High strength threaded connection Low friction cup sealintegral rod wiper Double wound 302 SS retaining wire 60,000 PSI tensile strength electro-less nickel rod bearing Low friction figure 8 piston seal piston, available Hard chrome plated 100,000 PSI yield strength rod inc plated dust cover Machined bore anodized aluminum housing series Stopper Cylinders SERIES Common Features Nason s series stopper cylinders were designed for today s demanding conveyor systems. ith more power in a smaller package, the series stopper cylinder is offered in seven different mounting styles with three different rod end configurations to fit into almost any design situation. Compact Size Nason s series cylinders were designed with todays conveyor systems in mind. Five bore sizes with a variety of strokes and rod end options ensure a perfect fit for each application. Nason is able to fit a larger bore size into the same package as comparable competitive products. Rugged Construction The series incorporates 60,000 PSI tensile strength bearings with an oversized 100,000 PSI yield strength rod for maimum stopping power. Versatile Design The series stopper cylinders are metric in design (bore & rod size). They are offered in inch or metric mounting and porting. Five different threaded mounting options and two different flange mounting options ensure an eact fit into today s tight space requirements. Due to their 100% machined design they are easily customized by Nason. Rebuildable All series cylinders are field rebuidable.
Series Stopper Cylinders NE product How to Order 75 Engineering Data 76 Bore 77 25mm Bore 80 32mm Bore 83 40mm Bore 86 50mm Bore 89 Rod End Styles 92 Flange Mount 93 TABLE OF CONTENTS
How to Order How to Order Eample: Part Number:-3215FS-EMHS 32 15 FS EM HS BORE STROKE MOUNTING OPTIONS ROD STLE MAGNETIC - Stopper Cylinder BORE 20-25 - 25mm (.98") 32-32mm (1.26") 40-40mm (1.58") 50-50mm (1.97") MOUNTING MF - Threads on Front Face (Rod End) MR - Threads on Rear Face (Opposite Rod) MB - Threads on Both Faces MT - Drilled Through and Counterbored for Bolt Clearance MS - Threads on Side of Cylinder Body FR - Flange on Rear Face (Opposite Rod) FS - Flange on Side of Cylinder Body STROKE Bore 25mm Bore 32mm Bore 40mm Bore 50mm Bore 10 - Stroke 15 - Stroke 10 - Stroke 15 - Stroke 20 - Stroke 10 - Stroke 15 - Stroke 20 - Stroke 20 - Stroke 25-25mm Stroke 30-30mm Stroke 20 - Stroke 25-25mm Stroke 30-30mm Stroke MAGNETIC BLANK (No Code) - Standard "NO MAGNET" Piston M - Piston and Sensor Mounting OPTIONS EM - InchThreads (Mounting and Ports) HS - High Temperature Seals -10 C to 150 C (0 F to 302 F) UR - Urethane Shock Pad Rear (Opposite Rod) ROD STLE BLANK (No Code) - Round Rod F - Flat Rod - Flat Rod with Roller 75
Engineering Data Operating Media: Maimum Operating Pressure: Operating Temperature: Packing: Lubrication: Stroke Tolerance: Air (Clean, Dry or Lubricated) 17 Bar (250 PSI) -10 C to 95 C (0 F to 200 F) Buna N PTFE impregnated grease +1,0mm/-0mm (+0.04"/-0") Unit eights kg (lbs) BORE 20 25 32 40 50 STROKE 10 15 20 25 30 0.15 0.16 (.34) (.36) 0.21 0.23 0.24 (.47) 0.43 (.50) 0.45 (.53) 0.48 (.94) (1.0) (1.06) 0.74 0.79 0.83 (1.67) 1.10 (1.75) 1.15 (1.83) 1.19 (2.43) (2.53) (2.63) Operating Ranges Minimum Operating Pressure for Load 10 (145) eight - kilograms (pounds) 55 (121) 45 (99) 30 (66) 25 (55) 20 (44) 15 (33) 10 (22) 5 (11) 4 (8.8) 3 (6.6) -50-40 -32-25 -20 Pressure - Bar (PSI) 9 (130.5) 8 (116) 7 (101.5) 6 (87) 5 (72.5) 4 (58) 3 (43.5) -20-25 -32-40 -50 2 (4.4) 2 (29) 1 (14.5) 1 (2.2) 1 5 10 15 20 (3.3) (16.5) (33) (49.5) (66) Speed - meters/minute (feet/minute) 0 10 (22) 20 (44) 30 (66) 40 (88) 50 (110) 60 (132) 70 (154) 80 (176) Lateral load - kilograms (pounds) 76
(3/4") Bore Non Front Mount Cylinder "MF" PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) M50,8 #10-32 M50,8 #10-32 30,0 SQ. (1.181") 18,0 (.71") 4,5 (.18") 5,6 (.22") 4,5 (.18") Rear Mount Cylinder "MR" ÿ 20,0 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) TAP 11 (.44") DP Mount Both End Cylinder "MB" Non Thru Mount Cylinder "MT" PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) M50,8 #10-32 4,5 (.18") 30,0 SQ. (1.181") 18,0 (.71") 4,5 (.18") 5,6 (.22") ÿ 20,0 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5 (.18") DP (2 PLACES, OPPOSITE FACE) 20 BORE STROKE ROD STLE MOUNTING OPTIONS 77 10 - STROKE 15 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
(3/4") Bore Front Mount Cylinder "MF" PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) M50,8 #10-32 M50,8 #10-32 30,0 SQ. (1.181") 18,0 (.71") 4,5 (.18") (2 PLACES, 180 APART) 5,6 (.22") 4,5 (.18") Rear Mount Cylinder "MR" 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) ÿ 20,0 TAP 12,7 (.50") DP Mount Both End Cylinder "MB" Thru Mount Cylinder "MT" PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) M50,8 #10-32 4,5 (.18") 30,0 SQ. (1.181") (2 PLACES, 180 APART 18,0 (.71") 4,5 (.18") 5,6 (.22") ÿ 20,0 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5(.18") DP (2 PLACES, OPPOSITE FACE) 20 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS M 78 10 - STROKE 15 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
(3/4") Bore Non Side Mount Cylinder "MS" PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) M50,8 #10-32 M40,7 #8-32 10,0 (.39") 20,0 (.79) 30,0 SQ. (1.181") 18,0 (.71") 4,5 (.18") 5,6 (.22") TAP 6,1 DP. (4 PLACES) 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) ÿ 20,0 Side Mount Cylinder "MS" PUSH 3,14 cm (0.48 in ) PULL 2,32 cm (0.36 in ) M50,8 #10-32 M40,7 #8-32 10,0 (.39") (2 PLACES, 180 APART) 20,0 (.79) 30,0 SQ. (1.181") 18,0 (.71") 4,5 (.18") 5,6 (.22") TAP 6,1 DP. (4 PLACES) 10,0 (ÿ.394) ROD (ROD FLUSH ITH FACE) ÿ 20,0 20 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15 - STROKE MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) 79 BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
25mm (1.0") Bore Non Front Mount Cylinder "MF" PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) M50,8 #10-32 M50,8 #10-32 35,0 SQ. (1.378") 22,0 (.87") 4,75 (.19") 4,75 (.19") 25,4 (1.00") 20,8 (.82") 6,1 Rear Mount Cylinder "MR" 25,4 (1.00") ÿ 24,0 (.95") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) TAP 12,7 (.50") DP Mount Both End Cylinder "MB" Non Thru Mount Cylinder "MT" PUSH 4,91 cm (.76 in ) PULL 3,81 cm (.59 in ) M50,8 #10-32 35,0 SQ. (1.378") 22,0 (.87") 4,75 (.19") 4,75 (.19") 25,4 (1.00") 20,8 (.82") 6,1 25,4 (1.00") ÿ 24,0 (.95") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5 (.18") DP (2 PLACES, OPPOSITE FACE) 25 BORE STROKE ROD STLE MOUNTING OPTIONS 80 10 - STROKE 15 - STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
25mm (1.0") Bore Front Mount Cylinder "MF" PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) M50,8 #10-32 M50,8 #10-32 35,0 SQ. (1.378") 22,0 (.87") 4,75 (.19") 4,75 (.19") 25,4 (1.00") 20,7 (.82") 6,1 Rear Mount Cylinder "MR" 25,4 (1.00") ÿ 24 (.95") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) TAP 12,7 (.50") DP (2 PLACES, 180 APART) Mount Both End Cylinder "MB" Thru Mount Cylinder "MT" PUSH 4,91 cm (.76 in ) PULL 3,81 cm (.59 in ) M50,8 #10-32 35,0 SQ. (1.378") 22,0 (.87") 4,75 (.19") 4,75 (.19") 25,4 (1.00") (2 PLACES, 180 APART) 20,7 (.82") 6,1 25,4 (1.00") ÿ 24,0 (.95") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 4,2 (ÿ.165") DRILL THRU 7,6 (ÿ.30") C'BORE 4,5(.18") DP (2 PLACES, OPPOSITE FACE) 25 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS M 81 10 - STROKE 15 - STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
25mm (1.0") Bore Non Side Mount Cylinder "MS" 10,0 (.39") PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) 20,0 35,0 SQ. (1.378") 22,0 (.87") M50,8 #10-32 M50,8 #10-32 20,8 (.82") 4,75 (.19") 6,1 25,4 (1.00") TAP 7,6 (.30") DP (4 PLACES) ÿ 24,0 (.95") 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) Side Mount Cylinder "MS" 10,0 (.39") PUSH 4,91 cm (0.76 in ) PULL 3,81 cm (0.59 in ) 20,0 35,0 SQ. (1.378") 22,0 (.87") M50,8 #10-32 M50,8 #10-32 20,8 (.82") 4,75 (.19") 6,1 25,5 (1.00") TAP 7,6 (.30") DP (4 PLACES) ÿ 24,0(.95") (2 PLACES, 180 APART) 12,0 (ÿ.472) ROD (ROD FLUSH ITH FACE) 25 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15 - STROKE 20 - STROKE MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) 82 BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
32mm (1-1/4") Bore Non Front Mount Cylinder "MF" PUSH 8,04 cm (1.25 in ) G 1/8 PORT 1/8-27 44,0 (1.73") M61,0 1/4-20 PULL 4,91 cm (0.76 in ) 5,3 (.21") 5,3 (.21") 42,0 SQ. (1.654") 31,5 (1.24") 4,4 (.17") 20,0 25,1 (.99") 8,4 (.33") 7,1 (.28") Rear Mount Cylinder "MR" 31,5 (1.24") ÿ 36,0 (1.42") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) TAP 16,0 (.63") DP Mount Both End Cylinder "MB" Non Thru Mount Cylinder "MT" 44,0 (1.73") PUSH 8,04 cm (1.25 in ) PULL 4,91 cm (0.76 in ) G 1/8 PORT 1/8-27 5,3 (.21") 5,3 (.21") 42,0 SQ. (1.654") 31,5 (1.24") 4,4 (.17") 20,0 25,1 (.99") 8,4 (.33") 7,1 (.28") 31,5 (1.24") ÿ 36,0 (1.42") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 5,2 (ÿ.204") DRILL THRU 8,6 (ÿ.34") C'BORE 5,6 (.22") DP (2 PLACES, OPPOSITE FACE) 32 BORE STROKE ROD STLE MOUNTING OPTIONS 83 10 - STROKE 15 - STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
32mm (1-1/4") Bore Front Mount Cylinder "MF" G 1/8 PORT 1/8-27 PUSH 8,04 cm (1.25 in ) 44,0 (1.73") M61,0 1/4-20 PULL 4,91 cm (0.76 in ) 5,3 (.21") 5,3 (.21") 42,0 SQ. (1.654") 31,5 (1.24") 4,4 (.17") 20,0 25,1 (.99") 8,4 (.33") 7,1 (.28") Rear Mount Cylinder "MR" 31,5 (1.24") ÿ 36,0 (1.42") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) TAP 16,0 (.63") DP Mount Both End Cylinder "MB" (2 PLACES. 180 APART) Thru Mount Cylinder "MT" 44,0 (1.73) PUSH 8,04 cm (1.25 in ) PULL 4,91 cm (0.76 in ) G 1/8 PORT 1/8-27 5,3 (.21") 5,3 (.21") 42,0 (1.654") SQ. 31,5 (1.24") 4,4 (.17") (2 PLACES. 180 APART) 20,0 25,1 (.99") 8,4 (.33") 7,1 (.28") 31,5 (1.24") ÿ 36,0 (1.42") 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) 5,2 (ÿ.204") DRILL THRU 8,6 (ÿ.34") C'BORE 5,6 (.22") DP (2 PLACES, OPPOSITE FACE) 32 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS M 84 10 - STROKE 15 - STROKE 20 - STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
32mm (1-1/4") Bore Non Side Mount Cylinder "MS" 44,0 (1.73") PUSH 8,04 cm (1.25 in ) PULL 4,91 cm (0.76 in ) G 1/8 PORT 1/8-27 M50,8 #10-32 20,0 12,0 (.47") 15,5 (.61") 5,3 (.21") 42,0 SQ. (1.654") 4,4 (.17") 25,1 (.99") 8,4 (.33") 7,1 (.28") 31,5 (1.24") ÿ 36,0 (1.42") TAP 8,0 (.32") DP (4 PLACES) 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) Side Mount Cylinder "MS" 44,0 (1.73") PUSH 8,04 cm (1.25 in ) PULL 4,91 cm (0.76 in ) 20,0 G 1/8 PORT 1/8-27 M50,8 #10-32 12,0 (.47") 15,5 (.61") 5,3 (.21") 42,0 SQ. (1.654") 4,4 (.17") 25,1 (.99") 8,4 (.33") 7,1 (.28") 31,5 (1.24") ÿ 36,0 (1.42") TAP 8,0 (.32") DP (4 PLACES) 32 20,0 (ÿ.787) ROD (ROD FLUSH ITH FACE) (2 PLACES. 180 APART) BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 10 - STROKE 15 - STROKE 20 - STROKE MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) 85 BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
40mm (1-1/2") Bore Non Front Mount Cylinder "MF" PUSH 12,56 cm (1.95 in ) 25mm 47,0 (1.85") 30mm PULL 9,42 cm (1.46 in ) G 1/8 PORT 1/8-27 M61,0 1/4-20 6,0 6,0 50,0 SQ. (1.968") 38,0 (1.50") 3,6 (.14") 26,4 (1.04") 9,9 (.39") Rear Mount Cylinder "MR" 38,0 (1.50") Ø44,0 (1.73") 25.0(Ø.984") ROD (ROD FLUSH ITH FACE) TAP 15,2(.60") DP Mount Both End Cylinder "MB" Non Thru Mount Cylinder "MT" 25mm 30mm 47,0 (1.85") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) G 1/8 PORT 1/8-27 6,0 6,0 50,0 SQ. (1.968") 38,0 (1.50") 3,6 (.14") 26,4 (1.04") 9,9 (.39") 38,0 (1.50") Ø44,0 (1.73") 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) 5,2 (Ø.204") DRILL THRU 8,6 (Ø.34") C'BORE 5,6(.22") DP (2 PLACES, OPPOSITE FACE) 40 BORE STROKE ROD STLE MOUNTING OPTIONS 86 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
40mm (1-1/2") Bore Front Mount Cylinder "MF" 25mm 30mm 47,0 (1.85") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) G 1/8 PORT 1/8-27 M61,0 1/4-20 6,0 6,0 50,0 SQ. (1.968") 38,1 (1.50") 3,6 (.14") 26,4 (1.04") 9,9 (.39") Rear Mount Cylinder "MR" 38,0 (1.50") Ø44,0 (1.73") 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) TAP 15,2 (.60") DP (2 PLACES. 180 APART) Mount Both End Cylinder "MB" Thru Mount Cylinder "MT" 25mm 47,0 (1.85") 30mm 6,0 6,0 50,0 SQ. (1.968") 38,0 (1.50") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) 3,6 (.14") (2 PLACES. 180 APART) G 1/8 PORT 1/8-27 26,4 (1.04") 9,9 (.39") 38,0 (1.50") Ø44,0 (1.73") 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) 5,2 (Ø.204") DRILL THRU 8,6 (Ø.34") C'BORE 5,6 (.22") DP (2 PLACES, OPPOSITE FACE) 40 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS M 87 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
40mm (1-1/2") Bore Non Side Mount Cylinder "MS" 25mm 30mm 47,0 (1.85") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) G 1/8 PORT 1/8-27 M61,0 1/4-20 12,0 (.47") 25,0 (.98") 6,0 50,0 SQ. (1.968") 3,6 (.14") 26,4 (1.04") 9,9 (.39") 38,0 (1.50") Ø44,0 (1.73") TAP 9,7 (.38") DP (4 PLACES) 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) Side Mount Cylinder "MS" 25mm 30mm 47,0 (1.85") PUSH 12,56 cm (1.95 in ) PULL 9,42 cm (1.46 in ) G 1/8 PORT 1/8-27 M61,0 1/4-20 12,0 (.47") 25,0 (.98") 6,0 50,0 SQ. (1.968") 3,6 (.14") 26,4 (1.04") 9,9 (.39") 38,0 (1.50") Ø44,0 (1.73") TAP 9,7 (.38") DP (4 PLACES) 25.0 (Ø.984") ROD (ROD FLUSH ITH FACE) (2 PLACES. 180 APART) 40 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) 88 BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
50mm (2.0") Bore Non Front Mount Cylinder "MF" 25mm 30mm 49,5 (1.95") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) G 1/8 PORT 1/8-27 M81,25 5/16-18 6,5 (.26") 6,5 (.26") 63,0 (2.48") SQ. 50,0 (1.97") 2 (1.06") 10,9 (.43") Rear Mount Cylinder "MR" 50,0 (1.97") ÿ 56,0 (2.21") Mount Both End Cylinder "MB" 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) TAP 20,3 (.80") DP Non Thru Mount Cylinder "MT" 25mm 30mm 49,5 (1.95") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) G 1/8 PORT 1/8-27 6,5 (.26") 63,0 (2.48") SQ. 50,0 (1.97") 2 (1.06") 10,9 (.43") 6,5 (.26") 50,0 (1.97") ÿ 56,0 (2.21") 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 6,8 (ÿ.268") DRILL THRU 10,4 (ÿ.41") C'BORE DP (2 PLACES, OPPOSITE FACE) 50 BORE STROKE ROD STLE MOUNTING OPTIONS 89 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
50mm (2.0") Bore Front Mount Cylinder "MF" 25mm 30mm 49,5 (1.95") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) G 1/8 PORT 1/8-27 M81,25 5/16-18 63,0 SQ. (2.48") 6,5 (.26") 6,5 (.26") 50,0 (1.97") 2 (1.06") 10,9 (.43") Rear Mount Cylinder "MR" 50,0 (1.97") ÿ 56,0 (2.21") 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) TAP 20,3(.80") DP (2 PLACES. 180 APART) Mount Both End Cylinder "MB" Thru Mount Cylinder "MT" 25mm 30mm 49,5 (1.95") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) G 1/8 PORT 1/8-27 63,0 SQ. (2.48") 6,5 (.26") 6,5 (.26") 50,0 (1.97") (2 PLACES. 180 APART) 2 (1.06") 10,9 (.43") 50,0 (1.97") ÿ 56,0 (2.21") 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) 6,8 (ÿ.268") DRILL THRU 10,4 (ÿ.41") C'BORE DP (2 PLACES, OPPOSITE FACE) 50 BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS M 90 20 - STROKE 25-25mm STROKE 30-30mm STROKE BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
50mm (2.0") Bore Non Side Mount Cylinder "MS" 25mm 30mm 49,5 (1.95") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) G 1/8 PORT 1/8-27 M81,25 5/16-18 12,0 (.47") 25,0 (.98") 6,5 (.26") 63,0 SQ. (2.48") 2 (1.06") 10,9 (.43") 50,0 (1.97") ÿ 56,0 (2.21") TAP 12,0 (.47") DP (4 PLACES) 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) Side Mount Cylinder "MS" 25mm 30mm 49,5 (1.95") PUSH 19,63 cm (3.04 in ) PULL 14,72 cm (2.28 in ) G 1/8 PORT 1/8-27 M81,25 5/16-18 12,0 (.47") 25,0 (.98") 6,5 (.26") 63,0 SQ. (2.48") 2 (1.06") 10,9 (.43") 50,0 (1.97") ÿ 56,0 (2.21") TAP 12,0 (.47") DP (4 PLACES) 50 25,0 (ÿ.984) ROD (ROD FLUSH ITH FACE) (2 PLACES. 180 APART) BORE STROKE ROD STLE MOUNTING MAGNETIC OPTIONS 20 - STROKE 25-25mm STROKE 30-30mm STROKE MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62) 91 BLANK (NO CODE) - ROUND ROD (SHON) - FLAT ROD ITH ROLLER (SEE PAGE 92) SENSORS SOLD SEPERATEL SKS, SKP, S, P - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS) BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
Rod End Styles Round Rod - Rod Code Blank (No Code) STROKE (RETRACTS FLUSH) SHON ETENDED DIA. (SHON ETENDED) Flat Rod - Rod Code"F" ORKPIECE TRANSFER DIRECTION STROKE (RETRACTS FLUSH) SHON ETENDED DIA. (SHON ETENDED) Standard orientation for flat is side "". Flat can be reoriented to any position. Flat Rod ith Roller - Rod Code - "" SHON RETRACTED ORKPIECE TRANSFER DIRECTION "E" DIA. "F" DIA. Standard orientation for flat is side "". Flat can be reoriented to any position. Bore "D" "E" "F" 20 25 32 40 50 10,0(0.394") 8,0(0.315") 12,0(0.472") 10,0(0.394") 20,0(0.787") 18,0(0.709") 25,0(0.984") 22,5(0.886") 25,0(0.984") 22,5(0.886") 3,5 (.14") 4,0(.16") 8,0 (.32") 9,0 (.35") 9,0 (.35") 6,35(0.25") 8,5 (0.33") 8,0 (0.32") 8,6(0.34") 17,0(0.67") 20,6(0.81") 20,6(0.81") 11,0 (.43") 19,0 (.75") 25,0 (.98") 25,0 (.98") 10,0 (0.39") 18,0 (0.71") 24,0 (0.95") 24,0 (0.95") 92 - Rod shown etended on Round Rod and Flat Rod Styles - Roller material: Plastic
Rear Face Flange Mount Rear Face Flange Mount - "FR" "G" "H" FLANGE CAN BE ROTATED 90 SEE INDIVIDUAL PRODUCT PAGE FOR CLINDER DIMENSIONS "D" "F" "E" Material: Anodized Aluminum Bore 20 25 32 40 50 "D" "E" "F" "G" "H" 5,4 (.21") 40,0 (1.58") 31,8 (1.25") 15,9 (.63") 50,8 (2.0") 9,5 (.38") 4,5 (.18") 25,4 (1.0") 3,9 (.15") 43,0 (1.69") 38,1 (1.50") 19,05 (.75") 63,5 (2.5") 5,75 (.23") 52,0 (2.05") 31,8 (1.25") 44,5 (1.75") 22,25 (.88") 9,5 (.38") 5,5 (.22") 76,2 (3.0") 8,1 (.32") 60,0 (2.36") 38,1 (1.50") 50,8 (2.00") 25,4 (1.00") 93,0 (3.66") 12,7 (.50") 7,5 (.30") 78,0 (3.07") 8,5 (.33") 46,5 (1.83") 63,5 (2.50") 31,8 (1.25") Side Flange Mount - "FS" "F" "F" SEE INDIVIDUAL PRODUCT PAGE FOR CLINDER DIMENSIONS "G" "G" "D" "J" "H" "E" (4 PLACES) Material: Anodized Aluminum 93 Bore 20 25 50,8 (2.00") 9,5 (.38") 5,4 (.21") "D" 40 (1.58") 3,9 (.15") 43 (1.69") 32 63,5 (2.50") 5,75 (.23") 52 (2.05") 9,5 (.38") 40 76,2 (3.00") 8,1 (.32") 60 (2.36") "E" 4,5 (.18") 5,5 (.22") 50 93 (3.66") 12,7 (.50") 7,5 (.30") 78 (3.07") 8,5 (.33") "F" "G" 19 (.75") 9,5 (.38") 25,4 (1.00") 12,7 (.50") "H" 19.5 (.77") 16,25 (.64") 25,75 (1.01") "J" 25,4 (1.0") 31,8 (1.25") 38,1 (1.50") 46,5 (1.83")
1307 S Highway 11 alhalla 29691 800.229.4955 Phone: 864.638.9521 Fa: 864.638.7903 Orders: 800.229.4955 www.nasonptc.com ARRANT: It is the sole responsibility of the user to determine the suitability of any product or information supplied by Nason for any application or use by the user. THE FOLLOING IS IN LIEU OF ALL OTHER ARRANTIES, EPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILIT AND FITNESS FOR A PARTICULAR PURPOSE. The Nason Company warrants each product to be free from defects in material and workmanship under normal use and service. Nason s obligation under this warranty is limited to repairing of or supplying, at our option, a part or parts to replace any defective part(s) within one (1) year from the date of original sale. ear components including but not limited to seals, wear bands, and bearings are ecluded from this warranty. No product will be returned without prior authorized approval. If authorized, the transportation charges are to be prepaid to The Nason Company, alhalla,. Unauthorized returns will be returned freight collect. The provisions of this warranty will not apply to any part(s) which have been subject to misuse, negligence, or accident, or which have been repaired or altered outside of The Nason Company service department in any way so as in the judgement of Nason to adversely affect its performance, stability, or reliability. The Nason Company neither assumes nor authorizes anyone to assume for it any other obligation or liability for any loss or damage either direct, incidental or consequential resulting from or arising out of or in connection with any of its defective part(s). Nason will not be responsible for any labor or other charges in connection with the removal of a product deemed to be defective or for installation or replacement of a defective or repaired product. Buyer s sole remedies are as provided herein. In no event shall Nason be liable for any cost of Buyer s cover, or for any indirect, special, consequential, incidental, or punitive damages of any sort, whether based on tort or breach of contract and/or warranty. Request Nason s catalog of custom engineered switches by calling toll free 800-229-4955 or visit our website at www.nasonptc.com NAS-CL 6/10