LM Guide Ultra-heavy-load, High-rigidity LM Guide Models NR and NRS Structure and Features Improved damping capacity Highly rational LM Guide

Similar documents
Caged Ball LM Guide Global Standard Type LM Guide Model SHS Structure and Features 4-way equal load Self-adjustment capability Global standard size

1.1. Types of Lubricants Grease Lubrication Oil Lubrication

Miniature Type LM Guide Models RSR/RSR-W Structure and Features Ultra compact Capable of receiving loads in all directions

Options for the LM Guide

Contamination Protection Accessories

SRW NEW. Wide Type Roller Guide with Caged Technology

SHS. Caged Ball LM Guide. Ball Cage Effect Global Standard Size. BERG AB Тел. (495) , ф.

Roller. Roller. Caged Roller LM Guide. Roller Cage Effect Ultra-super-high Rigidity SRG/SRN. CATALOG No.270-7E

Caged Ball LM Guide. Ball Cage Effect Wide, Low Center of Gravity Type SHW. CATALOG No.248-5E

Caged Ball LM Guide SPR / SPS

Roller Compliant with New Accuracy Standards Caged Roller LM Guide Roller Cage Effect Ultra-super-high SRG/SRN Rigidity

SRG. CATALOG No.270-4E

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

Caged Roller LM Guide

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

NR/NRS. LM Guide B-93. A Technical Descriptions of the Products (Separate) B Product Specifications

511E. LM Guide General Catalog

SNR/SNS. Advantages of Caged Ball Technology. Revised basic dynamic load ratings

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use

LM Guide Structural Member Rail Four-way Equal Load Type

Wide Caged-roller LM Guide

BERG AB Тел. (495) , ф. (495)

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

Ballscrews / Linear Guideway General Catalog

LM Guide Radial Type Model SR

12.3 Full Roller Type, MSR Series

Introduction of Each Series

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at CATALOG No.

Linear Guideway. Forniture per l Industria Gelmini S.r.l.

SOLDER SHORT SOLDER SCREW

Series 83. Stainless Steel Mini Cylinder

NSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use

12.5 Ball Chain Type, SME Series

The Product Range. Technical Data

Parts Catalog MIXER MODEL: SP8-RL

Specification. Model MCQV2 MCQV. Tube I.D. (mm) 32,40 50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range

SRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

NEV ABLE REDUCER CORONET REDUCER FOR SERVO MOTOR

NOVA COMFORT & STELLA COMFORT. Assembly manual. Rev

PRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company

BRAKE WINCHES B1200B B1200G B2500 B2500G B3500 B1500 B1500G B1500

Direct solenoid and solenoid pilot operated valves

and zero rpm. Maximum recommended pressure is 110 psi (7.6 bar). Adjustment for speed is explained under Selection Procedure.

Wire connection products

Connectors. Section Contents

SVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No.

Standard cast iron Motor

Design and Application Details

The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.

BERG AB Тел. (495) , ф. (495) S B L B L Max. [N]

channel bracket 1.50 (38) flat strap shaded area is useable space

TELESCOPIC CYLINDERS ø mm Series RT

Medium Voltage Fuses

Airflex CB Construction Section B

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment

: B3; B5; B14; B34; B35; V1

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment

Screwed Bonnet Needle Valves. Needle Valves

ENGINE MODEL: KC(1077CC) 4Cyl CAR VEHICLE: 3KC(1166CC) 4Cyl 70-81,4KC(1290CC) 4Cyl INCLUDING:

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

AIR CYLINDER Series A25, A26

TECHNICAL CHARACTERISTICS

Precision Linear Pack

FLUID POWER COMPONENTS & SYSTEMS

Field Installation of the Joystick Conversion Kit (DUAL CONTROL){1408, 5057, 5059, 5264, 5705}

PEC FLY OWNER'S MANUAL SERIAL NO.'S. through. Parts Manual. Maintenance Manual Follows page REVISED: Nov. 07,1998.

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

HYDRAULIC HEAVY DUTY

SERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC

TaskMaster Pneumatic Cylinder

Metering Valves Catalog 4170-MV December 2010

Direct solenoid and solenoid pilot operated valves

Features. Specification. Model. Tube I.D. (mm) 40,50,63 80, Medium. Proof pressure. Ambient temperature. Available speed range

Direct solenoid and solenoid pilot operated valves

Air Commander Part No , with air Part No , without air

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

A2P H2P H4P H6P H1P H3P H5P H7P. Outdoor X205A OFF Y1E E1H R6T X5A F8U F7U K14R K2R X28A X6A SEE NOTE 7 HAP X77A X31A X13A X21A P< S1PL P> S1PH

APPLICATION INFORMATION APPLICATION INFORMATION

TECHNICAL SUPPORT MANUAL Fan Coils FSM4X6000AT

Greeting Card Collection

Constricting Type Clutches and Brakes

Linear Thrusters/PneuMoment

Air Cylinders 3MAJ/4MAJ Series

Our Warranty, Your Satisfaction.

Tie rods cylinders to ISO standard

FLENDER Standard Couplings

The Characteristics of PMI Linear Guideways

Bulletin 800MR/800MB Push Buttons

Precise Stable Durability High Rigidity. Meet the Multi-Demand of Accuracy and Efficiency

Direct Operated Proportional DC Valves

(1) High positioning accuracy, high repeatability. (2) Low frictional resistance, high precision maintained for long period

Single Phase AC Induction Electric Motors

Miller JV Series. Medium Duty Hydraulic Cylinders. Up to 1000 PSI Bore Sizes 1" through 8" 18 Mounting Styles. Catalog M September, 2011

Report Addendum. Terry Keller, SDDOT. Noise Study Technical Report I-29 from Tea Interchange to Skunk Creek Sioux Falls, South Dakota

506E. LM Guide Actuator General Catalog

Linear Guideway General Catalog

Transcription:

a-0

a 1 a-1

a-2

a 3 R a-3

C CL=0.8C CT=0.48C C0 C0L=0.1C0 C0T=0.45C0 1.0 2 0.5 1 a-4

UU SS DD ZZ KK SSHH DDHH ZZHH KKHH a 5 15 1 23 24 29 42 42 42 51 a-5

48 0 86 100 126 145 156.5 31 35 40.5 49 5.5 64 0.5 82.5 31 35 40.5 49 5.5 64 0.5 82 10 14 15 1 20 20 30 30 30 26.6 34 36 4 54 64 110 140 4.6 5.5 6 6.5 10 13.5 10.5 15.5 15 13 1 20.5 24 29.5 36.2 34.2 39.5 40 18 20 26 28 34 M3 5R M4 8R M4 8R M5 10R M5 10R M6 12R M6 12R M6 12R M8 R M4 4R M4 4R M5 4R M5 4R M5 4R M6 5R M6 5R M6 5R M6 5R 11 1.5 15 1.5 15 2 1 2 20 2 22 3.2 3.2 39.5 3.2 30 3.2 NR/NRS X 9 NR/NRS 30 10 NR/NRS 35 10 NR/NRS 45 13 NR/NRS 55 13 NR/NRS 65 20 NR/NRS 5 20 NR/NRS 85 20 NR/NRS 100 JN-/420 z x z x a-6

C 5 M 5 9.8 2.4 C 6 M 6 11.4 2. C 8 M 8 14.4 3. C12 M12 20.5 4. C14 M14 23.5 5. C M 26.5 5. C22 M22 35.5 5. a a-

QZUU QZSS QZDD QZZZ QZKK QZSSHH QZDDHH QZZZHH QZKKHH a-8

a 9 R R R R 56 66 81 94 119 14 29 33 38 45.5 55.5 68.5 29 35 48 56 6 92 14.5 1 20 22 26.3 34 46 54 6 6 92 114 14.5.5 20.5.5 32 5 6 11.5 15.5 5.3 5.3.8.8.8.8 3.5 4.5 6.6 6.6 9 9 0.03 4 0.06 4 a-9

26 31 38 49 5 69.4 81. 91.4 106.4 14 14 18 20 22 28 22 31 32.5 41 46.5 59 56 68 3 1.5 1.5 2 2 2 3.2 3.2 3.2 3.2 a-2

230 20 350 390 40 510 590 630 10 50 830 950 990 100 1110 1190 1230 1310 1350 1430 140 1550 1590 110 1830 1950 200 2190 2310 2430 240 2 3 440 520 0 6 840 920 1000 10 10 1240 1320 1400 14 15 40 120 10 18 19 2040 2 23 20 26 2840 3000 2 3 440 520 0 6 840 920 1000 10 10 1240 1320 1400 14 15 40 120 10 18 19 2040 2 23 20 26 2840 3000 50 65 885 990 1095 1 1305 1410 1515 20 1 1830 1935 2040 2145 20 2355 24 65 260 25 28 2985 900 1020 1140 12 13 0 20 140 18 19 2100 2220 2340 24 200 2820 2940 120 150 2020 2620 12 15 2030 2630 1530 1890 20 2610 1340 1 21 20 a 261 40 120 1 210 15 20 20 22.5 30 35 40 45 40 3000 3000 3000 3000 3000 3000 3000 3000 3000 a-261

a 263 a-262 31 38 44 52 63 5 83 90 50 0 86 100 126 145 156 R 82.8 102 98 120.5 109.5 135 139 11 2.8 185.6 245.6 218 24 246. 302.8 288.8 328.8 32 40 50 65 6 95 100 130 35 50 40 50 2 5 95 0 110 130 140 M6 8 M8 10 M8 12 M10 1 M12 18 M 20 M18 M18 M18 2 62.4 81.6 0.9 93.4.9 103.4 13 123.6 0.8 143.6 203.6 10.2 226.2 194.9 1 223.4 263.4 R R 9..5 9. 31 11. 35 1.5 49 21.5.3 68 2.3 3 34.3 85 8 14. 40.5 10 11 18 20 23 NR35 LR 2 QZ KKHH C0 +1240L P Z- 8 8 10 15 1 20 23 12 12 12 10 4 5 6 8 9 9 10 12 3.9 3.9 5.2 5.2 5.2 8.2 8.2 8.2 8.2 z x c v b n m,. 0 z x c v b n m,. 0 B-PT1/4 28 34 45 53 63 5 85 100 12.5 18 20.5 23.5 31.5 35 35.5 50 1 21 24.5 29 36.5 43 44 48 5 40 120 1 210 6 9.5 8.5 11 9 9 14 12 14 20 1 23 20 18 26 22 22 32 26 24 35 28 26 39 32 33 44 48. 64.9 63.1 85. 96 126 131 10 189 2 21 355 336 435 49 599 84.6 113 122 2 155 210 231 303 310 402 436 0 610 0 51 92 1040 1300 Standard Length and Maximum Length of the LM Rail Selecting a Model Number Refer to the " General Catalog - Technical Descriptions of the Products," provided separately g g 0.1 3.86 0.469 2.33 0.91 0.43 1.26 6.29 0.5 3.82 1.21 0.55 3.1 1.26 6.63 0.8 4.05 1.4 0.4 2.18 10.6 1.33 6.4 1.95 1 4.3 1.5 9.4 1.08 5.8 2.24 1.1 3.14 15.5 1.92 9.43 3.03 1.4 6.2 3.3 1. 2.0 10.8 4.45 2 5.93 28 3.59.9 5.82 2.8 9.8 5.39 2.8 3.3.9 6.98 3.3 8.8 43.8 5.41 26.6 9.05 4.3 14.5 8.6 44. 5.39 2.3 11.6 6.8 9.9 10.1 48 15.9 8. 20.3 14.4 3.3 8.91 44. 19.3 8..4 118 15.4 1.4.2 11.6 24.6 20.3 102 12.4 62.6 26.8 12.3 34. 0 21 96.2 34.6 15.8 30.5 34 20. 101 43.4 21.8 4.3 238 29.2 146 54.6 26.1 42.6 a-263

a 265 31 38 44 52 63 5 83 90 50 0 86 100 126 145 156 R 82.8 102 98 120.5 109.5 135 139 11 2.8 185.6 245.6 218 24 246. 302.8 288.8 328.8 32 40 50 65 6 95 100 130 35 50 40 50 2 5 95 0 110 130 140 M6 8 M8 10 M8 12 M10 1 M12 18 M 20 M18 M18 M18 2 62.4 81.6 0.9 93.4.9 103.4 13 123.6 0.8 143.6 203.6 10.2 226.2 194.9 1 223.4 263.4 R 9..5 9. 31 11. 35 1.5 49 21.5.3 68 2.3 3 34.3 85 8 14. 40.5 10 11 18 20 23 NRS45 LR 2 QZ ZZHH C0 +1L P Z- 8 8 10 15 1 20 23 12 12 12 10 4 5 6 8 9 9 10 12 3.9 3.9 5.2 5.2 5.2 8.2 8.2 8.2 8.2 z x c v b n m,. 0 z x c v b n m,. 0 B-PT1/4 a-264 Standard Length and Maximum Length of the LM Rail Selecting a Model Number Refer to the " General Catalog - Technical Descriptions of the Products," provided separately 28 34 45 53 63 5 85 100 12.5 18 20.5 23.5 31.5 35 35.5 50 1 21 24.5 29 36.5 43 44 48 5 40 120 1 210 6 9.5 8.5 11 9 9 14 12 14 20 1 23 20 18 26 22 22 32 26 24 35 28 26 39 32 R.9 34.5 38.2 51 49.5 6.2 5.3 98.8 103 133 148 204 212 28 264 342 36 40 59.8 9. 86.1 115 109 148 3 214 220 284 309 4 431 566 531 68 3 920 g g 0.568 2.84 0.568 2.84 0.633 0.43 0.926 4.6 0.926 4.6 0.846 0.55 3.1 0.926 4.86 0.926 4.86 1.02 0.4 1.6.83 1.6.83 1.36 1 4.3 1.28 6.92 1.28 6.92 1.54 1.1 2.29 11.3 2.29 11.3 2.09 1.4 6.2 2.4 13 2.4 13 3.09 2 4.34 20.5 4.34 20.5 4.06 2.8 9.8 3.9 20.5 3.9 20.5 4.86 3.3 6.49 32 6.49 32 6.28 4.3 14.5 6.45 32.9 6.45 32.9 8.11 6 12.3 58.6 12.3 58.6 11.1 8. 20.3 10.6 53.8 10.6 53.8 13.4 8. 18.6 8 18.6 8 1.6 11.6 24.6 14.9 5.3 14.9 5.3 18. 12.3.4 11.4 11 24.2 15.8 30.5.1 123.1 123 30.4 21.8 34.6 14 34.6 14 38.1 26.1 42.6 a-265

a 26 a-266 R 82.8 62.4 31 2 59 45 M8 14.8 102 81.6.5 12 4 3.9 98 0.9 38 90 2 52 M10 18.8 120.5 93.4 18 31 12 5 3.9 109.5.9 44 100 82 62 M10 20 18.8 135 103.4 20 35 8 8 12 6 5.2 139 52 120 100 M12 22 11 13 20.5 22 40.5 10 8 5.2 2.8 123.6 63 140 1 95 M14 24 22.5 0.8 24 49 11 10 8 5.2 185.6 143.6 5 10 142 110 M 28 26 245.6 203.6 28 15 9 8.2 218 10.2 83 195 5 130 M18 30 28 24 226.2 30 68 18 1 9 8.2 246. 194.9 90 215 185 140 M20 34 32 302.8 1 34 3 20 20 10 8.2 288.8 223.4 2 220 M20 38 35 328.8 263.4 38 85 23 23 10 12 8.2 B-PT1/4 NR35 A 2 QZ KKHH C0 +1400L P Z- z x c v b n m,. 0 z x c v b n m,. 0 Standard Length and Maximum Length of the LM Rail Selecting a Model Number Refer to the " General Catalog - Technical Descriptions of the Products," provided separately 28 34 45 53 63 5 85 100 23.5 31 33 3.5 43.5 53.5 65 1 21 24.5 29 36.5 43 44 48 5 40 120 1 210 6 9.5 8.5 11 9 9 14 12 14 20 1 23 20 18 26 22 22 32 26 24 35 28 26 39 32 33 44 48. 64.9 63.1 85. 96 126 131 10 189 2 21 355 336 435 49 599 84.6 113 122 2 155 210 231 303 310 402 436 0 610 0 51 92 1040 1300 g g 0.1 3.86 0.469 2.33 0.91 0.58 1.26 6.29 0.5 3.82 1.21 0. 3.1 1.26 6.63 0.8 4.05 1.4 1.1 2.18 10.6 1.33 6.4 1.95 1.4 4.3 1.5 9.4 1.08 5.8 2.24 1.5 3.14 15.5 1.92 9.43 3.03 1.9 6.2 3.3 1. 2.0 10.8 4.45 2. 5.93 28 3.59.9 5.82 3.5 9.8 5.39 2.8 3.3.9 6.98 4.4 8.8 43.8 5.41 26.6 9.05 5. 14.5 8.6 44. 5.39 2.3 11.6.6.8 9.9 10.1 48 15.9 10.9 20.3 14.4 3.3 8.91 44. 19.3 11.3.4 118 15.4 1.4.2 15 24.6 20.3 102 12.4 62.6 26.8.2 34. 0 21 96.2 34.6 20. 30.5 34 20. 101 43.4 26. 4.3 238 29.2 146 54.6 31.2 42.6 a-26

a 269 R 82.8 62.4 31 2 59 45 M8 14.8 102 81.6.5 12 4 3.9 98 0.9 38 90 2 52 M10 18.8 120.5 93.4 18 31 12 5 3.9 109.5.9 44 100 82 62 M10 20 18.8 135 103.4 20 35 8 8 12 6 5.2 139 52 120 100 M12 22 11 13 20.5 22 40.5 10 8 5.2 2.8 123.6 63 140 1 95 M14 24 22.5 0.8 24 49 11 10 8 5.2 185.6 143.6 5 10 142 110 M 28 26 245.6 203.6 28 15 9 8.2 218 10.2 83 195 5 130 M18 30 28 24 226.2 30 68 18 1 9 8.2 246. 194.9 90 215 185 140 M20 34 32 302.8 1 34 3 20 20 10 8.2 288.8 223.4 2 220 M20 38 35 328.8 263.4 38 85 23 23 10 12 8.2 B-PT1/4 a-268 NRS45 LA 2 QZ SSHH C0 +2040L P Z- z x c v b n m,. 0 z x c v b n m,. 0 28 34 45 53 63 5 85 100 23.5 31 33 3.5 43.5 53.5 65 1 21 24.5 29 36.5 43 44 48 5 40 120 1 210 6 9.5 8.5 11 9 9 14 12 14 20 1 23 20 18 26 22 22 32 26 24 35 28 26 39 32.9 34.5 38.2 51 49.5 6.2 5.3 98.8 103 133 148 204 212 28 264 342 36 40 59.8 9. 86.1 115 109 148 3 214 220 284 309 4 431 566 531 68 3 920 Standard Length and Maximum Length of the LM Rail Selecting a Model Number Refer to the " General Catalog - Technical Descriptions of the Products," provided separately g g 0.568 2.84 0.568 2.84 0.633 0.58 0.926 4.6 0.926 4.6 0.846 0. 3.1 0.926 4.86 0.926 4.86 1.02 1.1 1.6.83 1.6.83 1.36 1.4 4.3 1.28 6.92 1.28 6.92 1.54 1.5 2.29 11.3 2.29 11.3 2.09 1.9 6.2 2.4 13 2.4 13 3.09 2. 4.34 20.5 4.34 20.5 4.06 3.5 9.8 3.9 20.5 3.9 20.5 4.86 4.4 6.49 32 6.49 32 6.28 5. 14.5 6.45 32.9 6.45 32.9 8.11.6 12.3 58.6 12.3 58.6 11.1 10.9 20.3 10.6 53.8 10.6 53.8 13.4 11.3 18.6 8 18.6 8 1.6 15 24.6 14.9 5.3 14.9 5.3 18..2.4 11.4 11 24.2 20. 30.5.1 123.1 123 30.4 26. 34.6 14 34.6 14 38.1 31.2 42.6 a-269

a 21 a-20 82.8 62.4 31 2 59 45 102 81.6 14.8 12.5 12 4 3.9 98 0.9 38 90 2 52 9 120.5 93.4 18.8 14 31 12 5 3.9 109.5.9 44 100 82 62 9 135 103.4 20 18.8 35 8 8 12 6 5.2 139 52 120 100 11 11 13 22 20.5 20 40.5 10 8 5.2 2.8 123.6 63 140 1 95 14 0.8 24 22.5 22 49 11 10 8 5.2 185.6 143.6 5 10 142 110 245.6 203.6 28 26 15 9 8.2 218 10.2 83 195 5 130 18 24 226.2 30 28 26 68 18 1 9 8.2 246. 194.9 90 215 185 140 18 302.8 1 34 32 28 3 20 20 10 8.2 288.8 223.4 2 220 20 328.8 263.4 38 35 32 85 23 23 10 12 8.2 NR35 B 2 QZ DDHH C0 +10L P Z- z x c v b n m,. 0 z x c v b n m,. 0 B-PT1/4 28 34 45 53 63 5 85 100 23.5 31 33 3.5 43.5 53.5 65 1 21 24.5 29 36.5 43 44 48 5 40 120 1 210 6 9.5 8.5 11 9 9 14 12 14 20 1 23 20 18 26 22 22 32 26 24 35 28 26 39 32 33 44 48. 64.9 63.1 85. 96 126 131 10 189 2 21 355 336 435 49 599 84.6 113 122 2 155 210 231 303 310 402 436 0 610 0 51 92 1040 1300 Standard Length and Maximum Length of the LM Rail Selecting a Model Number Refer to the " General Catalog - Technical Descriptions of the Products," provided separately g g 0.1 3.86 0.469 2.33 0.91 0.58 1.26 6.29 0.5 3.82 1.21 0. 3.1 1.26 6.63 0.8 4.05 1.4 1.1 2.18 10.6 1.33 6.4 1.95 1.4 4.3 1.5 9.4 1.08 5.8 2.24 1.5 3.14 15.5 1.92 9.43 3.03 1.9 6.2 3.3 1. 2.0 10.8 4.45 2. 5.93 28 3.59.9 5.82 3.5 9.8 5.39 2.8 3.3.9 6.98 4.4 8.8 43.8 5.41 26.6 9.05 5. 14.5 8.6 44. 5.39 2.3 11.6.6.8 9.9 10.1 48 15.9 10.9 20.3 14.4 3.3 8.91 44. 19.3 11.3.4 118 15.4 1.4.2 15 24.6 20.3 102 12.4 62.6 26.8.2 34. 0 21 96.2 34.6 20. 30.5 34 20. 101 43.4 26. 4.3 238 29.2 146 54.6 31.2 42.6 a-21

a 23 a-22 82.8 62.4 31 2 59 45 102 81.6 14.8 12.5 12 4 3.9 98 0.9 38 90 2 52 9 120.5 93.4 18.8 14 31 12 5 3.9 109.5.9 44 100 82 62 9 135 103.4 20 18.8 35 8 8 12 6 5.2 139 52 120 100 11 11 13 22 20.5 20 40.5 10 8 5.2 2.8 123.6 63 140 1 95 14 0.8 24 22.5 22 49 11 10 8 5.2 185.6 143.6 5 10 142 110 245.6 203.6 28 26 15 9 8.2 218 10.2 83 195 5 130 18 24 226.2 30 28 26 68 18 1 9 8.2 246. 194.9 90 215 185 140 18 302.8 1 34 32 28 3 20 20 10 8.2 288.8 223.4 2 220 20 328.8 263.4 38 35 32 85 23 23 10 12 8.2 NRS35 B 2 QZ KKHH C0 +2040L P Z- z x c v b n m,. 0 z x c v b n m,. 0 B-PT1/4 28 34 45 53 63 5 85 100 23.5 31 33 3.5 43.5 53.5 65 1 21 24.5 29 36.5 43 44 48 5 40 120 1 210 6 9.5 8.5 11 9 9 14 12 14 20 1 23 20 18 26 22 22 32 26 24 35 28 26 39 32.9 34.5 38.2 51 49.5 6.2 5.3 98.8 103 133 148 204 212 28 264 342 36 40 59.8 9. 86.1 115 109 148 3 214 220 284 309 4 431 566 531 68 3 920 Standard Length and Maximum Length of the LM Rail Selecting a Model Number Refer to the " General Catalog - Technical Descriptions of the Products," provided separately g g 0.568 2.84 0.568 2.84 0.633 0.58 0.926 4.6 0.926 4.6 0.846 0. 3.1 0.926 4.86 0.926 4.86 1.02 1.1 1.6.83 1.6.83 1.36 1.4 4.3 1.28 6.92 1.28 6.92 1.54 1.5 2.29 11.3 2.29 11.3 2.09 1.9 6.2 2.4 13 2.4 13 3.09 2. 4.34 20.5 4.34 20.5 4.06 3.5 9.8 3.9 20.5 3.9 20.5 4.86 4.4 6.49 32 6.49 32 6.28 5. 14.5 6.45 32.9 6.45 32.9 8.11.6 12.3 58.6 12.3 58.6 11.1 10.9 20.3 10.6 53.8 10.6 53.8 13.4 11.3 18.6 8 18.6 8 1.6 15 24.6 14.9 5.3 14.9 5.3 18..2.4 11.4 11 24.2 20. 30.5.1 123.1 123 30.4 26. 34.6 14 34.6 14 38.1 31.2 42.6 a-23

a-24 82.8 102 98 120.5 109.5 135 139 11 2.8 185.6 245.6 218 24 246. 302.8 288.8 328.8 82.8 102 98 120.5 109.5 135 139 11 2.8 185.6 245.6 218 24 246. 302.8 288.8 328.8 90.4 109.6 10 129.5 119. 145.2 149.2 181.2 13 210.2 196.2 6.2 229 285. 313.8 29.8 33.8 89.2 108.4 104.4 126.9 11.1 142.6 14.4 19.4 11.4 208.6 194.2 4.2 226.6 282.6 6.1 312.2 295.6 335.6 96.8 1 113.4 135.9 12.3 152.8 15.6 189.6 181.6 218.8 204.8 264.8 23.6 293.6 26.1 323.2 30.2 34.2 100.1 119.3 119.3 141.8 131.1 156.6 4.4 196.4 188.1 2.3 214.9 24.9 10. 126.9 128.3.8 141.3 6.8 14.6 206.6 198.3 235.5 2.5 285.5 102.5 121. 121. 144.2 133.5 159.6 199.6 191.3 228.5 218.1 28.1 110.1 129.3 130. 153.2 143. 9.2 1.8 209.8 201.5 238. 228. 288..2 124.4 120.4 142.9 142. 8.2 12.2 204.2 204.8 242 22.6 28.6.2 124.4 120.4 142.9 142. 8.2 12.2 204.2 204.8 242 22.6 28.6 112.8 132 129.4 151.9 152.9 18.4 182.4 214.4 215 2.2 238.2 298.2 110.9 130.1 126.1 148.6 149.5 15 19.8 211.8 213.5 0. 236.3 296.3 118.5 13. 135.1 15.6 159. 185.2 190 222 223. 2.9 246.9 306.9 122.5 141. 141. 4.2 4.3 189.8 19.6 229.6 231.3 268.5 8.1 318.1 130.1 149.3. 13.2 14.5 20.8 239.8 241.5 28. 268. 328. 124.9 144.1 144.1 6.6 6. 192.2.8 232.8 234.5 21. 261.3 321.3 132.5 151. 153.1 15.6 16.9 202.4 211 243 244. 281.9 21.9 331.9

8.1 13.4 15.5 23.3 28.6 39.6 a 25 a-25

a-26 PB1021B 4.8 PB1021B 4.5.4 PB1021B PB1021B A-M6F A-M6F A-M6F.4 6.9 15.3 A-M6F A-M6F A-M6F A-PT1/8 A-PT1/8 NRS XA 2 QZ DDHH +1110L P - z x c z x c

a 2 a-2