atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve solution simplifies wiring with the use of 5 pin connectors or fieldbus systems. orts 7 on manifolds 3/8 Inch on end plates ounting anifold Solenoids V,.0 watt ertification / approval I65 rated / ark: ccording to 6 000-6- aterial specifications ody nd plates Fasteners anifolds Spool Spool enclosure ilot configuration olyamide reinforced fiberglass luminum Zinc plated steel luminum rass and nitrile rubber rass anifolds can be configured for either internal or external pilot in the field. Side ported manifolds are configured for internal pilot when the 7 plug is located in the x port on the front of the right hand end plate. oving this plug to the inside of the right hand end plate and replacing it with a fitting allows an external pilot to be used. ottom ported manifolds are configured for internal pilot when the 7 plug is located in the x port on the bottom of the right hand end plate. oving this plug to the inside of the right hand end plate and replacing it with a fitting allows an external pilot to be used. Operating information Operating pressure: Vacuum to 5 SI (Vacuum to 0 bar) ilot pressure requirements: Valve number inimum pilot pressure aximum pilot pressure VX09 0 SI 0 SI VX09 5 SI 0 SI 5VX09 5 SI 0 SI VX09 0 SI 0 SI VX09 0 SI 0 SI VX09 0 SI 0 SI Temperature range: xternal ilot x Internal ilot x Internal ilot 5 F to 0 F (-5 to 9 ) xternal ilot X ISOX ual 3/ valves replace 3-position valves for better performance 3-position center exhaust traditional 5/3 center exhaust valve is now replaced by a double 3/ + valve module. oth cylinder chambers are exhausted and rod and piston are free to move. 3 3-position pressure center traditional 5/3 pressure center valve is now replaced by a double 3/ O+O valve module. The function is identical. 3 ost popular. 3 neumatic ivision
atalog 000-3US Valves Symbol Type v Operator # # 5 3 -way, -position 0.35 Single solenoid VX09 # # 5 3 5 3 Operator / Function 5 # # 5 3 5 ort, ual 3/, / # # 5 3 5 ort, ual 3/, O / O # # 5 3 5 ort, ual 3/, O / -way, -position 0.35 ouble solenoid VX09 -way, 3-position, all ports blocked 0.3 ouble solenoid 5VX09 3-way, -position, dual valve, / 0.35 ouble solenoid VX09 3-way, -position, dual valve, O/O 0.35 ouble solenoid VX09 3-way, -position, dual valve, O/ 0.35 ouble solenoid VX09 lanking plate / / VX00XX X ISOX anifold ases Intermediate air supply / / VX00XX s lug-in valve manifolds Side port ottom port Single solenoid outputs only S S ouble or single solenoid outputs S S Internal ilot nd late Kits lectrical option orting Side port ottom port 5-pin, -sub T SL5 SL6 S SL SL Turck fieldbus with valve driver module - 6 outputs T ST5 ST6 S ST ST Turck fieldbus with valve driver module - 3 outputs 6 outputs Isysnet with valve driver module Isysnet with valve driver module and bus extension connector Isysnet with valve driver module and V connector Isysnet with valve driver module, bus extension connector and V connector T ST5 ST6 S ST ST T S5 S6 S S S T SL65 SL66 S SL6 SL6 T S55 S56 S S5 S5 T S65 S66 S S6 S6 T S75 S76 S S7 S7 neumatic ivision
atalog 000-3US Simple anifold ssemblies Includes a valve manifold with valves and fittings installed. nd lates must be ordered separately. 9 0 3 5 6 S3 7 7 7 7 ase style -Station manifold with valve and / or fitting S3 ounting style Side ported ottom ported 0,,, 6 Fitting 0 Without fitting Straight fitting for 5/3 inch or mm O tube 6 Straight fitting for 6mm O tube 7 Straight fitting for / inch O tube lug for blanking module nclosure / Lead length Single address circuit board ouble address circuit board ngineering level urrent OL OTIOS R OST OULR. 9,, 3, 5 Valve type * ouble solenoid, dual 3/, / * ouble solenoid, dual 3/, O/O * ouble solenoid, dual 3/, end O - end Single solenoid, -position - air return, spring assist * ouble solenoid, -position 5* ouble solenoid, 3-position - ** lanking module Intermediate air supply module * Requires double address circuit board, enclosure. ** Requires fitting. X ISOX Valve osition - haracter 9 Fitting osition - haracter 0 Valve osition - haracter 3 Fitting osition - haracter Valve osition - haracter Fitting osition - haracter Valve osition - haracter 5 Fitting osition - haracter 6 5 neumatic ivision
atalog 000-3US ow To Order lug-in dd--fold ssemblies. List dd--fold ssembly call out. This automatically includes the end plate kit assembly.. List Simple anifold ssemblies. List left to right, LOOKI T T YLIR ORTS on the manifold. aximum umber of Solenoids (aximum nergized Simultaneously) 5-pin -sub Isysnet* Turck 6 Outputs 3 Outputs V () 6 (6) 3 (3) 6 (6) 3 (3) * aximum of 3 solenoids per manifold. With us xtension functionality, manifolds with up to 3 solenoids each can be connected on the same network. X ISOX dd--fold ssembly odel umber Valve series Isys micro add-a-fold S Threads T Threads 3 0 0 0 0 nd plate option Turck fieldbus with valve driver module - 6 outputs Turck fieldbus with valve driver module - 3 outputs 5-pin, -sub - outputs Isysnet with valve drive module - 3 outputs Isysnet with valve drive module and bus extension connector - 3 outputs Isysnet with valve drive module and V connector - 3 outputs Isysnet with valve drive module and bus extension and V connector - 3 outputs - 6 outputs Isysnet and communication modules must be ordered separately. nd plate type S side port, internal pilot S bottom port, internal pilot S side port, external pilot 3 S bottom port, external pilot T side port, internal pilot 5 T bottom port, internal pilot 6 T side port, external pilot 7 T bottom port, external pilot 8 umber of stations* Valve manifold 0 8 Valve manifold 08 Valve manifold 6 Valve manifold 6 0 Valve manifold 0 Valve manifold 8 Valve manifold 8 3 Valve manifold 3 * For an dd--fold part number to be valid, all stations must have a corresponding electrical connection at the end plate. See aximum umber of Solenoids chart. ote: S fittings can only be used with S anifolds. T fittings can only be used with T anifolds. Y W X Z T ilot exhaust on end plate 0 Without fitting uffler Straight fitting for mm O tube Straight fitting for 6 6mm O tube 7 S Threads Straight fitting for 5/3 inch O tube T Straight fitting for Threads / inch O tube 3/8" exhaust on end plate 0 Without fitting uffler 8 Straight fitting for 8mm O tube S Straight fitting for 0mm O tube Threads 7 Straight fitting for / inch O tube T 9 Straight fitting for 3/8 inch O tube Threads 3/8" inlet port on end plate 7 pilot port on end plate Internal pilot end plate 0 With standard plug xternal pilot end plate 0 Without fitting Straight fitting for mm O tube S 6 Straight fitting for 6mm O tube Threads Straight fitting for 5/3 inch O tube T 7 Straight fitting for / inch O tube Threads 0 Without fitting 8 Straight fitting for 8mm O tube S Straight fitting for 0mm O tube Threads 7 Straight fitting for / inch O tube T 9 Straight fitting for 3/8 inch O tube Threads 6 neumatic ivision
atalog 000-3US 5-pin, -Sub anifolds Single Solenoid Valves anifold # anifold # anifold #3 anifold # anifold #5 anifold #6 dd--fold anifold is factory assembled and tested for pneumatic leaks and electrical continuity. Item ty escription 0 0 6 valve dd--fold with end plates valve simple manifold slices #-6 590 S37777 omponent Level Item ty escription 0 5-pin, -sub, end plate SL5 0 Single solenoid valve VX09 03 6 anifold, side ported, single address S 0 50 /" Tube fittings (in box quantity) S56795 05 0 3/8" Tube fittings (in box quantity) S568338 06 3/8" xhaust muffler 6-3 07 /8" xhaust muffler 6- Sandwich Regulator Flow ontrols escription ommon port regulator, 5 to 5 SI with gauge escription mm to mm or 5/3" to 5/3" O tube Kit number SRX6 ote: v values are reduced when using a sandwich regulator to 0.0 for -position and ual 3/ valves, and 0.7 for 3-position valves. ote: The sandwich regulator passes full pilot pressure from the manifold, allowing the regulated pressure to adjusted down to 5 SI without affecting valve functionality. ufflers escription /8" pilot exhaust S or T 6-3/8" main exhaust S or T 6-3 7 bottom port pilot exhaust (must be ordered in multiples of 0) S568800 Kit number F800-5/3 /" to /" O.. tube F800-5-pin, -Sub able (Female) escription Length 5-pin, -sub cable, I0 3 meters 8L53 5-pin, -sub cable, I0 9 meters S59 5-pin, -sub cable, I65 3 meters S53W 5-pin, -sub cable, I65 9 meters S59W Fittings ust be ordered in multiples of 0 Thread Tube O.. anifold or pilot supply ports straight 7 mm or 5/3" S56790 7 6mm S567906 7 /" S56795 ain inlet or exhaust ports 3/8" T /" S56835 3/8" T 3/8" S568338 3/8" S 8mm S568308 3/8" S 0mm S56830 ilot exhaust ports /8" T 5/3" S5685 /8" T /" S5685 /8" S mm S5680 /8" S 6mm S56806 X ISOX 7 neumatic ivision
atalog 000-3US ultiple ressure Zones S000 ll ports open. ommon pressure for front and rear manifold. ommon exhausts. Standard gasket included with each manifold and end plate. ommon xhaust Open S000 Rear manifold blocked for separate pressure supply. ommon exhausts. Flip gasket to block front of manifold. ommon xhaust Open ain ressure for ack Row Open S000 ain ressure for Front Row Open S000 ain ressure for ack Row locked ain ressure for Front Row Open Internal ilot ressure from Inlet S000 Intermediate ir Supply Zone S000 xhaust Inlet * ty. () S000 askets are required. xhaust xhaust Inlet xhaust Inlet X ISOX Inlet S0003 Rear manifold blocked for separate pressure supply. xhaust blocked also. Flip gasket to block front of manifold. If used with bottom ported end plates, second exhaust must be piped from the side of the right end plate. ommon xhaust locked Inlet * Inlet S000 ll galleys blocked. Two pressure zones and two exhaust zones. If used with bottom ported end plates, second exhaust must be piped from the side of the right end plate. ommon xhaust locked ain ressure for ack Row locked ain ressure for Front Row Open Internal ilot ressure from Inlet ain ressure for ack Row locked ain ressure for Front Row locked Internal ilot ressure from Inlet ressure S0003 Intermediate ir Supply Zone S000 xhaust S0003 Zone S000 S000 ressure Intermediate ir Supply Zone S000 S000 xhaust Zone S000 xhaust Inlet Inlet xhaust Inlet xhaust Inlet Inlet xhaust Inlet xhaust xhaust xhaust xhaust Inlet Inlet Inlet Inlet * 8 neumatic ivision
atalog 000-3US anifold to anifold askets* Valve Labels* escription ll galleys passing S000 escription Single solenoid diagram ouble solenoid diagram S00 S00 ain pressure to rear or front valves blocked, exhaust passing ain pressure to rear or front valves blocked, exhaust blocked S000 S0003 ouble solenoid diagram ouble solenoid diagram ual 3/ / ouble solenoid diagram ual 3/ O/O ouble solenoid diagram ual 3/, end O, end *Includes 0 Labels. S005 S00 S00 S00 * Includes asket ll galleys blocked S000 Replacement Solenoid Kit escription V solenoid kit with screws S000 Replacement Screws escription Set of 0 manifold to manifold 3 screws S00 Replacement Override aps escription Set of 0 manual override caps S00 Replacement Regulator auge escription 5 to 5 SI auge 05660 X ISOX Replacement askets and Valve Screws escription Replacement rotective over escription Set of 5 valve to manifold gaskets and 0 screws S00 rotective olyester over Set of 0 S5706 Replacement lugs escription Set of 0 7 plugs (art o. S567900) for auxiliary and pilot pressure ports S003 9 neumatic ivision
atalog 000-3US imensions 5-pin, -Sub with Valves, Side orted imensions.88..95 (.0) (.0) (75.0). (3.0) F.0 (6.0) 0.7 (8.0).65 (.0) 0.9 (.5).8 (58.0) 0. (0.5) K 3. (87.5) 0. (6.) n = umber of manifolds 0. (5.) X ISOX 5-pin, -Sub with Valves, ottom orted Side orted imensions x x.88..95 (.0) (.0) (75.0). (3.0) F.0 (6.0) 0.7 (8.0).65 (.0) 0.9 (.5) x x.8 (58.0) 0. (5.3) K 3. (87.5) 0.6 (5.8) S T 0.6. (6.0) (9.0) L.69 (3.0).03 (6.3) U 3.73 (9.9) n = umber of manifolds 0. (6.) R.5 (36.8) V.3 (07.) ottom orted etail ote: See Section for the dimensions of manifolds utilizing the Isysnet, Turck, or end plate type. 0 neumatic ivision
atalog 000-3US imensions Isysnet with Valves, Side orted imensions n = umber of anifolds m = umber of odules 5.67 (.0) 0.9 (.5).88 (.0).7 (69.0). (.0) K 7.3 (86.0) 5. (33.0) 0. (6.).0 (0.0).83 (7.0).95 (75.0).8 (6.0).65 (.0) R.7 (0.0) 0.9 (3.0) S.0 (5.0) 0.7 (8.0) T.0 (5.0) Isysnet with Valves, ottom orted X ISOX n = umber of anifolds m = umber of odules imensions 5.67 (.0).7 (69.0).88 (.0) K 7.3 (86.0). (.0) L.69 (3.0) 5. (33.0) 0. (6.).0 (0.0).83 (7.0).95 (75.0).8 (6.0).65 (.0) R.7 (0.0) 0.9 (3.0) S.0 (5.0) 0.7 (8.0) T.0 (5.0) 0.9 (.5) U. () neumatic ivision
atalog 000-3US imensions with Valves, Side orted imensions.88..95 (.0) (.0) (75.0).65 (.0). (3.0).8 (58.0).36 (60.0) F.8 (3.5) 0.7 (8.0) K 6.0 0. (55.0) (6.).07 (5.55) n = umber of manifolds 0.9 (.5).0 (6.0) X ISOX with Valves, ottom orted imensions.88..95 (.0) (.0) (75.0). (3.0).8 (58.0).0 (6.0) F.0 (6.0) 0.7 (8.0) K L 6.0.69 (55.0) (3.0).36 (60.0).07 (5.55) n = umber of manifolds.65 (.0) 0.9 (.5) 0. (6.) neumatic ivision
atalog 000-3US imensions Turck with Valves, Side orted 3 imensions 7.8 (90) F.8 (3.5) K.6 (3).65 () 5.5 (0) 3.79 (96.5) L.5 (6).9 (.9) 5.7 (5) 0.0 (5) 5.06.53 (8.5) (6.5) See note R. ().8 (58) S.88 () ote : =+L+n xk, where n = umber of Turck input / output modules X ISOX 3 neumatic ivision