Specification Ecowood and Ecowood Plus Disclaimer Jasno Shutters reserves all rights on modification of any contents within this documentation without prior notification.
2
Content 1. Material... 7 2. Components... 8 Louver options... 8 Stile options Ecowood... 8 Stile options Ecowood Plus... 9 Center stile... 10 Rail and position... 10 Hang strip options... 12 T-post... 15 Tilt Rod... 16 Louverpins... 16 3. Color options... 17 4. Order size definitions... 18 5. Dimensions and gaps... 20 Ecowood... 20 Ecowood Plus... 20 6. Matching... 22 7. Hardware... 23 Hidden Hinge... 23 Button catch and lock for connecting panels... 24 Window handle flat 15mm... 25 8. Cutout in hang strips... 26 Specification Ecowood 2015 version 2 3
9. Bi-fold track system... 27 General... 27 Bi-foldtrack system 90... 29 Panel configurations for bi-fold track system 90... 32 Bi-fold track 180... 33 Panel configurations for bi-fold track system 180... 34 10. By-Pass System: Louvers closed position... 35 General... 35 Mounting type... 36 11. Open Bypass system: Louvers opened position... 38 General... 38 Mounting type... 40 12. Special shapes (only for Ecowood)... 42 Possible shapes... 42 Offset tiltrod... 42 13. Shutters with fixed louvers... 43 Possible options... 43 14. Remote control for Ecowood and Ecowood plus... 44 Position solar panel... 47 Color coordination chart... 49 15. Frame/Track splice... 50 16. Manufacture time... 50 17. Package... 50 18. Extra louvers... 50 4
Important remarks for Ecowood Ecowood Ecowood Plus Primewood Max. panel width 1 folding panel: Lamel 47mm 600 600 762 Lamel 63mm 750 914 914 Lamel 89mm 750 914 1066 Lamel 114mm - - 1066 Max. panel width 2 folding panels: Lamel 47mm 600 600 660 (762 with track) Lamel 63mm 600 600 660 (914 with track) Lamel 89mm 600 600 660 (914 with track) Lamel 114mm - - 660 (914 with track) Different options: Moisture resistant Splash proof Roof window R frame 18 Paint colors 18 Stain colors Sloped windows Arch and round windows Remote control Double hang Silent View Specification Ecowood 2015 version 2 5
Additional comments that apply to all Ecowood versions: Always support the panels at the bottom due to the higher weight of Ecowood panels. To plane and/ or saw in the ecowood shutters is not recommended for this will interrupt the polypropylene coating. A combination of the different shutter types can be made of course (preferably the same type in 1 window opening). For further detailed informations and differences between the basswood see the specifications. 6
1. Material Ecowood is made of composite wood (made of wood fibers) from environmental friendly managed forests. The polypropylene coating makes sure the surface is smooth and resistant to dirt and dust for easy cleaning. The frames are connected via a classical mortise-and-tenon joint, maximising the glued surface for maximum rigidity. The engineered stile has multiple layers inside, made of hardwood; this imparts excellent durability to the core of the stiles and prevents it from warping. Jasno Ecowood Plus has, the name says it all, a couple of pluses compared to the Jasno Ecowood. Because the louvers are made of the much lighter ABS, the panels can be made wider. Also the Ecowood plus is available in 18 paint colors. Specification Ecowood 2015 version 2 7
2. Components Louver options 47.6 63.5 88.9 11.7 10 9 Stile options Ecowood 25.4 25.4 41.3 41.3 41mm Butt Stile 41mm Astragal Stile 25.4 25.4 50.8 50.8 50mm Butt Stile 50mm Astragal Stile 25.4 25.4 57.15 57.15 57mm Butt Stile 57mm Astragal Stile If the panel width exceeds 550mm the 50mm stile will be applied. 8
Stile options Ecowood Plus 25.4 25.4 41.3 41.3 41mm Butt Stile 41mm Astragal Stile 25.4 25.4 50.8 50.8 50mm Butt Stile 50mm Astragal Stile 25.4 25.4 57.1 57.1 57mm Butt Stile 57mm Astragal Stile Specification Ecowood 2015 version 2 9
Center stile 57.15mm 25.4mm Center stile The stile has multiple layers inside, which is made of hardwood, and this imparts an intense level of durability to the cores of our stiles and results in a long term stability and durability robust support system for your shutter panels. The default position for astragal stile is right over left. (Astragal stile on the right, and butt stile on the left). The center stile is used for NON hinged panels with a maximum width of 1219mm (47mm louver) or 1270mm (63mm 89mm louver), exactly in the middle of the panel. From 914mm (with a louver size of 63mm and 89mm) and 762mm (louver size 47mm) the center stile is obliged. Rail and position Top/Bottom Rail Divider Rail (76.2mm) 21mm 7.9mm 21mm 7.9mm 70mm to 165mm 76.2mm Panel height Min. height top / botom rail < 508mm 70mm < 1143mm 76mm < 1625mm 86mm < 1980mm 92mm < 3378mm 111mm 10
Divider Rail 2 Divider Rail 1 76.2 76.2 The divider rail splits up a panel in 2 or 3 sections. The sections function separately from each other. When the panel height exceeds 1879mm (Ecowood plus 1980mm), one divider rail is obliged, if the height from top or bottom of panel to the center of the divider rail exceeds 1879mm (Ecowood plus 1980mm) a 2 nd divider rail is obliged. Due to the fact that top and bottom rails are equal in height (default) the final position can vary from the ordered position: Louver size 47mm 63mm 89mm Tolerance 19mm 25mm 38mm When the position of the divider rail must be at exact height as ordered, please use the special remark DR at exact height. Specification Ecowood 2015 version 2 11
Hang strip options Hang strips can be ordered in the following possibilities: 1 side left or right: panel and hang strip have same height 2 sides left and right: panel and hang strip have same height 3 sides left, right top or bottom: see drawing for gaps 4 sides around: see drawing for gaps 2.5mm 2.5mm 2.5mm 2.5mm 5mm 5mm 12
Available hang strips: 25.4mm x 41.3mm, 25.4mm x 50.8mm en 25.4mm x 63,5mm. Option with surcharge, added from the Primewood collection, are the hang strips: 50mm x 40mm, 50mm x 50mm, 50mm x 60mm, 50mm x 75mm. These hang strips can be planed and also please note that the surface is slightly different from the Ecowood panels. 50mm 3mm 5mm 3mm 88.9mm 63.5mm 47.6mm 40mm 50mm 60mm 75mm Specification Ecowood 2015 version 2 13
Pre-drill mounting holes: Front Side Hang strip 50mm: Front Side 1 Ø14 40 50 60 75 75 20 60 50 Ø5 40 1 50 Ø14 Hang strip mounting hole pre-drill positions: front, or side. No will holes will be drilled for top and/ or bottom hang strips. Pre-drill hole: the top & bottom pre-drill hole will be at 80mm from top & bottom. 80 80 14
T-post T-Posts divide a window vertically into sections. T-Posts can be used to match the design of a window that has a natural break, a mullion, to accommodate panel configurations that require more than two panels, or just for aesthetic purposes. Options: 75mm 60mm 50mm 40mm Paneel Paneel 50mm For T-post, no pre-drilled hole is as default. If you want to pre-drill T-post (always at front), please specify it on the order form. T-post pre-drill hole position will follow the Hang Strip pre-drill hole position. Position of the T-post Measure from left to the center of the T-post, see the drawing below: 50mm 50mm T -post 1 5mm 5mm T -post 2 order width Example configuration: LTLRTL Specification Ecowood 2015 version 2 15
Tilt Rod Regular tilt rod Default is placed at the center. 16mm 11.5mm Concealed gear system (Silent View) Available for 63mm and 89mm louvers. The gear system is concealed in the stile and covered with a cover strip in the same material and color as the shutter. Important The concealed gear system will be split into half if the panel height is over appr. 1370mm without divider rail, or from center of divider rail to top/bottom of the panel is over this limit. With remote control the section will not be split and the maximum height for one section is 1879mm (Ecowood Plus 1980 mm), due to the fact that the remote will operate the gear system and not the louver. Louverpins In order to make it possible that the louver stay in the wished position, the louver pins have resistance. In each panel there is also a screw to adjust the resistance of the louvers. 16
3. Color options Ecowood Ecowood Plus 001 Pure White 001 Pure White 003 Silk White 002 Extra White 004 Bright White 003 Silk White 006 Pearl 004 Bright White 009 Creamy 006 Pearl 008 Marshmallow 009 Creamy 011 Cameo 013 Bisque 019 String 023 White Dove 027 White Birch 037 Pointed White 048 Chai 049 Stone Grey 051 Brown Grey 053 Clay 836 Classic Black Due to the nature of material manufacturing, colors may vary slightly between dye lots. Please order shutters for the same home or room at one time. Slight variations may also occur between the finished products and the color decks. Special colors are NOT available in ecowood. Specification Ecowood 2015 version 2 17
4. Order size definitions Order width for the different mounting methods: INSIDE MOUNT Hangstrip Hangstrip 5mm gap in factory ORDER WIDTH Hangstrip T ake 3-4 mm gap! ORDER WIDTH OUTSIDE MOUNT take sufficiant space (min. 25mm) 5mm gap in factory Hang strips (3 or 4 sided for extra support) ORDER WIDTH 18
Different panel sizes in one window are possible. Please indicate this in special notes. Hangstrip + LL RR + Hangstrip 5mm ORDER WIDTH Order height for the different mounting methods: Inside mount Outside mount Take 5-7mm gap! Take 5-7mm gap! ORDER HEIGHT ORDER HEIGHT For order height and width when ordering track systems: Please go to the chapters Bypass or Bifold track systems. Specification Ecowood 2015 version 2 19
5. Dimensions and gaps Ecowood Panel width in mm Panel heights in mm Louver 1 hinged panel OR in bypass track Panel only with center stile 57mm 2 hinged panels with bottom support OR in Bifold track WITHOUT divider rail 1 and/or 2* divider rail Min. Max. Max. Max. Min. Max. Max. 47mm 152 600 1219 600 254 1879 3378 63mm 152 750 1270 600 254 1879 3378 89mm 152 750 1270 600 254 1879 3378 Ecowood Plus Panel width in mm Panel heights in mm Louver 1 hinged panel OR in bypass track Panel only with center stile 57mm 2 hinged panels with bottom support 2 hinged panels in bifold track WITHOUT divider rail 1 and/or 2* divider rail Min. Max. Max. Max. Max. Min. Max. Max. 47mm 152 600 1219 600 600 254 1980 3378 63mm 152 914 1270 600 600 254 1980 3378 89mm 152 914 1270 600 600 254 1980 3378 Always support the panels at the bottom due to the higher weight of Ecowood panels. Different panel sizes in one window are possible. Please indicate this in the remarks of the online order system. * When the panel height exceeds 1879mm (Ecowood Plus 1980mm), one divider rail is obliged, if the height from top or bottom of panel to the center of the divider rail exceeds 1879mm (Ecowood Plus 1980mm) a 2 nd divider rail is obliged. maximum of 2 hinged panels without a track system. 20
Gap between panels / panel and Hang Strip (where there are hinges) Gap between panels / panel and Hang Strip (no hinges) Gap between panel and frame on top and bottom For Bi-fold system, gap between panel and side frame/to the end of header when no side frame required For By-pass system, gap between panel and side frames For By-pass system, gap to end of header/track for each side when no side frames required 1,5mm 5mm 2,5mm 6,5mm 0mm 3mm Specification Ecowood 2015 version 2 21
6. Matching When there are windows/doors with different heights close to each other, please make a remark on the order form, so divider rail can be lined with top/bottom rail. The TOP of the divider rail will be brought in line with the top of bottom rail. The height of divider rail (76mm) will never be the same as the height of the bottom rail. For this type of window/door, please indicate align item 1 and item 2 at top, and bring divider rail of item 1 in line with bottom rail of item 2. 76,2 Item 1 Item 2? For this type of window/door, please indicate item 2 is x mm lower than item 1, bring divider rail of item 1 in line with bottom rail of item 2. 76,2 Item 1 Item 2 22
7. Hardware Hidden Hinge Fixation screw Lock screw Default Color: Optional color: Nickel Brass The hidden hinge give the shutters a modern and clean look. It also makes sure the construction is stronger in comparison with a contemporarily hinge. Note: When there has to be a cutout in hang strip, note that hinge may be in the way! Top view 16mm 3mm Height of Stile / Hang Strip 50mm 50mm 260mm Stile 100-450mm 17mm Specification Ecowood 2015 version 2 23
Button catch and lock for connecting panels Installing button catches makes the end result even better... (order separate). Also loose panels can be mounted vertically with button catches. Attention Loose panels which are mounted at an angle likewise (like roof windows) always need additional fixation in order to prevent the panels falling down! Material: Brass or Nickel plated The lock for connecting panels improves the usage of shutters and it gives a beatiful look (order separate). Material: Brass or Nickel plated 24
Window handle flat 15mm 28 50.8 63.5 15 25.4 51 11 28 50.8 63.5 5.6 15 80 25.4 Always support the panels at the bottom or install with button catches. Specification Ecowood 2015 version 2 25
8. Cutout in hang strips It is possible to order a cutout at the back of a hang strip (top and/ or bottom). The cutout cannot be deeper than the panel thickness of 26mm: Depth 26mm panel tickness Height panel tickness Height 26mm Depth It is also possible to order a cutout at the side of the hang strip (top and/ or bottom) In most cases the hinge at top / bottom will be cancelled: L R L R Height Height Width Width Width Width Height Height Minimum 10mm 26
9. Bi-fold track system General Components 27.4mm Aluminum top track aluminum color 25mm 31.2mm 8.8mm Default: Aluminum floor track type M in aluminum color, with predrilled holes. 8.8mm 19mm 13mm Option without surcharge: Aluminum floor track type U in aluminum color, with predrilled holes. Floor track type M will be provided with end cap. Specification Ecowood 2015 version 2 27
Floor track type U is developed to place IN the floor: 11mm Advised cut in the floor is 13,5mm width x 8mm depth. 10.4 41 20.6 Spring loaded guide Wheel carrier The tiltrod is not exactly in the center of the panel when ordering more than 2 hinged panels (offset = 7mm) or in case of floating bi-fold system (FF/FF), in order to make the total width of the package as small as possible. Topview 7mm 7mm 7mm 7mm 7mm 7mm 7mm 7mm L L L L R R R R 28
Bi-foldtrack system 90 Outside Mount 44mm 28mm 28mm 44mm 15mm 20mm 20mm 12mm Order width 12mm 9mm 76mm 9mm 89mm 38mm Order height 3mm 47mm 9mm 38mm 76mm 3mm 47mm 9mm 38mm 38mm 76mm 47mm 63mm 39mm 31mm Order height 47mm 63mm 51mm 43mm 89mm 18mm 89mm 31mm 19mm 114mm 5mm 19mm 114mm 18mm Bi-fold 90 + frame 76mm Bi-fold 90 + frame 89mm Installation tip: If possible, mount the upper frame to the ceiling, for more strength and ease of installation. Specification Ecowood 2015 version 2 29
Inside mount 19mm 5mm 15mm 5mm 44mm 1.5mm Order width 1.5mm 44mm 9mm 76mm 9mm 76mm 49mm 3mm 9mm 38mm 3mm 9mm 38mm 47mm 47mm 2mm Order height 2mm 47mm 63mm 39mm 31mm Order height 47mm 63mm 39mm 31mm 89mm 18mm 89mm 18mm 19mm 114mm 5mm 19mm 114mm 5mm Bi-fold 90 + frame 76mm Bi-fold 90 + frame 76mm 30
Inside mount without frame at top Can also be used for door opening: order in that case an extra wooden batten 25mm x 9mm x [order width]mm. 19mm 5mm 15mm 5mm 44mm 1.5mm Order width 1.5mm 44mm 9mm Order height 25mm 3mm 2mm 47mm 63mm 89mm 11mm 18mm 31mm 19mm 114mm 44mm Bi-fold 90 without frame Specification Ecowood 2015 version 2 31
Panel configurations for bi-fold track system 90 Possible panel configurations include: LL, RR, LLRR, LLLL, RRRR, LLRRRR, LLLLRR and LLLLRRRR. In addition, the floating bi-fold system can be provided. Difference is that there is no top/bottom pivot, instead of that are wheels in top track and spring loaded guide in floor track. This makes it possible to fold and slide free in 1 track. Writes F for floating panel, use a dash when the panels need to be split. The tilt rod will be offset 7mm to the right from center of panels if multi fold. The gap is 3mm where there are two panels meet without hinges. 32
Bi-fold track 180 Important note: 41mm stile is not available for this system. Outside mount (only option!) 44mm 28mm 28mm 44mm 15mm 20mm 20mm 12mm Order width 12mm 9mm 76mm 9mm 89mm 3mm 47mm 9mm Order height 38mm 38mm 76mm 3mm 47mm 9mm 38mm 38mm 76mm 47mm 63mm 39mm 31mm Order height 47mm 63mm 51mm 43mm 89mm 18mm 89mm 31mm 19mm 114mm 5mm 19mm 114mm 18mm Bi-fold 180 + frame 76mm Bi-fold 180 + frame 89mm Installation tip: If possible, mount the upper frame to the ceiling, for more strength and ease of installation. Specification Ecowood 2015 version 2 33
Panel configurations for bi-fold track system 180 Possible panel configurations include: LL, RR, LLRR. Other configurations are not available. In addition, the floating bi-fold system can NOT be provided. Example of LLRR 34
10. By-Pass System: Louvers closed position General The louvers have to be in closed position if sliding the doors in the track. Top view 2 panels with 1 overlap Overlap 4 panels with 2 overlaps Overlap Overlap 4 panels with 1 overlap Overlap Overlap: 31mm for 41mm stile, 40mm for 50mm stile. (Overlap = Stile width 10mm) Specification Ecowood 2015 version 2 35
The final panel width will be determined by the number of panels and its overlaps. Important note if the panel width exceeds 450mm it is strongly advised to use the floor track system (see chapter bi-fold track system). Thus the panels are locked completely, which prevents the panels touching each other. Also the panels will be straight relative to each other (2 floor tracks will be installed over the entire width). Mounting type Outside Mount 20mm 38mm 150mm Order width 140mm 102mm 19 51 70 38mm 39mm 114mm 19mm 28 Order height 47mm 63mm 46mm 38mm 89mm 25mm 35mm 114mm 13mm 13mm 36
Inside mount 38 114mm 63mm 126 1.5mm Order width 1.5mm 19 51 44 38mm 19mm 28mm Order height 47mm 63mm 89mm 21mm 13mm 0mm 35mm 114mm 13mm 13mm Specification Ecowood 2015 version 2 37
11. Open Bypass system: Louvers opened position General The louvers have to be in closed position if sliding the doors in the track. Boxout size and light block size will be different for 63mm louver and 89mm louver (Only available in 63mm and 89mm louver). Top view Light blocks will be installed in order to prevent to much light coming in. For this reason it is important to know up front in what position the panels have to be installed: 63mm Silent View Silent View 30mm 19mm 63mm 28 40mm 50mm 89mm 28 19mm 30mm 89mm 19mm 30mm 38
Example BFFB: from left to right it means 1 panel in the back, 2 panels in the front and 1 panel in the back track: Important note If the panel width exceeds 450mm it is strongly advised to use the floor track system (see chapter bi-fold track system). Thus the panels are locked completely, which prevents the panels touching each other. Also the panels will be straight relative to each other (2 floor tracks will be installed over the entire width). Specification Ecowood 2015 version 2 39
Mounting type Outside Mount (fascia returns included) 20mm 38mm 160mm 200mm Order height 102mm 19mm 25mm 19 63mm 28mm X 63mm Z 6mm 38 19mm 170mm Order width 20mm 38mm 38mm 114mm 210mm Order width Order height 102mm 19mm 25mm 19 89mm 28mm K 89mm L 6mm 38 22mm 38mm 114mm Center tilt rod Silent view K 114mm 92mm L 67mm 89mm X 90mm 70mm Z 51mm 71mm 40
Inside Mount (fascia returns included) 1.5mm 1.5mm 38mm 160mm 200mm Order height 19mm 25mm 19 63mm 28mm 170mm Order width 1.5mm 1.6mm 38mm 210mm Order width 63mm X 63mm Z 6mm 38 2mm 19mm Order height 63mm 19mm 25mm 19 89mm 28mm K 89mm L 6mm 38 2mm Center tilt rod Silent view K 114mm 92mm L 67mm 89mm X 90mm 70mm Z 51mm 71mm Specification Ecowood 2015 version 2 41
12. Special shapes (only for Ecowood) Possible shapes In Ecowood the raked forms can also be ordered from now on (so NO round or arch shapes). The order will still be limited to the standard available hang strips and T-posts so it more limited than the Primewood raked shapes! The best way to order special shapes is to make a drawing with the dimensions. If ordered a technical drawing will be provided to make an extra check. Offset tiltrod In most cases an offset tilt rod will be used for the raked shapes. The tilt rod will be installed 25mm from one of the ends of the louver. 42
13. Shutters with fixed louvers Possible options Closed Open Direction Dress Down Dress Up 47mm louver 63mm louver 89mm louver Back of panel Back of panel The louvers will be fixed with an extra louver pin between the louver and stile. There will be no tilt rod (is technically not possible). Specification Ecowood 2015 version 2 43
14. Remote control for Ecowood and Ecowood plus Panel height in mm Louver Min. panel height due to motor Distance between divider rail and top and/or bottom rail Min. Min. Ecowood Max. Ecowood Plus Max. 63mm 457mm 457mm 1879mm 1980mm 89mm 457mm 457mm 1879mm 1980mm Attention Operating the louvers manualy is only possible if the switch of the driver has released the clutch (at the back of the panel). 44
Special shapes Tilt rod Stile Louver sizes Guarantee Motor Solar Motor Solar panel Remote unit Programming Raked windows are available Only available in silent view, because the motor drives the gear system in the stile. Through this driving system one section can go up to 1879mm (Ecowood Plus 1980mm) without split up (split up of the silent view is not possible). Only in 57mm, because of the dimensions of the motor. 63 and 89mm 2 years 6 pcs. AA batteries (alkaline of lithium) 6 pcs. AA batteries (Rechargeable). Please fully charge before installation! Default installed on the battery box. With surcharge the solar panel can be installed on the bottom rail and also if 2 drivers are needed in 1 panel the 2 solar panels will be installed on the bottom rail. Installation on the divider rail is not possible due to the cables. 2 pcs. AAA batteries (alkaline of lithium) For programming and installing look at the user manual at jasno.com Receiver / driver Attention: protrudes 20mm Colors: white coffee caramel Dimensions 330 x 37 x 40 mm Manual switch Operating the louvers by hand is only possible if the clutch has been released with this switch. Mounting base (option) If solar remote is ordered, a mounting base can be attached to the bottom rail for this solar panel (this can only be done in production due to the cabling). Default the solar panel is attached to the battery box. Colors: white coffee caramel Dimensions 195 x 37 x 9 mm Battery box in driver Is covered with wood in the same color as shutter, unless the solar panel is mounted on the battery box. Extra battery box (option) Can be placed on the existing battery box ór on the mounting base. The solar panel can charge both battery boxes. Colors: white coffee caramel Dimensions 195 x 37 x 22 mm Solar panel (option) See above for more info. Colors: white coffee caramel Dimensions 195 x 37 x 14 mm Specification Ecowood 2015 version 2 45
The remote includes radio frequency. Calibration mode Angle keys For positioning the louvers. Group keys 5 groups can be controlled by one remote. By pressing ALL, all groups can be controlled simultaneous. One group can control unlimited number of motors that are in range. Activation button 46
Position solar panel The solar panel needs of course sufficient direct sunlight during the day. For that reason it is of utmost importance to check the following, before advising the solar panel: The solar panel will be targeting at a position between southeast and southwest, after installation. Most smartphones have a compass function these days to determine the position. The window where the solar panels have to be installed will not have other window covering products at the inside or outside, like awnings, sunshade, screens, sun blinds etcetera, preventing the solar panel from being charged by the direct sunlight. The window glass has no special sun resisting coating or foil. The solar panel has a clear view to the window glass, within 15cm of the window glass. The solar panel can not be installed behind a frame style or door sill. Solar not possible Solar not possible Solar possible The solar panel charges the rechargeable batteries if direct sunlight can reach the solar panel. Rechargeable batteries also have a limited life, so they also need to be replaced from time to time. That depends on the quantity of direct sunlight and usage of the motor. If the use of solar panel is not possible, it is recommended to use the motor with normal batteries. Specification Ecowood 2015 version 2 47
The driver(s) on hinged panels are positioned as in the following drawings. It is important to know that the panels can not fold together completely, while the driver protrudes 20mm. L R LL / RR / FF 20mm LLRR / LLLL / RRRR LLLLLL / RRRRRR To make sure the panels can folded as complete as possible, the drivers are placed at a different height in case of two or more hinged panels. Placing the drivers at the same height is a no-cost option. In bypass track systems the driver will placed as follows: 48
Color coordination chart Shutter Driver, solar panel, mounting base, extra battery box 001 Pure White White 002 Extra White White 003 Silk White White 004 Bright White White 006 Pearl White 008 Marshmallow White 009 Creamy White 011 Cameo White 013 Bisque White 019 String White 023 White Dove White 027 White Birch White 037 Pointed White White 048 Chai Coffee 049 Stone Grey Coffee 051 Brown Grey Coffee 053 Clay Coffee 836 Classic Black Coffee White Coffee Specification Ecowood 2015 version 2 49
15. Frame/Track splice For frame, track (top/ Bottom) or plain fascia, if the length exceeds 3600mm, they will be split in two pieces. 16. Manufacture time After confirmation of the order, the shutters will be directly put into manufacturing. Adjustments after confirmation cannot be made without extra costs. Delivery time will given after confirmation of the order. 17. Package The Maximum weight per Box is 40kg. 18. Extra louvers 2 extra louvers will be supplied for each shutter. For the shutters with different panel width, will supply 2 extra louvers for each width. 50