SPARE PARTS 00
We make life easier for users through the constant development of better systems with high operational reliability and long service life. Couplings, manual, automatic and power-assisted, for steering axle and centre axle trailers of all weight classes. Underride protection, drawbars, drawbeams and other accessories. Our products undergo several stages of corrosion protection treatment. All meet the national and international standards for their respective markets. Spare parts Coupling equipment '0 VBG GROUP TRUCK EQUIPMENT AB Edition l, 00-0-0 The contents in this publication may not be reproduced either in full, or in part, without the prior approval of VBG GROUP TRUCK EQUIPMENT AB in writing. This prohibition is applicable for all forms of reproductions in all types of media, including electronic media. Graphic design Isabell Bergman VBG GROUP TRUCK EQUIPMENT AB reserve the right to amend or alter speci cations at their discretion.
Contents COUPLINGS VBG 0V/V/VR... VBG 0... VBG 0D... VBG V/0V/0VR... VBG 0D... VBG 00... VBG 00...0 VBG 000... VBG 0///000... VBG 00... VBG 00... VBG MFC... SERVICE TOOLS... POWER ACTUATORS Power actuator version.0... Power actuator version.0...0 Power actuator version.0... UNDERRUN PROTECTION... D RAWBARS Multi XF Drawbar D:0// kn... Optimal Drawbar... Automatic drawbar... Multi drawbar D:0/ kn... Multi drawbar D: kn... Attachment parts...0 D RAWBAR EYES... POWER PLUGS Power plug /... Power plug / ADR...
VBG 0V/V/VR VBG 0V/V VBG VR b a b b a a a a b a b a a b*,c* a 0 * Use locking pin kit 0-00 for mechanisms with part numbers 0-0, 0- and 0-. Use locking pin kit 0-00 for mechanisms with part numbers 0-000, 0-00 and 0-00. a,b c b 0a,b a,b b b a 0-000 Nut cover, incl. split pin 0V/V b 0-00 Nut cover, incl. split pin VR -000 Castellated nut a -000 Bearing plate, inner b 0-00 Bearing box kit VR, inner 0-000 Bolt kit a 0-000 Rubber bearing kit 0V/V, incl pos a b 0-00 Rubber bearing kit VR, incl pos b a 0-000 Drawbeam sleeve VBG V incl pos, a b 0-000 Drawbeam sleeve VBG 0V incl pos, a c 0-00 Drawbeam sleeve VBG VR incl pos, b a -000 Bearing plate, outer 0V/V b 0-00 Bearing plate, outer VR 0-000 Bushing a -00000 Bar spacer washer mm kit b -000 Bar spacer washer 0 mm 0 0-00 Bolt kit for mechanism cover 0-00 Handle left a 0-00 Signal pin kit b* 0-00 Indicator & locking device c* 0-00 Indicator & locking device 0-00 Mechanism cover complete kit 0-000 Bolt kit a 0-00 Grease plug, 0-pack b 0-000 Grease plug, -pack 0-000 Mechanism incl Pos,, (x) 0-00 Plastic plug a 0-000 Guiding funnel V/VR b 0-000 Guiding funnel 0V 0-000 Wear plate ( kit used for 0V and kits for V/VR) 0a 0-000 Coupling jaw V/VR incl pos,, a 0b 0-0000 Coupling jaw 0V incl pos,, b 0-00 Cap 0-00 Handle right 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-00 Closing spring kit 0-00 Sealing kit, cover 0-000 Protective insert 0-00 Conversion kit.0, pos and pos p. 0-000 Conversion kit.0, pos and pos p., incl Sensor compl pos p. 0-00 Renovation 0V/V, pos a, and pos p. 0-00 Renovation 0V/V incl Sensor compl (pos p. )
VBG 0 b b*,c* a a,b 0 0 *Use locking pin kit 0-00 for mechanisms with part numbers 0-, 0- and 0-. Use locking pin kit 0-00 for mechanisms with part numbers 0-, 0- and 0-. -00000 Nut cover -00000 Castellated nut incl. Pos b b 0-000 Lock kit, castle nut -000 Washer mm -000 Washer -0000 Bearing plate kit -0000 Rubber block kit incl. Pos b -000 Beam plates incl. screw 0-00 Handle left a 0-00 Signal pin kit b* 0-00 Indicator & locking device c* 0-00 Indicator & locking device 0 0-00 Plastic plug 0-000 Mechanism VBG 0 incl. Pos, a 0-00 Grease plug, 0-pack b 0-000 Grease plug, -pack 0-00 Screw kit 0-00 Mechanism cover kit 0-00 Screw kit for mechanism cover -00000 Bushing kit VBG 0 0-000 Coupling jaw VBG 0 incl. castellated nut and Pos., 0-00 Cap 0-00 Handle right 0 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-00 Closing spring kit 0-00 Sealing kit, cover 0-000 Conversion kit.0, pos and pos p. 0-000 Conversion kit.0, pos and pos p. incl Sensor complete (pos p. )
VBG 0D a b b*,c* a a,b 0 a 0 *Use locking pin kit 0-00 for mechanisms with part numbers 0-0, 0- and 0-. Use locking pin kit 0-00 for mechanisms with part numbers 0-000, 0-00 and 0-00. 0 0-00 Cotter -000 Castellated nut -000 Bearing box a, b 0-00 Rubber element insert 0-000 Drawbeam sleeve, incl. pos. b 0-00 Bolt kit 0-000 Coupling jaw 0-000 Bushing kit 0-000 Coupling mouth 0 0-000 Wear plate kit, kits used 0-000 Mechanism incl. pos.,, 0 (x) 0-000 Screw kit 0-00 Mechanism cover complete kit a 0-00 Grease plug, 0-pack b 0-000 Grease plug, -pack a 0-00 Signal pin kit b* 0-00 Signal and lock pin kit c* 0-00 Signal and lock pin kit 0-00 Plastic plug 0-00 Screw kit for mechanism cover 0-00 Handle, left 0-00 Plastic knob 0 0-00 Handle, right 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-00 Closing spring kit 0-00 Sealing kit, cover
VBG V/0V/0VR VBG V/0V a a a a b a,b VBG 0VR b a a a b*,c* 0 b, b c a,b c 0 d b c *Use locking pin kit 0-00 for mechanisms with part numbers 0- and 0-. Use locking pin kit 0-00 for mechanisms with part numbers 0-, 0- and 0-. a 0-000 Nut cover and split pin V/0V b 0-00 Nut cover and split pin 0VR -000 Castellated nut a -000 Bearing plate V/0V, inner b 0-00 Bearing plate kit 0VR, inner 0-000 Bolt kit a, b 0-000 Rubber bearing kit V/0V, incl. Pos c, d 0-00 Rubber bearing kit 0VR, incl. Pos a 0-000 Drawbeam sleeve VBG 0V inkl pos b b 0-000 Drawbeam sleeve VBG V incl. Pos b c 0-00 Drawbeam sleeve VBG 0VR incl. Pos, d a -000 Bearing plate V/0V, outer b 0-00 Bearing plate 0VR, outer 0-00 Bushing kit 0-00 Bolt kit for mechanism cover 0 0-00 Handle left a 0-00 Signal pin kit b* 0-00 Indicator & locking device c* 0-00 Indicator & locking device 0-00 Mechanism cover complete kit 0-000 Bolt kit a 0-00 Grease plug, 0-pack b 0-000 Grease plug, -pack 0-000 Cover kit 0-000 Mechnism incl Pos,,, 0-00 Plastic plug -000 Torsion spring a 0-00 Guiding funnel version.0 b 0-00 Guiding funnel version.0 0 0-00 Wear plate holder kit 0-00 Wear plate kit incl Pos 0 0-00 Cap 0-00 Handle right 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-00 Closing spring kit 0-00 Sealing kit, cover 0-00 Conversion kit.0, pos, a, (p. ) 0-00 Conversion kit.0, pos, a, (p. ) incl Bracket kit pos c p.
VBG 0D b a b a,b 0 0 VBG -00000 Nut cap -00000 Castellated nut incl. pos. b b 0-000 Lock kit castellated nut -000 Washer mm -000 Nut washer -0000 Bearing box kit -0000 Rubber element kit incl. pos. b -000 Beam washers incl. screw 0-00 Handle, left a 0-00 Signal pin kit b 0-00 Signal and lock pin kit 0 0-00 Plastic plugs 0-00 Mechanism VBG 0D incl. pos., a 0-00 Grease plugs, 0-pack b 0-000 Grease plugs, -pack 0-00 Screw kit 0-00 Mechanism cover, kit 0-00 Screw kit for mechanism cover 0-00 Bushing kit VBG 0D 0-00 Clamp VBG 0D incl. castellated nut and pos., 0-00 Plastic knob 0-00 Handle, right 0 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-00 Closing spring kit 0-00 Sealing kit, cover
VBG 00 b a b*,c* a,b 0 0, *Use locking pin kit 0-00 for mechanisms with part numbers 0- and 0-. Use locking pin kit 0-00 for mechanisms with part numbers 0-, 0- and 0-. -00000 Nut cover -00000 Castellated nut incl. Pos b b 0-000 Lock kit, castle nut -000 Washer mm -000 Washer -0000 Bearing plate kit -0000 Rubber block kit incl. Pos b -000 Beam plates incl. screw 0-00 Handle left a 0-00 Signal pin kit b* 0-00 Indicator & locking device c * 0-00 Indicator & locking device 0 0-00 Plastic plug 0-00 Mechanism VBG 00 incl. Pos, a 0-00 Grease plug,0-pack b 0-000 Grease plug, -pack 0-00 Bolt kit 0-00 Mechanism cover kit 0-00 Bolt kit for mechanism cover -0000 Bushing kit VBG 0/ -00000 Bushing kit VBG 00 0-000 Coupling jaw VBG 00 incl. castellated nut and Pos., 0-00 Cap 0 0-00 Handle right 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-00 Closing spring kit 0-00 Sealing kit, cover 0-00 Conversion kit.0, pos and pos (p. ) 0-00 Conversion kit.0, pos and pos (p. ), incl Sensor complete (pos p. )
a,b 0 b a b*,c* 0 *Use locking pin kit 0-00 for mechanisms with part numbers 0- and 0-. Use locking pin kit 0-00 for mechanisms with part numbers 0- and 0-. a,b -00000 Nut cover -00000 Castellated nut incl. Pos b b 0-000 Lock kit, castle nut -000 Washer mm -000 Washer -0000 Bearing plate kit -0000 Rubber block kit incl. Pos b -000 Beam plates incl. screw 0-00 Handle left a 0-00 Signal pin kit b* 0-00 Indicator & locking device c* 0-00 Indicator & locking device 0 0-00 Plastic plug 0-000 Mechanism VBG 00 incl. Pos, a 0-00 Grease plug, 0-pack b 0-000 Grease plug, -pack 0-00 Bolt kit 0-00 Mechanism cover kit -0000 Bushing kit a 0-000 Coupling jaw G0 incl. castellated nut and Pos and. b 0-000 Coupling jaw G0 incl. castellated nut and Pos and. 0-00 Bolt kit for mechanism cover -0000 Bracket 0-00 Cap 0 0-00 Handle right 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-00 Closing spring kit 0-00 Sealing kit, cover 0-00 Conversion kit.0, pos and pos (p. ) 0-00 Conversion kit.0, pos, and pos (p. ) incl Sensor complete (pos sid ) 0
0 b,, 0, 0,,,,, 0, 0,, -00000 Nut cover -00000 Castellated nut incl. Pos b b 0-000 Lock kit, castle nut -0000 Bearing plate, inner 0-000 Rubber bearing kit 0-000 Drawbeam sleeve incl. bushing -00000 Bearing plate, outer -0000 Rubber damper kit -000 Jack-kni ng stop incl. Rubber damper 0-000 Bolt kit, Drawbeam sleeve 0 0-000 Nipple kit, torsion device (Ø, Ø ) 0-000 Membrane kit 0-000 Clamp ring kit -000 Manual indicator and locking device 0-0000 Air Cover pin 0-0000 Protective plate incl. screw 0-000 Cover 0-000 Piston rod kit -0000 Screw kit MCS x0 0-000 Mechanism incl. bushings 0 0-000 Coupling jaw with bushings -00000 Bushing kit 0-00000 Renovation kit -000 Compression spring 0-000 Protective Insert -00000 Repair kit for release arm
VBG 0///000 a a b a b*,c* a,b a VBG 000 b a c a b a b 0 0 *Use locking pin kit 0-00 for mechanisms with part numbers 0-. Use locking pin kit 0-00 for mechanisms with part numbers 0-. a,b b a -00000 Nut cover 0// b -0000 Nut cover 000 a -00000 Castellated nut 0// incl. Pos b c -0000 Castellated nut 000 b 0-000 Lock kit, castle nut -0000 Bearing plate, inner 0-000 Rubber bearing kit a 0-000 Drawbeam sleeve 0//, incl. Pos. b ** Drawbeam sleeve 000 a 0-000 Bolt kit 0// b -0000 Bolt kit 000-00000 Bearing plate, outer -000 Jack-kni ng stop, incl. Pos -0000 Rubber damper kit 0 0-000 Mechanism VBG 0///000 incl. Pos, 0-00 Mechanism cover kit a 0-00 Grease plug,0-pack b 0-000 Grease plug, -pack 0-00 Bolt kit -00000 Bushing kit a ** Coupling jaw VBG 0// b ** Coupling jaw 000 0-000 Protective Insert 0-00 Bolt kit for mechanism cover 0-00 Handle left a 0-00 Signal pin kit b* 0-00 Indicator & locking device c* 0-00 Indicator & locking device 0 0-00 Plastic plug 0-00 Cap -00000 Jackknife alarm kit -0000 Washer 0-00 Closing spring kit 0-00 Sealing kit, cover 0-00 Handle right 0-00 Sleeve kit for handle mm (for moving handle from left to right side) 0-000 Conversion kit.0, pos 0 ( p. ) 0-000 Conversion kit.0, pos 0 ( p. ) incl Position sensor (pos p. ) * * Not available as spare part.
VBG 00 0 a,b * Nut cover * Split pin -0000 Castellated nut " * Steering block * Coupling jaw incl. steering blocks, nut 0-000 Lower lip bushing -0000 Bolt kit for mechanism a 0-000 Mechanism incl. bushing b 0-000 Mechanism incl. bushing and signal and lock pin c 0-0000 Signal and lock pin 0-000 Plastic plug 0-00000 Handle incl. Pos. * Not available as spare part.
VBG 00 b a a a 0 b a a a a b a a a a 0 a a -00000 Nut cover a -00000 Castellated nut incl. Pos b b 0-000 Lock kit, castle nut a -0000 Bearing plate 00, inner a,b 0-000 Rubber bearing kit 00 a 0-000 Bolt kit 00 a 0-000 Drawbeam sleeve 00 incl. Pos a -00000 Bearing plate 00, outer -000 Earth strip 00-0000 Handle incl. split pin 0-0000 Bolt kit for Mechanism -0000 Plastic cap a 0-000 Mechanism 00 incl. Pos. a a -000 Locking device 00 a -0000 Bushing kit 00 a -0000 Lock bolt repair kit 00-0000 Spring bracket 00-0000 Torsion spring 00 0 0-0000 Guiding funnel 00
VBG MFC x x x x x * Coupling, complete 0-0000 Bolt kit 0-000 Lock cylinder, kit 0-000 Magnetic sensor 0-000 Inductive sensor 0-000 USS kit truck, incl. pos page 0-000 Control panel 0-000 Panel cylinder kit 0-0000 Panel kit
VBG MFC 0-000 Valvebox 0-000 USS kit truck, incl. pos page 0-00000 Locking key kit 0-000 Locking key cylinder kit 0-0000 Power-air unit 0-000 Magnetic sensor 0-000 Power switch, kit truck
VBG MFC * Drawbar head, complete 0-0000 Tow fork 0-0000 Renovation kit, ball 0-000 USS kit trailer 0-0000 Air and electrical connection kit 0-0000 Power switch, kit trailer 0-000 Brake line kit 0-0000 Hook spanner
Service tools 0-000 -000-0000 -0000-0000 -0000-0000 -0000-0000 -000-000 -000-0000 -0000-0000 -0000 Hydraulic cylinder -0000 Threaded rod M -0000 Nut M -0000 Guide sleeve -0000 Guide plate -0000 Spacer tube -0000 Guide sleeve -0000 Guide plate -0000 Guide plate 0-0000 Guide plate -000 Guide plate -000 Guide plate -000 Counterbalance clamp -000 Counterbalance plate -000 USB memory stick
Power actuator version.0 RB,,* * Type plate on the mechanism is marked with manufacture year and week yy/ww. For mechanisms produced before 00/0, use bracket or. VBG V VBG 0V 0 VBG 00 VBG 0 The items in bold refer to Version.0 spare parts that have been replaced with Version.0 spare parts. 0-000 Adapter kit for drawbar eye 0 0-000 Adapter kit 0-000 Bolt kit for bracket 0-000 Bracket RB 0-000 Adapter kit 0-000 Bolt kit for bracket 0-000 Bolt kit 0-000 Bracket R 0-000 Bracket L 0-000 Bolt kit 0-000 Actuator 0-000 Nipple kit for actuator 0-000 Bolt kit 0-000 Nipple kit for actuator 0-000 Snap-on connector 0-0000 Control box 0-000 Nipple kit for actuator 0 0-000 Nipple kit 0-000 Bolt kit 0-000 Adapter kit 0-000 Bracket 0-0000 Adapter kit 0-000 Washer 0-000 Bracket
Power actuator version.0 VBG 00 RB VBG 00/0 VBG 0 RB VBG 0 RB VBG RB VBG RB VBG 0V VBG V VBG 000 RB,0 0 a,b 0-000 Adapter 0-000 Bolt kit for bracket 0-000 Bracket for actuator 0-000 Bolt kit 0-000 Actuator 0-000 Nipple kit for actuator (Ø, Ø ) 0-000 Control box, complete 0-000 Handle 0-000 Handle 0 0-000 Control box (without valve) 0-000 Bracket control box 0-000 Nipple kit for control box 0-000 Remote indicator kit 0-000 Bolt kit VBG V/0V 0-000 Adapter VBG V/0V 0-000 Bracket VBG V/0V 0-000 Plastic cap 0-000 Indicating kit 0-000 Indicating panel incl. cable and nuts 0 0-000 Electronic unit 0-000 Connector with clip a 0-000 Cable 0 m b 0-000 Cable m 0
Power actuator version.0 a b 0 0 a a b b 0 a,b c 0 0-000 Handle 0-000 Handle 0-000 Valve box without valve 0-000 Valve box, complete 0-0000 Valve box complete, incl. bracket kit 0-000 Bracket 0-000 Nipple kit 0-000 Plug 0-000 Snap-lock 0 0-000 Torsion device kit a 0-00 Bracket kit 0V/V/ VR/0/00/00 b 0-00 Bracket kit V/0V/0VR a 0-00 Screw kit for bracket a b 0-00 Screw kit for bracket b 0-000 Screw kit for torsion device a 0- Bracket 0V/V/VR/0/00/00 b 0-0 Bracket V/0V/0VR 0-00 Adapter kit 0-000 Indicating kit 0-00 Cabling, m 0-00 Screw kit for mechanism cover 0-000 AM unit, incl. pos. 0 0 0-00 Shaft for AM unit incl. plastic plug (x), pos. 0-00 Plastic plug for shaft, 0-pack 0-000 Diaphram kit 0-000 Plug for valve box 0-000 Cover AM a 0- Protective bracket kit for 0V/V AM, 0 AM, 00 AM b 0- Protective bracket kit for 00 AM c 0- Protective bracket V AM 0-00 Position sensor, complete kit 0-000 Locking key, 0-pack 0-000 Jackknife alarm kit, buzzer included in pos. 0-000 Electronic unit 0 0-000 Connector with clip 0-000 Indicating panel incl. cable and nuts
Underrun protection -000 Bolt kit for steel beam incl. end stop -0000 End stop for steel beam -0000 End stop for aluminium beam -0000 End stop for aluminium beam UHAP.0, kit -00 End stop for aluminium beam UHAP.0-00 End stop for round steel beam
Underrun protection -0 Endplate EUR - Endplate EUR- -000 Endplate EUS, 0-hole spacing -00 Endplate EUS, 0-hole spacing -00 Aluminium beam UHAP-, length 00 mm -00 Aluminium beam UHAP- with re ex, length 00 mm -00 Aluminium beam UHAP- with re ex, length 00 mm
Multi XF Drawbar 0 0-0 Leg front. stamped no -0 or -00-0 Leg front. stamped no -0 or -00-0 Leg front. stamped no -0 or -0-0 Leg rear. stamped no -0 or -00-0 Leg rear. stamped no -0 or -0-0 Leg rear. stamped no -0 or -0-0 Leg rear. stamped no -0 or -0-0 Crossbar L= mm -00 Crossbar M= mm 0-0 Crossbar S= mm -0 Crossbar XS= mm -000 Bolt kit Mx0 ( pcs.) -000 Bolt kit crossbar ( pcs.) -000 Spacer tube kit ( pcs.) -00 Eye DIN 0-0 Eye ISO 0-0 Eye VBG -0 Eye, angled -0 Rear bracket Vibra 0-0 Rear bracket Briab -000 Pivot bolt -0000 Vibra block -000 Installation kit Briab -0000 Balance spring -000 Rigging screw -0000 Power plug bracket -0 Spring retainer NOTE! When replacing parts the fasteners should also be replaced. The sidemembers should be replaced as complete sides, i.e if the front side sidemember is replaced the rear sidemember on the same side should also be replaced.
Optimal Drawbar 0 0-0 Front part short -0 Front part long -0 Middle part short -0 Middle part long -0 Rear part 00-0 Rear part 00/0-0 Rear part 00/00-000 Bolt kit Mx0 ( pcs.) -000 Bultsats Mx0 (0 pcs.) 0-0000 Bultsats Mx0 ( pcs.) -0000 Bultsats Mx0 ( pcs.) -00 Eye DIN 0-0 Eye ISO 0-0 Eye VBG -0 Eye, angled -0 Rear bracket Vibra -0 Rear bracket Briab -000 Pivot bolt -0 Spacing kit hinge bracket 0-000 Installation kit Briab -000 Rear sliding bracket accessory kit incl. pos. -000 Front sliding bracket accessory kit incl. x pos.
Automatic Drawbar 0 a,b a,b,c,d,e,f a,b -000 Front slider (-00000) Manufactured to desired measurements -0000 Front slider (-00000) Manufactured to desired measurements -000 Rear A-frame (-00000) (incl. Pos.,,, 0) Manufactured to desired measurements -0000 Rear A-frame (-00000) (incl. Pos.,,, 0) Manufactured to desired measurements -0000 Wear ring for. mm Ø VBG tow eye -000 Wear ring for. mm Ø VBG tow eye -000 Bush for ISO 0 mm Ø tow eye -00 Bush for ISO 0 mm Ø tow eye -000 Bush for DIN 0 mm Ø tow eye a -000 Adjustment bolt assy incl. washers and nuts -000 Stop plate -000 Wear set (inkl. wear plate Pos. 0) a -0000 Bushing kit (lower jaw bushing, front bushing) b -0000 Front bushing a -0000 Air cylinder, assy (Pos. -) 0-00000 Power valve (only for -00000) 0-000 Spring retainer Spare parts for Automatic drawbar -000 b -00000 Coupling jaw c -00000 Bushing upper plate d -00000 Bushing front slider e -0000 Bushing lower plate f -0000 Welding bushing b 0-00 Mechanism
Automatic Drawbar 0 0 Screw MCS M0x0 mm Washer FZB 0,x mm -0000 Cover, air cylinder Screw MFS Mx mm O-ring Diaphragm -0000 Housing, air cylinder Seal Spacer 0 Wiper Lock-ring Pressure spring Shaft Washer TBRB x mm -0000 Lock bolt incl. bushing kit Guide Nyloc nut M -00000 Snap-on coupling, 0-00000 Snap-on coupling, straight 0-000 Wear plate for vertical play (Qty as required) -000 Kit for extra hole or hole repair -000 Diaphragm repair kit (Pos. -,, ) -000 Air cylinder repair kit (Pos.,,-,-) -000 Rebuild kit (for older automatic drawbar models)
Multi Drawbar D:0/ kn stamped no stamped no stamped no stamped no stamped no stamped no 0-00 Front slider DIN Ø 0 mm * stamped no: VBG 000 alt 00-0 Front slider ISO Ø 0 mm stamped no: VBG 00 alt 0-0 Front slider VBG Ø mm stamped no: VBG 00 alt 0-0 Mounting plates, leg. m stamped no: VBG 00 alt 0-0 Mounting plates, leg.0 m stamped no: VBG 00 alt 0-0 Leg,. m, c/c 00/00 stamped no: VBG 0 alt 0-0 Leg. m, c/c 0/00 stamped no: VBG 0 alt 0-0 Leg. m, c/c 0/00 stamped no: VBG 0 alt 0-0 Leg. m, c/c 0/00 stamped no: VBG 0 alt 0-0 Leg. m, c/c 00/00 stamped no: VBG 0 alt 0 * Only for performance level D: 0 kn. ** The bolt sets are treated with zinc iron-black and treated with wax. -00 Leg.0 m, c/c 0/00 stamped no: VBG 0 alt 00-00 Leg. m, c/c 0/00 stamped no: VBG 0 alt 00-0 Leg. m, c/c 00/00 stamped no: VBG 0 alt 0-0 Hinge bracket with tted Silent block stamped no: VBG 0 alt 0-0000 Silent block -0 Hinge bracket type Briab stamped no: VBG 0 alt 0-000 Assembly set Briab -000 Bolt kit M, containing ** Screw MS M x0,. ( pcs.) Locking nut M kl. ( pcs.) Washer BRB, HB00 (0 pcs.) -000 Pivot bolt 0-0000 Balance spring -000 Rigging screw -0000 Power plug bracket -0 Spring retainer
Multi Drawbar D: kn 0 b a stamped no stamped no b stamped no a stamped no stamped no stamped no -0 Front slider ISO Ø 0 mm stamped no: VBG 0 alt 0-0 Front slider VBG Ø mm stamped no: VBG 0 alt 0-00 Mounting plates, leg.,. stamped no: VBG 0 alt 00-0 Mounting plates, leg. m stamped no: VBG 0 alt 0-0 Leg,. m, c/c 0-00 stamped no: VBG 0 alt 0-0 Leg,. m, c/c00-00 stamped no: VBG 0 alt 0-0 Leg. m, c/c 0/00 stamped no: VBG 0 alt 0-0 Leg. m, c/c 00/00 stamped no: VBG 0 alt 0 ` -00 Leg. m, c/c 0/00 stamped no: VBG 0 alt 00-0 Leg. m, c/c 00/00 stamped no: VBG 0 alt 0-0 Hinge bracket with tted Silent block stamped no: VBG 0 alt 0-0000 Silent block -0 Hinge bracket type Briab stamped no: VBG 0 alt 0-000 Assembly set Briab a -0 Crossbar b -000 Crossmember Bolt kit -000 Bolt kit M, containing * Screw MS M x0,. ( pcs.) Locking nut M kl. ( pcs.) Washer BRB, HB00 (0 pcs.) 0-000 Bolt kit M, containing Screw MS M x0,. ( pcs.) Locking nut M o clock ( pcs.) Washer BRB, HB00 ( pcs.) -000 Pivot bolt -0000 Balance spring -000 Rigging screw -0000 Power plug bracket -0 Spring retainer * The bolt sets are treated with zinc iron-black and treated with wax.
Attachment parts,,,,, 0, 0,, Hinge bracket VBG standard -0000 Rear bracket incl. sleeve, for nylon bushing Ø - mm and Vibra block Ø mm -000 Rear bracket incl. sleeve For Vibra block Ø mm -0000 Silent block Ø mm -0000 Silent block Ø mm -0000 Nylon bushing Ø 0 mm -0000 Nylon bushing Ø mm -0000 Nylon bushing Ø mm -0000 Nylon bushing Ø mm -000 Spring bolt Ø 0 mm, incl. locking nut 0-000 Spring bolt zinc plated Ø mm, incl. locking nut -000 Spring bolt Ø mm, incl. locking nut -000 Spring bolt Ø mm, incl. locking nut -0000 Sleeve, width 00 mm Hinge bracket type Briab -000 Hinge bracket -000 Mounting kit Hinge bracket type ASJ -000 Hinge bracket -000 Mounting kit Trailer attachment -000 Bushing, Ø mm without slot -000 Bushing, Ø mm without slot -000 Bushing, Ø mm with slot -000 Bushing Ø mm with slot 0-000 Drawbar attachment trailer 0
Drawbar eyes 0 a, b -000 Eye -000 Clamp, x -000 Monting plate x mm -0000 Bolt kit -000 Slotted bushing, 0 mm ( ts to drawbar eye -000, -0000-000 Slotted bushing, std dim. ( ts to drawbar eye -000, -000) -00 0-p -000 Non-slotted bushing, std dim ( ts to drawbar eye -000, -000, -000) -0000 Wear ring. mm ( ts to drawbar eye -000, -000, -000, -0000, -0000) -000 0-p -0000 Castle nut kit 0-000 Bolt kit for drawbar eye 0 ( pcs.) -0000 Bolt kit for drawbar eye ( pcs.) -0000 Wear gauge for Ø 0 mm coupling/eyes a -0000 Wear gauge for Ø 0 and Ø mm couplings/eyes. Plastic b -0000 Wear gauge For Ø 0 and Ø mm couplings/eyes. Steel
Power plug / -000 Insert -terminal, incl. screws -000 Insert -terminal, incl. screws -000 Mounting kit, includes: Rubber gaskets ( pcs.) Sealant washers ( pcs.) Sealant screws ( pcs.) Plug ( pcs.) Screw,x mm ( pcs.) Screw Mx ( pcs.) Nuts M ( pcs.) Washers mm ( pcs.) -000 Lock hook -000 Insert -terminal, inkc. screws -000 Insert -terminal, inkc. screws Inserts for older sockets* -000 Mounting kit, includes: Rubber gaskets ( pcs.) Sealant washers ( pcs.) Sealant screws ( pcs.) Plug ( pcs.) Screw,x mm ( pcs.) Hose clamp ( pcs.) -000 Electrical heating coil * Older sockets are labelled VBG VÄNERSBORG SWEDEN PATENTED, while new ones are labelled VBG DESIGN BY DIAB SWEDEN PATENTED.
Power plug / ADR b a a b -000 Insert ADR -terminal incl. screws -000 Insert ADR -terminal incl. screws a -000 Installation kit Ø- mm, includes: ADR fitting (x) Blind plug (x) Rubber seal (x) Sealing washer (x) Screw.x mm (x) Screw Mx (x) Nut M (x) Washers tag mm (x) b -000 Installation kit Ø0.- mm, includes: ADR fitting (x) Adapter PG-PG (x) Rubber seal (x) -000 Lock hook -000 Insert ADR -terminal incl. screws -000 Insert ADR -terminal incl. screws a -000 Installation kit Ø- mm, includes: ADR fitting (x) Blind plug (x) Rubber seal (x) Sealing washer (x) Screw.x mm (x) Cable reliever (x) b -000 Installation kit Ø0.- mm, includes: ADR fitting (x) Adapter PG-PG (x) Rubber seal (x) -000 Electrical heating coil
VBG GROUP TRUCK EQUIPMENT GMBH Oberschlesienstrasse DE - 0 KREFELD Tel + 0 Fax + 00 www.ringfeder.de VBG GROUP TRUCK EQUIPMENT AB Box SE- VÄNERSBORG Tel + 00 www.vbg.se VBG GROUP SALES AS Postboks Leirdal NO-00 OSLO Tel. + 0 www.vbg.no VBG GROUP SALES A/S Industribuen 0- DK- Ejby Tel + www.vbg.dk VBG GROUP SALES BENELUX NV Industrie Zuid Zone. Lochtemanweg 0 BE- 0 Beringen Tel + Fax + www.vbggroup.be VBG GROUP SALES LIMITED Unit Willow Court West Quay Road Winwick Quay Warrington Cheshire WA UF Tel + www.vbgltd.co.uk Member of VBG GROUP www.vbg.eu