How To Order Series 79 HOW TO ORDR Sample Part Number H-66 M N Part Number Rear Panel Float Mount Plugs SOCKT CONTCTS WITH CRIMP TRMINTION connectors are equipped with rear-panel float mounting assemblies to provide additional mounting leeway in rack and panel applications. These connectors feature machined aluminum shells and wire grommets for environmental protection. Contacts are rear-release snap-in crimp type. are supplied with crimp contacts packaged separately. Size #23 signal pins accept up to #22 WG wire. Size #16 contacts accept #16-18 WG wire. Size #12 contacts accept #12-14 WG wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately. ttach optional shielding adapters (799-016) for MI protection. Shell Size - Insert rrangements Shell Finish MI Spring Option Rear Panel Float Mounted Receptacle with Socket Contacts See Table I for vailable Insert rrangements To order a connector without size #16 or #12 power pins, substitute W instead of P in the insert arrangement. xample: 36P2 is supplied with 2 power pins. 36W2 is supplied less the power pins. See Section for coaxial contacts purchased separately. M lectroless Nickel general purpose applications MT Nickel-PTF 1000 Hour Grey maximum corrosion protection and durability (non-reflective grey) ZNU Zinc-Nickel with lack Chromate tactical applications (non-reflective black) dditional shell finishes are listed on page C-9. MI Spring N No Spring MI SPRING Note: MI Spring is not compatible with chromate finishes including cadmium and zinc-nickel N No G Guide Pin S Female Guide Socket SPCIFICTIONS Current Rating #23 5 MPS, #16 13., #12 23. Dielectric Withstanding Voltage #23 500 VC RMS, #12 and #16 1800 VC RMS Insulation Resistance 5000 megohms minimum Operating Temperature -65 C. to +150 C. Shock 300 g. Vibration 37 g. MTRILS ND FINISHS Shell luminum alloy Contacts Copper alloy, 50 microinches gold plated, stainless steel hood Insulators Liquid crystal polymer (LCP) Retention Clips eryllium copper alloy Grommet Flourosilicone rubber 300 series stainless steel U.S. CG Code 06324 GLNIR, INC. 1211 IR WY GLNDL, C 91201-2497 818-247-6000 FX 818-500-9912-17 -Mail: sales@glenair.com
Series 79 How To Order Table I Contact rrangements Layout Contact Quantity #23 #16 #12-5 5-2P2 2-9 9 C-13 13 D-15 15 D-3P3 3 D-7P2 5 2-11P2 9 2-19 19-7P3 4 3 F-15P2 13 2 F-23 23 F-5P5 5 G-33 33 Face View WIR (RF. ONLY) CROSS-SCTIONL VIW OF FRONT INSULTOR RTINING CLIP RR INSULTOR GROMMT.025.183 TL 2 HRDWR OPTION MI SPRING SOCKT CONTCT LIGNMNT USHING HOUSING FLOT MOUNT SSMLY H-10P4 6 4 H-29P7 22 7 H-36P2 34 2 H-54P2 52 2 H-5P5 5 H-66 66 J-17P4 13 4 N No Mating Connector is supplied with threaded holes. Shell sizes H and L have #6-32 threads, other sizes have #4-40 threads. Thread depth is.150" (3.8). G Guide Pins Connector is supplied with stainless steel non-removable guide pins. Mates with type S guide sockets on corresponding receptacle connector. J-25P2 23 2 J-33 33 J-7P7 7 K-27P4 23 4 K-35P2 33 2 S Guide Sockets Connector is supplied with stainless steel non-removable bushings. Mates with type G guide pins on corresponding receptacle connector. K-43 43 K-9P9 9 L-6P6 6 L-78 78 M-102 102 U.S. CG Code 06324 GLNIR, INC. 1211 IR WY GLNDL, C 91201-2497 818-247-6000 FX 818-500-9912-18 -Mail: sales@glenair.com
Series 79 Shell Sizes,, C, D,, F, J and K asic C asic D SIC C SIC D.233 (5.92).150 (3.81).183 ±.003 (4.65 ±0.08) S SCTION - FOR FLOTMOUNT DTILS JCKPOST SHOWN FOR RFRNC MI SPRING LIND MT.795 (20.19).093 ±.003 (2.36 ±0.13) C asic C SIC.645.645 (16.38) (16.38).215.215 (5.46) (5.46) SHLL SIZS,, C, D,, F, G, J, K ±.040 (1.02) LLOWL MISLIGNMNT FROM CNTRLIN.218.138.040 RDIL FLOT TWN CONNCTOR ND HRDWR Connector.485 (12.32) 2-56 UNC-2 2X Shell Size SCTION - FOR SIZS,, C, D,, F, G, J & K CONNCTORS (HRDWR IS FOR #2-56 SCRW) SIZS,, C, D,, F, G, J & K DIMNSIONS asic C asic D In. mm. In. mm. In. mm. In. mm. In. mm. 1.600 40.64 1.125 28.58.565 14.35.335 8.51.760 19.30 1.700 43.18 1.275 32.38.715 18.16.485 12.32.910 21.11 C 1.900 48.26 1.425 36.20.865 21.97.635 16.13 1.060 26.92 D 2.000 50.80 1.525 38.74.965 25.51.735 18.67 1.160 29.46 2.150 54.61 1.675 42.55 1.115 28.32.885 22.48 1.310 33.27 F 2.300 58.42 1.825 46.36 1.265 32.13 1.035 26.29 1.460 37.08 J 2.650 67.31 2.175 55.25 1.615 41.02 1.390 35.31 1.810 45.97 K 3.050 77.47 2.575 65.41 2.015 51.18 1.795 45.59 2.210 56.13.093 U.S. CG Code 06324 GLNIR, INC. 1211 IR WY GLNDL, C 91201-2497 818-247-6000 FX 818-500-9912-19 -Mail: sales@glenair.com
Series 79 Shell Size G 2.250 (57.15) 2.250 (57.15) 1.775 (45.08) asic 1.215 (30.86) asic 1.010 (25.65) 1.775 (45.08) SIC 1.215 (30.86) SIC 1.010 (25.65).320 (8.13) Max.150 (3.81).183 ±.003 (4.65 ±0.08) S SCTION - FOR FLOTMOUNT DTILS JCKPOST SHOWN FOR RFRNC MI Spring SPRING.218.138.040 RDIL FLOT TWN CONNCTOR ND HRDWR Connector.093±.003 (2.36±0.13).093 ±.003 (2.36 ±0.13) 1.410 (35.81) 1.410 (35.81) 1.215 (30.86) asic 1.215 (30.86 SIC.215 (5.46).215 (5.46).093 SCTION - FOR SIZS,, C, D,, F, G, J & K CONNCTORS (HRDWR IS FOR #2-56 SCRW).570.570 (14.48) (14.48) 2-56 2-56 UNC-2 2X U.S. CG Code 06324 GLNIR, INC. 1211 IR WY GLNDL, C 91201-2497 818-247-6000 FX 818-500-9912-20 -Mail: sales@glenair.com
Series 79 Shell Sizes H and L F F G G SIC asic H SIC H asic J J.349 (8.86) Max.150 (3.81).183 ±.003.183±.003 (4.65 (4.65±0.08) S SCTION - FOR FLOTMOUNT DTILS JCKPOST Jackpost ShownSHOWN FOR For Reference RFRNC MI Spring SPRING.093.093±.003 ±.003 (2.36 (2.36±0.13) ± 0.13) K K H SIC H asic.265 (6.73).250.170.040 RDIL FLOT TWN ND HRDWR CONNCTOR HRDWR.120 SCTION Section - - For Size "H & L" Connector FOR SIZS ( H Is & for L #4-40 CONNCTORS Screw) (HRDWR IS FOR #4-40 SCRW).600.600 (15.24) (15.24) LIND MT 4-40 UNC-2 X (.150) (1.50) Min MIN Deep. DP 790-050P SIZS H & L DIMNSIONS Shell F G asic H asic J K Size In. mm. In. mm. In. mm. In. mm. In. mm. H 2.780 70.61 2.415 61.34 1.800 45.72 1.385 35.18 2.045 51.94 L 3.016 76.61 2.651 67.34 2.036 51.71 1.623 41.22 2.281 57.94 SHLL SIZS H, L ±.040 (1.02) LLOWL MISLIGNMNT FROM CNTRLIN U.S. CG Code 06324 GLNIR, INC. 1211 IR WY GLNDL, C 91201-2497 818-247-6000 FX 818-500-9912-21 -Mail: sales@glenair.com
Series 79 Shell Size M 3.330 (84.58) 2.910 (73.91) asic 2.200 (55.88) asic 1.675 (42.65).150 (3.81).660 (16.76) Max.407 (10.34).183±.003 (4.65±0.08) See Section - for Floatmount Details Jackpost Shown For Reference.093±.003 (2.36±0.13) 2.485 (63.12) 2.200 (55.88) asic LIND MT.270.170 4-40 UNC-2 X (.150) Min Deep. 2 Places.050 Radial Float etween Connector and Connector SHLL SIZ M ±.050 (1.27) LLOWL MISLIGNMNT FROM CNTRLIN.120 Section - For Size "M" Connector ( Is For #4-40 Screw) U.S. CG Code 06324 GLNIR, INC. 1211 IR WY GLNDL, C 91201-2497 818-247-6000 FX 818-500-9912-22 -Mail: sales@glenair.com