GENERAL ELECTRIC CONCEALED CHILLED WATER FAN COIL UNITS ACWL Series ACWL0 thru ACWL4 00 CFM thru 400 CFM GE_ACWL_series.indd 3// : PM
CONTENTS Model decoding 3 Unit features 3 Standard specifications 3-4 O ptions 4 Physical data 5 Cooling capacities -9 Fan performance data 0- Sound power data Hot water capacities Unit dimensions 3 Coil connection dimensions 4 Heater box dimensions & arrangements 5 Valve packages 5 Typical schematic wiring diagram - Installation E lectrical Maintenance 8 8 8 Continuing research results in steady improvements. Therefore, these specifications are subject to change without notice GE_ACWL_series.indd 3// : PM
DECODING,, 3 & 4 BASIC (SERIES) ACWL HORIZONTAL CONCEALED CHILLE D WATER FA N COIL UNITS 5 & SIZE (x 00 CFM) 0 03 04 0 08 0 4 ELECTRICAL SUPPLY (V-Ph-Hz) B : 0/40-- 8 COIL A : 3 ROW CHILLE D WATE R B : 4 ROW CHILLE D WATE R J : 3 ROW CHILLE D WATER + RO W HEATIN G 9 HEATER N : NO HEATER B : kw D : kw E : 3 kw F : 4 kw G: 5 kw N : NO HEATER D : kw E : 3 kw F : 4 kw G: 5 kw J : kw M: 0 kw 0 ACCESSORIES N : STANDARD B : 3D VALVE PACKAGE (COOL ONLY) K : 4D VALVE PACKAGE (HEAT & COOL ) FIN A : ALUMINUM FIN B : COATED ALUMINUM FI N C : COPPER FI N COIL CONNECTION R : R H SIDE, STANDARD (FACING AIR DISCHARGE) L : LH SIDE, OPTIONAL (FACING AIR DISCHARGE) 3 FILTER N : NONE A : ALUMINUM (/" THICK) C : SYNTHETIC (/" THICK) 4 OPTION N : STANDARD UNIT (WITHOUT THERMOSTAT ) T : UNIT WITH THERMOSTAT UNIT FEATURES LOW HEIGHT UNITS Good for spaces with low ceiling height. COMPACT DIMENSIONS Ideal to fit into tight spaces. EASY MAINTENANCE / ONE SIDE ACCESS Filters can be easily removed by sliding. Piping and controls are on one side for easy access. BACK AND BOTTOM RETURN AIR OPTIONS SINGLE COIL FOR RH & LH APPLICATIONS (FIELD CHANGEABLE FOR RH & LH APPLICATIONS) SPLIT COILS, CHILLED + HOT WATER OPTIONS VALVE PACKAGES FOR PIPE & 4 PIPE SYSTEMS WIDE RANGE OF HEATER SIZES QUIET, PULSE FREE AIR DELIVERY Centrifugal fans that are statically and dynamically balanced, handle up to 0.5 w.g. external static pressure allowing you to keep the unit away from your comfort zone. STANDARD SPECIFICATIONS UNIT CONSTRUCTION These units are fabricated of heavy gauge galvanized steel to ensure lasting durability and dependable performance with minimum maintenance. The panels are insulated to provide positive protection against sweating and maximum damping of air noise. This unit is designed for those concealed overhead installations which require supply ductwork. A duct collar is provided into the front panel for supply air duct connection. The standard arrangement provides return air from the rear side. This arrangement may be reversed to provide bottom return air by simply interchanging the bottom and rear panel. This reversal can be easily accomplished in the field. Access to the blower motor assembly is provided through the removable bottom panel from where the complete fan/motor can be removed for servicing. FANS The centrifugal, forward curved, double width fan wheels are statically and dynamically balanced for quiet and smooth performance. Blower housing is rugged galvanized steel to provide added rigidity and assure quiet & smooth operation. 3 GE_ACWL_series.indd 3 3// : PM
STANDARD SPECIFICATIONS MOTORS Motors are permanent split capacitor type with three speed windings and built-in thermal overload protection. The bearings are of sleeve type. FILTERS All models are furnished with / thick permanent washable type aluminum filters as standard. COILS Coils are 3/8 OD copper tubing, constructed of enhanced copper tubes and mechanically bonded to aluminum As fins. an option, corrugated copper fins or coated aluminum fins may be provided. Manual air vents are provided on all chilled water coils. The standard chilled water coil is 3 rows for all models & 4 row chilled water coil is also provided as an option. A 4 pipe coil consisting of 3 rows of cooling coil and row of heating coil is used for heating application. Each coil is pressure tested in the factory at not less than 300 psi (00 kpa) air pressure. Coils conform to ARI 40. DRAIN PAN The condensate drain pan is fabricated of 8 gauge galvanized steel. The drain pan is powder coat painted. The outer surface is thermally insulated. DRIP LIP The purpose of a drip-lip is to capture any condensate from the valve packages and direct it to the drain pan. It is fabricated of a single metal formed to fit on the side of the drain pan. They may be installed in the field and should always be pitched towards the drain pan to assure proper drainage. This will be supplied loose for field installations along with valve packages. OPTIONS ELECTRIC HEATERS The heater element is of the resistance open coil type. Thermal overheat cut-outs and fusible links are provided to shutoff power to heaters in case of airflow failure. VALVE PACKAGES Valve packages are available as an option (3D for two pipe system and 4D for four pipe systems). These valves can be factory installed or supplied loose for field installation. THERMOSTAT An attractive wall mount three speed electronic thermostat with all required functions and features for safe and smooth operation which can be used for cooling & heating requirements. 4 GE_ACWL_series.indd 4 3// : PM
PHYSICAL DATA NUMBER ACWL0 ACWL03 ACWL04 ACWL0 ACWL08 ACWL0 ACWL ACWL4 P OWE R S UP P LY, V-P h-hz 0/40-- BLOWER Type F orward Curve d Size (mm) 4x9 4x9 4x9 4x3 4x3 85x3 85x3 85x3 Quantity BLOWE R MOT OR Quantity F LA 0. 0. 0....5.5.5 Watts @ 0.0 ESP, high speed 8 08 5 0 38 35 390 COOLING COIL Type Corrugated Fin & Tube Tube dia. - Rows - FPI 3/8-3 - 4 3/8-3 - 4 3/8-3 - 4 3/8-3 - 4 3/8-3 - 4 3/8-3 - 4 3/8-3 - 4 3/8-3 - 4 Face area, Sq. ft. (Sq. m.).(0.3 ).(0.3 ).(0.3).(0.9).(0.9) 3.33(0.3) 3.33(0.3) 3.54(0.39) HOT WATER COIL Type Corrugated Fin & Tube Tube dia. - Rows - FPI 3/8 - - 4 3/8 - - 4 3/8 - - 4 3/8 - - 4 3/8 - - 4 3/8 - - 4 3/8 - - 4 3/8 - - 4 Face area, Sq. ft. (Sq. m.).(0.3 ).(0.3 ).(0.3).(0.9).(0.9) 3.33(0.3) 3.33(0.3) 3.54(0.39) COIL CONNECTIONS Chilled water, Inlet - Outlet (inch) 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 Hot water, Inlet - Outlet (inch) 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 5/8-5/ 8 DRAIN CONNECTIO N S ize (inch) /8 /8 /8 /8 /8 /8 /8 /8 RETURN AIR FILTER Size (inch) 8 x 3-3/8 8 x 3-3/8 8 x 3-3/8 8 x 9-5/8 8 x 9-5/8 0 x -/8 0 x -/8 0 x -/8 (/'' THICK) Quantity SHIPPING WEIGHT kg. (approx. ) 30 30 30 40 40 54 54 54 5 GE_ACWL_series.indd 5 3// : PM
CHILLED WATER COOLING CAPACITIES 3 ROW COIL (ENGLISH UNITS) ENTERING AIR TEMP. = 0 F DB/3 0 F WB (@ HIGH SPEED) ( 0 F) 8 0 UNIT 40 0 F EWT 45 0 F EWT 0 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM 0 9.05.43..99 5.5.5 5. 4.88.9 03 9.99.8..8.5.95 5. 5.55.44 04 0.5.3.4 8.30..0.09 5.9.5 0 8.4 3. 3 4.0 4.3.45 3.58 0.4 0.. 08 0.8 4. 5.0 5.9.4 3.95.5 0.4.8 0 30..9 5.5 3.54 8.8 5.88. 0.49 4. 3.90.9.9 4.59 9.0.5.8.8 4.4 4 34.9 5.0 8.3.9.43.0 9.3 8. 4.84 0 8.4..3.8 5.39.3 5.0 4..00 03 9..9.93.0.0.5 5.5 5.40. 04 0.5.43.05 8.04.. 5.89 5..8 0.9. 3.54 3.83.. 0.0 9 9.8.0 08 9.5 4. 3.90 5..33 3.04.0 5 0.8. 0 9.0 0.9 5.8. 8. 4.5.4 0 5.94 3.8 30.3.9 5.0 3.58 9.0 4..0.8 3.4 4 33.08 3.8 9. 5.3 0.5 5.3 8.5 8.09 3.0 0 8.4.05.4. 5.9. 4.88 4. 0.8 03 9.44.83.5.40 5.9.3 5.40 5. 0.90 04 0.00...83.34.3 5.9 5.0 0.95 0.0.4.8 3.43 0.85.4 9.5 9.54.3 08 8.9 3. 9 3.5 4.3.99.45 0. 4 0.54. 0 8.3 0.3 5 4.9.8.5 3.5 5.8 0 5.4.3 9.35.3 0 4.89.8 8.45 3.80.4..4 4 3.9 3. 4 5.3 4.3 0.0 4.. 9..9 ENTERING AIR TEMP. = 80 0 F DB/ 0 F WB (@ HIGH SPEED) ( 0 F) 8 0 UNIT SIZE 40 0 F EWT TC SC GPM 45 0 F EWT TC SC GPM 0 F EWT TC SC GPM 0 4. 3 8.9 3.8.35.9 3.09 0.0 4.0.5 03.5 0.3 4.3 3.8 8.95 3.44.3.98.8 04.5 4 0.80 4.38 4.0 9.54 3.5.5 8..94 0 3.0 4 9.00. 5.9..4 0.58 4.4 5.4 08 34.4. 8. 8.38 8.55.09.59.38 5.5 0 5. 3.5 3. 9 43..93 0.8 34.3 5 4.48 8.59 55.3 33.8 3.8 4 45.9 9.3.3 35.8 4 5. 8.9 4. 3.4 5. 8 49.8 3..45 39. 8 8.0 9.8 0 3.90 8.5 0. 8..5.3 9.4 5.3.8 9 03 5.4 9.5 4 3.0 9.8 3 8.4.5 0.58.. 04.3 5 0.3 3. 3.53 8.93..3 8.9.4 0 8. 0.0 5.4 3. 5.5 4.3 9.40 4.0 3.88 08 3. 0 9.0.3. 8.35 5.53.43 5. 4.8 0 48. 0 9.58 9. 39.40 5.5.88 3.9 3.0.39. 30.98 0.0 5 4.05.9 8. 33.4 4.4.8 4 55. 8 33.9.0 3 44.95 9.44 8.99 3.4 3.39.8 0 3.9 8. 0. 0. 0..8 5 9. 5..5 4 03 4.55 9.0 3.4.4 8. 8.0 0.33.5. 04 5.4 9. 3.5 8 3. 8 8. 3. 0 0.95 8.0.8 0.. 4.4. 5.0 3.9 8.8 3.3 3.4 08 9. 3 8.49 4.94 5.4.8 4.9 0. 5.9 3.4 0 44.4 8.55.4 3.49 4..5 30.9.4 5.5 4.3 8.. 39.8 5.8.53 3. 3.55 5.38 4. 3.44 8.44 4. 8.. 35. 5.0 5.85 ENTERING AIR TEMP. = 84 0 F DB/ 0 F WB (@ HIGH SPEED) ( 0 F) 8 0 UNIT SIZE 40 0 F EWT TC SC GPM 45 0 F EWT TC SC GPM 0 F EWT TC SC GPM 0 0.84.8 5. 8. 0.4 4.5 5.9 9.8 3.95 03 3.5.8 3 5.89 0.0.5 5.5. 0.44 4.43 04 5. 3..9.95.33 5.49 8.8 5. 4. 0 45.3 4.5 5.3 39.9.8 9.80 33.45 9.3 8.3 08...9 43.9 4.5 3 0.95 3..99 9.30 0 8.3 4.5 5 9.8.5 3.4 3.88 5.08 33.5 4. 83. 44.9 5 0.8. 39.4 8. 59.9 35.0 4.9 9 4 9..0 3.5 8.9 43. 9.3.30 38.59.5 0 9.8 0. 9 3.94. 9.3 3.45 4.9 8.4.98 03.0.0 4.4 9.3 0.88 3.8. 9.8 3.3 04 3..8 4.0 0.5.0 4.0.5 9 0.5 3.5 0 4.0. 4 8.34 3. 0.35.4 30.9 3 8.35.9 08 4.39 5.3 9.8 40.4.9 8.03 34. 4 0.43.83 0.4 38. 4.3.33 34.3. 5.0 30.0 0.4 0 4.3 40. 8 4.95 4.30 3.0 5.8 54.4 3. 0.8 8 4 8. 44.9 0.5 0.8 39. 4. 59.80 35.33.9 0 8.9 0. 3 3.3.4 9.3.4 4. 8.3.3 03 0.9.4 9 3.49 8.30 0.3 3.05 5. 9.40. 04.. 3.0 9.35.0 3..5 4 9.98. 0 39..4 3.5 33.95 9. 5. 8.9 3.33 4.8 08 43.4 3.. 3.38..3 3. 9 9. 5.8 0 5.93 3.0 0.99 5.88 3.0 9.48 48.8 8. 8.03 9.0 3. 5. 59.43 33. 0 9.90. 30.09 8.3 4 5.93 4.4 9.5 5.3 3.8 0.8 55.00 3.90 9. NOTE: For any other conditions, please use selection so ware for fan coil units. Apart from capacities, this so ware provides; a) Sensible heat ratio b) Leaving air temperature (DB/WB) - 0 F c) Leaving water temperature - 0 F d) Leaving water velocities (FPM) e) Water pressure drop (feet of water) LEGEND: TC - Total Capacity (MBH) SC - Sensible Heat Capacity (MBH) - Water Temperature Rise ( 0 F) EWT - Entering Water Temperature ( 0 F) GPM - Water flow (Gallons Per Minute) GE_ACWL_series.indd 3// : PM
CHILLED WATER COOLING CAPACITIES 4 ROW COIL (ENGLISH UNITS) ENTERING AIR TEMP. = 0 F DB/3 0 F WB (@ HIGH SPEED) ( 0 F) 8 0 UNIT 40 0 F EWT 45 0 F EWT 0 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM 0 0.5.30.3.99..00 5.8 5.34.4 03.9 8.39.98 9.08.09..9.4. 04. 8.9 3.5 9.4.58.4.09.. 0.0 5.5 5 5.53.8 3.03 4.. 0.4 3.05 08 4.3. 3.08 8.44 4.53 4. 3.4 3. 3.3 0 3.00 5.9 9.5.54.44.89 9.9 8 8.5 4.99 38.4. 9. 8.80.5.0 0.8 5 9.5 5. 4 4.40 9. 5 0.0 3.4 4.5 3.8.8. 5. 0 9.8.89.9.3 5.95.55 5. 5.3.4 03..9.4 8.8.9..48.09.30 04.9 8.49.38 9.35.38.8.8..3 0 0. 4. 4...5 3...09.35 08.8. 4.55.5 4.0 3.55.9.33.58 0 34.0 4.0 8.80.4 0.3 5.8 9. 9 8.0 3.84 35.5 5. 5..59. 5.5 9.9 9 8.9 4.00 4 38.80.5. 30.0 3.0.00. 0.5 4.34 0 9.0.4.0.5 5.85. 5.5 5.3 0.93 03 0.9.80.83 8..8.43.30 5.9.05 04. 8.30.94 9..3.5..35. 0 0.03 4. 3.34 5..35..4 0.8.90 08.08 5.8 3.8. 3..8.4 8.0.08 0 3.88 3.3 8 5.48 5.5 0.5 4. 8.5 3.5 3.09 34.33 4.4 5...0 4.44 9. 8 8.38 3. 4 3.38. 3.3 8.9.90 4.83 0.9 9.9 3.48 ENTERING AIR TEMP. = 80 0 F DB/ 0 F WB (@ HIGH SPEED) ( 0 F) 8 0 UNIT SIZE 40 0 F EWT TC SC GPM 45 0 F EWT TC SC GPM 0 F EWT TC SC GPM 0.0 0 0. 4.5 4.8 8.93 3.5.4.90.9 03 9.5.8 4.89.34 0.38 4.0 8 3. 4 9. 0 3.3 04 0.85.3 5..3.08 4.3 4 4.0 9.8 3.5 0 0 3.3.35 9.8 30. 9.45. 8 4.5.08. 08 4.43 5.0 0.3 34.0. 4 8.5.0 9.0.80 0 3. 38.9 5.9 4 5.8 3.8 3 3.04 4.43 8.5 0.3.09 40.4. 54.4 34.5 4 3.8 43.34 9.9 0.8 3 4 4.3 44. 8.5 9 0.4 38.0 5.0 4.3 3.83.9 0.09 9. 3. 3.49 8.5 0. 0 0.9 5.5. 9 03 8.3.5 3. 5.30 9.80 3.0.3 8..4 04 9.4.8 3.89.8 0.43 3. 4 3.0 5 9.. 0 34.33 0.8.8 8.39 8. 5. 8. 5.9 4.53 08 3.99 3..0 3. 0.. 5 5.03.80 5.00 0 5.99 35.04. 0 4.5 30.3 9.5 3.9.4.54 0.5 3.8. 5 49.0 3. 9.94 39.5. 5.85 4.89 40.44 3.3 8 54.5 34.8 0 0.9 4.95 30.9 8.59 0 5.34 9..5.8 8. 3. 4 0.4 9.. 5 03.3 0.0.89 4.4 9.3.40.00 8.4 9.0 0 04 8.35.5 3.0 5.3 9.95.55.3 9.0. 0 3. 9. 5.3.54.4 4.4.9 5.5 3. 08 35.35.0 5.89 9.3 9.09 4.8 9 4.5.34 4.04 0 53. 3. 8.9 43.98 8.3.3 3 3.5 5.53.0 5.4 34.3 9.3 45.9 9.. 5 3..9.9 4.5 3. 0..09 3.3 3 8.35 4.5 9. 5.8 ENTERING AIR TEMP. = 84 0 F DB/ 0 F WB (@ HIGH SPEED) ( 0 F) 8 0 UNIT 40 0 F EWT 45 0 F EWT 0 F EWT SIZE TC SC GPM TC SC GPM TC SC GPM 0 4.0.9.0.09. 5. 8. 0.3 4.55 03 8.0 5.0.00 4.44 3.45..0.0 5.5 04 30.00.9.. 4.4.53.4.9 4 5.0 0 54.4 4 9. 3. 4.0 5..5 40.0 4.88 0.0 08.4 33.08 5.3 5.83 9.0 3. 44. 5.4. 9 0 8. 3 49.0.9 0 8.08 44. 0 0.5 9.0 9 39.. 0.89 54. 5.4 8. 0 4.8..8 4.3 8.9 4 09.0 59. 0.30 9. 4 5. 4. 8 80.8 45. 0. 0.. 4.54 9.94 0.93 3.99.4 9.83 3.45 03.0 4. 5.4.9.9 4.58 9..43 3.94 04.94 5.3 5.59 4.3 8 3.55 4.8 0.93. 4.8 0 49.9.94 9.98 43.3 0 3.9 8. 3.99.38.40 08 55.80 30.9. 48.. 9.4 4.0 3.90 8.0 0 8.0 4.33. 4.04 40.9 4.8. 3.00.54 90.0 48.83 8.4.8 4.85 5.5 5. 3.8 3.5 4 00. 54. 8 0.4 8. 4.9..5 4. 4 4. 0..0 3. 9.0 0.49 3.8.4 9.45.4 03 4.8 3.49 4.4. 3.0 3. 8. 0.9 3. 04.43 4.3 4.40 3.0 5.88 3.84 9.. 3.9 0 4. 5.33.9 40..58. 34.9 0.5 5.8 08 5.94 8. 8. 44.9 4 5..49 38..49.3 0 9.5 4.95 3. 5 8.5 3.9.43 58. 33.8 9.9 83.4 4 45. 3.9.8 39.8 5.9 0. 8 35.43 0. 3 4 9. 49. 5.3 5 9.0 43. 9 3.8. 3 38.8. NOTE: For any other conditions, please use selection so ware for fan coil units. Apart from capacities, this so ware provides; a) Sensible heat ratio b) Leaving air temperature (DB/WB) - 0 F c) Leaving water temperature - 0 F d) Leaving water velocities (FPM) e) Water pressure drop (feet of water) LEGEND: TC - Total Capacity (MBH) SC - Sensible Heat Capacity (MBH) - Water Temperature Rise ( 0 F) EWT - Entering Water Temperature ( 0 F) GPM - Water flow (Gallons Per Minute) GE_ACWL_series.indd 3// : PM
CHILLED WATER COOLING CAPACITIES 3 ROW COIL (METRIC UNITS) ENTERING AIR TEMP. = 5 0 C DB/ 0 C WB (@ HIGH SPEED) ( 0 C) 5 UNIT 4 0 C EWT 0 C EWT 0 0 C EWT SIZE 0.5.89 0..93.4 0.09.3.3 0.0 03.8.4 0.3..85 0.0.5.5 0.0 04.99.8 0.4.9.98 0..0.0 0.08 0 5. 3.93 0.5 3.94 3.39 0.9.4.4 0.3 08 5. 4.3 0. 4.33 3. 0. 3.0 3.0 0.4 0 8.5.4 0.4.44 5.53 0.3 4.4 4.4 0. 8.9.8 0.43. 5.80 0.3 4.5 4.5 0. 4 9..38 0.4.3.30 0.35 5.04 5.04 0.4 0.4.8 0.0.89. 0.08.33.33 0.05 03.5.0 0..0.8 0.08.4.4 0.0 04.9.4 0..3.93 0.09.55.55 0.0 0 5.03 3.83 0.0 3.8 3.30 0.5.5.5 0. 08 5.54 4.5 0. 4.0 3. 0..90.90 0. 0 8.4.8 0.33.4 5.38 0.5 4.30 4.30 0. 8.0.5 0.34. 5.3 0. 4.4 4.4 0.8 4 9.3.4 0.3.0. 0.8 4.85 4.85 0.9 0.4.83 0.08.85.58 0.0.9.9 0.04 03.0.0 0.09.0.8 0.0.43.43 0.05 04.8.9 0.0..89 0.0.. 0.05 0 4.9 3.5 0. 3.3 3.3 0.3.5.5 0.09 08 5.39 4.5 0.8 4.08 3.5 0.4.9.9 0.0 0 8.0. 0..0 5.5 0. 4.5 4.5 0.4 8.3.4 0.9.30 5.49 0. 4.3 4.3 0.5 4 9.08.9 0.3.84 5.95 0.3 4. 4. 0. ENTERING AIR TEMP. = 0 C DB/9.5 0 C WB (@ HIGH SPEED) ( 0 C) 5 UNIT SIZE 4 0 C EWT 0 C EWT 0 0 C EWT 0 4.34. 0. 3.0.34 0..8 8.0 0. 4 03 4.85 3.00 0. 3 4.00. 3 0.9 3. 8.3 3 0. 5 04 5.4 3.9 0. 5 4.3.8 0 0.0 3.3 8.4 9 0. 0 9.0 5.0 0.4 3.43 4.8 8 0.35 5.8 5 4. 9 0. 8 08 0.04. 3 0.48 8. 5.4 0.3 9.4 8 4. 9 0.3 0 5.3 9.4 3 0. 3.44 8.3 0.59 9..0 8 0.4.05 9.90 0..99 8.5 0. 0. 3.43 0.48 4.8 0.88 0.84 4. 9.34 0.8.0 8.0 9 0.53 0 4.3.55 0. 3.4. 3 0.4. 8.0 0. 03 4.59.85 0. 8 3.8.5 0 0.5 3.. 9 0. 04 4.85 3.03 0. 9 4.0. 0. 3.3 0.4 4 0. 3 0 8. 5.8 0.3 4.95 4. 0.8 5. 9 4. 9 0. 3 08 9.34 5.84 0.3.9 5. 3 0.3. 4. 0. 5 0 4. 8.8 0 0.5..0 0.4 9.35.8 0.3 4.84 9. 0.5 9.0.9 0.48 9.. 0.3 9 4. 0.09 0.5 3. 8.9 0.5 0.4.8 4 0.4 0 3.95.44 0. 3 3.3. 0.. 3.9 8 0.0 9 03 4.38.3 0. 5 3.0.4 0.3 3.0 5. 5 0. 0 04 4.5.9 0. 3.93. 0.3 3. 3.4 0 0. 0 8.05 5.0 0..8 4.5 0.3 5.5 5 4. 0. 9 08 8.90 5.58 0.3 0.49 5.0 0.. 4.5 0. 0 3.00 8. 0 0.4 4..4 0.38 9.09. 0.3 3.9 8. 9 0.4.. 0.40 9.49.0 3 0.3 4 5.9 9.48 0.5. 8.44 0.43 0.3.4 0.35 ENTERING AIR TEMP. = 9 0 C DB/.5 0 C WB (@ HIGH SPEED) ( 0 C) 5 UNIT SIZE 4 0 C EWT 0 C EWT 0 0 C EWT 0 5.9 3. 0.8 5..9 0.4 4.3. 0. 03.5 3.9 0.3 5.5 3.30 0. 4.8.9 0.3 04.09 3.94 0.34. 3.5 0.9 5. 3. 0.5 0.5.0 0.0 0.8 4.0 0.5 9. 5.55 0.44 08 4..85 0..0.94 0.58 0.09.9 0.48 0..0.04 8.48 0.5 0.88 5.4 9.3 0.4.9. 5.09 9.4.0 0.93. 4 9.9 0. 4 5.4 4.0..45..0. 8 0.5 0.85 0 5.4 3. 0. 4.89.9 0.9 4..5 0. 03.3 3.5 0.5 5.45 3.5 0. 4..84 0.8 04. 3.5 0. 5.8 3.35 0.3 4.88 3.0 0.9 0.8.59 0.4 0. 5.8 0.40 8.55 5.5 0.34 08 3.5.34 0.5. 4.5 0.45 9.40 5.8 0.3 0 0.. 5 0.80.3 9.83 0.8 4. 9 8.3 0.5.0. 0.84.93 0.3 0. 4.9 9.5 0.59 4 3..9 0.93 9..3 0.9.3 0.0 0.5 0 5.4 3.0 0.8 4.9.9 0. 3.9.4 0.4 03.04 3.3 0. 5.0 3.0 0.8 4.40. 0.5 04.39 3.58 0. 5.49 3.0 0.9 4..9 0. 0.3. 0.38 9. 5.58 0.33 8.09 5.0 0.8 08.39.94 0.4 0.5. 0.3 8.94 5.58 0.3 0 8.8 0.5 0.4.0 9.8 0.55 3.3 8.5 0.4 9.4.0 0.. 9. 0.5 3.9 8 8. 0.48 4.9.0 9 0.4 8.38 0.3 0.3 5. 9.44 0.5 NOTE: For any other conditions, please use selection so ware for fan coil units. Apart from capacities, this so ware provides; a) Sensible heat ratio b) Leaving air temperature (DB/WB) - 0 C c) Leaving water temperature - 0 C d) Leaving water velocities (m/s) e) Water pressure drop (kp) LEGEND: TC - Total Capacity (kw) SC - Sensible Heat Capacity (kw) - Water Temperature Rise ( 0 C) EWT - Entering Water Temperature ( 0 C) LPS - Water flow (Liters Per Second) 8 GE_ACWL_series.indd 8 3// : PM
CHILLED WATER COOLING CAPACITIES 4 ROW COIL (METRIC UNITS) ENTERING AIR TEMP. = 5 0 C DB/ 0 C WB (@ HIGH SPEED) ( 0 C) 5 UNIT 4 0 C EWT 0 C EWT 0 0 C EWT SIZE 0.9.4 0.4.9.80 0.0.55.55 0.0 03 3.9.45 0..5.0 0... 0.08 04 3.48. 0...4 0.3.8.8 0.09 0.0 4.5 0.9 4.58 3.85 0. 3.0 3.0 0.5 08. 5.0 0.3 5.05 4.9 0.4 3.5 3.5 0. 0 0.0.48 0.48.53.3 0.3 5. 5. 0.5 0.49.8 0..8. 0.38 5.44 5.44 0. 4.48 8.55 0.55 8.5.0 0.4 5.9 5.9 0.8 0.80.0 0..5. 0.09.5.5 0.0 03 3.0.39 0.3.45.0 0.0.. 0.0 04 3.39.55 0.3.59.0 0.0.8.8 0.0 0 5.8 4.39 0.3 4.4 3. 0.8 3.0 3.0 0. 08.4 4.8 0. 4.90 4. 0.0 3.40 3.40 0.4 0 9.4. 0.38.9.4 0.9 5.04 5.04 0.0 0.0.55 0.40.0.43 0.30 5.5 5.5 0. 4 0.9 8. 0.44 8..98 0.33 5.9 5.9 0.3 0.5.03 0.09..5 0.0.48.48 0.05 03 3.3.35 0..39.0 0.08.. 0.0 04 3.3.5 0..53.5 0.09.. 0.0 0 5. 4.9 0.0 4.35 3.8 0.5 3.0 3.0 0.0 08.30 4. 0. 4. 4.08 0. 3.9 3.9 0. 0 9.3.03 0.3.09.00 0.4 4.89 4.89 0. 9.8.3 0.33.38. 0.5 5.08 5.08 0. 4 0.4 8.00 0.3 8.0.8 0. 5. 5. 0.9 ENTERING AIR TEMP. = 0 C DB/9.5 0 C WB (@ HIGH SPEED) ( 0 C) 5 UNIT SIZE 4 0 C EWT 0 C EWT 0 0 C EWT 0 5.0 3.0 0.4 4..4 0.0 3.35.3 0. 03 5.5 3. 0. 4.5 3.05 0.3 3.9.9 0.8 04. 3.4 0.9 5.04 3. 0.4 4.0.8 0.9 0 0.84.59 0.5 8.8 9 5. 0 0.4.0 4.9 0.3 4 08.0.3 0.58 9.8 3.3 5 0.4. 5.5 3 0.3 0 8.49.8 0.88 5.00 9.5 0..4 8. 0.5 9.4. 0.93 5. 0.04 0. 5. 5 8. 0.5 9 4.4.9.03.9.03 0.8 3 3.4 4 9.4 8 0. 4 0 4.9.90 0.9 3.98.53 0. 3.8. 0.3 03 5.4 3.34 0. 4..9 0.8 3..58 0.4 04 5.8 3.55 0.3 4.5 3.09 0.9 3.83. 0.5 0 0.. 0.4 8.3 5.3 8 0.3 3. 3 4. 4 0. 08.4.90 0.45 9. 4 5.9 0.3.3 3 5.3 0 0. 9 0.4 0.43 0.8 3.90 8.9 0.55 0.94.8 0.44.93 0.94 0. 4.5 9.38 0.58.44 8.0 0.4 4 9.3.0 0.9 5.9 0. 0. 3.4 9 8.9 3 0.5 0 0 4.0.9 0. 3.80.43 0.3 3.09.8 0. 03 5.0 3.9 0.8 4.30.80 0.5 3.54.54 0. 04 5.49 3.39 0.9 4.5.99 0. 3.5. 0.3 0 9. 5.9 0.33.9 5.5 0..4 4.5 0. 08 0.5.53 0.3 8. 4 5. 3 0.3 0. 3 5. 8 0. 4 0.0 9.84 0.55 3.0 8.4 8 0.4 5 0. 3. 3 0.3. 0.30 0.5 3. 8.90 0.4.0 8.00 0.38 4 8.39. 0.3 4.9 9.0 0.5.09 8.0 0.4 ENTERING AIR TEMP. = 9 0 C DB/.5 0 C WB (@ HIGH SPEED) ( 0 C) 5 UNIT SIZE 4 0 C EWT 0 C EWT 0 0 C EWT 0.8 3.3 0.33 5.9 3.30 0.8 5.04.94 0.4 03.90 4.34 0.38.8 3.84 0.33 5.8 3.43 0.8 04 8.43 4.4 0.40. 4.05 0.35.5 3. 0.9 0 5. 8.3 0..9.9 0. 0.90.45 0.5 08.03 9.35 0.8 4.5 0 8.8 0.9.3.3 0.58 0.43 4.4 4..3.49.0 8.5 9 0.9 0.89.9 5..33 3.55 3.8.3 9.5 3.49 0.93 4 3..0 0.49.4 4.59.5.5 9..03 0.5 3.5 0. 5.5 3. 0. 4.8.83 0.9 03.49 4.3 0.30.4 3. 0. 5.48 3.8 0. 04.9 4.40 0.3.8 3.9 0. 5.8 3. 0.3 0 4.8.80 0.5..8 0.48 0.3. 0.4 08 5.8 8. 0.3 3.5 0. 0.54.30.8 0.45 0 4.9 3.3 3 0.9 0..3 0.8. 3 0.3 0.9 5.55 4.0 3.0.. 0.8 8.0 4 0.5 0. 4 8.9 5.5.3 3.9 3.4 0.95 9.8 4.9 0.9 0. 3.44 0. 5.44 3.0 0.9 4..3 0. 03. 3.9 0.4.8 3.5 0. 5.3 3.5 0.8 04. 4. 0..55 3.5 0. 5.5 3.35 0.9 0 3.43.4 0.4.5.55 0.39 9.8 5.83 0.33 08 4.89 8.4 0.5..8 0.43 0.3.4 0.3 0.5.5 3 0.8 9.38 0.98 0.. 9.0 0.55 3.85 3. 5 0.8 0..5 0.9.8 0. 0.58 4.30 4.4 8 0.90.9.4 0. 8.4 9. 0.3 NOTE: For any other conditions, please use selection so ware for fan coil units. Apart from capacities, this so ware provides; a) Sensible heat ratio b) Leaving air temperature (DB/WB) - 0 C c) Leaving water temperature - 0 C d) Leaving water velocities (m/s) e) Water pressure drop (kp) LEGEND: TC - Total Capacity (kw) SC - Sensible Heat Capacity (kw) - Water Temperature Rise ( 0 C) EWT - Entering Water Temperature ( 0 C) LPS - Water flow (Liters Per Second) 9 GE_ACWL_series.indd 9 3// : PM
FAN PERFORMANCE DATA / 3 ROW COILS (ENGLISH UNITS) NUMBER BLOWER MOTOR SPEED CFM @ EXTERNAL STATIC PRESSURE (Inches of water) 0.0 0.05 0. 0.5 0. 0.5 0.3 0.4 0.5 HIGH 95 83 0 45 0 00 80 0 54 ACWL0 MEDIUM 53 40 3 05 88 0 55 4 5 LOW 5 5 05 93 80 5 - - HIGH 3 34 330 30 90 0 30 90 5 ACWL03 MEDIUM 340 35 30 85 0 35 0 - - LOW 30 9 84 40 5 90 - - HIGH 400 380 30 340 30 90 0 0 90 ACWL04 MEDIUM 3 34 330 30 90 0 3 0 90 - LOW 340 35 30 85 0 35 0 - - HIGH 33 00 558 55 438 30 80 ACWL0 MEDIUM 0 59 5 58 44 395 3 8 0 LOW 48 45 40 35 9 3 30 0 HIGH 8 39 00 49 598 5 4 40 390 ACWL08 MEDIUM 33 00 558 55 438 3 0 80 5 0 LOW 0 59 5 58 44 395 3 80 HIGH 080 045 00 95 90 88 83 580 ACWL0 MEDIUM 93 909 880 85 8 8 3 5 30 49 0 LOW 83 83 808 5 4 98 55 50 4 HIGH 5 8 080 040 000 94 89 8 0 ACWL MEDIUM 080 045 00 95 90 88 83 580 LOW 93 909 880 85 8 8 35 30 490 HIGH 0 09 0 030 000 98 ACWL4 MEDIUM 5 8 080 040 000 94 89 8 0 LO W 080 04 5 00 95 90 88 83 580 FAN PERFORMANCE DATA / 4 ROW COILS (ENGLISH UNITS) BLOWER MOTOR CFM @ EXTERNAL STATIC PRESSURE (Inches of water) NUMBER SPEED 0.0 0.05 0. 0.5 0. 0.5 0.3 0.4 0.5 HIGH 83 0 45 0 00 80 5 43 ACWL0 MEDIUM 53 40 3 05 88 0 3 3 9 LOW 5 05 93 80 5 5 - - HIGH 34 330 30 90 0 30 0 83 59 ACWL03 MEDIUM 35 30 85 0 35 0 0 5 - - LOW 9 84 40 5 90 95 - - HIGH 380 30 340 30 90 0 35 00 8 ACWL04 MEDIUM 34 330 30 90 0 30 0 9 5 - LOW 35 30 85 0 35 0 05 - - HIGH 33 00 558 55 438 30 30 5 0 ACWL0 MEDIUM 59 5 58 44 395 3 8 8 5 5 LOW 48 45 40 35 9 3 3 0 49 HIGH 39 00 49 598 5 4 43 405 85 ACWL08 MEDIUM 33 00 558 55 438 30 3 0 5 0 4 LOW 59 5 58 44 395 3 88 5 0 HIGH 045 00 95 90 88 83 9 5 ACWL0 MEDIUM 909 880 85 8 8 35 8 3 5 0 44 0 LOW 83 808 5 4 98 55 08 5 403 HIGH 8 080 040 000 94 89 835 94 535 ACWL MEDIUM 045 00 9 5 9 0 88 83 9 5 480 LOW 909 880 85 8 8 35 83 50 430 HIGH 0 09 0 030 05 984 9 ACWL4 MEDIUM 8 080 040 000 94 89 835 94 540 LOW 045 00 95 90 88 83 9 5 4 Note:. Values include losses for dry coil and filters.. Airflow values are in CFM. 0 GE_ACWL_series.indd 0 3// : PM
FAN PERFORMANCE DATA / 3 ROW COILS (METRIC UNITS) NUMBER BLOWER MOTOR SPEED LITERS PER SECOND @ EXTERNAL STATIC PRESSURE (Pascal) 0.0.5 5 3.5.5 5 00 5 HIGH 39 33 04 94 85 80 3 ACWL0 MEDIUM 9 3 05 9 88 80 3 8 LOW 0 0 9 9 85 8 - - HIGH 3 5 4 3 3 09 90 83 ACWL03 MEDIUM 0 53 4 35 3 99 - - LOW 4 40 34 4 3 0 90 - - HIGH 89 9 0 0 5 3 3 99 90 ACWL04 MEDIUM 3 5 4 3 3 09 9 0 - LOW 0 53 4 35 3 99 - - HIGH 34 99 83 3 43 0 0 3 8 ACWL0 MEDIUM 88 9 0 44 9 8 54 8 85 LOW 4 3 90 38 09 09 99 HIGH 3 349 330 30 8 4 0 98 84 ACWL08 MEDIUM 34 99 83 3 43 0 0 3 8 LOW 88 9 0 44 9 8 54 8 85 HIGH 493 4 455 434 44 395 340 4 ACWL0 MEDIUM 44 49 45 40 38 3 34 9 3 LOW 40 394 38 3 3 39 309 4 HIGH 54 58 49 4 44 4 3 88 ACWL MEDIUM 493 4 455 434 44 395 340 4 LOW 44 49 45 40 38 3 34 9 3 HIGH 590 59 548 53 55 48 4 45 ACWL4 MEDIUM 54 58 49 4 44 4 3 88 LOW 493 4 455 434 44 395 340 4 FAN PERFORMANCE DATA / 4 ROW COILS (METRIC UNITS) NUMBER BLOWER MOTOR SPEED LITERS PER SECOND @ EXTERNAL STATIC PRESSURE (Pascal) 0.0.5 5 3.5.5 5 00 5 HIGH 33 04 94 85 83 ACWL0 MEDIUM 9 3 05 9 8 8 8 0 LOW 0 9 9 85 8 35 - - HIGH 3 5 4 3 3 09 99 8 5 ACWL03 MEDIUM 53 4 35 3 99 - - LOW 40 34 4 3 0 90 45 - - HIGH 9 0 0 5 3 3 94 84 ACWL04 MEDIUM 3 5 4 3 3 09 99 45 - LOW 53 4 35 3 99 - - HIGH 99 83 3 43 0 0 5 5 95 ACWL0 MEDIUM 9 0 44 9 8 54 3 0 8 LOW 3 90 38 09 09 04 0 HIGH 349 330 30 8 4 0 00 9 35 ACWL08 MEDIUM 99 83 3 43 0 0 5 5 9 LOW 9 0 44 9 8 54 3 0 HIGH 493 4 455 434 44 395 3 30 4 ACWL0 MEDIUM 49 45 40 38 3 34 3 4 08 LOW 394 38 3 3 39 309 8 38 90 HIGH 58 49 4 44 4 394 38 53 ACWL MEDIUM 493 4 455 434 44 395 3 30 LOW 49 45 40 38 3 34 3 4 03 HIGH 59 548 53 55 48 49 44 430 ACWL4 MEDIUM 58 49 4 44 4 394 38 55 LOW 493 4 455 434 44 395 3 30 38 Note:. Values include losses for dry coil and filters.. Airflow values are in Liters per second. GE_ACWL_series.indd 3// : PM
SOUND POWER LEVEL (db re 0 - WATTS ) AT 0.5 ESP NUMBER BLOWER MOTOR SPEED OCTAVE BAND CENTER FREQUENCY - Hz 5 0 000 000 4000 8000 HIGH 58 53 49 4 45 40 33 ACWL0 MEDIUM 5 45 3 3 35 9 LOW 45 35 33 3 9 3 HIGH 0 55 48 4 4 35 ACWL03 MEDIUM 58 53 49 4 45 40 33 LOW 5 45 3 3 35 9 HIGH 3 5 54 49 43 3 ACWL04 MEDIUM 0 55 48 4 4 35 LOW 58 53 49 4 45 40 33 HIGH 8 5 53 54 49 4 ACWL0 MEDIUM 59 55 5 53 4 40 LOW 5 53 49 5 45 39 HIGH 9 3 0 5 5 5 45 ACWL08 MEDIUM 8 5 53 54 49 4 LOW 59 55 5 53 4 40 HIGH 0 8 5 4 0 54 ACWL0 MEDIUM 9 3 58 53 LOW 59 5 5 HIGH 9 5 4 5 ACWL MEDIUM 0 8 5 4 0 54 LOW 9 3 58 53 HIGH 3 58 ACWL4 MEDIUM 9 5 4 5 LOW 0 8 5 4 0 54 HOT WATER CAPACITIES NUMBER GPM (LPS) EWT - 0 F (5 0 C) CAPACITIES MBH (kw) GPM (LPS) EWT - 80 0 F (8 0 C) CAPACITIES MBH (kw) ACWL0 0.8 (0.043).9 (.0).05 (0.0) 0.5 (3.09) ACWL03 0. (0.04).3 (.3). (0.0).45 (3.35) ACWL04 0.5 (0.04).5 (.0).9 (0.05 ).9 (3.5 ) ACWL0.5 (0.0 ).3 (3.3).8 (0.3).4 (5.) ACWL08.3 (0.0).3 (3.0).0 (0.) 9.8 (5.8 ) ACWL0.83 (0.5) 8.3 (5.3) 3.0 (0.9) 8.9 (8.4) ACWL.9 (0.0 ) 9.0 (5.5) 3. (0.9 ) 30.4 (8.9 ) ACWL4.0 (0. ) 9.5 (5.) 3. (0.0) 3.5 (9.) NOTE: Capacities @ 0 0 F ( 0 C) Entering Air Temperature & 0 F ( 0 C) Water Temperature Drop and @high speed. LEGEND: EWT - Entering Water Temperature; MBH - 000 BTUH; GPM - Gallons Per Minute; LPS - Liters Per Second GE_ACWL_series.indd 3// : PM
DIMENSIONS / S: ACWL0 - ACWL4 A 09 (4.8) H D 4 J 5 (0.590) 3 B E 5 5 (.000) TOP VIEW 84 (.) END VIEW C G F FRONT VIEW LEGEND:. Blower & motor assembly. Cooling coil 3. Control box 4. Filter rack 5. Mounting holes. Drain pan. Duct connector DIMENSIONS A B C D E F G H J NO. OF MOTORS NO. OF BLOWERS ACWL0 (4.5) 59 (3.3) 54 (0) 59 (3.5) 8 (.3) 59 (0.8) (.93) (4.04 ) (8.33) ACWL03 (4.5) 59 (3.3) 54 (0) 59 (3.5) 8 (.3) 59 (0.8) (.93) (4.04 ) (8.33) ACWL04 (4.5) 59 (3.3) 54 (0) 59 (3.5) 8 (.3) 59 (0.8) (.93) (4.04 ) (8.33) ACWL0 09 (40.5) 59 (3.3) 54 (0) 99 (39.5) 8 (.3) 934 (3.8) (.93) 0 (40.04) (8.33) ACWL08 09 (40.5) 59 (3.3) 54 (0) 99 (39.5) 8 (.3) 934 (3.8) (.93) 0 (40.04) (8.33) ACWL0 359 (53.5) 5 (5.) 305 () 3 (5.5) 98 (.5) 5 (49.8) (8.93) 34 (53.04) (0.33) ACWL 359 (53.5) 5 (5.) 305 () 3 (5.5) 98 (.5) 5 (49.8) (8.93) 34 (53.04) (0.33) ACWL4 359 (53.5) 5 (5.) 305 () 3 (5.5) 98 (.5) 5 (49.8) (8.93) 34 (53.04) (0.33) NOTE: All dimensions are in mm (dimensions in brackets are in inches). 3 GE_ACWL_series.indd 3 3// : PM
DIMENSIONAL DATA / COIL CONNECTIONS CHILLED WATER COIL DIMENSIONS 3 ROW COIL 4 ROW COIL A B C A B C ACWL0 00 (3.9) 8 (4.3 ) 38 (.5) 90 (3.53) 8 (4.3 ) 5 (.5 ) ACWL03 00 (3.9) 8 (4.3 ) 38 (.5) 90 (3.53) 8 (4.3 ) 5 (.5 ) OUTLET ACWL04 00 (3.9) 8 (4.3 ) 38 (.5) 90 (3.53) 8 (4.3 ) 5 (.5 ) ACWL0 00 (3.9) 8 (4.3 ) 38 (.5) 90 (3.53) 8 (4.3 ) 5 (.5 ) C ACWL08 00 (3.9) 8 (4.3 ) 38 (.5) 90 (3.53) 8 (4.3 ) 5 (.5 ) ACWL0 00 (3.9 ) 43 (5. ) 38 (.5) 90 (3.53) 30 (5. ) 5 (.5 ) A 5 (.00") B INLET ACWL 00 (3.9 ) 43 (5. ) 38 (.5) 90 (3.53) 30 (5. ) 5 (.5 ) ACWL4 00 (3.9 ) 43 (5. ) 38 (.5) 90 (3.53) 30 (5. ) 5 (.5 ) NOTE: All dimensions are in mm (dimensions in brackets are in inches). HOT WATER COIL DIMENSIONS ACWL0 A 8 (.3) B 5 (.) C 4 (.3) D 90 (3.53) ACWL03 8 (.3) 5 (.) 4 (.3) 90 (3.53) ACWL04 8 (.3) 5 (.) 4 (.3) 90 (3.53) ACWL0 8 (.3) 5 (.) 4 (.3) 90 (3.53) OUTLET D B INLET 5 (.00") ACWL08 8 (.3) 5 (.) 4 (.3) 90 (3.53) ACWL0 9 (8.3) 5 (.) 4 (.3) 90 (3.53) ACWL 9 (8.3) 5 (.) 4 (.3) 90 (3.53) ACWL4 9 (8.3) 5 (.) 4 (.3) 90 (3.53) C A NOTE: All dimensions are in mm (dimensions in brackets are in inches). 4 GE_ACWL_series.indd 4 3// : PM
HEATER ARRANGEMENTS C HEATER BOX B SLIDING FRAME WITH HEATER A DIMENSIONS A B C ACWL 0/03/04 85 () 80 (. ) 3 (8.8 ) ACWL 0/08 939 (3) 80 (. ) 3 (8.8 ) ACWL 0//4 9 () 3 (9. ) (5.9) NOTE: All dimensions are in mm (dimensions in brackets are in inches). VALVE PACKAGES VALVE PACKAGE 3-D (for -pipe) Two gate shut off valves VALVE PACKAGE 4-D (for 4-pipe) Four gate shut off valves One balancing valv e Two balancing valves 3 One 3-way motor valv e 3 Two 3-way motor valves Two gate valves FCU 3 One balancing valv e CHILLER 3 One 3-way motor valv e 5 GE_ACWL_series.indd 5 3// : PM
TYPICAL SCHEMATIC WIRING DIAGRAM HEAT/COOL S - ELECTRIC HEATER TO FUSE DISCONNECT SWITCH HEATER OPTION LEGEND ATB AUXILIARY TERMINAL BLOCK HC TF TF 0HT HTR CA P C APACITO R EV ELECTRIC VALVE TG 0HT HTR FM FAN MOTO R TG GND LUG GROUND HC HEATER CONTACTOR GND L/L HVTB L/N HT R HVTB H EATER HIGH VOLTAGE TERMINAL BLOCK L/L LINE OR LINE L/N LINE OR NEUTRAL T'STAT N 0 ATB N 0 N 0 OHT _ O VER HEAT THERMOSTAT FIELD WIRING FACTORY WIRIN G Refer to table below for Speed Connections. SPEED WIRE COLOR ACWL 0 ACWL 03 ACWL 04 ACWL 0 ACWL 08 ACWL 0 ACWL ACWL 4 HI BLK MED-HI BLU MED RED LOW YEL LOWEST COM ORG WHT APPLICABLE FREQUENCY IN HERTZ NOTES:. Power supply, refer to unit nameplate.. Motors thermally protected. 3. HVTB is not required for heater models. 4. Use heater as per option required. If EV & heaters are factory installed, please read dashed line as continuous line. GE_ACWL_series.indd 3// : PM
TYPICAL SCHEMATIC WIRING DIAGRAM HEAT/COOL S - HOT WATER TO FUSE DISCONNECT SWITCH LEGEND ATB AUXILIARY TERMINAL BLOCK CA P C APACITOR EV ELECTRIC VALVE (COOLING ) GND L/L HVTB L/N EV E LECTRIC VALVE (HEATING ) FM FAN MOTO R GND LUG GROUND T'STAT N 0 ATB N 0 N 0 EV EV FM BRN CAP WHT COM HVTB HIGH VOLTAGE TERMINAL BLOCK L/L LINE OR LINE L/N LINE OR NEUTRAL _ FIELD WIRING FACTORY WIRIN G Refer to table below for Speed Connections. SPEED WIRE COLOR ACWL 0 ACWL 03 ACWL 04 ACWL 0 ACWL 08 ACWL 0 ACWL ACWL 4 FM SPEED CONNECTIONS HI MED-HI MED LOW LOWEST COM BLK BLU RED YEL ORG WHT APPLICABLE FREQUENCY IN HERTZ NOTES:. Power supply, refer to unit nameplate.. Motors thermally protected. 3. Use copper conductor wires only. 4. If EV & EV are factory installed, please read dashed line as continuous line. GE_ACWL_series.indd 3// : PM
INSTALLATION The complete shipment should be inspected for damage. Any damage, visible or concealed, should be reported immediately to the delivery man or driver and noted on the shipping invoice. Place unit in position and make sure that unit is level. This is important to assure proper drainage and operation. Slots provided in the mounting brackets should be used for installing the units. ELECTRICAL Please ensure power supply (V-Ph-Hz) to the unit is as per unit nameplate requirements. Caution: Operation of the unit on improper power supply will result in damage to the unit. Warning: Before installation or servicing, always TURN OFF all power to the unit. There may be more than one disconnect switch. Ensure all of them are turned off. GROUND & POWER WIRES Connect power wires as per wiring diagram. Connect ground wire to the ground lug inside the control box. MAINTENANCE COIL Coil may be cleaned by removing and brushing between fins with a stiff wire brush. Brushing should be followed by cleaning with vacuum cleaner. The coil may also be cleaned by using a high pressure air, if compressed air source is available. It should be pointed out that if air filters are used and periodically cleaned, the coils will not be clogged up prematurely. DRAIN PIPE Drain pipe should be checked before summer operation of unit. If it is clogged, steps should be taken to clear the debris so that condensate will flow out easily. A standard pipe cleaner for / ID pipe may be used. Periodic checks of the drain pipe should be taken during summer operation, as there is a possibility of it becoming clogged with dirt. FILTER CLEANING Remove access panel, slide filter out of filter rack, and clean as follows: Tap filter on solid surface to dislodge heavy particles. Wash under stream of hot water. If filter has been put to exceptional service, a mild solution of Sal-Soda, Tri-Sodium Phosphate or any other commercial solvent can be used. Set filter on end with slots in frame down, which allows it to drain. Filters should dry thoroughly before reuse. REPLACEMENT PARTS When writing for replacement parts, refer to model number and serial number on the nameplate of the unit. 8 GE_ACWL_series.indd 8 3// : PM
9 GE_ACWL_series.indd 9 3// : PM
Middle East Air Conditioners Co. Ltd. Middle East Air Conditioners Co. Ltd. P.O. Box 434 Dammam 344 KSA Kingdom of Saudi Arabia Tel: +9 3 84 88 Fax: +9 3 84 93 GE_ACWL_series.indd 0 3// : PM