SSP TYPE. Toll Free: Fax: Cylindrical Spline Nut. 777 Schwab Road, Suite T, Hatfield, PA part number structure

Similar documents
SSP TYPE. Cylindrical Spline Nut. part number structure B-16. When two spline nuts are used in close contact. major dimensions part number

BALL SPLINE ROTARY BALL SPLINE STROKE BALL SPLINE BALL SCREW SPLINE

SV TYPE SV1/SV2. part number structure example H-8. rollers. number of rollers. stroke diameter. part number 1.5

E-1 SLIDE GUIDE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT SLIDE TABLE GONIO WAY

NSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use

Linear actuators ATL Series

PARALLEL INDEX DRIVES TP Series

FOR EVERY APPLICATION

SM 3 SM 3G SMS 3 SMS 3G

CLAMP AND FLANGE COUPLINGS

The CSF-mini series now includes Ultra Flat models with High-Moment Stiffness

RH Series. Features. Structure. High resolution High resolution of maximum 400,000 pulses/revolution ( /pulse) combining a HarmonicDrive.

RE / /09.97

SWF TYPE. Round Flange Type. part number structure example SWSF 16 G UU. This type is an inch dimension series mainly used in the U.S.

GM (single type) GM-W (double-wide type) GMF-W (round flange double-wide type)

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

LINEAR BEARINGS & HOUSINGS

NEV ABLE REDUCER CORONET REDUCER FOR SERVO MOTOR

Linear actuators ILA Series

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79

10 Thrust ball bearings

Radial Piston Motor (Multi-Stroke) MCR3

The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.

HSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SPH Series GAM CAN, JUST ASK!

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

10 Thrust ball bearings

Performance Plus: Spiral Bevel Series

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories

RIGHT ANGLE DRIVES TG Series

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS

Double-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

Highest Performance: Dyna Series

Precision Modules PSK. The Drive & Control Company

Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14

ANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM

Harmonic Drive CSG-LW High Torque, Lightweight Gear Unit

Highest Precision: Dyna Series

RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

Thomson NEFF Rolled Ball Screws Metric Series

Technical features table. Rod diameter [mm] Protective tube diameter [mm] Motor flange European standard IEC B14

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories

CSG Series Fully Enclosed, Sealed Housing

Linear Axes Technical Data Summary

Precision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327-1E

Bell-house Mounted Arrangement. Highly Flexible K Coupling

HSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD

Precision Modules PSK

SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.

Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13

F-1 SLIDE GUIDE STROKE BALL SPLINE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDE ROTARY BUSH STROKE BUSH SLIDE SHAFT

TE B. Points. Precision Positioning Table TE. Comparison with Precision Positioning Table TU. Major product specifications.

Compact. Fast. Productive. DRL Lift/Swivel Unit

ACTUATORS GENERAL CATALOG

Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA

Precision Modules PSK

CSF-mini Series, Ultra Flat and High Stiffness Type

Electric cylinders CASM

Single direction thrust ball bearings Double direction thrust ball bearings

NSK Ball Screws for High-Load Drive

Bearings for Aircraft and Special Engineering

High Performance: EPR Series

New Product Information Vol.11. Ultra-Flat, Lightweight, Hollow Shaft Gear Unit

Servomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA

TS / CT TS / CT Ⅱ 195 Ⅱ 196

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.

Rotary Actuated Air Gripper

SSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)

Precision ball screws

Linear Drive with Ball Screw Drive Series OSP-E..SB

KFD-HE. Power chucks with through-hole

Cross Roller Guide/Ball Guide General Catalog

Axial-radial cylindrical roller bearings

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

ACTUATORS GENERAL CATALOG

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS

ROBO Cylinder Rotary Straight Motor Model 64mm Width 200V Servo Motor I N T P O. Notes on Selection. Deceleration Rated torque

Profi le rail guides LLR

Precision Linear Pack

Precision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327E

Flexible Couplings BIPEX Series

Profile guide/actuator - RK Compact

HPN Gearhead Series. 5 Sizes. Easy mounting to a wide variety of servomotors

Actuator specifications

NSK Standard Ball Screws High Speed SS Series

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions

Flexible. Light. Productive. LEG Long-stroke Gripper

Linear slide cylinder Double acting single rod type. Bore size: 4.5, 6, 8. Descriptions Bore size mm

DB SERIES Belt Drive Actuators

Automation for a Changing World. Delta Planetary Gearbox PS High Precision Series.

Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs

LM Guide Actuator KR. For details, visit THK at CATALOG No E. Product information is updated regularly on the THK website.

TE B. Points. Precision Positioning Table TE. Comparison with Precision Positioning Table TU. Major product specifications.

Table of contents. Description of couplings 3. Coupling selection 4. Displacements 5. Selection of standard IEC motors 6

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

PRECISION MOTION CONTROL

Highest Precision: Dyna Series

Transcription:

SSP TYPE Cylindrical Spline Nut structure example SSP 8-2 - T1 - - P / CU SSP type nut length blank standard long number of nuts attached to one shaft with special specification accuracy grade blank high P precision spline shaft total length pre-load symbol blank T1 T2 standard light medium When two spline nuts are used in close contact. D m B b m t. 1 d Ds m SSP SSP SSP8 SSP 1 SSP 13A SSP 1A SSP 2 SSP SSP 3 SSP SSP 1 1 2 31 32 37 7 /9 11 13 1 19 1 3 7 8 1 112.2.3 2 2. 2. 3 3 3. 7 1 1 22 1.2 1.2 1.2 2 2. 3. 13 1 17. 2 1 1 2 2 3 3 8 1 13 1.2 23 28 37. 7 12 1 SSP SSP 8 SSP 8 SSP1 SSP1 9 12 1 22 127 1 7 28 1.2 17.2 132. 19. 1 2 27 7 8 7 11 11 1. 8 1 3 3 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE (oil hole) key groove BA SPINE ROTARY BA SPINE (oil hole) key groove SSP spline nut does not come with an oil hole. key groove (oil hole) SSP8811 TOPBA PRODUCTS SIDE BUSH SIDE UNIT basic torque rating CT COT Nm Nm.7 basic load rating C Co kn kn.8 1.22 allowable static moment M1 Nm 1.97 M2 Nm 1.3 second crosssectional moment of inertia 1.1 crosssectional coefficient.9 3 nut kg. mass shaft kg/m.1 SSP STROKE BUSH SIDEROTARYBUSH 2.1. 2. 3.7 8.2 39.2 1.22 1. 2.73 2.7 2.28 2.87.7.89.1 7.. 13.7 11 19.9 1 1.9 1 2.11 2 1.381 3 1.971.71 9.2 2.131 2.19.23..7..38. 1. SSP SSP8 SSP 1 SSP 13A SIDE SHAFT 11.12 11.2 299 2.981 3 3.731 2.1 SSP 1A 83 12 289 37 1 239 12 882 7.8 12.3. 3.8 11.3 1.1 23.2 37. 3 1 38 83 1,7 2,9.1 3 1.271 2.71 8.731.1 2 1.111 3 1.91 3.71 3.2.22.3.81 2. 3.1.8 8. SSP 2 SSP SSP 3 SSP SIDE WAY SIDE TABE GONIO WAY 1,39 3,.1 7.2 9, 2.11 9.1 3 13.1 SSP 2,1 3,8,12,7 8,9,8,23 9,3 11,7 17,3 8. 83.1 11 13 179 127 13 199 298 1,3 2,,1 3,3 7,3 8,8 11,1,1 19,3 37,7.11 1.931.91 1.1.381 9.381 2..1 7. 9.7 13.9 19 39 1 SSP SSP 8 SSP 8 SSP1 SSP1 1kN12kgf1Nm.12kgfm 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW

SSPM TYPE Keyless Spline Nut structure example SSPM 1-2 - T1-2 - P / CU SSPM type number of nuts attached to one shaft pre-load symbol blank standard T1 light with special specification accuracy grade blank high P precision spline shaft total length When two spline nuts are used in close contact. D F W C A d B H K G m SSPM SSPM 8 SSPM1 1 11 /13.2 2.2 2.7 2.7 1.1 1.3 1.3 1. 1.2 1.2 12. 13.. 1 9. 11 13.. 3. 3..8 8. 8. 2.9 3. 3. 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE BA SPINE ROTARY BA SPINE (oil hole) TOPBA PRODUCTS SIDE BUSH SIDE UNIT t 1. basic torque rating Ds CT COT m Nm Nm /12 2. basic load rating C Co kn kn 1.22 2.28 allowable static M1 Nm.1 moment M2 Nm second crosssectionasectional cross- moment of coefficient inertia 9 3 19.7 mass nut shaft kg kg/m.19. part number SSPM STROKE BUSH SIDEROTARYBUSH 1.2 1.2 8 1 1 2.1. 3.7 8.2 1. 2.73 2.87.7 7.. 11 19 1 7..23.38 SSPM 8 92.2.. SSPM1 1kN12kgf1Nm.12kgfm SIDE SHAFT SIDE WAY SIDE TABE GONIO WAY 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW

SSPF TYPE Flange Type Nut structure example SSPF - 2 - T1-3 - P / CU SSPF type number of nuts attached to one shaft pre-load symbol blank standard T1 light T2 medium with special specification accuracy grade blank high P precision spline shaft total length When two spline nuts are used in close contact. D m Df H P.C.D. d1d2h W d SSPF SSPF 8 1 11 3 32 22 2 3..3.3 3..3.3 7. 7. 1 SSPF1 SSPF13A 2 13 3.2 2 3 7 32.8..8. 11 SSPF1A 31 7.8. 2 SSPF2 SSPF 32 37 1 7 1 7 9 7.8..9.. 23 2 2 3 SSPF3 SSPF SSPF 7 19 8 1 112.3 7 9 113 1 1 72 91.11. 98. 1117.11 3 3 3 SSPF 9 /22 127 129 17 1117.11. 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE BA SPINE ROTARY BA SPINE mounting hole x (oil hole) TOPBA PRODUCTS SIDE BUSH SIDE UNIT DS basic torque rating basic load rating CT COT m Nm Nm C Co kn kn allowable static moment M1 M2 Nm Nm second crosssectional moment of inertia crosssectional coefficient 3 mass nut shaft kg kg/m STROKE BUSH SIDEROTARYBUSH /12 2. 1.22 2.28.1 9 19.7.37. SSPF 8 1 13 1 1 2.1. 3.7 8.2 39.2 11 1. 2.73 2.7.12 2.87.7.89 11.2 7.. 13.7 11 19 299 19 1 1,38 2,98 7. 92.2 3 373.2.9.1.2.38. 1 SSPF 8 SSPF1 SSPF13A SSPF1A SIDE SHAFT.2 23 28 37. 7 83 12 289 37 1,39 1 239 12 882 3, 7.8 12.3. 3.8.1 11.3 1.1 23.2 37. 7.2 3 1 38 9 83 1,7 2,9,, 12,7 27, 87,3, 1,11 1,9,7 9,.22.32.1 1.1 2.1 2 3.1.8 8. 13.1 SSPF2 SSPF SSPF3 SSPF SSPF SIDE WAY SIDE TABE GONIO WAY. /3 2,1,8 8. 127 1,3 8,8 1, 1, 3.3 19 SSPF 1kN12kgf1Nm.12kgfm 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW

SSPT TYPE Two Side Cut Flange Type structure example SSPT 1-2 - T1-3 - P / CU SSPT type number of nuts attached to one shaft pre-load symbol blank standard T1 light with special specification accuracy grade blank high P precision spline shaft total length When two spline nuts are used in close contact. D Df B H P.C.D. d1d2h W d m SSPT SSPT 8 SSPT1 1 11 /13.2 3 32 2 22 2 32 3..3.3 3..3.3.8. 7. 7. 1 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE mounting hole x 2 BA SPINE ROTARY BA SPINE (oil hole) TOPBA PRODUCTS SIDE BUSH SIDE UNIT DS basic torque rating basic load rating CT COT m Nm Nm C Co kn kn allowable static moment M1 M2 Nm Nm second crosssectional moment of inertia crosssectional coefficient 3 mass nut shaft kg kg/m STROKE BUSH SIDEROTARYBUSH 8 1 /12 1 2.1. 2. 3.7 8.2 1.22 1. 2.73 2.28 2.87.7.1 7.. 11 9 19 1 19.7.29. SSPT 7..3.38 SSPT 8 92.2.7. SSPT1 1kN12kgf1Nm.12kgfm SIDE SHAFT SIDE WAY SIDE TABE GONIO WAY 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW

SPA TYPE Keyless Block Type structure example SPA 1-2 - T1-2 / CU SPA type number of nuts attached to one shaft pre-load symbol blank standard T1 light with special specification spline shaft total length When two spline nuts are used in close contact. h E W F 1 T B C S D SPA 9 12. 22..2 1 M3 SPA 8 1 28 2 22 2 1 M3 1 SPA1 12. 1. 3 7. 2 M 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE BA SPINE ROTARY BA SPINE NB mark TOPBA PRODUCTS SIDE BUSH SIDE UNIT basic torque rating Ds m /12 CT COT Nm Nm 2. basic load rating C Co kn kn 1.22 2.28 allowable static moment M1 M2 Nm Nm.1 second crosssectionasectional cross- moment of coefficient inertia 9 3 19.7 mass nut shaft kg kg/m.3. part number SPA STROKE BUSH SIDEROTARYBUSH 8 1 1 2.1. 3.7 8.2 1. 2.73 2.87.7 7. 11 19 1 7..2.38 SPA 8 92.2.88. SPA1 1kN12kgf1Nm.12kgfm SIDE SHAFT SIDE WAY SIDE TABE GONIO WAY 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW

SPA-W TYPE Keyless Block Double Type structure example SPA 1 W - 2 - T1-2 / CU SPA type double-wide type number of nuts attached to one shaft with special specification spline shaft total length pre-load symbol blank standard T1 light h E W F 1 T Gw B C S SPA W 9 12..2 3 M3 SPA 8W 1 28 2. 2 3 M3 SPA1W 12. 1. 7. M 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE BA SPINE ROTARY BA SPINE NB mark TOPBA PRODUCTS SIDE BUSH SIDE UNIT D Ds m /12 basic torque rating CT COT Nm Nm 3..8 basic load rating C Co kn kn 1.98. allowable static moment M1 Nm second crosssectional moment of inertia 9 crosssectional coefficient 3 19.7 mass nut shaft kg kg/m.72. part number SPA W STROKE BUSH SIDEROTARYBUSH 1 8 1 1.2 8.8 7. 1. 2.3.2.78 1. 11 19 1 7..8.38 SPA 8W 92.2.179. SPA1W 1kN12kgf1Nm.12kgfm SIDE SHAFT SIDE WAY SIDE TABE GONIO WAY 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW

SSPB TYPE Block Type structure example SSPB - 2 - T1-3 - P / CU SSPB type number of nuts attached to one shaft pre-load symbol blank T1 T2 standard light medium with special specification accuracy grade blank high P precision spline shaft total length When two spline nuts are used in close contact. h B E b T P1 P2 S T1 SSPB2 19 8 2 3 8 3 3 M 12. SSPB 22 7 3 1 M 8 12 SSPB3 2 7 8 3 12 M 8 12 7 SSPB 32 8 1 3 3 1 M1 1 8 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE BA SPINE ROTARY BA SPINE TOPBA PRODUCTS SIDE BUSH SIDE UNIT.2 23 28 37. basic torque rating Ds m / CT COT Nm Nm 83 1 12 239 289 12 37 882 basic load rating C Co kn kn 7.8 11.3 12.3 1.1. 23.2 3.8 37. allowable static moment M1 M2 Nm Nm 3 83 1 1,7 38 2,9 second crosssectionasectional cross- moment of coefficient inertia, 12,7 27, 87,3 3 1,11 1,9,7 nut kg..9 1. 2. mass shaft kg/m 2. 3.1.8 8. part number SSPB2 SSPB SSPB3 SSPB 1kN12kgf1Nm.12kgfm STROKE BUSH SIDEROTARYBUSH SIDE SHAFT SIDE WAY SIDE TABE GONIO WAY 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW

STANDARD SPINE BA structure example SPA 1 W S - 2 - T1 - nut shape SSP cylindrical type SSPM key less type SSPF flange type two side cut SSPT flange type aluminum SPA block type SSPB block type standard length pre-load symbol blank standard T1 light T2 medium number of nuts attached to one shaft standard spline shaft double-wide type heat-treated area heat-treated area Ds d standard length m m 1 1 2 3 12 1 2 3 8 8 1 2 3 1 1 1 2 3 13A 13 2 3 1A 1 2 3 2.2 23 3 28 37. 7. /3 1 / 1 3 2 3 1 3 1 7 1 7 9 1,1 1 8 1,1 1,3 1 8 1,1 1,3 Tolerance for length for sizes -1A: JIS B coarse grade. Refer to dimension tables for nut shape and dimensions. applicable nut SSP SSPM SSPF SSPT SPA SPA W SSPB 8 1,1 yes no 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98

SIDE GUIDE COMMERCIA SPINE BA structure example SSPF C - 2-3 / CU nut shape SSP cylindrical type SSPF flange type SSPB block type with special specification spline shaft total length number of nuts attached to one shaft coercial spline shaft BA SPINE ROTARY BA SPINE TOPBA PRODUCTS SIDE BUSH SIDE UNIT 2 Ds.2 standard length 1, 2, 3,,, SSP SSPM applicable nut SSPF SSPT SPA SPA W SSPB STROKE BUSH SIDEROTARYBUSH 3 23 28 37. 7 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3,,,,,,,,, SIDE SHAFT of total length and length of splined portion yes no total length less than : JIS B coarse grade total length greater than,: +/-. Please specify for s other than those above. Refer to dimensional tables for nut shape and dimensions When a coercial shaft is used, the rated load for the nut is about 7% that indicated in the dimensional tables. SIDE WAY SIDE TABE GONIO WAY 777 Schwab Road, Suite T, Hatfield, PA 19 Toll Free: 8-3-32 Fax: -31-98 ACTUATOR SIDE SCREW