RIA - VAC SYSTEM
RIA - VAC ASSEMBLY-DIRECTIONS FOR DN 200-250-300 mm RIA VAC LIQUID MANURE DISCHARGE SYSTEM PLAN LONGITUDINAL SECTION (Pipeline with closure cover) PLAN LONGITUDINAL SECTION (Pipeline with Sliding valve) 50-60 cm 80-100 cm 20cm 20 cm System with sump at right angle to direction of drain System with sump consisting of a plastic ring at exit of the system SECTION DIRECTION: Drop on liquid manure pipes with T-pieces 1. From T-piece with ventilation system until the end of the building against front tank: From 0 to 25-30 m, 0,5% drop (5 mm per m). 2. From 0 to 50-60 m, 0,8% drop (8 mm per m). 3. From 0 to 80-90 m, 1,0% drop (10 mm per m). 4. Straight pipe/main pipe is laid with min. 1,0% drop against front tank. NB! Remember before 1st use: Wash the pipeline and test for tightness. Fill with water until 5 cm over bottom. VENTILATION SYSTEM
RIA - VAC SYSTEM T- PIECES FOR VACUM-LIQUID MANURE DISCHARGE SYSTEM Water-discharge-examined and certified by the Danish Housing Ministry DN200 RIA VAC T-Piece with Sockets for PVC pipe Item No. R601 51 200 Type 1 EUR 55,00 Item No. R602 51 200 Type 2 EUR 60,00 Item No. R603 51 200 Type 3 EUR 65,00 Item No. R604 51 200 Type 4 EUR 70,00 Type 1 DN250 RIA VAC T-Piece with Sockets for PVC pipe Item No. R601 51 250 Type 1 EUR 75,00 Item No. R602 51 250 Type 2 EUR 83,00 Item No. R603 51 250 Type 3 EUR 90,00 Item No. R604 51 250 Type 4 EUR 98,00 Type 1 DN300 RIA VAC T-Piece with Sockets for PVC pipe Item No. R601 51 315 Type 1 EUR 100,00 Item No. R602 51 315 Type 2 EUR 107,00 Item No. R603 51 315 Type 3 EUR 115,00 Item No. R604 51 315 Type 4 EUR 125,00 Type 1 RIA VAC Closure Cover Polymer concrete Item No. R710 9 200 DN200 EUR 25,00 Item No. R710 9 250 DN250 EUR 35,00 Item No. R710 9 315 DN300 EUR 40,00 Hook Item No. R700 Stainless steel EUR 18,00 OUTLET WITH CLOSURE COVER Preparation for cover. Total height 50 cm. Item No. R800 11 200 DN200 EUR 55,00 Item No. R800 11 250 DN250 EUR 60,00 Item No. R800 11 315 DN300 EUR 75,00 Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 4
RIA - VAC SYSTEM STICK ON PIECE For PVC pipe. With Closure Cover Polymer concrete. With Concrete tightening ring of rubber. DN200 RIA VAC Stick On Piece Item No. R621 51 200 Type 1 EUR 51,00 Item No. R622 51 200 Type 2 EUR 55,00 Item No. R623 51 200 Type 3 EUR 59,00 Item No. R624 51 200 Type 4 EUR 65,00 DN250 RIA VAC Stick On Piece Item No. R621 51 250 Type 1 EUR 65,00 Item No. R622 51 250 Type 2 EUR 72,00 Item No. R623 51 250 Type 3 EUR 80,00 Item No. R624 51 250 Type 4 EUR 89,00 DN300 RIA VAC Stick On Piece Item No. R621 51 315 Type 1 EUR 86,00 Item No. R622 51 315 Type 2 EUR 93,00 Item No. R623 51 315 Type 3 EUR 101,00 Item No. R624 51 315 Type 4 EUR 110,00 STICK ON PIECE For PVC pipe. DN200 RIA VAC Stick On Piece Item No. R611 51 200 Type 1 EUR 34,00 Item No. R612 51 200 Type 2 EUR 37,00 Item No. R613 51 200 Type 3 EUR 41,00 Item No. R614 51 200 Type 4 EUR 45,00 DN250 RIA VAC Stick On Piece Item No. R611 51 250 Type 1 EUR 44,00 Item No. R612 51 250 Type 2 EUR 48,00 Item No. R613 51 250 Type 3 EUR 54,00 Item No. R614 51 250 Type 4 EUR 60,00 DN300 RIA VAC Stick On Piece Item No. R611 51 315 Type 1 EUR 61,00 Item No. R612 51 315 Type 2 EUR 67,00 Item No. R613 51 315 Type 3 EUR 74,00 Item No. R614 51 315 Type 4 EUR 81,00 Item No. R600 PVC Glue tube EUR 23,00 (10 pcs. Stick On Pieces = 1 tube) Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 5
RIA - VAC SYSTEM ACCESSORIES FOR VACUM-LIQUID MANURE DISCHARGE SYSTEM T-Piece with 3 sockets PVC Item No. R640 51 200 DN200 EUR 60,00 Item No. R640 51 250 DN250 EUR 90,00 Item No. R640 51 315 DN300 EUR 100,00 End Cover (for T-Piece) Item No. R661 51 200 DN200 EUR 5,00 Item No. R661 51 250 DN250 EUR 20,00 Item No. R661 51 315 DN300 EUR 40,00 End Cover with DN100 and DN150 socket for ventilation PVC with DN100 socket Item No. R662 51 200 DN200 EUR 15,00 Item No. R662 51 250 DN250 EUR 35,00 Item No. R662 51 315 DN300 EUR 45,00 with DN150 socket Item No. R663 51 200 DN200 EUR 25,00 Item No. R663 51 250 DN250 EUR 60,00 Item No. R663 51 315 DN300 EUR 70,00 Double socket with DN100 and DN150 socket for ventilation PVC with DN100 socket Item No. R152 51 200 DN200 EUR 60,00 Item No. R152 51 250 DN250 EUR 73,00 Item No. R152 51 315 DN300 EUR 88,00 with DN150 socket Item No. R153 51 200 DN200 EUR 65,00 Item No. R153 51 250 DN250 EUR 75,00 Item No. R153 51 315 DN300 EUR 90,00 Ventilation Valve with socket Item No. R691 51 110 DN100 EUR 40,00 Item No. R691 51 160 DN150 EUR 55,00 Flap Valve in the pre storage tank Item No. R692 51 200 DN200 EUR 335,00 Item No. R692 51 250 DN250 EUR 350,00 Item No. R692 51 315 DN300 EUR 415,00 Item No. R692 51 400 DN400 EUR 555,00 Passage manschette for concrete tank / Item No. R200 11 50 DN50/75 LSK960 EUR 23,00 Item No. R200 11 75 DN75/101 LSK960 EUR 31,75 Item No. R200 11 110 DN110/138 LSK960 EUR 34,00 Item No. R200 11 125 DN125/151 LSK960 EUR 35,00 Item No. R200 11 160 DN160/186 LSK960 EUR 40,50 Item No. R200 11 200 DN200/226 LSK960 EUR 43,25 Item No. R200 11 250 DN250/276 LSK960 EUR 52,75 Item No. R200 11 315 DN315/341 LSK960 EUR 61,00 Item No. R200 11 400 DN400/426 LSK960 EUR 104,00 Lubricant Item No. R135 Tube 500 g EUR 5,40 Water trap with ventilation In the prestorage tank Model 1 Item No. R751 51 250 DN250 EUR 320,00 Item No. R751 51 315 DN300 EUR 385,00 In the prestorage tank Model 2 Item No. R752 51 250 DN250 EUR 730,00 Item No. R752 51 315 DN300 EUR 760,00 Model 1 Model 2 Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint.. Page 6
RIA - VAC SYSTEM Pipe PVC Length 6,0 metre Price per. metre Item No. R100 51 110 DN100 SN4 EUR 5,50 Item No. R100 51 160 DN150 SN4 EUR 6,25 Item No. R100 51 200 DN200 SN4 EUR 10,25 Item No. R100 51 250 DN250 SN4 EUR 16,50 Item No. R100 51 315 DN300 SN4 EUR 25,75 Item No. R100 51 400 DN400 SN4 EUR 42,00 Bend 15º PVC Item No. R215 51 110 DN100 SN4 EUR 1,50 Item No. R215 51 160 DN150 SN4 EUR 4,00 Item No. R215 51 200 DN200 SN4 EUR 8,50 Item No. R215 51 250 DN250 SN4 EUR 21,00 Item No. R215 51 315 DN300 SN4 EUR 32,30 Item No. R215 51 400 DN400 SN4 EUR 107,50 Bend 30º PVC Item No. R230 51 110 DN100 SN4 EUR 1,65 Item No. R230 51 160 DN150 SN4 EUR 4,25 Item No. R230 51 200 DN200 SN4 EUR 7,50 Item No. R230 51 250 DN250 SN4 EUR 22,90 Item No. R230 51 315 DN300 SN4 EUR 34,00 Item No. R230 51 400 DN400 SN4 EUR 110,00 Bend 45º PVC Item No. R245 51 110 DN100 SN4 EUR 1,80 Item No. R245 51 160 DN150 SN4 EUR 4,80 Item No. R245 51 200 DN200 SN4 EUR 6,75 Item No. R245 51 250 DN250 SN4 EUR 23,00 Item No. R245 51 315 DN300 SN4 EUR 36,50 Item No. R245 51 400 DN400 SN4 EUR 110,00 Bend 87º PVC Item No. R290 51 110 DN100 SN4 EUR 2,00 Item No. R290 51 160 DN150 SN4 EUR 6,00 Item No. R290 51 200 DN200 SN4 EUR 8,00 Item No. R290 51 250 DN250 SN4 EUR 27,00 Item No. R290 51 315 DN300 SN4 EUR 40,50 Item No. R290 51 400 DN400 SN4 EUR 223,00 Reduction PVC Item No. R361 51 250 DN250/200 SN4 EUR 24,00 Item No. R361 51 315 DN300/250 SN4 EUR 40,00 Item No. R361 51 400 DN400/300 SN4 EUR 78,00 Branch pipe 45º PVC Item No. R400 51 110 DN100/100 SN4 EUR 3,90 Item No. R400 51 160 DN150/150 SN4 EUR 9,25 Item No. R400 51 200 DN200/200 SN4 EUR 15,50 Item No. R400 51 250 DN250/250 SN4 EUR 49,50 Item No. R400 51 315 DN300/300 SN4 EUR 168,75 Item No. R400 51 400 DN400/400 SN4 EUR 266,00 Double Branch pipe 45º PVC Item No. R470 51 250 DN250/250 SN4 EUR 192,00 Item No. R470 51 315 DN300/300 SN4 EUR 263,00 Double sockets PVC Item No. R150 51 110 DN100 SN4 EUR 1,90 Item No. R150 51 160 DN150 SN4 EUR 4,25 Item No. R150 51 200 DN200 SN4 EUR 6,00 Item No. R150 51 250 DN250 SN4 EUR 23,75 Item No. R150 51 315 DN300 SN4 EUR 38,00 Item No. R150 51 400 DN400 SN4 EUR 65,50 Reduction PVC Item No. R300 51 200 DN200/200 SN4 EUR 40,50 Item No. R300 51 250 DN250/250 SN4 EUR 51,50 Item No. R300 51 315 DN300/300 SN4 EUR 73,00 Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 7
RIA VAC SYSTEM LIQUID MANURE DISCHARGE SYSTEMS FOR MINK Vacuum - Discharge system Scrape Iron for mink channel Materials: EN 1.4301 (A2)/PEHD Item No. R590 50 100 EUR 58,00 Back flush system Mink Channel Bracket galvanized Item No. R590 50 110 Length 640 mm EUR 14,50 Closure Cover DN150 (Vacuum system) Materials: Polymer concrete Item No. R590 50 160 DN150 EUR 28,00 Closure Cover DN250 (Back flush system) Materials: PEHD and tightening EPDM rubber Item No. R590 50 250 DN250 EUR 45,00 End Cover for mink channel Item No. R590 51 155 EUR 14,50 Stick On Piece DN150 (Vacuum system) Materials: PEHD and tightening EPDM rubber Item No. R590 51 160 DN150 EUR 40,50 Item No. R600 PVC Glue EUR 25,50 (10 Stick on pieces = 1 Tube) Mink Channel width 355 mm Item No. R590 50 355 per meter EUR 13,75 90 cm Mink Channel with DN150 outlet (Vacuum system) Item No. R590 52 160 EUR 71,00 Mink Channel width 355 mm Item No. R590 50 355 per meter EUR 13,75 90 cm Mink Channel with DN250 outlet (Back flush system) Item No. R590 52 250 EUR 71,00 Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 8
RIA PUMP SYSTEMS between prestorage tank and storage tank Dry installed liquid manure pump in PE container 100% Waterproof. Engine from 1.5 to 18.5 KW. Provide pumping form pig stalls directly to the manure storage tank. Price on request. Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 9
RIA PUMP SYSTEMS prestorage tank and storage tank HP! Pattern drawing Other solutions on request Everything in one - non-freezing system non-freezing slidegate valve - pump intake pipe with clutch - complete with coupling socket (complete welding system). Materials: HDPE Stainless steel PROPOSAL FOR SOLUTION WITH PUMP SYSTEM FOR SEVERAL LIQUID MANURE TANKS RIA 3-Way Valve TVB, No. 3 Materials: HDPE Stainless steel RIA Two-Way Valve system, No. 4 Materials: HDPE Stainless steel Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 10
RIA PUMP SYSTEMS 1 2 3 4 5 1 Overflow pumping pipe Materials: HDPE, PN6 Item No. R850 67 160 DN150 EUR 360,00 Item No. R850 67 200 DN200 EUR 535,00 2 Overflow pumping pipe Materials: HDPE, PN6 Item No. R851 67 160 DN150 EUR 405,00 Item No. R851 67 200 DN200 EUR 605,00 3 Combined sucking & overflow pumping pipe With hose flange/clutch, slide valve and flap valve Materials: HDPE, PN6 Item No. R855 67 160 DN150 EUR 585,00 Item No. R855 67 200 DN200 EUR 795,00 4 Combined sucking & overflow pumping pipe With hose flange/clutch, slide valve and flap valve Materials: HDPE, PN6 Item No. R857 67 160 DN150 EUR 890,00 Item No. R857 67 200 DN200 EUR 1.250,00 5 Combined sucking & overflow pumping pipe With galvanised HK Clutch connection and flap valve at ventilation Materials: HDPE, PN6 Item No. R859 67 160 DN150 EUR 720,00 Item No. R859 67 200 DN200 EUR 1.180,00 Extension for overflow pumping pipe Surcharge during tubing extension Item No. R861 67 160 Item No. R861 67 200 DN150 DN200 Cost per metre of extension Cost per metre of extension EUR 24,00 EUR 37,00 Telescopic, highly galvanized fitting, suitably for all tank models Item No. R860 EUR 235,00 Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 11
RIA PUMP SYSTEMS 1 2 3 4 5 6 7 8 9 1 Non-freezing system With Bauer connection/hose flange Materials: HDPE, PN10 Item No. R840 67 110 DN100 EUR 590,00 Item No. R840 67 160 DN150 EUR 720,00 Item No. R840 67 200 DN200 EUR 1.020,00 2 Non-freezing system With Bauer connection/hose flange Materials: HDPE, PN10 Item No. R841 67 160 DN150 EUR 755,00 Item No. R841 67 200 DN200 EUR 1.080,00 3 RIA TVB 3-Way-Valve Not watertight at valve plate. For assembly with not visible tubing system. Including 1 meter of operating device and loose angle key. Materials: HDPE 100. Knife: Stainless steel EN 1,4301 Item No. V510 74 110 DN100 EUR 265,00 Item No. V510 74 125 DN125 EUR 285,00 Item No. V510 74 160 DN150 EUR 350,00 Item No. V510 74 200 DN200 EUR 460,00 4 Two-way system with pressure valve Materials: HDPE, PN6 Item No. R842 67 160 DN150 EUR 905,00 Item No. R842 67 200 DN200 EUR 1.150,00 5 Pump with bend 45 With Bauer connection Materials: HDPE, PN10 Item No. R870 67 160 DN150 without socket EUR 240,00 Item No. R871 67 160 DN150 with socket EUR 310,00 Item No. R870 67 200 DN200 without socket EUR 450,00 6 Pump with branch 45 With Bauer connection Materials: HDPE, PN10 Item No. R872 67 160 DN150 without socket EUR 280,00 Item No. R873 67 160 DN150 with socket EUR 390,00 Item No. R872 67 200 DN200 without socket EUR 500,00 7+8 Suction tube With Bauer connection Materials: HDPE, PN10 Item No. R874 67 160 DN150 straight EUR 235,00 Item No. R875 67 160 DN200 with bend EUR 305,00 9 Extended branch pipe Materials: HDPE, PN10 Item No. R877 67 110 DN100 without socket EUR 105,00 Item No. R877 67 160 DN150 without socket EUR 120,00 Item No. R878 67 160 DN150 with socket EUR 230,00 Item No. R877 67 200 DN200 without socket EUR 190,00 Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint. Page 12
RIA PUMP SYSTEMS Pressure pipe PN10 PVC with socket. Length 6.0 m. Item No. R100 71 110 DN100 EUR 8,60/mtr Item No. R100 71 160 DN150 EUR 17,80/mtr Item No. R100 71 225 DN225 EUR 37,50/mtr Pressure bend 22 o /30 o PN10 PVC Materials: PN10 PVC Item No. R230 71 110 DN100 EUR 13,80 Item No. R230 71 160 DN150 EUR 42,75 Item No. R231 71 225 DN225 EUR 127,50 Pressure bend 45 PN10 PVC Materials: PN10 PVC Item No. R245 71 110 DN100 EUR 16,55 Item No. R245 71 160 DN150 EUR 47,85 Item No. R245 71 225 DN225 EUR 150,75 Pressure bend 90 PN10 PVC Materials: PN10 PVC Item No. R290 71 110 DN100 EUR 25,60 Item No. R290 71 160 DN150 EUR 76,30 Item No. R290 71 200 DN225 EUR 258,50 Pressure sockets PN10 PVC Materials: PN10 PVC Item No. R150 71 110 DN100 EUR 9,00 Item No. R150 71 160 DN150 EUR 23,50 Item No. R150 71 225 DN225 EUR 59,80 Pressure tee 90 PN10 PVC with 3 sockets Item No. R640 71 110 DN100 EUR 68,65 Item No. R640 71 160 DN150 EUR 146,00 Galvanized HK cup with hose flanges Item No. R205 15 108 108/100 HK Becher EUR 32,00 Item No. R205 15 133 133/125 HK Becher EUR 45,00 Item No. R205 15 159 159/150 HK Becher EUR 51,00 Item No. R205 15 194 194/200 HK Becher EUR 100,00 Galvanized HK Clutch with hose flanges Item No. R200 15 108 108/100 HK Kupplung EUR 58,00 Item No. R200 15 133 133/125 HK Kupplung EUR 78,00 Item No. R200 15 159 159/150 HK Kupplung EUR 94,00 Item No. R200 15 194 194/200 HK Kupplung EUR 148,00 Galvanized SK-F Clutch with hose flanges Item No. R201 15 108 108/100 SK-F Kupplung EUR 60,00 Item No. R201 15 133 133/125 SK-F Kupplung EUR 80,00 Item No. R201 15 159 159/150 SK-F Kupplung EUR 96,00 Galvanized SK-M with hose flanges Item No. R202 15 108 108/100 SK-M Kupplung EUR 34,00 Item No. R202 15 133 133/125 SK-M Kupplung EUR 48,00 Item No. R202 15 159 159/150 SK-M Kupplung EUR 53,00 Supply in accordance with our Terms of Sale and Delivery. With reservation against materials price increase and misprint.. Page 13
RIA VALVES RIA PENSTOCKS Folder on request RIA VALVES Folder on request Page 14
TERMS OF SALE AND DELIVERY Below mentioned general terms of sale and delivery shall apply to all deliveries and orders, unless otherwise agreed in writing between the parties. 1. Consulting and quotations: Proagria consults purchaser within own field of experience and according to best knowledge on time of consulting, but make reservation to the fact that later acquired knowledge can result in other solutions. 1. Consulting is based solely on the information/details given to Proagria by purchaser. 2. Orders: Proagria s work includes only the, in the order confirmation specified, parts. Any drawings, illustrations as well as technical data in catalogues etc. are only intended as guides and Proagria shall not be liable for any errors or misunderstandings in this material. Is Proagria s order confirmation not consistent with purchasers order, purchaser shall immediately complain. Otherwise purchaser will be bound by the contents of the confirmation. 3. Prices: Prices in quotations, order confirmations and contracts are current prices, unless the order is included in a binding quotation, exclusive of Value Added Tax and any other tax or duty and mounting/assembly. Proagria reserve the right to alter prices in case of considerable alterations in costs of production, wages, raw materials, subsidiary contractors as well as rates of exchange. 4. Delivery: Delivery dates are stated in written order confirmations, and when the goods have arrived on delivery address. Terms of delivery are ex works according to Incoterms 90, unless otherwise agreed in writing. Delivery is considered made, when purchaser is in possession of the goods or the goods are put in charge of first carrier. The ordered goods are delivered and unloaded on a beforehand agreed place, that is passable and accessible for carriage. 5. Terms of payment: Payment must be made according to current terms or 14 days net from date of invoice. Purchaser is not entitled to set-off any counterclaim that is not acknowledged by Proagria. Returning of ordered goods takes place only when pre-agreed and within 1 month. 80% of invoiced value will be credited. Custom-made goods are not accepted returned. Proagria reserves ownership of the goods, until full amount including interest has been paid possibly by bills or other documents. Purchaser is under obligation to keep the goods insured against fire for the full value. Provided that payment has not been made on time of fire, insurance sum will go directly to Proagria. 6. Complaints: Complaints about defects and damages concerning a delivery must be made immediately, and without needless delay after defect is established and at the latest 5 days after receipt of delivery. Returning of goods is only accepted when pre-agreed in writing. Purchaser must not approve consignment notes or similar notes by receipt of damaged goods, if so it is at purchasers own risk, as receipt is then accepted. Proagria s liability for defective delivered goods is limited to replacement of or compensation for the defective parts. Compensation can not exceed purchase price of defective parts. Proagria is not liable for loss of profits or loss of time and will not compensate for other direct or indirect losses. 7. Product liability: Proagria is only liable for damages, provided that it is established, that the damage is caused by errors and neglect by Proagria. Proagria has in Denmark taken out a policy for product liability, for respectively person and object damages, and can not in a single case be meet by a claim for compensation, which exceeds the amount in the policy. Provided that Proagria should be imposed with product liability against a third party for direct or indirect losses, which he has suffered at damaging occurrences, it is purchasers duty to, let himself sue at the court, which tries the claim for compensation made by the third party against Proagria on grounds of the damage, which the third party claims is caused by the delivery. 8. Force Majeure: Following circumstances results in exemption of responsibility, when they occur after entering into the contract and prevents its fulfilment. Work stoppage, strikes, lock out and any other circumstance, which Proagria not reasonably could have foreseen, e.g. fire, engine trouble, exchange restrictions, shortage of transportation as well as failing delivery from Proagria s main- and/or subcontractors. Loss of profit, loss of time and other indirect losses of profit will not be compensated for. 9. Drawings and specifications: All information on weight, dimensions, capacity, price, technical and other data given in catalogues, brochures, circulars, advertisements, illustrations and price lists are approximate and only binding as far as there is explicitly refereed to them. All forwarded drawings and specifications remains Proagria s property and must not without permission be copied, reproduced, handed over to or in any other way be brought to a third parties knowledge. Title concerning drawings and specifications, which Proagria finds necessary to enable purchaser to mount, start, run and maintain the delivery, passes on to purchaser. Proagria can though demand, that they be keep confidential. 10. Venue: Any disagreements in consequence of present terms of sale and delivery as well as interpretation of these must be settled according to Danish law, including customs and trade practice.