miniport LED Indoor/Outdoor : Miniport LED is slim and can be recessed into a wall or floor using a MiniPort junction box, which mounts to an octagon box or outdoor, wet-location electrical box. The fixture, with a 2.3 watt warm-white LED, features a 16 degree precise focus and tempered glass lens with a stainless steel, round beveled edge trim. The Miniport Eyelid, which should be mounted from floor, includes LFMP-, a lens film to tilt the light beam 20 degrees. Miniport LED is rated for outdoor using a wet location electrical box or indoor using a standard octagon electrical box. The aluminum housing dissipates heat and allows the LED to operate at its optimum working temperature, thus providing stable light output and long lifetime. Compatible power supplies are PS-350MA- 1W-N (powers 1 fixture) or PS-350MA-6W-N (powers up to 5 fixtures). Fixture includes 5 year warranty. 1.85" (4.7cm) Standard Version 1.85" (4.6cm) 0.08" (2mm) 1.1" (2.8cm).08" (.2cm) 2" (5cm) 0.32" (8mm) 1.85" (4.7cm) Eyelid Version 2" (5cm) 1.1" (2.8cm) 3" (7.6cm) Finish: Stainless Steel Lamp Specification: 2.3 Total Watts with driver, 12VAC LED, 300K, 82CRI, 47 lumens, 70% lumen maintenance based on 50,000 hours of operation 1.75" Diameter 1.5" (3.8cm) 4.3" (10.9cm) Indoor Octagon Junction Box supplied by electrician Dimming Information: Not Dimmable PS-350MA-1W-N 16 Power Supply: PS-350MA-1W-N 350mA 1W driver (120V input; 3.5V output) not dimmable; powers 1 Miniport LED fixture PS-350MA-6W-N 350mA 6W driver (120-277V input; 2-14V output) not dimmable; powers up to 5 Miniport LED fixtures DIST. FC 2' 60.3 7" 4' 15.1 1 6' 6.7 20" 8' 3.8 27" 10' 2.4 3 12' 1.7 41" Wet location Round Junction Box supplied by electrician Miniport Eyelid Step Lighting Wall Mounting Eyelid with LFMP-, which bends light 20 for step lighting length L W 3" 36.2 6" 6" 70.6 6.5" 9" 88.5 9" 12" 47.8 9.5" EYE LID comes with 20 Tilt Film #LFMP- Step Mounting MiniPort with Eyelid L W width 3" 41 9.5" 6" 53.2 9.5" 9" 36 10" 12" 20 9" EYE LID comes with 20 Tilt Film #LFMP- & Linear Spread Film#LFMP- LS (order seperately) 146
ps-350ma-6w-n wiring diagram ps-350ma-1w-n wiring diagram 120 vac hot (black) neutral (white) brown blue black red power supply max 5 fixtures output 3.5-17VDC (350MA) 350MA miniports + - + - + - hot (black) 120 vac neutral (white) brown blue power supply max 1 fixture power supply max 1 fixture red brown 3.5VDC (350MA) black blue + - miniport power supply max 1 fixture MiniPort LED COMPONENTS Use MiniPort Indoor or Outdoor as an uplight or step light with eyelid and lens film that refracts beam down 20 degrees. Junction Box Cover Use indoor or outdoor. MPOrt MPORT MiniPort HD ST HD Head Only DESCRIPTION Round trim ST Surface Trim EL Eyelid FINISH SS SS Stainless Steel MPort MPORT MiniPort JC JC Junction Cover Wall Floor Recessed 1W 1" (2.5cm) 1.45" (3.7cm) Driver (1W) 120V input, 350mA output is non-dimmable and powers one MiniPort. 6 watt driver with 120-277V input and 2-14V output 350mA powers up to 5 MiniPorts. ND BL Film Lenses and Filters shape beam, change color or adjust color temperatures. 25K 27K 0.98 (2.5cm) 1.77 (4.5cm) 2.36 (6cm) 6W LFMP LFMP Lens Film MiniPort type Refracts beam 20 down 25K 2500K Very Warm White 27K 2700K Very Warm White ND Neutral Density Filter dims 50% Red Film BL Blue Film LS Linear Spread PS PS Power Supply 350MA N 350MA 350 MiliAmp 1W 6W Power 1W 1 Watt 6 Watt type N Not Dimmable 147
port LED Indoor/Outdoor Hexcell Louver Step Louver : Slim and recessed, with an integral 12VAC 3.5 watt, high-powered, warm white LED, the fixture features a 16 degree precise focus, tempered glass lens with a marine-grade aluminum, round or square, beveled edge trim. The Port LED is outdoor-rated using a wet location electrical box or indoor using a standard octagon electrical box. The trim accepts dichroic color filters, which are used with PORT-LL(H). Compatible remote power supplies are TE-60L-12, T-150-12 or T-300-12. Order junction box cover, wood spring clips and remote transformer separately. Fixture includes 5 year warranty. Finish: Satin Aluminum Power Supply: TE-60L-12, T-150-12 and T-300-12 Lamp Specification: 3.51 Total Watts, 12VAC LED, 3029K, 80CRI, 95 lumens, 70% lumen maintenance based on 50,000 hours of operation. Add a warming filter to bring the color to 2500K Dimming Information: Can dim down to 30% without flickering using a low voltage electronic or magnetic dimmer. Step Lighting with PORT-LL Accessory Bends light 20 to illuminate step. Wall Mounting Silicone Ring Seal 2" Diameter 1.1" (2.8cm) (8.9cm) Wet location Round Junction Box Supplied by Electrician 0.13" (3.3mm) 1.5" (3.8cm) 2.25" (5.7cm) 4.3" (11cm) Indoor Octagon Junction Box Supplied by Electrician DIST. FC 2 328 5" 48" 91 10" 72" 40 1 96" 22 17" 120" 14 26" 14 10 28" (10.2cm) 16 4 inches 20 TILT 40 FC length L W 3" 36 3" 12" 167 21" 35 8" 30" 14 10" 39" 7 12" 48" 4 13" PORT with LF1- and Micro Louver Step Mounting L W width 3" 44 7.5" 6" 85 10" 9" 84 10.5" 12" 34 12.5" PORT with LF1-, LF1-LS and Micro Louver 2010 AWA 148
120v hot (black) 120v neutral (white) 120v 12vac remote power supply + - 12vac port Port LED COMPONENTS Use the Port LED indoor or outdoor as a general uplight or step light. Junction Box Cover Use indoor or outdoor. Spring Clip Use to recess into outdoor wooden steps or decks without junction box. POrt PORT Port HD ST HD Head Only DESCRIPTION SQ Round Square trim ST Surface Trim FINISH SA SA Satin Aluminum Lenses and Louver Complete with 20 Beam Tilt lens and Step Louver to use as step light, plus a neutral density filter. Port JC PORT Port JC Junction Cover ND BL SC SC Spring Clip WO WO Wood Dichroic Film Lenses and Filters shape beam, change color or adjust color temperatures. Louver lens holder PORT-LLH required. Wall Floor Recessed 20K LO11 port Port Port LL LL 1" Step Louver with 20 Beam Tilt Lens, Neutral Density Filter, Linear Spread Lens LLH Louver Lens Holder only LF1 LF1 Lens Film 1" diameter LO11 MR11 (use only with Hexcell) Refracts beam 20 down 20K Dichroic 2000K Very Warm White 27K Dichroic 2000K + Color Correction Film = 2700K Warm White ND Neutral Density Filter dims 50% Dichroic Red Film BL Dichroic Blue Film LS Linear Spread H Hexcell Power Supply (60W/12VAC) converts standard 120 volt line voltage to 12 volts and features builtin short-circuit protection. Fits inside an electrical junction box. Minimum dimming load is 6 watts. Dims with Lutron Diva or Skylark electronic low voltage dimmer. Remote The 150 or 300 watt 12VAC magnetic remote mount transformers convert 120V into 12V power and are protected by fast-acting circuit breakers. Dims with Lutron Diva or Skylark low voltage dimmer. TE TE Electronic 60L 60L 60 Watt LED and halogen VOLTAGE 12 T 12 12 Volt, AC T Remote Power 150 150 150 Watt 300 300 Watt Voltage/output 12 12 12 Volt Voltage Input 3 277V 60Hz Type Standard Indoor O Outdoor 149
sun 3 LED Indoor/Outdoor : The 3" round or square recessed SUN3 LED features a 16, 23, 36 or 47 degree precise focus, tempered glass lens with a marine-grade aluminum beveled edge trim. It is outdoor-rated using a wet location electrical box or indoor using a standard octagon electrical box. The trim accepts dichroic color filters which are used with SUN3-LL(H). Order junction box cover, wood spring clips and remote transformer separately. Fixture includes 5 year warranty. 1.75" (4.45cm) 3.43" (8.7cm) DIST. FC 2' 775 7" 3' 346 10" 4' 194 1 6' 86 20" 8' 49 27" 10' 32 3 16 DIST. FC 2' 404 10" 3' 180 15" 4' 101 20" 6' 45 29" 8' 25 39" 10' 16 49" 23 Finish: Satin Aluminum Lamp Specification: 6.5W, 281 Lumens, 42 Lumens per Watt, 12VAC LED, 2968K, 80CRI Power Supply: TE-60L-12 and T-150-12 T-300-12 0.13" (3.3mm) 1.5" (3.8cm) 3.25" (8.25cm) 3.85" (9.78cm) 4.3" (10.9cm) Indoor Octagon Junction Box Supplied by Electrician Dimming Information: Dims down to 9% without flickering using low voltage electronic or magnetic dimmer. 2.8" Diameter Junction Box Supplied by Electrician DIST. FC 2' 184 16" 3' 82 23" 4' 46 31" 6' 20 47" 8' 12 62" 10' 7 78" 36 DIST. FC 2' 96 21" 3' 43 31" 4' 24 42" 6' 11 63" 8' 6 8 10' 4 10 47 Step Lighting with SUN3-LL Accessory Bends light 20 to illuminate step. 4 inches 20 TILT 194 FC length L Wall Mounting W w/opposite w/opposite wall white wall black LENGTH FC FC WIDTH 3" 370 369 2" 12" 194 192 21" 12 12 7" 30" 3 2.6 13" 39" 2 0.9 1 48" 5.7 0.7 18.5" SUN3-HDL1 with LF2- and Micro Louver L W width Step Mounting 3" 159 8" 6" 182 11.5" 9" 116 11.5" 12" 49 12.3" SUN3-HDL1 with LF2-, LF2-LS and Micro Louver 2011 DESIGN JOURNAL 2011 award 2010 award 2011 award 150
120V Hot (black) 120V neutral (white) 120V 12vac remote power supply + - 12v ac sun 3 Sun3 LED COMPONENTs Use the Sun3 LED indoor or outdoor as a general uplight or step light. Junction Box Cover Use indoor or outdoor. Spring Clip Use to recess into wood steps, decks etc. without junction box. Sun3 SUN3 Sun3 HEAD/ LENS DESCRIPTION hdl1 WW HDL1 16 Degree HDL2 23 Degree HDL3 36 Degree HDL4 47 Degree Round SQ Square Color Temperature WW Warm White FINISH SA SA Satin Aluminum Lenses and Louver Complete with 20 Beam Tilt lens and Step Louver to use as step light, plus a neutral density filter. Sun3 SUN3 Sun3 JC JC Junction Cover ND BL SC SC Spring Clip WO WO Wood Film Lenses and Filters shape beam, change color or adjust color temperatures. Louver lens holder SUN3-LLH required. Wall Floor Recessed 20K LO16-H Sun3 SUN3 Sun3 LL LL 2" Step Louver with 20 Beam Tilt Lens, Neutral Density Filter, Linear Spread Lens LLH Louver Lens Holder only LF2 LF2 Lens Film 2" diameter LO16 MR16 (use only with Hexcell) Refracts beam 20 down 20K Dichroic 2000K Very Warm White 27K Dichroic 2000K + Color Correction Film = 2700K Warm White ND Neutral Density Filter dims 50% Dichroic Red Film BL Dichroic Blue Film LS Linear Spread H Hexcell Power Supply (60W/12VAC) converts standard 120 volt line voltage to 12 volts and features builtin short-circuit protection. Fits inside an electrical junction box. Minimum dimming load is 6 watts. Dims with Lutron Diva or Skylark electronic low voltage dimmer. Remote The 150 or 300 watt 12VAC magnetic remote mount transformers convert 120V into 12V power and are protected by fast-acting circuit breakers. Dims with Lutron Diva or Skylark low voltage dimmer. TE TE Electronic 60L 60L 60 Watt LED and halogen VOLTAGE 12 T 12 12 Volt, AC T Remote Power 150 150 150 Watt 300 300 Watt Voltage/output 12 12 12 Volt Voltage Input 3 277V 60Hz Type Standard Indoor O Outdoor 151
Step Halogen & LED Recessed Housing* Plaster Screen* Flange* FRONT SIDE BACK Wall (cut hole) 3.15" (8cm) Step 3.15" (8cm) 1.13" (3cm) 2.5" (6.4cm) *not used when installing in furniture, stairs, or mirrors Step wall recessed fixture features a scoop reflector and is perfect for stairs or walls. Halogen Step KIT includes: H1M Step (master) new construction housing, plaster screen, 10 watt 12 volt G4 bipin base halogen JC lamp, and a 60 watt electronic transformer that powers up to 5 H1S (slaves), which do not include transformers. LED L1M Step (master) includes, a 2 watt lamp and 60 watt LED transformer that powers up to 25 LED L1S (slaves). All LED fixtures include 5 year warranty. Body Finish Lamp Specification total wattage Satin Aluminum or White HALOGEN (H1) H1 - Jc-MS/g4/10W H1M - 10W H1S - 10W LED (L1) L1-3000K, 80 CRI, 79 lumens L1M - 3.8W (with 60W power supply) L1S - 2.2W (without power supply) Dimmer H1 - Low Voltage Electronic L1 - Low Voltage Electronic Ordering code step KIT KIT Housing & Fixture lamp H1M H1M Halogen Master H1S Halogen Slave L1M LED Master L1S LED Slave Finish sa SA Satin Aluminum WH White VOltage Frame Recessed Housing* Plaster Screen* Flange* (9cm) FRONT SIDE BACK Wall (cut hole) Frame (9cm) 1.25" (3.2cm) 2.5" (6cm) *not used when installing in furniture, stairs, or mirrors Frame wall recessed fixture is perfect for furniture, wall and mirror installations. The fixture features a silver finish with a frost white diffuser. Frame KIT includes Frame, new construction housing, plaster screen, electronic transformer and 20 watt 12 volt G4 bipin base halogen JC lamp. General light distribution. ADA compliant. Body Finish Lamp Specification total wattage Dimmer Silver HALOGEN (H) H1 - JC/G4/20W H1-20W Low Voltage Electronic Ordering code frame KIT KIT Housing & Fixture lamp H1 H1 Halogen VOltage 152
Vision 3 Wall (cut hole)* FRONT SIDE 5.75" (15cm) Metal Housing (screw to studs)* (9cm) 9.125" (23cm) Plaster Screen* Vision 3 (9cm) 3" (8cm) * *not required when installing in furniture Vision 3 square wall recessed fixture is perfect for walls and furniture. Inverse scoop reflector and body in silver finish. Vision 3 KIT includes Vision 3, housing, plaster screen, electronic transformer and 20 watt 12 volt G4 bipin base halogen JC lamp. General light distribution. Body Finish Lamp Specification total wattage Dimmer Silver HALOGEN (H) H1 - Jc/g4/20W H1-20W H1 - Low Voltage Electronic Ordering code Vision 8 vision3 KIT KIT Housing & Fixture lamp H1 H1 Halogen VOltage Wall Floor Recessed Wall (cut hole)* FRONT SIDE 5.75" (14.5cm) Metal Housing (screw to studs)* Plaster Screen* 9.25" (23.5cm) 15.25" (38cm) 15.75" (38cm) Vision 8 3.25" (8cm) 2.75" (7cm) *not required when installing in furniture Vision 8 rectangular wall recessed fixture is perfect for walls and furniture. Inverse scoop reflector and body in silver finish. Vision 8 KIT includes Vision 8, housing, plaster screen, electronic transformer and 20 watt 12 volt G4 bipin base halogen JC lamp. General light distribution. Body Finish Lamp Specification total wattage Dimmer Silver HALOGEN (H) H1 - Jc/g4/20W H1-20W H1 - Low Voltage Electronic Ordering code vision8 KIT KIT Housing & Fixture lamp H1 H1 Halogen VOltage 153