Mobile Column Lift EHB 707 Standard
Mobile and universal use, indoors and outdoors. Practical and easy maneuverability of every column, short set-up time and fast lifting speed. Maximum safety utilizing double load securing with automatic hydraulic and mechanic all position locks, fully synchronized control and supervision of all columns. Reliable hydraulic drive, self-lubricating, totally insensitive to moisture, dirt and sand, minimum maintenance required. Adjustable forks, no adapters required Unique ram design; protected within columns Control unit at every column, pluggable circuit boards Easy to move by one person Short-distance cable connection; in a circuit around the vehicle Technical data - EHB707: 7.2 t per column Wheel forks: Adjustable for wheels up to 22.5 Ø = 550-1140 mm Length of fork 300 mm Lifting stroke: 1700 mm (effective) Lifting/lowering time: approx. 115 sec. Drive: Electro-hydraulic Connection: 400V / 3Ph / 50Hz / 16A Control: With hydraulic seat valves Load securing: Hydraulic and mechanical locks Operation: From each column / Up / Down / All / Single Cable connection: 10 m power supply cable, 10 m interconnecting cables per column, plug at 1 end, closed circuit Travelling device: Spring-loaded wheel jack at rear wheels, fixed front wheels, at each column Protection class: IP65 Colour: Orange RAL2004 info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 02/2012
Technical Specifications Model / capacity Load support Lifting stroke Lifting/lowering time Operation Control Drive Connection Positioning wheels Dimensions Weight Protection class IP 65 Safety features EHB707V11-4 Standard: 4 x 7.2 t = 28.8 t (1 master, 3 slave columns) EHB707V11-6 Standard: 6 x 7.2 t = 43.2 t (1 master, 5 slave columns) Adjustable wheel fork for wheels 155R13-13R22.5, Ø 550-1140 mm Length of fork 300 mm 1700 mm (effective) approx. 115 sec. Up / Down from each column Operation modes: All / Single 10 m power supply cable at master column 10 m interconnecting cables, plug at 1 end, closed circuit Max. 6 columns per lift set (optional: extendable with Amplifier Box) Synchronization of columns, increment control, height tolerance of max. 3 mm Automatic safety stop activates at 25 mm increments Control voltage 24V DC Electro-hydraulic Motor 1.1 KW per column Hydraulic cylinder self-lubricating, cylinder rod encased within a steel tube Gravity lowering without motor, energy-saving 400 V / 3 Ph / 50 Hz, fuse 16 A Rear: wheel jack, spring-loaded, with locking brake Front: fixed wheels Ø 125 mm with sealed roller bearings 1160 x 1100 x 2250 mm (l x w x h) per column Front leg height of 155 mm 500 kg per column Safety standards CE, EN 1493 Double load securing by hydraulic and mechanical locks Pressure relief valve preventing overload Emergency stop at each column info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 02/2012
Advantages + mobility - portable columns, easy to move by one person, use indoors or outdoors, no installation + above floor - free access to vehicle, adjustable working height, good visibility, ergonomic working place + simple use - for all types of vehicles, lifting at tyres without difficult adjustments + multi-operation - lifts can be used for several vehicles when placed on support stands + space saving - columns can be put aside, little space required + versatile use - ideal for service, maintenance and repair + space optimising - work place not restricted by stationary lifts or pits + extendable - any quantity of columns, various accessories available, such as drive-on ramps etc. info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012
Advantages Compact column modern design - light, slim and low, without top-heavy motor closed lift pillar - rigid, solid and torsion-resistant small turning radius - by bevelled base frame large load overhang - for maximum safety distance between lift pillar and vehicle Adjustable wheel forks easily adjustable - for different wheel sizes from 13 up to 22.5 (Ø 550 1140 mm) no wheel adaptors for smaller wheel sizes no separate wheel adaptors required Rugged low-maintenance hydraulic drive Ideal for heavy loads hydraulics with a direct acting cylinder qualifies as the most efficient drive to lift heavy loads Long service life nearly maintenance-free by self-lubrication; without metal friction Waterproof insensitive to water, dust, dirt Protected cylinder integral to column, hydraulic cylinder encased within a steel tube Gravity lowering energy saving and quiet info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012
Advantages Double Load Protection for safe working underneath the lifted load hydraulic safety check valve securing load at any height mechanical - automatic all position lock with safety catch, is opened by solenoid only for lowering Large safety clearance large clearance - between wheel stop and lift pillar. Maximum safety even if air suspension of the lifted vehicle fails or at flat tyre Control FINKBEINER synchronisation control - for synchronized lifting and lowering of all columns even with different loads. Due to the fine regulation with tolerance of only 3 mm, the vehicle cannot swing FINKBEINER continuous monitoring - of all operational functions sturdy control electromechanical safety relay direct operation - from any column, Up / Down / E-stop control of 6 - only one power supply for a set of 6 (1 master, 5 slaves) simple fault diagnosis - no specialist required, simple and reliable control with replaceable circuit boards no limit switches - required for cylinder travel info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012
Advantages Portable column lift mobile easy to move by one person wheel jack at each column adjustable in height; locking brake preventing unintentional movement of column, fixed wheels at the front retractable spring loaded wheels rear wheels self-retract under load; the column is automatically mobile when unloaded; no need for troublesome handling small and mobile narrow turning radius, convenient in restricted areas Quick short-distance cable connection Ready for operation short set-up time short distances, interconnect cables from column to column in a circuit around the vehicle free working area - no cables within the working area underneath the vehicle energy-saving only one power cable even for set of 6 columns plug and work - columns transported standing upright, immediately ready for operation after removal of packaging (no filling of hydraulic oil) fully tested - load and functional tests conducted at the manufacturer After-sales-service Customer satisfaction - s top goal Minimum service costs - by wear-resistant design and highest quality info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012
Accessory Ramps FA25 (Art.-No. FA2080000) Platform length: Platform width: Platform height: Weight: 25 t 8900 mm 700 mm 250 mm 4200 kg Use: Delivery: with 4 columns EHB707 2 platforms, 2 ascending ramps (fixed on floor), 2 cross beams info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012
Accessory Truck Crossbeam TRE15 (Art.-No. TR7065000) Crossbeam Adaptor TA15 Accessory for Truck Crossbeam TRE15 (Art.-No. TRE8075100001) Length: Support height: Weight: Use: Delivery: 15 t 3200 mm 215-418 mm 260 kg For wheel-free lifting of vehicles at the frame, to be used together with 2 columns EHB Incl. 2 rubber pads, 2 extension tubes Support height: Use: 15 t 1100 mm To lift trailers at king pin, max. Ø 120 mm, to mount onto crossbeam TRE15 info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012
Accessory Wheel Carriage RW for easily mounting or dismounting of wheels, also for twin wheels. RW 7.06 RW 5.16 Lifting Height: Wheel Diameter: Drive: 700 kg 660 mm 600-1500 mm hydraulic pump Lifting Height: Wheel Diameter: Drive: 500 kg 1600 mm 500-1800 mm manual winch Platform Lift FI2 Gear Box Lift GTR2B Lifting height: Platform size: Drive: Connection: Operation: Travelling device: Colour: 2 t 460-1460 mm 1500 x 800 mm Electro-hydraulic 400V / 50Hz / 3Ph / 16A Hand set, up/down/e-stop 2 fixed, 2 guide wheels Turquoise RAL5018 Stroke: Lifting height: Load support: Drive: Connection: Travelling device: Colour: 2 t 1100 mm 830-1930 mm Pluggable disc Pneumatic idle run, manually under load Compressed air 6 bar 4 guide wheels Grey RAL7015 Accessory: Swivel Plate GP1B for gear box lift GTR2B Dimension: 530 x 380 mm Decline: Adjustable +/- 12 Delivery: incl. rubber supports and belts info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012
Accessory Support stands for heavy duty vehicles info@finkbeiner.eu. www.finkbeiner.eu Technical changes reserved. 01/2012