INTRODUCTION THERMALBLADE products deliver an upgrade in performance to help you see better in all weather. The squeegee of all THERMALBLADES are made of silicone, which ensures greater visibility by applying a transparent silicone coating on the windshield, in effect causing continuous water beading in warm weather. Silicone also extends the life of the wiper 23 times longer than rubber. Silicone will ensure a quiet, clean wipe, pushing off rain or snow providing you with the visibility you need to be safe. During inclement winter weather the silicone is heated with our heating technology to mantain the same visibility as warm weather. Water beads up into droplets at low speeds and is easily removed with ordinary wiping. At higher speeds, wind velocity pushes the water off the windshield, often without even turning on the wipers. The silicone coating also reduces drag and eliminates annoying chattering, providing greater comfort for both driver and passenger. The THERMALBLADE Silicone Safety Wiper reapplies the silicone coating every time the wipers are used. THERMALBLADE Silicone Safety wipers maintain a sharp, clean edge and offer better resistance to all climates. Our patented heating technology activates during winter weather and the element heats to melt any falling snow or ice, eliminating icy build up. Clearly out performing the industry standard rubber blade with their durability. THERMALBLADE 2Gen is an all season silicone safety wiper. This blade provides: Replaceable and removable silicone squeegee, Low profile beam frame with Aerodynamic Spoiler Reduces Lift Heating element that resides inside the squeegee Thermostat control that heats when freezing conditions exist. Activated SiliconeCoating Action Revolutionary Beading Action Highest Quality Silicone Rubber Compound All Season Performance Ultimate Visibility in all weather.
THERMALBLADE, LLC Muncy Valley Pennsylvania www.thermalblade.com Facebook.com/thermalblade THERMALBLADE FEATURES & BENEFITS OVERVIEW FEATURES BENEFITS Silicone Blades (Easily Replaceable) All Season Performance Ensures Greater Visibility Reduces annoying chattering Heats up at or below 4 degrees C Eliminates Ice & Snow Build up Aerodynamic Spoiler Reduces Lift Increases Productivity 1 Time Install low cost to maintain Cost & Time Savings High Quality Silicone Compound Activated SiliconeCoating Action Available Fuse Block Adapter Simplified Installation Thermostatically Controlled Auto Activated Heating Element Silicone Blades (Easily Replaceable) Made of a silicone compound for lengthened durability & a clear smooth wipe. The silicone compound extends the life of the wiper 23 times longer than rubber and produces active silicone coating action while rubbing against the windshield while wiping. Silicone provides higher performance in all seasons. Ensures Greater Visibility During warmer months the silicone squeegee works as exceptional high performance blade. During colder months the squeegee is heated to prevent snow and ice buildup, adding increased safety and visibility to the driver. Heats up at or below 4 degrees C Our patented heating technology uses a thermostat control to draw power from the power source when the outside temperature falls to 38 degrees F or below Aerodynamic Spoiler Reduces Lift By harnessing the wind velocity while driving the THERMALBLADE Frame will stay firmly against the windshield, the aerodynamic spoiler reduces lift and increases wipe pressure on the windshield. 1 Time Install low cost to maintain The Frame and heating element in designed to last as long as the vehicle, convenience of changing the squeegee and not the entire system also reduces waste and cost. Replacement Squeegee is sold at retail precut sized lengths for $13.99 or in lengths at $5.00 per foot. Available Fuse Block Adapter For the ease of installation an addacircuit fuse block adapter is available in ACS, ACN and ACU style fuses. THERMALBLADE SAFETY WIPER adds safety to the driver of a vehicle, increases productivity of fleet operators, reduces chattering of a lifting wiper, saves money for the drivers and company maintaining the vehicles, eliminates ice and snow buildup. Over all THERMALBLADE Clearly out performs traditional wipers.
THERMALBLADE TECHNICAL SPECIFICATION VISUAL A1 JHook Arm A2 Slide Pin Arm A3 I&L Pinch Tab Arm A4 Point Lock Arm A5 Rock Lock Arm A6 Boyonnette Arm A7 Pinch Tab Button Arm NA1 JHook Arm ADAPTER PART #s A1 A5 A2 A6 A3 A7 A4 NA1 MULTI 1 PART 10 Rubber Cover Boot PART #13Thermostat Actives as temp drops below 38 F or 4 C o 7 o PART#11 Metal Frame Attachment 2 3 Plastic Slide Rail 5 4 PART#12 Plastic Rib Frame 6 PART #s TB12 TB19 TB13 TB20 TB14 TB21 TB15 TB22 TB16 TB24 TB17 TB26 TB18 TB28 PART#TB10 Silicone Squeegee PART#element Heating element 8 9
THERMALBLADE TECHNICAL SPECIFICATION DETAIL 1 Adapter Molded Hard Plastic Clip adapter attaches the THERMALBLADE to the wiper arm. Various adapters are available to fit many different wiper arm styles. 2 Rubber Cover Boot Top cover layer of the wiper that is exposed to the elements. Made of durable high quality rubber compound. This boot has an aerodynamic spoiler which helps utilize wind velocity to reduce lift. 3 4 5 6 7 8 9 Metal Frame Attachment Interlocks the frame rib and the cover boot together and attaches to the wiper arm clip adapter. Made of high quality light weight metals for over all strength and performance. Plastic Rib frame Ribbed construction allows the wiper to bend and form to the curves of the windshield. The Rib Frame is also what holds the plastic slide rail for the squeegee. Made of high quality plastics for durability. Plastic Slide Rail Removeable & replaceable part of the wiper frame which holds the squeegee in place. No hinge construction allows the squeegee to sweep back and forth while wiping. Silicone Squeegee Made of a silicone compound for lengthened durability and a clear smooth wipe. The silicone compound extends the life of the wiper 23 times longer than rubber & produces active silicone coating action while rubbing against the windshield while wiping. Thermostat is installed inline along the wiring harness and is mounted under the wiper arm on the outside of the vehicle. Once the Thermostat detects temperatures below 38 degrees F or 4 degrees C the thermostat draws power from switched power source and activates the heating element. Heating element is encased in a silicone casing for added durability and extended life. this encased elemtn sits within the squeegee itself and is no more than 1/8 of an inch from the windsheilds surface during the wiping action. Wiring harness has 8 feet of 22 gauge black ground wire and 10 feet of 22 gauge red power wire. During installation if more wire is needed crimp 1 butt connector per wire with 22 gauge extention wire. 22 gauge wire used = (7 strands of 30 gauge wire) THERMALBLADE,LLC Muncy Valley PA 17758 Thermalblade.com Facebook.com/thermalblade john@thermalblade.com (570) 9464344
INSTALLATION INSTRUCTIONS Packaged Items included (1) THERMALBLADE HEATED SAFETY WIPER (1) HEATING ELEMENT AND WIRING HARNESS (INSTALLED) (1) REPLACEABLE SQUEEGEE (INSTALLED) (1) UNIVERSAL WIPER ARM ADAPTER INSTRUCTIONS. THE END OF AN ICE AGE! THERMALBLADE Heated Silicone Safety Blade is a year round blade. Equipped with a special heated element for safe winter driving, Designed for 12 volt system ONLY! (24 Volt System is availablae on special order) The wiring of the wipers is simple. Clean, Smooth Wipe! This could be done many ways the following steps are suggested. Exterior: 1. Attach wipers to the wiper arm (adapter instructions are included in Package) 2. Feed the ground wire and power wire from the wipers into the engine compartment by following the wiper arm to the wiper motor pivot point 3. Wire tie the wire on the underside of the wiper arm 4. Leave a little slack at the wiper pivot point. Engine Compartment: 5. Using wire ties layout your wires in the engine compartment. Train your wires to reach the auxillary power supply fuse panel. 6. Remove the lid of the fuse box 7. Find a Switched fuse that is only powered when the key is turned to the ON Position 8. Remove a fuse identified as a switched source of power Plug the fuse into the bottom port of a fuse block adapter as shown in the illustration. 9. Crimp the two power leads from the wiper into the fuse block adapter. 10. Plug in a 10 amp fuse to the top port of the fuse block adapter 11. Insert the fuse block adapter where your original fuse had been 12. Ground the wipers to a solid metal part of the vehicle. 13. Close the lid of the fuse box 14. Close the hood No additional steps are nessesary Enjoy clear visibility: When the thermostat drops below 38 Degrees F the wiper will activate automatically, this is your switch. Close the hood and wait for freezing conditions to watch the wiper free itself from ice and frost and eliminate ice and snow build up while driving. This Thermal Image of the blade shows you have Heat right where you need it. Melts Ice and Snow, No more Build Up or Icey Obstructions!
@THERMALBLADE Features an Aerodynamic Spoiler Which Reduces Lift Silicone Squeegee The THERMALBLADE has less waste by offering a reuseable Frame. Remove and Replace with a new squeegee when needed at a FRACTION of the cost of any traditional wiper blade... Features Benefits Silicone Blades (Easily Replaceable) All Season Performance 1 Time Install low cost to maintain Cost & Time Savings Thermostatically Controlled Auto Activated Heating Element Aerodynamic Spoiler Reduces Lift Reduces annoying chattering High Quality Silicone Compound Activated SiliconeCoating Action Available Fuse Block Adapter Simplified Installation Ensures Greater Visibility Increases Productivity Heats up at or below 4 degrees C Eliminates Ice & Snow Build up THERMALBLADE.COM PINTEREST.COM/THERMALBLADE Compatible w/ Personal & Construction Vehicles. Compatible w/ Fleet Vehicles. FACEBOOK.COM/THERMALBLADE Thermostatically controlled. When Freezing conditions exist the THERMALBLADE begins to heat the element at 4 degrees C or below Heating Element sits within the Squeegee less than 1/4 inch from the windsheild surface providing ample heat right where its needed. (3 vehicle Fleet) (Current = Change wipers 3 X per Year) (at 13.99 per wiper) Rubber wipers Total Cost (5 Years) THERMALBLADE Total Cost (5 Years) $1,259.10 $710.00 5 Year Savings with THERMALBLADE $1,400.00 $1,200.00 Year 5 $251.82 Year 4 $1,000.00 $800.00 $251.82 $600.00 $251.82 $400.00 $251.82 $200.00 $ $549.10 $55.00 $55.00 Year 3 Year 2 $600.00 $251.82 RUBBER WIPER BLADES THERMALBLADE SILICONE SAFETY WIPER Year 1 $ Blade Size Amps Per 12 13 14 15 16 17 18 19 20 21 22 24 26 28 1.45 1.57 1.69 1.82 1.94 2.06 2.18 2.30 2.42 2.54 2.67 2.90 3.16 3.40
PricingGuideTHERMALBLADE 201415_091 Wholesale www.thethermalblade.com THERMALBLADE facebook.com/thermalblade (570)9464344 Office (570)9464555 Product Numbers Component ITEMIZED RETAIL THERMALBLADE HEATED BLADES LP1012 12" Thermalblade $74.99 LP1013 13" Thermalblade $74.99 LP1014 14" Thermalblade $74.99 LP1015 15" Thermalblade $74.99 LP1016 16" Thermalblade $74.99 LP1017 17" Thermalblade $74.99 LP1018 18" Thermalblade $74.99 LP1019 19" Thermalblade $74.99 LP1020 20" Thermalblade $74.99 LP1021 21" Thermalblade $74.99 LP1022 22" Thermalblade $74.99 LP1024 24" Thermalblade $74.99 LP1026 26" Thermalblade $74.99 LP1028 28" Thermalblade $74.99 LP1030 AVAILABLE SPECIAL ORDER 30" Thermalblade $95.00 LP1032 AVAILABLE SPECIAL ORDER 32" Thermalblade $95.00 ACCESSORIES HKATM hardware kit ATM Mini Fuse $14.95 HKATT hardware kit ATT Mini Fuse low Profile $14.95 HKATC hardware kit ATC Standard Fuse $14.95 ATM ATM Add A Circuit with 10 amp Fuse $9.99 ATT ATT Add A Circuit with 10 amp Fuse $9.99 ATC ATC Add A Circuit with 10 amp Fuse $9.99 TBE2 EXTENDED WARRANTY per pair $60.00 LOOSE SQUEEGEE REPLACEMENTS TB1012 Squeegee Replacements 12 " $5.88 TB1013 Squeegee Replacements 13 " $6.37 TB1014 Squeegee Replacements 14 " $6.86 TB1015 Squeegee Replacements 15 " $7.35 TB1016 Squeegee Replacements 16 " $7.84 TB1017 Squeegee Replacements 17 " $8.33 TB1018 Squeegee Replacements 18 " $8.82 TB1019 Squeegee Replacements 19 " $9.31 TB1020 Squeegee Replacements 20 " $9.80 TB1021 Squeegee Replacements 21 " $10.29 TB1022 Squeegee Replacements 22 " $10.78 TB1024 Squeegee Replacements 24 " $11.76 TB1026 Squeegee Replacements 26 " $12.74 TB1028 Squeegee Replacements 28 " $13.72
PricingGuideTHERMALBLADE 201415_091 Wholesale www.thethermalblade.com THERMALBLADE facebook.com/thermalblade (570)9464344 Office (570)9464555 Product Numbers Component ITEMIZED RETAIL COMPLETE REPLACEMENT SLIDE RAIL RS1012 Slide Rail with end clip packaged Squeegee Replacements 12 " $7.44 RS1013 Slide Rail with end clip packaged Squeegee Replacements 13 " $8.06 RS1014 Slide Rail with end clip packaged Squeegee Replacements 14 " $8.68 RS1015 Slide Rail with end clip packaged Squeegee Replacements 15 " $9.30 RS1016 Slide Rail with end clip packaged Squeegee Replacements 16 " $9.92 RS1017 Slide Rail with end clip packaged Squeegee Replacements 17 " $10.54 RS1018 Slide Rail with end clip packaged Squeegee Replacements 18 " $11.16 RS1019 Slide Rail with end clip packaged Squeegee Replacements 19 " $11.78 RS1020 Slide Rail with end clip packaged Squeegee Replacements 20 " $12.40 RS1021 Slide Rail with end clip packaged Squeegee Replacements 21 " $13.02 RS1022 Slide Rail with end clip packaged Squeegee Replacements 22 " $13.64 RS1024 Slide Rail with end clip packaged Squeegee Replacements 24 " $14.88 RS1026 Slide Rail with end clip packaged Squeegee Replacements 26 " $16.12 RS1028 Slide Rail with end clip packaged Squeegee Replacements 28 " $17.36 THERMALBLADE UNHEATED BLADES UN21012 12" Thermalblade Unheated $37.50 UN21013 13" Thermalblade Unheated $37.50 UN21014 14" Thermalblade Unheated $37.50 UN21015 15" Thermalblade Unheated $37.50 UN21016 16" Thermalblade Unheated $37.50 UN21017 17" Thermalblade Unheated $37.50 UN21018 18" Thermalblade Unheated $37.50 UN21019 19" Thermalblade Unheated $37.50 UN21020 20" Thermalblade Unheated $37.50 UN21021 21" Thermalblade Unheated $37.50 UN21022 22" Thermalblade Unheated $37.50 UN21024 24" Thermalblade Unheated $37.50 UN21026 26" Thermalblade Unheated $37.50 UN21028 28" Thermalblade Unheated $37.50
Client Input Avg Per Vehicle Savings per year Number Of Vehicles in Fleet $70.55 Cost Per Wiper Currently 2 $ 14.99 Cost Per Vehicle (1 Pair) $29.98 Fleet Current Wiper Cost (1 Pair cost (X) # of Vehciles) ROI MODEL WORK UP FOR FLEET OF 2 VEHICLES OPTION Basic Option Frequency Of Wiper Changes/Year 4 Fleet Current Wipers/year (frequency (X) 2 (X) # of Vehciles) $59.96 16 Avg Fleet Savings Per Year $141.10 Average Wiper Size In Inches 22 #N/A Over all 3 year Savings Thermalblade Pricing and Warranty Options Basic Option Per Vehicle Cost for 2 wipers & Hardware Installation Kit Single Cost for THERMALBLADE Replacement Squeegee @ $4.25 per ft $9.17 Over all 5 year Savings $322.68 $705.49 $ Thermalblade Per Unit Price 74.99 $ 149.98 $ 149.98 RUBBER WIPER BLADES Your Average Fleet costs for wipers currently, with out heating technology THERMALBLADE HEATED SILICONE SAFETY WIPER Average Fleet costs with THERMALBLADE YEAR 1 YEAR 2 YEAR 3 YEAR 4 YEAR 5 5 Year Totals Summary Installation Wipers 599.60 Vehicles Cost 599.60 Your Current Cost Calculation is Not Factoring in: Loss of Time and Production from pulling off the road to clear the windshield of snow and ice Loss of Revenue from a driver not being able to get back in traffic or having to be towed out of a ditch Safety Risk & Loss of Revenue due to Accidents from low visibility Loss of Revenue from Broken Windshields Per Year Fleet Year 1 cost Average times changed per year Per Unit Per Vehicle Per Year/vehicle Fleet Year 1 cost $ $ 239.84 Average cost for Wiper blades $ 74.99 $ 149.98 $ 149.98 $ 299.96 $ $ $ $ Per Vehicle Per Year Fleet Year 2 cost Average times changed per year Per Unit Per Vehicle Per Year Fleet Year 2 cost $ $ 239.84 Average cost for Wiper blades $ $ $ $ 48.44 Per Year Fleet Year 3 cost Average times changed per year Per Unit Per Vehicle Per Year Fleet Year 3 cost $ $ 239.84 Average cost for Wiper blades $ $ $ $ 48.44 Per Year Fleet Year 4 cost Average times changed per year Cost Per Unit Per Vehicle Per Year Fleet Year 4 cost $ $ 239.84 Average cost for Wiper blades $ $ $ $ 48.44 Per Year Fleet Year 5 cost Average times changed per year Cost Per Unit Per Vehicle Per Year Fleet Year 5 cost $ $ 239.84 Average cost for Wiper blades $ $ $ $ 48.44 Vehicle Costs Fleet Costs 5 Year Totals Summary Vehicle Costs Fleet Costs $ $ Installation $ $ 1,199.20 Heated Wiper System $ 149.98 $ 299.96 $ $ Squeegee Replacement $ 96.88 $ 193.75 $ $ 1,199.20 Vehicles Cost $ 246.86 $ 493.71 THERMALBLADE Cost Savings Calculation is Not Factoring in: Tremendous increase in Driver's Safety Increase in production Increased Visibility Convenience of an all season Blade with Simplified Maintenance due to the replaceable squeegee
Client Input Avg Per Vehicle Savings per year Number Of Vehicles in Fleet $70.55 Cost Per Wiper Currently 50 $ 14.99 Cost Per Vehicle (1 Pair) $29.98 Fleet Current Wiper Cost (1 Pair cost (X) # of Vehciles) ROI MODEL WORK UP FOR FLEET OF 50 VEHICLES OPTION Basic Option Frequency Of Wiper Changes/Year 4 Fleet Current Wipers/year (frequency (X) 2 (X) # of Vehciles) $1,499.00 400 Avg Fleet Savings Per Year $3,527.43 Average Wiper Size In Inches 22 #N/A Over all 3 year Savings Thermalblade Pricing and Warranty Options Basic Option Per Vehicle Cost for 2 wipers & Hardware Installation Kit Single Cost for THERMALBLADE Replacement Squeegee @ $4.25 per ft $9.17 Over all 5 year Savings $8,067.06 $17,637.13 $ Thermalblade Per Unit Price 74.99 $ 149.98 $ 149.98 RUBBER WIPER BLADES Your Average Fleet costs for wipers currently, with out heating technology THERMALBLADE HEATED SILICONE SAFETY WIPER Average Fleet costs with THERMALBLADE YEAR 1 YEAR 2 YEAR 3 YEAR 4 YEAR 5 5 Year Totals Summary Installation Wipers 599.60 Vehicles Cost 599.60 Your Current Cost Calculation is Not Factoring in: Loss of Time and Production from pulling off the road to clear the windshield of snow and ice Loss of Revenue from a driver not being able to get back in traffic or having to be towed out of a ditch Safety Risk & Loss of Revenue due to Accidents from low visibility Loss of Revenue from Broken Windshields Per Year Fleet Year 1 cost Average times changed per year Per Unit Per Vehicle Per Year/vehicle Fleet Year 1 cost $ $ 5,996.00 Average cost for Wiper blades $ 74.99 $ 149.98 $ 149.98 $ 7,499.00 $ $ $ $ Per Vehicle Per Year Fleet Year 2 cost Average times changed per year Per Unit Per Vehicle Per Year Fleet Year 2 cost $ $ 5,996.00 Average cost for Wiper blades $ $ $ $ 1,210.97 Per Year Fleet Year 3 cost Average times changed per year Per Unit Per Vehicle Per Year Fleet Year 3 cost $ $ 5,996.00 Average cost for Wiper blades $ $ $ $ 1,210.97 Per Year Fleet Year 4 cost Average times changed per year Cost Per Unit Per Vehicle Per Year Fleet Year 4 cost $ $ 5,996.00 Average cost for Wiper blades $ $ $ $ 1,210.97 Per Year Fleet Year 5 cost Average times changed per year Cost Per Unit Per Vehicle Per Year Fleet Year 5 cost $ $ 5,996.00 Average cost for Wiper blades $ $ $ $ 1,210.97 Vehicle Costs Fleet Costs 5 Year Totals Summary Vehicle Costs Fleet Costs $ $ Installation $ $ 29,980.00 Heated Wiper System $ 149.98 $ 7,499.00 $ $ Squeegee Replacement $ 96.88 $ 4,843.87 $ $ 29,980.00 Vehicles Cost $ 246.86 $ 12,342.87 THERMALBLADE Cost Savings Calculation is Not Factoring in: Tremendous increase in Driver's Safety Increase in production Increased Visibility Convenience of an all season Blade with Simplified Maintenance due to the replaceable squeegee