Estmn CP 730-1 hlorinted polyolefin dhesion promoter (20% solids in romti 100 or xylene) Estmn CP 730-1 is hlorinted polyolefin dhesion promoter supplied t 20% solids in either Aromti 100 or xylene. CP 730-1 n e used s n dhesion promoter for polypropylene (PP), thermoplsti olefin (TPO), or other polypropylene-sed sustrtes. It shows exellent gsoline nd humidity resistne under oth 1-prt melmine nd 2-prt urethne-sed topots. Typil properties % Solids 20.0 % Chlorine 22.5 Grdner olor 4 Hze (ml/g-m t 700 nm) 1 Wt/vol 7.54 l/gl Properties reported here re typil of verge lots. Estmn mkes no representtion tht the mteril in ny prtiulr shipment will onform extly to the vlues given. Soluility Estmn CP 730-1 is solule in romti hydroron solvents suh s xylene, toluene, nd Aromti 100. Cyli hydroron solvents suh s methylylohexne nd ethylylohexne n e used to dilute CP 730-1. It is not solule in liphti hydrorons, esters, ketones, or lohols ut n e diluted, s supplied, with some longhined ketones nd esters, suh s methyl myl ketone nd n-utyl propionte. When diluting CP 730-1 with longhined ketones nd esters, the solutions my pper hzy. This hze does not pper to ffet the produt s ility to promote dhesion to PP or TPO. Comptiility Tle 1 shows the omptiility of Estmn CP 730-1, whih is similr to Estmn CP 343-1. For more informtion on CP 343-1, see Estmn pulition GN-424. 1
Estmn CP 730-1 hlorinted polyolefin dhesion promoter (20% solids in romti 100 or xylene) (Continued) Tle 1 Comptiility of Estmn CP 730-1 Smple # Durm 207-2706 Polym 057-5776 Polym 220-2010 Polym Desmophen 057-5789 67A 80 Prloid AU608X Arylm 232-1700 Xylene Estmn CP 730-1 (20% in A-100) d 9:1 1:1 Amient onditions Heted @ 60 C (1 h) e Rting f 1 6.26 68.8 25.0 H 2 11.26 83.8 5.0 I 3 6.26 68.8 25.0 I 4 11.26 83.8 5.0 I 5 5.88 69.2 25.0 C 6 10.58 84.4 5.0 C 7 5.88 69.2 25.0 C 8 10.58 84.4 5.0 C 9 6.66 68.4 25.0 SH 10 12.00 83.0 5.0 SH 11 6.66 68.4 25.0 SH 12 12.00 83.0 5.0 SH 13 5.88 69.2 25.0 C 14 10.58 84.4 5.0 C 15 5.88 69.2 25.0 C 16 10.58 84.4 5.0 C 21 6.26 68.8 25.0 I 22 11.26 83.8 5.0 I 23 6.26 68.8 25.0 I 24 11.26 83.8 5.0 I 25 8.34 66.6 25.0 I 26 15.00 80.0 5.0 I 27 8.34 66.6 25.0 I 28 15.00 80.0 5.0 I 29 8.34 66.6 25.0 I 30 15.00 80.0 5.0 H 31 8.34 66.6 25.0 I 32 15.00 80.0 5.0 H Resin supplied y PCCR. Resin supplied y Byer. Resin supplied y DOW Chemil. d CPO used ws Estmn CP 730-1 20% solids in Aromti 100. e Smples were heted t 60 C for 1 hour nd evluted the next dy. f Rtings for solutions: C = omptile; I = inomptile; H = hzy; SH = slightly hzy. 2
Estmn CP 730-1 hlorinted polyolefin dhesion promoter (20% solids in romti 100 or xylene) (Continued) How to use Estmn CP 730-1 is n dhesion-promoting resin tht n e used s primer for polypropylene-sed sustrtes. When used in primer pplitions, it n e used lone, or in some ses, it n e formulted with other resins to mke up the dhesion-promoting primer. CP 730-1 my lso e used s n dditive in otings, inks, or dhesives to improve dhesion to polypropylene-sed sustrtes. When using CP 730-1 s n dditive, its omptiility with the oting, ink, or dhesive will need to e determined efore use. Brief desriptions for primer nd dditive pplitions follow: Primer pplitions Clen sustrte with isopropyl lohol. Prepre Estmn CP 730-1 primers t 5% 10% solids nd pply to the sustrte t thikness of 0.1 0.3 mils (2.5 7.5 µ). Primer my e ir dried or heted t 80 C for pproximtely 10 minutes. Topots n e pplied s soon s the primer hs een dried. Additive pplitions Clen sustrte with isopropyl lohol. Add 5% 15% Estmn CP 730-1, sed on resin solids, to the oting, ink, or dhesive nd mix thoroughly. Test for omptiility or effet on dry film properties. If dequte dhesion is not otined, inrese the mount of Estmn CP 730-1 until dhesion is otined. Monitor ny effets the ddition of more CP 730-1 hs on dry film properties. Performne s primer Tle 2 Perent retined dhesion of vrious utomotive OEM topots on Sequel 1440 TPO fter exposure to Clevelnd humidity (ASTM D4585 t 58 C) Topot Coting ke temperture, C % Retined dhesion 1K/1K 120 504 100 1K/2K 120 504 100 2K/2K 80 504 100 1K/1K = 1-prt melmine-ured seot/1-prt melmine-ured lerot. 1K/2K = 1-prt melmine-ured seot/2-prt polyurethne-ured lerot. 2K/2K = 2-prt polyurethne-ured seot/2-prt polyurethne-ured lerot Tle 3 Gsoline resistne (GM 9501P Method B) on Sequel 1440 TPO Topot Coting ke temperture, C % Adhesion/ % lifted 1K/1K (silver) 120 1 100/11 1K/1K (white) 120 1 100/22 1K/1K (white) 120 1 100/23 1K/1K = 1-prt melmine-ured seot/1-prt melmine-ured lerot. Tle 4 Gsoline resistne (Ford modified Juntunen) on Sequel 1440 TPO Topot Coting ke temperture, C % Adhesion/ % lifted 1K/1K (silver) 120 1 100/0; edge 1K/2K (lue) 120 1 98/0; edge 2K/2K (white) 80 1 91/0; edge 1K/1K = 1-prt melmine-ured seot/1-prt melmine-ured lerot. 1K/2K = 1-prt melmine-ured seot/2-prt polyurethne-ured lerot. 2K/2K = 2-prt polyurethne-ured seot/2-prt polyurethne-ured lerot. 3
Estmn CP 730-1 hlorinted polyolefin dhesion promoter (20% solids in romti 100 or xylene) (Continued) Storge nd hndling Solutions of Estmn CP 730-1 my prtilly settle over time. Should these onditions our, wrming the ontents to pproximtely 38 49 C with mild gittion while keeping wy from sprks nd open flmes will generlly return the produt to its originl ondition. Wrning, stti eletriity n uild up when hndling or mixing nonpolr solvents suh s Aromti 100, xylene, or toluene users should tke pproprite preutions to eliminte stti eletriity uild up. Before using or hndling produts from Estmn or ny other suppliers, users should review ll pplile sfety informtion inluding Sfety Dt Sheets (SDS). 4
Estmn Chemil Compny Corporte Hedqurters P.O. Box 431 Kingsport, TN 37662-5280 U.S.A. Telephone: U.S.A. nd Cnd, 800-EASTMAN (800-327-8626) Other Lotions, (1) 423-229-2000 Fx: (1) 423-229-1193 Estmn Chemil Ltin Ameri 9155 South Ddelnd Blvd. Suite 1116 Mimi, FL 33156 U.S.A. Telephone: (1) 305-671-2800 Fx: (1) 305-671-2805 Estmn Chemil B.V. Fsintio Boulevrd 602-614 2909 VA Cpelle n den IJssel The Netherlnds Telephone: (31) 10 2402 111 Fx: (31) 10 2402 100 Estmn (Shnghi) Chemil Commeril Compny, Ltd. Jingn Brnh 1206, CITIC Squre No. 1168 Nnjing Rod (W) Shnghi 200041, P.R. Chin Telephone: (86) 21 6120-8700 Fx: (86) 21 5213-5255 Estmn Chemil Jpn Ltd. MetLife Aoym Building 5F 2-11-16 Minmi Aoym Minto-ku, Tokyo 107-0062 Jpn Telephone: (81) 3-3475-9510 Fx: (81) 3-3475-9515 Estmn Chemil Asi Pifi Pte. Ltd. #05-04 Winslnd House 3 Killiney Rod Singpore 239519 Telephone: (65) 6831-3100 Fx: (65) 6732-4930 www.estmn.om Although the informtion nd reommendtions set forth herein re presented in good fith, Estmn Chemil Compny mkes no representtions or wrrnties s to the ompleteness or ury thereof. You must mke your own determintion of their suitility nd ompleteness for your own use, for the protetion of the environment, nd for the helth nd sfety of your employees nd purhsers of your produts. Nothing ontined herein is to e onstrued s reommendtion to use ny produt, proess, equipment, or formultion in onflit with ny ptent, nd we mke no representtions or wrrnties, express or implied, tht the use thereof will not infringe ny ptent. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS AND NOTHING HEREIN WAIVES ANY OF THE SELLER S CONDITIONS OF SALE. Sfety Dt Sheets providing sfety preutions tht should e oserved when hndling nd storing our produts re ville online or y request. You should otin nd review ville mteril sfety informtion efore hndling our produts. If ny mterils mentioned re not our produts, pproprite industril hygiene nd other sfety preutions reommended y their mnufturers should e oserved. 2014 Estmn Chemil Compny. Estmn is trdemrk of Estmn Chemil Compny. All other rnds re the property of their respetive owners. GN-453B 1/14