HSP MGH/1MGV (After Serial # )

PARTS LIST FOR HSP-2003-1MGH/1MGV (After Serial #15012067) engine oil grade: honda: sae 10w-30 Vanguard: above 40 f=sae30 Below 40 F=SAE10w-30 engine oil capacity: honda: 20 oz. vanguard: 24 oz. Pump Oil Grade: mi-t-m Pump Oil #AW-4085-0016 Pump Oil Capacity: 11.83 oz. FUEL NOZZLE: 1.25 60 B DELAVAN BTU INPUT: 205,000 / hour Pressure Nozzle Size: 3.5 Copyright 2005, Mi-T-M Corporation

This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M hot water pressure washer was constructed and designed with quality and performance in mind. Each component has been rigorously tested to insure the highest level of quality. The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, HOT WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine Mi-T-M parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. NEVER make adjustments on machinery while the unit is connected to the engine without first removing the ignition cable from the spark plug. Turning over the machinery by hand during adjustment or cleaning might start the engine and machinery with it, causing serious injury to the operator. 3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. Block the wheels to prevent the unit from moving. Be especially careful to properly dispose of any flammable materials. 5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving. Table of Contents SPECIFICATIONS...3 FLOW CHART...4 EMF SYSTEM...4 GENERAL THEORY OF OPERATION...5 DECAL PLACEMENT...6 FRAME (AFTER SERIAL #15010743)...8 ENGINE/PUMP ASSEMBLY (AFTER SERIAL #15012067)...10 HIGH PRESSURE PUMP (3-0139) (AFTER SERIAL #15012067)...12 UNLOADER/MANIFOLD ASSEMBLY...14 UNLOADER (850-0252)...16 PRESSURE SWITCH (22-0171)...18 DETERGENT INJECTOR (50-0052)...20 COIL DRAIN PLUG (850-0218)...22 HEAT EXCHANGER/EMF SYSTEM...24 BOILER ASSEMBLY (850-0361)...26 GUN ASSEMBLY (16-0001)...28 DUAL LANCE ASSEMBLY (16-0416)...30 FUEL TANK (850-0214)...32 FUEL PUMP (3-0129)...34 FUEL SOLENOID (44-0098)...35 EMF SYSTEM (850-0239)...36 WIRING SCHEMATIC...38 WIRING DIAGRAM...39 Copyright 2005, Mi-T-M Corporation 2

SPECIFICATIONS MODEL NUMBER HSP-2003-1MGH HSP-2003-1MGV Operating Pressure (PSI/Bar): 2000/ 3 (+/- 5%) Water Volume (GPM/lpm): 2.5/9.5 (+/- 5%) Outlet Water Temperature (F/C): 130 F/ 54 C (+/- 20 F) rise above inlet ambient (210 F/ 99 C maximum) Engine: Honda Briggs & Stratton Vanguard Horsepower 5.5 6.0 Engine Type Four Stroke, Overhead Valve, Single Cylinder Oil Type SAE0W-30 Above 40 F=SAE30/ Below 40 F=SAE 10W-30 Oil Capacity (oz./liter) 20/.6 24/.7 Low Oil Protection Oil Alert TM Oil guard TM Fuel Type Unleaded gasoline 6 Octane Minimum Fuel Capacity (gal./liter).95/ 3.6 1.05/3.97 Starting Copyright 2005, Mi-T-M Corporation 3 Recoil Rope Maximum No Load RPM 3600 (+/- 00) High Pressure Pump: Direct Driven, Oil Bath, Triplex Piston Oil Type Mi-T-M Pump Oil #AW-405-006 Oil Capacity (oz./liters) 11.83/.35 Plungers Manifold Valves Unloader Inlet Water Strainer Heat Dump Valve Detergent Injector: Burner Fuel System: Fuel Type Ceramic Forged Brass Stainless Steel Preset Removable Clear Bowl for inspection and cleaning of Stainless Steel Screen Relieves heated water during unloader bypass stage Adjustable Low Pressure downstream from pump No.1 or No.2 Fuel Oil, Diesel or Kerosene Fuel Capacity (gal./liters) 4/5 Fuel Filter/ Water Separator Fuel Pump Fuel Pressure (PSI/ BAR) Fuel Nozzle Spin on (10 micron) filter/ E-Z water drain Two Line, Single Stage 45/ 0 1.25 60 B Delavan Fuel Consumption (gph/ lph) 1.48 GPH Continous Burning Electro Magnetic Firing (EMF) System: Belt Driven (Patent # 5,954,494) Ignition Control Voltage Blower Heat Exchanger: Transistorized Magneto 12 Volt DC Forced Air Vertical, Top fired, Dual Spiral Coil BTU Input 205,000 Efficiency Smoke Density Controls: On/ Off Switch Pressure Switch 80-83% with #2 Fuel Oil/ Diesel 0-3 per ASTM D2156 Industrial grade cam switch Shuts off burner fuel supply upon trigger release High Limit Switch Shuts off burner fuel supply when outlet water temp. exceeds 210 F/ 99 C Fuel Solenoid: 12 Volt Safety Relief: Relieves excess system pressure Unit Net Weight (Lbs/kg): 265/20 270/23 Unit Shipping Weight (Lbs/kg): 3/73 36/75 Unit Net Dimension (In/cm): Unit Shipping Dimension (In/cm): 37.5L x 29.5W x 37.5H/95L x 75W x 95H 46.5L x 31.5W x 48.5H/118L x80w x123h

GENERAL THEORY OF OPERATION WATER FLOW: Connect a pressurized water source to the Inlet Garden Hose Connection (1) and turn on the water supply. The water will flow through a Water Strainer (2) which has a clear inspection bowl. The water then travels into the Triplex High Pressure Pump (3) which has an Unloader (4) that bypasses the water when the trigger gun is closed. To protect the pump from heated water during this bypass stage, a Heat Dump Valve (5) will open at 140 F/60 C allowing the heated water to escape. The Heat Dump Valve automatically resets when the water cools. The Pressure Switch (6) controls the fuel supply to the burner. When using detergents, the solution passes through the Detergent Strainer (7) located on the Detergent Hose (8). The detergent solution then travels into the Adjustable Low Pressure Detergent Injector (9). From there, the water may be allowed to flow out of the drain plug (10) or through the heat EXCHANGER INLET (11) where it is heated when the burner is on. As the water exits the Heat Exchanger OUTLET (12), it enters a safety system which protects the operator from danger. The safety system contains a High Temperature Limit Switch (13) which senses the water temperature and shuts off the fuel supply to the burner if it gets too hot. If the unloader fails to by pass the water or the burner remains on when the trigger gun is closed, the SAFETY RELIEF (14) will relieve and allow water to exit safely. The heated water then flows through the High Pressure Hose (15) and to the Trigger Gun Assembly (16) which allows the operator to control the water spray. When the trigger gun is open, the water flows through the Adjustable Pressure Dual Lance (17) and exits the Nozzle (18). FUEL FLOW: The Fuel Pump draws fuel from the Fuel Tank (19) through a replaceable Fuel Filter/Water Separator (20) and into the Fuel Pump (21). Fuel exits the fuel pump, into a Fuel Solenoid Valve (22) which controls fuel flow to the Fuel Nozzle (23) where it ignites and burns in the heat exchanger. EMF SYSTEM: The patented Electro Magnetic Firing (EMF) System is an integrated system which gives all the requirements for combustion. The Belt (1) from the power source turns the Hub (2) which has two Exterior Magnets (3) attached. As these magnets spin past the Ignition Module (4), a magnetic flux is created from which the ignition module produces a high voltage. This voltage arcs across the electrodes giving the spark that is needed for ignition. This hub has an Internally Mounted Magnet (5) which spins past a Stator (6) that produces the voltage that controls the fuel supply to the heat exchanger. In addition to this, the hub also spins the Blower Fan (7) that forces the air into and through the heat exchanger. The Fuel Pump (8) is also connected the hub by means of a flexible coupler. Copyright 2005, Mi-T-M Corporation 5

HSP-2003-1MGH/GV-081505-RZ DECAL PLACEMENT REF. # DESCRIPTION PART # QTY. Decal- Warni ng: Don't Modify Plumbing (See 34-9001) N/A Sep. 2 Decal- Clear Laminate n/a 3 Decal- Data Plate n/a 4 Serial number n/a 5 Decal- Warni ng: Hot Coil Exhaust (See 34-9001) N/A Sep. 6 Decal- Allow to Cool (See 34-9001) N/A Sep. 7 Decal- Hot Surface (See 34-9001) N/A Sep. Decal- Risk of Fire (See 34-9001) N/A Sep. 9 Decal- Warni ng/ Caution/ Operation (See 34-900) N/A Sep. 0 Decal- Stripe 34-0560 Decal-White Die Cut 34-055 2 Plastic Mi-T-M logo 62-007 Safety Decal Kit (1, 5-9) 34-900 Copyright 2005, Mi-T-M Corporation 7

HSP0 2003-0505-Rz FRAME (AFTER SERIAL #15010743) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Frame Assembly 5-9002A0 22 Screw 27-006 2 Wheel 4-007 4 23 Washer 2-0003 2 3 jam Nut 30-07 4 24 Handle grip 7-070 4 Bolt 27-9524 4 25 Locknut 30-055 3 5 Flatwasher 2-0022 0 26 Washer 2-0002 6 6 Fuel Tank Assembly (Includes 7, 8) 50-024 27 Bracket 20-0546A0 7 Fuel Cap 2-0033 2 Brake Plate 20-050A0 Plug 23-0296 29 Screw 27-005 3 9 Fuel Hose 5-047 2 30 Locknut 30-057 0 Heat Exchanger/ EMF System Assembly (See Exploded Drawing) N/A Sep. 3 grommet 33-0366 Bolt 27-0526 2 32 Washer 2-0057 2 Hose 5-0007 2 33 Brake Handle Assembly 20-0552A0 3 Hose Clamp 42-00 2 34 Screw Cover 62-0057 4 Unloader/Manifold Assembly (See Exploded Drawing) N/A Sep. 35 Hood Assembly 50-064 5 Hex Nut 30-057 2 36 Screw Connect 7-0035 6 High Pressure Hose Assembly 5-099 37 Hose Assembly 5-046 7 High Pressure Hose Assembly 5-094 3 gun Assembly 6-000 Bolt 27-9525 4 39 Dual Lance Assembly 6-046 9 Hex Nut 30-3023 6 40 Nozzle- 1503.5-0254 20 Engine/Pump Assembly (See Exploded Drawing) N/A Sep. 4 Nozzle- 4060-00 2 Fuel line Hose 33-027 Copyright 2005, Mi-T-M Corporation 9

HSP102-011204-BAR ENGINE/PUMP ASSEMBLY (AFTER SERIAL #15012067) REF # DESCRIPTION PART # QTY REF # DESCRIPTION PART # QTY Hose Gasket 26-000 9 Elbow 23-09 2 Hose Swivel 23-0095 20 Plug 23-0244 3 Strainer Complete (Includes 4-7) 9-0096 2 Heat Dump Valve 22-020 4 Strainer Bowl 9-003 22 High Pressure Hose Assembly 5-057 5 Stainless Steel Screen 9-004 23 Elbow 23-0242 6 Strainer Gasket 25-0056 24 Bolt Mount Kit (Includes 25-27) 70-0096 7 Strainer Body 9-005 25 Bolt w/pump n/a 3 Reducer 23-0243 26 Split Lockwasher 46-04 3 9 High Pressure Pump 3-039 27 Flatwasher 46-049 3 0 Belt -0037 2 Spacer 20-0736A0 Sheave 0-0076 29 Key 43-0073 2 Bolt 27-04 4 30 Screw (HSP-2003-1MGH) 27-3093 2 3 Adapter Plate 3-0044 - Screw (HSP-2003-1MGV) 27-3094 2 4 Bolt 27-009 3 Muffler Deflector (HSP-2003-1MGH) 45-005 5 Lockwasher 46-043 - Muffler Deflector (HSP-2003-1MGV) 45-0050 6 Flatwasher 2-0003 32 Muffler guide (HSP-2003-MgH) 45-0052 7 Hose *(Two Feet Required) 5-0007 33 Engine- 5.5 H.P. Honda (HSP-2003-1MGH) -003 Hose Clamp 42-00 - Engine- 6.0 H.P. Vanguard (HSP-2003-1MGV) -0069 *Must Order in One Foot lengths Copyright 2005, Mi-T-M Corporation 11

3-0139-011204-BAR HIGH PRESSURE PUMP (3-0139) (AFTER SERIAL #15012067) REF # DESCRIPTION PART # QTY REF # DESCRIPTION PART # QTY REF # DESCRIPTION PART # QTY Flatwasher n/a 4 Crankcase 46-24 35 O-ring (See 70-029, 70-030 or 70-060) N/A Sep. 6 2 Lockwasher n/a 4 9 Oil Level Gauge 22-023 36 Discharge Valve Seat 46-0309 3 3 Bolt n/a 4 20 Gasket 26-039 37 Valve Assembly (Inc. 38-40) (See 70-0130) N/A Sep. 3 4 Bolt 27-40 3 2 Piston Rod Pin 43-0063 3 3 Discharge Valve (See 70-0130) N/A Sep. 3 5 Cover-Rear 46-25 22 Piston Rod 46-0302 3 39 Valve Spring (See 70-0130) N/A Sep. 3 6 O-ring 25-0557 23 Washer 46-034 3 40 Valve Spring Retainer (See 70-0130) N/A Sep. 3 7 Oil Seal 26-024 24 Oil Seal 26-056 3 4 Manifold Outlet 46-03 Bearing-Inner 4-0027 25 Seal Retainer 46-0303 3 42 Bolt 46-035 6 9 Connecting Rod 46-029 3 26 Low Pressure Seal (See 70-0129) N/A Sep. 3 43 Discharge Valve Adapter 46-063 3 0 Crankshaft 46-0654 27 Manifold Inlet 46-0304 44 Valve Seat 46-062 3 Snap Ring 46-0300 2 Plunger 46-0305 3 Bolt Mount Kit ( 4 each 13-15) 70-0096 2 Bearing-Outer 4-002 29 Valve Inlet 46-0306 3 Seal Kit (3 each 26, 34, 35) 70-029 3 Flatwasher (See 70-0096) N/A Sep. 4 30 Spacer 46-0307 3 Valve Kit (3 each 35-37) 70-030 4 Lockwasher (See 70-0096) N/A Sep. 4 3 Spring 49-0064 3 Inlet Valve Kit (3 each 29-33, 35) 70-060 5 Bolt (See 70-0096) N/A Sep. 4 32 Washer 46-036 3 Optional Valve Kit (3 each 35, 37, 43-44) 70-067 6 Plug 39-0057 2 33 nut 46-037 3 Valve Kit (3 each 26, 29, 34-35) 70-039 7 O-ring 25-099 2 34 Seal-High Pressure (See 70-029) N/A Sep. 3 Copyright 2005, Mi-T-M Corporation 13

HSP088-1MDL-032900-BAR UNLOADER/ MANIFOLD ASSEMBLY REF. # DESCRIPTION PART # QTY. Elbow 23-09 2 Hose Clamp 42-00 3 Hose *(Two Feet Required) 5-0007 4 Pressure Switch 22-07 5 High Pressure Hose Assembly 5-057 6 Manifold Block 5-0025 7 Hex Nipple 24-000 Plug 23-023 9 Unloader Assembly 50-0252 0 Detergent Stainer 9-0050 Detergent Hose *(Six Feet Required) 5-002 2 Detergent Injector 50-0052 3 Elbow 23-0307 4 High Pressure Hose Assembly 5-099 *Must Order in One Foot lengths Copyright 2005, Mi-T-M Corporation 15

OMGEN163-101298-BAR UNLOADER (850-0252) REF. # DESCRIPTION PART # QTY. Hex Nut -0362 2 2 Cover 7-009 3 Set Screw 27-420 4 Adjusting Insert- Brass -0363 5 Adjustment Nut -0364 6 Set Screw -0365 7 glide Ring -0366 Spring 49-004 9 Hex Nut -0367 0 Bushing -036 Unloader Body -0369 2 Retainer -0269 3 Valve Housing -004 4 Spring 49-0023 5 Valve -005 6 O-ring 25-0036 7 Cylinder Pin -0372 Piston Repair Kit 70-0243 9 Spacer -037 20 Stop nut -057 2 Washer 29-054 2 Check Valve Repair Kit (Includes 13-16) 70-0244 Unloader Complete 50-0252 Copyright 2005, Mi-T-M Corporation 17

PRESSURE SWITCH (22-0171) 22-0171-120799-BAR REF. # DESCRIPTION PART # QTY. Pressure Switch 22-07 2 Screw n/a 4 3 Cover n/a 4 O-ring (See 70-0306) N/A Sep. 5 Micro Switch n/a 6 Retainer Clip n/a 7 Body n/a O-ring (See 70-0306) N/A Sep. 2 9 Back-up Ring (See 70-0306) N/A Sep. 0 Piston n/a Washer n/a 2 Spring 49-044 3 Washer n/a 4 Plastic Housing n/a 5 O-ring (See 70-0306) N/A Sep. 6 nut n/a 7 Wire Assembly n/a O-ring Repair Kit (Inc. 4, 8-9, 15) 70-0306 Copyright 2005, Mi-T-M Corporation 19

50-0052-072701-RD DETERGENT INJECTOR (50-0052) REF. # DESCRIPTION PART # QTY. Detergent Injector (Inc. 2-11) 50-0052 2 Orifice (2.1mm) 50-0057 3 Injector Body n/a 4 Spring (See 52-0056) N/A Sep. 5 Ball (See 852-0056) N/A Sep. 6 O-ring (See 52-0056) N/A Sep. 7 Piston Retainer 50-056 Spring 49-0056 9 O-ring (See 52-0056) N/A Sep. 0 Adjustable Shutter Barb 50-057 Adjustment Knob 50-05 Injector Repair Kit (Includes 4-6, 8) 52-0056 Copyright 2005, Mi-T-M Corporation 21

850-0218-041597-BAR COIL DRAIN PLUG (850-0218) REF. # DESCRIPTION PART # QTY. Bolt 27-9526 2 Retaining Cable 33-0260 3 Snap Ring 33-026 4 Hand Wheel 6-0239 5 Plug 24-047 6 Back-up Ring 25-0424 7 O-ring 25-0423 Copyright 2005, Mi-T-M Corporation 23

HSP09-042607-Rz HEAT EXCHANGER/ EMF SYSTEM REF. # DESCRIPTION PART # QTY. 3MGH/R QTY. 3MGV REF. # DESCRIPTION PART # QTY. 3MGH QTY. 3MGV Boiler Assembly Complete 50-036 2 Flatwasher 2-0022 2 EMF Assembly 50-0239 29 Bolt 27-9526 2 2 3 Hex Nut 30-3022 2 2 30 Beltguard- Honda 20-0366A0-4 Fuel Pump Coupler 33-0225 - Beltguard- Vanguard 20-0365A0-5 Adjustable Sheave Shaft Assembly (Inc. 5, 8, 9) 50-067 3 Bracket 20-0354A0-6 nut 30-059 3 3 32 Connector 23-044 7 Sheave Assembly 50-077 2 2 33 Solenoid- 12 Volt 44-009 Pulley 33-022 34 Elbow 23-0249 9 Bolt 27-9524 3 35 Electric Box Backplate 20-0356A0 0 Fuel Pump Bracket 20-0353A0 36 Bolt 27-952 4 4 Hex Nut 30-3023 0 37 Terminal Stripe *(One Foot Required) 32-0394 2 Bracket 20-0360A0 2 2 3 Rocker Switch 32-0626 3 Hex Nut 30-000 39 Electric Box Cover 20-0357A0 4 Fuel line 5-0253 40 Electrical Locknut 32-0292 5 Elbow 23-027 4 Strain Relief 9-0046 6 Fuel Hose 5-047 2 2 42 Screw 27-3062 7 Connector 23-0247 2 2 43 Cable Clamp 32-042 Fuel Pump 3-029 44 Pressure Relief Valve 22-0272 9 Filter Fuel Water Seperator 9-0070 45 Adapter 23-097 20 Fuel Water Seperator Replacement Bowl 9-007 46 nipple 24-04 2 2 2 Fuel Water Seperator Replacement Filter 9-0053 47 Outlet Connector 24-03 22 Hex Nipple 23-0250 4 High Limit Switch Probe 32-042 23 Plate 20-0363A0 49 Adapter 23-0279 24 Pin 33-02 50 Elbow 23-0034 25 Tensioner Sheave Shaft Assembly 50-066 5 Drain Plug Assembly 50-02 26 Shaft 33-022 52 Tee 23-005 27 Tensioner Base 0-007 53 Hose Assembly 5-074 *Must Order in One Foot lengths Copyright 2005, Mi-T-M Corporation 25

850-0361-101806-PjH BOILER ASSEMBLY (850-0361) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. Hex Nut 30-02 2 7 Top Pan 20-0323 2 Plug 24-0034 Bolt 27-06 3 3 Outer Wrap Assembly 20-034A0 9 Bolt 27-05 4 Bolt Hex Head 27-79 2 20 Support Plate 33-03 5 Air Diverter Plate 20-0454A0 2 Electrode 32-0377 2 6 Air Diverter Stem Assembly 20-0377A0 22 Washer 2-007 2 7 Lockwasher 2-009 23 Bolt 27-07 nut 30-600 24 Electrode Mounting Plate 33-00 9 Insulation 33-0267 25 Nozzle Holder 33-02 0 Washer 2-052 2 26 Snap Ring 25-0290 Heat Exchanger Coil Assembly 66-002 27 Sight glass 33-079 2 Pan Assembly (Includes 3-2) 70-04 2 Bolt 27-03 3 3 Exhaust Pan 20-0324 29 Fuel Nozzle -030 4 Heat Deflector 20-0325 30 nut 30-6002 3 5 nut 30-600 6 3 Washer 2-02 3 6 Lockwasher 2-009 3 Copyright 2005, Mi-T-M Corporation 27

16-0001-110399-RD GUN ASSEMBLY (16-0001) REF. # DESCRIPTION PART # QTY. Plastic Housing 6-000 2 Screw 27-3230 2 3 Brass Housing 6-002 4 Gun Repair Kit 70-0055 5 Brass Plug 39-0024 6 Plastic Cover 6-0009 7 Pipe Assembly 6-003 Trigger Pin 6-0063 9 Trigger/Safety Lock-off 6-000 0 Pipe Assembly- Inlet 6-006 Complete gun Assembly 6-000 Copyright 2005, Mi-T-M Corporation 29

6-046-02405-Rz DUAL LANCE ASSEMBLY (16-0416) REF. # DESCRIPTION PART # QTY. Dual Lance Assembly - 36" (Inc. 2-11) 6-046 2 Detergent Nozzle -00 3 nut 30-600 4 Clamp 6-0420 2 5 Lower Valve Cover (See 16-0416) N/A Sep. 6 Housing (See 6-046) N/A Sep. 7 lance 6-049 Handle Repair Kit 70-049 9 lance (See 6-046) N/A Sep. 2 0 Screw 27-96 Nozzle Adapter 24-020 2 Copyright 2005, Mi-T-M Corporation 31

850-0214-34-9001-121797-BAR FUEL TANK (850-0214) REF. # DESCRIPTION PART # QTY. Fuel Tank Assembly (Inc. 2-8) 50-024 2 Plug 23-0296 3 Fuel Tank (See 850-0214) N/A Sep. 4 Elbow 23-0237 5 Fuel Pick-up Line 33-0270 6 Flare 23-0247 7 Decal-Warning-Risk of Fire (E/S) (See 34-9001) N/A Sep. Vented Fuel Cap 2-0033 Safety Decal Kit (Includes 7) 34-900 Copyright 2005, Mi-T-M Corporation 33

FUEL PUMP (3-0129) HSP018-3-0129-041597-BAR FUEL PUMP (3-0129) REF. # DESCRIPTION PART # QTY. Fuel Pump Complete (Includes 2-) 3-029 2 Cover Screw 46-006 4 3 Cover-Left Hand 46-0 OMHSP018-041597-BAR 4 Strainer 9-0034 5 Cover Gasket 26-009 6 Plug 24-0044 3 7 Body n/a Plug 24-002 Copyright 2005, Mi-T-M Corporation 34

FUEL SOLENOID (44-0098) HSP013-44-0098-121698-BAR FUEL SOLENOID (44-0098) REF. # DESCRIPTION PART # QTY. Solenoid Complete-12V 44-009 2 Solenoid Body 46-03 3 Solenoid Piston 46-02 4 Solenoid Base 46-04 OMHSP013-121698-BAR 5 Screw (See 44-0098) N/A Sep. 2 6 Solenoid Coil-12V 46-05 7 Spring (See 44-009) N/A Sep. Piston nut 46-06 9 Din Connector Cord 32-0443 Copyright 2005, Mi-T-M Corporation 35

850-0239-113099-BAR EMF SYSTEM (850-0239) REF. # DESCRIPTION PART # QTY. EMF Assembly Complete (Inc. 2-17) 50-0239 2 Blower Flange Assembly (Inc. 3-6) 50-062 3 Sealed Bearing 4-004 2 4 Blower Flange 3-0040 5 Spacer 33-0206 6 Blower Shaft 20-0347 7 Woodruff Key 43-000 2 Cable Clamp 32-0403 9 Screw 27-2070 0 Stator Coil 50-09 Screw 27-0740 4 2 Flange Magnet Hub 3-004 3 Hex Nut 30-077 2 4 Bolt 27-9 2 5 Flatwasher 2-0002 2 6 Ignition Coil Assembly 50-06 7 Blower Fan 44-005 Set Screw 30-302 Copyright 2005, Mi-T-M Corporation 37