Size 5
WORLD-WIDE CIRCUIT PROTECTION SOLUTIONS ussmann manufacture a wide range of products for the protection of electrical and electronic circuits... Fuse Links, Fuse Holders, and Fusegear, all readily available from manufacturing sites in the United Kingdom, Denmark, United States, razil and Mexico. ussmann is a division of Cooper Industries Inc., a diversified world-wide manufacturer of electrical products and power equipment. ussmann has grown through both organic growth and acquisition. cquisitions have included the fusegear division of LK-NES, eswick which added UK Domestic fuses as well as IEC and UL Electronic fuses, Hawker Fusegear (formally rush Fusegear Ltd.) which strengthened our range of power fuses and Fusegear. ussmann circuit protection solutions comply with major international standards: S, IEC, DIN and UL, CS... Our manufacturing operations have earned ISO 9000 certification, ensuring the utmost quality across every product.
Sept. 00 Typower Zilox 690V ac 000-6300 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 690V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 500 000 550 000 395 170M8050 500 1 000 000 5 100 000 435 170M8051 3000 1 750 000 8 900 000 470 170M805 3500 800 000 14 500 000 505 170M8053 5KN/85 4000 4 50 000 000 000 535 170M8054 170K648-9 4500 6 150 000 31 500 000 565 170M8055 5000 8 550 000 43 500 000 595 170M8056 5500 11 500 000 58 500 000 60 170M8057 6000 15 000 000 76 500 000 645 170M8058 6300 17 500 000 89 000 000 655 170M8059 - Interrupting rating 300k RMS Symmetrical (Estimated) 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 690V 000 600 550 450 400 350 300 50 00 150 500 350 3150 3100 3000 950 850 800 750 700 3000 3950 3800 3700 3600 3500 3450 3350 3300 350 3500 4600 4450 4350 400 4100 4000 3950 3850 3800 4000 550 5100 4950 4800 4700 4600 4500 4400 4350 4500 5900 5750 5550 5400 5300 5150 5050 4950 4900 5000 6550 6350 600 6050 5900 5750 5650 5500 5450 5500 750 7000 6800 6650 6450 6300 600 6100 6000 6000 7900 7650 7450 750 7050 6900 6750 6650 6500 6300 8300 8050 7800 7600 7400 750 7100 6950 6850 690V Double Sided Cooling 000 3300 3150 3000 850 750 600 500 400 300 500 4150 3950 3750 3600 3400 350 3100 3000 900 3000 5000 4750 4500 4300 4100 3900 3750 3600 3450 3500 5800 5550 550 5000 4800 4600 4400 400 4050 4000 6650 6350 6000 5750 5500 550 5000 4800 4650 4500 7500 7100 6800 6450 6150 5900 5650 5400 500 5000 8300 7900 7550 700 6850 6550 650 6000 5800 5500 9150 8700 8300 7900 7550 700 6900 6650 6400 6000 10000 9500 9050 8600 850 7850 7550 750 6950 6300 10500 10000 9500 9050 8650 850 7900 7600 7300 170Q060E 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 690V ac 000-6300 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/85 71,6± 1,5 84,6± 1,5 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on bussmann@bussmann.dk
Sept. 00 Typower Zilox 690V ac 000-6300 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 690V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 500 000 550 000 395 170M8031 500 1 000 000 5 100 000 435 170M803 3000 1 750 000 8 900 000 470 170M8033 3500 800 000 14 500 000 505 170M8034 5SKN/85 4000 4 50 000 000 000 535 170M8035 170K648-9 4500 6 150 000 31 500 000 565 170M8036 5000 8 550 000 43 500 000 595 170M8037 5500 11 500 000 58 500 000 60 170M8038 6000 15 000 000 76 500 000 645 170M8039 6300 17 500 000 89 000 000 655 170M8040 - Interrupting rating 300k RMS Symmetrical (Estimated) 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) 690V Single Sided Cooling 000 600 550 450 400 350 300 50 00 150 500 350 3150 3100 3000 950 850 800 750 700 3000 3950 3800 3700 3600 3500 3450 3350 3300 350 3500 4600 4450 4350 400 4100 4000 3950 3850 3800 4000 550 5100 4950 4800 4700 4600 4500 4400 4350 4500 5900 5750 5550 5400 5300 5150 5050 4950 4900 5000 6550 6350 600 6050 5900 5750 5650 5500 5450 5500 750 7000 6800 6650 6450 6300 600 6100 6000 6000 7900 7650 7450 750 7050 6900 6750 6650 6500 6300 8300 8050 7800 7600 7400 750 7100 6950 6850 690V Double Sided Cooling 000 3300 3150 3000 850 750 600 500 400 300 500 4150 3950 3750 3600 3400 350 3100 3000 900 3000 5000 4750 4500 4300 4100 3900 3750 3600 3450 3500 5800 5550 550 5000 4800 4600 4400 400 4050 4000 6650 6350 6000 5750 5500 550 5000 4800 4650 4500 7500 7100 6800 6450 6150 5900 5650 5400 500 5000 8300 7900 7550 700 6850 6550 650 6000 5800 5500 9150 8700 8300 7900 7550 700 6900 6650 6400 6000 10000 9500 9050 8600 850 7850 7550 750 6950 6300 10500 10000 9500 9050 8650 850 7900 7600 7300 170Q060bE 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 690V ac 000-6300 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/85 75,3± 1,5 81,8 ± 1,5 0` 1 Max. 178 180,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/100 110,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on bussmann@bussmann.dk
Sept. 00 Typower Zilox 900V ac 000-5500 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 900V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 780 000 4 150 000 385 170M8070 500 1 550 000 8 00 000 45 170M8071 3000 700 000 14 500 000 460 170M807 5KN/100 3500 4 350 000 3 500 000 495 170M8073 170K8534-35 4000 6 600 000 35 000 000 55 170M8074 4500 9 500 000 50 500 000 555 170M8075 5000 13 000 000 69 500 000 580 170M8076 5500 17 500 000 93 000 000 610 170M8077 - Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 900V 000 400 350 300 50 50 00 150 150 100 500 3000 950 900 850 800 750 700 650 650 3000 3650 3550 3500 3400 3350 3300 350 300 3150 3500 450 4150 4050 4000 3900 3850 3800 3750 3700 4000 4850 4750 4650 4550 4500 4400 4350 4300 400 4500 5450 5350 550 5150 5050 4950 4900 4800 4750 5000 6050 5950 5800 5700 5600 5500 5450 5350 5300 5500 6650 6550 6400 6300 600 6050 6000 5900 5800 900V Double Sided Cooling 000 850 750 650 550 500 400 350 300 00 500 3550 3450 3300 300 3100 3000 950 850 800 3000 4300 4150 4000 3850 3750 3650 3500 3450 3350 3500 5000 4850 4650 4500 4350 450 4100 4000 3900 4000 5700 5500 5350 5150 5000 4850 4700 4600 4450 4500 6450 600 6000 5800 5600 5450 5300 5150 5050 5000 7150 6900 6650 6450 650 6050 5900 5750 5600 5500 7850 7600 7350 7100 6900 6650 6500 6300 6150 170Q0604E 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 900V ac 000-5500 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/100 87,6± 1,8 100,6± 1,8 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk
Sept. 00 Typower Zilox 900V ac 000-5500 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 900V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 780 000 4 150 000 385 170M8041 500 1 550 000 8 00 000 45 170M804 3000 700 000 14 500 000 460 170M8043 5SKN/100 3500 4 350 000 3 500 000 495 170M8044 170K8534-35 4000 6 600 000 35 000 000 55 170M8045 4500 9 500 000 50 500 000 555 170M8046 5000 13 000 000 69 500 000 580 170M8047 5500 17 500 000 93 000 000 610 170M8048 - Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) 900V Single Sided Cooling 000 400 350 300 50 50 00 150 150 100 500 3000 950 900 850 800 750 700 650 650 3000 3650 3550 3500 3400 3350 3300 350 300 3150 3500 450 4150 4050 4000 3900 3850 3800 3750 3700 4000 4850 4750 4650 4550 4500 4400 4350 4300 400 4500 5450 5350 550 5150 5050 4950 4900 4800 4750 5000 6050 5950 5800 5700 5600 5500 5450 5350 5300 5500 6650 6550 6400 6300 600 6050 6000 5900 5800 900V Double Sided Cooling 000 850 750 650 550 500 400 350 300 00 500 3550 3450 3300 300 3100 3000 950 850 800 3000 4300 4150 4000 3850 3750 3650 3500 3450 3350 3500 5000 4850 4650 4500 4350 450 4100 4000 3900 4000 5700 5500 5350 5150 5000 4850 4700 4600 4450 4500 6450 600 6000 5800 5600 5450 5300 5150 5050 5000 7150 6900 6650 6450 650 6050 5900 5750 5600 5500 7850 7600 7350 7100 6900 6650 6500 6300 6150 170Q0604bE 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 900V ac 000-5500 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/100 91,3 ± 1,8 97,8± 1,8 0` 1 Max. 178 180,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/100 110,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk
Sept. 00 Typower Zilox 1100V ac 000-5000 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1100V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 1 000 000 5 550 000 405 170M801 500 000 000 11 000 000 450 170M8013 3000 3 550 000 19 500 000 485 170M8014 5KN/115 3500 5 750 000 31 000 000 515 170M8015 170K667-73 4000 8 700 000 47 000 000 550 170M8016 4500 1 500 000 67 500 000 580 170M8017 5000 17 000 000 93 000 000 615 170M8018 - Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1100V 000 400 350 300 50 50 00 150 150 100 500 3000 950 900 850 800 750 700 650 650 3000 3650 3550 3500 3400 3350 3300 350 300 3150 3500 450 4150 4050 4000 3900 3850 3800 3750 3700 4000 4850 4750 4650 4550 4500 4400 4350 4300 400 4500 5450 5350 550 5150 5050 4950 4900 4800 4750 5000 6050 5950 5800 5700 5600 5500 5450 5350 5300 1100V Double Sided Cooling 000 850 750 650 550 500 400 350 300 00 500 3550 3450 3300 300 3100 3000 950 850 800 3000 4300 4150 4000 3850 3750 3650 3500 3450 3350 3500 5000 4850 4650 4500 4350 450 4100 4000 3900 4000 5700 5500 5350 5150 5000 4850 4700 4600 4450 4500 6450 600 6000 5800 5600 5450 5300 5150 5050 5000 7150 6900 6650 6450 650 6050 5900 5750 5600 170Q0603E 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 1100V ac 000-5000 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/115 10,6±,0 115,6±,0 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk
Sept. 00 Typower Zilox 1100V ac 000-5000 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1100V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 1 000 000 5 550 000 405 170M8061 500 000 000 11 000 000 450 170M806 3000 3 550 000 19 500 000 485 170M8063 5SKN/115 3500 5 750 000 31 000 000 515 170M8064 170K667-73 4000 8 700 000 47 000 000 550 170M8065 4500 1 500 000 67 500 000 580 170M8066 5000 17 000 000 93 000 000 615 170M8067 - Interrupting rating 300 k RMS Symmetrical (estimated), 197 k tested - Suitable Microswitches: 170H0069, 170H307 (gold) 1100V Single Sided Cooling 000 400 350 300 50 50 00 150 150 100 500 3000 950 900 850 800 750 700 650 650 3000 3650 3550 3500 3400 3350 3300 350 300 3150 3500 450 4150 4050 4000 3900 3850 3800 3750 3700 4000 4850 4750 4650 4550 4500 4400 4350 4300 400 4500 5450 5350 550 5150 5050 4950 4900 4800 4750 5000 6050 5950 5800 5700 5600 5500 5450 5350 5300 1100V Double Sided Cooling 000 850 750 650 550 500 400 350 300 00 500 3550 3450 3300 300 3100 3000 950 850 800 3000 4300 4150 4000 3850 3750 3650 3500 3450 3350 3500 5000 4850 4650 4500 4350 450 4100 4000 3900 4000 5700 5500 5350 5150 5000 4850 4700 4600 4450 4500 6450 600 6000 5800 5600 5450 5300 5150 5050 5000 7150 6900 6650 6450 650 6050 5900 5750 5600 170Q0603bE 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 1100V ac 000-5000 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/110 106,3±,0 11,8±,0 0` 1 Max. 178 180,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/100 110,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk
Sept. 00 Typower Zilox 1300V ac 000-4500 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1300V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 1 400 000 7 800 000 400 170M8006 500 800 000 15 500 000 445 170M8007 3000 5 000 000 7 500 000 480 170M8008 5KN/130 3500 8 000 000 44 000 000 515 170M8009 170K 578-83 4000 1 000 000 66 000 000 550 170M8010 4500 17 000 000 95 000 000 580 170M8011 - Interrupting rating 300k RMS Symmetrical (Estimated), 197 k tested. - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1300V 000 00 150 150 150 100 100 100 100 050 500 750 700 700 650 650 650 600 600 600 3000 3300 350 350 300 3150 3150 3150 3150 3100 3500 3850 3800 3750 3750 3700 3700 3650 3650 3650 4000 4450 4350 4300 4300 450 400 400 400 4150 4500 5000 4900 4850 4800 4750 4750 4750 4700 4700 1300V Double Sided Cooling 000 450 400 350 300 50 00 150 150 100 500 3050 3000 900 850 800 750 700 650 650 3000 3650 3600 3500 3450 3350 3300 350 300 3150 3500 4300 400 4100 4000 3900 3850 3800 3750 3700 4000 4900 4800 4700 4600 4500 4400 4350 4300 400 4500 5500 5400 550 5150 5050 4950 4900 4800 4750 170Q0601E 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 1300V ac 000-4500 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/130 117,6±, 130,6±, 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk
Sept. 00 Typower Zilox 1300V ac 000-4500 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1300V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 1 400 000 7 800 000 400 170M8079 500 800 000 15 500 000 445 170M8080 3000 5 000 000 7 500 000 480 170M8081 5SKN/130 3500 8 000 000 44 000 000 515 170M808 170K578-83 4000 1 000 000 66 000 000 550 170M8083 4500 17 000 000 95 000 000 580 170M8084 - Interrupting rating 300k RMS Symmetrical (Estimated), 197 k tested. - Suitable microswitches: 170H0069, 170H307 (gold) 1300V Single Sided Cooling 000 00 150 150 150 100 100 100 100 050 500 750 700 700 650 650 650 600 600 600 3000 3300 350 350 300 3150 3150 3150 3150 3100 3500 3850 3800 3750 3750 3700 3700 3650 3650 3650 4000 4450 4350 4300 4300 450 400 400 400 4150 4500 5000 4900 4850 4800 4750 4750 4750 4700 4700 1300V Double Sided Cooling 000 450 400 350 300 50 00 150 150 100 500 3050 3000 900 850 800 750 700 650 650 3000 3650 3600 3500 3450 3350 3300 350 300 3150 3500 4300 400 4100 4000 3900 3850 3800 3750 3700 4000 4900 4800 4700 4600 4500 4400 4350 4300 400 4500 5500 5400 550 5150 5050 4950 4900 4800 4750 170Q0601bE 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 1300V ac 000-4500 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/130 11,3±, 17,8±, 0` 1 Max. 178 180,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/100 110,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk
Sept. 00 Typower Zilox 1500V ac 000-400 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1500V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 1 800 000 9 950 000 390 170M8019 500 3 550 000 0 000 000 430 170M800 3000 6 300 000 35 000 000 465 170M801 5KN/130 3500 10 000 000 56 000 000 500 170M80 170K 58-3 4000 15 000 000 84 500 000 530 170M803 400 17 500 000 98 500 000 545 170M804 - Interrupting rating 300 RMS Symmetrical (estimated), 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1500V 000 00 150 150 150 100 100 100 100 050 500 750 700 700 650 650 650 600 600 600 3000 3300 350 350 300 3150 3150 3150 3150 3100 3500 3850 3800 3750 3750 3700 3700 3650 3650 3650 4000 4450 4350 4300 4300 450 400 400 400 4150 400 4650 4550 4550 4500 4450 4450 4400 4400 4400 1500V Double Sided Cooling 000 450 400 350 300 50 00 150 150 100 500 3050 3000 900 850 800 750 700 650 650 3000 3650 3600 3500 3450 3350 3300 350 300 3150 3500 4300 400 4100 4000 3900 3850 3800 3750 3700 4000 4900 4800 4700 4600 4500 4400 4350 4300 400 400 5150 5050 4900 4800 4700 4650 4550 4500 4450 170Q0605E 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 1500V ac 000-400 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5KN/130 117,6±, 130,6±, 5 pcs. M1 Max. depth of hole 1,5mm. Min. length of thread 10mm. ø 90,0` 0,5 daptor Max. 178 Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on bussmann@bussmann.dk
Sept. 00 Typower Zilox 1500V ac 000-400 Size/type Rated current RMS-amp Electrical Characteristics Pre-arc I t( s) Clearing at 1500V Watts Loss [W] Ordering Information Ref. No. With indicator Curves Data sheet 000 1 800 000 9 950 000 390 170M8089 500 3 550 000 0 000 000 430 170M8090 3000 6 300 000 35 000 000 465 170M8091 5SKN/130 3500 10 000 000 56 000 000 500 170M809 170K58-3 4000 15 000 000 84 500 000 530 170M8093 400 17 500 000 98 500 000 545 170M8094 - Interrupting rating 300 RMS Symmetrical (estimated), 197 k tested - Suitable microswitches: 170H0069, 170H307 (gold) Single Sided Cooling 1500V 000 00 150 150 150 100 100 100 100 050 500 750 700 700 650 650 650 600 600 600 3000 3300 350 350 300 3150 3150 3150 3150 3100 3500 3850 3800 3750 3750 3700 3700 3650 3650 3650 4000 4450 4350 4300 4300 450 400 400 400 4150 400 4650 4550 4550 4500 4450 4450 4400 4400 4400 1500V Double Sided Cooling 000 450 400 350 300 50 00 150 150 100 500 3050 3000 900 850 800 750 700 650 650 3000 3650 3600 3500 3450 3350 3300 350 300 3150 3500 4300 400 4100 4000 3900 3850 3800 3750 3700 4000 4900 4800 4700 4600 4500 4400 4350 4300 400 400 5150 5050 4900 4800 4700 4650 4550 4500 4450 170Q0605bE 00.1.0 M on bussmann@bussmann.dk
Typower Zilox 1500V ac 000-400 Total clearing I t The total clearing Itatrated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing Itisfound by multi- plying by correction factor, K, given as a function of applied working voltage, E, (RMS). g rc Voltage This curve gives the peak arc voltage, U L, which may appear across the fuse during its operation as a function of the applied working voltage E g, (RMS) at a power factor of 15%. Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p, is given as a function of the RMS load current, I, in % of the rated current. b Dimensions Flush End Contact Size 5SKN/130 11,3±, 17,8±, 0` 1 Max. 178 180,0` 0,3 4 pcs. n 14,0` 0,3 9,7` 0,3 c 0,/100 110,0` 0,3 160` 1 3, 3, n 90,0` 0,5 Min. 10, 5 pcs. M1 Max. depth of hole 1,5 mm. Min. length of thread 10mm daptor Dimensions in mm 1mm = 0,0394" 1" = 5,4mm on ussmann@bussmann.dk
USSMNN OFFICES ROUND THE WORLD EUROPEN HEDQURTERS ussmann Division Cooper (UK) Limited urton-on-the-wolds Leicestershire LE1 5TH, UK Telephone: + 44 (0) 1509 88 7 37 Facsimile: + 44 (0) 1509 88 7 86 HEDQURTERS Cooper Industries ussmann Division P.O. box 14460 St. Louis, Missouri 63178-4460, US Telephone: + 1 314 394 877 Facsimile: + 1 800 544 570 ussmann in Denmark ussmann International Inc. Literbuen 5 DK-740 Skovlunde Copenhagen Denmark Telephone: + 45 44 85 09 00 Facsimile: + 45 44 85 09 03 ussmann in Mexico rrow-hart S.. de C.V. Poniente 148, No. 933 0300 Mexico, D.F. Mexico Telephone: + 5 5 587 011 Facsimile: + 5 5 567 4893 ussmann in ustralia ussmann ustralia lock X 391 Park Road Regents Park NSW 143 ustralia Telephone: + 61 9743 8333 Facsimile: + 61 9743 8070 ussmann in razil ussmann das razil Ltda Rodovia Santos Dumont, Km 3 Cruz das lmas Itu-Sao Paulo 13 300-000 razil Telephone: + 55 11 784 1856 Facsimile: + 55 11 784 171 ussmann in India Cooper ussmann India Private Limited Evr. Street, Sedarapet 3-9 St. Marks Road PONDICHERRY 605 111 India Telephone: + 91 413 670 04 Facsimile: + 91 413 677 010 ussmann Circuit Components 73000 West Wilson venue Chicago, IL 60656-4793, US Telephone: + 1 708-867-4600 Facsimile: + 1 708-867-11 ussmann sia Pacific ussmann International, Inc., US Singapore ranch 1 Jalan Kilang Timor #06-01 Pacific Tech Centre Singapore 159303 Republic of Singapore Telephone: + 65 6 78 6151 Facsimile: + 65 6 78 3151 This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design application. ussmann reserves the right to change design or construction of any products. ussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
CIRCUIT PROTECTION SOLUTIONS ussmann are one of the world s leading suppliers of fuses and fusible protection systems. Provider of the world s first truly global product line, each product is backed by an efficient world-wide distribution network service and unrivalled technical support. ussmann circuit protection solutions comply with major international standards: S, IEC, DIN and UL. ELECTRONIC LOW VOLTGE FUSE LINKS ussmann high speed fuses use advanced materials and technology. The products are specifically designed for protecting power semiconductors. LV CIRCUIT COMPONENTS LOW VOLTGE FUSEGER S5-00 HIGH SPEED FUSES HIGH VOLTGE PRODUCTS ussmann Division Cooper (UK) Limited urton-on-the-wolds Leicestershire LE1 5TH UK Telephone: 44 (0) 1509 88 737 Facsimile: 44 (0) 1509 88 786 http://www.bussmann.com Your Representative REPRO & TRYK /S. 97 5 73 44. 7800 SKIVE Industries company.