Siemens G 2018 SITRNS LVS200 Overview SITRNS LVS200 is a vibrating point level switch for high, low, or demand level detection of bulk solids. enefits High resistance to mechanical forces Strong vibration resistance to high bulk material loads Rotatable enclosure for convenient wiring Suitable for low density material: standard version, 20 g/l (1.3 lb/ft 3 ); liquid/solid interface version, 50 g/l (3 lb/ft 3 ) and low density option min. 5 g/l (0.3 lb/ft 3 ) ustomer desired extensions up to 20 000 mm (787 inch) Optional detection of solids within liquid urable short fork option with 165 mm (6.5 inch) insertion length pplication The standard LVS200 detects high, low, or demand levels of dry bulk solids in bins, silos, or hoppers. The liquid/solid interface version can also detect settled solids within liquids or solids within confined spaces such as feed pipes. It is designed to ignore liquids in order to detect the interface between a solid and a liquid. pipe extension version is available with either the standard or liquid/solid interface electronics and fork, separated by a customer supplied 1 inch pipe. SITRNS LVS200 has an optional to 20 m output for monitoring buildup on the fork to determine when preventative maintenance should be performed in sticky applications. The LVS200 has a compact design and can be top, side or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged. signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition. Key pplications: dry bulk solids in bins, silos, hoppers or settled solids within liquids (interface version) Siemens I 01 Update 12/2017 /91
Siemens G 2018 SITRNS LVS200 Technical specifications Mode of operation Measuring principle Vibrating point level switch Input Measured variable High, low, and demand Measuring frequency Standard 125 Hz Liquid/solid interface and short fork 350 Hz version Output PNP Open collector: Permanent load max. 0., short-circuit and overload protected Turn-on voltage: max. 50 V (reverse protection) 2-wire without contact Load current: Min. 10 m Max. 500 m permanent Max. 2 < 200 ms Max. 5 < 50 ms Voltage drop on the electronic module: max. 7 V with closed electric circuit ut-off current with open electric circuit: max. 5 m Relays Version with 1 relay SPT relay Version with 2 relays PT relay Relay delay rom loss of vibration: approximately 1 second rom resumption of vibration: approximately 1... 2 seconds Signal delay Probe uncovered to covered: approximately 1 second Probe covered to uncovered: approximately 1... 2 seconds Relay fail-safe High or low, switch selectable larm output Relay 8 at 250 V, non-inductive Relay 5 at 30 V, non-inductive m output 8/16 m or... 20 m Resolution... 20 m ± 0.1 m Sensitivity High or low, switch selectable Rated operating conditions Installation conditions Location Indoor/outdoor mbient conditions mbient temperature -0... +60 (-0... +10 ) Installation category III Pollution degree 2 Medium conditions Process temperature ll except S lass II, Group G: -0... +150 (-0... +302 ) S lass II, Group G: -0... +10 (-0... +28 ), S temperature code T3 Max. threaded bushing temperature 60 (10 ) Max. enclosure surface temperature 90 (19 ) (ategory 2) Max. extension surface temperature 150 (302 ) (ategory 1) Pressure (vessel) Max. 10 bar g (15 psi g) uropean Pressure irective 201/68/U: ategory 1 Minimum material density Standard version: approx. 20 g/l (1.2 lb/ft 3 ) Liquid/solid interface version: approx. 50 g/l (3 lb/ft 3 ) Optional low density version: approx. 5 g/l (0.3 lb/ft 3 ) esign Material nclosure poxy coated aluminum Process connection Thread 1½" NPT [(Taper), NSI/SM 1.20.1], R ½" [(SPT), N 10226], and flange options Optional sliding bushing with 2" NPT [(Taper), NSI/SM 1.20.1] or SP thread Thread material: stainless steel 303 (1.301) Tine material Stainless steel 316L (1.0), PT-coated tines are available upon special request egree of protection IP65/Type /NM onduit entry 2 x M20 x 1.5 or 2 x ½" NPT Weight Standard version, no extensions: approx. 2.0 kg (. lb) Solids/liquids version, no extensions: approx. 1.9 kg (.2 lb) Power supply 19... 230 V, +10 %, 50... 60 Hz, 8 V 19... 55 V, +10 %, 1.5 W ertificates and approvals S/M General Purpose S/M ust Ignition Proof RM TX II 1/2 S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, available only with power supply options 5 and 6 TX II 1G and 1/2 G ex ia II; TX II 1 and 1/2, available only with power supply option 5 /92 Siemens I 01 Update 12/2017
Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, standard 7ML5731- SITRNS LVS200 is a vibrating point level switch 7 7 777 for high, low, or demand level detection of bulk - 77 0 solids. lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply 19... 230 V, 19... 55 V, one relay output 1 (SPT) 1) 19... 230 V, 19... 55 V, two relay outputs 2 (PT) 1) 18... 50 V PNP 1) 3 19... 230 V / without contact, 2-wire loop powered 1) 7... 9 V (requires NMUR switch amplifier) 5 NMUR I 6097-5-6, 2-wire 2) 8/16 m or... 20 m; 12.5... 35 V, 2-wire 3) 6 19... 230 V, 19... 55 V, one relay output 7 (SPT) basic version )5) Process temperature Without temperature isolator With temperature isolator Separated enclosure - cable length 1.5 m (.92 ft) [max. temperature process 150 (302 )/ max. temperature electronics 60 (10 )] Separated enclosure - cable length.0 m (13.12 ft) [max. temperature process150 (302 )/ max. temperature electronics 60 (10 )] Process connection Threaded R 1½" [(SPT), N 10226] 1½" NPT [(Taper), NSI/SM 1.20.1] G 2" [(SPP), N ISO 228-1], sliding sleeve [min. length 500 mm (19.69 inch)] 6) 2" NPT [(Taper), NSI/SM 1.20.1], sliding sleeve [min. length 500 mm (19.69 inch)] 6) langed N 100 PN 6, N 1092-1 7) N 100 PN 16, N 1092-1 2" SM 150 lb 16.5 G 3" SM 150 lb 16.5 H " SM 150 lb 16.5 J 2" Tri-clamp (N 50) ISO 2852 K xtension length Stainless steel 30 (1.301) Standard length, 235 mm (9.25 inch) 1 1 dd Order code Y01 and plain text: "Insertion length... mm" 300... 500 mm (11.81... 19.69 inch) 1 2 501... 750 mm (19.72... 29.53 inch) 1 3 751... 1 000 mm (29.57... 39.37 inch) 1 1 001... 1 250 mm (39.1... 9.21 inch) 1 5 1 251... 1 500 mm (9.25... 59.06 inch) 1 6 1 501... 1 750 mm (59.09... 68.90 inch) 1 7 1 751... 2 000 mm (68.9... 78.7 inch) 1 8 2 001... 2 250 mm (78.78... 88.58 inch) 2 1 2 251... 2 500 mm (88.62... 98.3 inch) 2 2 2 501... 2 750 mm (98.6... 108.27 inch) 2 3 2 751... 3 000 mm (108.31... 118.11 inch) 2 3 001... 3 250 mm (118.15... 127.95 inch) 2 5 3 251... 3 500 mm (127.99... 137.80 inch) 2 6 3 501... 3 750 mm (137.83... 17.6 inch) 2 7 3 751... 000 mm (17.68... 157.8 inch) 2 8 rticle No. SITRNS LVS200, standard 7ML5731- SITRNS LVS200 is a vibrating point level switch for high, low, or demand level detection of bulk 7 7 777-77 0 solids. Stainless steel 316L (1.0) Standard length, 235 mm (9.25 inch) 3 1 dd Order code Y01 and plain text: "Insertion length... mm" 300... 500 mm (11.81... 19.69 inch) 3 2 501... 750 mm (19.72... 29.53 inch) 3 3 751... 1 000 mm (29.57... 39.37 inch) 3 1 001... 1 250 mm (39.1... 9.21 inch) 3 5 1 251... 1 500 mm (9.25... 59.06 inch) 3 6 1 501... 1 750 mm (59.09... 68.90 inch) 3 7 1 751... 2 000 mm (68.9... 78.7 inch) 3 8 2 001... 2 250 mm (78.78... 88.58 inch) 1 2 251... 2 500 mm (88.62... 98.3 inch) 2 2 501... 2 750 mm (98.6... 108.27 inch) 3 2 751... 3 000 mm (108.31... 118.11 inch) 3 001... 3 250 mm (118.15... 127.95 inch) 5 3 251... 3 500 mm (127.99... 137.80 inch) 6 3 501... 3 750 mm (137.83... 17.6 inch) 7 3 751... 000 mm (17.68... 157.8 inch) 8 Material process connection/extension Stainless steel threads 30 (1.301), flanges 321 (1.51), Tri-clamp 30 (1.301) 8) 1 Stainless steel 316L (1.0) 9) 2 pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, RM TX II 1G and 1/2G ex ia II; TX II 1 and 1/2, RM I-x t III a/b G x ta/tb III a/b, x ta III a H x Ga/Gb x ia II, 0x ia II Ga; x ta/tb J III a/b, x ta III a 1) vailable with pproval options..., G only. 2) vailable with pproval options,, only. 3) vailable with pproval options,, G only. ) vailable with configurations 7ML5731-711-10 or 7ML5731-711-10 only. 5) asic version is cost effective and offers fast delivery. 6) Not available with extension length options 11, 12, 31, 32. 7) Max. 6 bar (87 psi). 8) vailable with option extension length 11... 28. 9) vailable with option extension length 31 8. Siemens I 01 Update 12/2017 /93
Siemens G 2018 SITRNS LVS200 urther esigns Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max. 000 mm (157.8 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text nhanced sensitivity > 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) 3) nhanced sensitivity < 5 g/l via electronics, increased insertion length of 25 mm (0.98 inch), and increased aluminum fork width 1)3) Signal bulb inserted in M20 cable gland 2) NMUR 8/16 m switch amplifiers available, contact factory for pricing Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation Spare Parts [19... 230 V, 19... 55 V, one relay output (SPT)] [19... 230 V, 19... 55 V, two relay output (PT)] Sliding sleeve, 2" SP (ISO 228) Sliding sleeve, 2" NPT (SM 1.20.1) Namur Isolator switch amplifier relay output K2-SR2-x1.W vailable ex stock or details see page 10/11 in the appendix. SITRNS LVS200, standard, power supply 7, process temperature, process connection, extension length 11, material process connection/extension 1, and approval SITRNS LVS200, standard, power supply 7, process temperature, process connection, extension length 11, material process connection/extension 1, and approval Order code Y01 Y1 K05 G01 20 1) vailable only with power supply 1 and pproval, and with Process connection flange... J. 2) vailable with pproval option only. 3) K05 and G01 are not available together. rticle No. 7ML1998-5T63 7ML1830-1KL 535525363 7ML1830-1JM 7ML1830-1JN 535667901 7ML5731-711-10 7ML5731-711-10 rticle No. SITRNS LVS200, short fork for liquids/solids interface Vibrating point level switch for short insertion and 7ML5732-7 7 777-77 0 liquids/solids interface applications as well as high load applications with short insertion requirements. lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply 19... 230 V, 19... 55 V, one relay output (SPT) 6) 1 19... 230 V, 19... 55 V, two relay outputs (PT) 6) 2 18... 50 V PNP 6) 3 19... 230 V / without contact, 2-wire loop powered 6) 8/16 m or... 20 m; 12.5... 35 V, 2-wire 1) 5 Process temperature Without temperature isolator With temperature isolator Separated enclosure - cable length 1.5 m (.92 ft) [max. temperature process 150 (302 )/ max. temperature electronics 60 (10 )] Separated enclosure - cable length.0 m (13.12 ft) [max. temperature process 150 (302 )/max. temperature electronics 60 (10 )] Process connection Threaded R 1½" [(SPT), N 10226] 1½" NPT [(Taper), NSI/SM 1.20.1] G 2" [(SPP), N ISO 228-1], sliding sleeve [min. length 500 mm (19.69 inch)] 2) 2" NPT [(Taper), NSI/SM 1.20.1], sliding sleeve [min. length 500 mm (19.69 inch)] 2) langed N 100 PN 6, N 1092-1 3) N 100 PN 16, N 1092-1 2" SM 150 lb 16.5 G 3" SM 150 lb 16.5 H " SM 150 lb 16.5 J 2" Tri-clamp (N 50) ISO 2852 K xtension length Stainless steel 30 (1.301) Standard length, 165 mm (6.50 inch) 1 1 dd Order code Y01 and plain text: "Insertion length... mm" 200... 500 mm (7.87... 19.69 inch) 1 2 501... 750 mm (19.72... 29.53 inch) 1 3 751... 1 000 mm (29.57... 39.37 inch) 1 1 001... 1 250 mm (39.1... 9.21 inch) 1 5 1 251... 1 500 mm (9.25... 59.06 inch) 1 6 1 501... 1 750 mm (59.09... 68.90 inch) 1 7 1 751... 2 000 mm (68.9... 78.7 inch) 1 8 2 001... 2 250 mm (78.78... 88.58 inch) 2 1 2 251... 2 500 mm (88.62... 98.3 inch) 2 2 2 501... 2 750 mm (98.6... 108.27 inch) 2 3 2 751... 3 000 mm (108.31... 118.11 inch) 2 3 001... 3 250 mm (118.15... 127.95 inch) 2 5 3 251... 3 500 mm (127.99... 137.80 inch) 2 6 3 501... 3 750 mm (137.83... 17.6 inch) 2 7 3 751... 000 mm (17.68... 157.8 inch) 2 8 /9 Siemens I 01 Update 12/2017
Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, short fork for 7ML5732- liquids/solids interface Vibrating point level switch for short insertion and 7 7 777-77 0 liquids/solids interface applications as well as high load applications with short insertion requirements. Stainless steel 316L (1.0) Standard length, 165 mm (6.50 inch) 3 1 dd Order code Y01 and plain text: "Insertion length... mm" 200... 500 mm (7.87... 19.69 inch) 3 2 501... 750 mm (19.72... 29.53 inch) 3 3 751... 1 000 mm (29.57... 39.37 inch) 3 1 001... 1 250 mm (39.1... 9.21 inch) 3 5 1 251... 1 500 mm (9.25... 59.06 inch) 3 6 1 501... 1 750 mm (59.09... 68.90 inch) 3 7 1 751... 2 000 mm (68.9... 78.7 inch) 3 8 2 001... 2 250 mm (78.78... 88.58 inch) 1 2 251... 2 500 mm (88.62... 98.3 inch) 2 2 501... 2 750 mm (98.6... 108.27 inch) 3 2 751... 3 000 mm (108.31... 118.11 inch) 3 001... 3 250 mm (118.15... 127.95 inch) 5 3 251... 3 500 mm (127.99... 137.80 inch) 6 3 501... 3 750 mm (137.83... 17.6 inch) 7 3 751... 000 mm (17.68... 157.8 inch) 8 Material process connection/extension Stainless steel threads 30 (1.301), 1 flanges 321(1.51), Tri-clamp 30 (1.301) ) Stainless steel 316L (1.0) 5) 2 pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM I-x t III a/b TX II 1G and 1/2G ex ia II; TX II 1 and 1/2,, RM x ta/tb III a/b, x ta III a G x Ga/Gb x ia II, 0x ia II Ga; x ta/tb III H a/b, x ta III a 1) vailable with pproval options,, only. 2) Not available with extension length options 11,12, 31, 32. 3) Max. 6 bar (87 psi). ) vailable with option extension length 11... 28. 5) vailable with option extension length 31 8. 6) Power supply options 1, 2, 3, not allowed with pprovals options and H. urther esigns Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max. 000 mm (17.8 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text Signal bulb inserted in M20 cable gland 1)3) Note: G02 must be ordered for solids/liquids interface detection. djustable sensitivity (by potentiometer) for solids/liquids interface detection 1)2)) Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation Spare Parts [19... 230 V, 19... 55 V, two relay output (PT)] Replacement lectronics Module (350 Hz) [19... 230 V, 19... 55 V, one relay output (SPT)] Sliding sleeve, 2" SP (ISO 228) Sliding sleeve, 2" NPT (SM 1.20.1) Order code Y01 Y1 20 G02 1) vailable with pproval option only. 2) vailable with power supply option 1 only. 3) 20 not allowed with power supply options or 5. ) G02 not allowed with process temperature options or. rticle No. 7ML1998-5T63 535525363 7ML1830-1KM 7ML1830-1JM 7ML1830-1JN Siemens I 01 Update 12/2017 /95
Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, pipe extension 7ML5733- Vibrating point level switch for high or low levels of 7 7 777 bulk solids - 77 0 xtended using 1" pipe extension (customer supplied) lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply 19... 230 V, 19... 55 V, one relay output 1 (SPT) 1) 19... 230 V, 19... 55 V, two relay outputs 2 (PT) 1) 18... 50 V PNP 1) 3 19... 230 V / without contact, 2-wire loop powered 1) 7... 9 V (requires NMUR switch amplifier) 5 NMUR I 6097-5-6, 2-wire 2) 8/16 m or... 20 m; 12.5... 35 V, 2-wire 3) 6 Process temperature Up to 150 (302 ) Process connection Threaded R 1½" [(SPT), N 10226] 1½" NPT [(Taper), NSI/SM 1.20.1] langed N 100 PN 6, N 1092-1 ) N 100 PN 16, N 1092-1 2" SM 150 lb 16.5 3" SM 150 lb 16.5 " SM 150 lb 16.5 G 2" Tri-clamp (N 50) ISO 2852 K Process connection material Stainless steel threads 30 (1.301), 1 flanges 321 (1.51), Tri-clamp 30 (1.301) Stainless steel 316L (1.0) 2 xtension length ustomer supplied 1" pipe extension 1 Length: 300... 3 800 mm (11.81... 19.61 inch) pplication type ry bulk solids (125 Hz) 1 Liquids/solids interface (350 Hz) 2 pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, RM TX II 1G and 1/2G ex ia II; TX II 1 and 1/2, RM I-x t III a/b G x ta/tb III a/b, x ta III a H x Ga/Gb x ia II, 0x ia II Ga; x ta/tb III J a/b, x ta III a 1) vailable with pproval options,,,, G only. 2) vailable with approval options,, J and application type 1 only. 3) vailable with pproval options,, G only. ) Max. 6 bar (87 psi). urther esigns Please add "-Z" to rticle No. and specify Order code(s). Total insertion length: nter the total insertion length in plain text description, max. 3 800 mm (19.61 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text nhanced sensitivity > 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) 5) nhanced sensitivity < 5 g/l via electronics, increased insertion length of 25 mm (0.98 inch) and increased aluminum fork width 1))5) djustable sensitivity (by potentiometer) for solids/liquids interface detection 2)3)) Signal bulb inserted in M20 cable gland 2)6) Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation Spare Parts [19... 230 V, 19... 55 V, one relay output (SPT)] [19... 230 V, 19... 55 V, two relay output (PT)] Replacement lectronics Module (350 Hz) [19... 230 V, 19... 55 V, one relay output (SPT)] NMUR Isolated switch amplifier Relay output K2-SR2-x1.W Order code Y01 Y1 K05 G01 G02 20 rticle No. 7ML1998-5T63 7ML1830-1KL 535525363 7ML1830-1KM 535667901 1) vailable only with power supply 1 and pprovals,, and with Process connection flange G. 2) vailable with approval options only. 3) vailable with power supply option 1 only and application type 2. ) Not available with option K05. 5) vailable with pplication type 1 only. 6) 20 not allowed with power supply options, 5, and 6. /96 Siemens I 01 Update 12/2017
Siemens G 2018 SITRNS LVS200 rticle No. SITRNS LVS200, cable extended Vibrating point level switch for high or low level detection of bulk solids materials 7ML573-7 7 777-77 0 lick on the rticle No. for the online configuration in the PI Life ycle Portal. Power supply 19... 230 V, 19... 55 V, one relay output (SPT) 1) 1 19... 230 V, 19... 55 V, two relay outputs (PT) 1) 2 18... 50 V PNP 1) 3 19... 230 V / without contact, 2-wire loop powered 1) 7... 9 V (requires NMUR switch amplifier) NMUR I 6097-5-6, 2-wire 2)5) 5 8/16 m or... 20 m; 12.5... 35 V, 2-wire 3) 6 Process temperature Up to 80 (176 ) Process connection Threaded R 1½" [(SPT), N 10226] (1.301/30) 1½" NPT [(Taper), NSI/SM 1.20.1] (1.301/30) langed N 100 PN 6, N 1092-1 (1.51/321) ) N 100 PN 16, N 1092-1 (1.51/321) 2" SM 150 lb 16.5 (1.51/321) 3" SM 150 lb 16.5 (1.51/321) " SM 150 lb 16.5 (1.51/321) G xtension length 750... 1 000 mm (29.5... 39. inch) [max. length 1 0 20 000 mm (787. inch), not with Power supply option 5 (max. 10 000 mm, 393.7 inch)] 8) dd Order code Y01 and plain text: "Insertion length... mm" 1 001... 2 000 mm (39.1... 78.7 inch) 1 1 2 001... 3 000 mm (78.78... 118.11 inch) 1 2 3 001... 000 mm (118.15... 157.8 inch) 1 3 001... 5 000 mm (157.52... 196.85 inch) 1 5 001... 6 000 mm (196.89... 236.22 inch) 1 5 6 001... 7 000 mm (236.26... 275.59 inch) 1 6 7 001... 8 000 mm (275.63... 31.96 inch) 5) 1 7 8 001... 9 000 mm (315... 35.33 inch) 5) 1 8 9 001... 10 000 mm (35.37... 393.70 inch) 5) 2 0 10 001... 11000 mm (393.7... 33.07 inch) 5)6) 2 1 11 001... 12 000 mm (33.11... 72. inch) 5)6) 2 2 12 001... 13 000 mm (72.8... 511.81 inch) 5)6) 2 3 13 001... 1 000 mm (511.85... 551.18 inch) 5)6) 2 1 001... 15 000 mm (551.22... 590.55 inch) 5)6) 2 5 15 001... 16 000 mm (590.59... 629.92 inch) 5)6) 2 6 16 001... 17 000 mm (629.96... 669.29 inch) 5)6) 2 7 17 001... 18 000 mm (669.33... 708.66 inch) 5)6) 2 8 18 001... 19 000 mm (708.70... 78.03 inch) 5)6) 3 0 19 001... 20 000 mm (78.07... 787.0 inch) 5)6) 3 1 pplication type ry bulk solids (125 Hz) 1 Heavier materials and robust applications (350 Hz) 7) 2 SITRNS LVS200, cable extended Vibrating point level switch for high or low level detection of bulk solids materials pprovals S/M ust Ignition Proof, RM TX II 1/2, RM S/M General Purpose, RM,, RM S/M IS lass I, II, III iv. 1, Groups,,,,,, G, M lass I, ex ia II, S lass I, x ia II, RM TX II 1G and 1/2G ex ia II; TX II 1 and 1/2, RM 6) I-x t III a/b x ta/tb III a/b, x ta III a x Ga/Gb x ia II, 0x ia II Ga; x ta/tb III a/b, x ta III a 1) vailable with pproval options,,,, G only. 2) vailable with pproval options,, and only. Not available for application type 2 "Liquids/solids interface". 3) vailable with pproval option only. ) Max. 6 bar (87 psi). 5) Not available with application type option 2. 6) Not available with Power supply option 5. 7) able length is limited to 7 000 mm (275.59 inch). 8) vailable with power supply options 1, and 6. rticle No. 7ML573-7 7 777-77 0 G H J Siemens I 01 Update 12/2017 /97
Siemens G 2018 SITRNS LVS200 urther esigns Please add "-Z" to rticle No. and specify Order code(s). nter the total insertion length in plain text description, max. 20 000 mm (787.0 inch) Stainless steel tag [100 x 5 mm (3.9 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text nhanced sensitivity > 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) 5) nhanced sensitivity < 5 g/l via electronics and increased insertion length of 25 mm (0.98 inch) and increased aluminum fork width 1)) djustable sensitivity (by potentiometer) for solids/liquids interface detection 2)3)) Signal bulb inserted in M20 cable gland 2)6) Operating Instructions Multi-language Note: the Operating Instructions should be ordered as a separate line on the order. ll literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation Spare Parts [19... 230 V, 19... 55 V, one relay output (SPT)] [19... 230 V, 19... 55 V, two relay output (PT)] Replacement lectronics Module (350 Hz) [19... 230 V, 19... 55 V, one relay output (SPT)] NMUR Isolated switch amplifier Relay output K2-SR2-x1.W Order code Y01 Y1 K05 G01 G02 20 rticle No. 7ML1998-5T63 7ML1830-1KL 535525363 7ML1830-1KM 535667901 1) vailable only with power supply 1 and pprovals,, and with process connection flange G. 2) vailable with pproval options only. 3) vailable with power supply option 1 and application type 2 only. ) Not available with option K05. 5) vailable with pplication type 1 only. 6) 20 not allowed with power supply, 5, or 6. /98 Siemens I 01 Update 12/2017
Siemens G 2018 SITRNS LVS200 imensional drawings Tine orientation marking Threaded bushing [max. temp. 80 (176 )] 120 (.72) 150 (5.91) View - 60 (2.36) 75 (2.95) Thread length SP: 20.5 (0.81) NPT: 2 (0.9) 2 (1.67) 155 (6.1) Optional sliding bushing* ustomer supplied process flange 100 (3.9) Solids/liquids interface model (11.81... 157): ustomer-specified rigid extension 100 (3.9) Solids/liquids interface model Tine 170 (6.69): Standard model 60 (2.36) 165 (6.5): ompact solids/ liquids interface model 230 (9.0): ompact standard version 300... 000 2 (1.67) Tine 195 (7.68) 170 (6.69): Standard model 700... 20 000 (27.56... 787)** Notes: * The clamping screws of the sliding bushing must be tightened to 10 Nm. ** able version with liquids/solids interface model option length to 7 000 mm (275.59 inch) able version with NMUR electronics length to 10 000 mm (393.7 inch) tightened to 10 Nm. See manual for pipe extended version details. (Pipe is customer supplied.) SITRNS LVS200, dimensions in mm (inch) Siemens I 01 Update 12/2017 /99
Siemens G 2018 SITRNS LVS200 Schematics L SH/SL adjustment Universal voltage (PT relay) 3-wire PNP Sensitivity adjustment (=factory setting, =decreased sensitivity) SH SL 1 2 3 5 larm output relay 1 2 3 5 7 8 9 1 2 3 Load L N 19... 230 V or +/- 19... 55 V Protective earth terminal P + L - N Terminal 1: L, terminal 2: N 19... 230 V, +10 %, 50... 60 Hz, 18 V Terminal 1: +, terminal 2: - 19... 55 V, +10 %, 2 W Signal output P + - Terminal 1: +, terminal 2: - 18... 50 V, +10 %, 1.5 W 2-wire NMUR I 6097-5-6 8/16 m or... 20 m P 1 2 + L - N Terminal 1: L, terminal 2: N 19... 230 V, +10 %, 50... 60 Hz, 1.5 V Terminal 1: +, terminal 2: - 19... 230 V, +10 %, 1 W P 1 2 + L - N pprox. 7... 9 V, intrinsically safe (I 6097-5-6) P 1 2 + L - N terminal 1: +, terminal 2: - 2.5... 36 V, + 0 % SITRNS LVS200 connections /100 Siemens I 01 Update 12/2017