2FV2V Series Variable riority Flow Dividers Milwaukee, WI 53235, USA Tel: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK Tel: +44 (0) 1480 397 400 sales-uk@webtec.com www.webtec.com riority Type Flow Dividers split a single input () flow into a riority (regulated) flow and a By-ass (excess) flow which can be returned directly to the oil reservoir or used to power a second system. In many instances this dispenses with the need for another pump to operate a second system. Specifications Maximum (working) ressure: 250 bar (00 psi) Total flow capacity: 114 lpm (30 US gpm) Regulated flow capacity: See Table 2, ordering codes orting: See Table 3, ordering codes Material: Steel components in cast iron body painted black; aluminium knob (steel knob optional) Weight: 2.10 to 3.50 Kg (4.6 to 7.7 lbs) Mounting: Two bolt - M8 or 5/16 (Except manifold version which uses 4 bolts) Relief valve (optional): Adjustable between 35-207 bar (508-3000 psi) Factory set to 138 bar (2000 psi) Max. riority flow - 50 lpm (13.2 US gpm) Check valve (optional): 250 bar (00 psi) working pressure (Anti-cavitation check valve available) Features l Clearly marked singleturn hand dial permits fast visual adjustments to predetermined riority flow and fast easy adjustments of riority circuit to meet varying requirements. l ressure compensated permitting both riority and By-ass to be used simultaneously at varying pressures without affecting the riority flow rate. l All models (except manifold mount) can be supplied with an adjustable pressure relief valve or check valve on riority flow. Anticavitation check valve can be routed between the By-ass and riority flows. l Anti-tamper locknut option available for all models, Contact Sales Office for more information. l For intermittent reverse flow, needle valve pull back version available l Remote control versions available see Hydraulics Catalogue. B Certificate No.8242 Hydraulic measurement and control 2FV2V-BU-ENG-2377.pdf 11/13 (Issue 6)
Ordering Codes Typical Code M 2FV2V 125 K ( ) LN Manifold mounting (available on 2FV2V model only) Valve Type (Table 1) Regulated Flow Capacity (Table 2) orting (Table 3) ressure Setting (if other than Factory Set Relief required) Anti-Tamper Option (Regulated Flow Setting) Table 1: Valve Type Code Description 2FV2V RV2FV2V CK2FV2V AC2FV2V M2FV2V B2FV2V BRV2FV2V No Relief Valve Relief Valve between riority and By ass Flow ort Check Valve between riority and Inlet Flow ort Anti-cavitation Check Valve between By-ass and riority Flow ort Manifold Mounted ull Back version ull Back version, Relief Valve between riority and By ass Flow ort Table 2: Regulated Flow Code Regulated Flow 030 0-11 lpm (3.0 US gpm) 050 0-19 lpm (5.0 US gpm) 080 0-30 lpm (8.0 US gpm) 125 0-47 lpm (12.5 US gpm) 200 0-76 lpm (20.0 US gpm) 250 0-95 lpm (25.0 US gpm) 300 0-114 lpm (30.0 US gpm) Table 3: orting* Code ort Threads Inlet Regulated Flow and Excess Flow Relief Valve External Drain where fitted J 3/4 BS 1/4 BS A 3/4 NTF 1/4 NTF M M22 x 1.5, M27 x 2 M14 x 1.5 G 1-1/16-12UN #12 SAE ORB 9/16-18UN #6 SAE ORB H 1/2 BS 1/4 BS K Manifold mounted (custom hole pattern) N/A * Other threads available to special order. Note: M22 only available in flow code 030 to 125 M27 only available in flow code 200 to 300 1/2 BS only available in flow code 030 to 125 Manifold mounted only available in flow code 030 to 125.
12 Typical ressure Drop 2FV2V Series (in forward direction) ressure Drop (bar) 10 8 6 4 2 0 20 40 60 80 100 120 Input Flow (lpm) 50 Typical ressure Drop CK2FV2V Series (in reverse direction) ressure Drop (bar) 40 30 20 10 Needle valve closed Needle valve open 0 0 20 40 60 80 100 Reverse Flow (lpm) Curve established using hydraulic mineral oil ISO 32 with viscosity of 21 centistokes at 50 C Flow (lpm) Typical flow control performance - varying input conditions 90 1800 80 1600 70 1400 60 1200 50 1000 40 800 30 600 20 400 10 200 0 0 1 2 3 4 5 6 7 8 0 9 ressure (psi) Time (seconds) riority flow Input flow riority pressure
Installation Details Dimensions in millimetres (B) 2FV2V (No Relief Valve) Inlet () By-ass (B) 97 (3.82 ) 46 riority () Ø8.5 (0.33 ) Thru (B) RV2FV2V (Internal Relief Valve between riority and By-ass Flow orts) 46 B Inlet () riority () 120 (4.72 ) Ø8.5 (0.33 ) Thru By-ass (B) B RV2FV2V with RELIEF to B CK2FV2V (Internal Check Valve between the riority and Inlet Flow orts) Inlet () 46 T B riority () 120 (4.72 ) Ø8.5 (0.33 ) Thru By-ass (B)
AC2FV2V (Internal Anti-cavitation Check Valve between the By-ass and riority Flow orts) Inlet () 46 B T riority () 120 (4.72 ) Ø8.5 (0.33 ) Thru By-ass (B) M2FV2V (Manifold Mount) 103 (4.06 ) 81 (3.19 ) Inlet (): Ø9.53 (3/8 ) Ø8.5 (0.33 ) Thru 3.6 (0.14 ) 38.9 (1.53 ) 46.0 35.3 (1.39 ) 64 (2.52 ) 22.4 (0.88 ) 3.6 (0.14 ) 27.4 (1.08 ) By-ass (B): Ø12.7 (1/2 ) C L riority (): Ø9.53 (3/8 ) 25.9 (1.02 ) C L 3 extra Mtg Holes Ø6.35 (0.25 ) Thru B LN (Anti-Tamper Locknut Option) Anti-tamper locknut option (available for all models) Height reduced by 7mm when using locknut option Add - LN at the end of the ordering code State flow setting required
Sectioned View Circuit 1 Circuit 2 Circuit Suggestions 1 Variable Speed of Hydraulic Motor Drive on Agricultural Tractor This circuit gives the capability to vary the speed of a hydraulic motor as required. Also, for a given control knob setting, the hydraulic motor speed stays constant regardless of the tractor speed. 2 Two Circuits From a Single ump Using only one pump, this circuit gives speed control of the hydraulic motor and powers a hydraulic cylinder. Each function can be used either simultaneously or independently because pressure variations between regulated and By-ass flows do not effect the flow on the regulated circuit. Circuit 3 3 Multiple Circuits From a Single ump Using one pump, this circuit gives independently variable speed drive from three hydraulic motors. Motors can be used simultaneously or independently. Webtec reserve the right to make improvements and changes to the specification without notice