Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, Parker utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Parker utoclave a reputation for reliable and efficient product performance. Parker utoclave ngineers has long been established as the worldwide leader in high pressure fluid handling components for the chemical/petrochemical, research, oil and gas, waterjet, and waterblast industries. www.autoclave.com Needle Valves - High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series
Needle Valves - High Pressure High Pressure Valve eatures Tubing sizes from /4 to. Non-rotating stem prevents stem/seat galling. Rising stem/barstock body design. etal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance. or dependable stem and body sealing 30S, 43S and 30V valves are furnished with PT encapsulated packing; the 40V and 60V valves feature nylon/leather packing below threads. sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque. hoice of Vee or Regulating stem tips. Series 00V: Pressures to 00,000 psi (6895 bar) features: old-worked type 36 or 5-5PH stainless steel body with aluminum bronze packing gland and non-rotating stem. Nylon and leather packing below stem threads. Series 50V: Pressures to 50,000 psi (0342 bar) features: ylindrical body of high strength 5-5PH stainless steel with stainless steel packing gland. Tool steel nonrotating stem with replaceable seat of nickel maraging steel. must be actuated with torque wrench (refer to Tools, Installation, Operation and aintenance section). Wedge-type PT and leather packing below stem threads with beryllium-copper utoclave nti-xtrusion ack up Rings. Vee stem tip only Parker utoclave ngineers valves are complemented by a complete line of high pressure fittings and tubing. The high pressure series uses Parker utoclave ngineers' coned-and-threaded connections for dependable performance in gas or liquid service. 2 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valves - S Series Pressures to 43,000 psi (2965 bar) Pressure Rating iameter Orifice psi (bar) Size onnection Size Rated @ Room Inches Inches (mm) v * Temperature** Series 30S 00043.438 (.2) 2.6 30,000 (2068) Series 43S 00043.438 (.2) 2.6 43,000 (2965) Notes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. eneralized low oefficient urves ( v ) 7 STINLSS STL T-HNL LOW RITION LUINU RONZ PKIN LN LOKIN VI NTI-XTRUSION NON-ROTTIN K-UP RINS ST JUSTL PKIN LOW THRS OL WORK TYP 36 SS OY IN TWO PTTRNS HIH PRSSUR ON N THR ONNTIONS HOI O V TL-TO-TL OR RULTIN STIN ST TIP To ensure proper fit use utoclave tubing Number of turns open 6 5 4 3 2 0 0 Regulating Vee 20 30 40 50 60 70 80 90 00 % of rated v Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact your Sales Representative. The 30S Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: 30S607 30S 6 07 XX Valve Series 30S 43S iameter Size /Seat 6-07 - non-rotating Vee stem (on-off service) 08 - non-rotating regulating stem (tapered tip for regulating and shutoff) 87 - Vee stem with replaceable seat 88 - Regulating stem with replaceable seat ody Pattern - two-way straight 2 - two-way angle Options or extreme temperature and other options, see Valve Options. ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Valve Options xtreme Temperatures Standard Parker utoclave ngineers valves with PT packing may be operated from 0 (-7.8 ) to 450 (232 ). High temperature packing is available for service from -423 (-252 ) to 200 (649 ) by adding the following suffixes to catalog order number. T - standard valve with PT glass packing to 600 (36 ). Y - standard valve with graphite braided yarn packing to 800 (427 ). 8,000 psi (569 bar) max. HT - extended stuffing box valve with graphite braided yarn packing to 200 (649 ). - standard valve with cryogenic trim material and PT packing to -00 (-73 ). LT - extended stuffing box valve with PT packing & ryogenic trim materials to -423 (-252 ). K - anti-vibration collet and gland assembly. Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: R30S607) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found in the valve drawing or contact your Sales Representative for information. onsult your Parker utoclave ngineers representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 30S607 V 0.438 4.3 2.06 0.72 3.50 2.75 4.44 0.25.62 0.56 8.42.25.2.75 30S608 R (25.40) (.2) (04.90) (52.32) (8.28) (88.90) (69.85) (2.77) (260.35) (4.4) (4.22) (23.86) (3.75) (28.44) (44.45) 43S607 V 0.438 4.88 2.44 0.72 3.50 2.75 4.44 0.25.62 0.56 8.42.25.2 2.25 43S608 R (25.40) (.2) (23.96) (6.96) (8.28) (88.90) (69.85) (2.77) (260.35) (4.4) (4.22) (23.86) (3.75) (28.44) (57.5) 2-Way ngle 30S6072 V 0.438 4.3 2.06 0.72 2.75 5.2 0.25.62 0.56 9.35.25.2.75 30S6082 R (25.40) (.2) (04.90) (52.32) (8.28) (69.85) (30.04) (260.35) (4.4) (4.22) (237.49) (3.75) (28.44) (44.45) 43S6072 V 0.438 4.88 2.44 0.72 2.75 5.2 0.25.62 0.56 9.35.25.2 2.25 43S6082 R (25.40) (.2) (23.96) (6.96) (8.28) (69.85) (30.04) (260.35) (4.4) (4.22) (237.49) (3.75) (28.44) (57.5) 2-Way ngle/replaceable Seat 30S6872 V 30S6882 R 43S6872 V 43S6882 R 0.438 4.3 2.06 0.72 2.75 4.3 5.24 0.25.62 0.56 0.56.25.2.75 (25.40) (.2) (04.90) (52.32) (8.28) (7.37) (09.47) (33.35) (260.35) (4.4) (4.22) (268.22) (3.75) (28.44) (44.45) 0.438 4.88 2.44 0.72 2.75 4.3 5.24 0.25.62 0.56 0.56.25.2 2.25 (25.40) (.2) (23.96) (6.96) (8.28) (7.37) (09.47) (33.35) (260.35) (4.4) (4.22) (268.22) (3.75) (28.44) (57.5) igure igure 2 igure 3 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure igure 2 igure 3 N N H H 2-Way ngle 2-Way ngle / Replaceable Seat 4 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valves - 30V Series Pressures to 30,000 psi (2068 bar) Pressure Rating iameter Orifice psi (bar) Size onnection Size Rated @ Room Inches Inches (mm) v * Temperature** /4 250 0.094 (2.39) 0.2 30,000 (2068) 3/8 375 0.25 (3.8) 0.23 30,000 (2068) 9/6 562 0.25 (3.8) 0.33 30,000 (2068) Notes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. eneralized low oefficient urves ( v ) 7 LUINU RONZ PKIN LN OL WORK TYP 36 SS OY IN IV PTTRNS NON-ROTTIN ST NTI-XTRUSION K-UP RINS POWR OT STINLSS STL HNL LOKIN VI JUSTL PKIN LOW THRS Number of turns open 6 5 4 3 2 Regulating HOI O V OR RULTIN ST TIP TL-TO-TL STIN HIH PRSSUR ON-N-THR ONNTIONS 0 0 Vee 20 30 40 50 60 70 80 90 00 To ensure proper fit use utoclave tubing % of rated v Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact your Sales Representative. The 30V Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: 30V407 30V Valve Series 4 iameter Size 4-/4 6-3/8 9-9/6 07 /Seat 07 - non-rotating Vee stem (on-off service) 08 - non-rotating regulating stem (tapered tip for regulating and shutoff) 87 - Vee stem with replaceable seat 88 - Regulating stem with replaceable seat ody Pattern - two-way straight 2 - two-way angle 3 - three-way, two on pressure 4 - three-way, one on pressure 5 - three-way, two-stem manifold valve XX Options or extreme temperature and other options, see Valve Options. ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Valve Options xtreme Temperatures Standard Parker utoclave ngineers valves with PT packing may be operated from 0 (-7.8 ) to 450 (232 ). High temperature packing is available for service from -423 (-252 ) to 200 (644 ) by adding the following suffixes to catalog order number. T - standard valve with PT glass packing to 600 (36 ). Y - standard valve with graphite braided yarn packing to 800 (427 ). HT - extended stuffing box valve with graphite braided yarn packing to 200 (649 ). - standard valve with cryogenic trim material and PT packing to -00 (-73 ). LT - extended stuffing box valve with PT packing & ryogenic trim materials to -423 (-252 ). K - anti-vibration collet and gland assembly. Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: R30V407) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found in the valve drawing or contact your Sales Representative for information. onsult your Parker utoclave ngineers representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 30V407 V 30V408 R 30V607 V 30V608 R 30V907 V 30V908 R 2-Way ngle 30V4072 V 30V4082 R 30V6072 V 30V6082 R 30V9072 V 30V9082 R 3-Way / 2 on Pressure 30V4073 V 30V4083 R 30V6073 V 30V6083 R 30V9073 V 30V9083 R /4 0.094 2.00.00 0.50.50.2 2.00 3.00.00 0.22 4.62 0.69 0.38.00 (6.35) (2.39) (50.80) (25.40) (2.70) (38.0) (28.45) (50.80) (76.20) (25.40) (5.59) (7.35) (7.53) (9.65) (25.40) 3/8 0.25 2.00.00 0.53.50.2 2.00 3.00.00 0.22 4.68 0.69 0.38.00 (9.53) (3.8) (50.80) (25.40) (3.46) (38.0) (28.45) (50.80) (76.20) (25.40) (5.59) (8.87) (7.53) (9.65) (25.40) 9/6 0.25 2.62.3 0.8.56.2 2.44 3.00.00 0.28 5.06 0.69 0.38.50 (4.29) (3.8) (66.55) (33.27) (20.57) (39.62) (28.45) (6.98) (76.20) (25.40) (7.) (28.52) (7.53) (9.65) (38.0) /4 0.094 2.00.00 0.50.2 2.00 3.00.00 0.22 4.62 0.69 0.38.00 (6.35) (2.39) (50.80) (25.40) (2.70) (28.45) (50.80) (76.20) (25.40) (5.59) (7.35) (7.53) (9.65) (25.40) 3/8 0.25 2.00.00 0.53.2 2.2 3.00.00 0.22 4.74 0.69 0.38.00 (9.53) (3.8) (50.80) (25.40) (3.46) (28.45) (53.85) (76.20) (25.40) (5.59) (20.40) (7.53) (9.65) (25.40) 9/6 0.25 2.62.3 0.8.2 2.44 3.00.00 0.28 5.06 0.69 0.38.50 (4.29) (3.8) (66.55) (33.27) (20.57) (28.45) (6.98) (76.20) (25.40) (7.) (28.52) (7.53) (9.65) (38.0) /4 0.094 2.00.00 0.50.50.2 2.2 3.00.00 0.22 4.74 0.69 0.38.00 (6.35) (2.39) (50.80) (25.40) (2.70) (38.0) (28.45) (53.85) (76.20) (25.40) (5.59) (20.40) (7.53) (9.65) (25.40) 3/8 0.25 2.00.00 0.53.50.2 2.50 3.00.00 0.22 5.2 0.69 0.38.00 (9.53) (3.8) (50.80) (25.40) (3.46) (38.0) (28.45) (63.50) (76.20) (25.40) (5.59) (30.05) (7.53) (9.65) (25.40) 9/6 0.25 2.62.3 0.8.56.2 2.88 3.00.00 0.28 5.49 0.69 0.38.50 (4.29) (3.8) (66.55) (33.27) (20.57) (39.62) (28.45) (73.5) (76.20) (25.40) (7.) (39.45) (7.53) (9.65) (38.0) igure igure 2 igure 3 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products.onsult factory. igure igure 2 igure 3 2-Way ngle 3-Way / 2 on Pressure 6 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 3-Way / on Pressure 30V4074 V 30V4084 R 30V6074 V 30V6084 R 30V9074 V 30V9084 R 2-Way ngle / Replaceable Seat 30V4872 V 30V4882 R 30V6872 V 30V6882 R 30V9872 V 30V9882 R 3-Way / 2- anifold 30V4075 V 30V4085 R 30V6075 V 30V6085 R 30V9075 V 30V9085 R /4 0.094 2.00.00 0.50.2 2.00 3.00.00 0.22 4.62 0.69 0.38.00 (6.35) (2.39) (50.80) (25.40) (2.70) (28.45) (50.80) (76.20) (25.40) (5.59) (7.35) (7.53) (9.65) (25.40) 3/8 0.25 2.00.00 0.53.2 2.2 3.00.00 0.22 4.74 0.69 0.38.00 (9.53) (3.8) (50.80) (25.40) (3.46) (28.45) (53.85) (76.20) (25.40) (5.59) (20.40) (7.53) (9.65) (25.40) 9/6 0.25 2.62.3 0.8.2 2.44 3.00.00 0.28 5.2 0.69 0.38.50 (4.29) (3.8) (66.55) (33.27) (20.57) (28.45) (6.98) (76.20) (25.40) (7.) (30.05) (7.53) (9.65) (38.0) /4 0.094 2.00.00 0.50.2 2.06 2.38 3.00.00 0.22 5.80 0.69 0.38.00 (6.35) (2.39) (50.80) (25.40) (2.70) (28.45) (52.32) (60.45) (76.20) (25.40) (5.59) (47.32) (7.53) (9.65) (25.40) 3/8 0.25 2.00.00 0.53.2 2.3 2.38 3.00.00 0.22 6.05 0.69 0.38.00 (9.53) (3.8) (50.80) (25.40) (3.46) (28.45) (58.67) (60.45) (76.20) (25.40) (5.59) (53.67) (7.53) (9.65) (25.40) 9/6 0.25 2.62.3 0.8.9 2.62 2.44 3.00.00 0.28 6.45 0.69 0.38.50 (4.29) (3.8) (66.55) (33.27) (20.57) (30.23) (66.55) (6.98) (76.20) (25.40) (7.) (63.83) (7.53) (9.65) (38.0) /4 0.094 2.00.00 0.50.53.2 3.06 3.00.00 0.22 5.68 0.69 0.38.00 (6.35) (2.39) (50.80) (25.40) (2.70) (38.86) (28.45) (77.72) (76.20) (25.40) (5.59) (44.27) (7.53) (9.65) (25.40) 3/8 0.25 2.00.00 0.53.62.2 3.25 3.00.00 0.22 5.87 0.69 0.38.00 (9.53) (3.8) (50.80) (25.40) (3.46) (4.5) (28.45) (82.55) (76.20) (25.40) (5.59) (49.0) (7.53) (9.65) (25.40) 9/6 0.25 2.62.3 0.8.88.2 3.75 3.00.00 0.28 6.37 0.69 0.38.50 (4.29) (3.8) (66.55) (33.27) (20.57) (47.75) (28.45) (95.25) (76.20) (25.40) (7.) (6.80) (7.53) (9.65) (38.0) igure 4 igure 5 igure 6 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave engineers stock select products. onsult factory. igure 4 3-Way / on Pressure igure 5 N H 2-Way ngle / Replacable Seat igure 6 3-Way / 2- anifold ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Needle Valves - 40V Series Pressures to 40,000 psi (2760 bar) Pressure Rating iameter Orifice psi (bar) Size onnection Size Rated @ Room Inches Inches (mm) v * Temperature** 9/6 56240 0.09 (2.77) 0.28 40,000 (2760) Notes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. eneralized low oefficient urves ( v ) 7 LUINU RONZ PKIN LN POWR OT STINLSS STL HNL 6 OL WORK TYP 36 SS OY IN TWO PTTRNS NON-ROTTIN ST NTI-XTRUSION K-UP RINS LOKIN VI JUSTL PKIN LOW THRS Number of turns open 5 4 3 2 Regulating HOI O V OR RULTIN ST TIP TL-TO-TL STIN HIH PRSSUR ON-N-THR ONNTIONS 0 0 20 30 40 50 60 70 80 90 00 % of rated v Vee To ensure proper fit use utoclave tubing Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see Needle Valve Options Section or contact your Sales Representative. The 40V Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: 40V907 40V Valve Series 9 iameter Size 07 /Seat 9-9/6 07 - non-rotating Vee stem (on-off service) 08 - non-rotating regulating stem (tapered tip for regulating and shutoff) ody Pattern - two-way straight 2 - two-way angle 5 - three-way, two-stem manifold valve XX Options or extreme temperature and other options, see Valve Options. 8 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options xtreme Temperatures Standard Parker utoclave ngineers valves with PT packing may be operated from 0 (-7.8 ) to 450 (232 ). High temperature packing is available for service from -423 (-252 ) to 200 (649 ) by adding the following suffixes to catalog order number. T - standard valve with PT glass packing to 600 (36 ). note below. Y - standard valve with graphite braided yarn packing to 800 (427 ). HT - extended stuffing box valve with graphite braided yarn packing to 200 (649 ). - standard valve with cryogenic trim material and PT packing to -00 (-73 ). LT - extended stuffing box valve with PT packing & ryogenic trim materials to -423 (-252 ). K - anti-vibration collet and gland assembly. Note: 40V and 60V valves supplied with Peak/PT lass/peek Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: R40V907) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found in the valve drawing or contact your Sales Representative for information. onsult your Parker utoclave ngineers representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 40V907 V 9/6 0.09 2.62.3 0.72.75.3 2.50 3.00.00 0.28 5.06 0.69 0.38.50 40V908 R (4.3) (2.77) (66.55) (33.27) (8.29) (44.45) (33.27) (63.50) (76.20) (25.40) (7.) (28.52) (7.53) (9.65) (38.0) igure 2-Way ngle 40V9072 V 9/6 0.09 2.62.3 0.72.3 2.8 3.00.00 0.28 5.37 0.69 0.38.50 40V9082 R (4.3) (2.77) (66.55) (33.27) (8.29) (33.27) (7.37) (76.20) (25.40) (7.) (36.40) (7.53) (9.65) (38.0) igure 2 3-Way / 2 anifold 40V9075 V 9/6 0.09 2.62.3 0.72 2.06.3 4.2 3.00.00 0.28 6.59 0.69 0.38.50 40V9085 R (4.3) (2.77) (66.55) (33.27) (8.29) (52.32) (33.27) (04.65) (76.20) (25.40) (7.) (67.39) (7.53) (9.65) (38.0) igure 3 2-Way ngle / Replaceable Seat 40V9872 V 40V9882 R 9/6 0.09 2.62.3 0.72.3 2.68 2.62 3.00.00 0.28 6.90 0.69 0.38.50 (4.29) (2.77) (66.55) (33.27) (8.29) (33.27) (68.07) (66.55) (76.20) (25.40) (7.) (75.26) (7.53) (9.65) (38.0) igure 4 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure igure 2 igure 3 igure 4 H N 2-Way ngle 3-Way / 2 anifold 2-Way ngle / Replaceable Seat ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
Needle Valves - 60V Series Pressures to 60,000 psi (437 bar) Pressure Rating iameter Orifice psi (bar) Size onnection Size Rated @ Room Inches Inches (mm) v * Temperature** /4 250 0.062 (.57) 0.08 60,000 (437) 3/8 375 0.062 (.57) 0.09 60,000 (437) 9/6 562 0.078 (.98) 0.4 60,000 (437) Notes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. eneralized low oefficient urves ( v ) LUINU RONZ PKIN LN POWR OT STINLSS STL HNL 7 OL WORK TYP 36 SS OY IN IV PTTRNS 6 NON-ROTTIN ST NTI-XTRUSION K-UP RINS LOKIN VI JUSTL PKIN LOW THRS Number of turns open 5 4 3 2 Regulating HOI O V OR RULTIN ST TIP TL-TO-TL STIN HIH PRSSUR ON-N-THR ONNTIONS 0 0 Vee 20 30 40 50 60 70 80 90 00 To ensure proper fit use utoclave tubing % of rated v Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact your Sales Representative. The 60V Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: 60V407 60V Valve Series 4 iameter Size 4-/4 6-3/8 9-9/6 07 /Seat 07 - non-rotating Vee stem (on-off service) 08 - non-rotating regulating stem (tapered tip for regulating and shutoff) 87 - Vee stem with replaceable seat 88 - Regulating stem with replaceable seat ody Pattern - two-way straight 2 - two-way angle 3 - three-way, two on pressure 4 - three-way, one on pressure 5 - three-way, two-stem manifold valve XX Options or extreme temperature and other options, see Valve Options. 0 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options xtreme Temperatures Standard Parker utoclave ngineers valves with PT packing may be operated from 0 (-7.8 ) to 450 (232 ). High temperature packing is available for service from -423 (-252 ) to 200 (649 ) by adding the following suffixes to catalog order number. T - standard valve with PT glass packing to 600 (36 ). note below. Y - standard valve with graphite braided yarn packing to 800 (427 ). HT - extended stuffing box valve with graphite braided yarn packing to 200 (649 ). - standard valve with cryogenic trim material and PT packing to -00 (-73 ). LT - extended stuffing box valve with PT packing & ryogenic trim materials to -423 (-252 ). K - anti-vibration collet and gland assembly. Note: 40V and 60V valves supplied with Peak/PT lass/peek Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: R60V407) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found in the valve drawing or contact your Sales Representative for information. onsult your Parker utoclave ngineers representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 60V407 V 60V408 R 60V607 V 60V608 R 60V907 V 60V908 R 2-Way ngle 60V4072 V 60V4082 R 60V6072 V 60V6082 R 60V9072 V 60V9082 R 3-Way / 2 on Pressure 60V4073 V 60V4083 R 60V6073 V 60V6083 R 60V9073 V 60V9083 R /4 0.062 2.00.00 0.50.69.3 2.2 3.00.00 0.22 4.75 0.69 0.38.00 (6.35) (.57) (50.80) (25.40) (2.70) (42.93) (33.27) (53.85) (76.20) (25.40) (5.59) (20.65) (7.53) (9.65) (25.40) 3/8 0.062 2.00.00 0.53.69.3 2.25 3.00.00 0.22 4.87 0.69 0.38.00 (9.53) (.57) (50.80) (25.40) (3.46) (42.93) (33.27) (57.5) (76.20) (25.40) (5.59) (23.70) (7.53) (9.65) (25.40) 9/6 0.078 2.62.3 0.72.75.3 2.50 3.00.00 0.28 5.3 0.69 0.38.50 (4.29) (.98) (66.55) (33.27) (8.29) (45.45) (33.27) (63.50) (76.20) (25.40) (7.) (30.30) (7.53) (9.65) (38.0) /4 0.062 2.00.00 0.50.3 2.38 3.00.00 0.22 5.00 0.69 0.38.00 (6.35) (.57) (50.80) (25.40) (2.70) (33.27) (60.45) (76.20) (25.40) (5.59) (27.00) (7.53) (9.65) (25.40) 3/8 0.062 2.00.00 0.53.3 2.62 3.00.00 0.22 5.25 0.69 0.38.00 (9.53) (.57) (50.80) (25.40) (3.46) (33.27) (66.55) (76.20) (25.40) (5.59) (33.35) (7.53) (9.65) (25.40) 9/6 0.078 2.62.3 0.72.3 2.8 3.00.00 0.28 5.44 0.69 0.38.50 (4.29) (.98) (66.55) (33.27) (8.29) (33.27) (7.37) (76.20) (25.40) (7.) (38.8) (7.53) (9.65) (38.0) /4 0.062 2.00.00 0.50.69.3 2.38 3.00.00 0.22 4.75 0.69 0.38.00 (6.35) (.57) (50.80) (25.40) (2.70) (42.93) (33.27) (60.45) (76.20) (25.40) (5.59) (20.65) (7.53) (9.65) (25.40) 3/8 0.062 2.00.00 0.53.69.3 2.75 3.00.00 0.22 4.87 0.69 0.38.00 (9.53) (.57) (50.80) (25.40) (3.46) (42.93) (33.27) (68.86) (76.20) (25.40) (5.59) (23.70) (7.53) (9.65) (25.40) 9/6 0.078 2.62.3 0.72.75.3 3.03 3.00.00 0.28 5.3 0.69 0.38.50 (4.29) (.98) (66.55) (33.27) (8.29) (45.45) (33.27) (76.96) (76.20) (25.40) (7.) (30.30) (7.53) (9.65) (38.0) igure igure 2 igure 3 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. igure * H imension is with stem in closed position. ll dimensions for reference only and subject to change. igure 2 igure 3 or prompt service, Parker utoclave ngineers stock select products. onsult factory. 2-Way ngle 3-Way / 2 on Pressure ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 3-Way / on Pressure 60V4074 V 60V4084 R 60V6074 V 60V6084 R 60V9074 V 60V9084 R 2-Way ngle / Replaceable Seat 60V4872 V 60V4882 R 60V6872 V 60V6882 R 60V9872 V 60V9882 R 3-Way / 2- anifold 60V4075 V 60V4085 R 60V6075 V 60V6085 R 60V9075 V 60V9085 R /4 0.062 2.00.00 0.50.3 2.38 3.00.00 0.22 5.00 0.69 0.38.00 (6.35) (.57) (50.80) (25.40) (2.70) (33.27) (60.45) (76.20) (25.40) (5.59) (27.00) (7.53) (9.65) (25.40) 3/8 0.062 2.00.00 0.53.3 2.62 3.00.00 0.22 5.25 0.69 0.38.00 (9.53) (.57) (50.80) (25.40) (3.46) (33.27) (66.55) (76.20) (25.40) (5.59) (33.35) (7.53) (9.65) (25.40) 9/6 0.078 2.62.3 0.72.3 2.8 3.00.00 0.28 5.44 0.69 0.38.50 (4.29) (.98) (66.55) (33.27) (8.29) (33.27) (7.37) (76.20) (25.40) (7.) (38.8) (7.53) (9.65) (38.0) /4 0.062 2.00.00 0.50.3 2.2 2.62 3.00.00 0.22 6.28 0.69 0.38.00 (6.35) (.57) (50.80) (25.40) (2.70) (33.27) (53.85) (66.55) (76.20) (25.40) (5.59) (59.5) (7.53) (9.65) (25.40) 3/8 0.062 2.00.00 0.53.3 2.36 2.62 3.00.00 0.22 6.52 0.69 0.38.00 (9.53) (.57) (50.80) (25.40) (3.46) (33.27) (59.94) (66.55) (76.20) (25.40) (5.59) (65.60) (7.53) (9.65) (25.40) 9/6 0.078 2.62.3 0.72.3 2.68 2.62 3.00.00 0.28 6.90 0.69 0.38.50 (4.29) (.98) (66.55) (33.27) (8.29) (33.27) (68.07) (66.55) (76.20) (25.40) (7.) (75.26) (7.53) (9.65) (38.0) /4 0.062 2.00.00 0.50.72.3 3.44 3.00.00 0.22 6.07 0.69 0.38.00 (6.35) (.57) (50.80) (25.40) (2.70) (43.69) (33.27) (87.38) (76.20) (25.40) (5.59) (54.8) (7.53) (9.65) (25.40) 3/8 0.062 2.00.00 0.53.88.3 3.75 3.00.00 0.22 6.37 0.69 0.38.00 (9.53) (.57) (50.80) (25.40) (3.46) (47.75) (33.27) (95.25) (76.20) (25.40) (5.59) (6.80) (7.53) (9.65) (25.40) 9/6 0.078 2.62.3 0.72 2.06.3 4.2 3.00.00 0.28 6.37 0.69 0.38.50 (4.29) (.98) (66.55) (33.27) (8.29) (52.32) (33.27) (04.65) (76.20) (25.40) (7.) (6.80) (7.53) (9.65) (38.0) igure 4 igure 5 igure 6 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure 4 igure 5 igure 6 H N 3-Way / on Pressure 2-Way ngle / Replaceable Seat 3-Way / 2 anifold 2 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valves - 00V & 50V Series Pressures to 50,000 psi (0350 bar) Pressure Rating iameter Orifice psi (bar) Size onnection Size Rated @ Room Inches Inches (mm) v * Temperature** Series 00V /4, 5/6, 3/8 3250 0.062 (.57).09 00,000 (6895) Series 50V 5/6 3250 0.062 (.57).06 50,000 (0342) Notes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. 7 eneralized low oefficient urves (v) 6 Number of turns open 5 4 3 2 Vee 00V 50V 0 0 20 30 40 50 60 70 80 90 00 % of rated v PKIN LN POWR OT STINLSS STL HNL LUINU RONZ PKIN LN LOKIN VI OL WORK 36/5-5PH SS OY IN THR PTTRNS LOKIN VI NON-ROTTIN ST NON-ROTTIN ST NTI-XTRUSION K-UP RINS JUSTL PKIN LOW THRS JUSTL PKIN LOW THRS 5-5PH HIH STRNTH STINLSS STL 00V Series TL-TO-TL STIN To ensure proper fit use utoclave tubing Notes: Torque wrench required to operate valves. 50V Series ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact your Sales Representative. The 00V Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: 00V507 00V Valve Series 00V 50V * Note: /4" and 3/8" for 00V only. 5 iameter Size *4-/4 5-5/6 *6-3/8 07 07 - non-rotating Vee stem (on off service) 08 - non-rotating regulating stem (tapered tip for regulating shutoff ody Pattern - two-way straight 2 - two-way angle 3 - three-way, two on pressure XX Options or extreme temperature and other options, see Valve Options. Valve Options xtreme Temperatures Standard Parker utoclave ngineers valves with PT packing may be operated to 450 (232 ), and to 230 (0 ) with nylonleather packing. K - anti-vibration collet and gland assembly. or other packing options consult the factory. Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: R00V507) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found in the valve drawing or contact your Sales Representative for information. onsult your Parker utoclave ngineers representative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 00V407 00V507 V 00V607 2-Way ngle 00V4072 00V5072 V 00V6072 /4" (6.35) 5/6" (7.93) 3/8" (9.53) /4" (6.35) 5/6" (7.93) 3/8" (9.53) 0.062 3.00.50 0.52.75.44 2.25 4.00.2 0.34 5.32.2 0.50.38 (.57) (76.20) (38.0) (3.2) (44.45) (36.58) (57.5) (0.60) (28.45) (8.64) (35.3) (28.45) (2.70) (35.05) 0.062 2.25.50 0.52.44 3.00 4.00.2 0.34 6.05 0.94 0.50.38 (.57) (57.5) (38.0) (3.2) (36.58) (76.20) (0.60) (28.45) (8.64) (53.67) (23.88) (2.70) (35.05) igure igure 2 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure igure 2 H N 2-Way ngle 4 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
atalog Number iameter Orifice iameter imensions - inches (mm) lock Thick- Valve H* N ness Pattern 3-Way / 2 On Pressure 00V4073 00V5073 V 00V6073 /4" (6.35) 5/6" (7.93) 3/8" (9.53) 0.062 3.00.50 0.52.75.44 3.25 4.00.2 0.34 6.3.2 0.50.38 (.57) (76.20) (38.0) (3.2) (44.45) (36.58) (82.55) (0.60) (28.45) (8.64) (60.27) (28.45) (2.70) (35.05) igure 3 2-Way ngle/replaceable Seat 00V4872 00V5872 V 00V6872 /4" (6.35) 5/6" (7.93) 3/8" (9.53) 0.062 2.25.50 0.52.44 3.00 4.00.2 0.34 7.57 0.94 0.50.38 (.57) (57.5) (38.0) (3.2) (36.58) (76.20) (0.60) (28.45) (8.64) (92.30) (23.88) (2.70) (35.05) igure 4 2-Way ngle / Replaceable Seat 50V5072 V 5/6 0.062 3.75.88.052 2.25 2.63 4.00.650 7.2.25 = (7.93) (.57) (95.25) (47.63) (3.2) (57.5) (66.80) (0.60) (4.9) (80.85) (3.75) igure 5 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. mounting note below for 50V series. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure 3 igure 4 = igure 5 H N H 3-Way / 2 on Pressure 2-Way ngle / Replaceable Seat iameter 2-Way ngle / Replaceable Seat = (2) /4"-20 mounting holes 80 apart and () locking device screw 90 apart ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
WRNIN ILUR, IPROPR SLTION OR IPROPR US O TH PROUTS N/OR SYSTS SRI HRIN OR RLT ITS N US TH, PRSONL INJURY N PROPRTY. This document and other information from Parker Hannifin orporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin orporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are available for sale by Parker Hannifin orporation, its subsidiaries or its authorized distributors. ny sale contract entered by Parker will be governed by the provisions stated in Parker's standard terms and conditions of sale (copy available upon request). 203 Parker Hannifin orporation utoclave ngineers is a registered trademark of the Parker Hannifin orporation 02-03S January203 Instrumentation Products ivision utoclave ngineers Operation 8325 Hessinger rive rie, Pennsylvania 6509-4679 US PH: 84-860-5700 X: 84-860-58 www.autoclave.com Parker Hannifin anufacturing Ltd. Instrumentation Products ivision, urope Industrial state Whitemill Wexford, Republic of Ireland PH: 353 53 94 566 X: 353 53 94 582 aution! o not mix or interchange parts or tubing with those of other manufacturers. oing so is unsafe and will void warranty. aution! Parker utoclave ngineers Valves, ittings and Tools are not designed to work with common commercial instrument tubing and will only work with tubing built to Parker utoclave ngineers S Specifications. ailure to do so will void warranty. ISO-900 ertified