Knott - Brake shoes Brake assemblies Rods, cables & adjusters Contents Knott brakes 00x0 ("), brake assemblies, spare shoes, springs and spares Knott brakes 0x0 (0"), brake assemblies, spare shoes, springs and spares Bowden cables, brake rods, compensators and spherical adjusting nuts 0 Al-Ko (all sizes), brake assemblies, spare shoes, springs and spares
00 x 0 BRAKE ASSEMBLY ( ) Knott To Order See pages & for distributor contact details or call direct on 0 0 0 0 P0000 Brake assembly. 00 x 0 RH & LH - Bolt on type backplates pre-assembled with shoes, springs etc (From Jan ).. F00 Setscrew M. Fixes 00 x 0 backplate to axle stub ( per side). 0. P000 Steady spring. 00 x 0 brake, holds the shoe against the backplate (fixed shoe only). 0.0 P0000 Brake spring. 00 x 0 brake, fits between shoes at adjuster end (mm long). 0.0 P000 Brake spring. Fits between the shoes at the expander end (mm long)..0 P000 Carrier spring. Holds the sliding shoe onto the carrier ( off per wheel)..00 P000 Re-adjustment Wedge. Fitted immediately behind the adjuster bolt this acts on the adjuster posts to adjust the brakes.0 P000 Adjuster post. 00 x 0 brake, fitted each side of the adjuster screw ( required per brake).. P000 Eyelet. Connects the brake cable to the expander assembly.. P000 Expander. Fits between the brake shoes (same expander for left or right).. P000 Half shell. Shell for cable entry to backplate.. P000 Inspection plug. 00 x 0 - covers the hole that allows brake lining inspection. 0. P0000 Adjuster Bolt. M0 0mm long hexagonal headed High Tensile bolt. 0. B0 Safety Kit. Gloves, safety goggles, pair of dust masks, illustration) 0.0 P0000 Brake shoe set. 00 x 0 ( ). A full set comprising two fixed and two sliding brake shoes, auto-reverse sliding shoe carrier and all springs required to complete the installation. 0
Knott 0 x 0 BRAKE ASSEMBLY (0 ) 0 P0000 Brake assembly. 0 x 0 RH & LH - Bolt on type backplates pre-assembled with shoes, springs etc (From Jan ).. F0 Setscrew M. Cap head screw for fixing the brake backplate to the stub axle. 0.0 P000 Steady spring. 0 x 0 brake, holds the shoe against the backplate (fixed shoe only). 0.0 P000 Brake spring. For 0 x 0 brake fits between shoes at expander end. Silver coloured spring..0 P000 Brake spring. For 0 x 0 brake fits between shoes at adjuster end. Black coloured spring..0 P000 Carrier spring. Holds the sliding shoe onto the carrier ( off per wheel)..00 P000 Re-adjustment wedge. Fitted immediately behind the adjuster bolt this acts on the wedges to adjust the shoes.. P000 Adjuster post. 0 x 0 brake, fitted each side of the adjuster screw ( required per brake).. P000 Eyelet. Connects the brake cable to the expander assembly.. P000 Expander. Fits between the brake shoes (same expander for left or right).. P000 Half shell. Shell for cable entry to backplate.. P000 Inspection plug. 0 x 0 - covers the hole that allows brake lining inspection. 0. P000 Adjuster Bolt. M 0mm long hexagonal headed High Tensile bolt..0 B0 Safety Kit. Gloves, safety goggles, pair of dust masks, illustration) 0.0 P0000 Brake shoe set. 0 x 0 (0 ). A full set comprising two fixed and two sliding brake shoes, auto-reverse sliding shoe carrier and all springs required to complete the installation. 0 To Order See pages & for distributor contact details or call direct on 0 0 0
0 If you are not sure of your cable size, give us a call with the serial number - we can help! Bowden Cables To Order See pages & for distributor contact details or call direct on 0 0 0 TYPE CABLE With small cast end fitting for Al-Ko brakes Inner Outer P00 Brake cable. Type end fitting. 00 000.0 P00 Brake cable. Type end fitting. 00 00.0 P0 Brake cable. Type end fitting. 00 00.0 P00 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 00.0 TYPE CABLE With mm tubular end fitting for Knott brakes P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 00 0.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 0.0 TYPE CABLE With mm tubular end fitting for Knott brakes P00 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 00.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 00 0.0 P0 Brake cable. Type end fitting. 000 0.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 0.0 P0 Brake cable. Type end fitting. 0 0.0 C00 Balance bar. Simple compensator used on single axle trailers.. C000 Compensator beam. Used on twin axle trailers (requires two rockers to complete)..0 C0 Rocker. Two of these are fitted to the compensator beam on twin axle.. F00Z M0 Spherical seat nut. M0 used at the compensator end of the brake rod. 0.0 F0Z M Spherical nut. M used at the compensator end of the brake cables. 0.0 MAIN BRAKE RODS P000 Brake rod. 0mm.00 P000 Brake rod. mm.00 P000 Brake rod. 0mm.00 P000 Brake rod. 0mm.00 P000 Brake rod. 00mm.00 P000 Brake rod. 0mm.00 P00 Brake rod. 00mm.00 P00 Brake rod. 0mm.00 P00 Brake rod. mm.00 P00 Brake rod. 0mm.00 P00 Brake rod. 0mm.00 P00 Brake rod. mm.00 P00 Brake rod. 00mm.00 P00 Brake rod. mm.00 P00 Brake rod. 0mm.00 P000 Brake rod. 0mm.00 P00 Brake rod. 0mm.00 P00 Brake rod. mm.00 P00 Brake rod. 0mm.00 P00 Brake rod. 00mm.00 P00 Brake rod. mm.00 P000 Brake rod. mm.00 TO ENSURE SMOOTH OPERATION OF THE BRAKES AND TO REDUCE THE POSSIBILITY OF PREMATURE BRAKE WEAR, IT IS RECOMMENDED THAT THE BRAKE CABLES ARE INSPECTED EVERY 000 MILES OR MONTHS (THIS COULD BE DONE AT THE SAME TIME AS THE BRAKES ARE CHECKED). mm mm
& Brake Parts Al-Ko & Compatible Parts Al-ko brakes were fitted to all models before September These trailers have black hub-caps with the Ifor Williams factory address and 00 phone number but no logo. 0 Parts for trailers originally fitted with Al-Ko brakes P0000 Complete 00 brake assembly (Axle Set). Pre-fitted to backplate and complete with all springs, adjusters etc... 0. 0 P00 Brake spring. -/ spring fits between brake shoes..0 P00 Cover plate. Used to hold pressure spring (P00) onto backplate. ( per brake). 0. P00 Steady spring. Holds the shoe to the backplate ( per brake). 0. P00 Brake spring. -/ spring fits between brake backplate and transmission lever..0 P00 Expanding clutch. For both types of Al-ko brakes replaces older type, however new type brake shoes must be fitted..0 P00 Adjuster. Adjuster Screw and nut for Al-Ko type brakes.. P00 Cover cap. Covers the hole used to access the brake adjuster. 0. P00 Half shell. Shell for cable entry on Al-Ko backplates P00 & P00..0 B0 Safety Kit. Gloves, safety goggles, pair of dust masks, illustration) 0.0 P000 Complete 0 brake assembly (Axle Set). Pre-fitted to backplate and complete with all springs, adjusters etc... 0. P000 Brake shoe set. 0 brake (will also fit 00 brake)..0 A full set comprising of four brake shoes and all springs required to complete the installation. To Order See pages & for distributor contact details or call direct on 0 0 0