ECL Portable/ixed Mount Mixers
The highest performance, quality range of portable mixers The Lightnin Classic L+H mixers have consistently evolved and improved through the years. These upgrades have provided our customers with improved mixer performance and enhanced process results. The new Enhanced Classic Line (ECL) portable mixer gives our customers an even stronger and more flexible product. Never before has there been a range of portable mixers offering so much quality and value. Maintenance free operation. All shaft bearings are sealed for life. Gears are synthetic grease lubricated for continuous lifetime service. ATEX and PED Certified A mixer duty motor with standard mounting allows for many speed and enclosure variations. Aluminum housing designed for high strength and low weight using inite Element Analysis. Large output shaft bearings for longer allowable shaft lengths and long life. Unique motor coupling protects the gearing from shock torque loads and increases motor bearing life. Planetary gear box. Direct drive also available. Safe positive chuck design prevents the shaft from disconnecting unless intentionally released. All hardware is captive to the chuck preventing loss. The A310 is designed to produce excellent flow and process results at less power than other axial flow impellers. Multiple bearing seals prevent leakage of lubricant. A convenient clamp indexing and locking system ensures precise, repeatable positioning for your unique application. Strong rugged clamp with slotted stabilizing wings and four point clamping for secure hold to the tank.
ECL Portable Options Rigid coupling shaft attachment with male / female pilot to ensure shaft concentricity and minimize shaft run out Tachometer can be mounted local or remote and provides a LCD of mixer output speed. A 4 to 20 ma output signal is available for process control. Variable speed control VD or Mechanical Stainless steel housing for clean applications Air motors Variable speed air motors are safe for explosive environments. They are supplied with a built in speed adjustment air control valve and an option for non-lubricated vanes. Options include air filters, lubricators, and pressure regulators. ECL Portable Motor Options Electric motors A variety of enclosures, single or three phase, multiple voltage, and severe duty options are also available. Impeller Options Lightnin is the world leader of impeller development. Using the latest computerized technology, Lightnin has produced a unique range of impellers dedicated to improving your specific process performance. Although the A310 is standard on ECL portables, there are many other impellers to satisfy your mixing requirements. Your Lightnin Sales Engineer will review your application and recommend the proper impeller. Mounting Options A inite Element Analysis designed heavy-duty clamp assembly provides maximum strength The cup plate option offers a more permanent mounting Clear index allows repeatable position our point clamp action for secure hold on tank A310 A320 A100 olding Prop R100 R500
Closed Tank Unit Rigid-removable coupling above seal for ease of maintenance. Piloted fit to minimize shaft run out. Separate bearing support minimizes shaft deflection at seal for longer life. Mechanical seal and lip seal options available. All sealing devices are completely interchangeable, allowing easy field retrofit and reducing inventory. 150 lb. ANSI flange with 316 solid stainless steel as standard. Other materials available upon request. Sealing Options Packing Lubricated, non-lubricated or food grade Single Seal Dry running, lubricated or sanitary Double Seal Dry running, lubricated or gas lift-off Seal Lubricators Provide proper lubrication of seal faces Seal Removal Pedestal Optional on 2-5 HP units to allow seal removal with mixer in-place.
The highest performance, quality range of fixed mount mixers The Lightnin Classic mixer has consistently evolved and improved through the years. These upgrades have provided our customers with improved mixer performance and enhanced process results. Open Tank Unit Maintenance free operation. All Shaft bearings are sealed for life. Gears are synthetic grease lubricated for continuous lifetime service. The new Enhanced Classic Line (ECL) fixed mount mixer gives our customers an even stronger and more flexible product. Never before has there been a range of mixers offering so much quality and value. A mixer duty motor with standard mounting allows for many speed and enclosure variations. Unique motor coupling protects the gearing from shock torque loads and increases motor bearing life. Aluminum housing designed for high strength and low weight. Planetary gear box Large output shaft bearings for longer allowable shaft lengths and long life. Multiple bearing seals prevent leakage of lubricant. Coupling guard. Rigid coupling shaft attachment with pilot fit to ensure shaft concentricity and minimize shaft run out. The A310 is designed to produce excellent flow and process results at less power than other axial flow impellers. Other impeller types available. Isolation Mounts protect drive against high fluid forces.
ECL Motor Options Electric motors A variety of enclosures, single or three phase, multiple voltage and severe duty options are also available. Air motors Variable speed air motors are safe for explosive environments. They are supplied with a built-in speed adjustment air control valve and an option for non-lubricated vanes. Options include air filters, lubricators, and pressure regulators. ECL Options Remote Tachometer provides a LCD display of mixer output speed. A 4 to 20 ma output signal is available for process control. Unit is UL Approved for hazardous locations. Variable speed control A variety of voltage and NEMA enclosure options are available. Units can be mounted locally or remote. Angle riser available on open tank units for off-center positioning of mixer. Closed tank flange options Solid alloy, 150 lb. solid stainless steel flange as standard, oversized, and sanitary. With every agitator purchase, Lightnin customers receive a product that has the built in value of years of mixing experience in almost every known fluid mixing application. B Portable ECL Gear and Direct Drive C H ø 18 4 MTG.HOLES J A D OPTIONAL AIR MOTOR L K OPTIONAL CUP PLATE E G END VIEW CLAMP ADJUSTABLE Dimensions are in mm kw A B C D E G H J K L Approx.. Weight (kg.).25-.37 550 101 151 85 127 67 134 178 51 12 87 34.75-150 650 145 185 104 130 89 143 216 51 18 102 55.3
B Open Tank ECL Gear and Direct Drive C (4) ø 16 MOUNTING HOLES (4) ø 16 MOUNTING HOLES 10 E A D OPTIONAL AIR MOTOR MIXER BASE OPTIONAL ANGLE RISER BASE G G Dimensions are in mm ADJUSTABLE kw A B C D E G Approx.. Weight (kg.).25-.37 650 101 213 85 121 102 136 63.75-150 700 145 225 104 121 114 149 86 110-400 800 196 302 104 121 140 194 124 B Closed Tank ECL Gear and Direct Drive C H- MOUNTING HOLES (8) A D OPTIONAL AIR MOTOR G E MOUNTING LANGE LANGE SIZE G H 6 ANSI-150lb 279 25.4 8 ANSI-150lb 343 25.4 DIN 150 ND16 285 22 DIN 200 ND10 340 22 Dimensions are in mm ADJUSTABLE kw A B C D E Approx.. Weight (kg.).25-.37 650 101 213 85 121 102 63.75-150 915 145 245 104 121 32 86 110-400 1000 196 305 104 121 32 144
Global Headquarters: SPX Process Equipment, Delavan, WI USA How To Contact Us: or technical details on products and services available from SPX Process Equipment, contact us at: www.spxprocessequipment.com Bran+Luebbe, Norderstedt, Werkstraße 4 D-22844 Norderstedt, Germany Phone: +49 (0) 40-522 02-0 ax: +49 (0) 40-522 02-444 Lightnin, Rochester 135 Mt. Read Blvd. Rochester, NY 14611 U.S.A. Phone +1 (585) 436 5550 ax +1 (585) 527 1742 Waukesha Cherry-Burrell, Delavan 611 Sugar Creek Rd. Delavan, WI 53115 Phone +1 (262) 728 1900 ax +1 (262) 728 4904 Your local contact Bran+Luebbe Ironstone Way Brixworth Northampton NN6 9UD Phone 01604-88 07 51 Telefax 01604-88 01 45 E-Mail info.uk@processequipment.spx.com Internet http://www.bran-luebbe.co.uk B-799 GB - 03/04