COMMERCIAL CONTROL VALVES Magnum Control Valve
COMMERCIAL CONTROL VALVES Magnum Control Valve Controller Options The Pentair Water Magnum Control Valve is one of the most versatile valves on the market. Logix Series All-electronic control platform 24-hour super-capacitor backup no battery necessary Remote mount kit allows programming module to be installed up to 40 feet away Universal controller works on all Autotrol brand valves Automatic capacity calculations no math or salt tables necessary 12-volt operation The Logix series offers the ultimate in control for the Magnum valve. Simple 3-step programming and installation makes this electronic controller the industry leader. 742 Time Clock Simple, economic electronic time clock (chronometric) 7- or 99-day regeneration settings Filter or conditioner setting in one control Fully programmable cycle times Salt setting in 1-pound increments (lbs/cu ft) Single controller operates Autotrol 255, 263, 268, 278 models, and Pentair Water Magnum and Magnum IT with one controller 762 Demand Simple, economic electronic demand (volumetric) Calendar override 99 day 28-day variable reserve Filter or conditioner setting in one controller Automatic capacity calculations Fully programmable cycle times Salt setting in 1-pound increments (lbs/cu ft) Operates 255, 263, 268, 278, and Magnum IT with one controller 764 Demand Same features as the 762, plus: Multi-tank applications (twin alternating, multi-tank parallel) Control lockout Remote regeneration
Specifications Electrical Specifications Controller Operating Voltage Input Supply Frequency Motor Input Voltage Control System Power Consumption 12 Volt AC (Requires a transformer supplied by GE) 50 or 60 Hz (Controller configuration dependent) 12 Volt AC 3 Watts average Transformer Specifications All Controllers All Controllers require the use of a Pentair Water supplied transformer. Transformer Output Voltage 12 Volt AC 400mA Transformer Input Options 115 Volt AC 50/60 Hz; 230 Volt AC 50/60 Hz; 100 Volt AC 50/60 Hz Transformer Plug Options Indoor North American Plug Australian Plug Outdoor North American United Kingdom Plug (UL Listed for outdoor use) Mainland Europe Plug Japanese Plug Taiwan/Korea Plug Additional transformers may be available call for more information. Flow Rates (Valve Only) Service @ 15 psi (1.03 ) drop 76 (17.3 ) Backwash @ 25 psi (1.72 ) drop 89 (20.2 ) Service Cv = 19.5 (Kv = 17) Backwash Cv = 17.8 (Kv = 19.9) Valve Connections/Dimensions Tank Thread Inlet/Outlet Brine Line Drain Line* Riser Tube Diameter Riser Installation Pilot Drain and Auxiliary Hydraulic Output 4-inch 8 UN 2-inch: connections NPT or BSPT, Female, CPVC 3/4-inch NPT 1-1/2-inch: connections for NPT or BSPT, Female, CPVC 1-1/2-inch Above top of tank 5/8-inch (±1/8-inch) 1/4-inch tube fitting * Valve installed drain flow controls available (5 40 ). If higher backwash flow is needed, an external flow control will be required. Design Specifications/Ratings Valve Body Thermoplastic O-rings EPDM Injector 7 sizes available: 14, 16, 18, 21, 24, 30, 36 Working Pressure 25 psi 100 psi (1.72 6.9 ) Water Temperature 35 100 F (2 38 C), 120 F (49 C) Ambient Options Top Mount or Side Mount Configuration
COMMERCIAL CONTROL VALVES Magnum Control Valve Injector Performance Magnum 0.30 0.10 2.50 1.50 Injector 1000441 For 14-inch Tanks 0.70 0.30 0.10 3.50 2.50 1.50 Injector 1000442 For 16-inch Tanks TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE 3.50 Injector 1000443 For 18-inch Tanks 5.00 Injector 1000444 For 21-inch Tanks 0.70 2.50 4.00 0.30 0.10 1.50 TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE
7.00 Injector 1000445 For 24-inch Tanks 10.0 Injector 1000446 For 30-inch Tanks 1.40 1.20 6.00 5.00 8.0 4.00 6.0 4.0 2.0 0.0 TOTAL BRINE DRAW RINSE TOTAL BRINE DRAW RINSE 2.50 1.50 14.0 12.0 10.0 8.0 6.0 4.0 Injector 1000447 For 36-inch Tanks 2.0 0.0 TOTAL BRINE DRAW RINSE NOTE: Brine draw and rinse rates on empty tank.
COMMERCIAL CONTROL VALVES Magnum Control Valve Valve Flow Rate Characteristics psi Magnum Cv C&I Valve (1-1/2 inch inlet) 240 35 P R E S S U R E D R O P 220 200 180 160 140 120 100 80 60 40 20 30 25 20 15 10 5 MAGNUM Cv BACKWASH FLOW MAGNUM Cv SERVICE FLOW 0 0 0 10 20 30 40 50 60 70 80 90 100 m 3 /h 0 2 4 6 8 10 12 14 16 18 20 22 F L O W R AT E Flow Sensor Options Internal Turbine Unit Normal Operating Range 2-80 (0.45-18.1 ) Peak Operating Range 1-100 (0.22-22.7 ) Normal Accuracy Range ±3% External Flow Meter 2.0 Inch Normal Operating Range* 5.0-225 ( - 51.0 ) Normal Accuracy Range ±3% Connections 2-inch: connections NPT or BSPT, Female, CPVC *Recommended maximum continuous duty flow rate of 2-inch turbine is 70% of maximum flow rate. Tank Adapter Options Threaded Stainless Steel Flanged Stainless Steel 4-inch 8 UN 6-inch
Magnum Valve Outline Dimensions 1-1/2-inch Magnum Cv 2-inch Magnum IT 22.796 (57.90 cm) 22.796 (57.90 cm) 7.500 (19.05 cm) 7.500 6.493 (19.05 (16.5 cm) cm) 6.493 (16.5 cm) 27.224 27.224 13.993 13.993 4.429 4.429 4.500 4.500 AUX. AUX. DRAIN DRAIN 4.500 4.500 3.993 (10.14 cm) 3.993 (10.14 cm) 11.376 11.376 11.471 (29.13 cm) 11.471 (29.13 cm) 1.113 (2.82 cm) 1.113 (2.82 cm) 15.539 15.539 (39.47 cm) (39.47 cm) 1.113 1.113 15.53 9 15.53 9 4.42 9 4.42 9 13.481 (34.24 cm) 13.481 (34.24 cm) 9.000 (22.86 cm) 9.000 (22.86 cm) 13.481 9.000 13.481 9.000 8.680 (22.04 cm) 8.680 (22.04 cm) 8.710 8.710 19.500 (49.53 cm) 14.000 (35.56 cm) 19.500 (49.53 cm) 7.000 (17.78 cm) 14.000 (35.56 cm) 2.817 (7.15 cm) 7.000 (17.78 cm) 4.018 (1 cm) 4.018 (1 cm) 2.817 (7.15 cm) 2.817 3.998 2.817 7.000 7.0006.500 6.500 9.750 9.750 16.250 16.250 3.998
20580 Enterprise Avenue 5730 North Glen Park Road 2010 Pentair Residential Filtration, LLC Brookfield, WI 53045 Milwaukee, WI 53209 1017972 Rev F FE10 Tel: 262.784.4490 Tel: 262.238.4400 Fax: 262.784.7794 Fax: 262.238.4402 Customer Care: 800.279.9404 www.pentairwatertreatment.com