- till 65% Energy-saving - longlife time till 50000hrs - low maintenance cost Your partner: LeuchTek GmbH Im Hegen 6C, D-22113 Oststeinbek(Hamburg) Lighting Energy- Saving Solution in Parking House www.leuchtek.com
Lighting in Parking House Lighting is an important factor in all parking house. The normal parking house needs hig lux illumination, for example 50 Lux at parking position, 75 Lux in enterence and 200 lux in paying fee area. The parking house needs long time or 24 hours per day lighting on thus it costs a lot of energy. Now perhaps you are searching for an alternative solution with features of: - Energy-saving - Longlife time and low maintenance cost - Easy to replace the traditional T8 fluorescent tube - High quality light Then we have right solution for you! We would like to offer you complete solustion inclusing LED tube, SparTube, IP65 waterproof fixtures and installations. But the LED tube and SparTube have the features of - Energy-saving 40-70% of energy can be saved. - Longlife time and low maintenance cost The LED tube lifetime is till 50000hrs and the SparTube lifetime is till 20000hrs. - Easy to replace the traditional T8 fluorescent tube Your existing lamp fixtures can be stay and reused. The existing magnetic ballast can be also stay. The LED tube and SparTube can be installed directly by just changing the start. We are unique, we are excellent
About LED Tube LED Tube is an advanced energy-saving lamp with key features as below: - Super energy saving till 60%. For example for a parking housing with 300 pieces of normal 1.5m T8 fluorescent tubes, they consume per year 65W (58W tube+7w ballast) *300pcs*24hrs*365day=170820kWh, as comparison, the 1.5m LED 22W solution can save (65W-22W) *300pcs*24hrs*365days =113004kWh, roughly equal 21470,-EUR (0.19EUR/kWh). - Super long life-time. The life time of LED tube can be as long as 50000 hours. - High quality light, no strobing during working, fast response (no delay), no damage with frequent switching. 66% Energy-saving - Top constant current isolated circuit design with wide voltage range. - Rotatable angle to adjust the tube. LED Normale LED-Röhre Lichtverlust an der Seite LeuchTek LED-Röhre Einstellbar an der Seite
Technical Specification of LED Tube Specifications Materials Work voltage CRI Parameter Upper case: premium quality aluminium Lower case: polycarbonat LED: SMD3528 Input: 190V-255VAC, 50Hz >75 Comment High illumination efficieny, low light decay Wide work voltage. Very high output frequency thus no flicker, no noise Near nature light, see the true color of objects Lifetime till 50.000 hours Super long lifetime Tube size 30mm Compatable with T8 Standard EN 61347-1:2001 EN61347-2-3:2001+A1:2004+A2 Compliant with TÜV. CE Workable environment Power efficiency -15 C ~ 50 C 10%-85% humidity Wide temperature range >0,95 Electronic ballast inside, high efficiency Type LeTub-1200-T19W LeTub-1500-T23W LeTub-1500-T30W Power 19W±5% 23W±5% 30W±5% Current 0,09A 0,14A 0,13A Length 1200mm (4") 1500mm (5") 1500mm (5") Color Temp. 4000K/6500K 4000K/6500K 4000K/6500K Lumen Value 1710lm 2150lm 2700lm 24 months guarantee * Specifications are subject to change without prior notice www.leuchtek.com
About SparTube SparTube is an advanced energy-saving fluorescent lamp with key features as below: - Energy-saving For example for a parking housing with 300 pieces of normal 1.5m T8 fluorescent tubes, they consume per year 65W (58W tube+7w ballast) *300pcs*24hrs*365day=170820kWh, as comparison, the 1.5m SparTube 35W solution can save (65W-35W) *300pcs*24hrs*365days =78840kWh, roughly equal 14979,-EUR (0.19EUR/kWh). - Lower investment Compared to LED tubes, the price of Spartube is less than 50%. Thus your investment is also lower than 50%. - Easy to replace the traditional T8 fluorescent tube The SparTube has the same length as the traditional T8 fluorescent tube, i.e. 60cm, 120cm and 150cm. The traditional tubes can be simply replaced by removing the starter. For details please refer to our installation instruction. - High quality light Thanks to its high frequency technology, the light from SparTube does not flicker. And the color rendering index is higher, too. Supermarket Agriculture lighting Office lighting Factory
Technologies Behind SparTube II is designed by LeuchTek. It is tested and certificated by German institute. Inside of the slim SparTube body, there are many patented technologies and innovative ideas. Electronic ballast is integrated inside of the tubes. The traditional magnetic ballast has been replaced by a high efficient electronic ballast. It is further miniaturized and integrated in the tube s body. Thus, the SparTube works without external ballast and it can save a lot of energy. Optimized structure to reach better performance and flexibility The mini electronic ballast is fixed together with aluminium housing to get best heat dissipation performance and prolong the lifetime of the ballast. The enlarged available space permits the usage of best quality T5 tubes with standard size. Tube-in-tube technology SparTube consists of two tubes, the outer is a polycarbonat tube and the inner is a fluorescent tube. This structure builts one air layer between two tubes and this air layer keeps a constant temperature for the inner tube. It prolongs the lifetime of the inner tube. Further, it decreases the surface temperature of the outer tube. Thus SparTube issues less heat and lightens the load of the air-condition in summer time to save more energy. Without PC cover With PC cover Removable and replacable PC cover, tube and ballast The outer polycarbonat cover can be kept for applications that require the protection of the glass tube, e.g. food industry application. In other cases the polycarbonat can be removed to get maximum lightout for other general applications. In case of malfuncation, the T5 tube and inner electronic ballast can be easily replaced. Thus the maintenance and service can be done quickly. Reflector inside A fluorescent tube issues light to all directions and some of it is wasted. In SparTube, an aluminium reflector has been integrated inside and this reflector can save part of the wasted light. No flicker, quick start, no annoying humming sound The light of the traditional fluorescent and magnetic ballasts flickers following the low 50 Hz frequency and it always takes a moment until they turn on. The SparTube works with very high frequency thus people will no long feel the flicker and hear the annoying humming sound.
Technical Specification of SparTube Specifications Materials Work voltage CRI Parameter Upper case: premium quality aluminium Lower case: polycarbonat Tube: pure tri-phosphor tube Input: 190V-255VAC, 50Hz >83 Comment High illumination efficieny, low light decay Wide work voltage. Very high output frequency thus no flicker, no noise Near nature light, see the true color of objects Lifetime 20.000 hours Long lifetime Tube size Standard 36mm EN 61347-1:2001 EN61347-2-3:2001+A1:2004+A2 Little bigger than T8, but still suitable for most replacement cases Compliant with CE Workable environment Power efficiency -15 C ~ 50 C 10%-85% humidity Wide temperature range >0,95 Electronic ballast inside, high efficiency Type LT-14W-NW/CW LT-25W-NW/CW LT-35W-NW/CW Power 14W±5% 25W±5% 35W±5% Current 0,07A 0,12A 0,16A Length 600mm (2") 1200mm (4") 1500mm (5") Color Temp. 4000K/6500K 4000K/6500K 4000K/6500K Lumen Value 1250lm 2250lm 3200lm 12 months guarantee Tested in CE-Lab in Germany * Specifications are subject to change without prior notice www.leuchtek.com
Auxiliary IP65 waterproof fixture As complete set solution, we offer you the suitable IP65 waterproof fixture with features: - No magnetic or electronic ballast inside, saving cost and energy - Wiring is ready and it is tailored for LED tube or SparTube application, customer can install the tube regardless power inputting side. - Metal clip, VDE cable, TÜV CE certificate ITS Testing & Certification F L N 1x58W LED Tube /SparTube LED Tube / SparTube Suitable for LED tube or SparTube with single-side power input version Installation Per customer s request, we can also offer you installation service to make your project as a turn-key project. LeuchTek GmbH Im Hegen 6C, D-22113 Oststeinbek(Hamburg) T: +49 40 69456430 F: 69456432 E: info@leuchtek.com www.leuchtek.com