Install and Forget
The new range of Rezi-Kon cast resin joints from Thomas & Betts provide a convenient and reliable solution for splicing and branching low voltage cables, in applications like street and leisure lighting, airfield lighting, utility / home connections. The Rezi-Kon cable joints are made of a Polycarbonate shell filled with a Polyurethane resin, which provides a watertight connection that can be immediately operational. They are available in two styles, for a complete range of cable sizes from 1.5 to 400 mm 2 : - straight: for splicing or repairing existing cables - branch: for tapping a new cable on an existing line Suitable for voltages up to 3.6 kv Easy to use on the field: no heat source or power required Quick and easy to install, immediately operational Can be buried Watertight: protection against water ingress from the cable and from the shell Excellent electrical properties HD623 compliant Halogen free. RoHS compliant Exclusive shell design, with a unique clip system for easy assembly and watertight closing Transparent shell, for a better inspection before and during the casting High grade Polycarbonate: UV-resistant, impact resistant, flame retardant 2-component Polyurethane resin Reduced exothermic properties (generates little heat during the reaction of polymerisation), therefore suitable for all kinds of cables (power, phone, control) Duo-bag packaging: pre-filled bag for correct mix ratio and safe mixing (no contact with the components) Range of exclusive insulated connectors
Transparent shell, for a better inspection of the inside before and during the casting High quality Polycarbonate (PC), halogen free, impact and chemical resistant Adjustable ends, for better suiting the cable diameter Exclusive shell design, with unique clip system for easy assembly and watertight closing Exclusive insulated connectors, specially designed for the Rezi-Kon cast resin joints Easy to connect, shell design allows for cross core jointing in every size Ready-to-mix: no need to open the bag, just remove the separation for a safe mixing without contact with the components Transparent bag, for a better inspection of the mixing process 3 years shelf life 2-component Polyurethane resin in pre-filled duo-bag, always the correct mix ratio and the exact volume for the joint size Low exothermic properties, for use with all kinds of cables (power, phone, control)
A range of high performance cast resin joints, for a quick and reliable installation on the field with a watertight protection. Recommended for the connection of low voltage cables (up to 3.6 kv), from 1.5 to 400 mm 2. Available in 2 styles: straight (for splicing) and branch (for tapping) Watertight protection, both longitudinal (from inside the cable) and transversal (from the shell) For permanent installation Easy to install, allows easy cable crossing Each kit is supplied in a box containing: - 1 Polycarbonate shell (upper and lower halves) - the 2-component Polyurethane resin, in pre-filled duo-bag containing the correct volume to suit the size of cable joint - a pair of gloves, a reel of tape, a strip of sand paper, an instruction sheet Straight Joints PRODUCT REF. CABLE Ø RANGE CONDUCTOR SECTION [mm] [mm 2 ] 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 CRJ-S4 6-21 CRJ-S10 8-30 CRJ-S16 10-33 CRJ-S25 17-38 CRJ-S50 20-40 CRJ-S120 30-50 CRJ-S240 50-75 CRJ-S400 55-115 Branch Joints PRODUCT REF. CRJ-SB4 CRJ-SB10 CRJ-SB25 CRJ-SB50 CRJ-SB120 CRJ-SB240 CRJ-SB400 CONDUCTOR SECTION [mm 2 ] 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 Tables are valid for non-armoured cables with four conductors
Separate Resin Bags The resin bags can also be ordered separately as spare. The convenient pre-filled duo-bag guarantees a correct mix ratio and a safe mixing, by preventing the installer from having possible contact with the components. 2-component Polyurethane in ready-to-mix duo-bag packaging Low exothermic properties, can be used with all kind of cables (power, phone, control) For permanent application Excellent electrical and mechanical properties: good elasticity and adhesion to all kinds of cables Specific colour after mixing: beige 3 years shelf life (outer protective envelope in aluminium) Compliant to the HD623 European Harmonised Directives. Halogen free. RoHS compliant. Separate Resin Bags PRODUCT REF. VOLUME WEIGHT QUANTITY [litre] [g] [pieces] CRJ-PU-0075 0.075 107 1 CRJ-PU-0175 0.175 250 1 CRJ-PU-0300 0.300 429 1 CRJ-PU-0550 0.550 787 1 CRJ-PU-1000 1 1287 1 CRJ-PU-2000 2 2860 1 CRJ-PU-3000 3 4290 1 Insulated connectors Exclusive connectors, specially designed for the straight Rezi-Kon joints Safe and easy connection: the 4 conductors always remain separated from each other Insulation in Polypropylene, contacts in brass 4 screws per contact Suitable for voltages up to 1 kv Insulated Connectors PRODUCT REF. CABLE RANGE QUANTITY [mm 2 ] [pieces] CRJ-IC-010 0.75-10 1 CRJ-IC-025 4-25 1 CRJ-IC-050 16-50 1 CRJ-IC-120 35-120 1
THOMAS & BETTS European Headquarters Chaussée de Waterloo 200 B-1640 Rhode-St-Genèse BELGIUM Tel: +32 (0)2 359 82 00 Fax: +32 (0)2 359 82 01 EUROPEAN CUSTOMER SERVICE Tel: +32 (0)64 88 63 88 Fax: +32 (0)64 88 65 50 UNITED KINGDOM IRELAND MIDDLE EAST Wilford Road NG2 1EB Nottingham UNITED KINGDOM Tel: +44 (0) 115 964 3820 Fax: +44 (0) 115 986 0538 www.tnb.com Authorised Distributor Ref: ELP-FL-REZ-6UK