Material Handling Machine LH 11 Port Operating Weight: 1, 12, kg Engine: 3 kw / 48 HP Stage IV Stage IIIA System Performance: 463 kw
The Perfect Solution for Every Application H85 Shells for loose material H151 Anbaugerät Greifer GMH 12 25.6.215 H84 übergreifend Multi-tine grab H84 H874 Straight boom Wood grab H875 Straight stick Load hook H873 Angled boom Magnet devices Working Tools 2 LH 11 Port Litronic Sticks Booms
Cab Elevations H1353 H1352 H1354 Rigid cab elevation Hydraulic cab elevation Uppercarriage Turret Elevations Mobile Undercarriage Crawler LH 11 Port Litronic 3
Material Handling Machines Overview Uppercarriage 2-circuit Liebherr-Synchron-Comfort-system (LSC) with LUDV technology for faster working speed at minimum fuel consumption 3 kw engine output and high pump flow for fast work cycles, convincing dynamics and maximum handling performance Electrical pilot control enables individual settings for the operator and new options such as load torque limitation Reduction in operating costs thanks to built-in maintenance advantages and optimum service accessibility Optimised hydraulics with closed slewing mechanism circuit for greater fuel efficiency and faster work cycles Undercarriage Central lubrication system manually centralised or automatically for more productive working time at mobile undercarriage Large footprint for high stability and maximum lift capacities Variety of undercarriage variants for different applications available Low service costs thanks to travel drive without gearbox and cardan shafts at mobile undercarriage 4 LH 11 Port Litronic
Attachment High lift capacities and long reaches thanks to weight-optimised design for more handling capacity Energy recovery cylinder filled with nitrogen for maximum efficiency through less fuel consumption at more handling capacity Pipe fracture safety valves on hoist and stick cylinders and retract stick shut-off for maximum safety during every application Electro-hydraulic end position control extends the service life of the components Quick coupling systems and working tools made by Liebherr for maximum machine capacity utilisation and greater handling performance Operator s Cab Hydraulic cab elevations for always the best view downwards as well as forwards Less strain on the operator, workers and reduced environmental pollution due to lower noise emissions Optimum visibility thanks to large glass surfaces and standard rear and side area monitoring with camera Joystick steering without steering column as standard for convenient operation, greater legroom and clear view of the working area at mobile undercarriage Proportional control as standard with 4-way minijoystick for greater precision, highprecision control and functions LH 11 Port Litronic 5
Technical Data Diesel Engine Rating per ISO 9249 Model Type Bore / Stroke Displacement Engine operation Air cleaner Engine idling Electrical system Voltage Batteries Alternator Stage IV Harmful emissions values Emission control Fuel tank Urea tank Stage IIIA Harmful emissions values Fuel tank Hydraulic System 3 kw (48 HP) at 1,8 RPM Liebherr D946 6 cylinder in-line 13 / 15 mm 11.95 l 4-stroke diesel Common-Rail turbo-charged and after-cooled reduced emissions dry-type air cleaner with pre-cleaner, primary and safety elements sensor controlled Hydraulic pump for attachment and travel drive Max. flow Max. pressure for swing drive 24 V 2 x 18 Ah / 12 V three-phase current 28 V / 14 A Hydraulic tank Hydraulic system Hydraulic oil filter in accordance with 97/68/EG stage IV Liebherr-SCR technology 1,35 l 18 l MODE selection in accordance with 97/68/EG stage IIIA 1.35 l S (Sensitive) Max. flow Max. pressure Hydraulic pump regulation and control E (Eco) Cooling System Diesel engine water-cooled cooling system, consisting of a cooling unit for water and charge air and a 2nd cooler for hydraulic oil, each with an infinitely variable, thermostatically controlled fan drive system Hydraulic Controls Power distribution Servo circuit Attachment and swing Chassis Additional functions Proportional control 6 LH 11 Port Litronic via control valves with integrated safety valves, simultaneous actuation of chassis and attachment. Swing drive in separate closed circuit with electro-hydraulic pilot control and proportional joystick levers with electric proportionally functioning foot pedals or adjusted with plugable levers via switch or electroproportional foot pedals proportionally acting transmitters on the joysticks for additional hydraulic functions P (Power) P (Power-Plus) Engine speed and performance setting Option 2 Liebherr axial piston variable displacement pumps (double construction) 2 x 462 l/min. 35 bar reversible axial piston variable displacement pump, closed-loop circuit 355 l/min. 37 bar 2 circuit Liebherr-Synchron-Comfort-system (LSC) with electronic engine speed sensing regulation, pressure and flow compensation, automatic oil flow optimizer 455 l 1,175 l 2 main return filters with integrated partial micro filtration (5 µm) adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for especially economical and environmentally friendly operation or for maximum material handling and heavy-duty jobs mode for precision work and lifting through very sensitive movements mode for especially economical and environmentally friendly operation mode for high performance with low fuel consumption mode for highest performance and for very heavy duty applications, suitable for continuous operation stepless alignment of engine output and hydraulic power via engine speed Tool Control: ten preadjustable pump flows and pressures for add on tools Swing Drive Drive Swing ring Swing speed Swing torque Holding brake Liebherr axial piston motor in a closed system, L iebherr planetary reduction gear Liebherr, sealed race ball bearing swing ring, internal teeth 6.5 RPM stepless 2 knm wet multi-disc (spring applied, pressure released)
Operator s Cab Cab safety cab structure with fixed built-in front and roof window made from impact-resistant laminated safety glass, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock- absorbing suspension, sounddamping insulating, tinted laminated safety glass, separate shades for the sunroof window and windscreen Operator s seat Comfort Option Premium Control system Operation and displays Air-conditioning air cushioned operator s seat with 3D-adjustable armrests, headrest, lap belt, seat heater, adjustable seat cushion inclination and length, lockable horizontal suspension, automatic weight adjustment, adjustable suspension stiffness, pneumatic lumbar vertebrae support and passive seat climatisation with active coal in addition to operator s seat comfort: active elec tronic weight adjustment (automatic readjustment), pneumatic low frequency suspension and active seat climatisation with active coal and ventilator joysticks with arm consoles and swivel seat, folding left arm console large high-resolution operating unit, selfexplanatory, colour display with touchscreen, video-compatible, numerous setting, control and monitoring options, e.g. air conditioning control, fuel consumption, machine and tool parameters automatic air-conditioning, recirculated air function, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; recirculated air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme out-side temperatures, sensors for solar radiation, inside and outside temperatures Undercarriage Mobile Versions Drive Travel speed Joystick steering Driving operation Axles Service brake Holding brake Stabilization Crawler Versions Drive Travel speed Brake Holding brake Track pads Type Hydraulic cylinders Energy recovering cylinder Bearings weight-optimised design for bulk and general cargo handling at optimal handling capacity. Complex and stable mountings of attachment and cylinders Liebherr cylinders with special seal system as well as shock absorption Liebherr gas cylinder with special sealing and control system sealed, low maintenance 5. km/h stepless (creeper speed) 8. km/h stepless automotive driving using accelerator pedal, cruise control function: storage of variable accelerator pedal positions 9 t drive axles; manual or automatic hydraulically controlled front axle oscillation lock two circuit travel brake system with accumulator; wet and backlash-free disc brake wet multi-disc (spring applied, pressure released) 4 point outriggers, High Rise Liebherr compact planetary reduction gear with Liebherr axial piston motor per side of undercarriage 2.6 km/h stepless (creeper speed) 4. km/h stepless functional brake valves on both sides wet multi-disc (spring applied, pressure released) flat Complete Machine Lubrication Option Mobile Steps system Attachment Standard, High Rise one driven axle with transmission with Liebherr axial piston motor and functional brake valve on both sides Noise emission ISO 6396 2/14/EC Liebherr central lubrication system for uppercarriage and attachment, automatically Liebherr central lubrication system for undercarriage, automatically safe and durable access system with anti-slip steps main components hot-galvanised L pa (inside cab) = 71 db(a) LWA (surround noise) = 17 db(a) LH 11 Port Litronic 7
LH 11 C Dimensions Port 4746 471 6429 3811 1237 4384 4279 3419 1786 138 571 H1265 3526 75 786 8152 8784 54 615 6672 LH 11 C Cab Elevation Cab Elevation LHC (Hydraulic Elevation) 2986 2836 7849 7332 4279 3761 H1264 Increase type LHC 36-5 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any time within the stroke. 8 LH 11 Port Litronic
LH 11 C HR Dimensions Port 4746 471 6896 3811 1471 6384 6279 5419 3786 138 571 H1258 3526 75 786 8152 8784 54 615 6672 LH 11 C HR Choice of Cab Elevation Cab Elevation LHC (Hydraulic Elevation) Cab Elevation LHC-D (Hydraulic Elevation) 2986 2836 9849 9332 727 6281 4481 3138 1127 9145 8483 6279 5761 6384 5419 541 5382 3786 2583 H1257 Increase type LHC 36-5 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any time within the stroke. H1257 Increase type LHC-D 73 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any time within the stroke. LH 11 Port Litronic 9
LH 11 M Dimensions Port 4746 471 4489 3811 4886 4781 3922 2289 564 118 1915 22 44 488 65 75 LH 11 M Cab Elevation Cab Elevation LHC (Hydraulic Elevation) 2973 2823 8352 7842 4781 4271 H1272 Increase type LHC 36-5 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any time within the stroke. Tyres 28.-25 1 LH 11 Port Litronic H1273 1915 44 823 8816
LH 11 M HR Dimensions Port 4746 471 5454 3811 75 6886 5922 6781 4289 159 1915 25 564 H1269 1915 5 883 9116 44 4866 679 779 LH 11 M HR Cab Elevation Cab Elevation LHC (Hydraulic Elevation) 2973 2823 1352 9842 6781 6271 H1268 Increase type LHC 36-5 The hydraulically adjustable cab allows the driver, that he can choose his field of view freely and at any time within the stroke. Tyres 28.-25 LH 11 Port Litronic 11
LH 11 C Attachment GG23 Port Kinematic 2A 85 26 8 24 75 7 2 6 18 5 45 4 12 3 25 2 6 1 5-2 -15-6 -25-8 -35 ft H1263 184 17-4 -2-3 2 11-1 -12 m 26 24 22 2 18 16 14 12 1 8 6 4 2 85 8 75 7 65 6 55 5 45 4 35 3 25 2 15 1 5 6. m m 25.5 24. 22.5 21. 19.5 18. 16.5 15. 13.5 12. 1.5 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 6. 7.5 4384 395 4-5 -1 19,9 kg 75 mm on request Dimensions 1 8 15 Weight Pad width Ground pressure 16 14 35 The operating weight includes the basic machine with hydr. cab elevation, straight boom 13. m, straight stick 1.5 m and grab model GMZ 12 / 6. m3 shells for loose material. 22 65 55 Operating Weight and Ground Pressure H1262 7.5 m 9. m 1.5 m 15 m ft 12. m 13.5 m 15. m 16.5 m 18. m 19.5 m 21. m 22.5 m 24. m m Undercarriage Height 16.9* 16.9* 2 3 17.* 7.6* 2 3 17.* 7.6* 24.2* 2 3.8* 32.7* 24.7* 16.6* 15.3* 24.2* 2 3.8* 32.7* 24.7* 16.6* 15.3* Can be slewed through 36 21.8* 22.9* 24.2* 25.5* 26.8* 27.7* 2 28.* 24.5* 23.6* 23.9* 21.8* 22.9* 24.2* 25.5* 26.8* 27.7* 2 28.* 24.5* 23.6* 23.9* 17.3* 17.3* 1 1 17.* 16.5* 16.2* 16.1* 16.1* 16.2* 16.5* 1 1 16.9* 1 1 17.3* 2.1* 2.1* 1 21.* 21.* 18.5* 21.9* 21.9* 1 22.7* 22.7* 19.8* 23.4* 23.4* 2.2* 23.8* 23.8* 2.5* 23.8* 23.8* 2.6* 23.4* 23.4* 2.3* 22.5* 22.5* 1 2.9* 2.9* 18.3* 17.* 16.5* 16.2* 16.1* 16.1* 16.2* 16.5* 16.9* 17.3* 1 18.5* 1 19.8* 2.2* 2.5* 2.6* 2.3* 1 18.3* 15.3* 15.* 14.9* 14.9* 14.9* 16.2* 16.6* 17.1* 17.5* 17.8* 1 1 17.8* 17.2* 16.1* In longitudinal position of undercarriage 15.3* 15.* 14.9* 14.9* 14.9* 16.2* 16.6* 17.1* 17.5* 17.8* 1 1 17.8* 17.2* 16.1* 14.3* 13.9* 13.8* 13.9* 14.8* 15.7* 16.* 16.1* 16.* 15.2* 14.3* 13.9* 13.8* 13.9* 14.8* 15.7* 16.* 16.1* 16.* 15.2* 13.2* 13.2* 13.4* 13.8* 14.3* 14.4* 14.2 14. 13.4* 13.2* 13.2* 13.4* 13.8* 14.3* 14.4* 14.3* 13.4* Max. reach 12.8* 13. 12.8 12.6 12.4 12.8* 11.8 11.6 11.4 11.2 12.* 1.9 1.8 1.6 1.5 1.3 1.2 1.1 1.2* 9.6 1.2* 9.5 9.4 9.4 9.3 8.5* 8.5* 15.9* 13.4* 12.* 9.8* 9.2 9. 8.9 8.9 15.9* 13.4* 12.* 9.8* 9.* 9.4 12.3 14.4 16.2 17.6 18.8 19.8 2.6 21.3 21.9 22.4 22.7 23. 23.1 23.1 23.1 22.9 22.7 22. 2.7 18.8 14.3 * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in metric tons (t) and can be slewed through 36 on a firm, level supporting surface. Capacities are valid for 75 mm wide flat pads. Indicated loads based on the ISO 1567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity values indicated are attained at the corresponding operating temperature. This operating temperature is ensured by continuous movement of the boom. Weights of fitted working tools (grabs, load hooks, etc.) and load accommodation equipment are to be deducted from the lift capacity values. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook. In accordance with the harmonised European Standard EN 474-5, hydraulic excavators used for lifting operations must be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. 12 LH 11 Port Litronic
LH 11 C HR Attachment AG24 Port Kinematic 2D 9 28 85 26 8 24 75 7 2 6 18 5 14 4 12 3 8 2 6 1 5-5 -1-15 H1256 76-4 -8 185-1 -4-12 -45 ft -14 m 26 24 22 2 18 16 14 12 1 8 6 4 2 85 8 75 7 65 6 55 5 45 4 35 3 25 2 15 1 5 6. m m 6348-2 -25 25.5 24. 22.5 21. 19.5 18. 16.5 15. 13.5 12. 1.5 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 6. 7.5 725 2-6 -35 Dimensions 4-2 -3 117,6 kg 75 mm on request 1 25 15 Weight Pad width Ground pressure 16 45 35 The operating weight includes the basic machine with hydr. cab elevation, angled boom 13. m, straight stick 12. m and grab model GMZ 12 / 6. m3 shells for loose material. 22 65 55 Operating Weight and Ground Pressure H1255 7.5 m 9. m 1.5 m m ft 12. m 13.5 m 15. m 16.5 m 18. m 19.5 m 21. m 22.5 m 24. m m Undercarriage Height 3.7* 34.7* 23.1* 12.7* 3.7* 34.7* 23.1* 12.7* 24.7* 27.2* 2 2 21.7* 19.* 1 18.* 18.4* 24.7* 27.2* 2 2 21.7* 19.* 1 18.* 18.4* Can be slewed through 36 1 2.8* 22.4* 24.* 25.3* 26.3* 27.* 27.2* 25.8* 25.4* 24.7* 1 2.8* 22.4* 24.* 25.3* 26.3* 27.* 27.2* 25.8* 25.4* 24.7* 16.9* 18.* 1 2.3* 21.3* 22.1* 22.7* 22.9* 22.8* 22.3* 21.3* 16.9* 18.* 1 2.3* 21.3* 22.1* 22.7* 22.9* 22.8* 22.3* 21.3* 14.3* 16.* 16.8* 17.7* 18.4* 19.* 1 19.8* 19.7* 1 18.5* 14.3* 16.* 16.8* 17.7* 18.4* 19.* 1 19.8* 19.7* 1 18.5* 12.* 12.* 13.7* 13.7* 14.4* 14.4* 15.* 15.* 15.7* 15.7* 16.3* 16.3* 16.8* 16.8* 15.* 17.1* 17.1* 15.3* 17.3* 17.3* 17.3* 17.3* 17.* 17.* 15.* 16.3* 16.3* 14.4* In longitudinal position of undercarriage 15.* 15.3* 15.* 14.4* 1.7* 12.1* 13.2* 13.7* 13.8* 13.7* 13.4* 12.7* 1.7* 12.1* 13.2* 13.7* 13.8* 13.7* 13.4* 12.7* Max. reach 1.2* 1.7* 12.1* 12.* 11.2* 1.2* 1.7* 12.1* 12.* 11.2* 9.7* 9.8* 11.2* 9.7* 9.8* 11.2* 9.8* 9.8* 9.7* 9.7* 9.7* 8.3* 8.* 8.* 8.3* 9.1 9.7* 8.3* 8.* 8.* 8.3* 11.9 14.2 16. 17.6 18.8 19.9 2.8 21.6 22.2 22.7 23.2 23.5 23.7 23.8 23.8 23.7 23.5 23.2 22.8 22.4 21.7 2.8 18.5 * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in metric tons (t) and can be slewed through 36 on a firm, level supporting surface. Capacities are valid for 75 mm wide flat pads. Indicated loads based on the ISO 1567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity values indicated are attained at the corresponding operating temperature. This operating temperature is ensured by continuous movement of the boom. Weights of fitted working tools (grabs, load hooks, etc.) and load accommodation equipment are to be deducted from the lift capacity values. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook. In accordance with the harmonised European Standard EN 474-5, hydraulic excavators used for lifting operations must be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH 11 Port Litronic 13
LH 11 M Attachment GG25 Port Kinematic 2A 9 85 8 75 7 65 6 55 5 45 4 35 3 25 2 15 1 5-5 -1-15 -2-25 -3-35 -4 ft 28 Operating Weight H127 26 The operating weight includes the basic machine with 4 point outriggers, hydr. cab elevation, 4 solid tyres, straight boom 13. m, straight stick 12. m and grab model GMZ 12 / 6. m3 shells for loose material. 24 22 2 Weight 14, kg 18 16 Dimensions 14 12 1 8 4886 445 6 4 2 H1271 184-2 17-4 -6 125-8 -1 15-12 -14 m 28 26 24 22 2 18 16 14 12 1 8 6 4 2 m 9 85 8 7 65 6 55 5 45 4 35 3 25 2 15 1 5 ft 6. m m Undercarriage 27. 25.5 24. 22.5 21. 19.5 18. 16.5 15. 13.5 12. 1.5 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 6. 7.5 Height 7.5 m 9. m 1.5 m 12. m 13.5 m 15. m 16.5 m 18. m 19.5 m 21. m 22.5 m 24. m m 34.6* 39.8* 34.6* 39.8* 21.9* 2 31.2* 32.8* 22.5* 17.3* 16.4* 21.9* 2 31.2* 32.8* 22.5* 17.3* 16.4* Can be slewed through 36 16.5* 16.5* 13.8* 13.8* 16.3* 16.3* 14.3* 14.3* 15.9* 15.9* 15.6* 15.6* 14.4* 16.* 16.* 14.7* 18.3* 18.3* 16.5* 16.5* 2.4* 2.4* 1 1 17.1* 17.1* 15.5* 23.* 23.* 2.* 2.* 17.8* 17.8* 16.* 24.4* 24.4* 21.* 21.* 18.4* 18.4* 16.5* 25.7* 25.7* 21.9* 21.9* 1 1 17.* 26.8* 26.8* 22.7* 22.7* 19.7* 19.7* 17.4* 27.6* 27.6* 23.3* 23.3* 2.1* 2.1* 17.7* 2 2 23.5* 23.5* 2.3* 2.3* 17.8* 27.6* 27.6* 23.4* 23.4* 2.2* 2.2* 17.7* 24.9* 24.9* 22.9* 22.9* 19.8* 19.8* 17.4* 24.2* 24.2* 21.7* 21.7* 1 1 16.6* 22.8* 22.8* 1 1 17.5* 17.5* In longitudinal position of undercarriage 14.4* 14.7* 15.5* 16.* 16.5* 17.* 17.4* 17.7* 17.8* 17.7* 17.4* 16.6* 13.3* 13.2* 13.3* 13.9* 14.9* 15.3* 15.6* 15.7* 14.7* 13.3* 13.2* 13.3* 13.9* 14.9* 15.3* 15.6* 15.7* 14.7* 13.4* 13.9* 13.7* 13.4* 13.9* 13.7* Max. reach 1.7* 12.* 12.7* 12.8* 12.8* 1.2* 1.7* 12.* 12.7* 12.8* 12.8* 1.2* 9.7* 11.2* 11.5* 9.7* 11.2* 11.5* 1.7* 1.7* 1.7* 9.8* 9.8* 1.7* 9.* 8.7* 8.3* 7.6* 9.* 8.7* 8.3* 7.6* 13.3* 9.* 8.7* 8.4* 8.* 8.* 7.5* 7.4* 13.3* 9.* 8.7* 8.4* 8.* 8.* 7.5* 7.4* 1.7 13.4 15.5 17.2 18.6 19.8 2.9 21.7 22.5 23.1 23.6 24. 24.3 24.5 24.6 24.6 24.5 24.3 24. 23.4 22.3 2.7 18.2 * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / 15 ) are specified over the rigid axle with the stabilizers down. Indicated loads based on the ISO 1567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity values indicated are attained at the corresponding operating temperature. This operating temperature is ensured by continuous movement of the boom. Weights of fitted working tools (grabs, load hooks, etc.) and load accommodation equipment are to be deducted from the lift capacity values. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook. In accordance with the harmonised European Standard EN 474-5, hydraulic excavators used for lifting operations must be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. 14 LH 11 Port Litronic
LH 11 M HR Attachment AG25 Port Kinematic 2D 95 9 85 8 75 7 65 6 55 5 45 4 35 3 25 2 15 1 5-5 -1-15 -2-25 -3-35 -4-35 ft 3 Operating Weight H1266 28 The operating weight includes the basic machine with 4 point outriggers, hydr. cab elevation, 4 solid tyres, angled boom 14.5 m, straight stick 12. m and grab model GMZ 12 / 6. m3 shells for loose material. 26 24 22 Weight 2 111,7 kg 18 16 Dimensions 14 12 1 8 72 6 6886 4 2 H1267 865-2 2-4 -6-8 -1-12 -14 m 28 26 24 22 2 18 16 14 12 1 8 6 4 2 m 9 85 8 75 7 65 6 55 5 45 4 35 3 25 2 15 1 5 ft 6. m m Undercarriage 27. 25.5 24. 22.5 21. 19.5 18. 16.5 15. 13.5 12. 1.5 9. 7.5 6. 4.5 3. 1.5 1.5 3. 4.5 6. 7.5 Height 7.5 m 9. m 1.5 m 12. m 13.5 m 15. m 16.5 m 18. m 19.5 m 21. m 22.5 m 24. m m 3.9* 31.* 8.5* 3.9* 31.* 8.5* 22.5* 24.5* 26.4* 2 17.4* 13.2* 13.7* 14.4* 22.5* 24.5* 26.4* 2 17.4* 13.2* 13.7* 14.4* Can be slewed through 36 19.* 2.3* 21.6* 22.8* 23.9* 24.3* 2.2* 1 1 1 18.5* 19.* 2.3* 21.6* 22.8* 23.9* 24.3* 2.2* 1 1 1 18.5* 15.7* 16.5* 17.4* 18.3* 1 2.* 2.6* 21.1* 21.3* 21.2* 2.8* 2.* 18.7* 15.7* 16.5* 17.4* 18.3* 1 2.* 2.6* 21.1* 21.3* 21.2* 2.8* 2.* 18.7* 15.3* 15.9* 16.6* 17.2* 17.7* 1 18.3* 18.3* 18.* 17.4* 16.5* 15.3* 15.9* 16.6* 17.2* 17.7* 1 18.3* 18.3* 18.* 17.4* 16.5* 12.7* 15.5* 16.* 16.* In longitudinal position of undercarriage 12.7* 15.5* 16.* 16.* 12.7* 13.8* 13.7* 12.7* 13.8* 13.7* 1.2* 1.7* 12.8* 12.8* 1.2* 1.7* 12.8* 12.8* Max. reach 9.8* 1.2* 1.7* 11.5* 11.5* 9.8* 1.2* 1.7* 11.5* 11.5* 9.* 9.* 9.7* 1.2* 9.8* 9.* 9.* 9.7* 1.2* 9.8* 8.5* 8.5* 8.5* 8.7* 8.5* 8.5* 8.5* 8.7* 8.3* 8.3* 8.4* 8.5* 8.7* 8.3* 8.3* 8.4* 8.5* 8.7* 8.* 8.* 8.* 8.* 13. 15.2 9.* 9.* 17.1 18.6 8.3* 8.3* 19.9 2.9 8.* 8.* 21.9 22.7 23.4 23.9 7.8* 7.8* 24.4 7.8* 7.8* 24.7 7.8* 7.8* 25. 7.8* 7.8* 25.1 7.8* 7.8* 25.2 7.8* 7.8* 25.2 7.8* 7.8* 25.1 7.8* 7.8* 24.9 7.8* 7.8* 24.6 7.8* 7.8* 24.2 7.8* 7.8* 23.7 7.7* 7.7* 23.1 21.9 19.3 * Limited by hydr. capacity The lift capacities on the stick end without attachment are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 36 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage ( / 15 ) are specified over the rigid axle with the stabilizers down. Indicated loads based on the ISO 1567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity. The lift capacity values indicated are attained at the corresponding operating temperature. This operating temperature is ensured by continuous movement of the boom. Weights of fitted working tools (grabs, load hooks, etc.) and load accommodation equipment are to be deducted from the lift capacity values. The lift capacity of the unit is limited by its stability, the lifting capability of the hydraulic elements, or the maximum permissible lifting capacity of the load hook. In accordance with the harmonised European Standard EN 474-5, hydraulic excavators used for lifting operations must be equipped with pipe fracture safety valves, an overload warning device, a load hook and a lift capacity chart. LH 11 Port Litronic 15
Kinematic Variants Kinematic Variant 2A Hole A 2A H1259 Hole 2 Energy recovery with kinematic variant 2A Kinematic Variant 2D / 2C Hole C Hole D 2C 2D H126 H1261 Hole 2 Hole 2 Energy recovery with kinematic variant 2C Energy recovery with kinematic variant 2D 2D 2C Altered range curve with additional reach depth, e.g. for unloading from ships 16 LH 11 Port Litronic
Working Tools Shells for Loose Material Grab model GMZ 5 Width of shells mm Capacity m3 Loose material, specific weight up to t/m3 Weight kg Grab model GMZ 8 Width of shells mm Capacity m3 Weight kg Grab model GMZ 12 Width of shells mm Capacity m3 Weight kg H151 Multi-Tine Grab Shells for loose material with cutting edge (without teeth) 1,4 3.5 1.1 2,695 1,6 4. 1.1 2,83 1,8 4.5 1.1 2,95 2, 5. 1.1 3,35 2,2 5.5 1.1 3,17 2,4 6. 1.1 3,3 1,3 3. 2,515 1,5 3.5 2,63 1,75 4. 2,775 2, 4.5 2,92 2,2 5. 3,4 2,6 6. 3,275 1,6 4. 3,4 1,8 4.5 3,135 2, 5. 3,295 2,2 5.5 3,425 2,4 6. 3,545 2,8 7. 3,825 3,2 8. 4,1 closed Grab model GMM 8-5 (5 tines) Capacity m3 1.1* Weight kg 2,44 Grab model GMM 12-5 (5 tines) Capacity m3 1.7 * heart-shaped H84 3,2 8. 1.1 3,83 1.4* 2,58 1.7* 2,74 2. 2.5 3. Wood Grab Grab model GMH 5 round-shaped (overlapping, horizontal cylinders) Size m2 2.5 2.5 Cutting width mm 87 1, Height of grab, closed mm 2,52 2,531 Weight kg 2,115 2,19 Grab model GMH 8 round-shaped (complete overlapping, vertical cylinders) Size m2 1.6 1.9 Cutting width mm 87 87 Height of grab, closed mm 3,22 3,332 Weight kg 2,195 2,24 Grab model GMH 12 round-shaped (complete overlapping, vertical cylinders) Size m2 2.8 3.2 Cutting width mm 87 87 Height of grab, closed mm 3,851 4,7 Weight kg 2,45 2,765 2.8 1, 2,642 2,27 3.2 1, 2,772 2,33 2.2 87 3,487 2,255 2.5 87 3,582 2,315 3.6 1, 2,942 2,39 Load Hook with Suspension Max. load t 25 Weight kg 255 Magnet Devices / Lifting Magnets Generator kw Electromagnets with suspension Power kw Diameter of magnet mm Weight kg * only magnet plate 3 22 1,9 5,9* LH 11 Port Litronic 17
11 C HR 11 C HR Fuel anti-theft device Air pre-filter with dust discharge Preheating fuel Preheating coolant * Preheating engine oil * 11 C HR 11 M HR 11 C Engine 11 M HR 11 C 11 M HR 11 C HR 11 C 11 M 11 M Hydraulic System Electronic pump regulation Liebherr hydraulic oil from 2 C to 4 C Liebherr hydraulic oil, biologically degradable Liebherr hydraulic oil, specially for warm or cold regions Magnetic rod in hydraulic tank Bypass filter Preheating hydraulic oil 11 M 11 C HR 11 C 11 M HR 11 M HR Uppercarriage right side light, 1 piece, LED Uppercarriage rear light, 2 pieces, LED Uppercarriage underneath rear light, 1 piece, LED Refuelling system with filling pump Railing on uppercarriage Generator Main battery switch for electrical system Warning beacon on uppercarriage, LED Protection for headlights Tool equipment, extended 11 C Uppercarriage 11 M Undercarriage Track pads, variants Individual control outriggers Three-piece chain guide Shuttle axle lock, automatic Outrigger monitoring system Tyres, variants Protection for piston rods, outriggers Two lockable storage boxes 11 M Equipment Cooling System Reversible fan drive, fully automatic Protective grid in front of cooler intake 18 LH 11 Port Litronic
Complete Machine Lubrication Lubrication undercarriage, manually centralised (one grease point) Central lubrication system for uppercarriage and attachment, automatically Central lubrication system for undercarriage, automatically Special coating, variants Monitoring Rear view monitoring with camera * Side view monitoring with camera 11 C HR 11 C HR 11 M HR 11 C 11 M HR 11 C 11 M Attachment Boom lights, 2 pieces, LED Stick lights, 4 pieces, LED Boom shutoff (retract / extend), electronically Attachment with electro-hydraulic end position control AutoLift Pressure warning mechanism hoist cylinder ERC system Boom cylinder cushioning Stick camera (with separate monitor), bottom side, with protection Load torque limitation Liebherr multi coupling system Pipe fracture safety valves hoist cylinders Pipe fracture safety valve stick cylinder Protection for piston rod, energy recovering cylinder Protection for piston rods, hoist cylinder Stick shutoff (retract / extend), electronically Retract stick without pressure Sticks with quick coupling Overload warning device 11 M 11 C HR 11 M HR 11 C 11 M Operator s Cab Stabilizer, proportional control on left joystick Cab lights rear, LED Cab lights front, LED Cab lights front, LED (under rain cover) Left arm console, folding Armrest adjustable Circular bubble level Driver profile, personalised (max. 5 drivers) Operator s seat Comfort Operator s seat Premium Driving alarm (acoustic signal is emitted during travel, can be switched ON / OFF) Fire extinguisher Horn, button on left joystick Joystick steering Cab elevation, hydraulic (LHC) Cab elevation, hydraulic with double parallelogram (LHC-D) Cab elevation, rigid (LFC) Automatic air conditioning Wheel steering (slim version) LiDAT, vehicle fleet management Automatic engine shut-down (time adjustable) Proportional control Radio Comfort, control via display with handsfree set Preparation for radio installation Back-up alarm (acoustic signal is emitted traveling backward, can not be switched off) Warning beacon on cab, LED Windows made from impact-resistant laminated safety glass Windscreen wiper, roof Windshield wiper, entire windscreen Top guard Front guard, adjustable Sun visor Flashing light (xenon) = Standard, = Option * = country-dependent Options and / or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr in order to retain warranty. LH 11 Port Litronic 19
Liebherr ERC-System Efficiency as standard ERC System More performance, less consumption Lowering the equipment stores energy in the ERC system. This stored energy is then made available to the machine to provide additional engine power. When the equipment is raised the stored energy is released and is reflected in powerful, homogeneous operating cycles. The result is a clear saving on fuel and, at the same time, even greater performance. 1. Attachment fitting raised / Energy released B 2. Lower attachment fitting / Store energy 4. Raise attachment fitting / Release energy 3. Attachment fitting lowered / Energy stored A B A ERC fuel savings of up to 3 % lower running costs reduced pollutant and noise emissions System power The energy recovery cylinder is a storage system which is independent of the diesel engine. The system performance of material handling machines fitted with the ERC system is composed of the installed engine power and the energy recovery cylinder. When the equipment is raised, energy from the ERC system is supplied in addition to the power from the diesel engine. A ERC performance System performance Liebherr-Hydraulikbagger GmbH Liebherrstraße 12, D-88457 Kirchdorf / Iller S 49 7354 8-, Fax 49 7354 8-72 94 www.liebherr.com, E-Mail: info.lhb@liebherr.com www.facebook.com/liebherrconstruction B Boom position Engine power Printed in Germany by Schirmer RG-BK LHB/VF 1221112-1-12.16_enGB All illustrations and data may differ from standard equipment. Subject to change without notice. Engine ERC-System increased overall power Power [kw] System power