TYPE: QUANTITY: PROJECT: / SERIES Post Top CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION 7 1 2 3 4 1- Cast aluminum LED heat sink. 2- Optical system assembly. 3- Set of two cast aluminum supporting struts. 4- Removable cast aluminum cover for easy access to electrical components and driver. 5- LED driver housing. 6- Lower cast aluminum housing to fit with 4 (102) or 5 (127) ).D pole. 6 (152) O.D available on request. 7-30 Diameter hard aluminum shade ( only). 5 6 MATERIALS MayaLED is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. COB LED is assembled on a thick pad housing chamber designed with a heat sink pattern to optimize heat dissipation and luminaire efficacy. The power supply is enclosed in an isolated chamber allowing a quick access for electrical maintenance without disturbing the optical light chamber. COB LED is protected from weather abrasion with an optical lens to ensure optimal lighting performance. COB LED is removable and replaceable for ease of maintenance or lighting upgrade. ELECTRICAL LED POWER SUPPLY Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277 multi-volt compatibility (50-60Hz), operating temperature range of -30ºC/-22ºF to 60ºC/140ºF, output over voltage protection, output over current protection and output short circuit protection with auto-recovery. LED Type II, III, IV or V light distribution via high performance optical lenses. Standard 4000K/80CRI. Optional 3500K and 5000K.. CERTIFICATION Tested to UL1598 and CSA22.2 #250. ETL listed for wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC/77ºF. Lumen depreciation in accordance with IESNA LM80 standards. CE Certification on request. Rated IP66. 30 (762) 27. (693) 17 (432) LIFE 100,000hrs (L 70 B 50 ) based on LM-80 report for lumen maintenance. FINISH Five-stage preparation process includes preheating of cast aluminum parts for air extraction. Polyester powder coating is applied through an electrostatic process, and oven cured for long term finish. Luminaire with shade. EPA: 1.10 Luminaire less shade. EPA: 0.93 MOUNTING Maximum weight: 26lbs (12kg) MayaLED is designed for ease of access and installation. Designed for wall or pole mount to fit with a 4 (102) or 5 (127) pole. 6 (152) available on request. Alternate poles or wall attachments are available to meet multiple installation conditions. (Refer to page 3).COM 1
/ SERIES LUMINAIRE SELECTION MODEL# LED LIGHT SELECTION VOLTAGE 1 FINISH INPUT DELIVERED WATTS LUMENS MODEL STANDARD COLORS Type II Type III Type IV Type V 34W 4170 -R2-L1W30r1 -R2-L1W30r1 69W 7994 -R2-L2W30r1 -R2-L2W30r1 112W 11029 -R2-L3W30r1 -R2-L3W30r1 138W 13284 -R2-L3W46r0 -R2-L3W46r0 38W 4395 -R3-L1W30r1 -R3-L1W30r1 76W 8697 -R3-L2W30r1 -R3-L2W30r1 111W 11177 -R3-L3W30r1 -R3-L3W30r1 135W 12697 -R3-L3W46r0 -R3-L3W46r0 38W 4493 -R4-L1W30r1 -R4-L1W30r1 75W 8482 -R4-L2W30r1 -R4-L2W30r1 111W 11105 -R4-L3W30r1 -R4-L3W30r1 135W 12378 -R4-L3W46r0 -R4-L3W46r0 36W 4243 -R5-L1W30r1 -R5-L1W30r1 69W 7937 -R5-L2W30r1 -R5-L2W30r1 113W 11274 -R5-L3W30r1 -R5-L3W30r1 139W 12639 -R5-L3W46r0 -R5-L3W46r0 120V 277V Optional 347V 480V WHT Snow white BKT Jet black BZT Bronze MST Matte silver GRT Titanium gray DGT Gun metal CHT Champagne SGT Steel Gray OPTIONAL COLORS CS Custom color RAL RAL# color (Refer to color chart) NOTE: Above wattage values are based on 277V, tested at 25ºC/ 77ºF ambient temperature. Wattage may vary by approx. +/- 10% for other voltages, or due to changes in ambient temperature. Lumen output will remain constant. OPTIONS ELECTRICAL PH Photocell 2 FS Fuse 2 SP Surge protector 10KV K2A Amber LED for turtle sensitive areas Wavelengths: 584.5 nm to 597 nm K35 3500K CCT LED. 80 CRI (Multiplier 0.98) K5 5000K CCT LED. 80 CRI (Multiplier 1.01) MOUNTING ACA Pole mount attachment with 45º support ACW Wall mount attachment with 45º support EC3P Pole mounted attachment with stacked arm EC3PS Pole mounted attachment with short stacked arm ( only) EC3W Wall mount attachment with stacked arm EC3WS Wall mount attachment with short stacked arm ( only) TN3 Tenon pole adaptor 3 ACCESSORIES BLC Back light control NOTES 1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires. (Except for other types of mounting.) 3- tenon pole adaptor only required for O.D. poles by others..com 2
SERIES POLE MOUNT 28 (711) 18 (457) 30 (762) 17.75 (451) 34 (864) ACA 1 1 X (25X76) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5 dia. poles. 1/2 dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) EC3P (Applicable for and ) side pole straight mounting. Pole mounting adaptor fits with 4 to 5 dia. poles. (EPA: 0.97) EC3PS (Applicable for only) side pole straight mounting. Pole mounting adaptor fits with 4 to 5 dia. poles. (EPA: 0.72) NOTE 1: PST Pole with ACA attachment requires a 30 (762) tenon extension over pole nominal height. EC3P and EC3PS require an 18 tenon extension. Factory installed. MATCHING POLE SELECTION POLE MOUNTINGS Ø 4 Ø 5 Ø 4 Tapered Ø 4 Height Pole PAA410 PAA510 PST10 ------- PSB10 10 Ft. (3 M) PAA412 PAA512 PST12 ------- PSB12 12 Ft. (3,6 M) PAA414 PAA514 PST14 ------- PSB14 14 Ft. (4,2 M) PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) PAA418 PAA518 ------- PTA18 PSB18 18 Ft. (5,5 M) PAA420 PAA520 ------- PTA20 PSB20 20 Ft. (6,0 M) ------- ------- ------- PTA25 ------- 25 Ft. (7,6 M) For additional pole details, please refer to separate pole specification sheet. Ø 4 = 102mm Ø5 = 127mm PSB PST PAA PTA.COM 3
/ SERIES WALL MOUNT 28 (711) 18 (457) 11 (279) 34 (864) ACW 1 X (25X76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2 dia. X 45º standard natural stainless steel rod support. EC3W (Applicable for and ) wall mount arms with cast aluminum wall plate. EC3WS (Applicable for only) wall mount arms with cast aluminum wall plate. Mounting Mounting Mounting 6. 1 2 5 (156) 6. 1 2 5 (156) 17.75 (451).COM 4
/ SERIES TYPICAL PHOTOMETRY SUMMARY TYPE II -R2-L1W30r1 -R2-L1W30r1 -R2-L2W30r1 -R2-L2W30r1 -R2-L3W30r1 -R2-L3W30r1 -R2-L3W46r0 -R2-L3W46r0 Total Lumens: 4170 Lms Total Input Watts: 34.33W Efficacy: 121.47 Lms/W BUG Rating: B2-U0-G2 2312 @ 85ºH/67.5ºV Total Lumens: 7994 Lms Total Input Watts: 68.66W Efficacy: 116.43 Lms/W 5935 @ 77.5ºH/67.5ºV Total Lumens: 11029 Lms Total Input Watts: 111.74W Efficacy: 98.7 Lms/W 8023 @ 72.5ºH/67.5ºV Total Lumens: 13284 Lms Total Input Watts: 138.42W Efficacy: 95.97 Lms/W 9964 @ 70ºH/67.5ºV TYPE III -R3-L1W30r1 -R3-L1W30r1 -R3-L2W30r1 -R3-L2W30r1 -R3-L3W30r1 -R3-L3W30r1 -R3-L3W46r0 -R3-L3W46r0 Total Lumens: 4395 Lms Total Input Watts: 38.3W Efficacy: 114.75 Lms/W BUG Rating: B2-U0-G2 2718 @ 65ºH/70ºV Total Lumens: 8697 Lms Total Input Watts: 75.59W Efficacy: 115.05 Lms/W 4515 @ 90ºH/60ºV Total Lumens: 11177 Lms Total Input Watts: 110.83W Efficacy: 100.85 Lms/W 6515 @ 60ºH/67.5ºV Total Lumens: 12697 Lms Total Input Watts: 135.09W Efficacy: 93.99 Lms/W 7364 @ 60ºH/67.5ºV TYPE IV -R4-L1W30r1 -R4-L1W30r1 -R4-L2W30r1 -R4-L2W30r1 -R4-L3W30r1 -R4-L3W30r1 -R4-L3W46r0 -R4-L3W46r0 Total Lumens: 4493 Lms Total Input Watts: 38.25W Efficacy: 117.46 Lms/W BUG Rating: B2-U1-G1 2740 @ 65ºH/70ºV Total Lumens: 8482 Lms Total Input Watts: 75.21W Efficacy: 112.78 Lms/W BUG Rating: B2-U1-G2 4829 @ 57.5ºH/67.5ºV Total Lumens: 11105 Lms Total Input Watts: 111.47W Efficacy: 99.62 Lms/W BUG Rating: B3-U1-G3 6632 @ 67.5ºH/70ºV Total Lumens: 12378Lms Total Input Watts: 135.24W Efficacy: 91.53 Lms/W BUG Rating: B3-U1-G3 7186 @ 67.5ºH/67.5ºV TYPE V -R5-L1W30r1 -R5-L1W30r1 -R5-L2W30r1 -R5-L2W30r1 -R5-L3W30r1 -R5-L3W30r1 -R5-L3W46r0 -R5-L3W46r0 Total Lumens: 4243 Lms Total Input Watts: 35.71W Efficacy: 118.82 Lms/W BUG Rating: B3-U0-G1 1684 @ 67.5ºV Total Lumens: 7937 Lms Total Input Watts: 68.67W Efficacy: 115.58 Lms/W BUG Rating: B3-U0-G2 3221 @ 65ºV Total Lumens: 11274 Lms Total Input Watts: 113.27W Efficacy: 99.53 Lms/W BUG Rating: B4-U0-G2 4835 @ 62.5ºV Total Lumens: 12639Lms Total Input Watts: 138.6W Efficacy: 91.19 Lms/W BUG Rating: B4-U0-G2 5571 @ 67.5ºV Please visit our web site www.luminis.com for complete I.E.S formatted download data. All published photometric data are executed and certified by an independent testing laboratory..com 5