All-Glass Assemblies and Door Closing Devices Bohle All-Glass Assemblies T +49 229 5568-0 F +49 229 5568-20 www.bohle-group.com
0 l Corner Fittings - Sample Applications The Bohle corner fittings for toughened glass are suitable for all standard types of all-glass assemblies. All necessary glass cutouts and bore holes are uncomplicated and can be completed quickly and easily. Bohle attaches great importance to top quality products which assure a long service life. all floor-type and frame-mounted door closers with flat conical axle outdoor glass assemblies indoor glass assemblies swinging doors and left opening and right opening doors For 0 mm, 2 mm and 2.7 mm toughened glass Useful information Please use a sufficient number of holding clamps BO 524346. Suitable fastening elements - screws, dowels, etc. provided by the customer. Care instructions: Please use suitable cleaners only. Use of door closers: When you select your door closer (BTS), please note the closing force. Please refer to the relevant tables on pages 8 ff. for the necessary specifications. Please see pages 6-7 for applications using wall connecting profiles. 2
Bottom Corner Fitting for Swinging Doors For 0, 2, 2.7 mm toughened glass with insert for flat conical floor spring axle can be used on left or right side maximum door width 00 mm high 2600 mm weight 85 kg Cover BO 524340 satin stainless steel Top Corner Fitting for Swinging Doors For 0, 2, 2.7 mm toughened glass with plastic bushing for pin with 5 mm diameter can be used on left or right side maximum door width 00 mm high 2600 mm weight 85 kg Cover BO 52434 satin stainless steel Top Pivot For top corner fitting BO 52434 pin diameter 5 mm can be used on left or right side Cover BO 524348 satin stainless steel 3
Overpanel Fitting with Pin Bearing For wall mounting as counterbearing for top corner fitting for swinging doors BO 52434 for 0, 2, 2.7 mm toughened glass pin diameter 5 mm, adjustable +/-3 mm can be used on left or right side Cover BO 524344 satin stainless steel Overpanel Fitting with Pin Bearing and Screw-on Plate For wall mounting as counterbearing for top corner fitting for swinging doors BO 52434 for 0, 2, 2.7 mm toughened glass pin diameter 5 mm, adjustable +/-3 mm can be used on left or right side screw-on plate on back side for wall mounting Cover BO 524345 satin stainless steel Angled Overpanel Fitting with Pin Bearing Counterbearing for top corner fitting for swinging doors BO 52434 for 0, 2, 2.7 mm toughened glass pin diameter 5 mm, adjustable +/-3 mm can be used on left or right side Cover BO 524343 satin stainless steel 4
Lock with PC Bore Holes and Floor Bushing With profile cylinder 3/3 mm (exchangeable) for 0, 2, 2.7 mm toughened glass single turn lock can be used on left or right side incl. 3 keys incl. Floor Bushing Cover BO 524342 satin stainless steel Holding Clamp glass-to-wall For 0, 2, 2.7 mm toughened glass with pin and metal dowel Cover BO 524346 satin stainless steel Floor Pivot with Mounting Plate 90 mm x 45 mm x 3 mm BO 524347 5
02 l Wall Connecting Profiles - Sample Applications Important information Please use all clamping parts. Suitable fastening elements - screws, dowels, etc. provided by the customer. Care instructions: Please use suitable cleaners only. Use of door closers: When you select your door closer (BTS), please note the closing force. Please refer to the relevant tables on pages 8 ff. for the necessary specifications. 6
Wall connecting profile Bohle wall connecting profile for fixed glazings can be used to completely frame the glass of all-glass constructions that are wall / ceiling mounted. In this case the glass does not have to be machined. BO 52 42 90 BO 52 42 9-94 Base profile Base profile for wall connecting system for 8, 0, 2 and 2.7 mm glass thickness Length 3000 mm BO 524290 Clip-on cover profile Two are needed for each base profile (one front and one back) Length 3000 mm Description BO 524295 brushed aluminum anodized Clamping parts 60 mm long with screw and gasket 0 pieces are needed for 3000 mm Description BO 52429 BO 524292 BO 524293 BO 524294 for 8 mm fixed glazing for 0 mm fixed glazing for 2 mm fixed glazing for 2,7 mm fixed glazing 7
03 l Door Closing Devices Floor Springs for Swinging Doors The floor springs BO 52400, BO 524320-2 and BO 524323-27, specially for use with swinging doors, feature an especially flat design. Choice of 90 or 05 locking position. Thanks to the variety of models available, this floor spring is ideal for virtually all applications. Excellent value for money Trouble-free installation thanks to especially flat design Minimal floor recess required Sturdy construction for doors weighing up to 20 kg High mechanical efficiency for comfortable door use with relatively little effort Standard 0 mm plug-in flat conical floor spring axle included Plug-in flat conical floor spring axle not exchangeable incl. cement case 40 mm high and satin stainless steel cover plate Specifications BO 524320 BO 52432 BO 52400 BO 524323 Closing force EN EN2 EN3 EN4 Max. door width 600 mm 800 mm 000 mm 200 mm Max. door weight 60 kg 80 kg 00 kg 20 kg Max. door opening angle 30 Stop position 90 Closing speed continuously adjustable via valve adjustment section : 90-5 adjustment section 2: 5-0 Temperature range -20 C - 45 C glass, wooden and aluminium doors swinging doors as well as left-opening or right-opening doors (single-side opening) Weight 5 kg 5, kg 5,2 kg 5,3 kg 305 mm long Dimensions 08 mm wide 40,5 mm high Tested to 500,000 closings x x x x Specifications BO 524324 BO 524325 BO 524326 BO 524327 Closing force EN EN2 EN3 EN4 Max. door width 600 mm 800 mm 000 mm 200 mm Max. door weight 60 kg 80 kg 00 kg 20 kg Max. door opening angle 30 Stop position 05 Closing speed continuously adjustable via valve adjustment section : 90-5 adjustment section 2: 5-0 Temperature range -20 C - 45 C glass, wooden and aluminium doors swinging doors as well as left-opening or right-opening doors (single-side opening) Weight 5 kg 5, kg 5,2 kg 5,3 kg 305 mm long Dimensions 08 mm wide 40,5 mm high Tested to 500,000 closings x x x x 8
Installation Fastening screws Screws (for height adjustment) Centering of door Sweep speed (section, 90-5 ) Latch speed (section 2, 5-0 ) Adjustment screw Adjustment screw 2 Screws Positioning of door and adjustment of closing speed. Adjust screws 2 and 4 to keep the centre of the ground pivot in axial line with the centre of the top pivot. 2. Adjust screws to stop the door at the intended position in line with the overpanel or frame. 3. Adjust screws 3 to align door parallel to the ground. 4. Turning the valves (screws + 2 below) clockwise decreases closing speed; turning the valves anti-clockwise increases the closing speed in the respective adjustment section. Centering of door : Adjustment screw for section : for adjusting sweep speed (range 90-5 ) 2: Adjustment screw for section 2: for adjusting latch speed (range 5-0 ) Note: A: Mount to suitable door consider load capacity. B: To avoid damage, do not open door beyond 30. C: Only adjust regulating screws and 2 slightly. Turning them completely can cause oil leakage, in which case the floor spring has to be replaced. 9
Universal Floor Springs The Bohle floor springs BO 524330 and BO 52433 can be used universally on standard, narrow or wide doors, left or right opening, or swinging doors. A wide range of accessories allows them to adapt to diverse door constructions and flooring materials. Reduced inventory thanks to separate, exchangeable plug-in flat conical floor spring axles Lean product range offers all essential functions Universal use of floor springs on left-opening, right-opening and swinging doors Easily adaptable to constructional circumstances - even retroactively - thanks to exchangeable plug-in flat conical floor spring axles doors weighting up to 50 kg Standard 0 mm plug-in flat conical floor spring axle included incl. cement case 40 mm high and satin stainless steel cover plate Specifications BO 524330 BO 52433 Closing force EN - EN4 (8 Nm - 32 Nm) Max. door width 200 mm Max. door weight 50 kg Max. door opening angle 80 Stop position 90 (Choice of stop position 40 up to 80 ) 05 (Choice of stop position 40 up to 80 ) Closing speed continuously adjustable via valve Temperature range Weight Dimensions Tested to 500,000 closings adjustment section : 90-5 adjustment section 2: 5-0 -20 C - 45 C glass, wooden and aluminium doors swinging doors as well as left-opening or right-opening doors (single-side opening) 4,55 kg 285 mm long 82 mm wide 49,5 mm high x Installation 0
Sweep speed (section = 90 to 5 ) Latch speed (section 2 = 5 to 0 ) Note: A: Mount to suitable door consider load capacity. B: The total time for the door to close from 90 to 0 should be 4-6 seconds. Make sure the speed difference between section and section 2 is not too big; otherwise the door will not close entirely by itself. C: Only adjust regulating screws and 2 slightly. Turning them completely can cause oil leakage, in which case the floor spring has to be replaced. Plug-in flat conical floor spring axle floor spring axle for bigger gap under the door exchangeable to standard floor spring axle 0 mm gap Height BO 524374 BO 524375 5 mm 20 mm
Universal Floor Springs heavy-duty model The Bohle floor springs BO 524332 and BO 524333 can be used universally on standard, narrow or wide doors, left or right opening, or swinging doors. A wide range of accessories allows them to adapt to diverse door constructions and flooring materials. Lean product range offers all essential functions. Universal use of floor springs on left-opening, right-opening and swinging doors. doors weighting up to 200 kg Standard 0 mm plug-in flat conical floor spring axle included Plug-in flat conical floor spring axle not exchangeable incl. cement case 40 mm high and satin stainless steel cover plate Specifications BO 524332 BO 524333 Closing force EN5 (40 Nm) Max. door width 400 mm Max. door weight 200 kg Max. door opening angle 80 Stop position 90 (Choice of stop position 40 up to 80 ) 05 (Choice of stop position 40 up to 80 ) Closing speed continuously adjustable via valve Temperature range Weight Dimensions Tested to 500,000 closings adjustment section : 90-5 adjustment section 2: 5-0 -20 C - 45 C glass, wooden and aluminium doors swinging doors as well as left-opening or right-opening doors (single-side opening) 4,55 kg 285 mm long 82 mm wide 49,5 mm high x Installation 2
Sweep speed (section = 90 to 5 ) Latch speed (section 2 = 5 to 0 ) Note: A: Mount to suitable door concider load capacity. B: The total time for the door to close from 90 to 0 should be 4-6 seconds. Make sure the speed difference between section and section 2 is not too big; otherwise the door will not close entirely by itself. C: Only adjust regulating screws and 2 slightly. Turning them completely can cause oil leakage, in which case the floor spring has to be replaced. 3
Bohle Transom Door Closers The Bohle transom door closers are installed concealed in the top of the frame of the door and are thus ideal for doors in flexible dividers. swinging as well as single side opening doors, providing, of course, that the frame and door construction are designed accordingly. The Bohle transom door closer is an impressive, top quality swinging door closer and is supplied with special accessories also suitable for single side opening doors. Only one model for all types of mounting swinging doors as well as left-opening and right-opening doors Installation and setting in combination with prefabrication in the workshop No floor recesses required Precise zero positioning of swinging doors easy to adjust Aesthetically pleasing solution Ideal for doors in flexible dividers Opening limitation to prevent the door from hitting the door frame Gentle closing by adjustable closing speeds Specifications BO 52430 BO 5243 BO 52432 BO 52433 Closing force EN EN2 EN3 EN4 Max. door width 600 mm 800 mm 000 mm 200 mm Max. door weight 60 kg 80 kg 00 kg 20 kg Max. door opening angle 30 Stop position 90 Closing speed continuously adjustable via valve adjustment section : 90-5 adjustment section 2: 5-0 Temperature range -20 C - 45 C glass, wooden and aluminium doors swinging doors as well as left-opening or right-opening doors (single-side opening) Weight 4,5 kg 4,6 kg 4,7 kg 4,8 kg 29 mm long Dimensions 92 mm wide 56 mm high Tested to 500,000 closings x x x x Specifications BO 52434 BO 52435 BO 52436 BO 52437 Closing force EN EN2 EN3 EN4 Max. door width 600 mm 800 mm 000 mm 200 mm Max. door weight 60 kg 80 kg 00 kg 20 kg Max. door opening angle 30 Stop position 05 Closing speed continuously adjustable via valve adjustment section : 90-5 adjustment section 2: 5-0 Temperature range -20 C - 45 C glass, wooden and aluminium doors swinging doors as well as left-opening or right-opening doors (single-side opening) Weight 4,5 kg 4,6 kg 4,7 kg 4,8 kg 29 mm long Dimensions 92 mm wide 56 mm high Tested to 500,000 closings x x x x 4
Installation ➀ Sweep range (90-5, or 05-5, depending on model of transom closer) ➁ Latch range (5-0 ) ➂ Max. opening range 30 Speed adjustment ➀ Sweep ➁ Latch ➀ Regulating screw for sweep speed ➁ Regulating screw for latch speed Max. 2 turns in either direction 5
Germany South Africa USA United Kingdom and Ireland Bohle AG Dieselstraße 0 D - 4278 Haan Bohle Glass Equipment (Pty) Ltd. Unit 3, Graphite Industrial Park Fabriek Street, Strijdom Park 225, Gauteng Bohle America, Inc. 0924 Granite Street Suite 200 Charlotte, NC 28273 Bohle Ltd. Fifth Avenue Tameside Park Dukinfield Cheshire SK6 4PP T +49 229 5568-0 F +49 229 5568-20 info@bohle.de T +27 792-6432 F +27 793-5634 info@bohle.co.za T + 704 247 8400 F + 704 247 8420 info@bohle-america.com T +44 6 34200 F +44 6 3440 info@bohle.ltd.uk 200-2868 09_0 EN