.087 (53.0) 2.62 (66.3) TL II K Ref..027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).027 (26.).56 (29.4).027 (26.).56 (29.4).059 (26.9).375 (34.9).059 (26.9).375 (34.9).56 (33.7) L.957 (.3).45 (29.).957 (.3).957 (.3).45 (29.).957 (.3).45 (29.).3 (33.8).45 (29.).3 (33.8).45 (29.).55 (39.4).3 (33.8).770 (45.0).3 (33.8).770 (45.0).55 (39.4) 2.3 (53.7).55 (39.4) 2.3 (53.7).770 (45.0) able Range Min.25 (3.2).25 (3.2).25 (3.2).25 (3.2).350 (8.9).350 (8.9).500 (2.7).350 (8.9).625 (5.9).350 (8.9).625 (5.9).500 (2.7).875 (.2).500 (2.7).875 (.2).625 (5.9).437 (.). (7.9).375 (9.5). (7.9).437 (.).500 (2.7).437 (.).575 (4.6).437 (.).700 (7.8).625 (5.9).779 (9.8).625 (5.9).904 (23.0).750 (9.).029 (26.).750 (9.).44 (29.).937 (23.8) M85049/42 Ref 4 6 4 4 6 4 6 0 6 0 6 2 0 6 0 6 2 2 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-
S85049/9 and MS388 nvironmental ackshells nvironmental ackshells TL II (ontinued) Dash H J K L able Range M85049/42 No. Ref. Min Ref.39 (35.3) 2.257 (57.3).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 23.74 (44.2) 2.862 (72.7).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6.74 (44.2) 2.862 (72.7).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 25.74 (44.2) 2.507 (63.7).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 26.94 (49.3) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 27.94 (49.3) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9).94 (49.3) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).840 (46.7) 29 40 2.69 (68.4) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 30 40 2.69 (68.4) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 3 40 2.69 (68.4) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 44 2.69 (68.4) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 33 44 2.69 (68.4) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 34 44 2.69 (68.4) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 35 48 2.69 (68.4) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 48 2.69 (68.4) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 37 48 2.69 (68.4) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 38 6.29 (.8) 2.442 (62.0).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 39 6.29 (.8) 2.087 (53.0).375 (34.9) 2.3 (53.7).875 (.2).84 (30.) 40 6.05 (26.7) 2.62 (54.9).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 4 8.4 (29.0) 2.3 (59.2).027 (26.).957 (.3).25 (3.2). (7.9) 4 42 8.4 (29.0) 2.3 (59.2).027 (26.).45 (29.).437 (.) 6 43.4 (29.0) 2.3 (59.2).027 (26.).45 (29.).437 (.) 6 44.29 (.8) 2.442 (62.0).027 (26.).957 (.3).25 (3.2). (7.9) 4 45.29 (.8) 2.442 (62.0).027 (26.).45 (29.).437 (.) 6 46.29 (.8) 2.442 (62.0).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 47.94 (49.3) 2.8 (7.9).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 48 40.94 (49.3) 2.8 (7.9).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 49* 0.56 (38.5) 2.002 (50.9).027 (26.).45 (29.).437 (.) 6 50* 4.89 (48.0) 2.3 (59.2).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 5* 6 2.04 (5.8) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 52 8.4 (29.0) 2.3 (59.2).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 53 6.29 (.8) 2.087 (53.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 54.4 (29.0) 2.3 (59.2).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 55* 2.4 (54.4) 2.62 (66.3).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 56.29 (.8) 2.442 (62.0).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 57.29 (.8) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 58* 2.4 (54.4) 2.62 (66.3).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 59.29 (.8) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 60.39 (35.3) 2.62 (66.3).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 6.39 (35.3) 2.62 (66.3).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 62.74 (44.2) 2.862 (72.7).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 63.94 (49.3) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 64.94 (49.3) 2.8 (7.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 65 40 2.69 (68.4) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 66 40 2.69 (68.4) 2.8 (7.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 67 44 2.69 (68.4) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 68 44 2.69 (68.4) 2.8 (7.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 69 48 2.69 (68.4) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 70 48 2.69 (68.4) 2.8 (7.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 7* 2.8 (46.0) 2.62 (54.9).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 72* 8 2.05 (52.) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 73* 2.5 (54.6) 2.62 (66.3).375 (34.9) 2.6 (53.7).875 (.2).250 (3.8) 74 4.866 (.0) 2.072 (52.6).027 (26.).957 (.3).25 (3.2). (7.9) 4 75 6.05 (26.7) 2.62 (54.9).027 (26.).957 (.3).25 (3.2). (7.9) 4 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 * Denotes Style 2 37-23
nvironmental ackshells S85049/ and MS3437 nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 M85049/-2 N inish and Material = lack admium, Stainless Steel Dash No. (Table II) N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour admium Olive Drab Over lectroless Nickel, luminum Dash No. (Table II) MS3437 2 N Superceded Part Number inish (Material is luminum Only) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel K able Range L STYL 2 STYL 3 8 0 2 4 6 8 40 44 48 6 TL I lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN Dia.669 (7.0).67 (5.7).734 (8.6).858 (2.8).984 (25.0).2 (.2). (30.9).345 (34.2).468 (37.3).593 (40.5).969 (50.0) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) 3.29 (8.8).653 (42.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. When maximum cable entry is exceeded, Style 2 will be supplied. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-
S85049/ and MS3437 nvironmental ackshells nvironmental ackshells Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 49 50 5 52 3 3 3 3 8 8 8 8 0 0 0 0 2 2 2 2 4 4 4 4 6 6 6 6 8 8 8 8 8 8 Style 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.875 (98.4) 4.875 (23.8) 3.875 (98.4) 4.875 (23.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.875 (98.4) 4.875 (23.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) K Ref..027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).059 (26.9).059 (26.9).059 (26.9).56 (29.4).56 (29.4).027 (26.).027 (26.).059 (26.9).059 (26.9).56 (29.4).56 (29.4).027 (26.).027 (26.).059 (26.9).059 (26.9).56 (29.4).56 (29.4).375 (34.9).375 (34.9).027 (26.).027 (26.).059 (26.9).059 (26.9).56 (29.4).56 (29.4).375 (34.9).375 (34.9).059 (26.9).059 (26.9).56 (29.4).56 (29.4).56 (29.4).56 (29.4) TL II L.957 (.3).957 (.3).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).45 (29.).45 (29.).3 (33.8).3 (33.8).3 (33.8).3 (33.8).55 (39.4).55 (39.4).55 (39.4).55 (39.4).770 (45.0).770 (45.0).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7).55 (39.4).55 (39.4).770 (45.0).770 (45.0).770 (45.0).770 (45.0) Table continued on the next page. Min.25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).350 (8.9).350 (8.9).350 (8.9).350 (8.9).500 (2.7).500 (2.7).500 (2.7).500 (2.7).625 (5.9).625 (5.9).350 (8.9).350 (8.9).500 (2.7).500 (2.7).625 (5.9).625 (5.9).350 (8.9).350 (8.9).500 (2.7).500 (2.7).625 (5.9).625 (5.9).875 (.2).875 (.2).350 (8.9).350 (8.9).500 (2.7).500 (2.7).625 (5.9).625 (5.9).875 (.2).875 (.2).500 (2.7).500 (2.7).625 (5.9).625 (5.9).625 (5.9).625 (5.9) able Range.437 (.).437 (.).437 (.).437 (.). (7.9). (7.9).437 (.).437 (.).437 (.).437 (.).625 (5.9).625 (5.9).575 (4.6).575 (4.6).750 (9.).750 (9.).700 (7.8).700 (7.8).937 (23.8).937 (23.8).625 (5.9).625 (5.9).750 (9.).750 (9.).937 (23.8).937 (23.8).625 (5.9).625 (5.9).750 (9.).750 (9.).937 (23.8).937 (23.8).250 (3.8).250 (3.8).625 (5.9).625 (5.9).750 (9.).750 (9.).937 (23.8).937 (23.8).250 (3.8).250 (3.8).750 (9.).750 (9.).82 (.6).82 (.6).937 (23.8).937 (23.8) M85049/42 Ref 4 4 6 6 4 4 6 6 4 4 6 6 6 6 0 0 0 0 2 2 2 2 6 6 0 0 2 2 6 6 0 0 2 2 6 6 0 0 2 2 6 6 2 2 6 6 6 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-25
nvironmental ackshells S85049/ and MS3437 nvironmental ackshells Dash No. 53 54 55 56 57 58 59 60 6 62 63 64 65 66 67 68 69 70 7 72 73 74 75 76 77 78 79 80 8 82 83 84 85 86 87 88 89 90 9 92 93 94 95 96 97 98 99 00 0 02 03 04 40 40 40 40 40 40 40 40 44 44 44 44 44 44 44 44 48 48 48 48 48 48 48 48 6 6 Style 2 2 2 2 3.875 (98.4) 4.875 (23.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 5.000 (27.0) 6.000 (52.4) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 3.25 (79.4) 4.25 (04.8) TL II (ontinued) K Ref. L.375 (34.9) 2.3 (53.7).375 (34.9) 2.3 (53.7).059 (26.9).55 (39.4).059 (26.9).55 (39.4).56 (29.4).770 (45.0).56 (29.4).770 (45.0).375 (34.9) 2.3 (53.7).375 (34.9) 2.3 (53.7).500 (38.) 2.3 (60.0).500 (38.) 2.3 (60.0).56 (29.4).770 (45.0).56 (29.4).770 (45.0).375 (34.9) 2.3 (53.7).375 (34.9) 2.3 (53.7).500 (38.) 2.3 (60.0).500 (38.) 2.3 (60.0).78 (45.2) 2.770 (70.4).78 (45.2) 2.770 (70.4).375 (34.9) 2.3 (53.7).375 (34.9) 2.3 (53.7).500 (38.) 2.3 (60.0).500 (38.) 2.3 (60.0).78 (45.2) 2.770 (70.4).78 (45.2) 2.770 (70.4).830 (46.5) 3.0 (76.7).830 (46.5) 3.0 (76.7).375 (34.9) 2.3 (53.7).375 (34.9) 2.3 (53.7).500 (38.) 2.3 (60.0).500 (38.) 2.3 (60.0).78 (45.2) 2.770 (70.4).78 (45.2) 2.770 (70.4).830 (46.5) 3.0 (76.7).830 (46.5) 3.0 (76.7).375 (34.9) 2.3 (53.7).375 (34.9) 2.3 (53.7).500 (38.) 2.3 (60.0).500 (38.) 2.3 (60.0).78 (45.2) 2.770 (70.4).78 (45.2) 2.770 (70.4).830 (46.5) 3.0 (76.7).830 (46.5) 3.0 (76.7).375 (34.9) 2.3 (53.7).375 (34.9) 2.3 (53.7).500 (38.) 2.3 (60.0).500 (38.) 2.3 (60.0).78 (45.2) 2.770 (70.4).78 (45.2) 2.770 (70.4).830 (46.5) 3.0 (76.7).830 (46.5) 3.0 (76.7).059 (26.9).55 (39.4).059 (26.9).55 (39.4) Table continued on the next page. Min.875 (.2).875 (.2).500 (2.7).500 (2.7).625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).500 (2.7).500 (2.7) able Range.250 (3.8).250 (3.8).750 (9.).750 (9.).937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).750 (9.).750 (9.) M85049/42 Ref 2 2 6 6 6 6 2 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-26
S85049/ and MS3437 nvironmental ackshells nvironmental ackshells Dash No. 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 49 50 5 52 53 54 55 56 57 6 6 6 6 6 6 2 6 6 2 2 4 4 6 6 8 8 8 8 40 40 0 0 2 2 4 4 6 6 44 44 40 40 Style 2 2 2 2 3.25 (79.4) 4.25 (04.8) 3.875 (98.4) 4.875 (23.8) 3.875 (98.4) 4.875 (23.8) 2.25 (54.0) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) TL II (ontinued) K Ref..56 (29.4).56 (29.4).375 (34.9).375 (34.9).500 (38.).500 (38.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).059 (26.9).059 (26.9).059 (26.9).027 (26.).027 (26.).027 (26.).027 (26.).56 (29.4).56 (29.4).375 (34.9).375 (34.9).375 (34.9).375 (34.9).830 (46.5).830 (46.5).56 (29.4).56 (29.4).027 (26.).027 (26.).027 (26.).027 (26.).56 (29.4).56 (29.4).56 (29.4).56 (29.4) L.770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0).3 (33.8).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).3 (33.8).3 (33.8).957 (.3).957 (.3).45 (29.).45 (29.).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).3 (33.8).3 (33.8).55 (39.4).55 (39.4).55 (39.4).55 (39.4).45 (29.).45 (29.).3 (33.8).3 (33.8).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (53.7) 2.3 (53.7) 3.0 (76.7) 3.0 (76.7).770 (45.0).770 (45.0).957 (.3).957 (.3).957 (.3).957 (.3).770 (45.0).770 (45.0).770 (45.0).770 (45.0) able Range Min.625 (5.9).937 (23.8).625 (5.9).937 (23.8).875 (.2).250 (3.8).875 (.2).250 (3.8).000 (25.4).375 (34.9).000 (25.4).375 (34.9).350 (8.9).500 (2.7).437 (.).437 (.).25 (3.2). (7.9).25 (3.2). (7.9).437 (.).437 (.).350 (8.9).625 (5.9).350 (8.9).625 (5.9).25 (3.2). (7.9).25 (3.2). (7.9).437 (.).437 (.).437 (.).437 (.).25 (3.2). (7.9).25 (3.2). (7.9).437 (.).437 (.).350 (8.9).625 (5.9).350 (8.9).625 (5.9).500 (2.7).750 (9.).500 (2.7).750 (9.).500 (2.7).750 (9.).500 (2.7).750 (9.).375 (9.5).375 (9.5).350 (8.9).500 (2.7).350 (8.9).500 (2.7).625 (5.9).904 (23.0).625 (5.9).904 (23.0).875 (.2).029 (26.).875 (.2).029 (26.).875 (.2).44 (29.).875 (.2).44 (29.).437 (.5).840 (46.7).437 (.5).840 (46.7).625 (5.9).937 (23.8).625 (5.9).937 (23.8).25 (3.2). (7.9).25 (3.2). (7.9).25 (3.2). (7.9).25 (3.2). (7.9).625 (5.9).937 (23.8).625 (5.9).937 (23.8).625 (5.9).937 (23.8).625 (5.9).937 (23.8) M85049/42 Ref 6 6 0 6 6 4 4 6 6 0 0 4 4 6 6 6 6 4 4 6 6 0 0 2 2 2 2 6 6 0 0 6 6 6 6 4 4 4 4 6 6 6 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 37-27
If "on time" is a promise you hope your vendors will keep... M...your best hope is to place your orders with lenair. ost interconnect accessory suppliers quote several months or more to make a backshell. t lenair, we not only quote the shortest lead times in our industry generally 2-3 weeks we also do the best job by far of getting the work out when we say we will. While it's true we can t promise we ll always make our dates, we're confident we ll be way ahead of whoever s in second place when it comes to on-time delivery. nd for those jobs which can't wait even 2-3 weeks, we offer over 35,000 part numbers in stock and ready for same-day shipment. ommercial and Mil Spec connector accessories onvoluted tubing and metal-core conduit lectrical and fiber optic cable assemblies omposite thermoplastic components Microminiature connectors and accessories ackshell assembly and termination tools 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany rance Nordic Italy Spain
MI/RI Non-nvironmental ackshells MI/RI Non-nv. ackshells choice of 0 shield/screen terminations are offered in straight and angled backshells, and include designs to accommodate combinations of individual or overall shields or screens. ll designs included in this section provide low dc resistance across the termination area. lenair s lenair Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS388 M85049/ 38000 90 ackshell 38-8 MS389 M85049/23 38000 45 ackshell 38-6 MS3437 M85049/25 380S00 Straight ackshell 38-0 M38999/7 M85049/ 380S008 Straight ackshell 38-4* M38999/8 M85049/37 380D007 90 ackshell 38-5* M85/4 (,D) 380JS008 Straight ackshell J 38-2 S85049/9 380HS007 Straight ackshell H 38-5 S85049/23 38000 45 ackshell 38-6 S85049/ 38000 90 ackshell 38-8 S85049/25 380S00 Straight ackshell 38-0 S85049/ 380S008 Straight ackshell 38-4 S85049/37 380D007 90 ackshell 38-5 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-
MI/RI Non-nv. ackshells M85/4 unctions and D RI Non-nvironmental ackshells lenair onnector Designator J MIL--85 Typ. M85/4-00 Dash No. Inactive for New Design Length Ref. Length Ref. Dia Typ. able Range Typ. Dash No. 057 058 059 060 06 062 063 064 065 066 067 068 069 070 07 072 073 074 075 076 077 078 079 080 08 082 083 084 unction "" dapter ssembly 08 08 08 08 08 08 08 08 0 0 0 0 0 0 0 0 0 0 0 0 4 4 4 4 4 4 4 4 unction D D D D D D D D D D D D D lass 2.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN TL I Dia..555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6) Table I ontinued on Page 38-3. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. or unctions and see page 39-6. unction "D" dapter ssembly Length Ref..7 (43.4).7 (43.4) 2.47 (62.7) 2.47 (62.7) 2.2 (56.) 2.2 (56.) 2.97 (75.4) 2.97 (75.4).7 (43.4).7 (43.4).7 (43.4) 2.47 (62.7) 2.47 (62.7) 2.47 (62.7) 2.2 (56.) 2.2 (56.) 2.2 (56.) 2.97 (75.4) 2.97 (75.4) 2.97 (75.4).7 (43.4).7 (43.4).7 (43.4) 2.47 (62.7) 2.47 (62.7) 2.47 (62.7) 2.2 (56.) 2.2 (56.) Min.062 (.6).25 (3.2).062 (.6).25 (3.2).062 (.6).25 (3.2).062 (.6).25 (3.2).25 (3.2).375 (9.5).25 (3.2).375 (9.5).25 (3.2).375 (9.5).25 (3.2).375 (9.5).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5) able Range.25 (3.2).25 (3.2).25 (3.2).25 (3.2).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-2
M85/4 unctions and D RI Non-nvironmental ackshells MI/RI Non-nv. ackshells Dash No. 085 086 087 088 089 090 09 092 093 094 095 096 097 098 099 00 0 02 03 04 05 06 07 08 09 0 2 49 50 5 52 53 54 55 56 57 58 59 60 6 62 63 64 65 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 unction D D D D D D D D D D D D D D D D D D D D D D D TL I (ontinued rom Page 38-2) lass 2.875 - UN.875 - UN.875 - UN.875 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN Dia..930 (23.6).930 (23.6).930 (23.6).930 (23.6).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. or unctions and see page 39-6. Length Ref. 2.2 (56.) 2.97 (75.4) 2.97 (75.4) 2.97 (75.4).7 (43.4).7 (43.4).7 (43.4) 2.47 (62.7) 2.47 (62.7) 2.47 (62.7) 2.2 (56.) 2.2 (56.) 2.2 (56.) 2.97 (75.4) 2.97 (75.4) 2.97 (75.4).7 (43.4).7 (43.4).7 (43.4) 2.47 (62.7) 2.47 (62.7) 2.47 (62.7) 2.2 (56.) 2.2 (56.) 2.2 (56.) 2.97 (75.4) 2.97 (75.4) 2.97 (75.4).78 (45.2).78 (45.2).78 (45.2) 2.55 (64.8) 2.55 (64.8) 2.55 (64.8) 2. (57.9) 2. (57.9) 2. (57.9) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5).78 (45.2).78 (45.2).78 (45.2) 2.55 (64.8) 2.55 (64.8) Table I ontinued on Page 38-4 Min.500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).500 (2.7).625 (5.9).750 (9.).500 (2.7).625 (5.9).750 (9.).500 (2.7).625 (5.9).750 (9.).500 (2.7).625 (5.9).750 (9.).625 (5.9).750 (9.).875 (.2).625 (5.9).750 (9.) able Range.625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).500 (2.7).625 (5.9).750 (9.).500 (2.7).625 (5.9).750 (9.).500 (2.7).625 (5.9).750 (9.).500 (2.7).625 (5.9).750 (9.).625 (5.9).750 (9.).875 (.2).625 (5.9).750 (9.).875 (.2).625 (5.9).750 (9.).875 (.2).625 (5.9).750 (9.).875 (.2).750 (9.).875 (.2).000 (25.4).750 (9.).875 (.2) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-3
MI/RI Non-nv. ackshells M85/4 unctions and D RI Non-nvironmental ackshells Dash No. 7 72 73 74 75 76 77 78 79 80 8 82 83 84 66 67 68 69 70 unction D D D D D D D D D D TL I (ontinued rom Page 38-4) lass 2.375 - UN.375 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN Dia..430 (.3).430 (.3).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3) Length Ref. 3.05 (77.5) 3.05 (77.5).78 (45.2).78 (45.2).78 (45.2) 2.55 (64.8) 2.55 (64.8) 2.55 (64.8) 2. (57.9) 2. (57.9) 2. (57.9) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 2.55 (64.8) 2. (57.9) 2. (57.9) 2. (57.9) 3.05 (77.5) Min.750 (9.).875 (.2).750 (9.).875 (.2).000 (25.4).750 (9.).875 (.2).000 (25.4).750 (9.).875 (.2).000 (25.4).750 (9.).875 (.2).000 (25.4).875 (.2).625 (5.9).750 (9.).875 (.2).625 (5.9) able Range.875 (.2).000 (25.4).875 (.2).000 (25.4).25 (.6).875 (.2).000 (25.4).25 (.6).875 (.2).000 (25.4).25 (.6).875 (.2).000 (25.4).25 (.6).000 (25.4).750 (9.).875 (.2).000 (25.4).750 (9.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. or unctions and see page 39-6. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-4
S85049/9 MI/RI Non-nvironmental ackshells MI/RI Non-nv. ackshells lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/9 W 03 inish N = lectroless Nickel W =,000 Hour admium Olive Drab Over lectroless Nickel Length ode (Omit for Standard) lamp Length.350 (34.3) Dia able Range 9 3 5 7 9 2 23 25 lamp (Table II) Min 0 0 02 02 02 03 03 03 04 02 03 04 05 06 07 08 09 0 TL I lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.75 (9.).85 (2.6).00 (25.4).0 (27.9).25 (3.8).40 (35.6).50 (38.).65 (4.9).70 (43.2) lamp 0 02 03 04 05 06 07 08 09 0 Min.062 (.6).25 (3.2). (7.9).437 (.).562 (4.3).687 (7.4).82 (.6).937 (23.8).062 (27.0) TL II able Range.25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).80 (.3).00 (25.4).0 (27.9). (30.5).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5).90 (48.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Length ode Std. TL III vailable s 9-25 9-25 5-25 2-25 Length.500 (38.) 2.500 (63.5) 3.500 (88.9) 4.500 (4.3) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-5
MI/RI Non-nv. ackshells S85049/23 and MS389 MI/RI Non-nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 M85049/23-2 N Dash No. Dash No. MS389 2 N inish and Material = lack admium, Stainless Steel N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour admium Olive Drab Over lectroless Nickel, luminum Superceded Part Number inish (Material is luminum) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel STYL 2 (Table I, Page 38-0) K. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. TL II Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 3 3 8 0 0 2 2 2 4 4 6 6 8 8.687 (7.4).500 (38.).625 (5.9).687 (7.4).687 (7.4).750 (9.).750 (9.).750 (9.).82 (.6).82 (.6).906 (23.0).906 (23.0).093 (27.8).093 (27.8).093 (27.8).093 (27.8).88 (30.2).88 (30.2).88 (30.2).88 (30.2). (33.3).95 (48.6) 2.035 (5.7).307 (33.2).975 (50.2).370 (34.8) 2.035 (5.7) 2.035 (5.7) 2.035 (5.7) 2.25 (54.0).780 (45.2) 2.235 (56.8).875 (47.6) 2.425 (6.6) 2.062 (52.4) 2.425 (6.6) 2.062 (52.4) 2.575 (65.4) 2. (56.3) 2.575 (65.4) 2. (56.3) 2.625 (66.7) K Ref..027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).027 (26.).56 (29.4).027 (26.).56 (29.4).059 (26.9).375 (34.9).059 (26.9).375 (34.9).56 (33.7) L.957 (.3).45 (29.).957 (.3).957 (.3).45 (29.).957 (.3).45 (29.).3 (33.8).45 (29.).3 (33.8).45 (29.).55 (39.4).3 (33.8).770 (45.0).3 (33.8).770 (45.0).55 (39.4) 2.3 (53.7).55 (39.4) 2.3 (53.7).770 (45.0) Table I ontinued on Page 38-7 able Range L able Range Min.25 (3.2).25 (3.2).25 (3.2).25 (3.2).350 (8.9).350 (8.9).500 (2.7).350 (8.9).625 (5.9).350 (8.9).625 (5.9).500 (2.7).875 (.2).500 (2.7).875 (.2).625 (5.9).437 (.). (7.9).375 (9.5). (7.9).437 (.).500 (2.7).437 (.).575 (4.6).437 (.).700 (7.8).625 (5.9).779 (9.8).625 (5.9).904 (23.0).750 (9.).029 (26.).750 (9.).44 (29.).937 (23.8) M85049/42 Ref 4 6 4 4 6 4 6 0 6 0 6 2 0 6 0 6 2 2 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-6
S85049/23 and MS389 MI/RI Non-nvironmental ackshells MI/RI Non-nv. ackshells TL II (ontinued rom Page 38-6) Dash No. K Ref. L Min able Range M85049/42 Ref. (33.3) 2. (57.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 23.375 (34.9) 2.725 (69.2).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6.375 (34.9) 2.725 (69.2).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 25.375 (34.9) 2.500 (63.5).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 26.406 (35.7) 2.85 (7.5).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 27.406 (35.7) 2.85 (7.5).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9).406 (35.7) 2.469 (62.7).830 (46.5) 3.0 (76.7).437 (.5).840 (46.7) 29 40 2.56 (54.8) 2.85 (7.5).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 30 40 2.56 (54.8) 2.85 (7.5).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 3 40 2.56 (54.8) 2.469 (62.7).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 44 2.56 (54.8) 2.85 (7.5).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 33 44 2.56 (54.8) 2.85 (7.5).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 34 44 2.56 (54.8) 2.469 (62.7).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 35 48 2.56 (54.8) 2.85 (7.5).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 48 2.56 (54.8) 2.85 (7.5).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 37 48 2.56 (54.8) 2.469 (62.7).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 38 6.88 (30.2) 2.575 (65.4).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 39 6.88 (30.2) 2. (56.3).375 (34.9) 2.3 (53.7).875 (.2).84 (30.) 40 6.906 (23.0) 2.235 (56.8).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 4 8.093 (27.8) 2.425 (6.6).027 (26.).957 (.3).25 (3.2). (7.9) 4 42 8.093 (27.8) 2.425 (6.6).027 (26.).45 (29.).437 (.) 6 43.093 (27.8) 2.425 (6.6).027 (26.).45 (29.).437 (.) 6 44.88 (30.2) 2.575 (65.4).027 (26.).957 (.3).25 (3.2). (7.9) 4 45.88 (30.2) 2.575 (65.4).027 (26.).45 (29.).437 (.) 6 46.88 (30.2) 2.575 (65.4).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 47.406 (35.7) 2.85 (7.5).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 48 40 2.56 (54.8) 2.85 (7.5).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 49* 0.500 (38.) 2.035 (5.7).027 (26.).45 (29.).437 (.) 6 50* 4.842 (46.8) 2.425 (6.6).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 5* 6.938 (49.2) 2.575 (65.4).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 52 8.093 (27.8) 2.425 (6.6).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 53 6.88 (30.2) 2.575 (65.4).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 54.093 (27.8) 2.425 (6.6).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 55* 2.06 (52.3) 2.625 (66.7).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 56.88 (30.2) 2.575 (65.4).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 57.88 (30.2) 2.575 (65.4).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 58* 2.06 (52.3) 2.625 (66.7).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 59.88 (30.2) 2.575 (65.4).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 60. (33.3) 2.625 (66.7).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 6. (33.3) 2.625 (66.7).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 62.375 (34.9) 2.725 (69.2).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 63.406 (35.7) 2.85 (7.5).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 64.406 (35.7) 2.85 (7.5).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 65 40 2.56 (54.8) 2.85 (7.5).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 66 40 2.56 (54.8) 2.85 (7.5).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 67 44 2.56 (54.8) 2.85 (7.5).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 68 44 2.56 (54.8) 2.85 (7.5).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 69 48 2.56 (54.8) 2.85 (7.5).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 70 48 2.56 (54.8) 2.85 (7.5).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 7* 2.684 (42.8) 2.2 (56.8).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 72* 8.938 (49.2) 2.575 (65.4).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 73* 2.06 (52.3) 2.625 (66.7).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 74 4.82 (.6) 2.25 (54.0).027 (26.).957 (.3).25 (3.2). (7.9) 04 75 6.906 (23.0) 2.235 (56.8).027 (26.).957 (.3).25 (3.2). (7.9) 04 05 lenair, Inc. * Denotes Style 2 ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-7
MI/RI Non-nv. ackshells S85049/ and MS388 MI/RI Non-nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 (Table I, Page 38-0) (Table I, Page 38-0) H able Range STYL 2 L 4. able range is defined as the accommo-dations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. TL II Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 03 03 08 0 0 2 2 2 4 4 6 6 8 8 H.698 (7.7).448 (.8).603 (5.3).698 (7.7).698 (7.7).703 (7.9).703 (7.9).703 (7.9).803 (.4).803 (.4).988 (25.).988 (25.).078 (27.4).078 (27.4).078 (27.4).079 (27.4).8 (3.2).8 (3.2).8 (3.2).8 (3.2).3 (33.7) J.862 (47.3).382 (35.).262 (.).982 (50.3).382 (35.) 2.002 (50.9) 2.002 (50.9).397 (35.5) 2.072 (52.6).77 (43.6) 2.62 (54.9).807 (45.9) 2.3 (59.2).982 (50.3) 2.3 (59.2).982 (50.3) 2.442 (62.0) 2.087 (53.0) 2.442 (62.0) 2.087 (53.0) 2.62 (66.3) K Ref..027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).027 (26.).56 (29.4).027 (26.).56 (29.4).059 (26.9).375 (34.9).059 (26.9).375 (34.9).56 (33.7) M85049/-2 N Dash No. inish and Material = lack admium, Stainless Steel N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour admium Olive Drab Over lectroless Nickel, luminum 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-8 J K L.957 (.3).45 (29.).957 (.3).957 (.3).45 (29.).957 (.3).45 (29.).3 (33.8).45 (29.).3 (33.8).45 (29.).55 (39.4).3 (33.8).770 (45.0).3 (33.8).770 (45.0).55 (39.4) 2.3 (53.7).55 (39.4) 2.3 (53.7).770 (45.0) Table I ontinued on Page 38-9 Superceded Part Number MS388 2 N Dash No. inish (Material is luminum) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. able Range Min.25 (3.2).437 (.).25 (3.2).25 (3.2). (7.9).375 (9.5).25 (3.2). (7.9).437 (.).350 (8.9).500 (2.7).437 (.).350 (8.9).575 (4.6).437 (.).500 (2.7).700 (7.8).350 (8.9).625 (5.9).625 (5.9).779 (9.8).350 (8.9).625 (5.9).625 (5.9).904 (23.0).500 (2.7).750 (9.).875 (.2).029 (26.).500 (2.7).750 (9.).875 (.2).44 (29.).625 (5.9).937 (23.8) M85049/42 Ref 04 04 04 04 06 04 06 0 06 0 06 2 0 6 0 6 2 2 6
S85049/ and MS388 MI/RI Non-nvironmental ackshells MI/RI Non-nv. ackshells TL II (ontinued rom Page 38-8) Dash H J K L able Range M85049/42 No. Ref. Min Ref.3 (33.7) 2.257 (57.3).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 23.678 (42.6) 2.862 (72.7).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6.678 (42.6) 2.862 (72.7).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 25.678 (42.6) 2.507 (63.7).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 26.878 (47.7) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 27.878 (47.7) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9).878 (47.7) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).840 (46.7) 29 40 2.6 (66.8) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 30 40 2.6 (66.8) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 3 40 2.6 (66.8) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 44 2.6 (66.8) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 33 44 2.6 (66.8) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 34 44 2.6 (66.8) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 35 48 2.6 (66.8) 2.8 (7.9).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 48 2.6 (66.8) 2.8 (7.9).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 37 48 2.6 (66.8) 2.477 (62.9).830 (46.5) 3.0 (76.7).437 (.5).875 (47.6) 38 6.8 (3.2) 2.442 (62.0).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 39 6.8 (3.2) 2.087 (53.0).375 (34.9) 2.3 (53.7).875 (.2).84 (30.) 40 6.988 (25.) 2.62 (54.9).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 4 8.078 (27.4) 2.3 (59.2).027 (26.).957 (.3).25 (3.2). (7.9) 04 42 8.078 (27.4) 2.3 (59.2).027 (26.).45 (29.).437 (.) 06 43.078 (27.4) 2.3 (59.2).027 (26.).45 (29.).437 (.) 06 44.8 (3.2) 2.442 (62.0).027 (26.).957 (.3).25 (3.2). (7.9) 04 45.8 (3.2) 2.442 (62.0).027 (26.).45 (29.).437 (.) 06 46.8 (3.2) 2.442 (62.0).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 47.878 (47.7) 2.8 (7.9).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 48 40.878 (47.7) 2.8 (7.9).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 49* 0.453 (.9) 2.002 (50.9).027 (26.).45 (29.).437 (.) 06 50* 4.8 (46.4) 2.334 (59.3).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 5* 6.978 (50.2) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 52 8.078 (27.4) 2.3 (59.2).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 53 6.8 (3.2) 2.087 (53.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 54.078 (27.4) 2.3 (59.2).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 55* 2.078 (52.8) 2.62 (66.3).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 56.8 (3.2) 2.442 (62.0).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 57.8 (3.2) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 58* 2.078 (52.8) 2.62 (66.3).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 59.8 (3.2) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 60.3 (33.7) 2.62 (66.3).059 (26.9).55 (39.4).500 (2.7).750 (9.) 2 6.3 (33.7) 2.62 (66.3).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 62.678 (42.6) 2.862 (72.7).500 (38.) 2.3 (60.0).000 (25.4).375 (34.9) 63.878 (47.7) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 64.878 (47.7) 2.8 (7.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 65 40 2.6 (66.8) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 66 40 2.6 (66.8) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 67 44 2.6 (66.8) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 68 44 2.6 (66.8) 2.8 (7.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 69 48 2.6 (66.8) 2.8 (7.9).375 (34.9) 2.3 (53.7).875 (.2).250 (3.8) 70 48 2.6 (66.8) 2.8 (7.9).78 (45.2) 2.770 (70.4).250 (3.8).625 (4.3) 7* 2.748 (44.4) 2.62 (54.9).027 (26.).3 (33.8).350 (8.9).625 (5.9) 0 72* 8.988 (50.5) 2.442 (62.0).56 (29.4).770 (45.0).625 (5.9).937 (23.8) 6 73* 2.088 (53.0) 2.62 (66.3).375 (34.9) 2.6 (53.7).875 (.2).250 (3.8) 74 4.803 (.4) 2.072 (52.6).027 (26.).957 (.3).25 (3.2). (7.9) 04 75 6.988 (25.) 2.62 (54.9).027 (26.).957 (.3).25 (3.2). (7.9) 04 05 lenair, Inc. * Denotes Style 2 ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-9
MI/RI Non-nv. ackshells S85049/25 and MS3437 MI/RI Non-nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 M85049/25-2 N inish and Material = lack admium, Stainless Steel Dash No. (Table II) N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour admium Olive Drab Over lectroless Nickel, luminum Dash No. (Table II) MS3437 2 N Superceded Part Number inish = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel K able Range L 03 08 0 2 4 6 8 40 44 48 6 STYL 2 TL I lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN Dia.77 (9.6).65 (6.5).77 (9.6).40 (0.2).02 (25.9).2 (30.7).23 (3.2). (34.5).48 (37.6).73 (43.9).97 (50.0) 2. (56.4) 2.47 (62.7) 2.72 (69.) 2.97 (75.4) 3. (8.8).67 (42.4) STYL. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-0
S85049/25 and MS3437 MI/RI Non-nvironmental ackshells MI/RI Non-nv. ackshells Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 49 50 5 52 03 03 03 03 08 08 08 08 0 0 0 0 2 2 2 2 4 4 4 4 6 6 6 6 8 8 8 8 8 8 Style 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.062 (52.4) 3.063 (77.8) 2.82 (7.4) 3.82 (96.8) 2.062 (52.4) 3.062 (77.8) 2.82 (7.4) 3.82 (96.8) 2.062 (52.4) 3.062 (77.8) 2.82 (7.4) 3.82 (96.8) 2.062 (52.4) 3.062 (77.8) 2.82 (7.4) 3.82 (96.8) 2.062 (52.4) 3.062 (77.8) 2.82 (7.4) 3.82 (96.8) 2.062 (52.4) 3.062 (77.8) 2.82 (7.4) 3.82 (96.8) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 2.82 (7.4) 3.82 (96.8) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.82 (96.8) 4.82 (.2) 3.82 (96.8) 4.82 (.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.82 (96.8) 4.82 (.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) K Ref..027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).059 (26.9).059 (26.9).059 (26.9).56 (29.4).56 (29.4).027 (26.).027 (26.).059 (26.9).059 (26.9).56 (29.4).56 (29.4).027 (26.).027 (26.).059 (26.9).059 (26.9).56 (29.4).56 (29.4).375 (34.9).375 (34.9).027 (26.).027 (26.).059 (26.9).059 (26.9).56 (29.4).56 (29.4).375 (34.9).375 (34.9).059 (26.9).059 (26.9).56 (29.4).56 (29.4).56 (29.4).56 (29.4) TL II L.957 (.3).957 (.3).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).45 (29.).45 (29.).3 (33.8).3 (33.8).3 (33.8).3 (33.8).55 (39.4).55 (39.4).55 (39.4).55 (39.4).770 (45.0).770 (45.0).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7).55 (39.4).55 (39.4).770 (45.0).770 (45.0).770 (45.0).770 (45.0) Table I ontinued on Page 38-2 able Range Min.25 (3.2).25 (3.2).437 (.).437 (.).25 (3.2).25 (3.2).437 (.).437 (.).25 (3.2). (7.9).25 (3.2). (7.9).437 (.).437 (.).437 (.).437 (.).350 (8.9).625 (5.9).350 (8.9).625 (5.9).350 (8.9).575 (4.6).350 (8.9).575 (4.6).500 (2.7).750 (9.).500 (2.7).750 (9.).500 (2.7).700 (7.8).500 (2.7).700 (7.8).625 (5.9).937 (23.8).625 (5.9).937 (23.8).350 (8.9).625 (5.9).350 (8.9).625 (5.9).500 (2.7).750 (9.).500 (2.7).750 (9.).625 (5.9).937 (23.8).625 (5.9).937 (23.8).350 (8.9).625 (5.9).350 (8.9).625 (5.9).500 (2.7).750 (9.).500 (2.7).750 (9.).625 (5.9).937 (23.8).625 (5.9).937 (23.8).875 (.2).250 (3.8).875 (.2).250 (3.8).350 (8.9).625 (5.9).350 (8.9).625 (5.9).500 (2.7).750 (9.).500 (2.7).750 (9.).625 (5.9).937 (23.8).625 (5.9).937 (23.8).875 (.2).250 (3.8).875 (.2).250 (3.8).500 (2.7).750 (9.).500 (2.7).750 (9.).625 (5.9).82 (.6).625 (5.9).82 (.6).625 (5.9).937 (23.8).625 (5.9).937 (23.8) M85049/42 Ref 4 4 6 6 4 4 6 6 4 4 6 6 6 6 0 0 0 0 2 2 2 2 6 6 0 0 2 2 6 6 0 0 2 2 6 6 0 0 2 2 6 6 2 2 6 6 6 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-
MI/RI Non-nv. ackshells S85049/25 and MS3437 MI/RI Non-nvironmental ackshells Dash No. 53 54 55 56 57 58 59 60 6 62 63 64 65 66 67 68 69 70 7 72 73 74 75 76 77 78 79 80 8 82 83 84 85 86 87 88 89 90 9 92 93 94 95 96 97 98 99 00 0 02 03 04 40 40 40 40 40 40 40 40 44 44 44 44 44 44 44 44 48 48 48 48 48 48 48 48 6 6 Style 2 2 2 2 3.82 (96.8) 4.82 (.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.942 (25.5) 5.942 (50.9) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 3.062 (77.8) 4.062 (03.2) TL II (ontinued rom Page 38-) K Ref..375 (34.9).375 (34.9).059 (26.9).059 (26.9).56 (29.4).56 (29.4).375 (34.9).375 (34.9).500 (38.).500 (38.).56 (29.4).56 (29.4).375 (34.9).375 (34.9).500 (38.).500 (38.).78 (45.2).78 (45.2).375 (34.9).375 (34.9).500 (38.).500 (38.).78 (45.2).78 (45.2).830 (46.5).830 (46.5).375 (34.9).375 (34.9).500 (38.).500 (38.).78 (45.2).78 (45.2).830 (46.5).830 (46.5).375 (34.9).375 (34.9).500 (38.).500 (38.).78 (45.2).78 (45.2).830 (46.5).830 (46.5).375 (34.9).375 (34.9).500 (38.).500 (38.).78 (45.2).78 (45.2).830 (46.5).830 (46.5).059 (26.9).059 (26.9) L 2.3 (53.7) 2.3 (53.7).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7).55 (39.4).55 (39.4) Table I ontinued on Page 38-3 Min.875 (.2).875 (.2).500 (2.7).500 (2.7).625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).500 (2.7).500 (2.7) able Range.250 (3.8).250 (3.8).750 (9.).750 (9.).937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).750 (9.).750 (9.) M85049/ 42 Ref 2 2 6 6 6 6 2 2 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-2
S85049/25 and MS3437 MI/RI Non-nvironmental ackshells MI/RI Non-nv. ackshells Dash No. 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 49 50 5 52 53 54 55 56 57 6 6 6 6 6 6 2 6 6 2 2 4 4 6 6 8 8 8 8 40 40 0 0 2 2 4 4 6 6 44 44 40 40 Style 2 2 2 2 3.062 (77.8) 4.062 (03.2) 3.82 (96.8) 4.82 (.2) 3.82 (96.8) 4.82 (.2) 2.062 (52.4) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 3.062 (77.8) 4.062 (03.2) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) 2.062 (52.4) 3.062 (77.8) 2.062 (52.4) 3.062 (77.8) 4.062 (03.2) 5.062 (.6) 4.062 (03.2) 5.062 (.6) TL II (ontinued Rom Page 38-2) K Ref..56 (29.4).56 (29.4).375 (34.9).375 (34.9).500 (38.).500 (38.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).027 (26.).059 (26.9).059 (26.9).059 (26.9).059 (26.9).027 (26.).027 (26.).027 (26.).027 (26.).56 (29.4).56 (29.4).375 (34.9).375 (34.9).375 (34.9).375 (34.9).830 (46.5).830 (46.5).56 (29.4).56 (29.4).027 (26.).027 (26.).027 (26.).027 (26.).56 (29.4).56 (29.4).56 (29.4).56 (29.4) L.770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0).3 (33.8).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).3 (33.8).3 (33.8).957 (.3).957 (.3).45 (29.).45 (29.).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).3 (33.8).3 (33.8).55 (39.4).55 (39.4).55 (39.4).55 (39.4).45 (29.).45 (29.).3 (33.8).3 (33.8).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (53.7) 2.3 (53.7) 3.0 (76.7) 3.0 (76.7).770 (45.0).770 (45.0).957 (.3).957 (.3).957 (.3).957 (.3).770 (45.0).770 (45.0).770 (45.0).770 (45.0) Min.625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).350 (8.9).25 (3.2).25 (3.2).350 (8.9).350 (8.9).25 (3.2).25 (3.2).25 (3.2).25 (3.2).350 (8.9).350 (8.9).500 (2.7).500 (2.7).500 (2.7).500 (2.7).350 (8.9).350 (8.9).625 (5.9).625 (5.9).875 (.2).875 (.2).875 (.2).875 (.2).437 (.5).437 (.5).625 (5.9).625 (5.9).25 (3.2).25 (3.2).25 (3.2).25 (3.2).625 (5.9).625 (5.9).625 (5.9).625 (5.9) able Range.937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).500 (2.7).437 (.).437 (.). (7.9). (7.9).437 (.).437 (.).625 (5.9).625 (5.9). (7.9). (7.9).437 (.).437 (.).437 (.).437 (.). (7.9). (7.9).437 (.).437 (.).625 (5.9).625 (5.9).750 (9.).750 (9.).750 (9.).750 (9.).375 (9.5).375 (9.5).500 (2.7).500 (2.7).904 (23.0).904 (23.0).029 (26.).029 (26.).44 (29.).44 (29.).840 (46.7).840 (46.7).937 (23.8).937 (23.8). (7.9). (7.9). (7.9). (7.9).937 (23.8).937 (23.8).937 (23.8).937 (23.8) M85049/42 Ref 6 6 0 06 06 04 04 06 06 0 0 04 04 06 06 06 06 04 04 0 06 0 0 2 2 2 2 06 06 0 0 6 6 6 6 04 04 04 04 6 6 6 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-3
MI/RI Non-nv. ackshells S85049/ MI/RI Non-nvironmental ackshell lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/ 0 N 03 inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Length ode (Omit for Standard) lamp Length. (33.3) able Range 08 0 2 4 6 8 Series I Ref. 09 3 5 7 9 2 23 25 TL I lamp (Table IV) Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.65 (6.5).77 (9.6).89 (.6).02 (25.9).5 (29.2).23 (3.2). (34.5).48 (37.6).73 (43.9) lamp 0 02 03 04 05 06 07 08 09 0 Min.062 (.6).25 (3.2). (7.9).437 (.).562 (4.3).687 (7.4).82 (.6).937 (23.8).062 (27.0) TL II able Range.25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).78 (9.8).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).625 (4.3).750 (44.5).875 (47.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Length ode Std. TL III vailable s 08-08 - 4 - - Length.50 (38.) 2.50 (63.5) 3.50 (88.9) 4.50 (4.3) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-4
S85049/37 MI/RI Non-nvironmental ackshells MI/RI Non-nv. ackshells lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 8 0 2 4 6 8 8 0 2 4 6 8 lamp 0 02 03 04 05 06 07 08 09 0 Series I Ref. 09 3 5 7 9 2 23 25 Series I Ref. 09 3 5 7 9 2 23 25 TL I lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Min.062 (.6).25 (3.2). (7.9).437 (.).562 (4.3).687 (7.4).82 (.6).937 (23.8).062 (27.0) TL II.72 (8.3).72 (8.3).80 (.3).85 (2.6).9 (23.).00 (25.4).05 (26.7).0 (27.9). (30.5) TL III able Range.25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8) M85049/37 0 W 03 L inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Dia.65 (6.5).77 (9.6).89 (.6).02 (25.9).5 (29.2).23 (3.2). (34.5).48 (37.6).73 (43.9) 2.50 (63.5) 2.50 (63.5) 2.56 (65.0) 2.69 (68.3) 2.8 (7.4) 3.03 (77.0) 3.9 (8.0) 3.3 (84.) 3.3 (84.).78 (9.8).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).625 (4.3).750 (44.5).875 (47.6) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 38-5 Dia lamp Min 0 02 0 03 02 04 02 05 02 06 03 06 03 07 03 08 04 09 Hole(s) per Part Number Development D = 3 Drain Holes L = ncapsulating Hole lamp able Range. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria.
Ten Reasons to Keep lenair at the Top of Your List of ackshell Suppliers. We offer the lowest total cost of ownership in the interconnect industry: rom our costsaving "no minimum order" policy to our free product samples and application engineering, lenair provides the best value in connector accessories available today. 2. Our full spectrum product lines make for one-stop-shopping: We have the most complete selection of rectangular backshells and accessories in the world, including every Mil-Spec slash number and more composite designs than the rest of the industry combined. 3. We have the largest capacity, broadest capability factory in the business and the knowledge and expertise to handle any production requirement no matter how large or complex. 4. We've provided complete convenience in ordering since 956 (that's your convenience not ours): choose factory direct, your local lenair office or your favorite distributor. 5. We care as much about quality as you do: We're SNISO900 registered in urope and MIL-I-458 and oeing QS D-9000 ertified in North merica. 6. We have over 30,000 accessory part numbers ready for immediate shipment including every Mil--85049 accessory and thousands of lenair's most popular rectangular and circular backshell part numbers. 7. Our turnaround on quotes and custom orders is the fastest in the industry: We offer hour turnaround on RQ's and just 2 to 3 weeks delivery on custom orders, including Micro-Ds and other rectangular interconnects. 8. We have the largest and most experienced support staff in the business, including sales and engineering in every major aerospace market, on-site application engineering and dedicated product managers for every interconnect discipline. 9. We understand interconnect systems from the ground up: We're the only connector, backshell and accessory supplier to operate a full service harness facility. We even make our own line of assembly tools. 0. We're committed: ackshells and connector accessories are our life. We've served this market since 956 and we're committed to meeting the evolving needs of our customers. lenair: World of Interconnect Solutions
MI/RI nvironmental ackshells MI/RI nvironmental ackshells The backshells described in this section have MI/RI shield/screen terminations with cable sealing or environmental resisting features. Straight and angled designs are available. lenair s lenair Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS388 M85049/8 39000 90 ackshell 39-0 MS389 M85049/6 39000 45 ackshell 39-8 MS3437 M85049/0 390S00 Straight ackshell 39-2 M840/6 ** Straight ackshell 39-2 M840/8 ** 90 Split ackshell 39-3 M840/9 ** 45 Split ackshell 39-4 M38999/5 M85049/7 390S02 Straight ackshell 39-6* M85/4 (,) 390JS02 Straight ackshell J 39-6 S85049/6 39000 45 ackshell 39-8 S85049/8 39000 90 ackshell 39-0 S85049/0 390S00 Straight ackshell 39-2 S85049/7 390S02 Straight ackshell 39-6 S85049/8 390HS0 Straight ackshell H 39-7 S85049/76 390L0 90 ackshell 39-8 S85049/77 390K0 45 ackshell 39-9 S85049/78 390HK0 45 ackshell H 39- S85049/79 390HL0 90 ackshell H 39-2 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-
MI/RI nvironmental ackshells lenair onnector Designator 3 5 7 9 23 25 29 33 Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 MIL--840 TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS Ref. 3 3 5 5 5 5 7 7 7 9 9 23 23 23 25 25 25 25 29 29 33 33 3 3 5 ±.2 (3.0) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.2 (04.6) 4.62 (7.3) 4.62 (7.3) 4.62 (7.3) 4.62 (7.3) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 5.2 (30.0) 3.62 (9.9) 3.62 (9.9) 3.62 (9.9) 4.2 (04.6) 4.2 (04.6) Dash No. (Table II) Dia.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2) Ref. Dim. (.5). (.5). (.5). (.5). (.5). (.5). (33.3). (.5). (33.3).406 (35.7). (.5).406 (35.7). (33.3).406 (35.7).593 (40.5).406 (35.7).593 (40.5).593 (40.5).625 (4.3).593 (40.5).625 (4.3).625 (4.3).900 (48.3). (.5). (.5). (.5). (.5). (.5) M840/6 MI/RI nvironmental ackshell M840/6 6 W TL II Ref. Dim.938 (23.8).938 (23.8).25 (.6).938 (23.8).25 (.6). (33.3).593 (40.5). (33.3).593 (40.5).750 (44.5). (33.3).750 (44.5).593 (40.5).750 (44.5) 2.093 (53.2).750 (44.5) 2.093 (53.2) 2.093 (53.2) 2.343 (59.5) 2.093 (53.2) 2.343 (59.5) 2.343 (59.5) 2.750 (69.9).25 (.6). (33.3). (33.3). (33.3). (33.3) Style Designator - = MI/nvironmental Material and inish Designator D = orrosion Resistant Steel, admium Plate, lack W = lumimum, admium Olive Drab over lectroless Nickel 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-2 able Range Min.88 (4.8). (7.9).88 (4.8). (7.9). (7.).438 (.).88 (4.8). (7.9). (7.).438 (.).344 (8.7).562 (4.3).438 (.).750 (9.).375 (9.5).625 (5.9).438 (.).625 (5.9).750 (9.).938 (23.8).375 (9.5).625 (5.9).625 (5.9).438 (.).625 (5.9).938 (23.8).750 (9.).938 (23.8).82 (.6).88 (30.2).625 (5.9).938 (23.8).82 (.6).88 (30.2).875 (.2).250 (3.8).000 (25.4).380 (35.).82 (.6).88 (30.2).000 (25.4).380 (35.).000 (25.4).380 (35.).250 (3.8).625 (4.3). (7.).438 (.).344 (8.7).562 (4.3).344 (8.7).562 (4.3).375 (9.5).625 (5.9).375 (9.5).625 (5.9) able Range. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria.
M840/8 MI/RI nvironmental ackshell MI/RI nvironmental ackshells lenair onnector Designator M840/8 6 W Style Designator - = MI/nvironmental 3 5 7 9 23 25 29 33 MIL--840 TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS Dash No. (Table II) Dia.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2) Material and inish Designator D = orrosion Resistant Steel, admium Plate, lack W = lumimum, admium Olive Drab over lectroless Nickel Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 Ref. 3 3 5 5 5 5 7 7 7 9 9 23 23 23 25 25 25 25 29 29 33 33 3 3 5 nvelope 2.64 (66.4) 2.64 (66.4) 2.64 (66.4) 2.864 (72.7) 2.864 (72.7) 2.864 (72.7) 3.4 (79.) 3.4 (79.) 3.4 (79.) 3.4 (79.) 3.4 (79.) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.4 (85.4) 3.64 (9.8) 3.64 (9.8) 3.64 (9.8) 3.64 (9.8) 4.4 (04.5) 4.4 (04.5) 2.64 (66.4) 2.864 (72.7) 2.864 (72.7) 3.4 (79.) 3.4 (79.) 5.3 (35.4) 5.3 (35.4) 5.3 (35.4) 5.457 (38.6) 5.457 (38.6) 5.457 (38.6) 5.682 (44.3) 5.682 (44.3) 5.73 (45.) 5.807 (47.5) 5.682 (44.3) 5.8 (48.) 5.738 (45.7) 5.8 (48.) 6.09 (52.9) 5.8 (48.) 6.09 (52.9) 6.44 (56.) 6.76 (56.9) 6.44 (56.) 6.76 (56.9) 6.426 (63.2) 6.70 (70.2) 5.3 (35.4) 5.457 (38.6) 5.457 (38.6) 5.682 (44.3) 5.682 (44.3) TL II Ref. Dim.938 (23.8).938 (23.8).25 (.6).938 (23.8).25 (.6). (33.3).593 (40.5). (33.3).593 (40.5).750 (44.5). (33.3).750 (44.5).593 (40.5).750 (44.5) 2.093 (53.2).750 (44.5) 2.093 (53.2) 2.093 (53.2) 2.343 (59.5) 2.093 (53.2) 2.343 (59.5) 2.343 (59.5) 2.750 (69.9).25 (.6). (33.3). (33.3). (33.3). (33.3) Min.88 (4.8).88 (4.8). (7.).88 (4.8). (7.).344 (8.7).438 (.).375 (9.5).438 (.).625 (5.9).375 (9.5).625 (5.9).438 (.).625 (5.9).82 (.6).625 (5.9).82 (.6).875 (.2).000 (25.4).82 (.6).000 (25.4).000 (25.4).250 (3.8). (7.).344 (8.7).344 (8.7).375 (9.5).375 (9.5) able Range. (7.9). (7.9).438 (.). (7.9).438 (.).562 (4.3).750 (9.).625 (5.9).750 (9.).938 (23.8).625 (5.9).938 (23.8).750 (9.).938 (23.8).88 (30.2).938 (23.8).88 (30.2).250 (3.8).380 (35.).88 (30.2).380 (35.).380 (35.).625 (4.3).438 (.).562 (4.3).562 (4.3).625 (5.9).625 (5.9) able Range 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-3. or complete dimensions see applicable Military Specification. 2. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria.
MI/RI nvironmental ackshells M840/9 MI/RI nvironmental ackshell lenair onnector Designator M840/9 6 W Style Designator - = MI/nvironmental MIL--840 Dash No. (Table II) Material and inish Designator D = orrosion Resistant Steel, admium Plate, lack W = lumimum, admium Olive Drab over lectroless Nickel.75 (9.) 2.25 (57.2) ±.2 (3.0) able Range. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-4
M840/9 MI/RI nvironmental ackshell MI/RI nvironmental ackshells 3 5 7 9 23 25 29 33 TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS Dia.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2) Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 Ref. 3 3 5 5 5 5 7 7 7 9 9 23 23 23 25 25 25 25 29 29 33 33 3 3 5.03 (26.2).03 (26.2).03 (26.2).56 (29.4).56 (29.4).56 (29.4). (.5). (.5). (.5). (.5). (.5).406 (35.7).406 (35.7).406 (35.7).406 (35.7).406 (35.7).406 (35.7).53 (38.9).53 (38.9).53 (38.9).53 (38.9).78 (45.2).78 (45.2).03 (26.2).56 (29.4).56 (29.4). (.5). (.5) Ref. Dim. (.5). (.5). (.5). (.5). (.5). (.5). (33.3). (.5). (33.3).406 (35.7). (.5).406 (35.7). (33.3).406 (35.7).593 (40.5).406 (35.7).593 (40.5).593 (40.5).625 (4.3).593 (40.5).625 (4.3).625 (4.3).900 (48.3). (.5). (.5). (.5). (.5). (.5) TL II Ref. Dim.938 (23.8).938 (23.8).25 (.6).938 (23.8).25 (.6). (33.3).593 (40.5). (33.3).593 (40.5).750 (44.5). (33.3).750 (44.5).593 (40.5).750 (44.5) 2.093 (53.2).750 (44.5) 2.093 (53.2) 2.093 (53.2) 2.343 (59.5) 2.093 (53.2) 2.343 (59.5) 2.343 (59.5) 2.750 (69.9).25 (.6). (33.3). (33.3). (33.3). (33.3) able Range Min.88 (4.8).88 (4.8). (7.).88 (4.8). (7.).344 (8.7).438 (.).375 (9.5).438 (.).625 (5.9).375 (9.5).625 (5.9).438 (.).625 (5.9).82 (.6).625 (5.9).82 (.6).875 (.2).000 (25.4).82 (.6).000 (25.4).000 (25.4).250 (3.8). (7.).344 (8.7).344 (8.7).375 (9.5).375 (9.5). (7.9). (7.9).438 (.). (7.9).438 (.).562 (4.3).750 (9.).625 (5.9).750 (9.).938 (23.8).625 (5.9).938 (23.8).750 (9.).938 (23.8).88 (30.2).938 (23.8).88 (30.2).250 (3.8).380 (35.).88 (30.2).380 (35.).380 (35.).625 (4.3).438 (.).562 (4.3).562 (4.3).625 (5.9).625 (5.9) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-5
MI/RI nvironmental ackshells lenair onnector Designator J MIL--85 M85/4 unctions and RI nvironmental ackshells M85/4-050 Dash No. Inactive for New Design. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. or unctions and D see page 38-2. Typ. Length Ref. Length Ref. Dia Typ. able Range Typ. Dash No. 00 002 003 004 005 006 007 008 009 00 0 02 03 04 05 06 07 08 09 0 02 0 023 0 025 026 027 0 029 030 03 0 033 034 035 0 037 unction "" dapter ssembly 08 08 08 08 08 08 08 08 0 0 0 0 0 0 0 0 0 0 0 0 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 unction lass 2.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.625 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.875 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN TL I Dia..555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).555 (4.).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).680 (7.3).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).930 (23.6).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8) unction "" dapter ssembly Length Ref. 2. (56.4) 2. (56.4) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 3. (8.8) 3. (8.8) 2. (56.4) 2. (56.4) 2. (56.4) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 3. (8.8) 3. (8.8) 3. (8.8) 2. (56.4) 2. (56.4) 2. (56.4) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 3. (8.8) 3. (8.8) 3. (8.8) 2. (56.4) 2. (56.4) 2. (56.4) 2.72 (69.) 2.72 (69.) Table I ontinued on Page 39-7 able Range Min.062 (.6).25 (3.2).062 (.6).25 (3.2).062 (.6).25 (3.2).062 (.6).25 (3.2).25 (3.2).375 (9.5).25 (3.2).375 (9.5).25 (3.2).375 (9.5).25 (3.2).375 (9.5).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).25 (3.2).25 (3.2).25 (3.2).25 (3.2).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7).625 (5.9).375 (9.5).500 (2.7) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-6
M85/4 unctions and RI nvironmental ackshells MI/RI nvironmental ackshells Dash No. 038 039 040 04 042 043 044 045 046 047 048 049 050 05 052 053 054 055 056 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 unction TL I (ontinued rom Page 39-6) lass 2.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.000 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.25 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.250 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.375 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN.500 - UN Dia..056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).056 (26.8).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).80 (30.0).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).305 (33.).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).430 (.3).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5).555 (39.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. or unctions and D see page 38-2. Length Ref. 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 3. (8.8) 3. (8.8) 3. (8.8) 2. (56.4) 2. (56.4) 2. (56.4) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 2.72 (69.) 3. (8.8) 3. (8.8) 3. (8.8) 2.30 (58.4) 2.30 (58.4) 2.30 (58.4) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 3.30 (83.8) 3.30 (83.8) 3.30 (83.8) 2.30 (58.4) 2.30 (58.4) 2.30 (58.4) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 3.30 (83.8) 3.30 (83.8) 3.30 (83.8) 2.30 (58.4) 2.30 (58.4) 2.30 (58.4) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 2.80 (7.) 3.30 (83.8) 3.30 (83.8) 3.30 (83.8) able Range Min.500 (2.7).625 (5.9).375 (9.5).375 (9.5).500 (2.7).500 (2.7).625 (5.9).375 (9.5).375 (9.5).500 (2.7).500 (2.7).625 (5.9).375 (9.5).500 (2.7).500 (2.7).625 (5.9).625 (5.9).750 (9.).375 (9.5).500 (2.7).500 (2.7).625 (5.9).625 (5.9).750 (9.).375 (9.5).500 (2.7).500 (2.7).625 (5.9).625 (5.9).750 (9.).375 (9.5).500 (2.7).500 (2.7).625 (5.9).625 (5.9).750 (9.).500 (2.7).625 (5.9).625 (5.9).750 (9.).750 (9.).875 (.2).500 (2.7).625 (5.9).625 (5.9).750 (9.).750 (9.).875 (.2).500 (2.7).625 (5.9).625 (5.9).750 (9.).750 (9.).875 (.2).500 (2.7).625 (5.9).625 (5.9).750 (9.).750 (9.).875 (.2).625 (5.9).750 (9.).750 (9.).875 (.2).875 (.2).000 (25.4).625 (5.9).750 (9.).750 (9.).875 (.2).875 (.2).000 (25.4).625 (5.9).750 (9.).750 (9.).875 (.2).875 (.2).000 (25.4).625 (5.9).750 (9.).750 (9.).875 (.2).875 (.2).000 (25.4).750 (9.).875 (.2).875 (.2).000 (25.4).000 (25.4).25 (.6).750 (9.).875 (.2).875 (.2).000 (25.4).000 (25.4).25 (.6).750 (9.).875 (.2).875 (.2).000 (25.4).000 (25.4).25 (.6).750 (9.).875 (.2).875 (.2).000 (25.4).000 (25.4).25 (.6) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-7
MI/RI nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 Dash No. Dash No. S85049/6 and MS389 MI/RI nvironmental ackshells (Table I, Page 39-2) M85049/6-2 W MS389 2 inish = lack admium, Stainless Steel N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour ad. Olive Drab Over lectroless Nickel, luminum Superceded Part Number inish (Material is luminum Only) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel (Table I, Page 39-2) STYL 2. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. K able Range L Dash No. 2* 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 3 3 8 0 0 2 2 2 4 4 6 6 8 8.686 (7.4).500 (38.).625 (5.9).686 (7.4).686 (7.4).750 (9.).750 (9.).750 (9.).83 (.7).83 (.7).906 (23.0).906 (23.0).093 (27.8).093 (27.8).093 (27.8).093 (27.8).88 (30.2).88 (30.2).88 (30.2).88 (30.2).33 (33.4).852 (47.0).972 (50.).4 (3.6).92 (48.6).307 (33.2).972 (50.).972 (50.).972 (50.) 2.062 (52.4).77 (43.6) 2.72 (55.2).82 (46.0) 2.2 (60.0) 2.000 (50.8) 2.2 (60.0) 2.000 (50.8) 2.52 (63.8) 2.55 (54.7) 2.52 (63.8) 2.55 (54.7) 2.562 (65.) TL II K Ref..544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).844 (46.8).544 (39.2).844 (46.8).544 (39.2).96 (48.7).844 (46.8) 2.000 (50.8).844 (46.8) 2.000 (50.8).96 (48.7) 2.230 (56.6).96 (48.7) 2.230 (56.6) 2.000 (50.8) L.957 (.3).45 (29.).957 (.3).957 (.3).45 (29.).957 (.3).45 (29.).3 (33.8).45 (29.).3 (33.8).45 (29.).55 (39.4).3 (33.8).770 (45.0).3 (33.8).770 (45.0).55 (39.4) 2.3 (53.7).55 (39.4) 2.3 (53.7).770 (45.0) Table II ontinued on Page 39-9 able Range Min.25 (3.2).437 (.).25 (3.2).25 (3.2). (7.9).375 (9.5).25 (3.2). (7.9).437 (.).350 (8.9).500 (2.7).437 (.).350 (8.9).575 (4.6).437 (.).500 (2.7).700 (7.8).350 (8.9).625 (5.9).625 (5.9).779 (9.8).350 (8.9).625 (5.9).625 (5.9).904 (23.0).500 (2.7).750 (9.).875 (.2).029 (26.).500 (2.7).750 (9.).875 (.2).44 (29.).625 (5.9).937 (23.8) M85049/42 Ref 4 6 4 4 6 4 6 0 6 0 6 2 0 6 0 6 2 2 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-8
S85049/6 and MS389 MI/RI nvironmental ackshells MI/RI nvironmental ackshells TL II (ontinued rom Page 39-8) Dash No. K Ref. L Min able Range M85049/42 Ref. (33.3) 2. (56.3) 2.0 (5.4) 2.3 (60.0).000 (25.4).375 (34.9) 23.375 (34.9) 2.662 (67.6) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6.375 (34.9) 2.662 (67.6) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 25.375 (34.9) 2. (58.7) 2.550 (64.8) 2.770 (70.4).250 (3.8).625 (4.3) 26.406 (35.7) 2.752 (69.9) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 27.406 (35.7) 2.752 (69.9) 2.0 (5.4) 2.3 (60.0).000 (25.4).375 (34.9).406 (35.7) 2.406 (6.) 2.600 (66.0) 3.0 (76.7).437 (.5).840 (46.7) 29 40 2.56 (54.8) 2.752 (69.9) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 30 40 2.56 (54.8) 2.752 (69.9) 2.0 (5.4) 2.3 (60.0).000 (25.4).375 (34.9) 3 40 2.56 (54.8) 2.406 (6.) 2.600 (66.0) 3.0 (76.7).437 (.5).875 (47.6) 44 2.56 (54.8) 2.752 (69.9) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 33 44 2.56 (54.8) 2.752 (69.9) 2.0 (5.4) 2.3 (60.0).000 (25.4).375 (34.9) 34 44 2.56 (54.8) 2.406 (6.) 2.600 (66.0) 3.0 (76.7).437 (.5).875 (47.6) 35 48 2.56 (54.8) 2.752 (69.9) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 48 2.56 (54.8) 2.752 (69.9) 2.0 (5.4) 2.3 (60.0).000 (25.4).375 (34.9) 37 48 2.56 (54.8) 2.406 (6.) 2.600 (66.0) 3.0 (76.7).437 (.5).875 (47.6) 38 6.88 (30.2) 2.52 (63.8).96 (48.7).55 (39.4).500 (2.7).750 (9.) 2 39 6.88 (30.2) 2.55 (54.7) 2.230 (56.6) 2.3 (53.7).875 (.2).84 (30.) 40 6.906 (23.0) 2.72 (55.2).844 (46.8).3 (33.8).350 (8.9).625 (5.9) 0 4 8.093 (27.8) 2.2 (60.0).544 (39.2).957 (.3).25 (3.2). (7.9) 04 42 8.093 (27.8) 2.2 (60.0).544 (39.2).45 (29.).437 (.) 06 43.093 (27.8) 2.2 (60.0).544 (39.2).45 (29.).437 (.) 06 44.88 (30.2) 2.52 (63.8).544 (39.2).957 (.3).25 (3.2). (7.9) 04 45.88 (30.2) 2.52 (63.8).544 (39.2).45 (29.).437 (.) 06 46.88 (30.2) 2.52 (63.8).844 (46.8).3 (33.8).350 (8.9).625 (5.9) 0 47.406 (35.7) 2.752 (69.9).96 (48.7).55 (39.4).500 (2.7).750 (9.) 2 48 40 2.56 (54.8) 2.752 (69.9).96 (48.7).55 (39.4).500 (2.7).750 (9.) 2 49* 0.500 (38.).972 (50.).544 (39.2).45 (29.).437 (.) 06 50* 4.842 (46.8) 2.2 (60.0).96 (48.7).55 (39.4).500 (2.7).750 (9.) 2 5* 6.937 (49.2) 2.52 (63.8) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 52 8.093 (27.8) 2.2 (60.0).96 (48.7).55 (39.4).500 (2.7).750 (9.) 2 53 6.88 (30.2) 2.52 (63.8) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 54.093 (27.8) 2.2 (60.0).96 (48.7).55 (39.4).500 (2.7).750 (9.) 2 55* 2.06 (52.3) 2.562 (65.) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 56.88 (30.2) 2.52 (63.8).844 (46.8).3 (33.8).350 (8.9).625 (5.9) 0 57.88 (30.2) 2.52 (63.8) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 58* 2.06 (52.3) 2.562 (65.) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 59.88 (30.2) 2.52 (63.8) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 60.33 (33.4) 2.562 (65.).96 (48.7).55 (39.4).500 (2.7).750 (9.) 2 6.33 (33.4) 2.562 (65.) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 62.375 (34.9) 2.662 (67.6) 2.0 (5.4) 2.3 (60.0).000 (25.4).375 (34.9) 63.406 (35.7) 2.752 (69.9) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 64.406 (35.7) 2.752 (69.9) 2.550 (64.8) 2.770 (70.4).250 (3.8).625 (4.3) 65 40 2.56 (54.8) 2.752 (69.9) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 66 40 2.56 (54.8) 2.752 (69.9) 2.550 (64.8) 2.770 (70.4).250 (3.8).625 (4.3) 67 44 2.56 (54.8) 2.752 (69.9) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 68 44 2.56 (54.8) 2.752 (69.9) 2.550 (64.8) 2.770 (70.4).250 (3.8).625 (4.3) 69 48 2.56 (54.8) 2.752 (69.9) 2.230 (56.6) 2.3 (53.7).875 (.2).250 (3.8) 70 48 2.56 (54.8) 2.752 (69.9) 2.550 (64.8) 2.770 (70.4).250 (3.8).625 (4.3) 7* 2.654 (42.0) 2.72 (55.2).844 (46.8).3 (33.8).350 (8.9).625 (5.9) 0 72* 8.937 (49.2) 2.52 (63.8) 2.000 (50.8).770 (45.0).625 (5.9).937 (23.8) 6 73* 2.06 (52.3) 2.562 (65.) 2.230 (56.6) 2.6 (53.7).875 (.2).250 (3.8) 74 4.83 (.7) 2.062 (52.4).544 (39.2).957 (.3).25 (3.2). (7.9) 04 75 6.906 (23.0) 2.72 (55.2).544 (39.2).957 (.3).25 (3.2). (7.9) 04 05 lenair, Inc. * Denotes Style 2 ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-9
MI/RI nvironmental ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 STYL 2 (Table I, Page 39-2) (Table I, Page 39-2) S85049/8 and MS388 MI/RI nvironmental ackshell H able Range L J K M85049/8-2 W Dash No. inish = lack admium, Stainless Steel N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour ad. Olive Drab Over lectroless Nickel, luminum Superceded Part Number MS388 2 Dash No. inish (Material is luminum Only) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 3 3 8 0 0 2 2 2 4 4 6 6 8 8 H.76 (9.3).5 (38.4).666 (6.9).76 (9.3).76 (9.3).766 (9.5).766 (9.5).766 (9.5).866 (.0).866 (.0).05 (26.7).05 (26.7).4 (29.0).4 (29.0).4 (29.0).4 (29.0).29 (.8).29 (.8).29 (.8).29 (.8).39 (35.3) J.862 (47.3).382 (35.).262 (.).982 (50.3).382 (35.) 2.002 (50.9) 2.002 (50.9).397 (35.5) 2.072 (52.6).77 (43.6) 2.62 (54.9).807 (45.9) 2.3 (59.2).982 (50.3) 2.3 (59.2).982 (50.3) 2.442 (62.0) 2.087 (53.0) 2.442 (62.0) 2.087 (53.0) 2.62 (66.3) TL II K Ref..544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).844 (46.8).544 (39.2).844 (46.8).544 (39.2).96 (48.7).844 (46.8) 2.000 (50.8).844 (46.8) 2.000 (50.8).96 (48.7) 2.230 (56.6).96 (48.7) 2.230 (56.6) 2.000 (50.8) L.957 (.3).45 (29.).957 (.3).957 (.3).45 (29.).957 (.3).45 (29.).3 (33.8).45 (29.).3 (33.8).45 (29.).55 (39.4).3 (33.8).770 (45.0).3 (33.8).770 (45.0).55 (39.4) 2.3 (53.7).55 (39.4) 2.3 (53.7).770 (45.0) able Range Min.25 (3.2).437 (.).25 (3.2).25 (3.2). (7.9).375 (9.5).25 (3.2). (7.9).437 (.).350 (8.9).500 (2.7).437 (.).350 (8.9).575 (4.6).437 (.).500 (2.7).700 (7.8).350 (8.9).625 (5.9).625 (5.9).779 (9.8).350 (8.9).625 (5.9).625 (5.9).904 (23.0).500 (2.7).750 (9.).875 (.2).029 (26.).500 (2.7).750 (9.).875 (.2).44 (29.).625 (5.9).937 (23.8) M85049/42 Ref 4 6 4 4 6 4 6 0 6 0 6 2 0 6 0 6 2 2 6 Table II ontinued on Page 39-05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-0
S85049/8 and MS388 MI/RI nvironmental ackshell MI/RI nvironmental ackshells Dash No. 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 49* 50* 5* 52 53 54 55* 56 57 58* 59 60 6 62 63 64 65 66 67 68 69 70 7* 72* 73* 74 75 40 40 40 44 44 44 48 48 48 6 6 6 8 8 40 0 4 6 8 6 40 40 44 44 48 48 2 8 4 6 H.39 (35.3).74 (44.2).74 (44.2).74 (44.2).94 (49.3).94 (49.3).94 (49.3) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4).29 (.8).29 (.8).05 (26.7).4 (29.0).4 (29.0).4 (29.0).29 (.8).29 (.8).29 (.8).94 (49.3).94 (49.3).56 (38.5).89 (48.0) 2.04 (5.8).4 (29.0).29 (.8).4 (29.0) 2.4 (54.4).29 (.8).29 (.8) 2.4 (54.4).29 (.8).39 (35.3).39 (35.3).74 (44.2).94 (49.3).94 (49.3) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4) 2.69 (68.4).8 (46.0) 2.05 (52.) 2.5 (54.6).866 (.0).05 (26.7) TL II (ontinued rom Page 39-0) J 2.257 (57.3) 2.862 (72.7) 2.862 (72.7) 2.507 (63.7) 2.8 (7.9) 2.8 (7.9) 2.477 (62.9) 2.8 (7.9) 2.8 (7.9) 2.477 (62.9) 2.8 (7.9) 2.8 (7.9) 2.477 (62.9) 2.8 (7.9) 2.8 (7.9) 2.477 (62.9) 2.442 (62.0) 2.087 (53.0) 2.62 (54.9) 2.3 (59.2) 2.3 (59.2) 2.3 (59.2) 2.442 (62.0) 2.442 (62.0) 2.442 (62.0) 2.8 (7.9) 2.8 (7.9) 2.002 (50.9) 2.3 (59.2) 2.442 (62.0) 2.3 (59.2) 2.087 (53.0) 2.3 (59.2) 2.62 (66.3) 2.442 (62.0) 2.442 (62.0) 2.62 (66.3) 2.442 (62.0) 2.62 (66.3) 2.62 (66.3) 2.862 (72.7) 2.8 (7.9) 2.8 (7.9) 2.8 (7.9) 2.8 (7.9) 2.8 (7.9) 2.8 (7.9) 2.8 (7.9) 2.8 (7.9) 2.62 (54.9) 2.442 (62.0) 2.62 (66.3) 2.072 (52.6) 2.62 (54.9) K Ref. 2.0 (5.4) 2.000 (50.8) 2.230 (56.6) 2.550 (64.8) 2.000 (50.8) 2.0 (5.4) 2.600 (66.0) 2.000 (50.8) 2.0 (5.4) 2.600 (66.0) 2.000 (50.8) 2.0 (5.4) 2.600 (66.0) 2.000 (50.8) 2.0 (5.4) 2.600 (66.0).96 (48.7) 2.230 (56.6).844 (46.8).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).844 (46.8).96 (48.7).96 (48.7).544 (39.2).96 (48.7) 2.000 (50.8).96 (48.7) 2.000 (50.8).96 (48.7) 2.230 (56.6).844 (46.8) 2.000 (50.8) 2.230 (56.6) 2.000 (50.8).96 (48.7) 2.230 (56.6) 2.0 (5.4) 2.230 (56.6) 2.550 (64.8) 2.230 (56.6) 2.550 (64.8) 2.230 (56.6) 2.550 (64.8) 2.230 (56.6) 2.550 (64.8).844 (46.8) 2.000 (50.8) 2.230 (56.6).544 (39.2).544 (39.2) L 2.3 (60.0).770 (45.0) 2.3 (53.7) 2.770 (70.4).770 (45.0) 2.3 (60.0) 3.0 (76.7).770 (45.0) 2.3 (60.0) 3.0 (76.7).770 (45.0) 2.3 (60.0) 3.0 (76.7).770 (45.0) 2.3 (60.0) 3.0 (76.7).55 (39.4) 2.3 (53.7).3 (33.8).957 (.3).45 (29.).45 (29.).957 (.3).45 (29.).3 (33.8).55 (39.4).55 (39.4).45 (29.).55 (39.4).770 (45.0).55 (39.4).770 (45.0).55 (39.4) 2.3 (53.7).3 (33.8).770 (45.0) 2.3 (53.7).770 (45.0).55 (39.4) 2.3 (53.7) 2.3 (60.0) 2.3 (53.7) 2.770 (70.4) 2.3 (53.7) 2.770 (70.4) 2.3 (53.7) 2.770 (70.4) 2.3 (53.7) 2.770 (70.4).3 (33.8).770 (45.0) 2.6 (53.7).957 (.3).957 (.3) Min.000 (25.4).625 (5.9).875 (.2).250 (3.8).625 (5.9).000 (25.4).437 (.5).625 (5.9).000 (25.4).437 (.5).625 (5.9).000 (25.4).437 (.5).625 (5.9).000 (25.4).437 (.5).500 (2.7).875 (.2).350 (8.9).25 (3.2).25 (3.2).350 (8.9).500 (2.7).500 (2.7).500 (2.7).625 (5.9).500 (2.7).625 (5.9).500 (2.7).875 (.2).350 (8.9).625 (5.9).875 (.2).625 (5.9).500 (2.7).875 (.2).000 (25.4).875 (.2).250 (3.8).875 (.2).250 (3.8).875 (.2).250 (3.8).875 (.2).250 (3.8).350 (8.9).625 (5.9).875 (.2).25 (3.2).25 (3.2) able Range M85049/42 Ref.375 (34.9).937 (23.8) 6.250 (3.8).625 (4.3).937 (23.8) 6.375 (34.9).840 (46.7).937 (23.8) 6.375 (34.9).875 (47.6).937 (23.8) 6.375 (34.9).875 (47.6).937 (23.8) 6.375 (34.9).875 (47.6).750 (9.) 2.84 (30.).625 (5.9) 0. (7.9) 4.437 (.) 6.437 (.) 6. (7.9) 4.437 (.) 6.625 (5.9) 0.750 (9.) 2.750 (9.) 2.437 (.) 6.750 (9.) 2.937 (23.8) 6.750 (9.) 2.937 (23.8) 6.750 (9.) 2.250 (3.8).625 (5.9) 0.937 (23.8) 6.250 (3.8).937 (23.8) 6.750 (9.) 2.250 (3.8).375 (34.9).250 (3.8).625 (4.3).250 (3.8).625 (4.3).250 (3.8).625 (4.3).250 (3.8).625 (4.3).625 (5.9) 0.937 (23.8) 6.250 (3.8). (7.9) 4. (7.9) 4 * Denotes Style 2. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-
MI/RI nvironmental ackshells S85049/0 and MS3437 MI/RI nvironmental ackshell lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 M85049/0-2 W inish = lack admium, Stainless Steel Dash No. (Table II) N = lectroless Nickel, luminum S = Passivated Stainless Steel W =,000 Hour ad. Olive Drab Over lectroless Nickel, luminum Dash No. (Table II) MS3437 2 Superceded Part Number inish (Material is luminum Only) = admium Olive Drab over Nickel = admium Olive Drab N = lectroless Nickel K Dia able Range L STYL 2 STYL 3 8 0 2 4 6 8 40 44 48 6 TL I lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN Dia.67 (7.0).62 (5.7).73 (8.5).86 (2.8).98 (.9). (.2). (3.0).34 (34.0).47 (37.3).59 (40.4).97 (50.0) 2. (56.4) 2.47 (62.7) 2.72 (69.) 2.97 (75.4) 3. (8.8).65 (4.9). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. When maximum cable entry is exceeded, Style 2 will be supplied. 4. able range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-2
S85049/0 and MS3437 MI/RI nvironmental ackshell MI/RI nvironmental ackshells Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 49 50 5 52 3 3 3 3 8 8 8 8 0 0 0 0 2 2 2 2 4 4 4 4 6 6 6 6 8 8 8 8 8 8 Style 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.875 (73.0) 3.875 (98.4) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.875 (98.4) 4.875 (23.8) 3.875 (98.4) 4.875 (23.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.875 (98.4) 4.875 (23.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) K Ref..544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).844 (46.8).844 (46.8).844 (46.8).844 (46.8).96 (48.7).96 (48.7).96 (48.7).96 (48.7) 2.000 (50.8) 2.000 (50.8).844 (46.8).844 (46.8).96 (48.7).96 (48.7) 2.000 (50.8) 2.000 (50.8).844 (46.8).844 (46.8).96 (48.7).96 (48.7) 2.000 (50.8) 2.000 (50.8) 2.230 (56.6) 2.230 (56.6).844 (46.8).844 (46.8).96 (48.7).96 (48.7) 2.000 (50.8) 2.000 (50.8) 2.230 (56.6) 2.230 (56.6).96 (48.7).96 (48.7) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) TL II L.957 (.3).957 (.3).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).45 (29.).45 (29.).3 (33.8).3 (33.8).3 (33.8).3 (33.8).55 (39.4).55 (39.4).55 (39.4).55 (39.4).770 (45.0).770 (45.0).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7).3 (33.8).3 (33.8).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7).55 (39.4).55 (39.4).770 (45.0).770 (45.0).770 (45.0).770 (45.0) Table II ontinued on Page 39-4 able Range Min.25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).350 (8.9).350 (8.9).350 (8.9).350 (8.9).500 (2.7).500 (2.7).500 (2.7).500 (2.7).625 (5.9).625 (5.9).350 (8.9).350 (8.9).500 (2.7).500 (2.7).625 (5.9).625 (5.9).350 (8.9).350 (8.9).500 (2.7).500 (2.7).625 (5.9).625 (5.9).875 (.2).875 (.2).350 (8.9).350 (8.9).500 (2.7).500 (2.7).625 (5.9).625 (5.9).875 (.2).875 (.2).500 (2.7).500 (2.7).625 (5.9).625 (5.9).625 (5.9).625 (5.9).437 (.).437 (.).437 (.).437 (.). (7.9). (7.9).437 (.).437 (.).437 (.).437 (.).625 (5.9).625 (5.9).575 (4.6).575 (4.6).750 (9.).750 (9.).700 (7.8).700 (7.8).937 (23.8).937 (23.8).625 (5.9).625 (5.9).750 (9.).750 (9.).937 (23.8).937 (23.8).625 (5.9).625 (5.9).750 (9.).750 (9.).937 (23.8).937 (23.8).250 (3.8).250 (3.8).625 (5.9).625 (5.9).750 (9.).750 (9.).937 (23.8).937 (23.8).250 (3.8).250 (3.8).750 (9.).750 (9.).82 (.6).82 (.6).937 (23.8).937 (23.8) M85049/42 Ref 4 4 6 6 4 4 6 6 4 4 6 6 6 6 0 0 0 0 2 2 2 2 6 6 0 0 2 2 6 6 0 0 2 2 6 6 0 0 2 2 6 6 2 2 6 6 6 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-3
MI/RI nvironmental ackshells Dash No. 53 54 55 56 57 58 59 60 6 62 63 64 65 66 67 68 69 70 7 72 73 74 75 76 77 78 79 80 8 82 83 84 85 86 87 88 89 90 9 92 93 94 95 96 97 98 99 00 0 02 03 04 40 40 40 40 40 40 40 40 44 44 44 44 44 44 44 44 48 48 48 48 48 48 48 48 6 6 Style 2 2 2 2 3.875 (98.4) 4.875 (23.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.26 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 5.000 (27.0) 6.000 (52.4) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 3.25 (79.4) 4.25 (04.8) K Ref. 2.230 (56.6) 2.230 (56.6).96 (48.7).96 (48.7) 2.000 (50.8) 2.000 (50.8) 2.230 (56.6) 2.230 (56.6) 2.0 (5.4) 2.0 (5.4) 2.000 (50.8) 2.000 (50.8) 2.230 (56.6) 2.230 (56.6) 2.0 (5.4) 2.0 (5.4) 2.550 (64.8) 2.550 (64.8) 2.230 (56.6) 2.230 (56.6) 2.0 (5.4) 2.0 (5.4) 2.550 (64.8) 2.550 (64.8) 2.600 (66.0) 2.600 (66.0) 2.230 (56.6) 2.230 (56.6) 2.0 (5.4) 2.0 (5.4) 2.550 (64.8) 2.550 (64.8) 2.600 (66.0) 2.600 (66.0) 2.230 (56.6) 2.230 (56.6) 2.0 (5.4) 2.0 (5.4) 2.550 (64.8) 2.550 (64.8) 2.600 (66.0) 2.600 (66.0) 2.230 (56.6) 2.230 (56.6) 2.0 (5.4) 2.0 (5.4) 2.550 (64.8) 2.550 (64.8) 2.600 (66.0) 2.600 (66.0).96 (48.7).96 (48.7) S85049/0 and MS3437 MI/RI nvironmental ackshell TL II (ontinued rom Page 39-3) L 2.3 (53.7) 2.3 (53.7).55 (39.4).55 (39.4).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0) 2.770 (70.4) 2.770 (70.4) 3.0 (76.7) 3.0 (76.7).55 (39.4).55 (39.4) Table II ontinued on Page 39-5 Min.875 (.2).875 (.2).500 (2.7).500 (2.7).625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).875 (.2).875 (.2).000 (25.4).000 (25.4).250 (3.8).250 (3.8).437 (.5).437 (.5).500 (2.7).500 (2.7) able Range.250 (3.8).250 (3.8).750 (9.).750 (9.).937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).250 (3.8).250 (3.8).375 (34.9).375 (34.9).625 (4.3).625 (4.3).875 (47.6).875 (47.6).750 (9.).750 (9.) M85049/42 Ref 2 2 6 6 6 6 2 2 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-4
S85049/0 and MS3437 MI/RI nvironmental ackshell MI/RI nvironmental ackshells Dash No. 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 33 34 35 37 38 39 40 4 42 43 44 45 46 47 48 49 50 5 52 53 54 55 56 57 6 6 6 6 6 6 2 6 6 2 2 4 4 6 6 8 8 8 8 40 40 0 0 2 2 4 4 6 6 44 44 40 40 Style 2 2 2 2 3.25 (79.4) 4.25 (04.8) 3.875 (98.4) 4.875 (23.8) 3.875 (98.4) 4.875 (23.8) 2.25 (54.0) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 3.25 (79.4) 4.25 (04.8) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) 2.25 (54.0) 3.25 (79.4) 2.25 (54.0) 3.25 (79.4) 4.25 (04.8) 5.25 (30.2) 4.25 (04.8) 5.25 (30.2) TL II (ontinued rom Page 39-4) K Ref. 2.000 (50.8) 2.000 (50.8) 2.230 (56.6) 2.230 (56.6) 2.0 (5.4) 2.0 (5.4).844 (46.8).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).844 (46.8).844 (46.8).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).544 (39.2).844 (46.8).844 (46.8).96 (48.7).96 (48.7).96 (48.7).96 (48.7).544 (39.2).544 (39.2).844 (46.8).844 (46.8) 2.000 (50.8) 2.000 (50.8) 2.230 (56.6) 2.230 (56.6) 2.230 (56.6) 2.230 (56.6) 2.600 (66.0) 2.600 (66.0) 2.000 (50.8) 2.000 (50.8).544 (39.2).544 (39.2).544 (39.2).544 (39.2) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) L.770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (60.0) 2.3 (60.0).3 (33.8).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).3 (33.8).3 (33.8).957 (.3).957 (.3).45 (29.).45 (29.).45 (29.).45 (29.).957 (.3).957 (.3).45 (29.).45 (29.).3 (33.8).3 (33.8).55 (39.4).55 (39.4).55 (39.4).55 (39.4).45 (29.).45 (29.).3 (33.8).3 (33.8).770 (45.0).770 (45.0) 2.3 (53.7) 2.3 (53.7) 2.3 (53.7) 2.3 (53.7) 3.0 (76.7) 3.0 (76.7).770 (45.0).770 (45.0).957 (.3).957 (.3).957 (.3).957 (.3).770 (45.0).770 (45.0).770 (45.0).770 (45.0) Min.625 (5.9).625 (5.9).875 (.2).875 (.2).000 (25.4).000 (25.4).350 (8.9).25 (3.2).25 (3.2).350 (8.9).350 (8.9).25 (3.2).25 (3.2).25 (3.2).25 (3.2).350 (8.9).350 (8.9).500 (2.7).500 (2.7).500 (2.7).500 (2.7).350 (8.9).350 (8.9).625 (5.9).625 (5.9).875 (.2).875 (.2).875 (.2).875 (.2).437 (.5).437 (.5).625 (5.9).625 (5.9).25 (3.2).25 (3.2).25 (3.2).25 (3.2).625 (5.9).625 (5.9).625 (5.9).625 (5.9) able Range.937 (23.8).937 (23.8).250 (3.8).250 (3.8).375 (34.9).375 (34.9).500 (2.7).437 (.).437 (.). (7.9). (7.9).437 (.).437 (.).625 (5.9).625 (5.9). (7.9). (7.9).437 (.).437 (.).437 (.).437 (.). (7.9). (7.9).437 (.).437 (.).625 (5.9).625 (5.9).750 (9.).750 (9.).750 (9.).750 (9.).375 (9.5).375 (9.5).500 (2.7).500 (2.7).904 (23.0).904 (23.0).029 (26.).029 (26.).44 (29.).44 (29.).840 (46.7).840 (46.7).937 (23.8).937 (23.8). (7.9). (7.9). (7.9). (7.9).937 (23.8).937 (23.8).937 (23.8).937 (23.8) M85049/42 Ref 6 6 0 6 6 4 4 6 6 0 0 4 4 6 6 6 6 4 4 6 6 0 0 2 2 2 2 6 6 0 0 6 6 6 6 4 4 4 4 6 6 6 6 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-5
MI/RI nvironmental ackshells S85049/7 MI/RI nvironmental ackshell lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/7 0 N 03 inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Length ode (Omit for Standard) lamp 08 0 2 4 6 8 TL I lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.57 (4.5).70 (7.8).83 (2.).95 (.).08 (27.4). (30.5).33 (33.8).45 (.8).58 (40.) Dia Length O-Ring able Range 08 0 2 4 6 8 TL II Series Ref. 9 3 5 7 9 2 23 25 lamp Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 lamp 0 02 03 04 05 06 07 08 09 0 Min.062 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6) TL III able Range.25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).78 (9.8).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).625 (4.3).750 (44.5).875 (47.6).250 (3.8).250 (3.8).250 (3.8).250 (3.8). (33.3).375 (34.9).500 (38.).625 (4.3).625 (4.3).625 (4.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Length ode Std. TL IV vailable s 08-08 - 4 - - Length.50 (38.) 2.50 (63.5) 3.50 (88.9) 4.50 (4.3) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-6
S85049/8 MI/RI nvironmental ackshell MI/RI nvironmental ackshells lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/8 N 03 inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Length ode (Table IV, Omit for Standard) lamp (Table II & III) 9 3 5 7 9 2 23 25 TL I lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.75 (9.).85 (2.6).00 (25.4).5 (29.2).25 (3.8).40 (35.6).55 (39.4).65 (4.9).85 (47.0) Dia O-Ring Length able Range 9 3 5 7 9 2 23 25 TL II lamp (Table III) Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 lamp 0 02 03 04 05 06 07 08 09 0 Min.062 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6) TL III able Range.25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).78 (9.8).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).625 (4.3).750 (44.5).875 (47.6).250 (3.8).250 (3.8).250 (3.8).250 (3.8). (33.3).375 (34.9).500 (38.).625 (4.3).625 (4.3).625 (4.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Length ode Std. TL IV vailable s 9-25 9-25 5-25 2-25 Length.500 (38.) 2.500 (63.5) 3.500 (88.9) 4.500 (4.3) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-7
MI/RI nvironmental ackshells S85049/76 MI/RI nvironmental ackshell lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/76-0 W 0 lamp inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Dia 08 0 2 4 6 8 TL I lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.75 (9.).85 (2.6).00 (25.4).5 (29.2).25 (3.8).40 (35.6).55 (39.4).65 (4.9).85 (47.0) able Range 08 0 2 4 6 8 Series Ref. 09 3 5 7 9 2 23 25 lamp Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 TL II ±.56 (4.0).5 (3.5).627 (5.9).642 (6.3).79 (8.3).774 (9.7).854 (2.7).899 (.8).009 (25.6).0 (26.0) ±.88 (4.8) 3.267 (83.0) 3.387 (86.0) 3.407 (86.5) 3.477 (88.3) 3.567 (90.6) 3.737 (94.9) 3.737 (94.9) 3.847 (97.7) 3.847 (97.7) lamp 0 02 03 04 05 06 07 08 09 0 TL III able Range Min.062 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).80 (.3).00 (25.4).0 (27.9). (30.5).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5).90 (48.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-8
S85049/77 MI/RI nvironmental ackshell MI/RI nvironmental ackshells lenair onnector Designator MIL-DTL38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/77-0 W 0 lamp inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Dia 08 0 2 4 6 8 TL I lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.75 (9.).85 (2.6).00 (25.4).5 (29.2).25 (3.8).40 (35.6).55 (39.4).65 (4.9).85 (47.0) able Range 08 0 2 4 6 8 Series Ref. 09 3 5 7 9 2 23 25 TL II lamp Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 ±.062 (.6).398 (0.).458 (.6).58 (3.2).588 (4.9).678 (7.2).868 (.0).868 (.0).958 (.3).958 (.3) ±.062 (.6) 3.088 (78.4) 3.48 (80.0) 3.8 (8.5) 3.298 (83.8) 3.408 (86.6) 3.598 (9.4) 3.598 (9.4) 3.748 (95.2) 3.748 (95.2) lamp 0 02 03 04 05 06 07 08 09 0 TL III able Range Min.062 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).80 (.3).00 (25.4).0 (27.9). (30.5).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5).90 (48.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-9
MI/RI nvironmental ackshells S85049/78 MI/RI nvironmental ackshell lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/78- W 0 lamp inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel 9 3 5 7 9 2 23 25 TL I lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.75 (9.).85 (2.6).00 (25.4).5 (29.2).25 (3.8).40 (35.6).55 (39.4).65 (4.9).85 (47.0) Dia able Range H 09 3 5 7 9 2 23 25 lamp Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 TL II ±.062 (.6).398 (0.).458 (.6).58 (3.2).588 (4.9).678 (7.2).868 (.0).868 (.0).958 (.3).958 (.3) ±.062 (.6) 3.088 (78.4) 3.48 (80.0) 3.8 (8.5) 3.298 (83.8) 3.408 (86.6) 3.598 (9.4) 3.598 (9.4) 3.748 (95.2) 3.748 (95.2) lamp 0 02 03 04 05 06 07 08 09 0 TL III able Range Min.062 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8) H.80 (.3).00 (25.4).0 (27.9). (30.5).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5).90 (48.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-
S85049/79 MI/RI nvironmental ackshell MI/RI nvironmental ackshells lenair onnector Designator H M85049/79- W 0 lamp MIL-DTL-38999 Series III & IV, N45 inish N = lectroless Nickel W =,000 Hour admium Olive Drab Over lectroless Nickel 9 3 5 7 9 2 23 25 TL I lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.75 (9.).85 (2.6).00 (25.4).5 (29.2).25 (3.8).40 (35.6).55 (39.4).65 (4.9).85 (47.0) Dia able Range H 09 3 5 7 9 2 23 25 lamp Min 0 02 0 03 02 04 02 05 02 06 03 07 03 08 03 09 04 0 TL II ±.062 (.6).438 (.).533 (3.5).548 (3.9).638 (6.2).823 (.9).93 (23.2).93 (23.2).063 (27.0).063 (27.0) ±.062 (.6) 3.4 (79.8) 3.26 (82.8) 3. (83.3) 3.35 (85.) 3.44 (87.4) 3.6 (9.7) 3.6 (9.7) 3.72 (94.5) 3.72 (94.5) lamp 0 02 03 04 05 06 07 08 09 0 TL III able Range Min.062 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8) H.80 (.3).00 (25.4).0 (27.9). (30.5).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5).90 (48.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able range is defined as the accommodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 39-2
Tired of waiting an eternity for a simple connector or accessory? T Then lenair's "Same Day Delivery" program is the answer. ired of long lead times for connectors and accessories? Then consider over 35,000 different part numbers in stock, in quantity, and ready for immediate sameday shipment including virtually every Mil Spec accessory in the book. onsider as well lenair s no minimum order policy and our lightning fast turnaround on quotes for price and delivery. Visit our website at to search our Same-Day Inventory for all your time-sensitive interconnect requirements. ommercial and Mil Spec connector accessories onvoluted tubing and metal-core conduit lectrical and fiber optic cable assemblies omposite thermoplastic components Microminiature connectors and accessories ackshell assembly and termination tools 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany N o r d i c rance Italy S p a i n
T Rings and T Ring ackshells T Ring ackshells lenair's T Ring backshells offer a unique and reliable method of terminating individually shielded wires where the shields are to be grounded through the backshell and connector shell. No special tools are required for assembly and full maintainability is provided. lenair s lenair Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS2774 40-003 T Ring 40-2 M38999/4 M85049/30 400-00 T Ring dapter 40-3* S85049/30 400-00 T Ring dapter 40-3 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 40-
T Ring ackshells MS2774 T Ring MS2774-0.437 (.) Ref. ntry Dia Dash No. 2 3 4 5 6 7 8 9 0 Dia.545 (3.8).670 (7.0).795 (.2).9 (23.4).045 (26.5).70 (29.7).295 (.9).4 (.).687 (42.8).82 (46.0) TL I ntry Dia..375 (9.5).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6).250 (3.8).375 (34.9) No. of Slots 3 4 6 8 0 0 2 5 5 5 Weight in rams 2.268 2.7 3.75 4.082 4.5 4.990 5.443 6.350 0.433 4.55. or complete dimensions see applicable Military Specification. 2. inish: ody and Nut - old Iridite; Spring - old Plate. 3. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 40-2
S85049/30 T Ring ackshells T Ring ackshells lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/30-0 W inish N = lectroless Nickel W =,000 Hour admium Olive Drab Over lectroless Nickel.000 (25.4) ±.060 (.5) round Spring Dia able ntry 08 0 2 4 6 8 Series I Ref. 9 3 5 7 9 2 23 25 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN TL I Dia.75 (9.).85 (2.6).00 (25.4).0 (27.9).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5) able ntry.375 (9.5).500 (2.7).625 (5.9).750 (9.).844 (2.4).970 (.6).094 (27.8).29 (3.0) Dia.545 (3.8).670 (7.0).795 (.2).9 (23.4).045 (26.5).70 (29.7).295 (.9).4 (.).670 (42.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 40-3
ood Things ome In Small Packages T nd at lenair, They Ship the Same Day ired of long lead times for /O connectors and contacts? Then consider the lenair difference: We've placed our products in stock, in quantity, and ready for immediate shipment including both our MIL-T- 29504 qualified pin and socket termini as well as our new frontrelease 8-0 and 8-02 designs. onsider as well lenair s no minimum order policy and our lightning fast turnaround on quotes for price and delivery. t lenair, we re committed to keeping our products, programs and services current with your every need. 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany N o r d i c rance Italy Spain
rimp Ring and anding ackshells rimp Ring and anding ackshells rimp Ring ackshells rimp ring backshells provide an economical approach to terminating overall cable and harness shields where future repairability or maintainability are not required. These backshells use standard outer crimp rings for full 0 shield termination, and are available in versions for use with shrink boots or for molded cable terminations. anding ackshells anding backshells provide an economical approach to terminating overall cable and harness shields/screens. These backshells utilize standard bands for full 0 shield/screen termination with the lowest dc resistance available. lenair s Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS349 M85049/26-440S063 rimp Ring dapter 44-3 M38999/3 M85049/33-2 440S063 rimp Ring dapter 44-4* S85049/ 440S063 rimp Ring dapter H 44-2 S85049/26-440S063 rimp Ring dapter 44-3 S85049/26-2 ** rimp Ring 44-3 S85049/26-3 440S063 rimp Ring dapter 44-3 With rimp Ring S85049/33-2 440S063 rimp Ring dapter 44-4 S85049/82 440S069 Str. anding ackshell 44-5 S85049/83 440H069 45 anding ackshell 44-5 S85049/84 440J069 90 anding ackshell 44-5 S85049/85 440S069 Str. anding ackshell 44-6 S85049/86 440H069 45 anding ackshell 44-6 S85049/87 440J069 90 anding ackshell 44-6 S85049/88 440HS069 Str. anding ackshell H 44-8 S85049/89 440HH069 45 anding ackshell H 44-8 S85049/90 440HJ069 90 anding ackshell H 44-8 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-
rimp Ring and anding ackshells S85049/ rimp Ring ackshell lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/- W inish N = lectroless Nickel W =,000 Hour admium Olive Drab Over lectroless Nickel.00 (25.4) Dia M85049/26-2 rimp Ring (Ref.) 9 3 5 7 9 2 23 25 lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.75 (9.).85 (2.6).00 (25.4).0 (27.9).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5) TL I able ntry.265 (6.7).343 (8.7).437 (.).562 (4.3).687 (7.4).82 (.6).937 (23.8).046 (26.6).25 (.6) Dia.347 (8.8).498 (2.6).50 (3.0).630 (6.0).760 (9.3).890 (.6).00 (25.7).30 (.7).2 (30.5) M85049/26-2 rimp Ring Ref. 8 0 2 4 6 8. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-2
MS349 and S85049/26 rimp Ring ackshell rimp Ring and anding ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III 3 8 0 2 4 6 8 40 44 48 6 TL I lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN M85049/262 W M85049/26- = dapter Only M85049/26-2 = rimp Ring Only M85049/26-3 = dapter with rimp Ring Dia.67 (7.0).62 (5.7).73 (8.5).86 (2.8).98 (.9). (.2). (3.0).35 (34.3).47 (37.3).59 (40.4).97 (50.0) 2. (56.4) 2.47 (62.7) 2.72 (69.) 2.97 (75.4) 3. (8.8).65 (4.9) dapter Only Dash No. MS349-2.957 (.3) J inish (Not pplicable for M85049/26-2) N = lectroless Nickel W =,000 Hour admium Olive Drab Over lectroless Nickel Superceded Part Number inish = lectroless Nickel = 500 Hour admium Olive Drab Over lectroless Nickel M85049/26-2 rimp Ring M85049/26-2 rimp Ring H TL II M85049/26-3 (dapter with rimp Ring) 3 8 0 2 4 6 8 40 44 48 6 3 8 0 2 4 6 8 40 44 48 6 M85049/26- (dapter Only) MS349 (dapter Only) Dia Dia.337 (8.6).337 (8.6).5 (8.3).488 (2.4).4 (0.7).500 (2.7).540 (3.7).6 (5.7).670 (7.0).750 (9.).789 (.0).880 (.4).94 (23.2).000 (25.4).039 (26.4). (.4).2 (.2).92 (30.3).389 (35.3).545 (39.2).635 (4.5).795 (45.6).850 (47.0) 2.045 (5.9) 2.065 (52.5) 2.295 (58.3) 2.3 (58.9) 2.545 (64.6) 2.570 (65.3) 2.795 (7.0). (30.7).359 (34.5) 8 0 2 4 6 8 40 44 48 6 M85049/26-2 (rimp Ring Only) H Min Min.400 (0.2).585 (4.9).585 (4.9).705 (7.9).835 (2.2).005 (25.5).25 (.6).5 (3.6).7 (33.7).665 (42.3).95 (48.6) 2.65 (55.0) 2.45 (6.3) 2.665 (67.7) 2.95 (74.0).435 (.4).448 (.4).660 (6.8).660 (6.8).780 (9.8).90 (23.).080 (27.4).0 (30.5).3 (33.5).402 (35.6).740 (44.2).990 (50.5) 2.0 (56.9) 2.490 (63.2) 2.740 (69.6) 2.990 (75.9).50 (38.4) J.440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2).440 (.2). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-3
rimp Ring and anding ackshells S85049/33-2 rimp Ring ackshell lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/33-2-0 W inish N = lectroless Nickel W =,000 hour admium Olive Drab Over lectroless Nickel.906 (23.0) Dia M85049/26-2 rimp Ring (Ref.) 08 0 2 4 6 8 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.75 (9.).85 (2.6).00 (25.4).0 (27.9).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5) TL I Dia.5 (8.3).4 (0.7).540 (3.7).670 (7.0).789 (.0).94 (23.2).039 (26.4).2 (.2) Dia.347 (8.8).498 (2.6).50 (3.0).630 (6.0).760 (9.3).890 (.6).00 (25.7).30 (.7).2 (30.5) M85049/26-2 rimp Ring Ref. 8 0 2 4 6 8. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-4
S85049/82, S85049/83, and S85049/84 anding ackshells rimp Ring and anding ackshells lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 : M85049/82 = Straight M85049/83 = 45 M85049/84 = 90 M85049/82-6 P 02 Self Locking oupling ntry inish N = lectroless Nickel P = admium Olive Drab over lectroless Nickel with Polysulfide Sealant Strips W =,000 Hour admium Olive Drab Over lectroless Nickel Typ..35 (34.3) H Typ. Dia Typ. P inish Option (Typ.) and Term. rea ree of admium, Knurl or Ridges Mfr's Option J Polysulfide Strips TL I 08 0 2 4 6 8 lass 2.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS Dia.88 (.4).0 (25.7).3 (.7).26 (.0).38 (35.).5 (38.4).63 (4.4).76 (44.7).88 (47.8) 2.3 (54.) Dia able ntry 02 ±.00 (.3) N/ N/. (7.9).438 (.).500 (2.7).625 (5.9).625 (5.9).688 (7.5).750 (9.).875 (.2) Dia able ntry 03 ±.00 (.3). (7.9).438 (.).562 (4.3).625 (5.9).750 (9.).82 (.6).938 (23.8).000 (25.4).25 (.6).87 (.).89 (.6).92 (23.4).94 (23.9).96 (.4).98 (.9).00 (25.4).03 (26.2).05 (26.7).0 (27.9).6 (29.5).8 (30.0). (30.5). (3.0).25 (3.8).26 (.0).29 (.8).3 (33.3).34 (34.0).38 (35.) H.88 (30.2). (.5).406 (35.7).53 (38.9).656 (42.).78 (43.6).844 (46.8).938 (49.2) 2.093 (53.2) 2.53 (64.3) J.47 (.0).480 (37.6).542 (39.2).605 (40.8).667 (42.3).730 (43.9).792 (45.5).850 (47.0).97 (48.7) 2.042 (5.9). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-5
rimp Ring and anding ackshells S85049/85, S85049/86, and S85049/87 anding ackshells lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 : M85049/85 = Straight M85049/86 = 45 M85049/87 = 90 M85049/85-6 P 02 Self Locking oupling ntry inish N = lectroless Nickel P = admium Olive Drab over lectroless Nickel with Polysulfide Sealant Strips W =,000 Hour admium Olive Drab Over lectroless Nickel Typ..35 (34.3) Typ. Dia P inish Option (Typ.) and Term. rea ree of admium, Knurl or Ridges Mfr's Option K Dia Polysulfide Strips H J K Dia 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-6
S85049/85, S85049/86, and S85049/87 anding ackshells rimp Ring and anding ackshells 08 0 2 4 6 8 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.86 (2.8).99 (25.).6 (29.5). (.5).4 (35.8).52 (38.6).64 (4.7).77 (45.0).89 (48.0) TL I.87 (.).6 (29.5).90 (.9).9 (30.2).92 (23.4).2 (30.7).95 (.). (3.5).98 (.9).26 (.0).98 (.9).27 (.3).0 (25.7).30 (33.0).04 (26.4).33 (33.8).07 (27.2).35 (34.3) H.375 (34.9).437 (.5).562 (39.7).687 (42.8).750 (44.5).875 (47.6).938 (49.2) 2.062 (52.4) 2.25 (54.0) J.47 (.0).480 (37.6).553 (39.4).64 (4.0).678 (42.6).733 (44.0).796 (45.6).859 (47.2).99 (48.7) 08 0 2 4 6 8 TL II - Straight Only Dia ntry 0 ±.00 (.3) N/ N/. (7.9).438 (.).500 (2.7).625 (5.9).625 (5.9).688 (7.5).750 (9.) Dia ntry 02 ±.00 (.3). (7.9).438 (.).562 (4.3).625 (5.9).750 (9.).82 (.6).938 (23.8).000 (25.4) TL III - 45 and 90 Only K Dia ntry 02 K Dia ntry 03 ±.00 (.3) ±.00 (.3) 08 N/ 0 N/. (7.9) 2. (7.9).438 (.) 4 6 8.438 (.).500 (2.7).625 (5.9).625 (5.9).688 (7.5).750 (9.).562 (4.3).625 (5.9).750 (9.).82 (.6).938 (23.8).000 (25.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-7
rimp Ring and anding ackshells S85049/88, S85049/89, and S85049/90 anding ackshells lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 : M85049/88 = Straight M85049/89 = 45 M85049/90 = 90 M85049/88-7 P 02 Self Locking oupling ntry inish and Material Typ..35 (34.3) H Typ. Dia Typ. L and P inish Options (Typ.) and Term. rea ree of admium, Knurl or Ridges Mfr's Option Dia J Polysulfide Strips Dia TL I lass 2 9 M2 X - 6H M5 X - 6H 3 M8 X - 6H 5 M X - 6H 7 M25 X - 6H 9 M X - 6H 2 M3 X - 6H 23 M34 X - 6H 25 M37 X - 6H Dia.86 (2.8).99 (25.).6 (29.5). (.5).4 (35.8).52 (38.6).64 (4.7).77 (45.0).89 (48.0) 02 ±.00 (.3) N/ N/. (7.9).438 (.).500 (2.7).625 (5.9).625 (5.9).688 (7.5).750 (9.) Dia able ntry 03 ±.00 (.3). (7.9).438 (.).562 (4.3).625 (5.9).750 (9.).82 (.6).938 (23.8).000 (25.4).0 (25.7).03 (26.2).06 (26.9).08 (27.4). (.2).2 (.4).5 (29.2).7 (29.7). (30.5).6 (29.5).9 (30.2).2 (30.7). (3.5).26 (.0).27 (.3).30 (33.0).33 (33.8).35 (34.3) H.375 (34.9).437 (.5).562 (39.7).687 (42.8).750 (44.5).875 (47.6).938 (49.2) 2.062 (52.4) 2.25 (54.0) J.47 (.0).480 (37.6).553 (39.4).64 (4.0).678 (42.6).733 (44.0).796 (45.6).859 (47.2).99 (48.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. inish Option luminum Material N P W TL II inish Option omposite Material Not vailable M L J inish lectroless Nickel (Space rade) lectroless Nickel admium Olive Drab Over lectroless Nickel with Polysulfide Sealant Strips,000 Hour admium Olive Drab Over lectroless Nickel 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 44-8
Qwik-Ty Strain Reliefs Qwik-Ty Strain Reliefs lenair's Qwik-Ty strain reliefs offer a unique method of providing strain relief to open wire bundles used with circular connectors. The Qwik-Ty provides a low profile, reduced weight and simple installation. Installation is quick and secure, using either plastic tie straps or lacing tape. lenair s lenair Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS352 M85049/53 450S00 Straight Qwik-Ty Strain Relief 45-4* MS353 M85049/54 45000 45 Qwik-Ty Strain Relief 45-4* MS354 M85049/55 45000 90 Qwik-Ty Strain Relief 45-4* MS27668 M85049/56 450S00 Straight Qwik-Ty Strain Relief 45-5* MS27669 M85049/57 45000 45 Qwik-Ty Strain Relief 45-5* MS27670 M85049/63 45000 90 Qwik-Ty Strain Relief 45-5* M83723/50 ** 90 Qwik-Ty Strain Relief K 45-2 M83723/50 ** 45 Qwik-Ty Strain Relief K 45-2 M83723/50R ** Straight Qwik-Ty Strain Relief K 45-2 S85049/5 ** 45 Qwik-Ty Strain Relief, Self Locking with round Lug H 45-3 S85049/5S ** 45 Qwik-Ty Strain Relief, Self Locking H 45-3 S85049/6 ** 90 Qwik-Ty Strain Relief, Self Locking with round Lug H 45-3 S85049/6S ** 90 Qwik-Ty Strain Relief, Self Locking H 45-3 S85049/53 M85049/52 450S00 Straight Qwik-Ty Strain Relief 45-4 S85049/54 M85049/43 45000 45 Qwik-Ty Strain Relief 45-4 S85049/55 M85049/5 45000 90 Qwik-Ty Strain Relief 45-4 S85049/55 M85049/5S 45000 90 Qwik-Ty Strain Relief, Self Locking with round Lug 45-4 S85049/55S M85049/5S ** 90 Qwik-Ty Strain Relief, Self Locking 45-4 S85049/56 450S00 Str. Qwik-Ty Strain Relief 45-5 S85049/57 45000 45 Qwik-Ty Strain Relief 45-5 S85049/57 45000 45 Qwik-Ty Strain Relief, Self Locking with round Lug 45-5 S85049/57S ** 45 Qwik-Ty Strain Relief, Self Locking 45-5 S85049/63 45000 90 Qwik-Ty Strain Relief 45-5 S85049/63 45000 90 Qwik-Ty Strain Relief 45-5 S85049/63S ** 90 Qwik-Ty Strain Relief 45-5 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 45-
Qwik-Ty Strain Reliefs M83723/50 Qwik-Ty Strain Reliefs lenair onnector Designator K MIL-DTL-83723 Series II ngular unction R = Straight = 45 = 90 M83723/50 R N inish = lack nodize N = lectroless Nickel Dash No. Typ. Set Screw (Typ.) H D Typ.. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. MS37- Tie Strap or quivalent (Typical) J 08 0 2 3 4 5 6 7 8 lass 2.438 - UN.500 - UN.562 - UN.625 - UN.625 - UN.750 - UN.750 - UN.875 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.375-8 UN.625-8 UN D Dia.62 (5.7).73 (8.5).73 (8.5).86 (2.8).86 (2.8).98 (.9).98 (.9). (.2). (.2). (3.0).35 (34.3).47 (37.3).59 (40.4).97 (50.0) TL I able ntry.0 (6.).06 (26.9).295 (7.5).06 (26.9).375 (9.5).06 (26.9).400 (0.2).400 (0.2).482 (2.2).482 (2.2).60 (5.3).60 (5.3).7 (8.3).862 (2.9).970 (.6).082 (27.5). (3.5).2 (.4).2 (.4).30 (33.0).3 (33.3).30 (33.0).30 (33.0). (34.5).50 (38.).62 (4.).68 (42.7).7 (43.4).74 (8.8).74 (8.8).74 (8.8).5 (38.4).74 (8.8) 2.0 (5.) 2.02 (5.3) 2.0 (5.) 2.0 (5.) 2.7 (55.) 2.25 (57.2) 2.25 (57.2) 2.33 (59.2) 2.33 (59.2) H.7 (8.0).7 (8.0).7 (8.0).7 (8.0).7 (8.0).7 (8.0).7 (8.0).7 (8.0).7 (8.0).73 (8.5).74 (8.8).63 (6.0).63 (6.0).63 (6.0) J.880 (.4).940 (23.9).940 (23.9).000 (25.4).000 (25.4).3 (33.5).3 (33.5).370 (34.8).370 (34.8).470 (37.3).50 (38.4).570 (39.9).640 (4.7).70 (43.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 45-2
S85049/5 and S85049/6 Qwik-Ty Strain Reliefs Qwik-Ty Strain Reliefs lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 Self-Locking oupling Typ. M85049/5 = 45 M85049/6 = 90 onfiguration = Self-Locking with round Lug S = Self-Locking without round Lug M85049/5 W inish N = lectroless Nickel W =,000 Hour admium Olive Drab Over lectroless Nickel.690 (7.5) Dia Dia H round Lug Typical on M85049/5 and M85049/6 only MS37- Tie Strap or quivalent (Typical) 9 3 5 7 9 2 23 25 lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.86 (2.8).94 (23.9).6 (29.5). (.5).4 (35.8).52 (38.6).64 (4.7).77 (45.0).89 (48.0) TL I able ntry M85049/5S.264 (6.7).03 (26.2).392 (0.0).03 (26.2).506 (2.9).03 (26.2).63 (6.0).09 (27.7).756 (9.2). (.2).845 (2.5).2 (30.7).970 (.6).26 (.0).095 (27.8).30 (33.0).2 (3.0).34 (34.0) M85049/5.2 (30.7).2 (30.7).39 (35.3).39 (35.3).39 (35.3).39 (35.3).39 (35.3).39 (35.3).39 (35.3) M85049/6 H. (3.0).29 (.8).62 (4.).66 (42.2).72 (43.7).72 (43.7).79 (45.5).85 (47.0).9 (48.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 45-3 45 I Qwik-Ty SR.p65 3 9/2/08, 8:43 PM
Qwik-Ty Strain Reliefs Typ. lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 S85049/53, S85049/54, and S85049/55 Qwik-Ty Strain Reliefs M85049/53 = Straight M85049/54 = 45 M85049/55 = 90 M85049/55 W onfiguration = Non-Self-Locking with round Lug (/55 Only) S = Self-Locking without round Lug (/55 Only) T = Self-Locking with round Lug Use Dash for Non-Self-Locking H inish = lack nodize W =,000 Hr. admium Olive Drab Over lectroless Nickel OR NW DSIN PPLITIONS US M85049/43 (45 ), M85049/5 (90 ), and M85049/52 (Str.), J Self Lock. Non-Self Lock. Self Locking. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. MS37- Tie Strap or quivalent (Typical) round Lug ( Option) K 03 08 0 2 4 6 8 lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS Dia.78 (9.8).66 (6.8).78 (9.8).94 (23.9).05 (26.7). (3.5).38 (35.).50 (38.).63 (4.4).75 (44.5).97 (50.0) * onsult factory for availability Dia.0 (25.7).89 (.6).0 (25.7).4 (29.0).26 (.0).39 (35.3).5 (38.4).64 (4.7).76 (44.7).89 (48.0) 2.4 (54.4) TL I able ntry.260 (6.6).260 (6.6).5 (9.3).50 (2.7).575 (4.6).700 (7.8).779 (9.8).904 (23.0).029 (26.).44 (29.).379 (35.0).903 (.9).903 (.9).903 (.9).903 (.9).973 (.7).973 (.7).973 (.7).259 (.0).379 (35.0).509 (38.3).509 (38.3) H.8 (30.0).8 (30.0).8 (30.0).8 (30.0).8 (30.0).8 (30.0).8 (30.0).43 (.3).43 (.3).43 (.3).48 (.0) J.73 (8.5).73 (8.5).73 (8.5).73 (8.5).73 (8.5).73 (8.5).73 (8.5).75 (9.).75 (9.).75 (9.).75 (9.) K.29 (.8).29 (3.0).29 (.8).62 (4.).66 (42.2).72 (43.7).72 (43.7).79 (45.5).85 (47.0).9 (48.5) 2.06 (52.3) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 45-4 45 I Qwik-Ty SR.p65 4 8/6/08, 6:05 PM
S85049/56, S85049/57, and S85049/63 Qwik-Ty Strain Reliefs Qwik-Ty Strain Reliefs lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 Typ. M85049/56 = Straight M85049/57 = 45 M85049/63 = 90 M85049/63 6 W onfiguration = Self-Locking with round Lug (/57 and /63 Only) S = Self-Locking without round Lug (/57 and /63 Only) Use Dash for Non-Self Locking H Self- Locking inish = lack nodize N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel K Self Lock. / * / * * Non-Self Locking Self Locking. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. MS37- Tie Strap or quivalent (Typical) round Lug ( Option) J 8 0 2 4 6 8 Ser. Ref. 9 3 5 7 9 2 23 25 lass 2.438- UN.562- UN.688- UN.83- UN.938- UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.75 (9.).85 (2.6).00 (25.4).0 (27.9).25 (3.8).40 (35.6).50 (38.).65 (4.9).75 (44.5) Dia.86 (2.8).98 (.9).6 (29.5). (.5).4 (35.8).52 (38.6).64 (4.7).77 (45.0).89 (48.0) TL I able ntry.264 (6.7).392 (0.0).506 (2.9).63 (6.0).756 (9.2).845 (2.5).970 (.6).095 (27.8).2 (3.0).895 (.7).895 (.7).955 (.3).35 (.8).35 (.8).95 (30.4).5 (33.7).445 (.7).585 (40.3) H.2 (30.7).2 (30.7).39 (35.3).39 (35.3).39 (35.3).39 (35.3).39 (35.3).39 (35.3).39 (35.3) J. (3.0).29 (.8).62 (4.).66 (42.2).72 (43.7).72 (43.7).79 (45.5).85 (47.0).9 (48.5) K.63 (6.0).63 (6.0).63 (6.0).70 (7.8).70 (7.8).73 (8.5).73 (8.5).73 (8.5).73 (8.5) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 45-5
The Space Shuttle Orbiter escapes earth at the speed of 7,000 miles per hour. ut a damaged connector can scratch the mission in the blink of an eye. lenair's Sav-on onnector Savers are designed to mate with circular and rectangular Mil Spec connectors and test cables which are subject to repetitive mating cycles during manufacture and test. One of the most dramatic applications of our Sav-on connectors is on the Space Shuttle Orbiter where they provide protection for the umbilical connectors from lift-off to touch-down on every mission. lenair's Sav-ons are available in general duty, environmental and highperformance versions, and provide outstanding reliability and protection with only minimal affect on circuit resistance. Visit us at for order information. ommercial and Mil Spec connector accessories onvoluted tubing and metal-core conduit lectrical and fiber optic cable assemblies omposite thermoplastic components Microminiature connectors and accessories ackshell assembly and termination tools 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany N o r d i c rance Italy Spain
Rectangular ackshells Rectangular ackshells lenair's selection of rectangular backshells provide strain relief and environmental protection for rack and panel style connectors. lenair s Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Interface Number M83733/5 M85049/ ** MI Rectangular ackshell MIL-DTL-83733 50-2 M83733/6 M85049/44 ** Rectangular Strain Relief ackshell MIL-DTL-83733 50-3 S85049/ ** MI Rectangular ackshell MIL-DTL-83733 50-2 S85049/44 ** Rectangular Strain Relief ackshell MIL-DTL-83733 50-3 S85049/48- ** Rectangular Strain Relief ackshell MIL-DTL-308 50-4 S85049/48-2 ** Rectangular Strain Relief ackshell MIL-DTL-308 50-5 S85049/48-3 ** Rectangular Strain Relief ackshell MIL-DTL-308 50-6 S85049/50 ** 90 Rectangular Strain Relief ackshell MIL-DTL-308 50-7 ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 50-
Rectangular ackshells S85049/ and M83733/5 Rectangular ackshells onnector Interface MIL-DTL-83733 Metalastic ntry asket able ntry M85049/-2 Dash No. Superceded Part Number M83733/5-2 Dash No. 3.75 (95.3) Ref. Metalastic ackshell asket 2.02 (5.3).2-40 UN x.437 Long Screw with Lockwasher (4 places).03 (26.2).85 (.7) Dash No. 2 3 4 2.26 (54.0) 2.26 (54.0) 3.426 (87.0) 3.426 (87.0) TL I.900 (48.3).900 (48.3) 3.0 (8.3) 3.0 (8.3) Min.500 (2.7).625 (5.9).500 (2.7).625 (5.9) able ntry.625 (5.9).750 (9.).625 (5.9).750 (9.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 50-2
S85049/44 and M83733/6 Rectangular ackshells Rectangular ackshells onnector Interface MIL-DTL-83733 D Jacketed oating M85049/44-3 Wire Rope Dash No. Superceded Part Number M83733/6-3.2-40 UN x.437 Long Screw with Lockwasher (4 places) Dash No..50 (38.) ±.02 (.5).88 (.8) *.03 (26.2) *.6 (2.9) Dia Hole Typ. 4 Places M85049/44 Silicone ushions M83733/6 Neoprene ushions.062 (.6) Thick * imum Dimension with Halves ottomed Dash No. 2 3 4 ±.062 (.57) 2.437 (6.90) 3.750 (95.25) 2.437 (6.90) 3.750 (95.25) * No Wire Rope Supplied TL I ±.005 (.3).895 (48.3) 3.95 (8.5).895 (48.3) 3.95 (8.5) ±.062 (.57).700 (43.8) 3.000 (76.).700 (43.8) 3.000 (76.) D ±.062 (.57) * * 0.375 (263.53) 0.375 (263.53). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 50-3
Rectangular ackshells S85049/48- Rectangular ackshells onnector Interface MIL-DTL-308 able ntry in Dash No. M85049/483 inish = Yellow hromate over admium able ntry in H Dash No. 2 3 4 5 ±.05 (0.4).3 (30.6).53 (38.9) 2.078 (52.8) 2.78 (69.0) 2.625 (66.7) ±.005 (.).984 (25.0). (33.3).852 (47.0) 2.500 (63.5) 2.406 (6.) TL I ±.05 (0.4).375 (9.5).73 (8.).000 (25.4).375 (34.9).406 (35.7) ±.05 (0.4).375 (9.5). (7.9). (7.9). (7.9).406 (0.3) ±.05 (0.4).750 (9.).750 (9.).000 (25.4).000 (25.4).25 (.6) H.250 (3.8).250 (3.8).563 (39.7).563 (39.7).688 (42.9). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Steel. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 50-4
S85049/48-2 Rectangular ackshells Rectangular ackshells onnector Interface MIL-DTL-308 M85049/48-2-3 Dash No. inish = Yellow hromate over admium.2-40 UN-2 H D. (3.0) ±.005 (0.) Dia. TL I Dash No. 2 3 4 5 ±.05 (0.4).8 (30.7).53 (38.9) 2.078 (52.8) 2.78 (69.0) 2.625 (66.7) ±.005 (.).984 (25.0). (33.3).852 (47.0) 2.500 (63.5) 2.406 (6.) D.406 (0.3).406 (0.3).593 (5.).78 (8.2).82 (.6) ±.05 (0.4).66 (6.8).984 (25.0).55 (38.5) 2.7 (55.) 2.093 (53.2) ±.030 (0.8).03 (26.2).03 (26.2).062 (27.0).062 (27.0).062 (27.0) H ±.05 (0.4).344 (8.7).344 (8.7).344 (8.7).344 (8.7).438 (.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Steel. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 50-5
Rectangular ackshells S85049/48-3 Rectangular ackshells onnector Interface MIL-DTL-308 M85049/48-3-3 Dash No. inish = Yellow hromate over admium.484 (2.3) ±.05 (0.4) H Dash No. 2 3 4 5 # of Screws 2 2 3 3 ±.05 (0.4).53 (38.9) 2.078 (52.8) 2.78 (69.0) 2.625 (66.7) ±.05 (0.4).500 (2.7).500 (2.7).500 (2.7).609 (5.5) TL I ±.005 (.). (33.3).852 (47.0) 2.500 (63.5) 2.406 (6.).679 (7.2).679 (7.2).679 (7.2).703 (7.9) ±.05 (0.4).09 (27.7).63 (4.4) 2.2 (58.0) 2.5 (56.0) H ±.05 (0.4).442 (.2).442 (.2).442 (.2).565 (4.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Steel. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 50-6
S85049/50 Rectangular ackshells Rectangular ackshells onnector Interface MIL-DTL-308 Dash No. M85049/50-3 inish = Yellow hromate over admium D able lamp Dash No. 2 3 4 5 ±.05 (0.4).3 (30.6).53 (38.9) 2.078 (52.8) 2.78 (69.0) 2.625 (66.7) ±.030 (0.8).78 (8.2).78 (8.2).968 (.6).87 (30.).250 (3.8) TL I ±.005 (0.).984 (25.0). (33.3).852 (47.0) 2.500 (63.5) 2.406 (6.) D.467 (.9).467 (.9).467 (.9).467 (.9).592 (5.0) ±.030 (0.8).437 (.).437 (.).625 (5.9).82 (.6).906 (23.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Steel. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 50-7
Stop Toolin' round inding the right tool for the job just got a little bit easier N obody can grasp the ins-and-outs of interconnect tool design and manufacturing without a full understanding of cable harness assembly. t lenair, we not only manufacture the connectors, backshells, cables and enclosures which go into interconnect cable harnesses, we run a top-flight cable assembly service of our own. nd we ve drawn on this extensive experience to design and build a complete family of specialized backshell assembly tools for most Mil-Standard circular connectors, as well as connector wrenches, mini-strap wrenches, universal connector holding tools and braid termination tools for production use and field maintenance. ontact lenair for more information or for a copy of our complete lenair ackshell ssembly Tools, anding Tools and ccessories atalog. 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany Nordic rance Italy Spain
Tools Tools Mil-Spec onnector wrenches, plug and receptacle holders and accessories are required for expert assembly of interconnect systems. lenair manufacturers a wide range of connector wrenches and other assembly tools. ontact lenair or your local sales representative for a copy of the lenair ackshell ssembly Tools, anding Tools and ccessories catalog. lenair s Military ommercial Page Specification atalog P/N Description Number MS3480 T38 onnector Wrench for MIL-DTL-505 60-2 and MIL-DTL-83723 Series 2 MS348 T39 onnector Wrench for MIL-DTL-26482 Series and 2, 60-3 MIL-DTL-83723 Series I, and NS 599 MS3482 T6 onnector Wrench MIL--85 Series and 3 60-4 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 60-0
Tools MS3480 - onnector Wrench MIL-DTL-505 and MIL-DTL-83723 Series II MS3480- Dash No. 5.625 (42.9) pprox. LNIR, IN. D.375 (9.5) pprox Dash No. 8 0 2 4 6 8 40 8S 0S, 0SL 2, 2S 4, 4S 6, 6S 8 40 lass 2 /2 - UN 5/8 - UN 3/4 - UN 7/8 - UN - UN /8-8 UN /4-8 UN 3/8-8 UN /2-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN TL I Dia. ±.060 (.5).250 (3.8).250 (3.8).250 (3.8).250 (3.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) 2.750 (69.9) pprox..78 (8.2).78 (8.2).92 (23.4).92 (23.4).92 (23.4).92 (23.4).92 (23.4).92 (23.4).92 (23.4).92 (23.4).92 (23.4).92 (23.4).92 (23.4) D pprox..687 (7.4).687 (7.4).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.) +0 -.05 (.4).370 (9.4).448 (.4).557 (4.).682 (7.3).807 (.5).9 (23.7).058 (26.9).82 (30.0).307 (33.2).526 (38.8).776 (45.).995 (50.7) 2.5 (57.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: luminum alloy with electroless nickel finish. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 60-2
MS348 - onnector Wrench MIL-DTL-26482 Series I and II, MIL-DTL-83723 Series I, and NS 599 Tools MS348- Dash No. 5.625 (42.9) pprox. LNIR, IN..375 (9.5) pprox 8 0 2 4 6 8 TL I Dim. ±.060 (.5).250 (3.8).250 (3.8).250 (3.8).250 (3.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) Dia. Ref..2 (9.2).490 (2.4).607 (5.4).7 (8.6).857 (2.8).962 (.4).087 (27.6). (30.8).337 (34.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: luminum alloy with electroless nickel finish. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 60-3
Tools MS3482 - onnector Wrench MIL-DTL-85 Series I and III MS3482-8-6 Dash No. Polarization Position (, 2, 3, 4, 5, 6) Sq. 5.625 (42.9) pprox. LNIR, IN..375 (9.5) pprox 8 0 4 6 8 Dim. ±.060 (.5).250 (3.8).250 (3.8) 2.000 (50.8) 2.000 (50.8) 2.000 (50.8) TL I Dia. +.00 (.) -.008 (.2).38 (9.7).506 (2.9).756 (9.2).882 (.4).006 (25.6) Dia. ±.003 (.).389 (9.9).54 (3.).764 (9.4).890 (.6).04 (25.8). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: luminum alloy with electroless nickel finish. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 60-4
"" Nuts "" Nuts This section describes the various backshells without strain relief for use with circular connectors. (These are most commonly referred to as "" Nuts.) lenair s Military Superceeding ommercial onnector Page Specification Part Number atalog P/N Description Designator Number MS346 M85049/3 60S0 Nut 6-7 M840/23 ** Nut 6-2 M38999/ M85049/27 60S0 Nut 6-6* M85/6 60JS02 Nut J 6-3 M83723/5N M85049/3 60S0 Nut 6-7 M83723/35N ** Nut K 6-4 S85049/4S ** Nut, Self-Locking H 6-5 S85049/27 60S0 Nut 6-6 S85049/27S ** Nut, Self-Locking 6-6 S85049/3 60S0 Nut 6-7 S85049/3S ** Nut, Self-Locking 6-7 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6-
"" Nuts M840/23 "" Nuts lenair onnector Designator MIL--840 M840/23 J W Material and inish W = luminum, admium Olive Drab over lectroless Nickel.78 (8.2) ±.062 (.6).8 (5.8) Ref. Ring aptive oupling Nut learance Hole or.0 (.8) Dia. Safety Wire (3 Places part) D H J Ref. 3 5 7 9 23 25 29 33 TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS Dia.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6-2
M85/6 "" Nuts "" Nuts lenair onnector Designator J MIL--85 M85/6-0 Inactive for New Design.44 (.2) Dia Dia 08 0 4 6 8 TL I lass 2 Dia ±.00 (.3).500 - UN.625 - UN.875 - UN.000 - UN.25 - UN.542 (3.8).669 (7.0).95 (23.2).043 (26.5).69 (29.7) Dia ±.005 (.).295 (7.5).4 (0.7).670 (7.0).794 (.2).930 (23.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material is 03 nylon plastic (black). 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6-3
"" Nuts M83723/35N "" Nuts lenair onnector Designator K MIL-DTL-83723 Series II Dash No. M83723/35N inish = lack nodize R = lectroless Nickel rounding Screws (2) (Typical) 08 0 3 5 6 7 8 40 Ref. 8S 0S 0SL 2S 4S 6 6S 8 40 lass 2.438 - UN.500 - UN.562 - UN.625 - UN.750 - UN.875 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.375-8 UN.625-8 UN.875-6 UN 2.25-6 UN 2.375-6 UN TL I Dia.59 (5.0).65 (6.5).73 (8.5).77 (9.6).9 (23.).03 (26.2).03 (26.2).7 (29.7).30 (33.0).42 (.).54 (39.).80 (45.7) 2.04 (5.8) 2.27 (57.7) 2.78 (70.6).780 (9.8).780 (9.8).780 (9.8).780 (9.8).780 (9.8).970 (.6).780 (9.8).050 (26.7).050 (26.7).050 (26.7).970 (.6).970 (.6).970 (.6).970 (.6).450 (.8).257 (6.5).30 (7.9).390 (9.9).45 (0.5).497 (2.6).66 (5.6).66 (5.6).735 (8.7).875 (.2).983 (25.0).095 (27.8).255 (3.9).525 (38.7).760 (44.7) 2.0 (5.3).900 (.9).900 (.9).980 (.9).995 (25.3).60 (29.5).260 (.0).260 (.0).455 (37.0).580 (40.).580 (40.).890 (48.0).890 (48.0) 2.25 (56.3) 2.405 (6.) 2.78 (70.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6-4
S85049/4S "" Nuts "" Nuts lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/4S W inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel.38 (9.7) Self Locking oupling.660 (6.8) Self-Locking oupling Nut 9 3 5 7 9 2 23 25 TL I ode Ref. lass 2 M2 X - 6H M5 X - 6H M8 X - 6H D M X - 6H M25 X - 6H M X - 6H M3 X - 6H H M34 X - 6H J M37 X - 6H Dia.86 (2.8).94 (23.9).6 (29.5). (.5).4 (35.8).52 (38.6).64 (4.7).77 (45.0).89 (48.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6-5
"" Nuts S85049/27 "" Nuts lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 S = Self-Locking Use Dash (-) for Non-Self Locking M85049/27 S 0 N inish N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel Self- Locking Self-Locking 8 0 2 4 6 8 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN TL I Dia.274 (7.0).42 (0.5).526 (3.4).65 (6.5).776 (9.7).882 (.4).006 (25.6). (.8).257 (3.9) Dia.859 (2.8).984 (25.0).56 (29.4). (.5).406 (35.7).56 (38.5).64 (4.7).766 (44.9).89 (48.0).590 (5.0).590 (5.0).590 (5.0).590 (5.0).590 (5.0).590 (5.0).590 (5.0).590 (5.0).590 (5.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6-6
S85049/3, MS346 and M83723/5N "" Nuts "" Nuts lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 Thread Self-Locking S = Self-Locking Use Dash (-) for Non-Self Locking M85049/3 S N MS346-0 (Non-Self-Locking Only) Dash No. Style inish = lack nodize N = lectroless Nickel W =,000 Hr. admium Olive Drab Over lectroless Nickel SUPRDD SP. Material and inish Designator = luminum, 500 Hour ad. Olive Drab Over lectroless Nickel = luminum, admium Olive Drab = luminum, lack nodize N = luminum, lectroless Nickel M83723/5N-0 SUPRDD SP. (Non-Self-Locking Only) Dash No. inish Designator = Non-onductive, lack nodize R = onductive, lectroless Nickel 3 8 0 2 4 6 8 40 44 48 6 lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN TL I Dia.270 (6.9).270 (6.9).375 (9.5).5 (3.0).585 (4.9).70 (8.0).789 (.0).94 (23.2).039 (26.4).54 (29.3).389 (35.3).635 (4.5).850 (47.0) 2.065 (52.5) 2.3 (58.9) 2.570 (65.3).94 (30.3).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).70 (8.0).890 (.6).890 (.6).890 (.6).890 (.6).890 (.6).890 (.6) Dia.885 (.5).00 (25.7).35 (.8).260 (.0).385 (35.2).50 (38.4).635 (4.5).760 (44.7).885 (47.9) 2.35 (54.2) 2.395 (60.8) 2.635 (66.9) 2.885 (73.3) 3.35 (79.6) 3.385 (86.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 6-7
It's cold. It's wet. It's out in the middle of nowhere. Just the Place for lenair's eo-marine onnectors and ables. D esigned for use in oceanographic, geophysical and other severe environments, lenair's line of eo-marine connectors and cables withstand hydrostatic pressures up to 5,000 psi and exposure to extreme temperatures and corrosives. Our eo-marine products have been used in offshore oil drilling, seabed exploration, and pipeline inspection systems, and are available as either discrete connectors, accessories and cable or as engineered cable assemblies. eo-marine connectors and cables eo-marine connectors & ulkhead feed-throughs omplete molded eo- Marine cable assemblies eo-marine castellated and knurled coupling rings Nickel aluminum bronze & stainless steel construction High-density eo-marine insert arrangements 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany Nordic rance Italy Spain
Strain Reliefs Strain Reliefs lenair offers a comprehensive selection of strain reliefs for circular connectors. Straight and angular versions are offered for most connector series. lenair s onnector Military Superceeding ommercial Interface or Page Specification Part Number atalog P/N Description Designator Number MS3057 M85049/4 6-053 Style Straight Strain Relief *** 62-3 MS3057 M85049/ 6-053 Style Straight Strain Relief *** 62-9 MS3057 M85049/2 6-053 Style Straight Strain Relief *** 62-0 MS3057D M85049/42 6-053 Style H Straight Strain Relief *** 62-4 MS345 M85049/43 6047 45 Strain Relief *** 62-5* MS347 M85049/52-6S046 Straight Strain Relief 62- MS348 M85049/5-6046 90 Strain Relief 62- MS2729 6S050 Straight Strain Relief 62-2 MS27342-2 M85049/49-2 ** Straight Strain Relief 62-9* MS27506 M85049/49-2 6S054 Straight Strain Relief 62-9* MS27507 M85049/47 602 90 Strain Relief 62-8 MS27558 ** 90 Strain Relief 62-3 MS27559 ** 90 Strain Relief 62-4 M840/ 6S05 Straight Strain Relief 62-5 M840/2 605 90 Strain Relief 62-6 M840/3 605 45 Strain Relief 62-7 M85/3 6JS00 Straight Strain Relief J 62-8 M83723/5 M85049/5-6046 90 Strain Relief 62- M83723/5S M85049/52-6S046 Straight Strain Relief 62- S85049/ 6-053 Style Strain Relief *** 62-9 S85049/2 6-053 Style Strain Relief *** 62-0 S85049/38 6HS0 Straight Strain Relief H 62- S85049/38S 6HS048 Straight Strain Relief, Self-Locking H 62- S85049/38SS ** Straight Strain Relief, Self-Locking (Steel) H 62- S85049/39 6H0 90 Strain Relief H 62-2 S85049/39S 6H048 90 Strain Relief, Self-Locking H 62-2 S85049/39SS ** 90 Strain Relief, Self-Locking (Steel) H 62-2 S85049/4 6-053 Style Straight Strain Relief *** 62-3 S85049/42 6-053 Style H Straight Strain Relief *** 62-4 S85049/43 6047 45 Strain Relief 62-5 S85049/45 ** Straight Strain Relief 62-6 S85049/46 ** 90 Strain Relief 62-7 S85049/47 602 90 Strain Relief 62-8 S85049/47S 6048 90 Strain Relief, Self Locking 62-8 S85049/47SS 6048Z 90 Strain Relief, Self Locking (Steel) 62-8 S85049/49-2 6S02 Straight Strain Relief 62-9 S85049/49-2S 6S048 Straight Strain Relief, Self-Locking 62-9 S85049/49-2SS 6S048Z Straight Strain Relief, Self-Locking (Steel) 62-9 S85049/5-6046 90 Strain Relief 62- S85049/5S 6048 90 Strain Relief, Self-Locking 62- S85049/52-6S046 Straight Strain Relief 62- S85049/52S 6S048 Straight Strain Relief, Self-Locking 62- S85049/9 6HS042 Straight Strain Relief, omposite Material H 62- S85049/92 6H042 90 Strain Relief, omposite Material H 62- *Page Number of Superceeding Part Number **onsult actory ***MS V Thread - eneral Duty nd ell 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-
Strain Reliefs MS2729 Strain Relief lenair onnector Designator MIL-DTL-26500 Dash No. MS2729-40 INTIV OR NW DSIN OR MODIITION O XISTIN QUIPMNT Dash No. or Use With lass onnectors R and 0 2 3 30 4 40 5 50 6 60 3 70 4 80 5 90 Ref. 0 2 4 6 8 8 lass 2.562 - UN.750 - UN.82 - UN.938 - UN.062-8 UN. - 8 UN.438 - UN.88-8 UN.438-8 UN TL I.73 (8.6).99 (23.3).98 (.9).06 (.).23 (3.3).48 (37.6).606 (5.4).356 (34.4).606 (40.8) ±.05 (.4).935 (23.7).935 (23.7).70 (29.7).70 (29.7).70 (29.7).70 (29.7).935 (23.7).70 (29.7).70 (29.7).94 (23.2).026 (26.).090 (27.7).250 (3.8).358 (34.5).604 (40.7).789 (.0).48 (37.6).729 (43.9) Dia ±.005 (.).270 (6.9).400 (0.2).460 (.7).60 (5.5).690 (7.5).940 (23.9).86 (4.7).86 (.7).066 (27.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. inish: nodize. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-2
MS27558 Strain Relief Strain Reliefs lenair onnector Designator MIL-DTL-26500 Dash No. MS27558-4 Set Screw Wire Holes (3 qually Spaced) H Dash No. * 2 3 4 5 6 7 8 9 Ref. lass 2 8.437 - UN 0.562 - UN 2.750 - UN 4.82 - UN 6.938 - UN 8.062-8 UN.88-8 UN. - 8 UN.438-8 UN * onsult actory.672 (7.).797 (.2).06 (25.8).0 (.2).234 (3.3).0 (34.5).485 (37.7).60 (40.9).735 (44.) TL I.0 (30.5).3 (33.5).3 (33.5).487 (37.8).470 (37.3).588 (40.3).759 (44.7).759 (44.7) 2.027 (5.5).602 (5.3).650 (6.5).740 (8.8).775 (9.7).830 (2.).897 (.8).955 (.3).05 (25.8).077 (27.4).892 (.7).072 (27.2).072 (27.2).08 (.).08 (.).233 (3.3).477 (37.5).477 (37.5).727 (43.9) H Dia.0 (6.).5 (9.3).5 (9.3).55 (3.).55 (3.).640 (6.3).775 (9.7).775 (9.7).060 (26.9). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. inish: nodize. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-3
Strain Reliefs MS27559 Strain Relief lenair onnector Designator MIL-DTL-26500 Dash No. MS27559-4 Set Screw Wire Holes (3 qually Spaced) H Dash No. 2 3 4 5 6 7 8 9 Ref. 8 0 2 4 6 8 lass 2.437 - UN.562 - UN.750 - UN.82 - UN.938 - UN.062-8 UN.88-8 UN. - 8 UN.438-8 UN.672 (7.).797 (.2).06 (25.8).0 (.2).234 (3.3).0 (34.5).485 (37.7).60 (40.9).735 (44.) TL I.73 (29.8).293 (.8).293 (.8).460 (37.).443 (.7).56 (39.6).7 (44.0).7 (44.0) 2.000 (50.8).602 (5.3).650 (6.5).740 (8.8).775 (9.7).830 (2.).897 (.8).955 (.3).05 (25.8).077 (27.4).892 (.7).072 (27.2).072 (27.2).08 (.).08 (.).233 (3.3).477 (37.5).477 (37.5).727 (43.9) H Dia. (5.).3 (8.).3 (8.).452 (.5).508 (2.9).57 (4.5).748 (9.0).748 (9.0).996 (25.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. inish: nodize. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-4
M840/ Strain Relief Strain Reliefs lenair onnector Designator MIL-DTL-840 Dash No. M840/ J W Material and inish Designator W = luminum, admium Olive Drab over lectroless Nickel.8 (5.79) Ref. able ntry Wire Holes (3 qually Spaced) Telescoping Screw and Lockwasher Designator D H J Ref. 3 5 7 9 23 25 29 33 lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS TL I.0 (26.).09 (27.7).4 (29.0).09 (27.7).263 (.).09 (27.7).387 (35.2).6 (30.6).53 (38.4).3 (33.5).703 (43.3).445 (.7).825 (46.4).570 (39.9) 2.43 (54.4).72 (43.7) 2.9 (59.2).908 (48.5).903 (.9).977 (.8).5 (29.2). (.5).406 (35.7).576 (40.0).666 (42.3) 2.046 (52.0) 2.9 (56.) losed.77 (4.5).77 (4.5).29 (7.4).348 (8.8).429 (0.9).523 (3.3).643 (6.3).704 (7.9) able ntry Open.6 (7.3).6 (7.3).46 (0.6).476 (2.).626 (5.9).83 (2.).956 (.3).08 (27.5).87 (30.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-5
Strain Reliefs M840/2 Strain Relief lenair onnector Designator MIL--840 Designator M840/2 J W Material and inish Designator W = luminum, admium Olive Drab over lectroless Nickel.8 (5.79) Ref. Wire Holes (3 qually Spaced) Telescoping Screw and Lockwasher able ntry TL I Designator D H J Ref. 3 5 7 9 23 25 29 33 lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2).07 (27.2).07 (27.2).0 (.5).392 (35.4).57 (38.5).642 (4.7).767 (44.9).905 (48.4).968 (50.0).903 (.9).977 (.8).5 (29.2). (.5).406 (35.7).576 (40.0).666 (42.3) 2.046 (52.0) 2.9 (56.).929 (23.6).929 (23.6).056 (26.8).233 (3.3).296 (.9).358 (34.5).4 (.).634 (4.5).859 (47.2) able ntry Min.77 (4.5).6 (7.3).77 (4.5).6 (7.3).46 (0.6).29 (7.4).476 (2.).348 (8.8).626 (5.9).429 (0.9).83 (2.).523 (3.3).956 (.3).643 (6.3).08 (27.5).704 (7.9).87 (30.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-6
M840/3 Strain Relief Strain Reliefs lenair onnector Designator MIL--840 Designator M840/3 J W Material and inish Designator W = luminum, admium Olive Drab over lectroless Nickel.8 (5.79) Ref. Wire Holes (3 qually Spaced) Telescoping Screw and Lockwasher able ntry Designator D H J Ref. 3 5 7 9 23 25 29 33 lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2) TL I.650 (4.9).650 (4.9).765 (44.8).874 (47.6).98 (48.7).962 (49.8) 2.006 (5.0) 2.30 (58.4) 2.389 (60.7).903 (.9).977 (.8).5 (29.2). (.5).406 (35.7).576 (40.0).666 (42.3) 2.046 (52.0) 2.9 (56.).929 (23.6).929 (23.6).056 (26.8).233 (3.3).296 (.9).358 (34.5).4 (.).634 (4.5).859 (47.2) able ntry Min.77 (4.5).6 (7.3).77 (4.5).6 (7.3).46 (0.6).29 (7.4).476 (2.).348 (8.8).626 (5.9).429 (0.9).523 (3.3).83 (2.).956 (.3).643 (6.3).08 (27.5).704 (7.9).87 (30.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-7
Strain Reliefs M85/3 Strain Relief lenair onnector Designator J MIL--85 Series, 2, 3 & 4 V959 M85/3-6 dapter onnector lass Designator = lasses, H and P = lasses,,,, and T able ntry 08 0 4 6 8 lass 2.500 - UN.625 - UN.875 - UN.000 - UN.25 - UN.250 - UN.375 - UN.500 - UN.375 (34.9).375 (34.9).375 (34.9).375 (34.9).375 (34.9).452 (.9).452 (.9).452 (.9) TL I.775 (9.7).955 (.3).45 (29.). (30.7).330 (33.8).470 (37.3).580 (40.).7 (43.7) Min.062 (.6).25 (3.2).375 (9.5).500 (2.7).625 (5.9).750 (9.).750 (9.) able ntry.25 (3.2).500 (2.7).625 (5.9).750 (9.).875 (.2).000 (25.4).25 (.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-8
S85049/ and MS3057 Strain Reliefs Strain Reliefs MIL-DTL-505 MS V Thread (Mates to eneral Duty ndbell) M85049/-2 Dash No. SUPRDD SPIITION MS3057-6 Dash No. H Thread Dash No. 3 4 6 8 0 2 6 40 onn. Ref.(s) 8S, 0S 0SL, 2S, 2 4S, 4 6S, 6 8,, 40 44 48 Thread lass 2 /2 - UN 5/8 - UN 3/4 - UN 7/8 - UN - UN 3/6-8 UN 7/6-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN 3-6 UN TL I.03 (26.2).03 (26.2).03 (26.2).03 (26.2).094 (27.8).29 (3.0).29 (3.0).344 (34.).547 (39.3).547 (39.3).734 (44.0).78 (45.2) Dia.82 (.6).937 (23.8).062 (27.0).88 (30.2). (33.3).562 (39.7).750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.82 (7.4) 3. (84.) H Min.23 (5.9).35 (8.0).440 (.2).55 (3.).64 (5.6).738 (8.7).926 (23.5).0 (30.5).3 (34.6).6 (40.9).865 (47.4) 2.5 (60.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. inish on M85049/ is cadmium olive drab over electroless nickel (,000 hour salt spray). 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-9
Strain Reliefs S85049/2 and MS3057 Strain Reliefs MIL-DTL-505 MS V Thread (Mates to eneral Duty ndbell) M85049/2-2 Dash No. SUPRDD SPIITION MS3057-6 Dash No. Thread lamping ars H (See Note 3) able ntry Dash No. 3 4 6 8 0 2 6 onn. Ref.(s) 8S, 0S 0SL, 2S, 2 4S, 4 6S, 6 8,, 40 44 Thread lass 2 /2 - UN 5/8 - UN 3/4 - UN 7/8 - UN - UN 3/6-8 UN 7/6-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN TL I.375 (34.9).375 (34.9).375 (34.9).375 (34.9).437 (.5).437 (.5).562 (39.7).82 (46.0) 2.062 (52.4) 2.062 (52.4) 2.88 (55.6) Dia.82 (.6).937 (23.8).062 (27.0).88 (30.2). (33.3).562 (39.7).750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.82 (7.4) H losed.27 (5.5).296 (7.5).390 (9.9).434 (.0).434 (.0).596 (5.).596 (5.).858 (2.8).858 (2.8).07 (.).42 (.) able ntry.29 (5.6). (7.9).438 (.).53 (3.5).625 (5.9).750 (9.).938 (23.8).250 (3.8).375 (34.9).625 (4.3).875 (47.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. inish on M85049/2 is cadmium olive drab over electroless nickel (,000 hour salt spray). 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-0
S85049/38 Strain Relief Strain Reliefs lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/38 S W S = Self-Locking Use Dash for Non-Self-Locking Self-Locking Only Material and inish Designator = luminum, lack nodize (Non-Self-Locking Only) N = luminum, lectroless Nickel (Self-Locking Only) S = 300 Series Steel, Passivated (Self-Locking Only) W = luminum, 500 Hour admium Olive Drab Over lectroless Nickel able ntry Self-Locking Only H Note: Screw orientation shown is for non-self-locking configuration. Screws on self-locking configurations are on the same side/face of the clamp. 9 3 5 7 9 2 23 25 Ref. D H J lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia Self-Locking Only.858 (2.8).984 (25.0).57 (29.4).279 (.5).406 (35.7).56 (38.5).642 (4.7).768 (44.9).889 (48.0) TL I Self-Locking Only.9 (23.).9 (23.).0 (25.7).06 (26.9).6 (29.5).4 (35.8).5 (38.4).66 (42.2).76 (44.7) H.85 (2.6).90 (.9).0 (27.9).5 (29.2).30 (33.0).50 (38.).60 (40.6).70 (43.2).80 (45.7) able ntry Min.098 (2.5).53 (3.9).90 (4.8).260 (6.6).3 (7.2).5 (8.3).343 (8.7).38 (9.7).48 (0.6).234 (5.9).234 (5.9).3 (8.3).457 (.6).64 (5.6).634 (6.).698 (7.7).823 (.9).853 (2.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-
Strain Reliefs S85049/39 Strain Relief lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/39 S W S = Self-Locking Use Dash for Non-Self-Locking Material and inish Designator = luminum, lack nodize N = luminum, lectroless Nickel S = 300 Series Steel, Passivated W = luminum,,000 Hour admium Olive Drab Over lectroless Nickel Self Locking Only able ntry H 9 3 5 7 9 2 23 25 Ref. D H J lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia Self-Locking Only.858 (2.8).984 (25.0).57 (29.4).279 (.5).406 (35.7).56 (38.5).642 (4.7).768 (44.9).889 (48.0). (30.5). (30.5).40 (35.6).45 (.8).60 (40.6).70 (43.2).85 (47.0).95 (49.5) 2.0 (53.3) TL I.00 (25.4).0 (27.9).0 (27.9).25 (3.8).30 (33.0).35 (34.3).60 (40.6).75 (44.5).85 (47.0) H.85 (2.6).90 (.9).0 (27.9).5 (29.2).30 (33.0).50 (38.).60 (40.6).70 (43.2).80 (45.7) Min.098 (2.5).53 (3.9).90 (4.8).260 (6.6).3 (7.2).5 (8.3).343 (8.7).38 (9.7).48 (0.6) able ntry.234 (5.9).234 (5.9).3 (8.3).457 (.6).64 (5.6).634 (6.).698 (7.7).823 (.9).853 (2.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-2
S85049/4 and MS3057 Strain Reliefs Strain Reliefs MIL-DTL-505 MS V Thread (Mates to eneral Duty ndbell) M85049/4-3 Dash No. SUPRDD SPIITION MS3057-6 Dash No. D able ntry TL I Dash No. 3 4 6 8 0 2 6 40 onn. Ref.(s) 8S, 0S 0SL, 2S, 2 4S, 4 6S, 6 8,, 40 44 48 lass 2 /2 - UN 5/8 - UN 3/4 - UN 7/8 - UN - UN 3/6-8 UN 7/6-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN 3-6 UN able ntry. (7.9).438 (.).562 (4.3).625 (5.9).750 (9.).938 (23.8).250 (3.8).375 (34.9).625 (4.3).875 (47.6) 2.375 (60.3) D Ref..406 (0.3).406 (0.3).406 (0.3).406 (0.3).406 (0.3).406 (0.3).406 (0.3).469 (.9).53 (3.5).53 (3.5).594 (5.).656 (6.7) Dia ±.03 (0.8).688 (7.5).82 (.6).969 (.6).094 (27.8).88 (30.2).375 (34.9).656 (42.) 2.03 (5.6) 2.29 (56.4) 2.500 (63.5) 2.78 (70.6) 3. (83.3) ±.03 (0.8).82 (.6).875 (.2).062 (27.0).56 (29.4).250 (3.8).469 (37.3).688 (42.9) 2.03 (5.6) 2. (57.9) 2.688 (68.3) 2.938 (74.6) 3.500 (88.9) ±.03 (0.8).82 (.6).82 (.6).875 (.2).938 (23.8).938 (23.8).938 (23.8).03 (26.2).094 (27.8).56 (29.4).688 (42.9).750 (44.5).750 (44.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 4. inish on M85049/4 is cadmium olive drab over electroless nickel (,000 hour salt spray). 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-3
Strain Reliefs S85049/42 and MS3057D Strain Reliefs MIL-DTL-505 MS V Thread (Mates to eneral Duty ndbell) Dash No. M85049/42-0D W Material and inish N = luminum, lectroless Nickel S = 300 Series Steel, Passivate W = luminum,,000 Hour admium Olive Drab Over lectroless Nickel Thread Dash No. MS3057-0D able ntry H SUPRDD SPIITION Material and inish = luminum, admium Olive Drab over lectroless Nickel = luminum, admium Olive Drab N = luminum, lectroless Nickel D = 300 Series Steel, admium Plate lack S = 300 Series Steel, Passivate Stainless Steel lamp Saddle onfiguration Telescoping Screws Dash No. 4D 6D 8D 0D 2D 6D D D D D Thread lass 2 5/8 - UN 3/4 - UN 7/8 - UN - UN 3/6-8 UN 7/6-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN Dia.937 (23.8).03 (26.2).250 (3.8).250 (3.8).437 (.5).688 (42.9) 2.000 (50.8) 2.250 (57.2) 2.500 (63.5) 2.750 (69.9) TL I Dia ±.0 (.5). (.5). (.5). (.5). (.5). (33.3).406 (35.7).563 (39.7).625 (4.3).900 (48.3).900 (48.3) H ±.0 (.5).937 (23.8).25 (.6). (33.3). (33.3).53 (38.9).750 (44.5) 2.093 (53.2) 2.343 (59.5) 2.750 (69.9) 3.000 (76.2) able ntry. (7.9).437 (.).562 (4.3).625 (5.9).750 (9.).937 (23.8).250 (3.8).375 (34.9).625 (4.3).875 (47.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-4
S85049/43 Strain Relief Strain Reliefs lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 M85049/43-2 W Dash No. Material and inish Designator N = luminum, lectroless Nickel W = luminum,,000 Hour admium Olive Drab Over lectroless Nickel. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. able ntry Dash No. 3 8 0 2 4 6 8 40 44 48 6 lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN Dia.669 (7.0).67 (5.7).734 (8.6).858 (2.8).984 (25.0).2 (.2). (30.9).345 (34.2).468 (37.3).593 (40.5).969 (50.0) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) 3.29 (8.8).653 (42.0) TL I losed.60 (29.5).60 (29.5).4 (30.6).278 (.5).3 (33.5).426 (.2).544 (39.2).588 (40.3).6 (4.5).676 (42.6).80 (45.7).889 (48.0).933 (49.).934 (49.) 2.0 (55.9) 2.8 (58.).676 (42.6).772 (9.6).772 (9.6).803 (.4).866 (.0).9 (23.6).99 (25.2).0 (.2).72 (29.8).235 (3.4).297 (.9).543 (39.2).668 (42.4).793 (45.5).98 (48.7) 2. (54.2) 2.257 (57.3).4 (30.6) able ntry Min.25 (3.2).4 (5.2).25 (3.2).4 (5.2).87 (4.7).6 (7.3).29 (7.4).46 (0.6).35 (8.9).476 (2.).50 (2.7).58 (3.2).58 (4.8).644 (6.4).706 (7.9).750 (9.).875 (.2).938 (23.8).938 (23.8).88 (30.2). (33.3).706 (7.9).625 (5.9).706 (7.9).83 (2.).956 (.3).08 (27.5).87 (30.).250 (3.8).375 (34.9).500 (38.).750 (44.5).875 (47.6).08 (27.5) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-5
Strain Reliefs S85049/45 Strain Relief lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/45 W 0 Nut inish = lack nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Dash No. able ntry Thermoplastic ody luminum Nut Dash No. 8 0 2 4 6 8 Ref. 8/9 0/ 2/3 4/5 6/7 8/9 /2 /23 /25 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.578 (4.7).703 (7.9).8 (2.0).953 (.2).078 (27.4).3 (30.6).3 (33.7).453 (.9).578 (40.) TL I.344 (34.).344 (34.).344 (34.).344 (34.).344 (34.).344 (34.).4 (.).4 (.).4 (.).4 (0.7).4 (0.7).4 (0.7).4 (0.7).4 (0.7).4 (0.7).4 (0.7).4 (0.7).344 (8.7) Min.094 (2.4).4 (3.6).72 (4.4).3 (5.2).234 (5.9).265 (6.7).297 (7.5).3 (8.3).359 (9.) able ntry.3 (5.2).3 (8.2).4 (0.7).500 (2.7).562 (4.3).625 (5.9).703 (7.9).765 (9.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-6
S85049/46 Strain Relief Strain Reliefs lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/46 W 0 Nut inish = lack nodize W =,000 Hour admium Olive Drab Over lectroless Nickel Dash No. Thermoplastic ody luminum Nut. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. able ntry Dash No. 8 0 2 4 6 8 Ref. 8/9 0/ 2/3 4/5 6/7 8/9 /2 /23 /25 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN TL I Dia.578 (4.7).656 (6.7).703 (7.9).688 (7.5).8 (2.0).750 (9.).953 (.2).859 (2.8).078 (27.4).937 (23.8).3 (30.6).000 (25.4).3 (33.7).062 (27.0).453 (.9).4 (29.0).578 (40.).3 (30.6).05 (25.8).062 (27.0).25 (.6).3 (33.7).392 (35.4).453 (.9).609 (40.9).656 (42.).79 (43.7) Min.094 (2.4).4 (3.6).72 (4.4).3 (5.2).234 (5.9).265 (6.7).297 (7.5).3 (8.3).359 (9.) able ntry.3 (5.2).3 (8.2).4 (0.7).500 (2.7).562 (4.3).625 (5.9).703 (7.9).765 (9.4) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-7
Strain Reliefs S85049/47 and MS27507 Strain Reliefs lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & S = Self-Locking Omit for Non-Self-Locking M85049/47 S W 0 H309 MS27507-0 (Non-Self-Locking) Material and inish Designator = luminum, 500 Hour admium Olive Drab Over lectroless Nickel = luminum, lectroless Nickel Dash No. Material and inish Designator N = luminum, lectroless Nickel S = 300 Series Steel, Passivated W = luminum,,000 Hour admium Olive Drab Over lectroless Nickel SUPRDD SP. Dash No. Self-Locking Only able ntry H Dash No. 8 0 2 4 6 8 Ref. 8/9 0/ 2/3 4/5 6/7 8/9 /2 /23 /25 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia.86 (2.8).98 (.9).6 (29.5). (.5).4 (35.8).52 (38.6).64 (4.7).77 (45.0).89 (48.0) TL I.38 (35.).00 (25.4).38 (35.).0 (27.9).46 (37.).0 (27.9).63 (4.4).25 (3.8).80 (45.7).30 (33.0).82 (46.2).35 (34.3).90 (48.3).60 (40.6) 2.04 (5.8).75 (44.5) 2.5 (54.6).85 (47.0) H.85 (2.6).90 (.9).0 (27.9).5 (29.2).30 (33.0).50 (38.).60 (40.6).70 (43.2).80 (45.7) Min.098 (2.5).53 (3.9).90 (4.8).260 (6.6).3 (7.2).5 (8.3).343 (8.7).38 (9.7).48 (0.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. able ntry.234 (5.9).234 (5.9).3 (8.3).457 (.6).64 (5.6).634 (6.).698 (7.7).823 (.9).853 (2.7) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-8
S85049/49 and MS27506 Strain Reliefs Strain Reliefs lenair onnector Designator MIL-DTL-38999 Series I & II, 40M38277, PN 6433-, PTT 64, PTT 66, N934 Series H308 & H309 M85049/49-2 S 0 W S = Self-Locking Use Dash for Non-Self-Locking Material and inish Designator = luminum, lack nodize (Non-Self-Locking Only) N = luminum, lectroless Nickel S = 300 Series Steel, Passivated (Self-Locking Only) W = luminum,,000 Hr. admium Olive Drab Over lectroless Nickel Self-Locking Only Self-Locking Only H able ntry Note: Screw orientation shown is for non-self-locking configuration. Screws on self-locking configurations are on the same side/face of the clamp. TL I Dash No. 8 0 2 4 6 8 Ref. 8/9 0/ 2/3 4/5 6/7 8/9 /2 /23 /25 lass 2.438 - UN.562 - UN.688 - UN.83 - UN.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN Dia Self-Locking Only.86 (2.8).98 (.9).6 (29.5). (.5).4 (35.8).52 (38.6).64 (4.7).77 (45.0).89 (48.0) Self-Locking Only.9 (23.).9 (23.).0 (25.7).06 (26.9).6 (29.5).4 (35.8).5 (38.4).66 (42.2).76 (44.7) H.85 (2.6).90 (.9).0 (27.9).5 (29.2).30 (33.0).50 (38.).60 (40.6).70 (43.2).80 (45.7) Min.098 (2.5).53 (3.9).90 (4.8).260 (6.6).3 (7.2).5 (8.3).343 (8.7).38 (9.7).48 (0.6) able ntry.234 (5.9).234 (5.9).3 (8.3).457 (.6).634 (6.).64 (5.6).698 (7.7).823 (.9).853 (2.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-9
Strain Reliefs S85049/5, MS348, and M83723/5 Strain Reliefs lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 S = Self-Locking = Non-Self-Locking Dash No. M85049/5 S 0 W MS348-0 (Non-Self-Locking Only) Dash No. Material and inish Designator = luminum, lack nodize N = luminum, lectroless Nickel W = luminum,,000 Hour admium Olive Drab Over lectroless Nickel SUPRDD SP. Material and inish Designator = lum.,,000 Hour admium Olive Drab Over lectroless Nickel = luminum, admium Olive Drab = luminum, lack nodize N = luminum, lectroless Nickel M83723/5-0 (Non-Self-Locking Only) Dash No. SUPRDD SP. inish Designator = Non-onductive, lack nodize R = onductive, lectroless Nickel Self Locking Only Self Locking Only able ntry H 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-
S85049/5, MS348, and M83723/5 Strain Reliefs Strain Reliefs Dash No. 3* + 8 0 2 4 6 8 + + + 40 + 44 + 48 + 6* + Dia lass 2 Self-Locking.562 - UN n/a.500 - UN.885 (.5).625 - UN.00 (25.7).750 - UN.35 (.8).875 - UN.260 (.0).000 - UN.385 (35.2).062-8 UN.50 (38.4).88-8 UN.635 (4.5).33-8 UN.760 (44.7).438-8 UN.885 (47.9).750-8 UNS 2.35 (54.2) 2.000-8 UNS 2.395 (60.8) 2.250-6 UN 2.635 (66.9) 2.500-6 UN 2.885 (73.3) 2.750-6 UN 3.35 (79.6) 3.000-6 UN 3.385 (86.0).500-8 UN n/a * Not vailable in Self Locking + Not vailable under M83723/5 Self-Locking n/a.257 (3.9).339 (34.0).5 (38.9).592 (40.4).74 (44.2).853 (47.).978 (50.2) 2.08 (53.5) 2.8 (56.6) 2.5 (64.2) 2.59 (65.8) 2.76 (69.0) 2.84 (72.2) 3.09 (78.5) 3. (8.5) n/a TL I ±.062 (.6).777 (9.7).746 (8.9).805 (.4).867 (.0).930 (23.6).994 (25.2).7 (29.7).234 (3.2).296 (.9).358 (34.5).572 (39.9).797 (45.6).9 (48.8) 2.047 (52.0) 2.296 (58.3) 2.42 (6.5).388 (35.3) H ±.0 (.5).7 (8.6).7 (8.6).82 (.6).968 (.6).026 (26.).299 (33.0).43 (.3).537 (39.0).633 (4.5).755 (44.6) 2.000 (50.8) 2.6 (60.) 2.476 (62.9) 2.546 (64.7) 2.840 (72.) 3.3 (84.4).755 (44.6) Min.25 (3.2).25 (3.2).87 (4.7).29 (7.4).35 (8.9).50 (2.7).58 (3.2).58 (4.8).644 (6.4).706 (7.9).750 (9.).875 (.2).938 (23.8).938 (23.8).88 (30.2). (33.3).706 (7.9) able ntry.4 (5.2).4 (5.2).6 (7.3).46 (0.6).476 (2.).626 (5.9).706 (7.9).83 (2.).956 (.3).08 (27.5).87 (30.).250 (3.8).375 (34.9).500 (38.).750 (44.5).875 (47.6).08 (27.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-2
Strain Reliefs S85049/52, MS347, and M83723/5S Strain Reliefs lenair onnector Designator MIL-DTL-505 Series 3400, MIL-DTL-26482 Series 2, S8703 Series 3, MIL-DTL-83723 Series I & III, 40M39569, D 56-3, N 2997, N 46, S 0, S, LN 29504, N934 Series H302, PN 64-, PN 64-2, PTT 602 S = Self-Locking = Non-Self-Locking Dash No. M85049/52 S 0 W MS347-0 (Non-Self-Locking Only) Dash No. Material and inish Designator = luminum, lack nodize N = luminum, lectroless Nickel W = luminum,,000 Hour admium Olive Drab Over lectroless Nickel SUPRDD SP. Material and inish Designator = luminum,,000 Hour ad. Olive Drab Over lectroless Nickel = luminum, admium Olive Drab = luminum, lack nodize N = luminum, lectroless Nickel M83723/5S-0 (Non-Self-Locking Only) Dash No. SUPRDD SP. inish Designator = Non-onductive, lack nodize R = onductive, lectroless Nickel Self Locking Only able ntry Dia Self Locking Only 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-
S85049/52, MS347, and M83723/5S Strain Reliefs Strain Reliefs Dash No. 3* + 8 0 2 4 6 8 + + + 40 + 44 + 48 + 6* + lass 2.562 - UN.500 - UN.625 - UN.750 - UN.875 - UN.000 - UN.062-8 UN.88-8 UN.33-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN Dia Self-Locking n/a.885 (.5).00 (25.7).35 (.8).260 (.0).385 (35.2).50 (38.4).635 (4.5).760 (44.7).885 (47.9) 2.35 (54.2) 2.395 (60.8) 2.635 (66.9) 2.885 (73.3) 3.35 (79.6) 3.385 (86.0) n/a * Not vailable in Self Locking + Not vailable under M83723/5S TL I Self-Locking n/a.73 (8.5).85 (2.6).98 (.9).98 (.9).0 (27.9).35 (34.3).48 (37.6).60 (40.6).73 (43.9).88 (47.8) 2.3 (54.) 2.44 (62.0) 2.63 (66.8) 3.00 (76.2) 3.40 (86.4) n/a ±.0 (.5).7 (8.6).7 (8.6).82 (.6).968 (.6).026 (26.).299 (33.0).43 (.3).537 (39.0).633 (4.5).755 (44.6) 2.000 (50.8) 2.6 (60.) 2.476 (62.9) 2.546 (64.7) 2.840 (72.) 3.3 (84.4).755 (44.6) able ntry Min.25 (3.2).4 (5.2).25 (3.2).4 (5.2).87 (4.7).6 (7.3).29 (7.4).46 (0.6).35 (8.9).476 (2.).50 (2.7).58 (3.2).58 (4.8).644 (6.4).706 (7.9).750 (9.).875 (.2).938 (23.8).938 (23.8).88 (30.2). (33.3).706 (7.9).626 (5.9).706 (7.9).83 (2.).956 (.3).08 (27.5).87 (30.).250 (3.8).375 (34.9).500 (38.).750 (44.5).875 (47.6).08 (27.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. able ntry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-23
Strain Reliefs S85049/9 and M85049/92 omposite Strain Reliefs Self-Locking lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 M85049/9- T M85049/9 = Straight M85049/92 = 90 Material and inish Designator (Note 4) J = omposite (onductive), admium Olive Drab Over lectroless Nickel M = omposite (onductive), lectroless Nickel T = omposite (Non-onductive) Without Plating Typ. J Dia Typ. H Typ. Typ. (See Note 3) K 09 3 5 7 9 2 23 25 lass 2 M2 X - 6H M5 X - 6H M8 X - 6H M X - 6H M25 X - 6H M X - 6H M3 X - 6H M34 X - 6H M37 X - 6H Dia.858 (2.8).984 (25.0).57 (29.4).0 (.5).406 (35.7).56 (38.5).642 (4.7).768 (44.9).890 (48.0).840 (2.3).960 (.4).00 (27.9).00 (27.9).230 (3.2).40 (35.8).50 (38.4).660 (42.2).760 (44.7) TL I.98 (.9).05 (26.7). (30.5).30 (33.0).42 (.).52 (38.6).64 (4.7).77 (45.0).89 (48.0) H +.03 Dia.29 (5.6).264 (6.7).344 (8.7).460 (.7).545 (3.8).65 (5.6).698 (7.7).700 (7.8).850 (2.6) J.06 (26.9).0 (27.9).8 (30.0).30 (33.0).38 (35.).45 (.8).54 (39.).62 (4.).69 (42.9) K ±.062 (.6).875 (.2).937 (23.8).03 (26.2).25 (.6). (33.3).375 (34.9).500 (38.).625 (4.3).750 (44.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. lamp ntry is measured with Saddle bars closed and seated on lamp ars. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 62-
Dummy Stowage Receptacles Dummy Stowage Receptacles choice of dummy stowage receptacles is offered for most circular bayonet coupled and threaded coupled connectors. lenair s Military Superceeding ommercial Page Specification Part Number atalog P/N onnector Interface Number MS305 S305 MIL-DTL-505 65-2 MS35 650DS00 MIL-DTL-26482 65-3 MS27296 M83723/6-650S00 MIL-DTL-26500 Threaded and MIL-DTL-83723 Series III, Threaded 65- MS27297 M83723/6-2 650S002 MIL-DTL-26500 ayonet and MIL-DTL-83723 Series III, ayonet 65- M840/7 650S00 MIL--840 65-4 M38999/9 650S00 MIL-DTL-38999 Series I 65-5 M38999/0 650S002 MIL-DTL-38999 Series II 65-6 D38999/ 650HS00 MIL-DTL-38999 Series III 65-7 D38999/50 650HS007 MIL-DTL-38999 Series IV 65-8 M85/9 650JS002 MIL--85 Series 2 65-9 M85/30 650JS00 MIL--85 Series 65-0 M83723/45 MS35 650DS00 MIL-DTL-26482 65-3* M83723/6-650S00 MIL-DTL-26500 Threaded and MIL-DTL-83723 Series III, Threaded 65- M83723/6-2 650S002 MIL-DTL-26500 ayonet and MIL-DTL-83723 Series III, ayonet 65- * Page Number of Superceeding Part Number 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-65 N Dummies.p65 3//09, :33 M
Dummy Stowage Receptacles MS305 Dummy Stowage Receptacle Mating onnector MIL-DTL-505 Dash No. MS305-6 H K Dia. J Thread TL I 8S 0S 2S 2 4S 4 6S 6 8 40 44 48 ±.005 (.).594 (5.).79 (8.3).82 (.6).82 (.6).906 (23.0).906 (23.0).969 (.6).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).562 (39.7).750 (44.5).938 (49.2) 2.88 (55.6) 2.375 (60.3) 2.625 (66.7).906 (23.0).03 (26.2).25 (.6).25 (.6).29 (3.0).29 (3.0). (33.3). (33.3).406 (35.7).53 (38.9).656 (42.).78 (45.2) 2.03 (5.6) 2. (57.9) 2.53 (64.3) 2.78 (70.6) 3.03 (77.0) 3. (83.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).57 (4.0).57 (4.0).83 (4.6).83 (4.6).83 (4.6).83 (4.6).83 (4.6) H.593 (5.).593 (5.).593 (5.).78 (9.8).593 (5.).78 (9.8).593 (5.).78 (9.8).78 (9.8).78 (9.8).78 (9.8).843 (2.4).843 (2.4).906 (23.0).906 (23.0).906 (23.0).906 (23.0).906 (23.0) J Thread lass 2 /2 - UN 5/8 - UN 3/4 - UN 3/4 - UN 7/8 - UN 7/8 - UN - UN - UN /8-8 UN /4-8 UN 3/8-8 UN /2-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN 2 3/4-6 UN 3-6 UN K.56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).3 (5.2).3 (5.2).3 (5.2).3 (5.2).3 (5.2).359 (9.).359 (9.).359 (9.).359 (9.).359 (9.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-2
Dummy Stowage Receptacles MS305 Dummy Stowage Receptacle Mating onnector MIL-DTL-505 Dash No. MS305-6 H K Dia. J Thread TL I 8S 0S 2S 2 4S 4 6S 6 8 40 44 48 ±.005 (.).594 (5.).79 (8.3).82 (.6).82 (.6).906 (23.0).906 (23.0).969 (.6).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).562 (39.7).750 (44.5).938 (49.2) 2.88 (55.6) 2.375 (60.3) 2.625 (66.7).906 (23.0).03 (26.2).25 (.6).25 (.6).29 (3.0).29 (3.0). (33.3). (33.3).406 (35.7).53 (38.9).656 (42.).78 (45.2) 2.03 (5.6) 2. (57.9) 2.53 (64.3) 2.78 (70.6) 3.03 (77.0) 3. (83.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).57 (4.0).57 (4.0).83 (4.6).83 (4.6).83 (4.6).83 (4.6).83 (4.6) H.593 (5.).593 (5.).593 (5.).78 (9.8).593 (5.).78 (9.8).593 (5.).78 (9.8).78 (9.8).78 (9.8).78 (9.8).843 (2.4).843 (2.4).906 (23.0).906 (23.0).906 (23.0).906 (23.0).906 (23.0) J Thread lass 2 /2 - UN 5/8 - UN 3/4 - UN 3/4 - UN 7/8 - UN 7/8 - UN - UN - UN /8-8 UN /4-8 UN 3/8-8 UN /2-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN 2 3/4-6 UN 3-6 UN K.56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).56 (4.0).3 (5.2).3 (5.2).3 (5.2).3 (5.2).3 (5.2).359 (9.).359 (9.).359 (9.).359 (9.).359 (9.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-2 65 N Dummies.p65 2 /2/07, :27 M
Dummy Stowage Receptacles M840/7 Dummy Stowage Receptacle Mating onnector MIL--840 Designator M840/7 Key Positions (, 2, 3, 4, 5 or 6).898 /.878 (.8 /.3).30 /.00 (3.3 / 2.5) D Dia 4 Holes Designator D H J Ref. 3 5 7 9 23 25 29 33 Thread 0.750-0.P-0.2L-DS 0.875-0.P-0.2L-DS.062-0.P-0.2L-DS.25-0.P-0.2L-DS.-0.P-0.2L-DS.500-0.P-0.2L-DS.625-0.P-0.2L-DS.82-0.P-0.2L-DS 2.000-0.P-0.2L-DS TL I Dim.750 (9.).843 (2.4).968 (.6).05 (25.8).40 (29.0). (.5).392 (35.4).568 (39.8).734 (44.0).043 (26.5).58 (29.4).278 (.5).403 (35.6).5 (38.8).738 (44.).838 (46.7) 2.58 (54.8) 2.348 (59.6) D.30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).57 (4.0).57 (4.0).83 (4.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. inish is cadmium olive drab over electroless nickel (500 hour salt spray). 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-4
M38999/9 Dummy Stowage Receptacle Dummy Stowage Receptacles Mating onnector MIL-DTL-38999 Series I M38999/9- inish = admium Olive Drab over lectroless Nickel K J H 9 3 5 7 9 2 23 25.572 (4.5).70 (7.8).85 (2.6).976 (.8).0 (.0).8 (30.7).333 (33.9).458 (37.0).583 (40.2) Dim.79 (8.3).82 (.6).906 (23.0).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.) TL I.958 (.3).05 (26.7).45 (29.).239 (3.5).3 (33.8).458 (37.0).582 (40.2).708 (43.4).8 (46.5) H Nom. (3.3). (3.3). (3.3). (3.3). (3.3). (3.3). (3.3).47 (3.7).47 (3.7) J.085 (2.2).085 (2.2).085 (2.2).085 (2.2).085 (2.2).085 (2.2).5 (2.9).5 (2.9).5 (2.9) K ±.00 (.3).727 (8.5).727 (8.5).727 (8.5).727 (8.5).727 (8.5).727 (8.5).697 (7.7).697 (7.7).697 (7.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-5
Dummy Stowage Receptacles M38999/0 Dummy Stowage Receptacle Mating onnector MIL-DTL-38999 Series II M38999/0-2 inish = admium Olive Drab over lectroless Nickel K J H 8 0 2 4 6 8.474 (2.0).59 (5.0).75 (9.).876 (.3).00 (25.4).26 (.6).25 (3.8).376 (35.0).50 (38.).594 (5.).79 (8.3).82 (.6).906 (23.0).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9) TL I.8 (2.0).954 (.2).047 (26.6).4 (29.0).234 (3.3).3 (33.7).453 (.9).578 (40.).703 (43.3) H Nom. (3.0). (3.0). (3.0). (3.0). (3.0). (3.0). (3.0). (3.0).47 (3.7) J.069 (.8).069 (.8).069 (.8).069 (.8).069 (.8).069 (.8).069 (.8).069 (.8).069 (.8) K ±.00 (.3).45 (.5).45 (.5).45 (.5).45 (.5).45 (.5).45 (.5).45 (.5).45 (.5).45 (.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-6
D38999/ Dummy Stowage Receptacle Dummy Stowage Receptacles Mating onnector MIL-DTL-38999 Series III ode D38999/ W lass Per Spec. (inish is admium Olive Drab Over lectroless Nickel) Sq. Typ. D Typ. Dia ode D H J Ref. 9 3 5 7 9 2 23 25 Thread.625-.P-3LTS.750-.P-3LTS.875-.P-3LTS.000-.P-3LTS.87-.P-3LTS.250-.P-3LTS.375-.P-3LTS.500-.P-3LTS.625-.P-3LTS TL I -0.0 +.0 (0.5).823 (.9).823 (.9).823 (.9).823 (.9).823 (.9).823 (.9).79 (.).79 (.).79 (.) ±.02 (0.3).098 (2.5).098 (2.5).098 (2.5).098 (2.5).098 (2.5).098 (2.5).26 (3.2).26 (3.2).26 (3.2) D.594 (5.09).79 (8.26).82 (.62).906 (23.0).969 (.6).062 (26.97).56 (29.).250 (3.75).375 (34.93) ode Ref. 9 3 D 5 7 9 2 H 23 J 25 TL II.79 (8.26).82 (.62).906 (23.0).969 (.6).062 (26.97).56 (29.).250 (3.75).375 (34.93).500 (38.0) ±.02 (0.3).937 (23.8).03 (26.2).26 (.6).2 (3.0).3 (33.3).437 (.5).563 (39.7).689 (42.9).8 (46.0) Dia ±.008 (0.2). (3.25). (3.25). (3.25). (3.25). (3.25). (3.25). (3.25).54 (3.9).54 (3.9). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-7
Dummy Stowage Receptacles D38999/50 Dummy Stowage Receptacle Mating onnector MIL-DTL-38999 Series IV ode D38999/50 W lass Per Spec. (inish is admium Olive Drab Over lectroless Nickel) Sq..89/.756 (.8/9.2) D Sq. ode D H J Ref. 3 5 7 9 2 23 25 ±.043 (±.0).030 (26.5). (.55).29 (30.95).33 (33.35).439 (.55).56 (39.65).687 (42.85).83 (46.05) TL I S.82 (.62).906 (23.02).969 (.62).062 (26.98).56 (29.).250 (3.76).375 (34.92).500 (38.0) + 0 (0.00) -.05 (-0.39).793 (.5).99 (23.35).044 (26.52).70 (29.72).294 (.87).49 (.05).544 (39.).669 (42.40) D ±.00 (±.25).093 (2.35).093 (2.35).093 (2.35).093 (2.35).093 (2.35). (3.5). (3.5). (3.5) Dia ±.008 (±0.2).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).42 (3.6).42 (3.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-8
M85/9 Dummy Stowage Receptacle Dummy Stowage Receptacles Mating onnector MIL--85 Series 2 M85/9-4- inish: = admium Olive Drab 2 = Dull hromium over Nickel Inactive for New Design J K O-Ring H 08 0 4 6 8 Dia ±.003 (.).550 (4.0).675 (7.).925 (23.5).05 (26.7).75 (29.8) Sq. ±.008 (.2).82 (.6).937 (23.8).25 (.6).250 (3.8).343 (34.) TL I Sq. ±.005 (.).594 (5.).79 (8.3).906 (23.0).969 (.6).062 (27.0) H ±.005 (.).2 (3.).2 (3.).2 (3.).2 (3.).2 (3.) J ±.00 (.3).645 (6.4).645 (6.4).645 (6.4).645 (6.4).645 (6.4) K ±.005 (.).070 (.8).070 (.8).070 (.8).070 (.8).070 (.8). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-9
Dummy Stowage Receptacles M85/30 Dummy Stowage Receptacle Mating onnector MIL--85 Series M85/30-4- inish: = admium Olive Drab 2 = Dull hromium over Nickel Inactive for New Design J K O-Ring H 08 0 4 6 8 Dia ±.003 (.).550 (4.0).675 (7.).925 (23.5).05 (26.7).75 (29.8).300 (33.0).425 (.2).550 (39.4) Sq. ±.008 (.2).82 (.6).937 (23.8).25 (.6).250 (3.8).343 (34.).467 (37.3).562 (39.7).703 (43.3) TL I Sq. ±.005 (.).594 (5.).79 (8.3).906 (23.0).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9) H ±.005 (.).2 (3.).2 (3.).2 (3.).2 (3.).2 (3.).2 (3.).2 (3.).48 (3.8) J ±.00 (.3).645 (6.4).645 (6.4).645 (6.4).645 (6.4).645 (6.4).645 (6.4).645 (6.4).645 (6.4) K ±.005 (.).070 (.8).070 (.8).070 (.8).070 (.8).070 (.8).070 (.8).070 (.8).070 (.8). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-0
M83723/6, MS27296 and MS27297 Dummy Stowage Receptacles Dummy Stowage Receptacles Mating onnector MIL-DTL-26500 M83723/6-8 M83723/6- Threaded oupling M83723/6-2 ayonet oupling inish = lack nodize R = lectroless Nickel W = admium Olive Drab Over lectroless Nickel MS27296-5 MS27296 Threaded oupling MS27297 ayonet oupling M83723/6- MS27296 Superceded Part Number Dash No. M83723/6-2 MS27297.78 (8.2).062 (.6) O-Ring.78 (8.2).062 (.6) O-Ring Dia H Dia J Thread M83723 8 0 2 4 6 8 MS27296 MS27297 Dash No. 7 2 3 4 5 8 6 9 Dia.56 (4.2).696 (7.7).875 (.2).935 (23.7).062 (27.0).87 (30.). (33.3).437 (.5).562 (39.7) TL I Dim.82 (.6).937 (23.8).03 (26.2).25 (.6).250 (3.8).343 (34.).437 (.5).562 (39.7).703 (43.3) Dim.594 (5.).79 (8.3).82 (.6).906 (23.0).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9) H Dia.25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).54 (3.9) J Thread 9/6 - UN /6 - UN 7/8 - UN 5/6 - UN /6-8 UN 3/6-8 UN 5/6-8 UN 7/6-8 UN 9/6-8 UN. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. MS27296 and MS27297 finish is black anodize 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 65-65 N Dummies.p65 4/2/09, 5:38 PM
Shipboard Interconnect Requirements? T lenair is MIL--840 Qualified he standard connector series for shipboard use, MIL--840 offers high-density insert arrangement and high-shock performance. lenair's qualified product line is now fully tooled and many popular part numbers are in stock, ready for same-day shipment. The MIL--840 features RI/MI shielding, scoop-proof shells and corrosion-resistant materials and finishes. In addition to all the connector types and styles, lenair makes all the backshell accessory slash numbers as well. The addition of the MIL--840 connector product line is part of lenair's total commitment to meeting all your shipboard interconnect requirements. So when you think M840, think lenair from connectors to accessories. Please call the factory, or see our website, for order information. 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany N o r d i c rance S p a i n Italy
Protective overs Protective overs wide selection of protective covers are offered for almost all bayonet or threaded coupled circular connectors. lenair's proprietary versions (as shown in lenair s ircular onnector ccessories catalog) offer a broad choice of attachments not provided on the Military Standard versions. MI/RI protective covers are offered for most bayonet coupled receptacle connectors. lenair s ircular onnector ccessories catalog is available upon request or visit our web site at. lenair s Military Superceeding ommercial Page Specification Part Number atalog P/N Description onnector Interface Number MS380 660-008 Protective over, Plug MIL-DTL-26482 66-2 MS38 660-009 Protective over, Recept. MIL-DTL-26482 66-2 MS7349 660-007 Protective over, Recept. MIL-DTL-992 66-3 MS7350 660-006 Protective over, Plug MIL-DTL-992 66-3 MS047 MS27502 660-04 Protective over, Recept. MIL-DTL-38999 Series I 66-5* MS048 MS2750 660-03 Protective over, Plug MIL-DTL-38999 Series I 66-5* MS25042 660-004 Protective over, Plug MIL-DTL-505 66-4 MS25043 660-005 Protective over, Recept. MIL-DTL-505 66-4 MS27292 M83723/59-660-02 Protective over, Plug MIL-DTL-83723 Series III Thd 66-0 MS27293 M83723/59-2 660-09 Protective over, Plug MIL-DTL-83723 Series III ay. 66- MS27294 M83723/60-660-0 Protective over, Recept. MIL-DTL-83723 Series III Thd 66-0 MS27295 M83723/60-2 660-0 Protective over, Recept. MIL-DTL-83723 Series III ay. 66- MS27352 MS2750 660-04 Protective over, Plug MIL-DTL-38999 Series II 66-6* MS27353 MS275 660-05 Protective over, Recept. MIL-DTL-38999 Series II 66-6* MS2750 660-02 Protective over, Plug MIL-DTL-38999 Series I 66-5 MS27502 660-03 Protective over, Recept. MIL-DTL-38999 Series I 66-5 MS2750 660-04 Protective over, Plug MIL-DTL-38999 Series II 66-6 MS275 660-05 Protective over, Recept. MIL-DTL-38999 Series II 66-6 M840/3 660-00 Protective over, Recept. MIL--840 66-7 M840/5 660-0 Protective over, Plug MIL--840 66-7 D38999/ 660-023 Protective over, Plug MIL-DTL-38999 Series III 66-8 D38999/33 660-0 Protective over, Recept. MIL-DTL-38999 Series III 66-8 M85/7 660-07 Protective over, Plug MIL--85 Series 2 66-9 M85/8 660-08 Protective over, Recept. MIL--85 Series and 2 66-9 M85/29 660-06 Protective over, Plug MIL--85 Series 66-9 M83723/44 MS38 660-009 Protective over, Recept. MIL-DTL-26482 66-2* M83723/46 MS380 660-008 Protective over, Plug MIL-DTL-26482 66-2* M83723/59-660-02 Protective over, Plug MIL-DTL-83723 Series III Thd 66-0 M83723/59-2 660-09 Protective over, Plug MIL-DTL-83723 Series III ay. 66- M83723/60-660-0 Protective over, Recept. MIL-DTL-83723 Series III Thd 66-0 M83723/60-2 660-0 Protective over, Recept. MIL-DTL-83723 Series III ay. 66- MS90563 660-007 Protective over, Recept. MIL--992 66-2 MS90564 660-006 Protective over, Plug MIL--992 66-2 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-
Protective overs MS380 and MS38 Protective overs MS380-2 L MIL-DTL-26482 L MS38 Optional Ring ttachment MS380 = Plug over MS38 = Receptacle over ttachment Option = hain N = hain with Ring (MS38 Only) R = Wire Rope MS380-2 MS380 = Plug over MS38 = Receptacle over Length L = hain or Rope Length of 5 inches (27.0 mm) Omit for Standard (See K in Table) inish = nodize Prior Revision D vailable Note: inish is admium Olive Drab ttachment Option (Omit or No ttachment) = hain N = hain with Ring (MS38 Only) J asket.67 (4.2) Dia H asket.67 (4.2) Dia K K MS380 Plug over MS38 Receptacle over TL I 8 0 2 4 6 8.562 (4.3).562 (4.3).562 (4.3).562 (4.3).562 (4.3).562 (4.3).625 (5.9).625 (5.9).658 (6.7) Dia.79 (8.3).844 (2.4).000 (25.4).25 (.6).250 (3.8).375 (34.9).500 (38.).625 (4.3).750 (44.5) H Dia.734 (8.6).859 (2.8).000 (25.4).25 (.6).250 (3.8).375 (34.9).500 (38.).625 (4.3).750 (44.5) J.562 (4.3).562 (4.3).562 (4.3).562 (4.3).562 (4.3).562 (4.3).562 (4.3).562 (4.3).602 (5.3) K Standard Length 3.00 (76.2) 3.00 (76.2) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 4.00 (0.6) 4.00 (0.6) 4.00 (0.6) L Min.578 (4.7).703 (7.9).89 (.6).06 (25.8).4 (29.0).266 (.2).39 (35.3).56 (38.5).64 (4.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-2
MS7349 and MS7350 Protective overs Protective overs MIL--992 Thread L MS7349 ttachment Type H MS7349 = Receptacle over MS7350 = Plug over inish = onductive N = Non-onductive asket ttachment (Type ) M Dia MS7349.500 (38.) ttachment Type (MS7349 Only) Dash No. ttachment M Dia MS7349 Receptacle over J Thread MS7350 Plug over J Dash No. 2 4 6 8 40 44 Thread.8750-0.P-0.2L-DS.0000-0.P-0.2L-DS.250-0.P-0.2L-DS.2500-0.P-0.2L-DS.3750-0.P-0.2L-DS.5000-0.P-0.2L-DS.7500-0.P-0.2L-DS 2.0000-0.P-0.2L-DS 2.2500-0.P-0.2L-DS 2.5000-0.P-0.2L-DS 2.7500-0.P-0.2L-DS 3.0000-0.P-0.2L-DS.094 (27.8).29 (3.0).344 (34.).469 (37.3).562 (39.7).688 (42.9).938 (49.2) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) 3.29 (8.8) TL I H.765 (9.4).765 (9.4).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9).980 (.9) J hain Length 5.00 (27.0) 5.00 (27.0) 5.00 (27.0) 5.00 (27.0) 5.00 (27.0) 6.00 (52.4) 6.00 (52.4) 6.00 (52.4) 6.00 (52.4) 6.00 (52.4) 6.00 (52.4) 6.00 (52.4) L Min..06 (25.8).4 (29.0).266 (.2).39 (35.3).56 (38.5).64 (4.7).89 (48.0) 2.4 (54.4) 2.39 (60.7) 2.64 (67.) 2.89 (73.4) 3.4 (79.8) M Dia Min..50 (3.8).50 (3.8).50 (3.8).77 (4.5).77 (4.5).77 (4.5).77 (4.5).77 (4.5).99 (5.).99 (5.).99 (5.).99 (5.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-3
Protective overs MS25042 and MS25043 Protective overs MIL-DTL-505 MS25042-D MS25042 = Plug over MS25043 = Receptacle over inish = lack nodize MS25042-D MS25042 = Plug over MS25043 = Receptacle over Prior Revision vailable inish is admium Olive Drab ttachment L Dia Thread J asket ttachment M Dia H K K Thread MS25042 Plug over MS25043 Receptacle over 8D 0D 2D 4D 6D 8D D D D D D D 40D 44D 48D Thread /2 - UN 5/8 - UN 3/4 - UN 7/8 - UN - UN /8-8 UN /4-8 UN 3/8-8 UN /2-8 UN 3/4-8 UNS 2-8 UNS 2 /4-6 UN 2 /2-6 UN 2 3/4-6 UN 3-6 UN Dia.562 (4.3).687 (7.4).82 (.6).937 (23.8).062 (27.0).87 (30.). (33.3).437 (.5).562 (39.7).82 (46.0) 2.062 (52.4) 2. (58.7) 2.562 (65.) 2.82 (7.4) 3.062 (77.8).656 (6.7).656 (6.7).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4).844 (2.4) TL I H.688 (7.5).85 (.7).000 (25.4).25 (.6).88 (30.2).344 (34.).469 (37.3).594 (40.5).79 (43.7).969 (50.0) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) 3.88 (8.0) J.469 (.9).469 (.9).469 (.9).469 (.9).469 (.9).469 (.9).469 (.9).469 (.9).469 (.9).53 (3.5).53 (3.5).53 (3.5).53 (3.5).53 (3.5).53 (3.5) K ttachment Length 4.00 (0.6) 4.00 (0.6) 4.50 (4.3) 4.50 (4.3) 4.50 (4.3) 4.50 (4.3) 5.00 (27.0) 5.00 (27.0) 5.50 (39.7) 7.75 (96.9) 7.75 (96.9) 7.75 (96.9) 7.75 (96.9) 7.75 (96.9) 7.75 (96.9) L Dia Min.5 (3.8).5 (3.8).5 (3.8).5 (3.8).5 (3.8).5 (3.8).82 (4.6).82 (4.6).82 (4.6).82 (4.6).23 (5.4).23 (5.4).23 (5.4).23 (5.4).23 (5.4) M Dia Min.35 (3.4).35 (3.4).35 (3.4).35 (3.4).35 (3.4).35 (3.4).35 (3.4).35 (3.4).35 (3.4).66 (4.2).66 (4.2).82 (4.6).82 (4.6).82 (4.6).82 (4.6). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-4
MS2750 and MS27502 Protective overs Protective overs MIL-DTL-38999 Series I MS2750 = Plug over MS27502 = Receptacle over MS2750 9 L inish = old Iridite Over admium Over Nickel = 500 Hour admium Olive Drab = nodize = lectroless Nickel Dash No. Length (Omit for Standard) L = 5.0 (27.0) M = 6.0 (52.4) MS2750 Only N = 7.0 (77.8) MS2750 Only ttachment Style = No ttachment = hain N = hain with Ring (MS27502 Only).90 (.9) asket J ttachment.67 (4.2) Dia.82 (.8) H asket J ttachment Style.67 (4.2) Dia MS2750 Plug over K MS27502 Receptacle over MS27502 ttachment Type N TL I 9 3 5 7 9 2 23 25 Dia.8 (.8).940 (23.9).070 (27.2).90 (30.2).3 (33.5).440 (.6).570 (39.9).690 (42.9).8 (46.2) H.82 (.8).94 (23.9).0 (27.9). (3.0).34 (34.0).46 (37.).58 (40.).70 (43.2).83 (46.5) J Nom Length 3.00 (76.2) 3.00 (76.2) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 4.00 (0.6) 4.00 (0.6) 4.00 (0.6) K Dia Min.70 (7.8).84 (2.3).0 (25.7).4 (29.0).26 (.0).39 (35.3).5 (38.4).64 (4.7).76 (44.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-5
Protective overs MS2750 and MS275 Protective overs MIL--38999 Series II MS2750 = Plug over MS275 = Receptacle over MS2750 8 L inish = old Iridite Over admium Over Nickel = 500 Hour admium Olive Drab = nodize = lectroless Nickel Length (Omit for Standard) L = 5.0 (27.0) M = 6.0 (52.4) MS2750 Only N = 7.0 (77.8) MS2750 Only ttachment Style = No ttachment = hain N = hain with Ring (MS275 Only) R = Rope (MS275 Only).570 (4.5) asket J ttachment Style.67 (4.2) Dia.570 (4.5) H asket J ttachment Style.67 (4.2) Dia MS2750 Plug over K MS275 Receptacle over MS275 ttachment Type N TL I 8 0 2 4 6 8 Dia.7 (8.3).850 (2.6).000 (25.4).30 (.7).250 (3.8).380 (35.).500 (38.).630 (4.4).750 (44.5) H Dia.630 (6.0).76 (9.3).9 (23.8).074 (27.3).72 (29.8).304 (33.).435 (.4).560 (39.6).688 (42.9) J Nom Length 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 4.00 (0.6) 4.00 (0.6) 4.00 (0.6) K Dia Min.890 (.6).00 (25.7).40 (29.0).260 (.0).390 (35.3).50 (38.4).640 (4.7).760 (44.7).890 (48.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-6
M840/3 and M840/5 Protective overs Protective overs MIL--840 M840/3 = Receptacle over M840/5 = Plug over M840/3 H W Material and inish W = luminum, 500 Hour admium Olive Drab. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses..780 (9.8) Designator ttachment Style = hain with astener = hain with Ring for Jam Nut Receptacle (M840/3) = hain with Ring (M840/5) = hain with Ring for able Receptacle (M840/3 Only).000 (25.4) asket ttachment Style J Dia ttachment Style.56 (4.0) Dia 5.0 (27.0) Thread M840/3 Receptacle over H for Type K for Type 5.0 (27.0) Thread M840/5 Plug over M840/3 ttachment Types & MS840/5 ttachment Type Desig. D H J (Ref.) 3 5 7 9 23 25 29 33 Thread 0.750-0.P-0.2L-DS 0.875-0.P-0.2L-DS.062-0.P-0.2L-DS.25-0.P-0.2L-DS.-0.P-0.2L-DS.500-0.P-0.2L-DS.625-0.P-0.2L-DS.82-0.P-0.2L-DS 2.000-0.P-0.2L-DS.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2) TL I Dia ±.00 (.3).765 (9.4).890 (.6).05 (25.8).40 (29.0).265 (.).453 (.9).577 (40.).890 (48.0) 2.077 (52.8) H Dia ±.00 (.3).890 (.6).05 (25.8).3 (30.6).265 (.).453 (.9).640 (4.7).765 (44.8).953 (49.6) 2.40 (54.4) J Dia ±.005 (.).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).30 (3.3).56 (4.0).56 (4.0).93 (4.9) K Dia ±.00 (.3).765 (9.4).890 (.6).05 (25.8).40 (29.0).265 (.).453 (.9).577 (40.).890 (48.0) 2.077 (52.8) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-7
Protective overs D38999/ and D38999/33 Protective overs MIL-DTL-38999 Series III Threaded D38999/ = Plug over D38999/33 = Receptacle over D38999/ W 5 R Material and inish W = luminum, 500 Hour admium Olive Drab J = omposite, admium Olive Drab M = omposite, lectroless Nickel ttachment Style (R or N).8 (30.0) asket Style N D38999/ Plug over Style R.67 (4.2) Dia. J Dia Length ** Thread.906 (23.0) asket Style N ** Rope Length 5.000 (27.0) +.50 (+3.0) -.25 (-7.0) D38999/33 Receptacle over Thread Style R.67 (4.2) Dia. H Dia Length ** TL I 9 3 5 7 9 2 23 25 Thread.6250-0.P-0.3L-TS.7500-0.P-0.3L-TS.8750-0.P-0.3L-TS.0000-0.P-0.3L-TS.875-0.P-0.3L-TS.2500-0.P-0.3L-TS.3750-0.P-0.3L-TS.5000-0.P-0.3L-TS.6250-0.P-0.3L-TS.906 (23.0).0 (26.0).2 (3.0).300 (33.0).457 (37.0).575 (40.0).7 (44.0).8 (46.0).969 (50.0).906 (23.0).02 (.0).2 (3.0).260 (.0).457 (37.0).535 (39.0).654 (42.0).772 (45.0).929 (49.0) H Min.694 (7.6).865 (.0).989 (25.).78 (29.9).260 (.0).4 (.3).506 (38.3).678 (42.6).750 (44.5) J Min.52 (3.0).709 (8.0).787 (.0).906 (23.0).0 (26.0).42 (29.0).260 (.0).339 (34.0).535 (39.0). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-8
M85/7, M85/8, and M85/29 Protective overs Protective overs MIL--85 Inactive for New Design M85/7-6 M85/7 = Plug over Series 2 M85/8 = Receptacle over Series and 2 M85/29 = Plug over Series H asket.885 (.5) asket Dia.6/56 (4./4.0) K Dia.6/56 (4./4.0) J J M85/29 Plug over - Series M85/7 Plug over - Series 2 M85/8 Receptacle over Series and 2 08 0 4 6 8 * * * Dia.845 (2.5).970 (.6).2 (3.0).345 (34.2).470 (37.3).595 (40.5).7 (43.7).845 (46.9) Dia +.000 (0.0) -.006 (0.2).553 (4.0).678 (7.2).9 (23.6).054 (26.8).78 (29.9).303 (33.).4 (.3).553 (39.4) * Not pplicable for M85/7 or M85/8 TL I H M85/29.25 (.6).25 (.6).25 (.6).25 (.6).25 (.6).25 (.6).25 (.6).25 (.6) M85/7.985 (25.0).985 (25.0).985 (25.0).985 (25.0).985 (25.0) J ± One Link 3.0 (76.2) 3.0 (76.2) 3.5 (88.9) 3.5 (88.9) 3.5 (88.9) 3.5 (88.9) 3.5 (88.9) 3.5 (88.9) K Dia.844 (2.4).969 (.6).29 (3.0).345 (34.2).469 (37.3).594 (40.5).79 (43.7).844 (46.8). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-9
Protective overs M83723/59-, M83723/60-, MS27292 and MS27294 Protective overs MIL-DTL-83723 Series III Threaded M83723/59- = Plug over M83723/60- = Receptacle over M83723/59-0 inish = lack nodize R = lectroless Nickel W = admium Over lectroless Nickel ttachment Style = 5.0 (27.0) hain P = 8.0 (3.2) hain R = 5.0 (27.0) Rope T = 8.0 (3.2) Rope N = No ttachment MS27292- MS27292 = Plug over MS27294 = Receptacle over Superceded Part Number See Note 3.757 (9.2) asket Dash No..68 (5.7) Thread M83723/59- Plug over M27292 Plug over (See Note 3) 8 0 2 4 6 8 M27292 M27293 Dash No. 7 2 3 4 5 8 6 9 TL I Length Thread lass 2/2 9/6 - UN /6 - UN 7/8 - UN 5/6 - UN /6-8 UN 3/6-8 UN 5/6-8 UN 7/6-8 UN 9/6-8 UN.25 (3.2) Dia. Dia.776 (9.7).906 (23.0).078 (27.4).4 (29.0).266 (.2).375 (34.9).50 (38.4).625 (4.3).760 (44.7) Thread asket Length M83723/60- Receptacle over M27294 Receptacle over (See Note 3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. MS27292 and MS27294 have a black anodize finish. Dash no. s, 2, and 7 have 3.0 (76.2) wire rope attachment and other dash no. s have a 5.0 (27.0) wire rope attachment..25 (3.2) Dia. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-0
M83723/59-2, M83723/60-2, MS27293 and MS27295 Protective overs Protective overs MIL-DTL-83723 Series III ayonet M83723/59-2 = Plug over M83723/60-2 = Receptacle over M83723/59-2 0 inish = lack nodize R = lectroless Nickel W = admium Over lectroless Nickel ttachment Style = 5.0 (27.0) hain P = 8.0 (3.2) hain R = 5.0 (27.0) Rope T = 8.0 (3.2) Rope N = No ttachment MS27293- MS27293 = Plug over MS27295 = Receptacle over Superceded Part Number See Note 3 Dash No..757 (9.2) asket.68 (5.7) asket.25 (3.2) Dia..25 (3.2) Dia. Length Length M83723/59-2 Plug over M27293 Plug over (See Note 3) M83723/60-2 Receptacle over M27295 Receptacle over (See Note 3) 8 0 2 4 6 8 TL I M27294 M27295 Dash No. 7 2 3 4 5 8 6 9 Dia.776 (9.7).906 (23.0).078 (27.4).4 (29.0).266 (.2).375 (34.9).50 (38.4).625 (4.3).760 (44.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. MS27293 and MS27295 have a black anodize finish. Dash no. s, 2, and 7 have 3.0 (76.2) wire rope attachment and other dash no. s have a 5.0 (27.0) wire rope attachment. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 66-
Miscellaneous ccessories Miscellaneous ccessories an t find it anywhere else in the book? This section of the catalog includes miscellaneous accessories such as Jam Nuts, Potting oots, askets, ushings and iber Optic Termini lenair s Military Superceeding ommercial Page Specification Part Number atalog P/N Description Number MS386 ** Jam Nut 68-2 MS34 ** Telescoping ushing 68-4 MS2752 MS386 ** Jam Nut 68-2* MS2754 MS386 ** Jam Nut 68-2* M840/ ** asket 68-5 M29504/04 8-002 iber Optic Pin Terminus 68-6 M29504/05 8-00 iber Optic Socket Terminus 68-7 D38999/ ** Jam Nut 68-8 M83723/70 ** Receptacle dapter 68-9 S85049/- ** dapter, Non-nv., RI, 90 68-0 S85049/-2 ** dapter 68- S85049/33- ** dapter, Non-nv., RI, Straight 68-2 S85049/74 ** Potting oot 68-3 S85049/75 ** Potting oot 68-4 S85049/93 687-7 anding Split Ring 68-5 S85049/94 ** Mounting lange, ull Perimeter 68-6 S85049/95 ** Mounting lange, 3/4 Perimeter 68-7 S85049/96 ** Mounting lange, /4 Perimeter 68-8 M855/ ** Mounting lange, ull Perimeter 68-9 M855/2 ** Mounting lange, 3/4 Perimeter 68- M855/3 ** Mounting lange, /4 Perimeter 68-8 * Page Number of Superceeding Part Number ** onsult actory 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-
Miscellaneous ccessories 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 D - Number of Slots MIL-DTL- 505 8S 0S, 0SL 2S, 2 4S, 4 6S, 6 8 40 44 48 MIL-DTL- 26482 8 0 2 4 6 8 Safety Wire Holes (3 qually Spaced).045 (.) Min MIL-DTL- 26500 8 0 2 4 6 8 TL I Thread MS386 Jam Nut Material: = luminum S = Steel = RS Dash No. OR ONNTOR SHLL SIZ (R.) MIL-DTL- 83723 I 8 0 2 4 6 8 MIL-DTL- 83723 III 8 0 2 4 6 ay 6 Thd 8 MIL-DTL- 38999 I 9 3 5 7 9 2 23 25 MS386 3 inish: = lack nodize = lack admium over orrosion Resistant Steel N = lectroless Nickel (Space Use Only) P = Passivated W = admium Olive Drab Over lectroless Nickel MIL-DTL- 38999 II 8 0 2 4 6 8 MIL-- 840 3 5 7 9 23 25 29 33 MIL-- 27599 9 8 0, 3 2, 5 4, 7 6, 9 8, 2, 23, 25 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-2
MS386 Jam Nut Miscellaneous ccessories 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30.500 - UN-2.5625 - UN-2.625 - UN-2.625 - UN-2.625 - UN-2.6875 - UN-2.750 - UN-2.825 - UN-2.875 - UN-2.9375 - UN-2.000 - UN-2.25 - UN-2.25-8 UN-2.875-8 UN-2.250 - UN-2.250-8 UN-2.375-8 UN-2.4375-8 UN-2.500 - UN-2.500-8 UN-2.625-8 UN-2.750-8 UNS-2.875-6 UN-2.9375-6 UN-2 2.000-8 UNS-2 2.25-6 UN-2 2.250-6 UN-2 2.500-6 UN-2 2.750-6 UN-2 3.000-6 UN-2 TL II ±.07 (.4).687 (7.4).750 (9.).82 (.6).82 (.6).82 (.6).875 (.2).937 (23.8).000 (25.4).062 (27.0).23 (.5).88 (30.2). (33.3). (33.3).375 (34.9).438 (.5).438 (.5).562 (39.7).625 (4.3).688 (42.9).688 (42.9).82 (46.0) 2.000 (50.8) 2.25 (54.0) 2.87 (55.5) 2.250 (57.2) 2.375 (60.3) 2.500 (63.5) 2.750 (69.9) 3.000 (76.2) 3.250 (82.6) None.35 (3.4) None None None.35 (3.4) None.35 (3.4).35 (3.4) None.35 (3.4) None.35 (3.4) None None.35 (3.4).92 (4.9) None None.92 (4.9).92 (4.9).92 (4.9) None None None None None None None None D Min. No. of Slots None 2 None None None None None None None None None None None None None None None None None None Dia ±.07 (.4).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).25 (3.2).89 (4.8).89 (4.8).89 (4.8).89 (4.8).89 (4.8).89 (4.8).89 (4.8). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-3
Miscellaneous ccessories MS34 Telescoping ushing MS34-3.062 (.6) D Dash No. Material is Rubber per MIL-STD-47 MS34-3 L 2.000 (50.8) ±.03 (.8) Dash No. Material = Rubber per MIL-STD-47 D = Silicone Rubber L = luorosilicone Rubber Dash No. 3 4 6 8 0 2 6 8 40 Dia.30 (3.3).2 (5.6). (7.9).437 (.).562 (4.3).625 (5.9).750 (9.) n/a.937 (23.8).250 (3.8).375 (34.9).6 (4.2).874 (47.6) Dia. (5.3).302 (7.7).427 (0.8).552 (4.0).65 (5.6).740 (8.8).927 (23.5) n/a.0 (3.5).5 (34.7).64 (4.0).864 (47.3) 2.4 (60.0) TL I Dia.379 (9.6).505 (2.8).69 (5.7).744 (8.9).889 (.6).084 (27.5).34 (33.4) n/a.598 (40.6).847 (46.9) 2.085 (53.0) 2.335 (59.3) 2.835 (72.0) D Dim 2.875 (73.0) 2.750 (69.9) 2.625 (66.7) 2.500 (63.5) 2.375 (60.3) 2.250 (57.2) 2.25 (54.0) n/a 2.000 (50.8).875 (47.6).750 (44.5).625 (4.3).500 (38.) Dia.25 (3.2).29 (5.6). (7.9).438 (.).438 (.).54 (3.7).750 (9.).938 (23.8).938 (23.8).25 (.6).250 (3.8).625 (4.3).875 (47.6) Dia. (5.3).302 (7.7).427 (0.8).53 (3.5).65 (5.6).740 (8.8).927 (23.5).5 (.3).0 (3.5).5 (34.7).64 (4.0).865 (47.4) 2.5 (60.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-4
M840/ asket Miscellaneous ccessories M840/ Designator Material = lorinated Silicone = MI Shielding - Rubber Square Square Dia D Dia (4 Places) Designator D H J 3 5 7 9 23 25 29 33 Sq. ±.00 (.3).750 (9.).843 (2.4).968 (.6).05 (25.8).40 (29.0). (.5).392 (35.4).568 (39.8).734 (44.0) TL I Dia ±.008 (.2).758 (9.3).883 (.4).070 (27.2).33 (.8).3 (33.5).508 (38.3).633 (4.5).883 (47.8) 2.070 (52.6) Sq. ±.008 (.2).03 (26.2).46 (29.).266 (.2).39 (35.3).56 (38.5).726 (43.8).826 (46.4) 2.46 (54.5) 2.3 (59.3) D Dia ±.00 (.3). (3.0). (3.0). (3.0). (3.0). (3.0). (3.0).47 (3.7).47 (3.7).73 (4.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-5
Miscellaneous ccessories M29504/04 6 iber Optic Pin Terminus.062 (.6) Dia. Dia..297 (7.5).783 (9.9).266 (6.8).03 (0.8).069 (.8) Dia..080 (2.0) able Dia. Shrink Tube.50 (2.7) TL I Part Number M29504/04-4039 M29504/04-4040 M29504/04-4040 M29504/04-4042 M29504/04-4087 iber ore/ladding (Micron) 9/25 (Single Mode) 50/25 62.5/25 00/40 00/40/72 (Polyimide) Diameter (Microns) 25 26 26 42 75. Metric dimensions (mm) are in parentheses and are for reference only. 2. Material/inish: errule - Zerconia eramic/n.. Terminus ody - Stainless Steel/Passivate. Shrink Tube - Kynar/N.. 3. Recommended insertion/removal tool M8969/4-03. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-6
M29504/05 6 iber Optic Socket Terminus Miscellaneous ccessories Protective over lignment Sleeve.5.062 (2.9) (.6) Dia. Dia. Dia..537 (3.6). (.8).025 (26.0).069 (.8) DI Shrink Tube.50 (2.7).080 (2.0) able Dia. Part Number M29504/05-4045 M29504/05-4046 M29504/05-4046 M29504/05-4049 M29504/05-4088 TL I iber ore/ladding (Micron) 9/25 (Single Mode) 50/25 62.5/25 00/40 00/40/72 (Polyimide) Diameter (Microns) 25 26 26 42 75. Metric dimensions (mm) are in parentheses and are for reference only. 2. Material/inish: errule and lignment Sleeve: Zerconia eramic/n.. Terminus ody: Stainless Steel/Passivate. Shrink Tube: Kynar/N.. 3. Recommended insertion/removal tool M8969/4-03. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-7
Miscellaneous ccessories D38999/ Jam Nut lenair onnector Designator H MIL-DTL-38999 Series III & IV, N45 Dash No. D38999/- Material and inish: = luminum, nodize = luminum, lectroless Nickel K = orrosion Resistant Steel Passivate W = luminum, admium Olive Drab over lectroless Nickel Safety Wire Holes (Min. 3 Holes qually Spaced) Dash No. 2 3 4 5 6 7 8 9 0 2 Series III 9 3 5 7 9 2 23 25 Series IV 3 5 7 9 2 23 25 * Modified Minor Diameter TL I lass 2 M7 X - 6H* M X - 6H* M25 X - 6H M X - 6H M3 X - 6H M X - 6H M34 X - 6H M35 X - 6H M38 X - 6H M4 X - 6H M44 X - 6H M47 X - 6H Hex.945 (.00).063 (27.00).260 (.00).47 (.00).64 (4.00).457 (37.00).64 (4.00).64 (4.00).8 (46.00).969 (50.00) 2.07 (5.23) 2.65 (55.00) +.08 (.45) -.000 (.00).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7).25 (3.7). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-8
M83723/70 Receptacle dapter Miscellaneous ccessories MIL-DTL-83723 Series III lasses,, R and W M83723/70 W Dash No. Material and inish: = luminum, lack nodize R = luminum, lectroless Nickel = orrosion Resistant Steel Passivate W = luminum, admium Olive Drab over lectroless Nickel D.442 (.2) 8 0 2 4 6 8 UN-2.5264 -.6875 -.8750 -.9375 -.0625-8.875-8.5-8.4375-8.5625-8 TL I Dia Dia.579 (4.7).525 (3.3).74 (8.).650 (6.5).894 (.7).840 (2.3).954 (.2).900 (.9).079 (27.4).025 (26.0).4 (30.6).50 (29.2).9 (33.8).275 (.4).454 (.9).400 (35.6).579 (40.).525 (38.7) D Dia.689 (7.5).84 (.7).00 (25.4).064 (27.0).89 (30.2).330 (33.8).455 (37.0).580 (40.).705 (43.3). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-9
Miscellaneous ccessories S85049/- 90 dapter, Non-nvironmental, RI MIL-DTL-38999 Series I & II M85049/3 Dash No. D Thread Dia Dia ntrance onfiguration to ccomodate M85049/-2 (Page 68-9) dapter Reducer Dash No. 8 0 2 4 6 8 Series I 9 3 5 7 9 2 23 25 Series II 8 0 2 4 6 8 Dia.594 (5.).79 (8.3).844 (2.4).969 (.6).094 (27.8).29 (3.0).344 (34.).469 (37.3).594 (40.5) TL I Dia.359 (9.).406 (0.3).500 (2.7).578 (4.7).64 (6.3).688 (7.5).734 (8.6).796 (.2).859 (2.8).79 (8.3).766 (9.5).859 (2.8).938 (23.8).000 (25.4).047 (26.6).094 (27.8).56 (29.4).29 (3.0) D Thread lass 2.4375 - UN.5625 - UN.6875 - UN.825 - UN.9375 - UN.0625-8 UN.875-8 UN.5-8 UN.4375-8 UN. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: opper alloy. inish: Tin-lead solder plate. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-0
S85049/-2 dapter Reducer Miscellaneous ccessories MIL-DTL-38999 Series I & II M85049/-2-8 Dash No. Dia Dia 2 Holes.062 (.6) ±.05 (.4).438 (.) ±.03 (.8).5 (2.9) Min.. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: opper alloy. inish: Tin-lead solder plate. 4. dapter reducer for use with M85049/- and M85049/33-. Dia Dash No. 8 82 83 0 2 23 4 42 43 44 45 46 6 62 63 64 65 8 82 83 84 85 2 3 4 5 6 2 3 2 5 its dapter 8 8 8 0 2 2 2 4 4 4 4 4 4 6 6 6 6 6 8 8 8 8 8 TL I Dia Dia Ref Min.29 (7.4).63 (4.).29 (7.4).7 (4.3).29 (7.4).87 (4.7).346 (8.8).26 (5.5).44 (.2).97 (5.0).44 (.2).26 (5.5).44 (.2).279 (7.).506 (2.9).26 (5.5).506 (2.9).9 (7.3).506 (2.9).3 (7.9).506 (2.9).342 (8.7).506 (2.9).359 (9.).57 (4.5).386 (9.8).57 (4.5).26 (5.5).57 (4.5).9 (7.3).57 (4.5).342 (8.7).57 (4.5).405 (0.3).57 (4.5).7 (8.3).66 (5.6).26 (5.5).66 (5.6).9 (7.3).66 (5.6).342 (8.7).66 (5.6).380 (9.7).66 (5.6).450 (.4).664 (6.9).7 (8.3).664 (6.9).390 (9.9).664 (6.9).444 (.3).664 (6.9).405 (0.3).664 (6.9).483 (2.3).664 (6.9).499 (2.7).738 (8.7).358 (9.).738 (8.7).437 (.).738 (8.7).452 (.5).738 (8.7).468 (.9).738 (8.7).56 (4.2).796 (.2).593 (5.).29 (5.6).234 (5.9).266 (6.8).266 (6.8).3 (8.3).266 (6.8).344 (8.7).359 (9.).39 (9.9).406 (0.3).438 (.).266 (6.8).344 (8.7).39 (9.9).453 (.5).375 (9.5).266 (6.8).344 (8.7).39 (9.9).430 (0.9).500 (2.7).375 (9.5).453 (.5).500 (2.7).469 (.9).53 (3.5).547 (3.9).406 (0.3).484 (2.3).500 (2.7).56 (3.).609 (5.5).64 (6.3) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-
Miscellaneous ccessories S85049/33- dapter, Non-nvironmental, RI MIL-DTL-38999 Series I & II M85049/338 Dash No. Thread D Dia Dia Dia ntrance onfiguration to ccomodate M85049/-2 (Page 68-9) dapter Reducer Dash No. 8 0 2 4 6 8 Series I 9 3 5 7 9 2 23 25 Series II 8 0 2 4 6 8 Dia.594 (5.).79 (8.3).844 (2.4).969 (.6).094 (27.8).29 (3.0).344 (34.).469 (37.3).594 (40.5) TL I Dia.359 (9.).406 (0.3).500 (2.7).578 (4.7).64 (6.3).688 (7.5).734 (8.6).796 (.2).859 (2.8) Dia.56 (3.).64 (6.3).766 (9.5).89 (.6).06 (25.8).4 (29.0).265 (.).39 (35.3).56 (38.5) D.844 (2.4).969 (.6).094 (27.8).56 (29.4).29 (3.0).344 (34.).469 (37.3).594 (40.5).79 (43.7) Thread lass 2.4375 - UN.5625 - UN.6875 - UN.825 - UN.9375 - UN.0625-8 UN.875-8 UN.5-8 UN.4375-8 UN. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: opper alloy. inish: Tin-lead solder plate. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-2
M85049/74 Potting oot Miscellaneous ccessories or Use With M85049/6 Potting oot Ring (Page 30-3) M85049/74-0- eometry = Straight 2 = 90 D Straight oot 90 oot Min ross Section 8 0 2 4 6 8 Min.450 (.4).450 (.4).450 (.4).450 (.4).450 (.4).450 (.4).550 (4.0).550 (4.0).550 (4.0).500 (2.7).500 (2.7).500 (2.7).500 (2.7).500 (2.7).500 (2.7).594 (5.).594 (5.).594 (5.) Dia ±.005 (.).5 (3.0).637 (6.2).76 (9.3).887 (.5).03 (25.7).37 (.9).263 (.).387 (35.2).53 (38.4) TL I Min ID.37 (8.).434 (.0).548 (3.9).673 (7.).798 (.3).899 (.8).0 (26.0).49 (29.2).274 (.4) D.766 (9.5).9 (23.4).03 (26.2).06 (25.8).06 (25.8).078 (27.4).094 (27.8).094 (27.8). (.5).000 (25.4).25 (.6).25 (.6).297 (.9).375 (34.9).469 (37.3).625 (4.3).703 (43.3) 2.047 (52.0) Min.0 (2.8).0 (5.).290 (7.4).400 (0.2).490 (2.4).590 (5.0).730 (8.5).860 (2.8).070 (27.2).608 (5.4).734 (8.6).858 (2.8).984 (25.0).0 (.2).234 (3.3).0 (34.5).484 (37.7).60 (40.9). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Translucent nylon, mimimum wall thickness.0 (.5). 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-3
Miscellaneous ccessories S85049/75 Potting oot or Use With M85049/58 Potting oot Ring (Page 30-2) M85049/75-0- eometry = Straight 2 = 90.297 (7.5).03 (.8) ±.00 (.3) D.03 (.8) ±.00 (.3) Straight oot 90 oot Min ross Section 8 0 2 4 6 8 Dia ±.005 (.).527 (3.4).652 (6.6).776 (9.7).898 (.8).06 (25.8).40 (29.0).265 (.).390 (35.3).55 (38.5) Min ID.434 (.0).548 (3.9).673 (7.).798 (.3).899 (.8).0 (26.0).49 (29.2).274 (.4).399 (35.5) TL I D.438 (.).469 (.9).562 (4.3).79 (8.3).78 (9.8).844 (2.4).906 (23.0).938 (23.8).03 (26.2).766 (9.5).89 (.6).03 (26.2).56 (29.4).7 (.7).406 (35.7).53 (38.9).656 (42.).78 (45.2) Min.073 (.9).7 (3.0).6 (5.2).384 (9.8).443 (.3).56 (4.2).693 (7.6).840 (2.3).999 (25.4). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Material: Translucent nylon. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-4
S85049/93 anding Split-Ring Miscellaneous ccessories M85049/93-0 Dash No.. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Use with lenair banding backshells and braid socks. onsult factory for specific application part numbers. Dash No. 04 06 08 0 2 4 6 8 26.88 (.4) TL I Dia ±.0 (0.3).25 (6.4).38 (9.7).50 (2.7).63 (6.0).75 (9.).88 (.4).00 (25.4).3 (.7).25 (3.8).38 (35.).50 (38.).63 (4.4).75 (44.5) Dia ±.03 (0.8). (9.).49 (2.4).6 (5.5).74 (8.8).86 (2.8).99 (25.). (.2). (3.5). (34.5).49 (37.8).6 (40.9).74 (44.2).86 (47.2) Shrink Sleeve or Shrink oot Tap Wrap SMPL PPLITION Split Ring.50 (2.7) Min. Shield Pig Tail or Drain Wire ccomodates 600-052 and and-it and Shield Sock Solder Sleeve and-it and 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-5
Miscellaneous ccessories S85049/94 Mounting lange, ull Perimeter M85049/94-0- = Primer oat Required D.040 (.02) ±.003 (0.8) Nut, Self-Locking, linch MIL-N-45938 Type, 4 Places TL I 8 0 2 4 6 8 25 Thread UNJ-3 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 6-6- ±.05 (0.38).594 (5.).79 (8.3).82 (.6).906 (23.0).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).980 (.9).034 (26.3).9 (.4).23 (30.8).295 (.9).42 (.).550 (39.4).680 (42.7).800 (45.7).90 (48.5) +.05 (.4).570 (4.5).7 (8.3).855 (2.7).984 (25.0).094 (27.8).2 (3.0).345 (34.2).478 (37.5).595 (40.5).658 (42.) D.06 (.66).06 (.66).06 (.66).06 (.66).06 (.66).06 (.66).06 (.66).06 (.66).23 (.83).23 (.83). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-6
S85049/95 Mounting lange, 3/4 Perimeter Miscellaneous ccessories M85049/95-0- = Primer oat Required and lass D. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. & lass 3 7 8 0 0 2 2 4 4 6 6 8 8 9 25 27 37 6.040 (.02) ±.003 (0.8) Thread UNJ-3 4-40 4-40 4-40 4-40 6-4-40 6-4-40 6-4-40 6-4-40 6-4-40 4-40 6-4-40 6-6- 6-6- 4-40 6-6- 6-4-40 4-40 Nut, Self-Locking, linch MIL-N-45938 Type, 4 Places TL I ±.003 (.).625 (5.9).79 (8.3).594 (5.).79 (8.3).82 (.6).82 (.6).938 (23.8).906 (23.0).03 (26.2).969 (.6).25 (.6).062 (27.0).3 (30.6).906 (23.0).56 (29.4).297 (.9).250 (3.8).375 (34.9).500 (38.).375 (34.9).500 (38.).969 (.6).562 (39.7).750 (44.5).938 (49.2).87 (30.).437 (.5) ±.05 (.4).925 (23.5).09 (25.9).880 (.4).09 (25.9). (33.3).04 (.0). (33.3).98 (30.4).406 (35.7).0 (.5).500 (38.).406 (35.7).578 (40.).92 (30.3).535 (39.0).688 (42.9).665 (42.3).738 (44.).89 (48.0).785 (45.3).89 (48.0).255 (3.9) 2.000 (50.8) 2. (58.7) 2.500 (63.5).500 (38.).82 (46.0) +.05 (.4) -.000 (.0).64 (6.3).688 (7.5).570 (4.5).7 (8.3).749 (9.0).855 (2.7).938 (23.8).984 (25.0).03 (26.2).094 (27.8).25 (.6).2 (3.0).234 (3.3).953 (.2).345 (34.2).359 (34.5).478 (37.5).483 (37.7).560 (39.6).595 (40.5).658 (42.).094 (27.8).8 (46.2) 2.062 (52.4) 2. (58.7). (.5).594 (40.5) D ±.030 (.8). (3.5). (3.5). (3.5). (3.5).53 (3.9). (3.5).53 (3.9). (3.5).53 (3.9). (3.5).53 (3.9). (3.5).53 (3.9). (3.5). (3.5).53 (3.9). (3.5).53 (3.9).53 (3.9).53 (3.9).53 (3.9). (3.5).53 (3.9).53 (3.9).53 (3.9). (3.5). (3.5) ±.030 (.76).5 (8.3).433 (.0).308 (7.8).433 (.0).433 (.0).530 (3.5).526 (3.4).6 (5.8).6 (5.7).687 (7.4).683 (7.3).780 (9.8).776 (9.7).6 (5.7).874 (.2).865 (.0).968 (.6).907 (23.0).000 (25.4).03 (26.2).25 (.6).683 (7.3).25 (.6).88 (30.2).375 (34.9).874 (.2).602 (40.7) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-7
Miscellaneous ccessories S85049/96 and M855/3 Mounting lange, /4 Perimeter D Nut, Self-Locking, linch MIL-N-45938 Type, 2 Places M85049/96-0- = Primer oat Required M855/3-0-0.040 (.0) ±.003 (.) Numerical designation 0 indicates corrosion resistant nuts are required. Omit for alloy steel nuts. 3 6* 7 8 0 2 4 6 8 9 25 27 37 6 Thread UNJ-3 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 6-6- 4-40 6-6- 6-4-40 4-40 ±.003 (.).625 (5.9).469 (.9).79 (8.3).594 (5.).79 (8.3).82 (.6).906 (23.0).969 (.6).062 (27.0).906 (23.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).969 (.6).562 (39.7).750 (44.5).938 (49.2).87 (30.).437 (.5) * 6 - vailable in M855/3 only. TL I ±.05 (.4).925 (23.5).766 (9.5).06 (25.8).89 (.6).06 (25.8).09 (.2).3 (30.6).266 (.2).390 (35.3).3 (30.6).50 (38.4).640 (4.7).760 (44.7).859 (47.2).266 (.2) 2.000 (50.8) 2. (58.7) 2.500 (63.5).500 (38.).82 (46.0) +.00 (.3) -.000 (.0).300 (7.6).298 (7.6).298 (7.6).296 (7.5).298 (7.6).296 (7.5).296 (7.5).298 (7.6).3 (8.3).296 (7.5).354 (9.0).390 (9.9).386 (9.8).358 (9.).298 (7.6).438 (.).562 (4.3).562 (4.3).34 (8.0).376 (9.6) D ±.030 (.8). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5).53 (3.9).53 (3.9). (3.5).53 (3.9).53 (3.9).53 (3.9). (3.5). (3.5). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-8
M855/ Mounting lange, ull Perimeter Miscellaneous ccessories M855/-0 = Primer oat Required D.040 (.0) ±.003 (.) Nut, Self-Locking, linch Type per MIL-N-45938/7, 4 Places 8 0 2 4 6 8 25 Thread UNJ-3 4-40 4-40 4-40 4-40 4-40 4-40 4-40 4-40 6-6- TL I ±.003 (.) ±.05 (.4).594 (5.).79 (8.3).82 (.6).906 (23.0).969 (.6).062 (27.0).56 (29.4).250 (3.8).375 (34.9).500 (38.).880 (.4).005 (25.5).098 (27.9).92 (30.3).255 (3.9).348 (34.2).500 (38.).625 (4.3).750 (44.5).89 (48.0) -.00 (.3).570 (4.5).700 (7.8).8 (.8).945 (.0).070 (27.2).96 (30.4).3 (33.5).440 (.6).570 (39.9).658 (42.) D ±.030 (.8). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5). (3.5).53 (3.9).53 (3.9). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-9
Miscellaneous ccessories M855/2-8 0 M855/2 Mounting lange, 3/4 Perimeter = Primer oat Required and lass D Numerical designation indicates corrosion resistant nuts are required. Omit for alloy steel nuts.. or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses..040 (.0) ±.003 (.) Nut, Self-Locking, linch Type per MIL-N-45938, 4 Places & lass 3 6 7 8 0 0 2 2 4 4 6 6 8 8 9 25 27 37 6 Thread UNJ-3 4-40 4-40 4-40 4-40 4-40 6-4-40 6-4-40 6-4-40 6-4-40 6-4-40 4-40 6-4-40 6-4-40 6-6- 4-40 6-6- 6-4-40 4-40 ±.003 (.).625 (5.9).469 (.9).79 (8.3).594 (5.).79 (8.3).82 (.6).82 (.6).938 (23.8).906 (23.0).03 (26.2).969 (.6).25 (.6).062 (27.0).3 (30.6).906 (23.0).56 (29.4).297 (.9).250 (3.8).375 (34.9).500 (38.).375 (34.9).500 (38.).969 (.6).562 (39.7).750 (44.5).938 (49.2).87 (30.).437 (.5) TL I ±.05 (.4).925 (23.5).755 (9.2).09 (25.9).880 (.4).09 (25.9).87 (30.).04 (.0). (33.3).98 (30.4).406 (35.7).0 (.5).500 (38.).406 (35.7).578 (40.).92 (30.3).535 (39.0).688 (42.9).665 (42.3).738 (44.).89 (48.0).785 (45.3).89 (48.0).255 (3.9) 2.000 (50.8) 2. (58.7) 2.500 (63.5).500 (38.).82 (46.0) ±.00 (.4).64 (6.3).6 (9.3).688 (7.5).570 (4.5).7 (8.3).749 (9.0).855 (2.7).938 (23.8).984 (25.0).03 (26.2).094 (27.8).25 (.6).2 (3.0).234 (3.3).953 (.2).345 (34.2).359 (34.5).478 (37.5).483 (37.7).560 (39.6).595 (40.5).658 (42.).094 (27.8).8 (46.2) 2.062 (52.4) 2. (58.7). (.5).594 (40.5) D ±.030 (.8). (3.5). (3.5). (3.5). (3.5). (3.5).53 (3.9). (3.5).53 (3.9). (3.5).53 (3.9). (3.5).53 (3.9). (3.5).53 (3.9). (3.5). (3.5).53 (3.9). (3.5).53 (3.9).53 (3.9).53 (3.9).53 (3.9). (3.5).53 (3.9).53 (3.9).53 (3.9). (3.5). (3.5) ±.0 (.5).5 (8.3).83 (4.6).433 (.0).308 (7.8).433 (.0).433 (.0).530 (3.5).526 (3.4).6 (5.8).6 (5.7).687 (7.4).683 (7.3).780 (9.8).776 (9.7).6 (5.7).874 (.2).865 (.0).968 (.6).907 (23.0).000 (25.4).03 (26.2).25 (.6).683 (7.3).25 (.6).88 (30.2).375 (34.9).874 (.2).602 (40.7) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 68-
M758 lexible Waterproof MI/MP onduit and ssociated nd ittings onduit & ccessories lenair's M758 Series conduit and associated fittings have been tested and qualified in accordance with MIL-- 758 (SH). lenair's M758 products are designed to shield cables from electromagnetic radiation, electromagnetic pulse, and to provide weatherproofing. lenair's M758 Series products offer the highest level of performance and quality while providing a field-installable and cost-effective conduit system. lenair uniquely offers three types of conduit conforming to MIL--758 (SH): or superior shielding performance and crush resistance, lenair's standard M758/ conduit offers a brass inner core with a bronze overbraid, sealed from the weather by a neoprene outer jacket. The brass conduit may also be ordered with a compressed inner core for increased flexibility. or applications where crush resistance is not required, lenair offers a fluorocarbon (P) inner core with two tin over copper braids and a neoprene outer jacket. MIL--758 specifies the following platings for fitting materials: RS-Passivate; luminum-admium over lectroless Nickel; rass-no plating. lenair continues to design and manufacture many additional MIL--758 style products to meet specific customer and industry needs. Other lenair conduit products include: Series 75 lexible Metal ore onduit (IW MIL-- 3909/--520), MIL--840 ounduit and ittings, and NVS RP00 and R00 series fitting. Please consult the factory if you have applications not covered by this catalog product offering. Military Specification Description Page P00 NVS Series P00 ittings 7-4 M758/ lexible Weatherproof MI-MP onduit 7-2 M758/2 Straight onduit itting for M758/9 thru /9 7-3 M758/3 45 onduit itting for M758/9 thru /9 7-4 M758/4 90 onduit itting for M758/9 thru /9 7-5 M758/5 onduit-to-panel itting 7-6 M758/6 onduit-to-threaded Pipe itting 7-7 M758/7 onduit-to-stuffing Tube 7-8 M758/8 onduit-to-onduit itting 7- M758/9 dapter for MIL-DTL-505 onnectors (MS300 Series) 7-2 M758/0 dapter for Triaxial onnectors 7-4 M758/ dapter for oaxial onnectors 7-6 M758/2 dapter for MIL-DTL-26482 Series I onnectors 7-8 M758/3 dapter for MS355-type onnectors 7- M758/4 dapter for MIL--840-type onnectors 7- M758/5 dapter for MS235 Stuffing Tube 7- M758/6 dapter for Miscellaneous Thread 7-26 M758/7 dapter for Tapered Pipe Thread 7- M758/8 dapter for Straight Pipe Thread 7-29 M758/9 dapter for Panel Termination 7-30 M840/4 lexible Metal ore onduit 7-3 M840/5 MI/MP onduit ackshell 7- M840/ onduit ushing 7-35 M840/25 90 MI dapters for M840 onnectors 7- M840/27 45 MI dapters for M840 onnectors 7-38 M840/30 onduit Union 7-40 RP00 NVS Series RP00 ittings 7-4 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
onduit & ccessories M758/ MI/MP Shielding onduit M758/-6 onduit ode ore Wire Overbraid Weather Jacket O.D. Over ore I.D. O.D. Over Jacket onduit ode 02 03 04 05 06 08 0 2 6 Nominal I.D..375 (9.5).500 (2.7).625 (5.9).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) TL I O.D. I.D. (Over ore) Min ±0.0 (.3).5 (6.2).4 (9.2).370 (9.4).488 (2.4).495 (2.6).6 (5.7).745 (8.9).995 (25.3).5 (3.6).495 (38.0).995 (50.7) 2.495 (63.4) 2.995 (76.).637 (6.2).760 (9.3).880 (.4).92 (30.3).454 (.9).704 (43.3) 2. (56.2) 2.74 (68.9) 3.4 (8.4) O.D. (Over Jacket) ±.040 (.0).580 (4.7).700 (7.8).850 (2.6).980 (.9).00 (27.9).40 (35.8).660 (42.2).90 (48.5) 2.440 (62.0) 2.940 (74.7) 3.440 (87.4) Min end Radius (Inside).250 (3.8) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) 3.750 (95.3) 5.000 (27.0) 6.250 (58.8) 7.500 (90.5) 0.000 (254.0) 2.500 (37.5) 5.000 (38.0). Metric dimensions (mm) are indicated in parentheses. 2. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-2
M758/2 Straight onduit itting onduit & ccessories M758/2-6- onduit ode Material Designator: = luminum = rass = RS Tapered Sleeve Thread J L onduit N Dia M Dia oupling Nut Straight Knurl (Medium oarse) onduit ode 02 03 04 05 06 08 0 2 6 THRD (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN KNURL LNTH ±.06 (5.2).500 (2.7).500 (2.7).6 (5.7).6 (5.7).750 (9.).750 (9.).870 (.).870 (.).000 (25.4).000 (25.4).000 (25.4) TL I J THRD LNTH +.06 (5.2) -.00 -.0. (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) L ON LNTH ±.06 (5.2).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4) M DI (imum).930 (23.6). (.4).250 (3.8).430 (.3).6 (4.).80 (46.0) 2.80 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (.3) N DI (imum).700 (7.8).8 (.8).970 (.6). (.4).2 (3.0).530 (38.9).80 (46.0) 2. (53.8) 2.6 (66.5) 3. (79.2) 3.6 (9.9). The function of the M758/2 fitting is to terminate flexible shielding conduit and to provide a standard thread for attaching all M758/9 through M758/9 fittings. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-3
onduit & ccessories M758/3 45 onduit itting M758/3-6- onduit ode Material Designator: = luminum = rass = RS 45 L Tapered Sleeve onduit S W M Dia Thread Dim, aptive Nut to lbow Measured at ssy onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438- UN 0.563- UN 0.688- UN 0.83- UN 0.938- UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN aptive Nut Knurl Length ±.06 (5.2).500 (2.7).500 (2.7).6 (5.7).6 (5.7).750 (9.).750 (9.).870 (.).870 (.).000 (25.4).000 (25.4).000 (25.4) R +.0 (.3) -.02 (.5).40 (3.6).70 (4.3).70 (4.3).230 (5.8).230 (5.8).290 (7.4).290 (7.4).350 (8.9).350 (8.9).350 (8.9).350 (8.9) Safety Wire Holes (3 Places) TL I L ON LNTH ±.06 (5.2).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4) M Dia S (imum) +.06 (5.2).930 (23.6).370 (9.4). (.4).370 (9.4).250 (3.8).370 (9.4).430 (.3).370 (9.4).6 (4.).370 (9.4).80 (46.0) 2.80 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380(.3).430 (0.9).430 (0.9).430 (0.9).430 (0.9).430 (0.9).500 (2.7) R end Radius ±.06 (5.2).430 (0.9).560 (4.2).750 (9.).870 (.).060 (26.9).370 (34.8).680 (42.7) 2.060 (52.3) 2.680 (68.) 3.30 (84.) 4.500(4.3) W Wall Thickness (Minimum).0 (.7).0 (.7).0 (.7).0 (.7).0 (.7).0 (.7).0 (.7).058 (.5).058 (.5).058 (.5).058 (.5). The function of the M758/3 fitting is to terminate flexible shielding conduit and to provide a standard thread for attaching all M758/9 through M758/9 fittings. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. oupling Nut Straight Knurl (Medium oarse) (3 places) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-4
M758/4 90 onduit itting onduit & ccessories M758/4-6- onduit ode W 90 lbow N Dia Material Designator: = luminum = rass = RS ** Tapered Sleeve onduit M Dia onduit ode 02 03 04 05 06 08 0 2 6 Q Thread. Dim. aptive Nut to lbow Measured at ssy Thread (lass 2) 0.438- UN 0.563- UN 0.688- UN 0.83- UN 0.938- UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN Knurl Length ±.06 (5.2).500 (2.7).500 (2.7).6 (5.7).6 (5.7).750 (9.).750 (9.).870 (.).870 (.).000 (25.4).000 (25.4).000 (25.4) R +.0 (.3) -.02 (.5).40 (3.6).70 (4.3).70 (4.3).230 (5.8).230 (5.8).290 (7.4).290 (7.4).350 (8.9).350 (8.9).350 (8.9).350 (8.9) Safety Wire Hole, 3 Places aptive Nut TL I M Dia (imum).930 (23.6). (.4).250 (3.8).430 (.3).6 (4.).80 (46.0) 2.80 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380(.3) N Dia (imum).700 (7.8).8 (.8).970 (.6). (.4).2 (3.0).530 (38.9).80 (46.0) 2. (53.8) 2.6 (66.5) 3. (79.2) 3.6 (9.9) oupling Nut Str Knurl, Med oarse, 3 Places Q +.06 (5.2).80 (.6).930 (23.6). (.4).250 (3.8).700 (43.2).80 (46.0) 2. (53.8) 2.500 (63.5) 3. (79.2) 3.250 (82.6) 4.500(4.3) R end Radius ±.06 (5.2).430 (0.9).560 (4.2).750 (9.).870 (.).060 (26.9).370 (34.8).680 (42.7) 2.060 (52.3) 2.680 (68.) 3.30 (84.) 4.500(4.3) ** ON LNTH ±.06 (5.2) s 02-06.750 (9.) s 08-.000 (25.4) W Wall Thickness (Minimum).0 (.7).0 (.7).0 (.7).0 (.7).0 (.7).0 (.7).0 (.7).058 (.5).058 (.5).058 (.5).058 (.5). The function of the M758/4 fitting is to terminate flexible shielding conduit and to provide a standard thread for attaching all M758/9 through M758/9 fittings. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-5
onduit & ccessories M758/5 onduit-to-panel itting M758/5-6- onduit ode Material Designator: = luminum = rass = RS.875 (4.8).6875 (7.5) L Tapered Sleeve onduit P Dia D Dia M Dia oupling Nut Nuts (2) Weather asket Straight Knurl, Medium oarse, 4 Places onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.625 - UN 0.750 - UN 0.875 - UN.000 - UN.88-8 UN.438-8 UN.750-6 UN 2.000-6 UN 2.500-6 UN 3.000-6 UN 3.500-6 UN D Dia (Minimum).370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) TL I Knurl Length ±.06 (5.2).500 (2.7).500 (2.7).6 (5.7).6 (5.7).750 (9.).750 (9.).870 (.).870 (.).000 (25.4).000 (25.4).000 (25.4) L one Length ±.06 (5.2).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4) M Dia (imum).930 (23.6). (.4).250 (3.8).430 (.3).6 (4.).80 (46.0) 2.80 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (.3) P Dia (Minimum).870 (.).000 (25.4). (.4).250 (3.8).430 (.3).680 (42.7) 2.000 (50.8) 2.250 (57.2) 3.000 (76.2) 3.500 (88.9) 4.000 (0.6). The function of the M758/5 fitting is to terminate flexible shielding conduit directly to a panel. Two jam nuts are supplied with this fitting. One nut secures the fitting to the panel, and a second nut acts as a lock nut to the first. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-6
M758/6 onduit-to-pipe ittings onduit & ccessories M758/6-6- onduit ode Material Designator: = luminum = rass = RS L Tapered Sleeve onduit P D Dia M Dia (xt NPT) ody oupling Nut Straight Knurl, Medium oarse onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.250-8.00 NPT 0.375-8.00 NPT 0.500-4.00 NPT 0.750-4.00 NPT 0.750-4.00 NPT.000 -.50 NPT.250 -.50 NPT.500 -.50 NPT 2.000 -.50 NPT 2.500-8.00 NPT 3.000-8.00 NPT D Dia (Minimum).370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) TL I L one Length ±.06 (5.2).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4) M Dia (imum).930 (23.6). (.4).250 (3.8).430 (.3).6 (4.).80 (46.0) 2.80 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (.3) P Dia (Minimum).750 (9.).870 (.).960 (.4).80 (30.0).370 (34.8).500 (38.).80 (46.0) 2. (53.8) 2.6 (66.5) 3.250 (82.6) 3.870 (98.3). The function of the M758/6 fitting is to terminate flexible shielding conduit with a reusable fitting having an external tapered pipe thread. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-7
onduit & ccessories M758/7 onduit-to-stuffing Tube itting M758/7-04-- onduit ode Stuffing Tube ode Material Designator: = luminum = rass = RS Tapered Sleeve P H L onduit Dia M Dia Q J oupling Nut Straight Knurl (Medium oarse). The M758/7 adapter couples MIL-S-235/9 through MIL-S-235/7 stuffing tubes to M758/ conduit. 2. ny combination of conduit and stuffing tube sizes may be ordered by identifying the appropriate conduit size and stuffing tube size in the part number configuration. 3. Metric dimensions (mm) are indicated in parentheses. 4. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-8
M758/7 onduit-to-stuffing Tube itting onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 TL I L one Length ±.06 (5.2).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4) M Dia (imum).930 (23.6). (.4).250 (3.8).430 (.3).6 (4.).80 (46.0) 2.80 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (.3) MIL-S-235 Stuffing Tube ode D J K L M N P R S T V W X Y Z Thread (lass 2) 0.875-2 UN.000-2 UN.25-2 UN.250-2 UN.250-2 UN.33-2 UN.500-2 UN.625-2 UN.750-2 UN.83-2 UN 2.000-2 UN 2.063-2 UN 2.88-2 UN 2.33-2 UN 2.688-2 UN 2.875-2 UN 3.000-2 UN 3.25-2 UN 3.250-2 UN 3.375-2 UN 3.563-2 UN 3.750-2 UN 4.000-2 UN Dia.406 (0.3).55 (3.).640 (6.3).750 (9.).82 (.6).843 (2.4).935 (23.7).062 (27.0).7 (29.7).265 (.).406 (35.7).55 (38.5).625 (4.3).750 (44.5).875 (47.6) 2.062 (52.4) 2.87 (55.5) 2. (58.7) 2.500 (63.5) 2.609 (66.3) 2.78 (70.6) 2.875 (73.0) 3.57 (80.2) TL II H ±.02 (.5).063 (27.0).063 (27.0).063 (27.0).063 (27.0).063 (27.0).88 (30.2).88 (30.2).88 (30.2).500 (38.).500 (38.).500 (38.).563 (39.7).563 (39.7).563 (39.7) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 3.25 (79.4) 3.25 (79.4) J ±.02 (.5).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).33 (8.0).33 (8.0).33 (8.0).33 (8.0).33 (8.0).33 (8.0).33 (8.0).438 (.).438 (.) P Dim (Minimum).03 (26.2).25 (.6).250 (3.8).375 (34.9).375 (34.9).438 (.5).656 (42.).78 (45.2).875 (47.6).938 (49.2) 2.88 (55.6) 2.250 (57.2) 2.344 (59.5) 2.469 (62.7) 2.83 (7.5) 2.969 (75.4) 3.094 (78.6) 3. (83.3) 3.438 (87.3) 3.563 (90.5) 3.750 (95.3) 3.875 (98.4) 4.25 (04.8) Q ±.02 (.5).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-9
To Most People It's Just a Rubber onnector over "To Protect and to Serve" t lenair It's a ood Ol' "Marshal ean" We're always hard at work at lenair developing new and improved interconnect products and accessories. Our "Marshal ean" Protective Rubber overs are a fine example even if they have been around for a month of Sunday's. "Marshal eans" provide robust physical and environmental protection while eliminating the damage caused when metal connector covers bang against equipment housings, or when test cables get dragged across the shop floor! The covers come in two material types: a flexible neoprene rubber or a proprietary conductive material which dissipates static electricity. lenair ean Rubber overs have been available for years, but this catalog introduces four new universal models that make order-entry a snap for standard MIL--308 D-Subminiature's, MIL-DTL-8353 Micro-D's, RIN 400's and all uniformily rectangular connectors. t lenair, we reckon a flexible rubber cover is the perfect way to protect an interconnect cable. So isn't it time you hired "Marshal ean" to ride herd on your connector investment? 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany Nordic rance Italy Spain
M758/8 onduit-to-onduit itting onduit & ccessories M758/8-6- onduit ode Material Designator: = luminum = rass = RS Tapered Sleeve onduit.25 (3.2) L.25 (3.2) Min. L Tapered Sleeve onduit M Dia oupling Nut Str. Knurl (Medium oarse) oupling Nut Str. Knurl (Medium oarse) onduit ode 02 03 04 05 06 08 0 2 6 Knurl Length ±.06 (5.2).500 (2.7).500 (2.7).560 (4.2).560 (4.2).6 (5.7).6 (5.7).680 (7.3).680 (7.3).750 (9.).750 (9.).750 (9.) TL I L one Length ±.06 (5.2).750 (9.).750 (9.).750 (9.).750 (9.).750 (9.).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4).000 (25.4) M Dia (imum).930 (23.6). (.4).250 (3.8).430 (.3).6 (4.).80 (46.0) 2.80 (55.4) 2.560 (65.0) 3.060 (77.7) 3.680 (93.5) 4.380 (.3). The function of the M758/8 conduit-to-conduit fitting is to connect two sections of flexible shielding conduit. onsult factory to mate two different sizes of conduit. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
onduit & ccessories M758/9 dapter for MIL-DTL-505 Series 300 onnectors M758/9-6-06-0- onduit ode (See Table I) Material Designator: = luminum = rass = RS -Thread ode (See Table III) Style Designator.88 (4.8) H J.063 (.6) Min L.29 (5.6).25 (3.2) H L D Dia Dia K Dia D Dia Dia K Dia N Dia.50 (2.7) Thread Str. Knurl (Medium oarse).25 (6.4) Thread Str. Knurl (Medium oarse) STYL 0 OR US WHN DIMTR IS RTR THN K DIMTR STYL 02 SM S STYL 0 XPT J DIMNSION IS ZRO STYL 03 OR US WHN DIMTR IS QUL TO OR LSS THN K DIMTR onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5).687 (7.4).82 (.6).937 (23.8).062 (27.0).87 (30.).500 (38.).82 (46.0) 2.25 (54.0) 2.625 (66.7) 3.25 (79.4) 3.625 (92.). The M758/9 adapter couples MIL-DTL-505 connectors (MS300, MS30, MS306, and MS-series backshells) to M758/2, M758/3 or M758/4 fittings. 2. or MIL-DTL-505, MS3400 Series, the M758/3 adapter may be used. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-2 7-75 Q onduit.p65 2 3//09, 5:7 PM
M758/9 dapter for MIL-DTL-505 Series 300 onnectors onduit & ccessories onnector ode D lass & R, & R & R TL II (MIL--505 onnector odes) Manufacturer ll Manufacturers mphenol mphenol endix annon annon Series MS-Series ackshell MS300, MS30, MS306, 97-300, 97-30, 97-306 MS300, MS30, MS306, 69-300, 69-30, 69-306 MS300, MS30, MS306, 0-, 0-7, 0-72, 0-726 MS300, MS30, MS306, -30, -306 MS300, MS30, MS306, Thread ode 0 02 03 04 04 05 05 06 06 07 08 08 09 0 2 3 4 5 6 7 8 9 2 23 25 26 27 29 30 3 onn. 8S 8S 8 8S 0S 0S 0SL 0SL 2, 2S 2,2S 2SL 4, 4S 6, 6S 8,, 40 40 40 44 48 48 TL III ( ode and dapter Dimensions) Thread H D Dia (lass 2) ±.02 (.5) ±.02 (.5) 0.375 - UN 0.438-27 UNS 0.438 - UN 0.500 - UN 0.500 - UN 0.563 - UN 0.563 - UN 0.625 - UN 0.625 - UN 0.688 - UN 0.750 - UN 0.750 - UN 0.875 - UN.000 - UN.25-8 UN.25 - UNS.88-8 UN.250-8 UN.375-8 UN.438-8 UN.625-8 UN.750-8 UNS.875-6 UN.906-8 2.000-8 UNS 2.063-6 UNS 2.063-2.25-6 UN 2.25-8 UN 2.250-6 UN 2.33-6 UNS 2.375-6 UN 2.625-6 UN 2.83-8 2.875-6 UN.80.....250.250.250.250.250.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.30.0.30.0.30.30.30.30.0.30 (4.6) (5.3) (5.3) (5.3) (5.3) (6.4) (6.4) (6.4) (6.4) (6.4) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.) (7.9) (7.) (7.9) (7.) (7.9) (7.9) (7.9) (7.9) (7.) (7.9).500 (2.7).560 (4.2).560 (4.2).6 (5.7).6 (5.7).680 (7.3).680 (7.3).750 (9.).750 (9.).80 (.6).870 (.).870 (.).000 (25.4). (.4).250 (3.8).250 (3.8).30 (33.3).370 (34.8).500 (38.).560 (39.6).750 (44.5).870 (47.5) 2.000 (50.8) 2.030 (5.6) 2. (53.8) 2.80 (55.4) 2.80 (55.4) 2.250 (57.2) 2.250 (57.2) 2.370 (60.2) 2.430 (6.7) 2.500 (63.5) 2.750 (69.9) 2.930 (74.4) 3.000 (76.2) onn. ode (Table II) D,,,,, D,,,,, D, D,,,,,, D,,,,, D,,,,, D,,, D,,,, D,,,, D,,,, D,, D,,, D, D,,, Dia ±.02 (.5).0 (7.).340 (8.6).340 (8.6).370 (9.4).370 (9.4).450 (.4).450 (.4).500 (2.7).500 (2.7).570 (4.5).6 (5.7).6 (5.7).750 (9.).870 (.).000 (25.4).000 (25.4).060 (26.9). (.4).250 (3.8).30 (33.3).500 (38.).6 (4.).750 (44.5).780 (45.2).870 (47.5).930 (49.0).930 (49.0) 2.000 (50.8) 2.000 (50.8) 2. (53.8) 2.80 (55.4) 2.250 (57.2) 2.500 (63.5) 2.680 (68.) 2.750 (69.9) J Style 0* ±.03 (.8).500 (2.7).530 (3.5).530 (3.5).560 (4.2).560 (4.2).590 (5.0).590 (5.0).6 (5.7).6 (5.7).650 (6.5).680 (7.3).680 (7.3).70 (8.0).750 (9.).780 (9.8).780 (9.8).80 (.6).870 (.).000 (25.4).060 (26.9). (.4).80 (30.0).250 (3.8).0 (.5).340 (34.0).370 (34.8).370 (34.8).400 (35.6).400 (35.6).500 (38.).560 (39.6).6 (4.).870 (47.5) 2.060 (52.3) 2. (53.8) * or Style 02, J Dimension is zero. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-3
onduit & ccessories M758/0 dapter for Triaxial onnectors M758/0-6-0-0- onduit ode (See Table I) -Thread ode (See Table II) Material Designator: = luminum = rass = RS Style Designator (ode 0, 02) H L H L D Dia K Dia Dia D Dia K N Straight Knurl, Medium oarse Thread (ode 03, 04).25 (6.4) Thread Str. Knurl (Medium oarse) STYL 0 DPTR WITH INTRNL "" THRD STYL 02 DPTR WITH XTRNL "" THRD. The M758/0 adapter couples triaxial connectors to M758/2, M758/3 or M758/4 fittings. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-4
M758/0 dapter for Triaxial onnectors onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5).687 (7.4).82 (.6).937 (23.8).062 (27.0).87 (30.).500 (38.).82 (46.0) 2.25 (54.0) 2.625 (66.7) 3.25 (79.4) 3.625 (92.) Thread ode 0 02 03 04 onnector Part Number ITT/annon 55-2380 50-2390 5290-0000 ormerly remar 5633 799 6 Thread 0.750-6 UN lass 2 0.875 - UN lass 2.063-8 UN lass 2 865 TL II (MIL-DTL-505 onnector ode).063-8 UN lass 2 D Dia Min..875 (.2).000 (25.4) Min. Dia Min..297 (7.5).55 (3.) N Dia ±.02 (.5).562 (4.3).500 (2.7).9 (23.4).87 (4.7).564 (4.3). (7.9).9 (23.4).7 (5.8).564 (4.3).335 (8.5) able Reference OD Type R-233/U R-58/U ±.02.26.95 (.5) (5.5) (5.0) R-/U R-98/U R-4/U.425 (0.8).4 (0.7).545 (3.8) R-293/U *TR-8 R-4/U R-293/U *TR-8.545 (3.8).500 (2.7).545 (3.8).545 (3.8).500 (2.7) * Times Wire and able o. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-5
onduit & ccessories M758/ dapter for oaxial onnectors M758/-6-0-0- onduit ode (See Table I) -Thread ode (See Table II and Note 2) Material Designator: = luminum = rass = RS Style Designator H L D Dia K Dia N Dia Thread.25 (6.4) Straight Knurl (Medium oarse). The M758/ adapter couples coaxial connectors to M758/2, M758/3 or M758/4 fittings. 2. Select an -thread from Table II which matches that of the back of the nut on the connector being used. If none of the -threads match, substitute the desired -thread information in lieu of the -thread code in the part number. or example, a fitting for a 0.375" conduit with a 0.5- -thread of 0.33" H-length would have the part number: M758/-03-0.5--0.33-. 3. Metric dimensions (mm) are indicated in parentheses. 4. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-6
M758/ dapter for oaxial onnectors onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5).687 (7.4).82 (.6).937 (23.8).062 (27.0).87 (30.).500 (38.).82 (46.0) 2.25 (54.0) 2.625 (66.7) 3.25 (79.4) 3.625 (92.) Thread ode 02 04 06 08 0 2 TL II ( and itting Dimensions) D H Dia ±.03 (.8) ±.02 (.5). (5.3).6 (5.7) Thread (lass 2) 0.375 - UN 0.438 - UN 0.625 - UN 0.688 - UN 0.938 - UN 0.83 - UN.30 (7.9).30 (7.9).30 (7.9).30 (7.9).345 (8.8).433 (.0).568 (4.4).650 (6.5).895 (.7) oaxial able Type R-58 R-3 R-5 R-6 R-2 R-9 R- R-4 R-293 R-57 R-294 R-7 OD.95 (5.0).26 (5.5).3 (8.4).3 (8.4).3 (8.4).4 (0.7).425 (0.8).545 (3.8).545 (3.8).625 (5.9).630 (6.0).870 (.) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-7
onduit & ccessories M758/2 dapter for MIL-DTL-26482 Series I onnectors M758/2-6-0-0- onduit ode (See Table I) Material Designator: = luminum = rass = RS -Thread ode (See Table II) Style Designator.88 (4.8) J.063 (.6) Min L.88 (4.8).25 (3.2) L D Dia Dia K Dia D Dia Dia K Dia N Dia Thread.50 (2.7) Str. Knurl (Medium oarse).25 (6.4) Thread Str. Knurl (Medium oarse) STYL 0 OR US WHN DIMTR IS RTR THN K DIMTR STYL 02 SM S STYL 0 XPT J DIMNSION IS ZRO STYL 03 OR US WHN DIMTR IS QUL TO OR LSS THN K DIMTR. The M758/2 adapter couples MIL-DTL-26482 Series I connectors (MS30, MS3, or MS series) to M758/2, M758/3 or M758/4 fittings. 2. or MIL-DTL-26482 series 2, the M758/3 adapter may be used. 3. Metric dimensions (mm) are indicated in parentheses. 4. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-8
M758/2 dapter for MIL-DTL-26482 Series I onnectors onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5).687 (7.4).82 (.6).937 (23.8).062 (27.0).87 (30.).500 (38.).82 (46.0) 2.25 (54.0) 2.625 (66.7) 3.25 (79.4) 3.625 (92.) Thread ode 07 09 3 5 7 9 2 23 TL II ( ode and dapter Dimensions) onnector Thread D Dia Dia J Style 0 (lass 2) ±.02 (.5) ±.02 (.5) ±.02 (.5) 08 0.438 - UN.590 (5.0).340 (8.6).870 (.) 0 2 4 6 8 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.063-8 UN.88-8 UN.33-8 UN.438-8 UN.70 (8.0).840 (2.3).960 (.4).090 (27.7). (30.7).340 (34.0).460 (37.).590 (40.4).450 (.4).570 (4.5).680 (7.3).80 (.6).930 (23.6).060 (26.9).80 (30.0).30 (33.3).870 (.).870 (.).870 (.).870 (.).060 (26.9).80 (30.0).6 (4.).680 (42.7) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-9
onduit & ccessories M758/3 dapter for onnectors with S85049 ig 4 ccessory Interface M758/3-6-08-0- onduit ode (See Table I) Material Designator: = luminum = rass = RS onnector Dash Number (See Table II) Style Designator S85049 ig 4 M Thread (Ref) J.2 (3.0) Min.06 (.5) Min L Y Dia Dia (Ref) K Dia Nut oupling Holes for.0 Dia Safety Wire (3 Req'd) ody STYL 0 OR US WHN DIMTR IS RTR THN K DIMTR Thread Straight Knurl (Medium oarse) (3 Places) Straight Knurl (Medium oarse) STYL 02 SM S STYL 0 XPT Y DIMNSION IS LSS THN J. STYL 02 IS USD WHN TH XTR WORKIN ROOM PROVIDD Y DIMNSION J O STYL 0 IS NOT RQUIRMNT. S85049 ig 4 Design Standard pplies M Thread (Ref).38 (9.7) ±.03 (.8).25 (6.4) Dia Dia (Ref) K Dia N Dia Nut oupling Thread Holes for.0 Dia Safety Wire (3 Req'd).25 (6.4) Straight Knurl (Medium oarse) (2 Places) STYL 03 OR US WHN DIMTR IS QUL TO OR LSS THN K DIMTR 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
M758/3 dapter for onnectors with S85049 ig 4 ccessory Interface onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5).687 (7.4).82 (.6).937 (23.8).062 (27.0).87 (30.).500 (38.).82 (46.0) 2.25 (54.0) 2.625 (66.7) 3.25 (79.4) 3.625 (92.) onn. Dash No. 03 08 0 2 4 6 8 40 44 48 6 NS 599 & MIL-DTL- 83723 (Series & 3) 08 0 2 4 6 8 TL II (onnector Dash Numbers & itting Dimensions) MIL-DTL- 505 (MS3400 Series) 8SL 0S, 0SL 2, 2S 4, 4S 6, 6S 8 40 44 48 MIL-DTL- 8703 (Navy) (Series 3) 03 07 2 9 27 37 6 MIL-DTL- 26482 (Series 2) Dia.. 08.669 (7.0) 0.67 (5.7) 2.734 (8.6) 3.858 (2.8) 6.984 (25.0) 8.2 (.2). (30.9).345 (34.2).468 (37.3).593 (40.5).969 (50.0) 2.29 (56.4) 2.469 (62.7) 2.79 (69.) 2.969 (75.4) 3.29 (8.8).653 (42.0) M Thread (lass 2) (Ref.) (Note 3) 0.563 - UN 0.500 - UN 0.625 - UN 0.750 - UN 0.875 - UN.000 - UN.062-8 UN.88-8 UN. - 8 UN.438-8 UN.750-8 UN 2.000-8 UNS 2.250-6 UN 2.500-6 UN 2.750-6 UN 3.000-6 UN.500-8 UN Dia. (Ref) Note 3.270 (6.9).270 (6.9).375 (9.5).5 (3.0).585 (4.9).70 (8.0).789 (.0).94 (23.2).039 (26.4).54 (29.3).389 (35.3).635 (4.5).850 (47.0) 2.065 (52.5) 2.3 (58.9) 2.570 (65.3).94 (30.3) J (Style 0) ±.03 (.8).060 (26.9).060 (26.9).060 (26.9).060 (26.9).060 (26.9).060 (26.9). (.4).380 (35.).830 (46.5).830 (46.5) 2.300 (58.4) 2.550 (64.8) 2.800 (7.) 3.050 (77.5) 3.550 (90.2) 3.6 (9.9).880 (47.8) Y (Style 02) ±.03 (.8).6 (5.7).6 (5.7).690 (7.5).690 (7.5).750 (9.).750 (9.).750 (9.).80 (.6).80 (.6).80 (.6).880 (.4).880 (.4).880 (.4).940 (23.9).940 (23.9).940 (23.9).80 (.6). The M758/3 adapter couples connectors listed in Table I to M758/2, M758/3 or M758/4 conduit fittings. 2. The coupling nut end of this adapter shall conform to Military Standard MS355 (Navy), "onnector, electric, rear accessory design standard". S85049 ig 4 takes precedence over this specification. 3. The diameter and M-thread of this drawing are the same as the diameter and M-thread of MS355, and are included for reference purposes. 4. Metric dimensions (mm) are indicated in parentheses. 5. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-2
onduit & ccessories M758/4 dapter for MIL--840 () ackshells M758/4-6-0-0- onduit ode (See Table I) ode (See Table II) Material Designator: = luminum = rass = RS Style Designator.53 (3.5) ±.00 (.3).25 (3.2) Ref. L.25 (3.2) Ref. L.53 (3.5) ±.00 (.3) D Dia K Dia D Dia Dia K Dia N Dia Straight Knurl (Medium oarse) Thread Ref. Thread Straight Knurl (Medium oarse) STYL 0 OR US WHN K DIMTR IS SMLLR THN DIMTR STYL 02 OR US WHN K DIMTR IS QUL TO OR LRR THN DIMTR. The M758/4 adapter provides a non-environmental coupling between certain MIL--840 () backshells and the M758/2, M758/3 or M758/4 fittings, specifically, the -thread of this adapter mates with the V-thread of the M840/6 backshell (straight), the M840/8 backshell (90 o ), or the M840/9 backshell (45 o ). 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
M758/4 dapter for MIL--840 () ackshells onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5).687 (7.4).82 (.6).937 (23.8).062 (27.0).87 (30.).500 (38.).82 (46.0) 2.25 (54.0) 2.625 (66.7) 3.25 (79.4) 3.625 (92.) Thread ode 0 02 03 04 05 06 07 08 09 0 2 3 4 5 TL II ( ode and dapter Dimensions) (Ref.) Thread (lass 2) D Dia ±.05 (.4),, D,, D, D,,,,, H, H, J J, D,, D,,, D,,,,, H, H, J J 0.625 - UN 0.750 - UN 0.875 - UN.000 - UN.88-8 UN.438-8 UN.750-8 UNS 2.000-8 UNS 2.250-6 UN.25-8 UN.250-8 UN.626-8 UN.875-8 UNS 2.25-6 UN 2.750-6 UN.875 (.2).000 (25.4).25 (.6).250 (3.8).438 (.5).688 (42.9) 2.000 (50.8) 2.250 (57.2) 2.250 (57.2).375 (34.9).500 (38.).875 (47.6) 2.25 (54.0) 2.375 (60.3) 3.000 (76.2) Dia ±.05 (.4).435 (.0).578 (4.7).703 (7.9).8 (2.0).000 (25.4).250 (3.8).562 (39.7).83 (46.) 2.062 (52.4).938 (23.8).078 (27.4).438 (.5).688 (42.9).938 (49.2) 2.563 (65.) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-23
onduit & ccessories M758/5 dapter for MIL--235 Stuffing Tubes M758/5--04- Stuffing Tube ode onduit ode Material Designator: = luminum = rass = RS P H L Dia K Dia Q J Thread. The M758/5 adapter couples MIL-S-235/9 through MIL-S-235/7 stuffing tubes to M758/2, M758/3, or M758/4 fittings. 2. ny combination of conduit and stuffing tube sizes may be used by identifying the appropriate conduit size and stuffing tube size in the part number configuration. 3. Metric dimensions (mm) are indicated in parentheses. 4. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
M758/5 dapter for MIL--235 Stuffing Tubes onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) MIL--235 Stuffing Tube D J K L M N P R S T V W X Y Z onduit ode 03 04 04,05,06 06 06 08 08 0 0 0 0,2 2 6 6 6 6 6 6,, Thread (lass 2) 0.875-2 UN.000-2 UN.25-2 UN.250-2 UN.250-2 UN.33-2 UN.500-2 UN.625-2 UN.750-2 UN.83-2 UN 2.000-2 UN 2.063-2 UN 2.88-2 UN 2.33-2 UN 2.688-2 UN 2.875-2 UN 3.000-2 UN 3.25-2 UN 3.250-2 UN 3.375-2 UN 3.563-2 UN 3.750-2 UN 4.000-2 UN Dia.406 (0.3).55 (3.).640 (6.3).750 (9.).82 (.6).843 (2.4).935 (23.7).062 (27.0).7 (29.7).265 (.).406 (35.7).55 (38.5).625 (4.3).750 (44.5).875 (47.6) 2.062 (52.4) 2.87 (55.5) 2. (58.7) 2.500 (63.5) 2.609 (66.3) 2.78 (70.6) 2.875 (73.0) 3.57 (80.2) TL II H ±.02 (.5).063 (27.0).063 (27.0).063 (27.0).063 (27.0).063 (27.0).88 (30.2).88 (30.2).88 (30.2).500 (38.).500 (38.).500 (38.).563 (39.7).563 (39.7).563 (39.7) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 2.88 (55.6) 3.25 (79.4) 3.25 (79.4) J ±.02 (.5).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).33 (8.0).33 (8.0).33 (8.0).33 (8.0).33 (8.0).33 (8.0).33 (8.0).438 (.).438 (.) P Dim (Minimum).03 (26.2).25 (.6).250 (3.8).375 (34.9).375 (34.9).438 (.5).656 (42.).78 (45.2).875 (47.6).938 (49.2) 2.88 (55.6) 2.250 (57.2) 2.344 (59.5) 2.469 (62.7) 2.83 (7.5) 2.969 (75.4) 3.094 (78.6) 3. (83.3) 3.438 (87.3) 3.563 (90.5) 3.750 (95.3) 3.875 (98.4) 4.25 (04.8) Q ±.02 (.5).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8).88 (4.8) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-25
onduit & ccessories M758/6 dapter for Miscellaneous ittings M758/6-6-04- onduit ode (See Table I) Material Designator: = luminum = rass = RS -Thread ode (See Table II) P H L D Dia K Dia.25 (3.2).438 (.) Thread. The M758/6 adapter couples miscellaneous fittings to M758/2, M758/3, or M758/4 fittings. 2. The merican National Thread Series (N) has been superseded by the Unified Thread Series (UN). The series N- thread sizes listed in table II are retained for use with those items which have series N-threads. 3. Metric dimensions (mm) are indicated in parentheses. 4. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-26
M758/6 dapter for Miscellaneous ittings onduit & ccessories onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN TL I L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) Thread ode 0 03 04 06 07 09 0 3 6 9 2 TL II ( ode and dapter Dimensions) Thread (lass 2) D Dia ±.005 (.4) H Dim. ±.02 (.5).25-4 N.8-4N 0.750-4 NPSM.000 - /2 NPSM.250 - /2 NPSM.250 - /2 NPSM 2.025 - /2 N 2.250 - /2 N 2.500-8 NPSM 3.000-8 NPSM.500 - /2 NPSM 2.000 - /2 NPSM.500 (2.7).750 (9.).750 (9.).000 (25.4).000 (25.4).80 (30.0).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5).500 (38.) 2.000 (50.8).250 (3.8).250 (3.8).250 (3.8).250 (3.8).250 (3.8).250 (3.8).560 (39.6).690 (42.9) 2.000 (50.8) 2.060 (52.3).250 (3.8).250 (3.8) p Dim. Min..250 (3.8).430 (.3).370 (34.8).680 (42.7).80 (46.0).80 (46.0) 2.80 (55.4) 2.500 (63.5) 3.000 (76.2) 3.6 (9.9) 2.500 (63.5) 3.000 (76.2) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-27
onduit & ccessories M758/7 dapter for Tapered Pipe Thread M758/7-6- onduit ode (See Table I) Material Designator: = luminum = rass = RS L P K Dia, xt NPT Thread. (7.9) onduit ode 02 03 04 05 06 08 0 2 6 Thread 0.250-8.00 NPT 0.375-8.00 NPT 0.500-4.00 NPT 0.750-4.00 NPT 0.750-4.00 NPT.000 -.50 NPT.250 -.50 NPT.500 -.50 NPT 2.000 -.50 NPT 2.500-8.00 NPT 3.000-8.00 NPT P Dia (Minimum).690 (7.5).80 (.6).000 (25.4).80 (30.0).80 (30.0).500 (38.).80 (46.0) 2. (53.8) 2.6 (66.5) 3.000 (76.2) 3.6 (9.9) TL I Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2). The M758/7 adapter couples any fittings having a female tapered pipe thread to M758/2, M758/3, or M758/4 fittings. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
M758/8 dapter for Straight Pipe Thread onduit & ccessories M758/8-6- onduit ode (See Table I) Material Designator: = luminum = rass = RS P L K Dia, NPSM.2 (3.0). (7.9) Thread onduit ode 02 03 04 05 06 08 0 2 6 Pipe Thread 0.250-8.00 NPSM 0.375-8.00 NPSM 0.500-4.00 NPSM 0.750-4.00 NPSM 0.750-4.00 NPSM.000 -.50 NPSM.250 -.50 NPSM.500 -.50 NPSM 2.000 -.50 NPSM 2.500-8.00 NPSM 3.000-8.00 NPSM Dim. ±.02 (.5).750 (9.).750 (9.).870 (.).870 (.).870 (.).870 (.).870 (.).000 (25.4).90 (30.2).6 (4.).690 (42.9) TL I P Dia (Minimum).690 (7.5).80 (.6).000 (25.4).80 (30.0).80 (30.0).500 (38.).80 (46.0) 2. (53.8) 2.6 (66.5) 3.000 (76.2) 3.6 (9.9) Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2). The M758/8 adapter couples any fittings having a female straight pipe thread to M758/2, M758/3, or M758/4 fittings. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-29
onduit & ccessories M758/9 dapter for Panel Termination M758/9-6- onduit ode (See Table I) Material Designator: = luminum = rass = RS.6875 (7.5).875 (4.8) L P Dia K Dia Nuts (2).25 (6.4) Ref. Thread Straight Knurl, Medium oarse, 3 Places onduit ode 02 03 04 05 06 08 0 2 6 Thread (lass 2) 0.625 - UN 0.750 - UN 0.875 - UN.000 - UN.88-8 UN.438-8 UN.750-6 UN 2.000-6 UN 2.500-6 UN 3.000-6 UN 3.500-6 UN P Dia Min..870 (.).000 (25.4). (.4).250 (3.8).430 (.3).680 (42.7) 2.000 (50.8) 2.250 (57.2) 3.000 (76.2) 3.500 (88.9) 4.000 (0.6) TL I Thread (lass 2) 0.438 - UN 0.563 - UN 0.688 - UN 0.83 - UN 0.938 - UN.250-8 UN.563-8 UN.875-6 UN 2.375-6 UN 2.875-6 UN 3.375-6 UN L ±.02 (.5). (5.3).30 (7.9).30 (7.9).370 (9.4).370 (9.4).430 (0.9).430 (0.9).430 (0.9).430 (0.9) K Dia Min..370 (9.4).500 (2.7).6 (5.7).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2). The M758/9 adapter provides the capability of terminating a M758/2, M758/3, or M758/4 fitting to a panel. 2. Metric dimensions (mm) are indicated in parentheses. 3. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-30
M840/4 Metal ore onduit for MI Shielding onduit & ccessories M840/4-0- onduit ode Type Designator: = Plain = Insulator Jacket Material Designator = rass onduit with Low Phospherous ronze Wire raid and Neoprene Jacket = Nickel-Iron onduit with Tinned oated opper raid and Neoprene Jacket Neoprene Jacket raid onduit Nominal onduit I.D. Dia Order Length (s Specified In eet) 50 t.. onduit ode 03 04 05 06 08 0 2 6 TL I Nominal onduit I.D..375 (9.5).500 (2.7).625 (5.9).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) Dia ±.00 (.3).525 (3.3).650 (6.5).765 (9.4).925 (23.5). (30.7).455 (37.0).725 (43.8) 2.0 (55.9). Metric dimensions (mm) are indicated in parentheses. 2. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-3
onduit & ccessories M840/5 Metal onduit ackshell lenair onnector Designator MIL--840 Dash No. M840/5 6 W Style Designator: = MI/Non-nvironmental = MI/nvironmental Material and inish W = luminum, admium Plate, Olive Drab over lectroless Nickel D = RS, admium Plate, lack D.50 (2.7) able Range STYL - MI/Non-nvironmental (Plain onduit) D O-Rings.75 (44.5) able Range STYL - MI/nvironmental (Jacket onduit) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
M840/5 Metal onduit ackshell onduit & ccessories () (3) (5) D (7) (9) (23) (25) H (29) J (33) TL I lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS Dia.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2) Dash No. 0 02 03 04 05 06 07 08 09 0 2 3 4 5 6 7 8 9 2 23 25 Desig. () (3) (3) (5) (5) (5) (5) D (7) D (7) D (7) (9) (9) (9) (23) (23) (23) (25) (25) (25) (25) H (29) H (29) J (33) J (33) () D Dia ±.2 (3.).75 (44.5).75 (44.5).75 (44.5).75 (44.5).75 (44.5).75 (44.5) 3.00 (76.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.75 (69.9) 2.75 (69.9) 3.50 (88.9) 2.75 (69.9) 2.75 (69.9) 2.75 (69.9) 4.00 (0.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6).75 (44.5) TL II Dia.2 (.4).2 (.4).25 (3.8).2 (.4).25 (3.8).43 (.3).62 (4.).43 (.3).62 (4.).8 (46.0).43 (.3).62 (4.).8 (46.0).62 (4.).8 (46.0) 2.8 (55.4).62 (4.).8 (46.0) 2.8 (55.4) 2.56 (65.0) 2.8 (55.4) 2.55 (64.8) 2.56 (65.0) 3.06 (77.7).25 (3.8) Dia.9 (30.2).9 (30.2).38 (35.).9 (30.2).38 (35.).63 (4.4).94 (49.3).63 (4.4).94 (49.3) 2.9 (55.6).63 (4.4).94 (49.3) 2.9 (55.6).94 (49.3) 2.9 (55.6) 2.44 (62.0).94 (49.3) 2.9 (55.6) 2.44 (62.0) 2.69 (68.3) 2.44 (62.0) 2.69 (68.3) 2.69 (68.3) 3.9 (8.0).38 (35.) Min.50 (2.7).50 (2.7).63 (6.0).50 (2.7).63 (6.0).75 (9.).88 (.4).75 (9.).88 (.4).9 (30.2).75 (9.).88 (.4).9 (30.2).88 (.4).9 (30.2).44 (.6).88 (.4).9 (30.2).44 (.6).63 (4.4).44 (.6).63 (4.4).63 (4.4) 2.3 (54.).63 (6.0) able Range.63 (6.0).63 (6.0).75 (9.).63 (6.0).75 (9.).88 (.4).00 (25.4).88 (.4).00 (25.4).38 (35.).88 (.4).00 (25.4).38 (35.).00 (25.4).38 (35.).63 (4.4).00 (25.4).38 (35.).63 (4.4).88 (47.8).63 (4.4).88 (47.8).88 (47.8) 2.38 (60.5).75 (9.). Metric dimensions (mm) are indicated in parentheses. 2. or complete dimensions see applicable Military Specification. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-33
onduit comes in all shapes and sizes (and materials). nd nobody offers a broader range of options than lenair. rom the interconnection of laboratory. test equipment to above-deck shipboard use, our plastic convoluted tubing and metal-core conduit provide outstanding wiring protection and shielding. We ve designed our product line to satisfy virtually every application specification by offering the widest range of materials in the industry: PT, Tefzel, P, P, Kynar, PK, brass, nickel-iron, and stainless steel - with overbraided shielding in tin copper, nickel copper, racon, phosphorous bronze, stainless steel, Halar, Nomex, Dacron, and Kevlar. nnular & helical convoluted tubing Metal-core conduit & a full range of shields & jackets Metal or composite fittings and transitions User-serviceable conduit systems MIL--758 fittings and adapters omplete custom-designed conduit assemblies 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany Scandinavia rance Italy Spain
M840/ Metal onduit ushing onduit & ccessories M840/-S 0 Dash No. (See Table I) Material Designator S = orrosion Resistant Steel Passivate per QQ-P-35.50 (38.) ±.03 (.8) D Dia Dia Dia Dia 03 04 05 06 08 0 2 6 M840/4 Ref. 03 04 05 06 08 0 2 6 Dia +.0 (.5) -.000 (.0).375 (9.5).500 (2.7).625 (5.9).750 (9.).000 (25.4).250 (3.8).500 (38.) 2.000 (50.8) TL I Dia +.005 (.2) -.000 (.0).540 (3.7).665 (6.9).780 (9.8).940 (23.9).5 (3.).470 (37.3).740 (44.2) 2.25 (56.3) Dia +.000 (.0) -.005 (.2).625 (5.9).750 (9.).875 (.2).000 (25.4).375 (34.9).625 (4.3).875 (47.6) 2.375 (60.3) D +.000 (.0) -.005 (.2).525 (3.3).650 (6.5).775 (9.7).900 (.9).275 (.4).525 (38.7).775 (45.) 2.275 (57.8). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-35
onduit & ccessories M840/25 MI dapters for M840 onnectors lenair onnector Designator MIL--840 Dash No. (Table I) M840/25 6 W Style Designator: = MI/Non-nvironmental = MI/nvironmental Material and inish W = luminum, admium Plate, Olive Drab over lectroless Nickel D = RS, admium Plate, lack D D able Range.50 (2.7).75 (44.5) STYL - MI/Non-nvironmental (Plain onduit) able Range STYL - MI/nvironmental (Jacket onduit). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-
M840/25 MI dapters for M840 onnectors onduit & ccessories TL I Dash No. (Table II) D Dim Dim Dia 2 3 4 5 6 7 8 9 0 2 3 3 5 5 5 5 7 7 7 9 9 2. (59.9) 2. (59.9) 2. (59.9) 2.56 (65.0) 2.56 (65.0) 2.56 (65.0) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 3.50 3.50 3.50 3.69 3.69 3.69 3.8 3.8 3.8 3.8 3.8 3.8 (88.9) (88.9) (88.9) (93.7) (93.7) (93.7) (96.8) (96.8) (96.8) (96.8) (96.8) (96.8).2 (.4).2 (.4).25 (3.8).2 (.4).25 (3.8).43 (.3).62 (4.).43 (.3).62 (4.).8 (46.0).43 (.3).62 (4.) 3 4 5 6 7 8 9 2 23 9 23 23 23 25 25 25 25 29 29 33 33 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.33 (84.6) 3.33 (84.6) 3.33 (84.6) 3.70 (94.0) 3.70 (94.0) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.50 (4.3) 4.50 (4.3) 4.50 (4.3) 4.83 (.7) 4.83 (.7).8 (46.0).62 (4.).8 (46.0) 2.8 (55.4).62 (4.).8 (46.0) 2.8 (55.4) 2.56 (65.0) 2.8 (55.4) 2.56 (65.0) 2.56 (65.0) 3.06 (77.7) 25 2. (59.9) 3.50 (88.9).25 (3.8) * onduit of M840/4 onduit (Page 7-3) Dia.9 (30.2).9 (30.2).38 (35.).9 (30.2).38 (35.).63 (4.4).94 (49.3).63 (4.4).94 (49.3) 2.9 (55.6).63 (4.4).94 (49.3) 2.9 (55.6).94 (49.3) 2.9 (55.6) 2.44 (62.0).94 (49.3) 2.9 (55.6) 2.44 (62.0) 2.69 (68.3) 2.44 (62.0) 2.69 (68.3) 2.69 (68.3) 3.9 (8.0).38 (35.).63 (6.0).63 (6.0).75 (9.).63 (6.0).75 (9.).88 (.4).00 (25.4).88 (.4).00 (25.4).38 (35.).88 (.4).00 (25.4).38 (35.).00 (25.4).38 (35.).63 (4.4).00 (25.4).38 (35.).63 (4.4).88 (47.8).63 (4.4).88 (47.8).88 (47.8) 2.38 (60.5).75 (9.) able Range onduit Min *.50 (2.7) 03.50 (2.7) 03.63 (6.0) 04.50 (2.7) 03.63 (6.0) 04.75 (9.) 05.88 (.4) 06.75 (9.) 05.88 (.4) 06.9 (30.2) 08.75 (9.) 05.88 (.4) 06.9 (30.2) 08.88 (.4) 06.9 (30.2) 08.44 (.6) 0.88 (.4) 06.9 (30.2) 08.44 (.6) 0.63 (4.4) 2.44 (.6) 0.63 (4.4) 2.63 (4.4) 2 2.3 (54.) 6.63 (6.0) 04 3 5 7 9 23 25 29 33 TL II lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS Dia.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2) 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-37
onduit & ccessories M840/27 MI dapters for M840 onnectors lenair onnector Designator MIL--840 Dash No. (Table I) M840/27 6 W Style Designator: = MI/Non-nvironmental = MI/nvironmental Material and inish W = luminum, admium Plate, Olive Drab over lectroless Nickel D = RS, admium Plate, lack D STYL - MI/Non-nvironmental (Plain onduit).50 (2.7) able Range D STYL - MI/nvironmental (Jacket onduit).75 (44.5) able Range 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-38
M840/27 MI dapters for M840 onnectors onduit & ccessories Dash No. 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 2 23 25 (Table II) 3 3 5 5 5 5 7 7 7 9 9 9 23 23 23 25 25 25 25 29 29 33 33 D Dim 2. (59.9) 2. (59.9) 2. (59.9) 2.56 (65.0) 2.56 (65.0) 2.56 (65.0) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 2.67 (67.8) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.05 (77.5) 3.33 (84.6) 3.33 (84.6) 3.33 (84.6) 3.70 (94.0) 3.70 (94.0) 2. (59.9) Dim 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.69 (93.7) 3.69 (93.7) 3.69 (93.7) 3.8 (96.8) 3.8 (96.8) 3.8 (96.8) 3.8 (96.8) 3.8 (96.8) 3.8 (96.8) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.9 (06.4) 4.50 (4.3) 4.50 (4.3) 4.50 (4.3) 4.83 (.7) 4.83 (.7) 3.50 (88.9) * onduit of M840/4 onduit (Page 7-3) TL I Dia.2 (.4).2 (.4).25 (3.8).2 (.4).25 (3.8).43 (.3).62 (4.).43 (.3).62 (4.).8 (46.0).43 (.3).62 (4.).8 (46.0).62 (4.).8 (46.0) 2.8 (55.4).62 (4.).8 (46.0) 2.8 (55.4) 2.56 (65.0) 2.8 (55.4) 2.56 (65.0) 2.56 (65.0) 3.06 (77.7).25 (3.8) Dia.9 (30.2).9 (30.2).38 (35.).9 (30.2).38 (35.).63 (4.4).94 (49.3).63 (4.4).94 (49.3) 2.9 (55.6).63 (4.4).94 (49.3) 2.9 (55.6).94 (49.3) 2.9 (55.6) 2.44 (62.0).94 (49.3) 2.9 (55.6) 2.44 (62.0) 2.69 (68.3) 2.44 (62.0) 2.69 (68.3) 2.69 (68.3) 3.9 (8.0).38 (35.).63 (6.0).63 (6.0).75 (9.).63 (6.0).75 (9.).88 (.4).00 (25.4).88 (.4).00 (25.4).38 (35.).88 (.4).00 (25.4).38 (35.).00 (25.4).38 (35.).63 (4.4).00 (25.4).38 (35.).63 (4.4).88 (47.8).63 (4.4).88 (47.8).88 (47.8) 2.38 (60.5).75 (9.) able Range Min.50 (2.7).50 (2.7).63 (6.0).50 (2.7).63 (6.0).75 (9.).88 (.4).75 (9.).88 (.4).9 (30.2).75 (9.).88 (.4).9 (30.2).88 (.4).9 (30.2).44 (.6).88 (.4).9 (30.2).44 (.6).63 (4.4).44 (.6).63 (4.4).63 (4.4) 2.3 (54.).63 (6.0) onduit * 03 03 04 03 04 05 06 05 06 08 05 06 08 06 08 0 06 08 0 2 0 2 2 6 04 3 5 7 9 23 25 29 33 TL II lass 2.750 - UN.875 - UN.000 - UN.25-8 UN.250-8 UN.438-8 UN.562-8 UN.875-6 UN 2.062-6 UNS Dia.0 (26.).4 (29.0).263 (.).387 (35.2).53 (38.4).703 (43.3).825 (46.4) 2.43 (54.4) 2.9 (59.2). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-39
onduit & ccessories M840/30 Metal onduit oupling MIL--840 M840/30-6 W Dash No. Style Designator: = MI/Non-nvironmental = MI/nvironmental Material and inish W = luminum, admium Plate, Olive Drab over lectroless Nickel D = RS, admium Plate, lack O-Ring 2.375 (60.3).50 (2.7) STYL MI/Non-nvironmental (Plain onduit) able Range D.75 (44.5) 2.375 (60.3) O-Ring STYL MI/nvironmental (Jacket onduit) able Range D Dash No./ onduit 03 04 05 06 08 0 2 6 D Dia.2 (.4).25 (3.8).43 (.3).62 (4.).8 (46.0) 2.8 (55.4) 2.56 (65.0) 3.06 (77.7) TL I Dia.9 (30.2).38 (35.).63 (4.4).94 (49.3) 2.9 (55.6) 2.44 (62.0) 2.69 (68.3) 3.9 (8.0).63 (6.0).75 (9.).88 (.4).00 (25.4).38 (35.).63 (4.4).88 (47.8) 2.38 (60.5) able Range Min.50 (2.7).63 (6.0).75 (9.).88 (.4).9 (30.2).44 (.6).63 (4.4) 2.3 (54.). or complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-40
R00 ND RP00 Series ittings onduit & ccessories lenair is qualified for the following R00 and RP00 series fittings. onsult factory for drawings and specifications. NVS HNDOOK S9407--HK-00 R2-X-XX-MXX-XX R-XXSM R2-XXXSM (Style ) R2-XXXSM (Style ) R3-X-XX-MXX R2-X-MXX-XX R5-X-MXX-XX R6-MXX R7-MXX R8-MXX R9-MXX RP0-MXX-T(S) Telescoping/Short RP-MXX-T(S) Telescoping/Short RP2-MXX-T(S) Telescoping/Short RP230-MXX RP0-MXX RP-MXX RP20-MXX RP2-MXX RP23-XX-XX-XXSM RP2-XX-XXSM RP2330-XX-XX-N (No Letter Steel) SM RP2340-XX-XX-XXSM RP2350-XX-XX-XX-XSM RP20-XX-XX-XXSM RP00-XX-XXSM RP-XX-XXSM RP-XX-XXSM RP30-XXSM RP3-XXSM RP40-XXSM RP2500-XXSM RP260-XXSM RP26-XXSM SM = lectroless Nickel Plating/Mild Steel NVS HNDOOK 0967-LP-3-500 R2-X-X-X-XXSN R-XXSN R2-XXXSN (Style ) R2-XXXSN (Style ) R3-X-X-XXSN R2-X-X-XXSN R5-X-X-XXSN R6-XX R7-XX R8-XXSM R9-XX RP0-XX-T(S) RP-XX-T(S) RP2-XX-T(S) RP230-XX RP0-XX RP-XX RP20-XX RP2-XX RP23-XX-XX-XXSN RP2-XX-XXSN RP2330-XX-XX-N (No Letter Steel) SN RP2340-XX-XX-XXSN RP2350-XX-XX-XX-XSN RP20-XX-XX-XXSN RP00-XX-XXSN RP-XX-XXSN RP-XX-XXSN RP30-XXSN RP3-XXSN RP40-XXSN RP2500-XXSN RP260-XXSN RP26-XXSN SN = admium over lectroless Nickel/Mild Steel 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 7-4
very Picture Tells a Story This One Speaks Volumes lenair is in the business of solving even the most complex interconnect design problems. That's why we've built our conduit product line to take advantage of our forty years of experience in harness assembly and interconnect packaging. We know that your problem isn't solved when the connector and wire are selected. The real work starts with the packaging of the key components for actual use. lenair is ready with wire protection solutions that include plastic convoluted tubing, metal-core conduit, jacketing and metal or fabric overbraiding. We also produce a line of robust composite junction boxes, which add new design options to traditional conduit wire protection assemblies. t lenair, we're ready to go with both the individual technologies, as well as the most innovative and effective packaging solutions available today. Now that's a story worth telling. 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 Mail: sales@glenair.com United States United Kingdom ermany N o r d i c rance S p a i n Italy
Index : Part Number Index Introduction Part Number Index Please Note: S erospace has assumed control of the M85049 specification for cylindrical connector backshells and accessories. ll existing M85049 specification documents referenced in this index are now supersceded by the new S85049 standard. or convenience in ordering however, basic part numbering for these components still utilize the familiar M85049 prefix. Several new specification slash sheets have been added to this index since the last published version. The following new products will be available just as soon as the formal S qualification process is completed. S85049/03 S85049/04 S85049/05 S85049/09 S85049/ S85049/2 S85049/4 S85049/5 S85049/7 S85049/8 S85049/ S85049/2 S85049/23 S85049/ S85049/26 S85049/27 S85049/ S85049/30 S85049/3 S85049/ S85049/33 Straight, omposite, Strain-Relief MI/RI ackshell 45, omposite, Strain-Relief MI/RI ackshell 90, omposite, Strain-Relief MI/RI ackshell Straight, MI/RI Shield Sock S5049 ig. 4 90, MI/RI Shield Sock S5049 ig. 4 Straight, MI/RI Shield Sock S5049 ig. 2 90, MI/RI Shield Sock S5049 ig. 2 Straight, MI/RI Shield Sock S5049 ig. 3 90, MI/RI Shield Sock S5049 ig. 3 Straight, Strain-Relief, ull-radius ntry S5049 ig. 4 90, Strain-Relief, ull-radius ntry S5049 ig. 4 Straight, Strain-Relief, ull-radius ntry S5049 ig. 2 90, Strain-Relief, ull-radius ntry S5049 ig. 2 Straight, Strain-Relief, ull-radius ntry S5049 ig. 3 90, Strain-Relief, ull-radius ntry S5049 ig. 3 ushing Strip for S85049 lamps and, Shield Termination Square lange asket Straight, iber Optic ackshell for S5590/ onnector 45, iber Optic ackshell for S5590/ onnector 90, iber Optic ackshell for S5590/ onnector 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992 -
Part Number Index Part Number Index lenair s Military Superceeding ommercial onnector Interface or Page Specification Part Number atalog P/N Description Designator (elow) No. P00 ** NVS Series P00 ittings 7-4 RP00 ** NVS Series RP00 ittings 7-4 MS3057 M85049/4 6-053 Style Str. Strain Relief **** 62-3 MS3057 M85049/ 6-053 Style Str. Strain Relief **** 62-9 MS3057 M85049/2 6-053 Style Str. Strain Relief **** 62-0 MS3057D M85049/42 6-053 Style H Str. Strain Relief **** 62-4 MS305 650S00 Stowage Receptacle MIL-DTL-505 65-2 MS35 650DS00 Stowage Receptacle MIL-DTL26482 65-3 MS352 M85049/53 450S00 Str. Qwik-Ty Strain Relief 45-4* MS353 M85049/54 45000 45 Qwik-Ty Strain Relief 45-4* MS354 M85049/55 45000 90 Qwik-Ty Strain Relief 45-4* MS358 M85049/60-30S00 Shrink oot dapter 3-4 MS380 660-008 Protective over, Plug MIL-DTL-26482 66-2 MS38 660-009 Protective over, Recept. MIL-DTL-26482 66-2 MS384 M85049/34 ** dapter D -3* MS386 ** Jam Nut Various 68-2 MS388 M85049/8 39000 90 MI/RI nvironmental ackshell 39-0 MS388 M85049/9 37000 90 nvironmental ackshell 37- MS388 M85049/ 38000 90 MI/RI Non-nvironmental ackshell 38-8 MS389 M85049/6 39000 45 MI/RI nvironmental ackshell 39-8 MS389 M85049/7 37000 45 nvironmental ackshell 37- MS389 M85049/23 38000 45 MI/RI Non-nvironmental ackshell 38-6 MS345 M85049/43 6047 45 Strain Relief 62-5* MS346 M85049/3 60S0 Nut 6-7 MS346 M85049/60-2 30S002 Shrink oot dapter 3-5 MS347 M85049/52-6S046 Str. Strain Relief 62- MS348 M85049/5-6046 90 Strain Relief 62- MS349 M85049/26-440S063 rimp Ring dapter 44-3 MS34*** ** Telescoping ushing 68-4 MS3437 M85049/0 390S00 Str. MI/RI nvironmental ackshell 39-2 MS3437 M85049/ 370S00 Str. nvironmental ackshell 37- MS3437 M85049/25 380S00 Str. MI/RI Non-nvironmental ackshell 38-0 MS3480 T38 onnector Wrench MIL-DTL-505 & MIL-DTL-83723 Ser. 2 60-2 MS348 T39 onnector Wrench MIL-DTL-26482 Series and 2, MIL--83723 Series I, and NS 599 60-3 MS3482 T6 onnector Wrench MIL--85 Series and 3 60-4 MS7349 660-007 Protective over, Recept. MIL--992 66-3 MS7350 660-006 Protective over, Plug MIL--992 66-3 MS047 MS27502 660-03 Protective over, Recept. MIL-DTL-38999 Series I 66-5* MS048 MS2750 660-02 Protective over, Plug MIL-DTL-38999 Series I 66-5* M758/ ** lexible Weatherproof MI-MP onduit 7-2 M758/2 ** Str. onduit itting for M758/9 thru /9 7-3 M758/3 ** 45 onduit itting for M758/9 thru /9 7-4 M758/4 ** 90 onduit itting for M758/9 thru /9 7-5 M758/5 ** onduit-to-panel itting 7-6 M758/6 ** onduit-to-threaded Pipe itting 7-7 M758/7 ** onduit-to-stuffing Tube 7-8 LND KSHLL ONNTOR DSINTORS * Page Number of Superceeding Part Number ** onsult actory *** Distributed by lenair **** MS V Thread en l Duty nd ell DSI. SP. SRIS MIL-DTL-505 MS3400 MIL-DTL-26482 2 S8703 3 MIL-DTL-83723 I & III 40M39569 D 56-3 N 2997, 46 S 0, LN 29504 N934 H302 PN 64-, -2 DSI. SP. SRIS PTT 602 MIL-DTL-505 MS300 MIL--992 MS73XX D MIL-DTL-26482 MIL-DTL-26500 luminum MIL-DTL-38999 I & II 40M38277 PN 6433- PTT 64 PTT 66 N934 H308, 9 DSI. SP. SRIS MIL--840 H MIL-DTL-38999 III & IV N45 J MIL--85, 2, 3 & 4 V959 K MIL-DTL-83723 II 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-2
Part Number Index Part Number Index lenair s Military Superceeding ommercial onnector Interface or Page Specification Part Number atalog P/N Description Designator (elow) No. M758/8 ** onduit-to-onduit itting 7- M758/9 ** onduit dapter 7-2 M758/0 ** onduit dapter Triaxial onnectors 7-4 M758/ ** onduit dapter oaxial onnectors 7-6 M758/2 ** onduit dapter D 7-8 M758/3 ** onduit dapter 7- M758/4 ** onduit dapter 7- M758/5 ** onduit dapter MIL--235 Stuffing Tube 7- M758/6 ** onduit dapter for Miscellaneous Thread 7-26 M758/7 ** onduit dapter for Tapered Pipe Thread 7- M758/8 ** onduit dapter for Str. Pipe Thread 7-29 M758/9 ** onduit dapter for Panel Termination 7-30 MS25042 660-004 Protective over, Plug MIL-DTL-505 66-4 MS25043 660-005 Protective over, Recept. MIL-DTL-505 66-4 MS2729 6S050 Str. Strain Relief 62-2 MS27292 M83723/59-660-02 Protective over, Plug MIL-DTL-83723 Series III Thd 66-0 MS27293 M83723/59-2 660-09 Protective over, Plug MIL-DTL-83723 Series III ay. 66- MS27294 M83723/60-660-0 Protective over, Recept. MIL-DTL-83723 Series III Thd 66-0 MS27295 M83723/60-2 660-0 Protective over, Recept. MIL-DTL-83723 Series III ay. 66- MS27296 M83723/6-650S00 Stowage Receptacle, Threaded MIL-DTL-26500 Thd and MIL--83723 Series III Thd 65- MS27297 M83723/6-2 650S002 Stowage Receptacle, ayonet MIL-DTL-26500 ay. and MIL-DTL-83723 Series III ay. 65- MS27342-2 M85049/49-2 ** Str. Strain Relief 62-9* MS27352 MS2750 660-04 Protective over, Plug MIL-DTL-38999 Series II 66-6* MS27353 MS275 660-05 Protective over, Recept. MIL-DTL-38999 Series II 66-6* MS27485 M85049/58 ** Potting oot dapter 30-2* MS2750 660-02 Protective over, Plug MIL-DTL-38999 Series I 66-5 MS27502 660-03 Protective over, Recept. MIL-DTL-38999 Series I 66-5 MS27506 M85049/49-2 6S054 Str. Strain Relief 62-9* MS27507 M85049/47 602 90 Strain Relief 62-8 MS2750 660-04 Protective over, Plug MIL-DTL-38999 Series II 66-6 MS275 660-05 Protective over, Recept. MIL-DTL-38999 Series II 66-6 MS2752 MS386 ** Jam Nut MIL-DTL-38999 Series II 68-2* MS2754 MS386 ** Jam Nut MIL-DTL-38999 Series I 68-2* MS27558 ** 90 Strain Relief 62-3 MS27559 ** 90 Strain Relief 62-4 MS27668 M85049/56 450S00 Str. Qwik-Ty Strain Relief 45-5* MS27669 M85049/57 45000 45 Qwik-Ty Strain Relief 45-5* MS27670 M85049/63 45000 90 Qwik-Ty Strain Relief 45-5* MS2774 40-003 Tag Ring 40-2 M840/ 6S05 Str. Strain Relief 62-5 M840/2 605 90 Strain Relief 62-6 M840/3 605 45 Strain Relief 62-7 M840/4 ** lexible Metal ore onduit 7-3 M840/5 ** MI/MP onduit ackshell 7- M840/6 ** Str. MI/RI nvironmental ackshell 39-2 LND * Page Number of Superceeding Part Number ** onsult actory *** Distributed by lenair **** MS V Thread en l Duty nd ell KSHLL ONNTOR DSINTORS DSI. SP. SRIS DSI. SP. SRIS DSI. SP. SRIS MIL-DTL-505 MS3400 PTT 602 MIL--840 MIL-DTL-26482 2 MIL-DTL-505 MS300 H MIL-DTL-38999 III & IV S8703 3 MIL--992 MS73XX N45 MIL-DTL-83723 I & III D MIL-DTL-26482 J MIL--85, 2, 3 & 4 40M39569 MIL-DTL-26500 luminum V959 D 56-3 N 2997, 46 S 0, LN 29504 N934 H302 MIL-DTL-38999 40M38277 PN 6433- PTT 64 PTT 66 I & II K MIL-DTL-83723 II PN 64-, -2 N934 H308, 9 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-3
Part Number Index Part Number Index lenair s Military Superceeding ommercial onnector Interface or Page Specification Part Number atalog P/N Description Designator (elow) No. M840/6 ** Str. nvironmental ackshell 37-2 M840/7 650S00 Stowage Receptacle MIL--840 65-4 M840/8 ** 90 Split MI/RI nvironmental ackshell 39-3 M840/8 ** 90 nvironmental ackshell 37-3 M840/9 ** 45 Split MI/RI nvironmental ackshell 39-4 M840/9 ** 45 nvironmental ackshell 37-4 M840/3 660-00 Protective over, Recept. MIL--840 66-7 M840/5 660-0 Protective over, Plug MIL--840 66-7 M840/ ** onduit ushing 7-35 M840/23 ** Nut 6-2 M840/ ** asket MIL--840 68-5 M840/25 ** 90 MI dapters MIL--840 7- M840/27 ** 45 MI dapters MIL--840 7-38 M840/30 ** onduit Union 7-40 M29504/04 8-002 iber Optic Pin Terminus 68-6 M29504/05 8-00 iber Optic Socket Terminus 68-7 M38999/ M85049/27 60S0 Nut 6-6* M38999/2 M85049/62 30S00 Shrink oot dapter 3-6* M38999/3 M85049/33-2 440S063 rimp Ring dapter 44-4* M38999/4 M85049/30 400-00 Tag Ring dapter 40-3* M38999/5 M85049/7 390S02 Str. MI/RI nvironmental ackshell 39-6* M38999/6 M85049/29 0S002 Non-nv. Strain Relief ackshell -5* M38999/7 M85049/ 380S008 Str. MI/RI Non-nvironmental ackshell 38-4* M38999/8 M85049/37 380D007 90 MI/RI Non-nvironmental ackshell 38-5* M38999/9 650S00 Stowage Receptacle MIL-DTL-38999 Series I 65-5 M38999/0 650S002 Stowage Receptacle MIL-DTL-38999 Series II 65-6 D38999/ 650HS00 Stowage Receptacle MIL-DTL-38999 Series III 65-7 D38999/ ** Jam Nut MIL-DTL-38999 Series III and IV 68-8 D38999/ 660-023 Protective over, Plug, omposite MIL-DTL-38999 Series III 66-8 D38999/33 660-0 Protective over, Recept., omposite MIL-DTL-38999 Series III 66-8 D38999/50 650HS007 Stowage Receptacle MIL-DTL-38999 Series IV 65-8 M85/3 6JS00 Str. Strain Relief J 62-8 M85/4 (,) 390JS02 Str. RI nvironmental J 39-6 M85/4 (,D)380JS008 Str. RI Non-nvironmental ackshell J 38-2 M85/6 60JS02 Nut J 6-3 M85/7 660-07 Protective over, Plug MIL-DTL-85 Series 2 66-9 M85/8 660-08 Protective over, Recept. MIL-DTL-85 Series and 2 66-9 M85/9 650JS002 Stowage Receptacle MIL-DTL-85 Series 2 65-9 M85/29 660-06 Protective over, Plug MIL-DTL-85 Series 66-9 M85/30 650JS00 Stowage Receptacle MIL-DTL-85 Series 65-0 M83538/9 ** dapter MIL-DTL-83538/4-2 M83723/5 M85049/5-6046 90 Strain Relief 62- M83723/5N M85049/3 60S0 Nut 6-7 M83723/5S M85049/52-6S046 Str. Strain Relief 62- M83723/6M M85049/60-2 30S002 Shrink oot dapter 3-5* M83723/27M 30KS002 Shrink oot dapter K 3-2 M83723/35 ** 90 Non-nv. Strain Relief ackshell K -2 LND * Page Number of Superceeding Part Number ** onsult actory *** Distributed by lenair **** MS V Thread en l Duty nd ell KSHLL ONNTOR DSINTORS DSI. SP. SRIS DSI. SP. SRIS DSI. SP. SRIS MIL-DTL-505 MS3400 PTT 602 MIL--840 MIL-DTL-26482 2 MIL-DTL-505 MS300 H MIL-DTL-38999 III & IV S8703 3 MIL--992 MS73XX N45 MIL-DTL-83723 I & III D MIL-DTL-26482 J MIL--85, 2, 3 & 4 40M39569 MIL-DTL-26500 luminum V959 D 56-3 N 2997, 46 S 0, LN 29504 N934 H302 MIL-DTL-38999 40M38277 PN 6433- PTT 64 PTT 66 I & II K MIL-DTL-83723 II PN 64-, -2 N934 H308, 9 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-4
Part Number Index Part Number Index lenair s Military Superceeding ommercial onnector Interface or Page Specification Part Number atalog P/N Description Designator (elow) No. M83723/35N ** Nut K 6-4 M83723/35S ** Non-nvironmental Strain Relief ackshell K -3 M83723/44 MS38 660-009 Protective over, Recept. MIL-DTL-26482 66-2* M83723/45 MS35 650DS00 Stowage Receptacle MIL-DTL-26482 65-3* M83723/46 MS380 660-008 Protective over, Plug MIL-DTL-26482 66-2* M83723/50 ** 90 Qwik-Ty Strain Relief K 45-2 M83723/50 ** 45 Qwik-Ty Strain Relief K 45-2 M83723/50R ** Str. Qwik-Ty Strain Relief K 45-2 M83723/59-660-02 Protective over, Plug MIL-DTL-83723 Series III Thd 66-0 M83723/59-2 660-09 Protective over, Plug MIL-DTL-83723 Series III ay. 66- M83723/60-660-0 Protective over, Recept. MIL-DTL-83723 Series III Thd 66-0 M83723/60-2 660-0 Protective over, Recept. MIL-DTL-83723 Series III ay. 66- M83723/6-650S00 Stowage Receptacle, Threaded MIL-DTL-26500 Thd and MIL-DTL-83723 Series III Thd 65- M83723/6-2 650S002 Stowage Receptacle, ayonet MIL-DTL-26500 ay. and MIL-DTL-83723 Series III ay. 65- M83723/70 ** Receptacle dapter MIL-DTL-83723 Series III 68-9 M83733/5 M85049/ ** MI Rectangular ackshell MIL-DTL-83733 50-2 M83733/6 M85049/44 ** Rectangular Strain Relief ackshell MIL-DTL-83733 50-3 S85049/ 6-053 Style Strain Relief **** 62-9 S85049/2 6-053 Style Strain Relief **** 62-0 S85049/3 ** Str. nvironmental ackshell 37-5 S85049/3 2 ** Str. nvironmental ackshell 37-6 S85049/3 3 ** Str. nvironmental ackshell 37-7 S85049/4 ** Str. nvironmental ackshell 37-8 S85049/4 2 ** Str. nvironmental ackshell 37-0 S85049/4 3 ** Str. nvironmental ackshell 37-2 S85049/5 ** Str. nvironmental ackshell 37-4 S85049/5 2 ** Str. nvironmental ackshell 37-6 S85049/5 3 ** Str. nvironmental ackshell 37-8 S85049/6 39000 45 MI/RI nvironmental ackshell 39-8 S85049/7 37000 45 nvironmental ackshell 37- S85049/8 39000 90 MI/RI nvironmental ackshell 39-0 S85049/9 37000 90 nvironmental ackshell 37- S85049/0 390S00 Str. MI/RI nvironmental ackshell 39-2 S85049/ 370S00 Str. nvironmental ackshell 37- S85049/4S ** Nut, Self Locking H 6-5 S85049/5 ** 45 Qwik-Ty Strain Relief, Self-Lock. w/ round Lug H 45-3 S85049/5S ** 45 Qwik-Ty Strain Relief, Self-Locking H 45-3 S85049/6 ** 90 Qwik-Ty Strain Relief, Self-Lock. w/ round Lug H 45-3 S85049/6S ** 90 Qwik-Ty Strain Relief, Self-Locking H 45-3 S85049/7 390S02 Str. MI/RI nvironmental ackshell 39-6 S85049/8 390HS0 Str. MI/RI nvironmental ackshell H 39-7 S85049/9 380HS007 Str. MI/RI Non-nvironmental ackshell H 38-5 S85049/ 440S063 rimp Ring dapter H 44-2 LND * Page Number of Superceeding Part Number ** onsult actory *** Distributed by lenair **** MS V Thread en l Duty nd ell KSHLL ONNTOR DSINTORS DSI. SP. SRIS DSI. SP. SRIS DSI. SP. SRIS MIL-DTL-505 MS3400 PTT 602 MIL--840 MIL-DTL-26482 2 MIL-DTL-505 MS300 H MIL-DTL-38999 III & IV S8703 3 MIL--992 MS73XX N45 MIL-DTL-83723 I & III D MIL-DTL-26482 J MIL--85, 2, 3 & 4 40M39569 MIL-DTL-26500 luminum V959 D 56-3 N 2997, 46 S 0, LN 29504 N934 H302 MIL-DTL-38999 40M38277 PN 6433- PTT 64 PTT 66 I & II K MIL-DTL-83723 II PN 64-, -2 N934 H308, 9 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-5
Part Number Index Part Number Index lenair s Military Superceeding ommercial onnector Interface or Page Specification Part Number atalog P/N Description Designator (elow) No. S85049/2 0HS002 Non-nvironmental Strain Relief ackshell H -4 S85049/23 38000 45 MI/RI Non-nvironmental ackshell 38-6 S85049/ 38000 90 MI/RI Non-nvironmental ackshell 38-8 S85049/25 380S00 Str. MI/RI Non-nvironmental ackshell 38-0 S85049/26-440S063 rimp Ring dapter 44-3 S85049/26-2 ** rimp Ring 44-3 S85049/26-3 440S063 rimp Ring dapter with rimp Ring 44-3 S85049/27 60S0 Nut 6-6 S85049/27S ** Nut, Self Locking 6-6 S85049/ ** MI Rectangular ackshell MIL-DTL-83733 50-2 S85049/29 0S002 Non-nvironmental Strain Relief ackshell -5 S85049/30 400-00 Tag Ring dapter 40-3 S85049/3 60S0 Nut 6-7 S85049/3S ** Nut, Self Locking 6-7 S85049/- ** dapter, Non-nv., RI, 90 68-0 S85049/-2 ** dapter 68- S85049/33- ** dapter, Non-nv., RI, Str. 68-2 S85049/33-2 440S063 rimp Ring dapter 44-4 S85049/34 ** dapter D (MS34 and MS3 Only) -3 S85049/ 380S008 Str. MI/RI Non-nvironmental ackshell 38-4 S85049/37 380D007 90 MI/RI Non-nvironmental ackshell 38-5 S85049/38 6HS0 Str. Strain Relief H 62- S85049/38S 6HS048 Str. Strain Relief, Self-Locking H 62- S85049/38SS ** Str. Strain Relief, Self-Locking, St. Steel H 62- S85049/39 6H0 90 Strain Relief H 62-2 S85049/39S 6H048 90 Strain Relief, Self-Locking H 62-2 S85049/39SS ** 90 Strain Relief, Self-Locking, St. Steel H 62-2 S85049/4 6-053 Style Str. Strain Relief **** 62-3 S85049/42 6-053 Style H Str. Strain Relief **** 62-4 S85049/43 6047 45 Strain Relief 62-5 S85049/44 ** Rectangular Strain Relief ackshell MIL-DTL83733 50-3 S85049/45 ** Str. Strain Relief 62-6 S85049/46 ** 90 Strain Relief 62-7 S85049/47 602 90 Strain Relief 62-8 S85049/47S 6048 90 Strain Relief, Self-Locking 62-8 S85049/47SS 6048Z 90 Strain Relief, Self-Locking (Steel) 62-8 S85049/48-*** ** Rectangular Strain Relief ackshell MIL-DTL-308 50-4 S85049/48-2*** ** Rectangular Strain Relief ackshell MIL-DTL-308 50-5 S85049/48-3*** ** Rectangular Strain Relief ackshell MIL-DTL-308 50-6 S85049/49-2 6S02 Str. Strain Relief 62-9 S85049/49-2S 6S048 Str. Strain Relief, Self-Locking 62-9 S85049/49-2SS6S048Z Str. Strain Relief, Self-Locking (Steel) 62-9 S85049/50*** ** 90 Rectangular Strain Relief ackshell MIL-DTL-308 50-7 S85049/5-6046 90 Strain Relief 62- S85049/5S 6048 90 Strain Relief, Self-Locking 62- S85049/52-6S046 Str. Strain Relief 62- S85049/52S 6S048 Str. Strain Relief, Self-Locking 62- LND * Page Number of Superceeding Part Number ** onsult actory *** Distributed by lenair **** MS V Thread en l Duty nd ell KSHLL ONNTOR DSINTORS DSI. SP. SRIS DSI. SP. SRIS DSI. SP. SRIS MIL-DTL-505 MS3400 PTT 602 MIL--840 MIL-DTL-26482 2 MIL-DTL-505 MS300 H MIL-DTL-38999 III & IV S8703 3 MIL--992 MS73XX N45 MIL-DTL-83723 I & III D MIL-DTL-26482 J MIL--85, 2, 3 & 4 40M39569 MIL-DTL-26500 luminum V959 D 56-3 N 2997, 46 S 0, LN 29504 N934 H302 MIL-DTL-38999 40M38277 PN 6433- PTT 64 PTT 66 I & II K MIL-DTL-83723 II PN 64-, -2 N934 H308, 9 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-6
Part Number Index Part Number Index lenair s Military Superceeding ommercial onnector Interface or Page Specification Part Number atalog P/N Description Designator (elow) No. S85049/53 M85049/52 450S00 Str. Qwik-Ty Strain Relief 45-4 S85049/54 M85049/43 45000 45 Qwik-Ty Strain Relief 45-4 S85049/55 M85049/5 45000 90 Qwik-Ty Strain Relief 45-4 S85049/55 M85049/5S ** 90 Qwik-Ty Str. Rel., Self Lock., r. Lug 45-4 S85049/55S M85049/5S ** 90 Qwik-Ty Strain Relief, Self-Locking 45-4 S85049/56 450S00 Str. Qwik-Ty Strain Relief 45-5 S85049/57 45000 45 Qwik-Ty Strain Relief 45-5 S85049/57 ** 45 Qwik-Ty Str. Rel., Self Lock., r. Lug 45-5 S85049/57S ** 45 Qwik-Ty Strain Relief, Self-Locking 45-5 S85049/58 ** Potting oot Ring 30-2 S85049/59 30S002 Shrink oot dapter 3-3 S85049/60-30S00 Shrink oot dapter 3-4 S85049/60-2 30S002 Shrink oot dapter 3-5 S85049/6 ** Potting oot Ring MIL-DTL-27599 30-3 S85049/62 30S00 Shrink oot dapter 3-6 S85049/63 45000 90 Qwik-Ty Strain Relief 45-5 S85049/63 ** 90 Qwik-Ty Str. Rel., Self Lock., r. Lug 45-5 S85049/63S ** 90 Qwik-Ty Strain Relief, Self Locking 45-5 S85049/69 30HS00 Shrink oot dapter H 3-7 S85049/74*** ** Potting oot 68-3 S85049/75*** ** Potting oot 68-4 S85049/76 390L0 90 MI/RI nvironmental ackshell 39-8 S85049/77 390K0 45 MI/RI nvironmental ackshell 39-9 S85049/78 390HK0 45 MI/RI nvironmental ackshell H 39- S85049/79 390HL0 90 MI/RI nvironmental ackshell H 39-2 S85049/82 440S069 Str. anding ackshell 44-5 S85049/83 440H069 45 anding ackshell 44-5 S85049/84 440J069 90 anding ackshell 44-5 S85049/85 440S069 Str. anding ackshell 44-6 S85049/86 440H069 45 anding ackshell 44-6 S85049/87 440J069 90 anding ackshell 44-6 S85049/88 440HS069 Str. anding ackshell H 44-8 S85049/89 440HH069 45 anding ackshell H 44-8 S85049/90 440HJ069 90 anding ackshell H 44-8 S85049/9 6HS042 Str. Strain Relief, omposite Material H 62- S85049/92 6H042 90 Strain Relief, omposite Material H 62- S85049/93 687-7 anding Split Ring 68-5 S85049/94*** ** Mounting Device, ull Perimeter Various 68-6 S85049/95*** ** Mounting Device, 3/4 Perimeter Various 68-7 S85049/96*** ** Mounting Device, /4 Perimeter Various 68-8 M855/*** ** Mounting Device, ull Perimeter Various 68-9 M855/2*** ** Mounting Device, 3/4 Perimeter Various 68- M855/3*** ** Mounting Device, /4 Perimeter Various 68-8 M90563 660-007 Protective over, Receptacle MIL--992 66-2 M90564 660-007 Protective over, Plug MIL--992 66-2 LND * Page Number of Superceeding Part Number ** onsult actory *** Distributed by lenair **** MS V Thread en l Duty nd ell KSHLL ONNTOR DSINTORS DSI. SP. SRIS DSI. SP. SRIS DSI. SP. SRIS MIL-DTL-505 MS3400 PTT 602 MIL--840 MIL-DTL-26482 2 MIL-DTL-505 MS300 H MIL-DTL-38999 III & IV S8703 3 MIL--992 MS73XX N45 MIL-DTL-83723 I & III D MIL-DTL-26482 J MIL--85, 2, 3 & 4 40M39569 MIL-DTL-26500 luminum V959 D 56-3 N 2997, 46 S 0, LN 29504 N934 H302 MIL-DTL-38999 40M38277 PN 6433- PTT 64 PTT 66 I & II K MIL-DTL-83723 II PN 64-, -2 N934 H308, 9 05 lenair, Inc. ode 063 LNIR, IN. 2 IR WY LNDL, 9-97 88-7-6000 X 88-500-992-7
Series 80 Mighty Mouse onnectors and ables lenair Mighty Mouse onnectors and cables offer superior environmental performance in an ultraminiature package. Products include miniaturized threaded, quick disconnect and bayonet connectors. Sav-on onnector savers lenair's makes a connector saver for every Military Standard circular connector. The low-profile gobetweens are designed to prevent damage to deliverable connectors and extend the life of test cables and harnesses. Micro-D TwistPin onnectors and ccessories lenair offers both Military Standard 8353 Micro-D connectors as well as OTS selections, backshells, mounting hardware and more. Our unique TwistPin contact system offers superior performance. eo-marine Interconnect Solutions Our eo-marine product line includes corrosion-free composite junction boxes, harsh environment connectors and cables, x arrier lands, underwater interconnect assemblies and hydraulic earth bond equipment. ackshell ssembly Tools, anding Tools and ccessories Most interconnect tool suppliers are selling somebody else's ideas, but as you will discover in this catalog, lenair builds its assembly tools from the ground up. 64 information-packed pages. lenair: World of Interconnect Solutions lenair has been the leading manufacturer and supplier of commercial and Military Standard connector accessories since 956. uilding on that foundation, we now offer a dozen, full-spectrum product lines designed to meet every interconnect requirement. iber Optic Interconnect Solutions lenair s tactical fiber optic connectors and cables are used in military aerospace applications such as fighter jets and unmanned aerial vehicles. Products include Mil-Dtl-38999 connectors, termini and inspection and test toolkits. Military Standard ircular onnectors Military Standard ircular onnectors from lenair now include hermetic, environmental and filter versions of MIL--26482, MIL-- 840, MIL-DTL-505, and Mil-DTL- 38999 Series I, II, III and IV many in stock and ready for shipment. lenair, Inc. 2 ir Way lendale, alifornia 9-97 Telephone: 88-7-6000 acsimilie: 88-500-992 -mail: sales@glenair.com United States United Kingdom ermany rance Nordic Italy Spain www@glenair.com all lenair today at 88-7-6000 to order your D/catalogs; or view our entire product line on the Internet at and use the literature order form for immediate fulfillment.