Pricing Guide for Horizontal AboveNEMA Motors Rev. 2 http://www.usa.siemens.com/motors
Part RevRec Page 1 Date 06/13 Revision Record Rev. No. Section Part Page Date Description 0 All All All 11/12 NEW 1 2 1 5 12/12 1. Replaced >1000 hp range for WPII and <=1000 hp range for TEFC 2. Deleted all 2 pole references and pricing for TEFC >1000 hp 3. Added missing price for TEFC SH560s Frame. 2 1 1, 2, 3 5, 8 06/13 1750HP, 1800RPM changed Price and Std. Rotor 2 1 4 3, 5 06/13 1750HP, 1800RPM changed Price and Std. Rotor 2 1 1, 2, 3 10 06/13 1500HP & 1750HP, 1800RPM changed Price and 2 1 4 7 06/13 1500HP & 1750HP, 1800RPM changed Price and All information in this guide is subject to change without notice. Rev. No. Approved: Title Date 0 (Joseph Moreland) Business Manager 6/28/2013
Part General Page 1 General Information As one of the World s leading provider of large motors with Global service and support second to none, Siemens sells and manufactures a complete line of motors at the ISO9001 Certified Norwood, OH plant. This 350,000 square foot facility has produced over 150,000 high voltage motors continuously since 1898. The Norwood plant offers horizontal AC squirrelcage induction motors through 18,000 horsepower and voltage ranges from 460 through 13200 volts. The plant also manufactures a complete line of vertical motors. Larger induction motors as well as wound rotor and synchronous motors are also available from other Siemens plants located in Germany. The following pages covers horizontal induction motors through 5000HP. It is intended for use in pricing the more common ratings, enclosures and modifications. Special features or applications which could affect frame size and, therefore seriously impact cost and price, should be referred to factory for price and availability. Ratings that fall outside those covered in this book, as well as all vertical motors, should also be referred to factory for pricing and availability. For additional information and updates of our products and services visit our website at www.usa.siemens.com/motors and click on the Large AC Above NEMA motors link. NOTE: This Pricing Guide for Horizontal Above NEMA Motors ANSP600001112 supersedes all previous issues of the Pricing Guide for Horizontal Above NEMA Motors.
Part General Page 2 General Information All ratings in this price guide are designed for the following; Horizontal Mounting 3 phase Class F insulation Service factor of 1.0 Maximum temperature rise of 80 degrees C by resistance at 1.0 service factor Maximum 40 degrees C ambient Altitude of 3300 feet or less Direct connection to a typical centrifugal load with rated voltage and frequency applied at the motor terminals and a load inertia value equal to or less than NEMA value for the rating. Also, during accelerating period, connected load torque shall be equal to, or less than, a torque which varies as square of the speed and is equal to 100% of fullload torque at rated speed. Frame sizes are estimated and are subject to change without notice. Frame sizes may have a suffix or combination of suffixes dependent upon enclosure, bearings, and/or features; D = Flanged. Indicates that motor is to be supplied with a Dflanged bearing housing. S = Short shaft. Indicates motor is to be supplied with Siemens standard short shaft extension for direct connection except on 680 frame series where no suffix is used. Y = Special mounting. Indicates motor is to be supplied with nonstandard mounting dimensions. Z = Special shaft. Indicates motor is to be supplied with nonstandard or special shaft dimensions. No Suffix = Indicates that motor is to be supplied with a Siemens standard long shaft extension except on 680 & 800 frame series. The long shaft is provided if Belt Drive modification is made from the Modification & Accessories Section. Some 680 frame ratings can be supplied with grease lubricated ball bearings. Refer exact requirements to factory for price and availability. Lead Times will be per the latest issue of the Norwood Product Lead Times document ANMC 70000xxxx.
Part Encl Page 3 Enclosures Designed To Meet All Application And Environmental Needs Horizontal Drip Proof / Weather Protected I ( CG) / IC01 / IP23 Meets or exceeds industry standards for NEMA WPtype machines. Best suited for indoor applications where not exposed to extreme ambient conditions. Available through 10,000 HP. Horizontal Drip Proof / Weather Protected II ( CGII) / IC01 / IP24 Meets or exceeds industry standards for NEMA WPIItype machines. Specifically designed for outdoor applications where motor is not likely to be protected by other structures. Available through 18,000 HP. Totally Enclosed Fan Cooled ( CZ, CGZ, 1LA4) / IC411 / IP54IP55 Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes cooling fins on all four quadrants of yoke and housings. Available through 3,000 HP. Totally Enclosed AirtoAir Cooled ( CAZ) / IC611 / IP54 Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes airtoair tubetype heat exchangers. Available through 14,000 HP.
Part Encl Page 4 Enclosures Designed To Meet All Application And Environmental Needs Totally Enclosed WatertoAir Cooled ( CGG) / ICW81 / IP54 Same critical design requirements as the airtoair cooled machine with the added benefit of low noise and efficient water cooling. Available through 18,000 HP.
Machine Readable Product Description () Structure Part Page 5 Siemens Norwood AboveNEMA motors has adopted the MachineReadable Product Designation structure (). These designations, which are very similar in structure to those used by many other Siemens Business Units, will provide a clear means of product designation. The benefits of adopting the codes include: 1) Consistent communication between regional organizations, field sales personnel and the business unit 2) Improved processes within Norwood 3) Enables smoother transition into product standardization 4) Provides a basis for product leadtimes The structure is generated by two segments: 1) Product codes 12 Alphanumeric characters which define: Enclosure Framesize Motor speed (Number of poles) Rotor construction Voltage / Frequency of construction (horizontal, vertical, flangemounted, etc) 2) Option codes Standard accessories The next several pages describe the Product Code structure for; Modular (ODP/WPI, WPII, TEAAC and TEWAC enclosures) machines. TEFC machines. In the Modifications and Accessories Section, you will find the Option Codes and Categories listed. It is important that these codes, both Product and Options, are clearly indicated on the orders. The Categories, explained in more detail later, are listed as the minimum category for the given option. The base motor category or other options with higher categories may impact the overall category of the motor. The highest category will dictate the applicable leadtime of the motor.
Machine Readable Product Description () Structure Part Page 6 MODULAR Sub Group Factory Data Position 1 2 3 4 5 6 7 8 9 10 11 12 Z Example 1 R P 2 6 8 E 2 H E 3 0 Z 1 + 2 Main Group Identification 1R Induction Motor (Modular ODP/WPI, WPII, TEWAC or TEAAC) 1S Induction Motor (Modular) Hazardous Areas 3 Sub Group (Enclosuretype & Hazardous Area) 1RA ODP / WPI (IP23 / IC01), Nonhazardous Areas 1RN TEWAC (IP54 / ICW81), Nonhazardous Areas 1RP WPII (IP24 / IC01), Nonhazardous Areas 1RQ TEAAC (IP54 / IC611 or IC616), Nonhazardous Areas 1SC WPII (IP24 / IC01), Hazardous Areas (Division 2 or Zone 2) 1SG TEAAC (IP54 / IC611 or IC616), Hazardous Areas (Division 2 or Zone 2) 1SL TEWAC (IP54 / ICW81), Hazardous Areas (Division 2 or Zone 2) 4 Factory Specifics 2 2 = Norwoodbuilt 5 + 6 Framesize 50 500 Frame 58 580 Frame 68 680 Frame 80 800 Frame 11 1120 Frame 7 Reserved for Factory Use E This position will contain letters for Norwoodbuilt motors 8 Number of Poles 2 2 pole motor 4 4 pole motor 6 6 pole motor 8 8 pole motor 3 10 pole motor 5 12 pole motor 7 14 pole motor 9 Refer to factory for slower speeds 9 ODP / WPI, WPII & TEWAC Standard Internal Fan Design H TEAAC = Use H Code for TEAACs with Auxiliary Blowers for (IC616) J TEAAC = Use J Code for TEAACs with ShaftMounted External Fan (IC611) 10 Rotor Motors without VFD (Line Supply Operation) Motors used with VFD B Aluminum Diecast L Low Voltage Drive Aluminum Rotor E Copperbar M Low Voltage Drive Copper Rotor N Medium Voltage Drive Aluminum Rotor V Medium Voltage Drive Copper Rotor 11 Voltage, frequency Medium / High Voltage Applications Low Voltage Applications 0 3300 V, 50 hz 0 690 V, 1 6600 V, 60 hz 1 460 V, 60 hz 2 13200 V, 60 hz 2 575 V, 60 hz 3 4160 V, 60 hz 3 380 V, 50 hz 4 4000 V, 60 hz 4 415 V, 50 hz 5 2300 V, 60 hz 5 500 V, 6 6000 V, 50 hz 6 7 6600 V, 50 hz 7 660 V, 8 10000 V, 50 hz 8 9 other voltage/frequency 9 other voltage/frequency 12 Mounting 0 Horizontal, footmounted 1 NEMA DFlange, with feet 3 Vertical, hollow shaft 4 Vertical, solid shaft, with canopy 8 Vertical, solid shaft, without canopy 9 Other types of mounting (requires additional text) 13 Option Code Z Means that the motors will have additional options Main Group Framesize Reserved # of Poles Rotor Volts / Hz Mounting Options
Machine Readable Product Description () Structure Part Page 7 TEFC (All frames except SH560) Main Group S ub Group Factory Framesize Reserved # of Poles Rotor Line Supply or VFD Volts / Hz Mounting Options Data Position 1 2 3 4 5 6 7 8 9 10 11 12 Z Example 1 L A 2 5 8 E 2 L N 3 0 Z 1 + 2 Main Group Identification 1L Induction Motor (TE FC), NonHazardous Area 1M Induction Motor (TE FC), Hazardous Area (Div. or Zone 2) 1P Induction Motor for special application (TEAO) 3 Sub Group (Enclosuretype & Hazardous Area) A TEFC, IP54, Basic Version Q TEAO Forcedventilated S TEFC, IP54, Hazardous Area (Division 2 or Zone 2) 4 Factory Specifics 2 2 = Norwoodbuilt 5 + 6 Fra mesize 40 SH400 Frame 45 SH450 Frame 50 500 Frame 58 580 Frame 70 708 Frame 78 780 Frame 88 880 Frame 7 Re served for Fa ctory Use E This position will contain letters for Norwoodbuilt motors 8 Number of Poles 2 2 pole motor 4 4 pole motor 6 6 pole motor 8 8 pole motor 3 10 pole motor 5 12 pole motor 7 14 pole motor 9 Refer to factory for slower speeds 9 Rotor L Aluminum diecast N Copperbar 10 Line Supply or VFD (LV or MV ) A Linesupply; Low V oltage (<1000 V ) M VFD; Low Voltage (<1000 V) N Linesupply; Medium Voltage (>1000 V) V VFD; Medium Voltage (>1000 V) 11 Voltage, frequency Line supply operation, MV / HV MV drive converter operation Line supply/drive converter operation, LV 0 3300 V, 50 hz 0 2.3kV, 50 hz 0 690 V 1 6600 V, 60 hz 1 2.3 kv, 60 hz 1 460 V 2 2300 V, 60 hz 2 3.3 kv, 50 hz 2 575 V 3 3000 V, 50 hz 3 3.3 kv, 60 hz 5 500 V 4 4160 V, 60 hz 4 4.16 kv, 50 hz 7 660 V 5 4000 V, 60 hz 5 4.16 kv, 60 hz 9 Other Voltages 6 6000 V, 50 hz 7 6600 V, 50 hz 9 other voltage/frequency 12 Mounting 0 Horizontal, footmounted 1 NE MA DFlange, with feet 9 Other types of mounting (requires additional text) 13 Option Code Z M eans that the motors will have additional options
Machine Readable Product Description () Structure Part Page 8 TEFC (SH5 60 F rame On ly ) Main Group S ub Group Factory Framesize Reserved # of Poles Rotor Line Supply or VFD Volts / Hz Mounting Options Data Position 1 2 3 4 5 6 7 8 9 10 11 12 Z Example 1 L A 4 5 6 0 2 C N 5 0 Z 1 + 2 Upper and Main Group Identifica tion 1L Induction Motor (TE FCIP55), NonHazardous Area 1M Induction Motor (TE FCIP55), Hazardous Area (Div. or Zone 2) 1P Induction Motor for special application (TEAO) 3 L ow er Group A Squirrelcage, basic version Q TEAO Forcedventilated S TEFC Hazardous Area (Division 2 or Zone 2) 4 Series 4 HCom pact II 5 + 6 Shaft Height 56 SH560 Frame 7 Code for re lative le ngth of the stator core 0 Short 4 Long 2 Medium 6 Extra long 8 Number of Poles 2 2 pole motor 4 4 pole motor 6 6 pole motor 8 8 pole motor 9 Refer to factory for slower speeds 9 Rotor A Aluminum diecast C Copperbar 10 Line Supply or VFD (LV or MV ) A Linesupply; Low V oltage M Masterdrives N Linesupply; High V oltage V MV drive converters W Other drive converters 11 Voltage, frequency Line supply operation, MV / HV MV drive converter operation Line supply/drive converter operation, LV 0 3300 V, 50 hz 0 2.3kV, 50 hz 0 690 V 1 6600 V, 60 hz 1 2.3 kv, 60 hz 1 460 V 3 3000 V, 50 hz 2 3.3 kv, 50 hz 2 575 V 4 4160 V, 60 hz 3 3.3 kv, 60 hz 5 500 V 5 4000 V, 60 hz 4 4.16 kv, 50 hz 7 660 V 6 6000 V, 50 hz 5 4.16 kv, 60 hz 9 Other Voltages 7 6600 V, 50 hz 9 other voltage/frequency 12 Mounting 0 Horizontal, footmounted 9 Other types of mounting (requires additional text) 13 Option Code Z M eans that the motors will have additional options
Part Index Page 9 Index Page Part 1 ODP Enclosure 60 Hertz 110 Part 2 WPI Enclosure 60 Hertz 110 Part 3 WPII Enclosure 60 Hertz 110 Part 4 TEWAC Enclosure 60 Hertz 17 Part 5 TEFC Enclosure 60 Hertz 110 Part 6 TEAAC Enclosure 60 Hertz 17 Part 1A ODP Enclosure 50 Hertz 13 Part 2A WPI Enclosure 50 Hertz 13 Part 3A WPII Enclosure 50 Hertz 13 Part 4A TEWAC Enclosure 50 Hertz 12 Part 5A TEFC Enclosure 50 Hertz 12 Part 6A TEAAC Enclosure 50 Hertz 12 Part 5B TEFC Enclosure per IEEE 841 Std 2009 14 Section 2 Modifications & Accessories Adjustable Speed Drives 1 Altitude 2 Ambient 2 API 541 3 rd or 4 th Editions 3 API 547 2005 36 Assembly 7 Balance Precision Balance for Low Vibration 7 Balance Special 7 Bearings Insulation 8 Bearings Systems 8 Bearings Oil Sump Heaters 8 Bearing Protective Devices Mechanical 9 Bearing Protective Devices Temperature 1011 Bearings Sleeve 12 Belt Drive Applications 13 Cancellation Charges 14 Chipper/Crusher Drives 14 Couplings 15 Current Transformers 15 Differential Pressure Switch 15 Direction of 15 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products.
Part Index Page 10 Index Section 2 Modifications & Accessories continued Page Efficiency Higher Than Standard 15 Export Packaging 16 Fan External 1617 Fan Housing 17 Filters 18 Flanges 18 Freight 18 Frequency 50 Hertz 18 Ground Pads 19 Hardware 19 Hazardous Location / Temperature Code 19 IEEE 841 19 Inrush Current 19 Insulation 20 Load Inertia 20 Noise Requirements 21 Paint Systems 22 Rotor / Corrosion Protection 22 Service Factor 23 Shaft Extension 23 Shaft Seal 23 Shipment Terms & Packaging 24 Software Packages 24 Soleplates / Slide Rails / Shims 24 Space Heaters 25 Starting Reduced Voltage/Soft Start 25 Startup Assistance 25 Stator Connections 25 Stator Insulation/Treatments 26 Stator Protective Devices 26 Terminal Boxes / Differential & Surge Protection / Current Transformers / Standoff Insulators 2728 Tests 2930 Torques NonStandard 31 Voltages 31 Warranty Offerings 31 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products.
ODP ENCLOSURE 60 Hertz 460 Volt s & Part 1 Page 1 200 3600 460 508 $45,956 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25062BA10 200 1800 460 508 $41,605 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25074BA10 200 1200 460 508 $42,909 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25106BA10 200 900 460 508 $44,841 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25128BA10 200 720 460 588 $55,192 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BA10 200 600 460 588 $55,753 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26145BA10 200 514 460 588 $93,427 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26187BD10 200 450 460 588 $93,427 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26189BD10 250 3600 460 508 $46,690 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25062BA10 250 1800 460 508 $42,909 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BA10 250 1200 460 508 $44,841 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25126BA10 250 900 460 508 $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25148BA10 250 720 460 588 $56,060 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BA10 250 600 460 588 $67,335 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26165BA10 250 514 460 588 $96,326 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26217BD10 300 3600 460 508 $46,540 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BA10 300 1800 460 508 $43,551 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BA10 300 1200 460 508 $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25146BA10 300 900 460 508 $50,971 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25188BA10 300 720 460 588 $59,271 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26143BA10 300 600 460 588 $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26185BA10 300 514 460 5810 $102,098 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BD10 350 3600 460 508 $47,260 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BA10 350 1800 460 508 $44,841 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25124BA10 350 1200 460 508 $49,053 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BA10 350 900 460 508 $53,717 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25218BA10 350 720 460 588 $67,335 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26163BA10 350 600 460 5810 $84,710 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26235BA10 400 3600 460 508 $48,537 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BA10 400 1800 460 508 $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BA10 400 1200 460 508 $49,787 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BA10 400 900 460 5010 $61,587 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25258BA10 400 720 460 588 $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26183BA10 400 600 460 5810 $96,421 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26255BA10 450 3600 460 508 $49,288 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BA10 450 1800 460 508 $47,832 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BA10 450 1200 460 5010 $58,389 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25216BA10 450 900 460 5010 $65,714 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25308BA10 450 720 460 588 $78,939 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26213BA10 450 600 460 5810 $117,668 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BD10 500 3600 460 508 $52,884 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BA10 500 1800 460 508 $49,053 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BA10 500 1200 460 5010 $62,050 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25256BA10 500 900 460 588 $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BA10 500 720 460 5810 $84,710 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26233BA10 500 600 460 5810 $119,489 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BD10
ODP ENCLOSURE 60 Hertz 460 Volt s & Part 1 Page 2 600 3600 460 508 $53,703 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BA10 600 1800 460 508 $50,971 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BA10 600 1200 460 5010 $63,885 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25276BA10 600 900 460 588 $78,939 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BA10 600 720 460 5810 $100,280 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26273BA10 700 3600 460 508 $57,244 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25152BA10 700 1800 460 5010 $58,389 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25214BA10 700 1200 460 588 $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26186BA10 700 900 460 5810 $96,421 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26258BA10 800 3600 460 5010 $65,665 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BA10 800 1800 460 5010 $60,218 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BA10 800 1200 460 588 $78,939 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BA10 800 900 460 5810 $100,280 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BA10
ODP ENCLOSURE 60 Hertz 2300 Volt s & Part 1 Page 3 200 3600 2300 508 $47,491 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB50 200 1800 2300 508 $43,820 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB50 200 1200 2300 508 $43,820 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25106BB50 200 900 2300 508 $45,749 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25128BB50 200 720 2300 588 $57,536 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BB50 200 600 2300 588 $58,704 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26145BB50 200 514 2300 588 $97,262 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26217BE50 200 450 2300 6811 $171,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE50 250 3600 2300 508 $48,226 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB50 250 1800 2300 508 $44,476 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB50 250 1200 2300 508 $45,749 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25126BB50 250 900 2300 508 $49,965 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25168BB50 250 720 2300 588 $58,440 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BB50 250 600 2300 588 $77,570 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26185BB50 250 514 2300 5810 $103,976 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BE50 250 450 2300 6811 $174,038 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE50 300 3600 2300 508 $48,984 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB50 300 1800 2300 508 $45,749 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25124BB50 300 1200 2300 508 $48,035 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25146BB50 300 900 2300 508 $54,637 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25218BB50 300 720 2300 588 $61,125 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26143BB50 300 600 2300 588 $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26215BB50 300 514 2300 5810 $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26277BE50 300 450 2300 6811 $176,836 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE50 350 3600 2300 508 $49,767 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB50 350 1800 2300 508 $48,035 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB50 350 1200 2300 508 $49,965 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BB50 350 900 2300 5010 $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25278BB50 350 720 2300 588 $69,402 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26163BB50 350 600 2300 5810 $86,588 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26235BB50 350 514 2300 6811 $171,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27187BE50 350 450 2300 6811 $180,664 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE50 400 3600 2300 508 $50,662 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB50 400 1800 2300 508 $48,754 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB50 400 1200 2300 508 $51,894 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25186BB50 400 900 2300 5010 $66,634 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25308BB50 400 720 2300 588 $77,570 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26183BB50 400 600 2300 5810 $96,814 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26255BB50 400 514 2300 6811 $177,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE50 400 450 2300 6811 $183,522 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE50
ODP ENCLOSURE 60 Hertz 2300 Volt s & Part 1 Page 4 450 3600 2300 508 $51,446 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB50 450 1800 2300 508 $49,965 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB50 450 1200 2300 5010 $59,307 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25216BB50 450 900 2300 588 $77,570 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB50 450 720 2300 588 $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26213BB50 450 600 2300 5810 $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BE50 450 514 2300 6811 $180,576 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE50 450 450 2300 6811 $190,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27259BE50 500 3600 2300 508 $52,255 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB50 500 1800 2300 508 $50,713 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB50 500 1200 2300 5010 $62,782 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25256BB50 500 900 2300 588 $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BB50 500 720 2300 5810 $86,588 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26233BB50 500 600 2300 6811 $171,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27185BE50 500 514 2300 6811 $190,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27257BE50 500 450 2300 6811 $197,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27279BE50 600 3600 2300 508 $53,832 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB50 600 1800 2300 508 $51,894 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BB50 600 1200 2300 5010 $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25276BB50 600 900 2300 5810 $96,814 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26258BB50 600 720 2300 5810 $100,393 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26273BB50 600 600 2300 6811 $177,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE50 600 514 2300 6811 $201,748 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27307BE50 600 450 2300 6811 $208,181 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27329BE50 700 3600 2300 508 $54,666 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB50 700 1800 2300 5010 $60,985 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BB50 700 1200 2300 588 $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB50 700 900 2300 5810 $100,393 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BB50 700 720 2300 6811 $177,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE50 700 600 2300 6811 $184,190 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27235BE50 700 514 2300 6813 $228,003 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27347BE50 700 450 2300 6813 $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27439BE50 800 3600 2300 508 $58,186 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25152BB50 800 1800 2300 5010 $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB50 800 1200 2300 588 $81,111 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB50 800 900 2300 5810 $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26278BE50 800 720 2300 6811 $190,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE50 800 600 2300 6811 $197,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE50 800 514 2300 6813 $247,287 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27417BE50 900 3600 2300 5010 $66,610 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB50 900 1800 2300 5010 $65,769 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB50 900 1200 2300 5810 $86,588 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26236BB50 900 900 2300 5812 $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26328BE50 900 720 2300 6811 $193,633 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE50 900 600 2300 6811 $201,748 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27305BE50 900 514 2300 6813 $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27437BE50
ODP ENCLOSURE 60 Hertz 2300 Volt s & Part 1 Page 5 Date /1 1000 3600 2300 5010 $69,790 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB50 1000 1800 2300 5810 $82,549 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26214BB50 1000 1200 2300 5810 $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26276BE50 1000 900 2300 5812 $144,463 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26368BE50 1000 720 2300 6811 $197,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27273BE50 1000 600 2300 6813 $234,436 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27365BE50 1250 3600 2300 5010 $76,125 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25232BB50 1250 1800 2300 5810 $96,814 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26254BB50 1250 1200 2300 5812 $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26326BE50 1250 900 2300 6811 $182,464 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27258BE50 1250 720 2300 6813 $228,003 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27343BE50 1250 600 2300 6813 $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27435BE50 1500 3600 2300 5810 $94,249 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB50 1500 1800 2300 5810 $100,393 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26274BB50 1500 1200 2300 5812 $144,463 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26366BE50 1500 900 2300 6811 $195,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27308BE50 1500 720 2300 6813 $247,287 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27413BE50 1750 3600 2300 5810 $95,741 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB50 1750 1800 2300 5812 $133,079 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26324BB50 1750 1200 2300 6811 $195,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27306BE50 1750 900 2300 6813 $228,003 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27368BE50 1750 720 2300 6813 $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE50 2000 3600 2300 5810 $105,427 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26232BB50 2000 1800 2300 5812 $144,095 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26364BE50 2000 1200 2300 6813 $221,579 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27346BE50 2000 900 2300 6813 $240,863 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27418BE50 2250 3600 2300 5812 $125,783 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26272BB50 2250 1800 2300 6811 $175,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27254BE50 2250 1200 2300 6813 $234,436 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27386BE50 2500 3600 2300 5812 $134,029 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB50 2500 1800 2300 6811 $180,439 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27274BE50 2500 1200 2300 6813 $240,863 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27416BE50 3000 3600 2300 6811 $183,920 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27232BE50 3000 1800 2300 6813 $203,978 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27324BE50 3500 3600 2300 6813 $210,856 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27272BE50 3500 1800 2300 6813 $216,832 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27364BE50 4000 3600 2300 6813 $217,454 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27302BE50 4000 1800 2300 6813 $229,695 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27414BE50 4500 3600 2300 6813 $224,054 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27322BE50 5000 3600 2300 6813 $230,661 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27342BE50 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.
ODP ENCLOSURE 60 Hertz 4000 Volt s & Part 1 Page 6 200 3600 4000 508 $48,912 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB40 200 1800 4000 508 $45,201 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB40 200 1200 4000 508 $45,201 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25106BB40 200 900 4000 508 $49,413 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25148BB40 200 720 4000 588 $58,796 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BB40 200 600 4000 588 $70,470 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26165BB40 200 514 4000 5810 $104,595 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BE40 200 450 4000 6811 $172,349 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE40 250 3600 4000 508 $49,669 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB40 250 1800 4000 508 $45,877 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB40 250 1200 4000 508 $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25126BB40 250 900 4000 508 $53,265 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25188BB40 250 720 4000 588 $62,131 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26143BB40 250 600 4000 588 $78,881 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26185BB40 250 514 4000 5810 $106,214 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BE40 250 450 4000 6811 $175,076 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE40 300 3600 4000 508 $50,450 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB40 300 1800 4000 508 $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25124BB40 300 1200 4000 508 $49,413 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25146BB40 300 900 4000 5010 $62,363 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25238BB40 300 720 4000 588 $70,470 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26163BB40 300 600 4000 588 $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26215BB40 300 514 4000 6811 $172,349 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27187BE40 300 450 4000 6811 $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE40 350 3600 4000 508 $51,256 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB40 350 1800 4000 508 $49,413 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB40 350 1200 4000 508 $51,345 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BB40 350 900 4000 5010 $66,171 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25278BB40 350 720 4000 588 $78,881 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26183BB40 350 600 4000 5810 $87,207 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26235BB40 350 514 4000 6811 $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE40 350 450 4000 6811 $181,611 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE40 400 3600 4000 508 $52,082 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB40 400 1800 4000 508 $50,153 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB40 400 1200 4000 508 $53,265 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25186BB40 400 900 4000 5010 $82,029 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA25308BE40 400 720 4000 588 $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26213BB40 400 600 4000 5810 $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26255BB40 400 514 4000 6811 $181,611 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE40 400 450 4000 6811 $185,209 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27239BE40
ODP ENCLOSURE 60 Hertz 4000 Volt s & Part 1 Page 7 450 3600 4000 508 $52,889 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB40 450 1800 4000 508 $51,345 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB40 450 1200 4000 5010 $60,676 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25216BB40 450 900 4000 588 $78,881 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB40 450 720 4000 5810 $87,207 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26233BB40 450 600 4000 5810 $119,003 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BE40 450 514 4000 6811 $185,209 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27237BE40 450 450 4000 6811 $198,069 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27279BE40 500 3600 4000 508 $53,720 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB40 500 1800 4000 508 $52,114 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB40 500 1200 4000 5010 $64,342 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25256BB40 500 900 4000 588 $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BB40 500 720 4000 5810 $101,616 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26273BB40 500 600 4000 6811 $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE40 500 514 4000 6811 $191,642 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27257BE40 500 450 4000 6811 $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27309BE40 600 3600 4000 508 $55,256 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB40 600 1800 4000 508 $53,265 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BB40 600 1200 4000 5010 $66,171 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25276BB40 600 900 4000 5810 $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26258BB40 600 720 4000 6811 $172,349 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27183BE40 600 600 4000 6811 $181,611 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE40 600 514 4000 6811 $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27307BE40 600 450 4000 6813 $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27369BE40 700 3600 4000 508 $56,111 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB40 700 1800 4000 5010 $62,363 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BB40 700 1200 4000 588 $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB40 700 900 4000 5810 $101,616 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BB40 700 720 4000 6811 $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE40 700 600 4000 6811 $185,209 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27235BE40 700 514 4000 6813 $231,274 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27347BE40 700 450 4000 6813 $256,988 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27439BE40 800 3600 4000 508 $59,604 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25152BB40 800 1800 4000 5010 $66,171 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB40 800 1200 4000 5810 $87,207 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26236BB40 800 900 4000 5810 $119,003 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26278BE40 800 720 4000 6811 $191,642 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE40 800 600 4000 6811 $198,069 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE40 800 514 4000 6813 $250,561 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27417BE40 900 3600 4000 5010 $68,027 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB40 900 1800 4000 5010 $67,162 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB40 900 1200 4000 5810 $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26256BB40 900 900 4000 5812 $134,671 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26328BE40 900 720 4000 6811 $198,069 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27273BE40 900 600 4000 6811 $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27305BE40
ODP ENCLOSURE 60 Hertz 4000 Volt s & Part 1 Page 8 Date /1 1000 3600 4000 5010 $71,201 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB40 1000 1800 4000 5810 $83,701 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26214BB40 1000 1200 4000 5810 $119,003 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26276BE40 1000 900 4000 5812 $145,686 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26368BE40 1000 720 4000 6811 $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27303BE40 1000 600 4000 6813 $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27365BE40 1250 3600 4000 5010 $77,546 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25232BB40 1250 1800 4000 5810 $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26254BB40 1250 1200 4000 5812 $134,671 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26326BE40 1250 900 4000 6811 $183,474 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27258BE40 1250 720 4000 6813 $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27363BE40 1250 600 4000 6813 $256,988 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27435BE40 1500 3600 4000 5810 $97,212 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB40 1500 1800 4000 5810 $101,616 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26274BB40 1500 1200 4000 5812 $145,686 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26366BE40 1500 900 4000 6811 $196,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27308BE40 1500 720 4000 6813 $256,988 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE40 1750 3600 4000 5810 $98,750 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB40 1750 1800 4000 5812 $1, 8 Ball Grease Lube Self Bidirectional CG 1RA26344BB40 1750 1200 4000 6811 $196,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27306BE40 1750 900 4000 6813 $231,274 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27368BE40 1750 720 4000 6813 $261,054 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE40 2000 3600 4000 5810 $108,485 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26232BB40 2000 1800 4000 5812 $145,320 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26364BE40 2000 1200 4000 6813 $224,847 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27346BE40 2000 900 4000 6813 $244,137 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27418BE40 2250 3600 4000 5812 $138,322 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB40 2250 1800 4000 6811 $176,636 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27254BE40 2250 1200 4000 6813 $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27386BE40 2500 3600 4000 5812 $140,382 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB40 2500 1800 4000 6811 $181,464 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27274BE40 2500 1200 4000 6813 $244,137 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27416BE40 3000 3600 4000 6811 $184,955 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27232BE40 3000 1800 4000 6813 $207,249 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27324BE40 3500 3600 4000 6813 $214,220 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27272BE40 3500 1800 4000 6813 $220,109 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27364BE40 4000 3600 4000 6813 $220,815 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27302BE40 4000 1800 4000 6813 $232,960 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27414BE40 4500 3600 4000 6813 $227,415 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27322BE40 5000 3600 4000 6813 $234,019 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27342BE40 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.
ODP ENCLOSURE 60 Hertz 6600 Volt s & Part 1 Page 9 300 1800 6600 508 $53,537 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB10 350 1800 6600 508 $54,338 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB10 350 1200 6600 588 $84,262 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB10 350 900 6600 588 $81,152 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB10 350 720 6600 6811 $175,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27183BE10 350 600 6600 6811 $175,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27185BE10 400 3600 6600 508 $55,159 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB10 400 1800 6600 508 $55,463 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB10 400 1200 6600 588 $85,567 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB10 400 900 6600 588 $82,409 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB10 400 720 6600 6811 $178,396 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27183BE10 400 600 6600 6811 $182,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE10 450 3600 6600 508 $56,012 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB10 450 1800 6600 5010 $62,581 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BB10 450 1200 6600 588 $86,912 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB10 450 900 6600 588 $84,262 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BB10 450 720 6600 6811 $182,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE10 450 600 6600 6811 $184,927 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE10 450 514 6600 6811 $201,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27277BE10 500 3600 6600 508 $59,518 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB10 500 1800 6600 5010 $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25214BB10 500 1200 6600 588 $88,300 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB10 500 900 6600 5810 $106,515 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BB10 500 720 6600 6811 $184,927 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE10 500 600 6600 6811 $188,477 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27235BE10 500 514 6600 6811 $206,037 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27307BE10 600 3600 6600 5010 $69,247 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB10 600 1800 6600 5010 $66,481 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BB10 600 1200 6600 5810 $101,735 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26256BB10 600 900 6600 5810 $123,902 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26278BE10 600 720 6600 6811 $187,900 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE10 600 600 6600 6811 $201,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE10 600 514 6600 6813 $240,975 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27367BE10 700 3600 6600 5010 $70,319 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB10 700 1800 6600 5010 $68,460 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25254BB10 700 1200 6600 5810 $119,122 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26256BE10 700 900 6600 5812 $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26308BE10 700 720 6600 6811 $194,903 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE10 700 600 6600 6811 $204,522 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE10 700 514 6600 6813 $253,832 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27417BE10 800 3600 6600 5010 $75,463 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB10 800 1800 6600 588 $81,152 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26184BB10 800 1200 6600 5812 $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26306BE10 800 900 6600 5812 $139,561 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26328BE10 800 720 6600 6811 $197,987 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE10 800 600 6600 6811 $212,467 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27325BE10
ODP ENCLOSURE 60 Hertz 6600 Volt s & Part 1 Page 10 Date 900 3600 6600 5010 $76,632 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB10 900 1800 6600 5810 $86,509 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26214BB10 900 1200 6600 5812 $139,561 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26326BE10 900 900 6600 6811 $180,321 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27238BE10 900 720 6600 6811 $206,037 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27303BE10 900 600 6600 6813 $240,975 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27365BE10 1000 3600 6600 5010 $77,836 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB10 1000 1800 6600 5810 $90,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26234BB10 1000 1200 6600 5812 $145,686 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26346BE10 1000 900 6600 6811 $186,751 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27258BE10 1000 720 6600 6813 $234,542 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27343BE10 1000 600 6600 6813 $253,832 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27415BE10 1250 3600 6600 5810 $98,280 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26212BB10 1250 1800 6600 5810 $101,735 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26254BB10 1250 1200 6600 6811 $186,751 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27256BE10 1250 900 6600 6811 $199,607 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27308BE10 1250 720 6600 6813 $260,259 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE10 1500 3600 6600 5810 $106,854 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB10 1500 1800 6600 5812 $1, 0 Ball Grease Lube Self Bidirectional CG 1RA26344BB10 1500 1200 6600 6811 $199,607 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27306BE10 1500 900 6600 6813 $234,542 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27368BE10 1750 3600 6600 5810 $108,544 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB10 1750 1800 6600 5812 $147,570 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26344BB10 1750 1200 6600 6813 $228,118 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27346BE10 1750 900 6600 6813 $247,405 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27418BE10 2000 3600 6600 5812 $138,322 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26302BB10 2000 1800 6600 6811 $184,729 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27274BE10 2000 1200 6600 6813 $240,975 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27386BE10 2250 3600 6600 5812 $144,590 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB10 2250 1800 6600 6811 $196,729 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27304BE10 2250 1200 6600 6813 $247,405 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27416BE10 2500 3600 6600 6811 $188,319 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27232BE10 2500 1800 6600 6813 $216,950 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27344BE10 3000 3600 6600 6813 $194,476 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27252BE10 3000 1800 6600 6813 $229,810 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27384BE10 3500 3600 6600 6813 $224,185 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27302BE10 3500 1800 6600 6813 $236,240 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27414BE10 4000 3600 6600 6813 $237,377 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27342BE10 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.