LISTA_Workstations
OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material 2 www.lista.com 01/2007; LISTA 2007
Table of content Lista table system Introduction 4 Table subelements basic units 7 Add-on table subelements 9 Table subelements, component parts 10 Table tops 12 Drawer cabinets 18x27E 13 Superstructure Space Introduction 16 Superstructure / division system 19 Organisational elements 21 Lighting 25 Energy supply 26 Assembly trolleys 29 Superstructure Uno Introduction 32 Table structure 34 Organisational elements 35 Lighting 39 Power conduits 41 Workstation accessories Workstation superstructures 42 Storage containers 46 01/2007; LISTA 2007 www.lista.com 3
LISTA TABLE SYSTEM THE FUTURE SYSTEM WITH THE RATIONAL CONCEPT New forms of organization and changed production processes and technologies call for new workplace concepts. Flexibility is the universal requirement. Existing concepts may be adequate for partial solutions. With its new approach, however, Lista offers an all-embracing solution, comprising the table system, the superstructure system, the addon system and the space dividing system, which tables can also be connected to. Whether asingle table, several workplaces, or a team cell is involved, the interlinking of electrics, electronics, compressedair supply and data make the Lista Space workplace system a concept with a guaranteed future. Lista,makingworkspace work. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N 4 www.lista.com 01/2007; LISTA 2007
OVERVIEW A workplace system that combines four systems: Table system Theworkplace system centresround thetable system, distinguishedby itssimplicity and elegance. The tables are adjustable in height. Beside or below them, the drawer cabinets accoodate small parts. Superstructure Uno Thesuperstructuresystem supports theshelves, rear panels,adapters formonitors and other brackets, container strips, supporting arms, light fittings and supply conduits. Superstructure Space Thespace division system organises individual workplaces into ateam space.wall element screens can be of different materials and fitted with cabinets,shelves and other aids to organisation. Add-on system Future workplace requirements will involvegreatermobility.quality controlwillbe decentralised to thepoints of production. Increased processorientation will require new forms of organisation. Hard laminated top High-density chipboard core, finished in 0.8 thick laminate, highly resistant to abrasion andimpacts. Surface and edges lightgrey NCS S1500-N. Multiplex top Steam-treated beech veneer, waterproof glued multi-layer (DIN 68 705), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oiland grease. adjustment with catch Simple height adjustment without tools, using acatch assembly (700, 750, 800, 850, 900, 960, 1020, excluding table top). adjustment with hand crank Convenient, continuous height adjustment using aremovable hand crank (700 1020,excluding table top). 01/2007; LISTA 2007 www.lista.com 5
LISTA TABLE SYSTEM DIMENSIONS Table system dimensions Top width Clear width A B 1200 1100 1600 1500 2000 1900 Top Useful Front top Foot from Foot depth depth projection behind width C D E F G 700 675 75.5 322.5 690 800 775 175.5 322.5 690 900 799 199 399 850 Top Useful Front top Foot from Foot depth depth projection behind width C D E F G 700 620 75.5 322.5 690 800 720 175.5 322.5 690 Planning information 1. New design GE = Table support frame basic unit AE = Table support frame extension basic unit 2. Splitting an existing installation 3. Extending an existing installation GE = Table support frame basic unit AE = Table support frame extension basic unit 6 www.lista.com 01/2007; LISTA 2007
lista Table system Table subelements basic units Fixed height Table feet with fixed height. The feet are fitted with levelling screws. A steel frame joins the feet and carries the table top (suitable for table top depths 700-900). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top 63.000 1200 700 600 63.001 1600 700 600 63.002 2000 700 600 Load capacity: max. 200kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. Other heights on request. adjustable with catch Table height adjustable in height with catch, no tools required. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700-900). adjustments (without top): 700, 750, 800, 850, 900, 960, 1020. Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL 7035. Triangular support grey metallic NCS S 6502-B. without top 63.003 1200 700-1020 600 63.004 1600 700-1020 600 63.005 2000 700-1020 600 Load capacity: max. 200kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. adjustable with hand crank Variable adjustment of table subelement with hand crank. The feet are furnished with levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700-900). The hand crank may be fitted left and right and is removable. Specification: steel construction with cast aluminium triangular supports, painted. Incl. crank gear, without hand crank. Colour: table subelements light grey RAL 7035. Triangular support grey metallic NCS S 6502-B. without top 63.006 1200 700-1020 600 63.007 1600 700-1020 600 63.008 2000 700-1020 600 Load capacity: max. 200kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. The hand crank must be ordered separately. 01/2007; LISTA 2007 www.lista.com 7
adjustable with electric motor Table subelement with motor-driven gradual mechanical height adjustment. The feet are furnished with levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700-900). Three user-defined height settings may be directly selected using the memory function. Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top 63.318 1200 700-1020 600 63.319 1600 700-1020 600 63.320 2000 700-1020 600 Load capacity: max. 150kg with evenly distributed load. Important: For free-standing placement, the crossbeam for free-standing table subelements is required. Corner unit fixed height Fixed height table legs and height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). Specification: steel construction with cast aluminium triangular supports, painted. Colour: tablesubelementslightgreyral7035. Triangular support grey metallic NCS S 6502-B. without top Top depth 63.621 1150 700 1150 700 / 800 Load capacity: max. 200kg with evenly distributed load. Other heights on request. Not in connection with Lista Uno. Corner unit height adjustable with catch Table legs height adjustable without the use of tools, height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). adjustments (without top): 700, 750, 800, 850, 900, 960, 1020. Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Top depth 63.622 1150 700-1020 1150 700 / 800 Load capacity: max. 200kg with evenly distributed load. Not in connection with Lista Uno. 8 www.lista.com 01/2007; LISTA 2007
add-on Table subelements Add-on elements are used to configure table systems (linking). Add-on elements attach to a basic element or another add-on element. They consist of a steel frame and object foot that links the two steel frames together. Not in connection with Lista Uno. Fixed height Object foot with fixed height. The foot has levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700-900). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top 63.625 1200 700 600 63.626 1600 700 600 63.627 2000 700 600 Load capacity: max. 200kg with evenly distributed load. Other heights on request. adjustable with catch Object foot with catch, height adjustable without the use of tools. The foot has levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700-900). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top 63.628 1200 700-1020 600 63.629 1600 700-1020 600 63.630 2000 700-1020 600 Load capacity: max. 200kg with evenly distributed load. Corner unit fixed height Object foot with fixed height and height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Top depth 63.623 1150 700 1150 700 / 800 Load capacity: max. 200kg with evenly distributed load. Other heights on request. Corner unit height adjustable with catch Object foot height adjustable without the use of tools, height-adjustable support foot. The feet have levelling screws. A steel frame joins the feet and carries the top (suitable for table top depths 700 and 800). adjustments (without top): 700, 750, 800, 850, 900, 960, 1020. Specification: steel construction with cast aluminium triangular supports, painted. Colour: table subelements light grey RAL7035. Triangular support grey metallic NCS S 6502-B. without top Top depth 63.624 1150 700-1020 1150 700 / 800 Load capacity: max. 200kg with evenly distributed load. 01/2007; LISTA 2007 www.lista.com 9
Table subelements component parts Crossbeam for free-standing table subelements Screwed to the feet, stabilises free-standing table subelements. Also accoodates the wall cable conduit horizontally, and the power conduit. A pair of spacers must be ordered if used with an underneath or suspended cabinet. No crossbeam is necessary when tables are joined to wall elements. Specification: steel sheet including adaption material. Colour: light grey RAL 7035. Table sub-element width 63.182 1200 175 63.183 1600 175 63.184 2000 175 Important: When fitting a horizontal wall cable conduit or energy conduit inside a crossbeam, choose a conduit one size smaller than the crossbeam. Pair of spacers 63.376 Pair of spacers 175 230 Crossbeam Screwed to the feet, stabilises free-standing table subelements. Colour: light grey RAL 7035. Table sub-element width 63.561 1200 175 63.562 1600 175 63.563 2000 175 Not in connection with Lista Uno. Important: When fitting a horizontal wall cable conduit or energy conduit inside a crossbeam, choose a conduit one size smaller than the crossbeam. Feet Pair of table feet (left and right side) for completing reconfigured table systems. Table feet either fixed height, or height adjustable with catch. Feet are fitted with levelling screws. Specification: steel construction with cast aluminium triangular supports, painted. Colour: light grey RAL 7035. Triangular support grey metallic NCS S 6502-B. For table height without top 63.615 Pair of feet, fixed height 700 63.616 Pair of feet, height adjustable with catch 700-1020 Object feet Object feet (single foot) for completing reconfigured table systems. Object feet either fixed height, or height adjustable with catch. Feet are fitted with levelling screws. Specification: steel construction with cast aluminium triangular supports, painted. Colour: light grey RAL 7035. Triangular support grey metallic NCS S 6502-B. For table height without top 63.613 Object feet, fixed height 700 63.614 Object feet, height adjustable with catch 700-1020 10 www.lista.com 01/2007; LISTA 2007
Suspended foot support Foot support suspended from table subelement (as DIN 33 406) with non-slip foot rest adjustable for height and angle. adjustment in 15 steps. Specification: steel, painted. Colour: light grey RAL7035. adjustment 63.075 450 350 580 0-300 Foot rest Covered with ribbed PVC mat. Can be used under all workstations. Specification: sheet steel. Colour: light grey RAL7035. Ribbed mat, black. 39.240 500 250 140 Removable hand crank For table top depth 63.186 700 63.187 800 63.188 900 01/2007; LISTA 2007 www.lista.com 11
Table Tops Hard laminate top Middle layer of compacted chipboard grade E1 (DIN 68 761), sandwiched both sides with hard laminate and overlay (DIN 68 765 / DIN 53 799). Laminate covering, 0.8 thick, highly impact- and abrasion-resistant. All edges with plastic 2 thick. Colour: surface and edges light grey NCS S 1500-N. Top length Top thickness Top depth 63.377 1200 23 700 63.378 1200 23 800 63.379 1200 23 900 63.381 1600 23 700 63.382 1600 23 800 63.383 1600 23 900 63.385 2000 23 700 63.386 2000 23 800 63.387 2000 23 900 Hard laminate top for corner unit Top length Top thickness Top depth 63.631 1200 23 700 63.632 1200 23 800 Table tops with a depth of 900 are not in connection with Lista Uno. Multiplex tops Steam-treated beech veneer, waterproof glued multilayer (DIN 68 705), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. Top length Top thickness Top depth 63.148 1200 20 700 63.045 1200 20 800 63.046 1200 20 900 63.149 1600 20 700 63.048 1600 20 800 63.049 1600 20 900 63.150 2000 20 700 63.051 2000 20 800 63.052 2000 20 900 Multiplex tops for corner unit Top length Top thickness Top depth 63.635 1200 20 700 63.636 1200 20 800 Table tops with a depth of 900 are not in connection with Lista Uno. 12 www.lista.com 01/2007; LISTA 2007
drawer cabinets 18x27e Suspended drawer cabinet Welded construction with central lock with cylinder, plus individual safety, incl. 2 keys. Specification: sheet steel, painted. Colour: according colour table. Clear height Type 18.120 B400 411 572 283 200 Suspension adapter Type For table depth Carrying capacity kg 63.342 HA 700 25 411 700 100 63.343 HA 800 25 411 800 100 Drawer cabinets free-standing and mobile Welded construction. Vertical supports are slotted at 25 increments to enable drawers of various front heights to be installed. Sheet steel top. Central locking system, drawer safety catch, with cylinder lock incl. 2 keys. Mobile drawer cabinet with two rubber braking and swivel castors 75 dia. and ergonomic handle. Specification: sheet steel, painted. Colour: grey metallic NCS S 6502-B. Type Clear height Picture 63.334 S 402 411 572 559 450 1 63.335 S 403 411 572 726 600 1 63.337 S 409 411 572 1026 900 1 63.338 S 402 F 411 572 691 450 2 (without castor supports) 63.339 S 403 F 411 572 858 600 2 (without castor supports) 63.341 S 409 F 411 572 1158 900 2(without castor supports) 1 Pair of castor supports 63.292 Pair of castor supports with rubber castors Drawers Standard model Front height Useful height Side / back height Carrying capacity kg 18.004 50 EA 36 33 50 18.005 75 EA 61 52 50 18.006 100 EA 86 77 50 18.007 150 EA 136 127 70 18.008 200 EA 186 177 70 18.009 300 EA 286 277 70 01/2007; LISTA 2007 www.lista.com 13
With safety catch on right Front height Useful height Side / back height Carrying capacity kg 18.010 50 EA 36 33 50 18.011 75 EA 61 52 50 18.012 100 EA 86 77 50 18.013 150 EA 136 127 70 18.014 200 EA 186 177 70 18.015 300 EA 286 277 70 Useful width of drawers 306 = 18 units of 17 Useful depth of drawers 459 = 27 units of 17 Carrying capacity with evenly distributed load EA = Normal extension: 85-90% extension possible The front heights of all the drawers together should not exceed usable cabinet height. 14 www.lista.com 01/2007; LISTA 2007
01/2007; LISTA 2007 www.lista.com 15
SUPERSTRUCTURE SPACE THE FUTURE SYSTEM WITH THE RATIONAL CONCEPT New forms of organization and changed production processes and technologies call for new workplace concepts. Flexibility is the universal requirement. Existing concepts may be adequate for partial solutions. With its new approach, however, Lista offers an all-embracing solution, comprising the table system, the superstructure system, the addon system and the space dividing system, which tables can also beconnected to. Whether asingle table, several workplaces, or a team cell is involved, the interlinking of electrics, electronics, compressedair supply and data make the Lista Space workplace system a concept with a guaranteed future. Lista,makingworkspace work. Superstructure system The superstructure system supports the shelves, rear panels, adapters for monitors and other brackets, container strips, supporting arms, light fittings and all supplyconduits forelectricity, compressedair, data, etc. Space division system The space division system organises individual workplaces into ateam space.wallelement screens canbe of differentmaterials andfitted with cabinets,shelves and other aids to organisation. Add-on system Future workplace requirements will involve greater mobility. Quality control will be decentralised to the points of production. Increased process orientation will require new forms of organisation. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N 16 www.lista.com 01/2007; LISTA 2007
OVERVIEW Triangular support The heart of the Lista Space system. Provides a rigid link betweenthe table andwallelements. Flexibility The scalene triangle supports are fitted according to the table depth. This ensures optimal workstation stability underall circumstances. Power conduits Power conduits are available for individual requirements. Perforated rear panel Awide range of rear panels: plain, round or square holes for customised workstations. Various types of keyhole hook sets are also available. Lighting Flicker-free lighting boosts productivity, quality, and general physical well-being. The results are less fatigue and lower reject rates. Electrification system Acompletesystemofcable conduitsdeliverselectricity to everyworkstation. Slottedshelves With raised long edge, attaches to shelf front or rear as preferred. Slot spacing 15 for subdivision using plain partitions. Load capacity up to 30kg. The shelves are fixed to thewallelement withoutscrews, usinga pair of brackets, horizontally or at an angle of 30. Small parts always to hand Equipment box for standard containers ensure optimal working conditions. 01/2007; LISTA 2007 www.lista.com 17
LISTA TABLE SYSTEM DIMENSIONS AND LOAD CAPACITIES Dimensions and load capacities for superstructure system Dimensions for space division 18 www.lista.com 01/2007; LISTA 2007
superstructure space superstructure / division system Wall elements Wall elements for superstructure and space division system, consisting of frame sections with corner joint, levelling feet and adaption material. The wall element may be placed vertically or horizontally. 50 spacing and a standard T-slot for M8 profile nuts and screws are available for attaching adaptations. Specification: aluminium section, painted. Colour: light grey RAL 7035. 63.012 800 80 1200 63.013 800 80 1600 63.014 800 80 2000 63.015 1200 80 1200 63.016 1200 80 1600 63.017 1200 80 2000 Wall elements can be used only in conjunction with cabinets, tables or other wall elements. Profile nut Number 63.299 Profile nut M8 20 Wall filler glass Wall filler for insertion in wall element for partitioning or screening. Specification: 5 safety glass, including rubber sealing. Colour: glass patterned. Nominal width Nominal depth 63.200 800 1200 Patterned glass 63.201 800 1600 Patterned glass 63.202 800 2000 Patterned glass 63.203 1200 1200 Patterned glass 63.204 1200 1600 Patterned glass 63.205 1200 2000 Patterned glass Other surfaces and fillers on request. Wall filler hard laminated Wall filler for insertion in wall element for partitioning or screening. Specification: 6.4 coated hard laminate panels, including rubber sealing. Colour: Hard laminate board light grey NCS S 1500-N. Nominal width Nominal depth 63.069 800 1200 Hard laminate panel 63.070 800 1600 Hard laminate panel 63.071 800 2000 Hard laminate panel 63.072 1200 1200 Hard laminate panel 63.073 1200 1600 Hard laminate panel 63.074 1200 2000 Hard laminate panel Other surfaces and fillers on request. 01/2007; LISTA 2007 www.lista.com 19
Triangular support The triangular supports (355 x 50 x 275) and their fixing material serve to join the table subelements with the superstructure system and to support the wall element. Specification: cast aluminium, painted. Colour: grey metallic NCS S 6502-B. Picture 63.018 Add-on set: table sub-element to 1 wall element 1 63.019 Add-on set: table sub-element to 2 wall elements 2 63.022 Add-on set: one-sided to wall element 3 63.234 Triangular support, single (all fastenings) 4 63.619 Add-on kit for object foot 6 63.620 Add-on kit for foot 5 The add-on set in figure 2 also includes the necessary 180 wall element connector. Add-on kits (figures 5 and 6) do not include wall element connectors, which must be ordered separately. Wall element connector 1 2 These serve to join the wall elements and are always screwed to the wall element joiners at top and bottom. Specification: steel, painted. Colour: light grey RAL7035. 3 4 Kit Picture Number 63.023 180 1 4 63.024 90 2 2 63.025 2x 90 3 4 63.026 4x 90 4 8 20 www.lista.com 01/2007; LISTA 2007
organisational elements Rear panels plain The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width 63.089 800 350 20 63.090 1200 350 20 Rear panels slotted The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. With 3.6 dia. circular perforation (for M4 x 10 Tapetite self-cutting screws), partitioning 19, and 10 x 10 square perforation, partitioning 38. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width 63.223 800 350 20 63.224 1200 350 20 Keyhole hooks see chapter component parts. Adjustable shelves, slotted Shelves are fitted with one longitudinal raised edge which can be mounted either to front or rear. Slit spacing 15 for sub division with partition walls. The shelves are fixed to the wall element without screws, using a pair of brackets, horizontally or at an angle of 30. Specification: sheet steel, painted. Colour: light grey RAL7035. Brackets: sheet steel, painted. Colour: light grey RAL7035. Nominal width Nominal depth 63.390 800 300 63.391 800 350 63.392 1200 300 63.393 1200 350 Thickness : 25 + 17 taised edge Load capacity: 30kg with evenly distributed load. Incl. pair of brackets. Dividers For partitioning of the slotted shelves. Specification: sheet steel. Colour: light grey RAL7035. Dividers For shelf depths 100.447 300 95 100.448 300 145 100.449 300 195 100.452 350 95 100.453 350 145 100.454 350 195 The spacing between the shelves is at least 25 more than the height of the separators. 01/2007; LISTA 2007 www.lista.com 21
Container strips To take storage containers sizes 2, 3 and 4. They are attached to the wall element without screws, horizontally or at an angle of 15. Specification: sheet steel, painted. Colour: light grey RAL7035. For container size Quantity of containers 63.235 800 85 2 7-14 63.235 800 85 3 7 63.235 800 85 4 5 63.235 800 85 BG 1 8 63.235 800 85 BG 2 4 63.236 1200 85 2 11-12 63.236 1200 85 3 11 63.236 1200 85 4 7 63.236 1200 85 BG 1 12 63.236 1200 85 BG 2 6 Load capacity: 25kg Storage containers see chapter component parts. Double-jointed swivel arm The double-jointed swivel arm is attached to the wall element without screws. Fitting options: Monitor shelf and equipment box with container strips. Specification: square-section steel tube, painted. Colour: light grey RAL 7035. Carrying capacity kg 63.091 450 25 The swivel arm is not finished with conductive paint. The equipment box is earthed to the workbench using the earthing cable supplied. Monitor shelf for swivel arm The monitor shelf may be used together with the swing arm for holding CRT screens (17 inches). The entire system is fitted with rotating bearings, with a pull-out keyboard holder and tilt compensation. Specification: sheet steel, painted. Colour: light grey RAL7035. Carrying capacity kg 63.398 385 340 20 Auxiliary container rack carrying frame The carrying frame may be used in combination with the double-jointed swivel arm. With the straight or tilted container strip, containers of sizes 2, 3 and 4 may be mounted. It can also be installed directly on the table without the swivel arm. Specification: sheet steel, painted. Colour: light grey RAL7035. Carrying capacity kg 63.093 575 205 425 25 22 www.lista.com 01/2007; LISTA 2007
CPU cradle Suspended CPU cradle; attaches to the table frame. Side grip adjustable for equipment approx. 100-220 wide. Specification: sheet steel, painted. Colour: light grey RAL7035. 63.399 130-250 460 490 Container strips for auxiliary container rack carrying frame The container strip will take storage containers of sizes 2, 3 and 4. It can be attached to the equipment box carrying frame without screws, either horizontally or at an angle of 15. Specification: sheet steel, painted. Colour: light grey RAL7035. For container size Quantity of containers Quantity of container strip 63.166 550 60 2 5 1 63.166 550 60 3 5 1 63.166 550 60 4 3 1 63.166 550 60 2 10 2 63.166 550 60 3 10 2 63.166 550 60 4 6 2 63.166 550 60 2 15 3 63.166 550 60 3 15 3 63.166 550 60 2 20 4 Tool rail complete Tool rail with slide rail including ball-bearing runner and two supporting arms attached to the wall element without screws. The slide rail serves to carry assembly equipment or table lighting. The tool rail may be fitted with an additional slide rail. If assembly equipment is mounted in combination with table lighting, two slide rails are needed. To raise the load capacity to 30kg a third supporting arm is used. Specification: steel, painted. Colour: light grey RAL7035. Runner: galvanized steel. Nominal width Number of support arms Carrying capacity kg 63.154 800 450 600 2 15 63.155 1200 450 600 2 15 63.156 1600 450 600 2 15 63.157 2000 450 600 2 15 Pivoting tool rail The pivoting tool rail with a ball-bearing runner is attached to the wall element without screws and serves to take assembly equipment. Specification: sheet steel, painted. Colour: light grey RAL7035. Runner: galvanized steel. Equipment rails Carrying capacity kg 63.160 800 75 10 01/2007; LISTA 2007 www.lista.com 23
Accessories for tool rails Slide rail for tool rail and additional supporting arm. Nominal width 63.162 Slide rail 800 63.163 Slide rail 1200 63.164 Slide rail 1600 63.165 Slide rail 2000 63.161 Additional supporting arm 63.279 Slide rail fastening Additional runner 39.475 Additional runner, carrying capacity 2.5kg 24 www.lista.com 01/2007; LISTA 2007
lighting Our lamps represent the latest advances in lighting technology. They won't flicker and are equipped with long-life, energy-saving bulbs. Good lighting enhances productivity, quality and comfort. It reduces fatigue and mistakes. Guarantee lighting: 2 years. Table lighting Suitable for full illumination of the workplace. The entire system is swivel-mounted. Specification: aluminium section, painted. Colour: bright yellow NCS S 0540-Y10R. Power supply with 2 metres of double insulated power cord. With on / off switch. Lamp W Type 63.168 800 1x 55 CH 63.169 1200 2 x 36 CH 63.330 800 1x 55 Schuko 63.331 1200 2 x 36 Schuko Other lamps on request. Lamp bracket for tool rail To provide easy attachment of the lamp to the wall element. Specification: steel, painted. Colour: light grey RAL7035. Adjustment range 63.170 400 78 100 Lamp bracket for wall element To provide attachment of the lamp to the tool rail. Incl. fixing material. Colour: light grey RAL 7035. 63.171 90 95 Local workplace lightening For local workplace illumination. The lamp is swivelmounted and adjustable. The swivel arm is attached to the wall element without screws. Specification: aluminium section, painted. Colour: bright yellow NCS S 0540-Y10R. Power supply with 1.5 metres of doubleinsulated power cord. Incl. swivel arm. Colour: light grey RAL 7035. Lamp W Type 63.172 350 1x 18 CH 63.332 350 1x 18 Schuko 01/2007; LISTA 2007 www.lista.com 25
energy supply Horizontal cable conduit on wall element For tidy organisation of cables and hoses. With covered cable feed-throughs, including four caps for cable feed-throughs and two end pieces. Cable conduit screwed onto wall element, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL7035. 63.189 800 80 80 63.190 1200 80 80 63.191 1600 80 80 63.192 2000 80 80 Corner joint 90 for horizontal cable conduit As joining element for two cable conduits at 90. With fold-out base, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL7035. 63.193 80 / 80 80 T-joint for horizontal cable conduit As joining element for three cable conduits at 90. With fold-out base, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL7035. 63.195 80 80 Cross joint for horizontal cable conduit For joining four cable conduits at 90 each, including fixing material. Specification: sheet steel, painted. Colour: light grey RAL7035. 63.363 80 80 Vertical cable conduit on wall element For supplying energy from the floor to the horizontal cable conduit, incl. fixing material. Specification: sheet steel, painted. Colour: light grey RAL7035. 63.213 1200 80 80 63.214 1600 80 80 63.215 2000 80 80 26 www.lista.com 01/2007; LISTA 2007
Horizontal wall cable conduit For locating transformers and neat organisation of cables and hoses. Attached without screws to wall element or suspended underneath table subelement with crossbeam. Including cable conduit brackets. Specification: sheet steel, painted. Colour: blue NCS S 4040-R80B. Colour of cable conduit brackets: light grey RAL7035. 63.239 800 120 80 63.240 1200 120 80 63.241 1600 120 80 63.242 2000 120 80 Power conduit with safety switch For local power supply at the workplace. The power conduits are attached to the wall element without screws. They may be joined together (jumper cable required). Incl. fixing material. With built-in safety switch. Specification: sheet steel, painted. Colour: light grey RAL7035. Guarantee energy supply: 2 years. Fittings Type 63.105 800 Sockets 4 x 230V, with on / off switch CH 63.109 1200 Sockets 4 x 230V, with on / off switch CH 63.113 1600 Sockets 6 x 230V, with on / off switch CH 63.117 2000 Sockets 6 x 230V, with on / off switch CH 63.121 800 Sockets 4 x 230V, with on / off switch Schuko 63.125 1200 Sockets 4 x 230V, with on / off switch Schuko 63.129 1600 Sockets 6 x 230V, with on / off switch Schuko 63.133 2000 Sockets 6 x 230V, with on / off switch Schuko Other versions on request. Important: The power conduits connected over the jumper cable are not protected by the safety switch. It is possible on customer's request. Cable Picture Type 63.134 Power cable 3000 1 CH 63.135 Jumper cable 500 2 CH/Schuko/F/GB 63.136 Power cable 3000 1 Schuko 1 2 Vertical cable chain For energy supplying. Specification: plastic chain, incl. fixing material. Colour: black. 95.775 800 50 95.776 1200 50 95.777 1800 50 Horizontal / vertical cable junction For joining horizontal and vertical cable conduits. Specification: sheet steel / plastic, painted, including fixing material. Colour: black. 63.094 195 80 01/2007; LISTA 2007 www.lista.com 27
Socket block Specification: Polyamide casing with 5 sockets and on/off switch. Incl. fixing material, with 3 m connecting cable. Mountable in horizontal wall cable conduit. Type 88.598 400 CH 60 40 88.599 400 Schuko 60 40 28 www.lista.com 01/2007; LISTA 2007
assembly Trolleys Basic frame Frame with triangular supports and rubber swivel castors (2 with brakes 100 dia.) to hold shelves and container strips. The basic frame may be fitted with components on one or both sides. Two black handles included. Specification: aluminium sections, painted. Colour: frame aluminium grey metallic NCS S 3502-B, triangular support red NCS S2070-R structure. 63.247 800 1320 790 63.248 800 1720 790 63.249 1200 1320 790 63.250 1200 1720 790 incl. castors (118) Important: Load capacity 300kg with evenly distributed load. Container strips To take storage containers sizes 2, 3 and 4. They are attached to the wall element without screws, horizontally or at an angle of 15. Specification: sheet steel, painted. Colour: light grey RAL7035. For container size Quantity of containers 63.235 800 85 2 7-14 63.235 800 85 3 7 63.235 800 85 4 5 63.235 800 85 BG 1 8 63.235 800 85 BG 2 4 63.236 1200 85 2 11-12 63.236 1200 85 3 11 63.236 1200 85 4 7 63.236 1200 85 BG 1 12 63.236 1200 85 BG 2 6 Load capacity: 25kg Storage containers see chapter component parts. Shelf with raised edging Shelf with raised edging is hung on both sides between the basic frame and foot triangles, and secured with screws. Shelving is restricted at the sides by a raised edge at the front and the foot triangles. Load capacity: 60kg. S pecification: sheet steel, painted. Colour: aluminium grey metallic NCS S3502-B. 63.400 800 25 / 43 700 63.401 1200 25 / 43 700 01/2007; LISTA 2007 www.lista.com 29
Securing brackets for container strip Securing bracket incl. fixing material for container strip. Also for retrofitting. Is fixed to the container strip and prevents the containers becoming detached on uneven floors. Specification: sheet steel, painted. Colour: aluminium grey metallic NCS S3502-B. Nominal width 63.251 800 85 25 63.252 1200 85 25 Rear panels plain The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width 63.089 800 350 20 63.090 1200 350 20 Rear panels slotted The rear panels can be fitted into the wall element without screws and serve to screen or partition particular areas. With 3.6 dia. circular perforation (for M4 x 10 Tapetite self-cutting screws), partitioning 19, and 10 x 10 square perforation, partitioning 38. Specification: sheet steel, painted. Colour: light grey RAL7035. Nominal width 63.223 800 350 20 63.224 1200 350 20 Keyhole hooks see chapter component parts. Adjustable shelves, slotted Shelves are fitted with one longitudinal raised edge which can be mounted either to front or rear. Slit spacing 15 for sub division with partition walls. The shelves are fixed to the wall element without screws, using a pair of brackets, horizontally or at an angle of 30. Specification: sheet steel, painted. Colour: light grey RAL7035. Brackets: sheet steel, painted. Colour: light grey RAL7035. Nominal width Nominal depth 63.390 800 300 63.391 800 350 63.392 1200 300 63.393 1200 350 Thickness : 25 + 17 taised edge Load capacity: 30kg with evenly distributed load. Incl. pair of brackets. 30 www.lista.com 01/2007; LISTA 2007
01/2007; LISTA 2007 www.lista.com 31
SUPERSTRUCTURE UNO THE SINGLE WORKSTATION SYSTEM The Lista Uno single workstation system allows you to tailor the workstation to your own individual requirements. The table is available in fixed height, non-mechanical height-adjustable and continuous, mechanical height-adjustable and hight-adjustable with electric motor versions. The simple construction and flexible multi-purpose back panels make organising the workstation simplicity itself. All accessories are readily combinable, and can be fitted in a few easy steps. Two fixing rails are attached to the underside of the table topfor mounting the drawer cabinet, foot rest, etc. The system range is roundedoff by modular elements, including assembly trolleys and mobile drawer cabinets. The expansion options of thelista Uno workstation system aredetermined bythe individual application. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N 32 www.lista.com 01/2007; LISTA 2007
OVERVIEW Power conduits Power conduits are available for individual requirements. Small parts always to hand Equipment box for standard containers ensure optimalworkingconditions. DIMENSIONS AND LOAD CAPACITIES Attention: Maximumevenly distributed load on table with superstructure: 200kg, table electrically height-adjustable: 150kg. No load capacity at the rear. 01/2007; LISTA 2007 www.lista.com 33
superstructure uno Table structure Support pillars for table system Two support pillar heights are available. The height of 350 or 1000 is measured to the top surface of the table top. The superstructure can be fitted at a spacing of 1000 or 1255 and moves with the table. Specification: steel section, perforated front and rear at a spacing of 50 for screw-free fitting of add-on components. All fixing materials are included in the package (without crossbeam). Colour: light grey RAL 7035. A B Adjustment range C 39.514 350 750 39.515 350 1000 39.512 1000 750 39.513 1000 1000 39.533 350 1500 750 750 39.522 1000 1500 750 750 39.536 350 1750 1000 / 750 750 / 1000 39.525 1000 1750 1000 / 750 750 / 1000 Suitable for 700 and 800 panel depths. Cannot be used with 900 panel depth. Crossbeam Screwed to the feet, stabilises free-standing table subelements. Colour: light grey RAL 7035. Table sub-element width 63.561 1200 175 63.562 1600 175 63.563 2000 175 Not in connection with Lista Uno. Important: When fitting a horizontal wall cable conduit or energy conduit inside a crossbeam, choose a conduit one size smaller than the crossbeam. 34 www.lista.com 01/2007; LISTA 2007
organisational elements Tool rail complete The support arms are screwed to the support pillars and carry the rail section, which is equipped with a ball-bearing mounted carriage. The rail section is freely adjustable to the depth of the workstation. Consisting of two support arms, and rail with runner. Specification: steel. Colour: light grey RAL7035. Carrying Table width capacity kg 39.710 1200 15 39.711 1600 15 39.712 2000 15 Additional tool rails For basic rail units. With mountings. Without runner. Table width 39.072 1200 1100 39.073 1600 1500 39.074 2000 1900 Additional runner 39.475 Additional runner, carrying capacity 2.5kg Plain rear panels Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Specification: sheet steel. Colour: light grey, RAL 7035. 39.356 750 350 39.361 1000 350 Rear panels perforated Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Perforated with round holes Ø 3.6 (for M4 x 10 Taptite self-cutting screws), spacing 19 or square holes 10 x 10, spacing 38. Specification: sheet steel. Colour: light grey, RAL 7035. 90.316 750 350 90.317 1000 350 01/2007; LISTA 2007 www.lista.com 35
Slotted shelves with raised edge Slotted shelves are fitted with raised edge along the rear. Slot spacing 15 for partitioning using dividers. The adjustable shelves are fitted with two brackets horizontally into the supports. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 39.385 750 300 700 295 39.387 750 350 700 345 39.388 1000 300 1000 295 39.389 1000 350 1000 345 Including two brackets each. Max. load: 25kg Shelf height: 25 + 17 strip Dividers For partitioning of the slotted shelves. Specification: sheet steel. Colour: light grey RAL7035. Dividers For shelf depths 100.447 300 95 100.448 300 145 100.449 300 195 100.452 350 95 100.453 350 145 100.454 350 195 The spacing between the shelves is at least 25 more than the height of the separators. Hinged shelves Using the two brackets supplied, hinged shelves are installed in the frame without the need for screws, and are infinitely adjustable between the horizontal and 30. The raised edge at the front and rear stops items dislodging. Specification: sheet steel with clamping lever. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 90.292 750 430 714 424 90.293 1000 430 964 424 Shelf height: 25 + 17 raised edge Carrying capacity: 50kg Single-jointed swivel arm Adjustable for depth and fitted on the support. Can be used for: auxiliary box holder, container shelf, container mountings, monitor shelf. Specification: square steel tube. Colour: light-grey RAL 7035. Carrying capacity kg 39.368 240-380 30 36 www.lista.com 01/2007; LISTA 2007
Double-jointed swivel arm Mounted on the vertical support. Can be used for: auxiliary box holder, container shelf, container mountings, monitor shelf. Specification: square steel tube with double joint. Colour: light-grey RAL 7035. Carrying capacity kg 39.367 ~ 500 30 Attention: The swing arm does not have a conductive paint finish. The equipment box is earthed to the bench using the earthing cable supplied. Monitor shelf Rotating monitor shelf, angle infinitely variable. Extending keyboard stand with stop. Specification: sheet steel. Colour: light grey RAL7035. Carrying capacity kg 39.685 385 340 30 Attention: Only use the monitor shelf for monitors! It is unsuitable for storing ESD-sensitive items. Monitor shelf with double-jointed swivel arm 90.282 Monitor shelf with double-jointed swivel arm, complete Equipement swivel arm Rotating, inserts into the vertical support. Equipment shelf 285 x 285 with raised edge all round. Specification: sheet steel. Colour: light grey RAL7035. Carrying capacity kg 39.482 285 285 5 Auxiliary container rack Three inclined shelves for up to 15 containers of size 3. Carrying handles at side. Can be inserted into the auxiliary box mounting. Specification: sheet steel. Colour: light grey RAL7035. 39.373 530 165 360 Auxiliary container rack mounting With pegs for insertion into swivel arms. Specification: sheet steel. Colour: light grey RAL7035. Carrying capacity kg 39.369 540 170 100 30 01/2007; LISTA 2007 www.lista.com 37
Container strips For containers of size 2, 3 and 4, inserts into supports, no fixing screws required. Specification: sheet steel. Colour: light grey RAL7035. For container size Quantity of containers 39.440 750 85 2, 3, 4 7-14, 7, 5 39.441 1000 85 2, 3, 4 9-18, 9, 6 38 www.lista.com 01/2007; LISTA 2007
lighting Guarantee lighting: 2 years. Waldmann universal light This universal light fixture brings light where you need it. The reflective parabolic grid in the lamp head provides absolutely non-reflective illumination of the work surface. An integrated electronic ballast ensures flicker-free light. Specification: 1 x compact fluorescent light, 36W. Colour: light grey RAL 7035. Working distance Lamp Type Specification 39.884 308 x 118 x 70 500 CH With column mounting 39.885 308 x 118 x 70 500 CH With bench stand 39.891 308 x 118 x 70 500 Schuko With column mounting 39.892 308 x 118 x 70 500 Schuko With bench stand Clip-on magnifying glass for universal light A magnifying glass can be easily clipped on to the body of the light in seconds. This makes the lamp suitable for universal applications, and the clip-on magnifying glass can be used on its own. Lens Magnification 39.886 162 x 109 3 Table lighting The table lighting fixture is attached to the equipment rail using the enclosed fitting materials. The angle of the fixture can be adjusted to provide optimal ergonomic lighting. The reflective parabolic grid in the lamp head ensures bright, uniform, non-reflective illumination. Complete with an electronic ballast. Specification: lamp casing: aluminium. Colour: light grey RAL 7035. Fixing materials and tube included. Lamp W Type 39.882 910 2x 36 CH 39.883 1120 2 x 40 CH 39.889 910 2x 36 Schuko 39.890 1120 2 x 40 Schuko Table lamps A simple lamp on a telescopic arm for table-top mounting. Stem diameter: 13. The arm is 1040 long. Specification: 2 x 15W without electronic ballast. Integral switch. Colour: light grey RAL7035. Lamp Working distance Type Specification 39.887 480 x 60 x 60 400 CH with cable clamp 39.893 480 x 60 x 60 400 Schuko with cable clamp Circular illuminated magnifying glass Simple illuminated magnifying glass with a 3 dioptre optical lens for table-top mounting. Stem diameter: 13. Specification: 22W. Colour: light grey RAL 7035. Lens Magnification Type Specification 39.888 162 x 109 3 CH with cable clamp 39.894 162 x 109 3 Schuko with cable clamp 01/2007; LISTA 2007 www.lista.com 39
Lamp bracket For coercially available lamps with 16 or 18 shaft diameter (with sleeve). Specification: sheet steel, galvanised. Magnification Carrying capacity kg 90.283 23 80 5 Shaft diameter: 16 / 18 40 www.lista.com 01/2007; LISTA 2007
power conduits Power conduits either fit into the support pillars without screws, or screw to the bench top (holes are not pre-drilled). Power conduits are supplied with a choice of sockets: Type 13 (CH version), Schuko, France (Type F) or England (Type GB). All socket types are for 230V. Available with fault-current protective switches (personal protection switches). Each power conduit is supplied with a 3 metre connection cable. Specification: sheet steel, painted / IP-20. Colour: light grey RAL 7035. Guarantee power conduits: 2 years. With safety swtich Type CH Fittings Type 40.268 750 Sockets 4 x 230V, with on / off switch CH 39.874 1000 Sockets 4 x 230V, with on / off switch CH Type Schuko Fittings Type 40.269 750 Sockets 4 x 230V, with on / off switch Schuko 39.875 1000 Sockets 4 x 230V, with on / off switch Schuko Attention: The power conduits connected over the jumper cable are not protected by the safety switch. It is possible on customer's request (note this on the supplier order). Socket block Specification: Polyamide casing with 5 sockets and on/off switch. Incl. fixing material, with 3 m connecting cable. Mountable in horizontal wall cable conduit. Type 88.598 400 CH 60 40 88.599 400 Schuko 60 40 01/2007; LISTA 2007 www.lista.com 41
workstation superstructures Keyhole hooks for square holes To fit rear panels with square holes. Specification: sheet steel. Colour: alu grey. Keyhole hook sets Sets 1 and 2 suitable for minimal tool set, sets 3 and 4 suitable for normal tool sets. 1, 2 Set Quantity 39.282 1 12 39.283 2 18 39.284 3 28 39.285 4 40 3, 4 Tool holder with inclined hook end Diameter 39.397 50 6 39.398 100 6 39.399 150 6 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Inclined hook for lock nut and socket key 39.149 14 / 40 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool holder with vertical hook end Diameter 39.814 35 6 39.288 75 6 39.815 125 6 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool clamp Diameter 39.303 6 39.286 10 39.287 13 39.304 16 39.305 19 Double tool holder with vertical hook end Diameter 39.299 35 35 6 39.300 50 35 6 39.301 75 35 6 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. 42 www.lista.com 01/2007; LISTA 2007
Tool clamp with large base plate Diameter 39.306 25 39.307 28 39.308 32 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Base plate, do-it-yourself mounting / assembly 39.144 Small 39.145 Large Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Magnetic holder Diameter 39.498 40 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Holder for storage bin (single compartments) 39.660 For size 2 and 3 Pipe holder, also suitable for cable, etc. Diameter 39.508 35 60 39.509 35 100 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Pliers / Pincer holder 39.314 35 20 39.315 55 20 39.316 75 20 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Saw holder (used in pairs) 39.661 For 4 saws Price indication per item. The minimum ordering quantity per article is 2 items. Further ordering quantities are only possible in increments of 2 items. Machine holder Diameter 39.317 40 39.318 60 39.319 80 01/2007; LISTA 2007 www.lista.com 43
Cable holder 39.490 150 37 50 39.491 200 37 50 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Screwdriver holder 39.544 For 6 parts 39.545 For 12 parts Holder for storage bin (five compartments) 39.796 550 60 For size 2 and 3 39.797 550 38 For size 2 and 3 Hexagonal socket holder, diameter 1-11 39.662 200 6 Vertical wrench holder 39.695 For 8 wrenches Drill holder / Hexagonal socket holder 39.598 For 14 parts 39.599 For 28 parts Nut retention recess 39.694 390 30 12 holes Vertical wrench holder, for 10 wrenches 39.674 145 / 75 50 220 39.675 225 / 125 50 225 44 www.lista.com 01/2007; LISTA 2007
Combination switch, 2-part 39.734 150 55 Roll retainer holder 39.632 355 100 120 Tool holder for round sockets Diameter 39.736 100 70 Single 39.629 300 70 Triple Shelf 39.697 350 125 Tool adapter for do-it-yourself drilling Top 39.733 390 45 Plastic Steel shelf / Shelf 39.631 435 250 Forms rack for DIN A4 Colour 39.633 220 310 light-grey 01/2007; LISTA 2007 www.lista.com 45
storage containers Size 2 Colour Capacity dm 3 80.737 Red 103 93 52 0.26 80.728 Blue 103 93 52 0.26 80.738 Green 103 93 52 0.26 80.768 Yellow 103 93 52 0.26 Size 3 Colour Capacity dm 3 80.733 Red 103 168 76 0.90 80.729 Blue 103 168 76 0.90 80.724 Green 103 168 76 0.90 80.702 Yellow 103 168 76 0.90 Size 4 Colour Capacity dm 3 80.734 Red 149 233 121 2.70 80.730 Blue 149 233 121 2.70 80.725 Green 149 233 121 2.70 80.721 Yellow 149 233 121 2.70 Size 5 Colour Capacity dm 3 80.735 Red 209 343 200 10.40 80.731 Blue 209 343 200 10.40 80.726 Green 209 343 200 10.40 80.722 Yellow 209 343 200 10.40 Size 6 Colour Capacity dm 3 80.736 Red 313 497 200 23.50 * 80.732 Blue 313 497 200 23.50 * 80.727 Green 313 497 200 23.50 * 80.723 Yellow 313 497 200 23.50 * * These storage bins do only fit diagonally in container cabinets. Accessories For size 2 Number 80.740 Transparent foil 73 11 10 80.739 Labelling strips 73 11 10 For size 3 Number 80.742 Transparent foil 75 20 10 80.741 Labelling strips 75 20 10 46 www.lista.com 01/2007; LISTA 2007
For size 4 / 5 / 6 Number 88.106 Transparent foil 100 35 10 88.105 Labelling strips 100 35 10 01/2007; LISTA 2007 www.lista.com 47
OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material 48 www.lista.com 01/2007; LISTA 2007
Table of content Workbenches Introduction 50 Ordering examples 57 Workbench tops 67 Accesories for workbench tops 75 Workbench leg assemblies Leg assemblies 79 Support consoles 82 Workbench drawer 83 Vice cabinets 84 Vices and height-adjustment units 86 Storage shelves 88 27x36E Drawer cabinets 89 27x36E Sets of partition material for drawers 91 Workbench superstructures Ordering examples 93 Component parts 97 Storage containers 105 Power conduits 108 Hexagonal workbench 110 01/2007; LISTA 2007 www.lista.com 49
WORKBENCHES The classical workplace. With its variety of possible combinations, this system enables practical, space-saving workplace configurations. The organizational possibilities offered byits drawers, vice and support consoles,and multi-purpose back panels, ensure optimum working conditions based on ergonomic insights. Lista, making workspace work. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N 50 www.lista.com 01/2007; LISTA 2007
WORKBENCH TOPS Multiplex tops Product features W orkbench top of steam-treated beech veneer, waterproof cross-clued multilay er,bevelled edges, planed andoiled surface.the topissplash-proof,dirt-repellent and largely insusceptible to oil and grease. A dditional features Sheet metal, steel edge protector, rear and side panels are available on demand. Range of application A ll-purpose foruniversalapplication Beech tops Product features Made of steam-treated beech strips, waterproof clued, bevelled edges, planed and oiled surface. The top is splash-proof, dirt-repellent and largely insusceptible to oil and grease. Additional features Steeledge protector, rear andside panelsare available on demand. Range of application Appropriatefor heavylabour in thesteel and machineconstruction, in metalwork shop, repair shops and schools Urphen tops Product features Utility layer made of compression-proof, durable Urphen.UV finish is resistant to chemicals. Urphen is extremely resistant, splash-proof, dirt-repellent and insusceptible to oil and grease. Additional features Steeledge protector, rear andside panelsare available on demand. Colours: green C / blue O / grey K / red D Hard laminate tops Product features Workbench top resistant to most chemicals, with an easily cleaned, textured surface.top finished with hard laminate of 0.7 thickness. Additional features Rear andside panelsare available on demand. Range of application Appropriate for benches, electronics assembly, office tables and desks. Range of application Appropriate for workstations/assembly areas, inspection stations, desks, packing tables, schools, metalwork shop, precision mechanics, workshops, industry, machine construction, etc. 01/2007; LISTA 2007 www.lista.com 51
WORKBENCH LEG ASSEMBLIES AND SUPERSTRUCTURES Leg assemblies Strong sheet steel design of welded, pressed-steel profiles with holes for securing workbench tops and storage shelves. 2 fixed heights and height-adjustable leg assemblies at 25 to comply with the most various requirements. Mobile version. Carrying capacity max. 400 kg. Drawer cabinets Well proven drawer cabinets in various sizes ideally complement the workbench product range. For tool storage within easy reach of the workstation. Also suitable for mobile workbenches. Support consoles Forelectrical andcompressed air supplies of theworkstation. The support console is prepared for fitting customised equipment. Vice cabinets The vice cabinet consists of ahousing with sliding doors and cylinder lock. The cabinet can be fitted with vice and hinge equipment asrequired. When not in use, thevicecan easilybemovedintothe cabinet under the workbench. Support pillars Supportpillars areavailable in threeheights andwith the help of astabilising steel profile bolted directly to the workbench top or the leg assembly respectively. Supportpillars arerequired foradding adjustable shelves, container strips, power conduits,rear panelsand tool rails. Perforated rear panels Rear panels with smooth surface,round or square holes allow to individually equip the workstation. Keyhole hooks are availablein various specifications. Adjustable shelves Fitted with alongitudinal raised edge,either to frontor rear. Available in planeorslotted version, horizontally or at an angle of 15.Carrying capacity max. 25 kg. Shelves with retainer top To extend the workstation shelf area. -adjustable consoles for 4 different heights. Tool rails Horizontal support arms are inserted into the vertical supports without needing securing screws. They support therails,whichisfittedwith aball-bearingrunner. The rail can be positioned at any workstation depth and easily holds lamps and spring-type equipment. 52 www.lista.com 01/2007; LISTA 2007
DIMENSIONS SUPPORT DISTANCES With 2 or 3 legs assemblies With and without shelf. A A 750/800 100 B 100 100 B B 100 61.5 11.5 725 13.5 Detail A Detail A 20 610 D D D 238 258 40 C 40 40 C 40 50 625 50 Top Support Clear length Top type Hard Number span shelf span A Multiplex Beech Urphen laminate of leg B C D 40 50 50 50 40 assemblies 1250 2 1050 1170 970 1500 2 1300 1420 1220 1750 2 1550 1670 1470 2000 2 1800 1920 1720 2000 3 900 1920 820 2500 2 2300 2420 2220 2500 3 1150 2420 1070 3000 3 1400 2 x 1460 1320 Detail A 100 160 138 60 80 With leg assemblies/drawer cabinet 27x36 E With and without shelf. Workbenches are also available with drawer cabinets in sizes18x27e, 18x36E, 27x27E,36x27Eand 36x36E. A 60 564 D 80 60 100 C 40 Top Support Clear length Top type Hard Number span Shelf span A Multiplex Beech Urphen laminate of leg B C D 40 50 50 50 40 assemblies 1250 1 585 486 1500 1 835 736 1750 1 1085 986 2000 1 1335 1236 2500 1 1835 1736 2500 2 1835 828 3000 2 2335 1078 01/2007; LISTA 2007 www.lista.com 53
DIMENSIONS Dimensions rear / side panels 150 19 750/800 L S 19 19 150 Top thickness Rear panel height S L Top type Multiplex 40 110 50 100 Beech 50 100 Urphen 50 100 Hard laminate 40 110 Adjustable-height shelf M 200 N 200 35 35 20 x " 800-14 20 ø35 x <800 x = Top depth Top Shelf Spacing length M No.of N supports 1250 1250 2 850 1500 1500 2 1100 1750 1750 3 675 2000 2000 3 800 2500 2500 3 1050 3000 3000 4 867 Max. support distance 1100. 54 www.lista.com 01/2007; LISTA 2007
DIMENSIONS Max. bench top load rating per unit area Details applyto auniform static load. D D D D D D Support 750 / 800 span Multiplex Multiplex Beech Urphen Hard laminate D 40 50 50 50 40 kg kg kg kg kg 520 1500 1500 1500 1500 1000 720 1500 1500 1500 1100 650 920 1200 1500 1500 900 450 1120 800 1000 1000 700 350 1320 600 800 800 500 1520 500 700 700 400 1720 350 500 500 300 2220 350 350 Max. clear span 1720 2220 2220 1720 1220 Maximumload rating 400kg usingfixed-height legs and200kg usingmobile workbenchwith castors. 400kg 200kg 01/2007; LISTA 2007 www.lista.com 55
SELECTED COMBINATIONS Workbench leg assembly/drawer cabinet S 60 564 564 185 80 100 60 61.5 750/800 725 13.5 11.5 H F 283 383 533 G 564 693 32 Required height (H) 700 750 800 800 850 850 900 900 950 1000 1050 Workbench leg J 6 E = 800 J 4 E = 850 J 5 E = 700 1050 Required height (H) 700 750 800 800 850 850 900 900 950 1000 1050 Workbench leg B 312 F = 700 B 315 F = 800 B 314 F = 850 B 313 F = 1000 Base G = 50 Base G = 100 Top type Multiplex Beech Urphen Hard laminate Top thickness S 40 50 50 50 40 Workbench leg assembly / support console / vice cabinet S 80 100 60 S 80 100 60 61.5 11.5 750/800 725 I E K E 60 190 60 310 Required height (H) 700 750 800 850 Workbench leg J 6 E = 800 J 4 E = 850 J 5 E = 700-1050 Required height (H) 700 750 800 850 Support console J 23 I = 800 J 25 I = 850 Required height (H) 700 750 800 850 Vice cabinet J 40 K = 800 J 42 K = 850 56 www.lista.com 01/2007; LISTA 2007
workbenches ordering examples 840/850 high Note: The workbenches in these order examples are illustrated with size 27x36E drawer cabinets. Each workbench is also available with drawer cabinets in sizes 18x27E, 18x36E, 27x27E, 36x27E and 36x36E. 2 feet, top 750 Top type 40.961 1500 750 840 Multiplex 40 40.962 1750 750 840 Multiplex 40 40.963 2000 750 840 Multiplex 40 59.030 1500 750 850 Multiplex 50 59.031 1750 750 850 Multiplex 50 59.032 2000 750 850 Multiplex 50 40.955 1500 750 850 Beech 50 40.956 1750 750 850 Beech 50 40.957 2000 750 850 Beech 50 800 Top type 88.297 1500 800 840 Multiplex 40 88.298 1750 800 840 Multiplex 40 88.299 2000 800 840 Multiplex 40 88.141 1500 800 850 Beech 50 88.142 1750 800 850 Beech 50 88.143 2000 800 850 Beech 50 88.144 1500 800 850 Urphen 50 88.145 1750 800 850 Urphen 50 88.146 2000 800 850 Urphen 50 1 workbench top 2 workbench leg assemblies J6 2 feet, top, storage shelf 750 Top type 59.000 1250 750 840 Multiplex 40 59.001 1500 750 840 Multiplex 40 59.002 1750 750 840 Multiplex 40 59.003 2000 750 840 Multiplex 40 59.004 2500 750 840 Multiplex 40 * 59.165 1250 750 850 Multiplex 50 59.166 1500 750 850 Multiplex 50 59.167 1750 750 850 Multiplex 50 59.375 2000 750 850 Multiplex 50 59.376 2500 750 850 Multiplex 50 ** 59.355 1250 750 850 Beech 50 59.356 1500 750 850 Beech 50 59.357 1750 750 850 Beech 50 59.358 2000 750 850 Beech 50 59.359 2500 750 850 Beech 50 ** 01/2007; LISTA 2007 www.lista.com 57
800 Top type 59.160 1250 800 840 Multiplex 40 59.161 1500 800 840 Multiplex 40 59.162 1750 800 840 Multiplex 40 59.163 2000 800 840 Multiplex 40 59.164 2500 800 840 Multiplex 40 * 59.360 1250 800 850 Beech 50 59.361 1500 800 850 Beech 50 59.362 1750 800 850 Beech 50 59.363 2000 800 850 Beech 50 59.364 2500 800 850 Beech 50 ** 59.370 1250 800 850 Urphen 50 59.371 1500 800 850 Urphen 50 59.372 1750 800 850 Urphen 50 59.373 2000 800 850 Urphen 50 59.374 2500 800 850 Urphen 50 * 1 workbench top 2 workbench leg assemblies J6 1 storage shelf * with 3 workbench leg assemblies ** with strut 2 feet, top, workbench drawer 750 Drawer: 150 EA Top type 40.934 1500 750 840 Multiplex 40 40.935 1750 750 840 Multiplex 40 40.936 2000 750 840 Multiplex 40 59.377 1500 750 850 Multiplex 50 59.378 1750 750 850 Multiplex 50 59.379 2000 750 850 Multiplex 50 40.928 1500 750 850 Beech 50 40.929 1750 750 850 Beech 50 40.930 2000 750 850 Beech 50 800 Top type 59.195 1500 800 840 Multiplex 40 59.196 1750 800 840 Multiplex 40 59.197 2000 800 840 Multiplex 40 59.189 1500 800 850 Beech 50 59.190 1750 800 850 Beech 50 59.191 2000 800 850 Beech 50 59.192 1500 800 850 Urphen 50 59.193 1750 800 850 Urphen 50 59.194 2000 800 850 Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 workbench drawer J12 2 feet, top, B309 750 Drawers: 50 EA; 150 EA Top type 59.042 1500 750 840 Multiplex 40 59.043 1750 750 840 Multiplex 40 59.044 2000 750 840 Multiplex 40 59.033 1500 750 850 Multiplex 50 59.034 1750 750 850 Multiplex 50 59.035 2000 750 850 Multiplex 50 59.036 1500 750 850 Beech 50 59.037 1750 750 850 Beech 50 59.038 2000 750 850 Beech 50 58 www.lista.com 01/2007; LISTA 2007
800 Top type 59.207 1500 800 840 Multiplex 40 59.208 1750 800 840 Multiplex 40 59.209 2000 800 840 Multiplex 40 59.201 1500 800 850 Beech 50 59.202 1750 800 850 Beech 50 59.203 2000 800 850 Beech 50 59.204 1500 800 850 Urphen 50 59.205 1750 800 850 Urphen 50 59.206 2000 800 850 Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 drawer cabinet B309, 14.434 2 feet, top, B310 750 Top type 59.005 1500 750 840 Multiplex 40 59.006 1750 750 840 Multiplex 40 59.007 2000 750 840 Multiplex 40 59.045 1500 750 850 Multiplex 50 59.046 1750 750 850 Multiplex 50 59.047 2000 750 850 Multiplex 50 59.048 1500 750 850 Beech 50 59.049 1750 750 850 Beech 50 59.050 2000 750 850 Beech 50 Drawers: 50 EA; 100 EA; 150 EA 800 Top type 59.219 1500 800 840 Multiplex 40 59.220 1750 800 840 Multiplex 40 59.221 2000 800 840 Multiplex 40 59.213 1500 800 850 Beech 50 59.214 1750 800 850 Beech 50 59.215 2000 800 850 Beech 50 59.216 1500 800 850 Urphen 50 59.217 1750 800 850 Urphen 50 59.218 2000 800 850 Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 drawer cabinet B310, 14.437 2 feet, top, B311 750 Top type 59.063 1500 750 840 Multiplex 40 59.064 1750 750 840 Multiplex 40 59.065 2000 750 840 Multiplex 40 59.198 1500 750 850 Multiplex 50 59.199 1750 750 850 Multiplex 50 59.200 2000 750 850 Multiplex 50 59.057 1500 750 850 Beech 50 59.058 1750 750 850 Beech 50 59.059 2000 750 850 Beech 50 Drawers: 50 EA; 75 EA; 125 EA; 200 EA 01/2007; LISTA 2007 www.lista.com 59
800 Top type 59.231 1500 800 840 Multiplex 40 59.232 1750 800 840 Multiplex 40 59.233 2000 800 840 Multiplex 40 59.225 1500 800 850 Beech 50 59.226 1750 800 850 Beech 50 59.227 2000 800 850 Beech 50 59.228 1500 800 850 Urphen 50 59.229 1750 800 850 Urphen 50 59.230 2000 800 850 Urphen 50 1 workbench top 2 workbench leg assemblies J6 1 drawer cabinet B311, 14.442 Foot, top, B312, storage shelf 750 Drawers: 75 EA; 100 EA; 125 EA; 300 EA Top type 59.010 1500 750 840 Multiplex 40 59.011 1750 750 840 Multiplex 40 59.012 2000 750 840 Multiplex 40 59.222 1500 750 850 Multiplex 50 59.223 1750 750 850 Multiplex 50 59.224 2000 750 850 Multiplex 50 59.089 1500 750 850 Beech 50 59.090 1750 750 850 Beech 50 59.091 2000 750 850 Beech 50 800 Top type 59.267 1500 800 840 Multiplex 40 59.268 1750 800 840 Multiplex 40 59.269 2000 800 840 Multiplex 40 59.261 1500 800 850 Beech 50 59.262 1750 800 850 Beech 50 59.263 2000 800 850 Beech 50 59.264 1500 800 850 Urphen 50 59.265 1750 800 850 Urphen 50 59.266 2000 800 850 Urphen 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B312 incl. housing base 100, 15.764 1 storage shelf Foot, top, B315 750 Drawers: 75 EA; 100 EA; 100 EA; 150 EA; 300 EA Top type 40.970 1500 750 840 Multiplex 40 40.971 1750 750 840 Multiplex 40 40.972 2000 750 840 Multiplex 40 59.066 1500 750 850 Multiplex 50 59.067 1750 750 850 Multiplex 50 59.068 2000 750 850 Multiplex 50 40.964 1500 750 850 Beech 50 40.965 1750 750 850 Beech 50 40.966 2000 750 850 Beech 50 60 www.lista.com 01/2007; LISTA 2007
800 Top type 88.300 1500 800 840 Multiplex 40 88.301 1750 800 840 Multiplex 40 88.302 2000 800 840 Multiplex 40 39.719 1500 800 850 Beech 50 39.720 1750 800 850 Beech 50 39.721 2000 800 850 Beech 50 88.123 1500 800 850 Urphen 50 88.124 1750 800 850 Urphen 50 88.125 2000 800 850 Urphen 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B315, 14.449 Foot, top, B315 750 Top type 59.015 1500 750 840 Multiplex 40 59.016 1750 750 840 Multiplex 40 59.017 2000 750 840 Multiplex 40 59.210 1500 750 850 Multiplex 50 59.211 1750 750 850 Multiplex 50 59.212 2000 750 850 Multiplex 50 59.069 1500 750 850 Beech 50 59.070 1750 750 850 Beech 50 59.071 2000 750 850 Beech 50 Drawers: 50 EA; 100 EA; 100 EA; 100 EA; 150 EA; 200 EA 800 Top type 59.243 1500 800 840 Multiplex 40 59.244 1750 800 840 Multiplex 40 59.245 2000 800 840 Multiplex 40 59.237 1500 800 850 Beech 50 59.238 1750 800 850 Beech 50 59.239 2000 800 850 Beech 50 59.240 1500 800 850 Urphen 50 59.241 1750 800 850 Urphen 50 59.242 2000 800 850 Urphen 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B315, 18.696 Support console, plate, B315 750 Top type 40.979 1500 750 840 Multiplex 40 40.980 2000 750 840 Multiplex 40 40.981 2500 750 840 Multiplex 40 59.234 1500 750 850 Multiplex 50 59.235 2000 750 850 Multiplex 50 59.236 2500 750 850 Multiplex 50 40.973 1500 750 850 Beech 50 40.974 2000 750 850 Beech 50 40.975 2500 750 850 Beech 50 Drawers: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA 01/2007; LISTA 2007 www.lista.com 61
800 Top type 88.303 1500 800 840 Multiplex 40 88.304 1750 800 840 Multiplex 40 88.305 2000 800 840 Multiplex 40 39.722 1500 800 850 Beech 50 39.723 1750 800 850 Beech 50 39.724 2000 800 850 Beech 50 88.129 1500 800 850 Urphen 50 88.130 1750 800 850 Urphen 50 88.131 2000 800 850 Urphen 50 1 workbench top 1 support console J23 1 drawer cabinet B315, 14.449 Drawers on the left side: 75 EA; 75 EA; 100 EA; 100 EA; 150 EA; 200 EA Drawers on the right side: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA Top, B315, B315 750 Top type 40.989 2000 750 840 Multiplex 40 40.990 2500 750 840 Multiplex 40 40.982 2000 750 850 Multiplex 50 40.988 2500 750 850 Multiplex 50 40.983 2000 750 850 Beech 50 40.984 2500 750 850 Beech 50 800 Top type 88.306 1750 800 840 Multiplex 40 88.307 2000 800 840 Multiplex 40 88.308 2500 800 840 Multiplex 40 39.725 1750 800 850 Beech 50 39.726 2000 800 850 Beech 50 39.727 2500 800 850 Beech 50 88.135 1750 800 850 Urphen 50 88.136 2000 800 850 Urphen 50 88.137 2500 800 850 Urphen 50 1 workbench top 2 drawer cabinets B315, 14.450 / 14.449 Drawers: 50 EA; 100 EA; 150 EA 2 feet, 1 x wheels, top, B310, vice 750 Top type 40.889 1250 750 840 Multiplex 40 40.890 1500 750 840 Multiplex 40 40.891 2000 750 840 Multiplex 40 59.086 1250 750 850 Multiplex 50 59.087 1500 750 850 Multiplex 50 59.088 2000 750 850 Multiplex 50 40.886 1250 750 850 Beech 50 40.887 1500 750 850 Beech 50 40.888 2000 750 850 Beech 50 1 workbench top 1 workbench leg assembly with handle 1 workbench leg assembly with fixed castors 1 strut 1 Heuer-vice, jaw width 120 1 drawer cabinet B310, 14.437 62 www.lista.com 01/2007; LISTA 2007
Foot, vice cabinet, top, B310 750 Top type 40.845 1500 750 840 Multiplex 40 40.846 2000 750 840 Multiplex 40 59.246 1500 750 850 Multiplex 50 59.247 2000 750 850 Multiplex 50 59.248 2500 750 850 Multiplex 50 59.076 1500 750 850 Beech 50 59.077 2000 750 850 Beech 50 59.078 2500 750 850 Beech 50 1 workbench top 1 workbench leg assembly J6 1 vice cabinet J40 (with Heuer vice, 120 jaw width, with height adjustment unit) 1 drawer cabinet B310, 14.437 Drawers: 50 EA; 100 EA; 150 EA Foot, top, B315 with door 750 Top type 59.276 1500 750 840 Multiplex 40 59.277 1750 750 840 Multiplex 40 59.278 2000 750 840 Multiplex 40 59.054 1500 750 850 Multiplex 50 59.055 1750 750 850 Multiplex 50 59.056 2000 750 850 Multiplex 50 59.079 1500 750 850 Beech 50 59.080 1750 750 850 Beech 50 59.081 2000 750 850 Beech 50 1 workbench top 1 workbench leg assembly J6 1 drawer cabinet B315, 18.694 AB = pull-out shelf Drawers: 50 EA; 100 EA; 100 EA; 450; AB Top, B315, B315 with door 750 Top type 59.271 2000 750 840 Multiplex 40 59.100 2500 750 840 Multiplex 40 59.272 2000 750 850 Multiplex 50 59.101 2500 750 850 Multiplex 50 59.270 2000 750 850 Beech 50 59.099 2500 750 850 Beech 50 1 workbench top 2 drawer cabinets B315, 14.452 / 14.454 VB = adjustable shelf AB = pull-out shelf Drawers on the left side: 50 EA; 75 EA; 75 EA; 100 EA; 100 EA; 100 EA; 100 EA; 100 EA Drawers on the right side: 100 EA; 600; VB; AB Foot, top, B315, B315 750 Top type 59.259 3000 750 840 Multiplex 40 * 59.260 3000 750 850 Multiplex 50 * 59.258 3000 750 850 Beech 50 1 workbench top 1 workbench leg assembly J6 2 drawer cabinets B315, 14.450 / 14.449 * Multiplex workbench top butt-jointed (2 x 1500) Drawers on the left side: 75 EA; 75 EA; 100 EA; 100 EA; 150 EA; 200 EA Drawers on the right side: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA 01/2007; LISTA 2007 www.lista.com 63
Top, B315, B315, B315 with door 750 Drawers on the left side: 50 EA; 75 EA; 75 EA; 100 EA; 100 EA; 100 EA; 100 EA; 100 EA Centre drawers: 50 EA; 100 EA; 100 EA; 150 EA; 300 EA Drawers on the right side: 100 EA; 600; VB; AB Top type 59.097 3000 750 840 Multiplex 40 * 59.098 3000 750 850 Multiplex 50 * 59.096 3000 750 850 Beech 50 1 workbench top 3 drawer cabinets B315, 14.452 / 14.449 / 14.454 * Multiplex workbench top butt-jointed (2 x 1500) VB = adjustable shelf AB = pull-out shelf 64 www.lista.com 01/2007; LISTA 2007
ordering examples 890/900 high Note: The workbenches in these order examples are illustrated with size 27x36E drawer cabinets. Each workbench is also available with drawer cabinets in sizes 18x27E, 18x36E, 27x27E, 36x27E and 36x36E. 2 feet, top 800 Top type 88.328 1500 800 890 Multiplex 40 88.329 1750 800 890 Multiplex 40 88.330 2000 800 890 Multiplex 40 88.326 1500 800 900 Beech 50 88.222 1750 800 900 Beech 50 88.223 2000 800 900 Beech 50 88.327 1500 800 900 Urphen 50 88.225 1750 800 900 Urphen 50 88.226 2000 800 900 Urphen 50 1 workbench top 2 workbench leg assemblies J4 Foot, top, B314 800 Top type 88.090 1500 800 890 Multiplex 40 88.331 1750 800 890 Multiplex 40 88.084 2000 800 890 Multiplex 40 88.085 2500 800 890 Multiplex 40 39.758 1750 800 900 Beech 50 39.759 2000 800 900 Beech 50 39.760 2500 800 900 Beech 50 88.231 1750 800 900 Urphen 50 88.232 2000 800 900 Urphen 50 88.233 2500 800 900 Urphen 50 1 workbench top 1 workbench leg assembly J4 1 drawer cabinet B314, 14.455 Drawers: 50 EA; 100 EA; 100 EA; 200 EA; 300 EA Support console, plate, B314 800 Top type 88.332 1750 800 890 Multiplex 40 88.333 2000 800 890 Multiplex 40 88.334 2500 800 890 Multiplex 40 39.761 1750 800 900 Beech 50 39.762 2000 800 900 Beech 50 39.763 2500 800 900 Beech 50 88.237 1750 800 900 Urphen 50 88.238 2000 800 900 Urphen 50 88.239 2500 800 900 Urphen 50 1 workbench top 1 support console J25 1 drawer cabinet B314, 14.455 Drawers: 50 EA; 100 EA; 100 EA; 200 EA; 300 EA 01/2007; LISTA 2007 www.lista.com 65
Drawers on the left side: 75 EA; 100 EA; 100 EA; 100 EA; 125 EA; 250 EA Drawers on the right side: 50 EA; 100 EA; 100 EA; 200 EA; 300 EA Top, B314, B314 800 Top type 88.335 1750 800 890 Multiplex 40 88.336 2000 800 890 Multiplex 40 88.337 2500 800 890 Multiplex 40 39.764 1750 800 900 Beech 50 39.765 2000 800 900 Beech 50 39.766 2500 800 900 Beech 50 88.243 1750 800 900 Urphen 50 88.244 2000 800 900 Urphen 50 88.245 2500 800 900 Urphen 50 1 workbench top 2 drawer cabinets B314, 14.456 / 14.455 66 www.lista.com 01/2007; LISTA 2007
workbench Tops multiplex Tops,40 / 50 Thickness Note Other workbench top specifications and dimensions on request. Steam-treated beech veneer, waterproof glued multilayer (DIN 68 705), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. Multiplex tops, 40 / 50 thickness 750 Top length Top thickness Top depth 40.024 1250 40 750 40.025 1500 40 750 40.026 1750 40 750 40.027 2000 40 750 40.028 2500 40 750 40.044 1250 50 750 40.045 1500 50 750 40.046 1750 50 750 40.047 2000 50 750 40.048 2500 50 750 800 Top length Top thickness Top depth 40.992 1250 40 800 39.035 1500 40 800 39.899 1750 40 800 39.037 2000 40 800 39.039 2500 40 800 40.184 1250 50 800 40.185 1500 50 800 40.186 1750 50 800 40.187 2000 50 800 40.188 2500 50 800 Multiplex tops with rear panel, 40 / 50 thickness Rear panel height 150, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top thickness Top depth 40.029 1250 40 750 40.030 1500 40 750 40.031 1750 40 750 40.032 2000 40 750 40.033 2500 40 750 40.049 1250 50 750 40.050 1500 50 750 40.051 1750 50 750 40.052 2000 50 750 40.053 2500 50 750 01/2007; LISTA 2007 www.lista.com 67
800 Top length Top thickness Top depth 40.993 1250 40 800 39.904 1500 40 800 39.905 1750 40 800 39.906 2000 40 800 39.907 2500 40 800 40.189 1250 50 800 40.190 1500 50 800 40.191 1750 50 800 40.192 2000 50 800 40.193 2500 50 800 Multiplex tops with angled steel edge protection at front, 40 / 50 thickness 750 Top length Top thickness Top depth 40.034 1250 40 750 40.035 1500 40 750 40.036 1750 40 750 40.037 2000 40 750 40.038 2500 40 750 40.054 1250 50 750 40.055 1500 50 750 40.056 1750 50 750 40.057 2000 50 750 40.058 2500 50 750 800 Top length Top thickness Top depth 40.994 1250 40 800 39.767 1500 40 800 39.916 1750 40 800 39.768 2000 40 800 39.769 2500 40 800 40.194 1250 50 800 40.195 1500 50 800 40.196 1750 50 800 40.197 2000 50 800 40.198 2500 50 800 Multiplex tops with angled steel edge protection at front and rear panel, 40 / 50 thickness Rear panel height 150, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top thickness Top depth 40.039 1250 40 750 40.040 1500 40 750 40.041 1750 40 750 40.042 2000 40 750 40.043 2500 40 750 40.059 1250 50 750 40.060 1500 50 750 40.061 1750 50 750 40.062 2000 50 750 40.063 2500 50 750 68 www.lista.com 01/2007; LISTA 2007
800 Top length Top thickness Top depth 40.995 1250 40 800 39.921 1500 40 800 39.922 1750 40 800 39.923 2000 40 800 39.924 2500 40 800 40.199 1250 50 800 40.200 1500 50 800 40.201 1750 50 800 40.202 2000 50 800 40.203 2500 50 800 01/2007; LISTA 2007 www.lista.com 69
beech Tops,50 Thickness Information on quality and storage: Lista guarantees that its beech timbers are in perfect quality when they leave our factory. This is a naturel wood product. Knots or markings occur on the underside of the timbers. The timbers must be stored horizontally, on a flat base, dry, protected from the weather and covered on both sides. Fluctuations in humidity should be avoided. Steam-treated beech strips, waterproof glued (adhesive class D3), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. The surface may exhibit slight wood colouring and swirls (DIN 68705 quality class 1). Beech tops, 50 thickness 750 Top length Top depth 40.000 1250 750 40.001 1500 750 40.002 1750 750 40.003 2000 750 40.004 2500 750 40.005 3000 750 800 Top length Top depth 40.996 1250 800 39.015 1500 800 39.016 1750 800 39.017 2000 800 39.018 2500 800 39.019 3000 800 Beech tops with rear panel, 50 thickness Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth 40.006 1250 750 40.007 1500 750 40.008 1750 750 40.009 2000 750 40.010 2500 750 40.011 3000 750 800 Top length Top depth 40.997 1250 800 39.783 1500 800 39.784 1750 800 39.785 2000 800 39.786 2500 800 39.787 3000 800 70 www.lista.com 01/2007; LISTA 2007
Beech tops with angled steel edge protection at front, 50 thickness 750 Top length Top depth 40.012 1250 750 40.013 1500 750 40.014 1750 750 40.015 2000 750 40.016 2500 750 40.017 3000 750 800 Top length Top depth 40.998 1250 800 39.329 1500 800 39.330 1750 800 39.331 2000 800 39.332 2500 800 39.333 3000 800 Beech tops with angled steel edge protection at front and rear panel, 50 thickness Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth 40.018 1250 750 40.019 1500 750 40.020 1750 750 40.021 2000 750 40.022 2500 750 40.023 3000 750 800 Top length Top depth 40.999 1250 800 39.803 1500 800 39.804 1750 800 39.805 2000 800 39.806 2500 800 39.807 3000 800 01/2007; LISTA 2007 www.lista.com 71
urphen Tops,50 Thickness Note: Other workbench top specifications and dimensions on request. Utility layer made of compression-proof, durable Urphen with a gross density of >1000kg/m 3. UV finish is resistant to chemicals (complies with DIN 68 861-1A). Urphen is extremely resistant, splash-proof, dirt-repellent and insusceptible to oil and grease. Centre core of stiff compressed chipboard, quality class E1 (DIN 68 761). Backed with hard particle board and beech edging. Colors: green C / blue O / grey K / red D Urphen tops, 50 thickness With hardwood edging on all-sides. 750 Top length Top depth 40.065 1250 750 40.066 1500 750 40.067 1750 750 40.068 2000 750 40.069 2500 750 40.070 3000 ** 750 800 Top length Top depth 40.906 1250 800 39.023 1500 800 39.024 1750 800 39.025 2000 800 39.026 2500 800 39.027 3000 ** 800 ** One-piece centre core, top butt-jointed at centre! Urphen tops with rear panel, 50 thickness With hardwood edging on 3 sides. Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth 40.071 1250 750 40.072 1500 750 40.073 1750 750 40.074 2000 750 40.075 2500 750 40.076 3000 ** 750 800 Top length Top depth 40.905 1250 800 39.634 1500 800 39.635 1750 800 39.636 2000 800 39.637 2500 800 39.638 3000 ** 800 ** One-piece centre core, top butt-jointed at centre! 72 www.lista.com 01/2007; LISTA 2007
Urphen tops with angled steel edge protection at front, 50 thickness With hardwood edging on all-sides. 750 Top length Top depth 40.077 1250 750 40.078 1500 750 40.079 1750 750 40.080 2000 750 40.081 2500 750 40.082 3000 ** 750 800 Top length Top depth 40.907 1250 800 39.603 1500 800 39.604 1750 800 39.605 2000 800 39.606 2500 800 39.607 3000 ** 800 ** One-piece centre core, top butt-jointed at centre! Urphen tops with angled steel edge protection at front and rear panel, 50 thickness Rear panel height from surface of workbench top 100, thickness 19. Rear panel from MDF (medium density fibreboard). 750 Top length Top depth 40.083 1250 750 40.084 1500 750 40.085 1750 750 40.086 2000 750 40.087 2500 750 40.088 3000 ** 750 800 Top length Top depth 40.908 1250 800 39.649 1500 800 39.650 1750 800 39.651 2000 800 39.652 2500 800 39.653 3000 ** 800 ** One-piece centre core, top butt-jointed at centre! 01/2007; LISTA 2007 www.lista.com 73
hard laminated Tops,40 Thickness Note: Other workbench top specifications and dimensions on request. Workbench top resistant to most chemicals and an easy-to-clean structured surface. Top finished in hard laminate (HPL 0,7, DIN 16 926 / EN 438). Centre core of stiff compressed chipboard, almost distortion free. Quality class E1 (DIN 68 761). Backed with laminated. Hard laminated tops light grey, 40 thickness Back laminated, with grey adhesive edging. Laminate colour: top light grey NCS S 1500-N. 750 Top length Top depth 39.082 1500 750 39.083 2000 750 39.134 2500 750 39.084 3000 750 800 Top length Top depth 39.052 1500 800 39.076 2000 800 39.135 2500 800 39.086 3000 800 74 www.lista.com 01/2007; LISTA 2007
accessories for workbench Tops Angled steel edge protection Edge protector set into workbench top, assembly complete. Specification: sheet steell. Colour: grey NCS S-4502-B. For top thickness. 39.152 Angled steel edge 38 / 48 40 / 50 per lm protection (L-profile) 39.032 Angled steel edge protection (U-profile)* 50 50 per lm * Urphen tops Welded corners for steel edge protection If steel edge protection continues over one or more corners of the workbench top, a welded corner must be included for each one. Picture Number 39.298 Welded corner 1, 2, 3 1, 2, 4 Metal cover Metal covering for multiplex tops, with or without rear panel. 41.997 Stainless steel cover 1.5 per m² 41.998 Aluminium cover 2 per m² 41.999 Metal steel cover 1.5, sendzimir galvanised per m² Calculation schematic: all dimensions in metres, rear panel height 150! E: Cover for workbench top surface = nominal depth x top length F: Cover for workbench top surface with rear panel = (0.15 + nominal depth) x top length Caution: Danger of corrosion with sendzimir galvanised steel. Recoendation: stainless steel cover. Variante F Variante E Max. special sizes Multiplex tops 40 39.344 Multiplex tops 40, surface treated, bevelled edges Max. support distances 1800 Max. lenght Thickness 2500 1000 40 per m² Multiplex tops 50 41.995 Multiplex tops 50, surface treated, bevelled edges Max. support distances 2300 Max. lenght Thickness 2500 1000 50 per m² 01/2007; LISTA 2007 www.lista.com 75
Beech top Max. lenght Thickness 39.020 Beech tops, surface treated, bevelled 3200 1000 50 per m² edges Max. support distances 2300 Urphen top Max. lenght Thickness 39.957 Urphen tops, 3500 1000 50 per m² without edges 39.031 Urphen tops, hardwood edging 3500 1000 3 per lm Max. support distances 1800. ** From 2500 top, finish butt-joined at centre, one-piece core Hard laminate top Max. lenght Thickness 39.056 Hard laminate 3000 1000 40 per m² tops, top green, with edges black 39.085 Hard laminate tops, top light grey with edges grey 3000 1000 40 per m² Max. support distances 1220 Rear panels Rear panels are bolted to workbench top (multiplex, beech), including fastening material. Rear panels are delivered as loose elements. Specification: MDF (medium density fibre) board, height 150, transparent primer finish. For workbench length Thickness 40.089 1250 1250 19 39.171 1500 1500 19 39.172 1750 1750 19 39.173 2000 2000 19 39.174 2500 2500 19 39.175 3000 3000 19 39.187 3500 max. 19 per lm Side panels Side panels are bevelled at the front and bolted to workbench top (multiplex, beech), including fastening material. Specification: MDF (medium density fibre) board, height 150, transparent primer finish. For workbench length Thickness 40.064 750 769 19 39.194 800 819 19 39.199 1269 max. 19 per lm 76 www.lista.com 01/2007; LISTA 2007
Shelves with raised edging Specification: MDF (medium density fibre) board with 8 raised beech edging on rear and sides, transparent primer finish all-round, without brackets. For top length Thickness Brakets needed 40.095 1250 300 19 2 39.209 1500 300 19 2 39.210 1750 300 19 3 39.211 2000 300 19 3 39.212 2500 300 19 3 39.213 3000 300 19 4 39.214 per lm Max. support distance: 1100. -adjustable brackets Brackets allow adjustment of raised-edge shelf to four different heights. Bolted through workbench top (preassembly required). Specification: square steel tube, including fastening material. Colour: light grey RAL 7035. Adjustable-height above top 39.207 230, 270, 310, 350 280 39.208 Pre-assembly per bracket 01/2007; LISTA 2007 www.lista.com 77
workbench connectors Connecting bracket over workbench leg assembly Connects two workbenches flush with a wooden spring and groove above the workbench leg assembly. Kit includes: groove and wooden spring, including 2 tensioning screws for workbench leg assembly. Top depth Spring length Spring width Thickness 39.030 650-799 630 20 4 39.021 800-1000 730 20 4 Connecting bracket above cabinet Butt joint suitable for drawer cabinet (free-standing), support console or vice cabinet. Connects workbench top flush with wooden spring and groove above the cabinet for workbenches arranged back-to-back or in a row. Kit includes: groove and wooden spring. 13 Top depth Spring length Spring width Thickness 107.277 650-799 630 20 4 107.276 800-1000 730 20 4 Connector plate Connects the 90 extension to the work top. Secured with sleeves and hexagon head screws, including fastening material. Made of sheet steel. Colour: light grey RAL 7035. Thickness 39.204 500 100 28 3 Workbench top connectors with tensioner Workbench tops can be securely joined on the underside using insert tensioners. The required cut-outs are included. Workbench top connectors in steel. Incl. preassembly. Top length 40.165 65 40.166 150 * * For workbench tops with chipboard centre core (ESA). Pre-assembly to workbench top 39.206 Pre-assembly to workbench top 78 www.lista.com 01/2007; LISTA 2007
workbench leg assemblies leg assemblies Fixed-height and adjustable height leg assemblies The Lista workbench assembly is a strong sheet steel design of welded, pressed steel profiles with holes for securing the workbench top. Holes are also provided in the base for anchoring to the floor. Specification: sheet steel. Colour: according to colour chart. Type Carrying capacity kg 39.142 J6 80 725 800 400 39.151 J4 80 725 850 400 39.154 J5 * 80 725 700-1050 400 * -adjustable at 25 increments Struts Struts to match leg assembly, including fastening material. Specification: sheet steel. Colour: according to colour chart. For top length Strut length 40.909 1250 974 40.897 1500 1224 40.898 1750 1474 40.899 2000 1724 40.833 2000 * 1648 (2 x 824) 40.900 2500 2224 40.834 2500 * 2148 (2 x 1074) 40.835 3000 * 2648 (2 x 1324) * Bench top single- or two-piece with 3 workbench leg assemblies, two-piece struts. Fastening material 39.326 Fastening material with 6 screws without pre-assembly 39.327 Fastening material (6 screws) including pre-assembly Workbench leg assembly, adjustable height Workbench leg assembly for workstations, easy height adjustment for bench tops under load. adjustment by means of 4 hydraulic cylinders integrated into the two assemblies and driven by a hydraulic pump with folding crank mounted under the workbench top. Workbench top according to workstation requirements. Fully assembled. Specification: sheet steel. Colour: according to colour chart. Leg assembly for bench top size Minimum height Adjustment range Carrying capacity kg 39.701 2000 x 750 / 800 90 725 700 200 350 01/2007; LISTA 2007 www.lista.com 79
Mobile leg assemblies, fixed height Mobile workbench leg assemblies, made up as required from leg assembly with handle, leg assembly with fixed castors, or leg assembly with swivel castors and handle. Depending on the type of floor, either nylon or rubber castors are available. Workbench top according to workstation requirements. Matching vice and drawer cabinet complement this workstation optimally. Specification: sheet steel. Colour: according to colour chart. With handle Carrying capacity kg 40.892 80 725 800 400 With 2 fixed castors Execution Wheel Ø Carrying capacity kg 40.893 Nylon 80 725 800 100 200 40.894 Rubber 80 725 800 100 200 With 2 swivel castors Execution Wheel Ø Carrying capacity kg 40.160 Nylon 80 725 800 100 200 40.159 Rubber 80 725 800 100 200 With 2 swivel castors and handle Execution Wheel Ø Carrying capacity kg 40.895 Nylon 80 725 800 100 200 40.896 Rubber 80 725 800 100 200 Mobile leg assemblies, adjustable height Leg assemblies for adjustable-height workbenches, with two locking swivel castors or two fixed castors. Depending on the type of floor, either nylon or rubber castors are available. Workbench top according to workstation requirements. Specification: sheet steel. Colour: according to colour chart. With 2 fixed castors Execution Wheel Ø Carrying capacity kg 39.770 Nylon 80 725 700-1050 100 200 39.965 Rubber 80 725 700-1050 100 200 80 www.lista.com 01/2007; LISTA 2007
With 2 swivel castors Execution Wheel Ø Carrying capacity kg 39.771 Nylon 80 725 700-1050 100 200 39.966 Rubber 80 725 700-1050 100 200 Keyhole hooks for square holes 39.326 Fastening material with 6 screws without pre-assembly 39.327 Fastening material (6 screws) including pre-assembly 01/2007; LISTA 2007 www.lista.com 81
support consoles Support consoles The support console consists of a casing with side doors and cylinder lock. Partition for compressed air connection inside the upper section. Two vertical C profiles are provided in the lower section for distributors, contactors, transformers etc. Cut-outs in the front panel are intended for blank covers or sockets. Power and air supply holes in the side and base. The support console is designed for installation at the left or right and includes one blank cover. Specification: sheet steel. Colour: according to colour chart. Type 88.406 J23 Door mounted at 190 725 800 right 88.407 J23 Door mounted at left 190 725 800 88.410 J25 Door mounted at 190 725 850 right 88.411 J25 Door mounted at left 190 725 850 Fastening material 39.160 Fastening material with 4 screws without pre-assembly 39.161 Fastening material (4 screws) including pre-assembly Socket panels Various panels can be fitted to the socket box or to the support console, secured by four screws. Specification: sheet steel. Colour: black NCS S9000- N. 39.006 Panel for 4 sockets 39.007 Panel for 3 sockets and 1 test terminal 39.010 Panel for 3 sockets (Schuko) 39.008 Duy cover, no holes, for installation by customer Supply excludes sockets or test terminals! 82 www.lista.com 01/2007; LISTA 2007
workbench drawer Workbench drawer For neat, orderly storage of hand tools at the workstation. Sheet steel housing for drawer 150EA can be mounted under the workbench with screws and anchor caps. With cylinder lock. Specification: sheet steel. Colour: housing and drawer fronts according to colour chart. Type 39.252 J12 578 725 204 59.027 J12 * * Including fastening material without pre-assembly Blank labels Blank labels, specially designed for use with the Lista Script labelling software, are available as A4 paper sheets, for use with all popular PC printers. Label size Number of A4 sheets / number of labels 18.784 210 x 22 / 70 x 22 5 sheets = 50 / 150 labels Software on the internet: www.lista.com/script 01/2007; LISTA 2007 www.lista.com 83
vice cabinets The vice cabinet consists of a housing with sliding doors and cylinder lock. The cabinet can be fitted with vice and hinge equipment as required. When not required, the vice can easily be moved into the cabinet under the workbench. Housing Specification: sheet steel. Colour: according to colour chart. Type 40.092 J40 310 725 800 40.094 J42 310 725 850 Fastening material 39.160 Fastening material with 4 screws without pre-assembly 39.161 Fastening material (4 screws) including pre-assembly Ordering examples Vice cabinet complete with housing J40 (height: 800), hinge unit and vice, including assembly. Gressel vice Vice type Jaw width Hinge unit 40.912 Gressel AX 100-1 100 Heuer-Klapp 105-115 40.913 Gressel AX 100-1 100 Heuer-Klapp-Lift 106-115 40.914 Gressel AX 125-1 125 Heuer-Klapp 105-135 40.915 Gressel AX 125-1 125 Heuer-Klapp-Lift 106-135 Heuer vice Vice type Jaw width Hinge unit 40.916 Heuer 100-120 120 Heuer-Klapp 105-115 40.917 Heuer 100-120 120 Heuer-Klapp-Lift 106-115 40.918 Heuer 100-140 140 Heuer-Klapp 105-135 40.919 Heuer 100-140 140 Heuer-Klapp-Lift 106-135 84 www.lista.com 01/2007; LISTA 2007
Hinge units Hinge unit for installation in vice cabinet. Gas springs provide weight counterbalance during lifting and lowering. Heuer-Klapp with safety lock, fixed height, including fastening material. Heuer-Klapp-Lift with safety lock, Type Maching vice 40.096 Heuer-Klapp 105-115Gressel AX 100-1, Heuer 100-120 40.097 Heuer-Klapp 105-135Gressel AX 125-1, Heuer 100-140 40.098 Heuer-Klapp-Lift Gressel AX 100-1, 106-115 Heuer 100-120 40.099 Heuer-Klapp-Lift Gressel AX 125-1, 106-135 Heuer 100-140 * Adapter plate required for Gressel vice. height adjustable lift with 175 adjustment range, adjustment range, 360 rotation, with seal of German Trades Association. Including fastening material. Guarantee hinge units: 2 years. Jaw width * 100, 120 * 125, 140 * 100, 120 * 125, 140 Pre mounted hinge units 40.904 Mounting of vice with hinge unit (Heuer-Klapp or Heuer-Klapp-Lift) in vice cabinet housing Adapter plates Adapter plate for Gressel vice to match hinge units of type «Heuer-Klapp» and «Heuer-Klapp-Lift», including fastening material. 40.100 Adapter plate for Gressel vice AX 100-1 40.101 Adapter plate for Gressel vice AX 125-1 01/2007; LISTA 2007 www.lista.com 85
vices and height-adjustment units Gressel vice Forward opening vice with side construction for vertical gripping of round workpieces up to 4 inches diameter. For tubes of up to 6 inches diameter, horizontal grips at two levels with integrated cast iron or Prisma jaws. Specification: cast iron with two ribbed jaws, including fastening material. Colour: turquoise blue RAL 5018. Max. opening Jaw width 39.983 Gressel AX 100-1 110 100 39.984 Gressel AX 125-1 135 125 39.985 Gressel AX 160-1 170 160 Gressel height-adjustment units Lift 130-AX 100 for manual height adjustment (max. 200), 360 rotation. Specification: spheroidal cast iron, including fastening material. Positioning unit 150-AX with gas-filled compression damper, smooth height adjustment (max. 200), 360 rotation. Specification: Spheroidal cast iron, including fastening material. Both, colour: turquoise blue RAL 5018. Type Maching vice 39.986 130-AX 100 AX 100-1 (39.983) 39.987 150-AX 125 AX 125-1 (39.984) 39.988 150-AX 160 AX 160-1 (39.985) Vice base Specification: Multiplex 250x250 x50 predrilled, including fastening material. Maching vice 39.290 Gressel AX 100-1 39.291 Gressel AX 125-1 39.292 Gressel AX 160-1 39.293 Heuer 100-120 Maching vice 39.294 Heuer 100-140 39.295 Gressel Lift 130 39.296 Gressel Lift 150 39.297 Heuer Lift 104 Heuer vice Forward opening vice for vertical gripping of round material, centrally adjustable guides, forged tube jaws and strong anvil, as well as fixed jaws. Double Prisma guide prevents dirt and damage. Specification: dropforged steel, surface-hardened jaws (fixed), including fastening material. Colour: blue haer-tone. Guarantee: 2 years. Type Max. opening Jaw width 40.102 100-120 150 120 40.103 100-140 200 140 86 www.lista.com 01/2007; LISTA 2007
Heuer adjustable-height system Heuer-Lift with gas-filled compression damper, free height adjustment (max. 200), 360 rotation. Specification: drop-forged steel, including fastening material. Colour: blue haer-tone. Guarantee: 2 years. Type Maching vice 40.910 Heuer-Lift 104-115 100-120 (40.102) 40.911 Heuer-Lift 104-135 100-140 (40.103) Pre mounted vice 39.247 Pre-assembly (holes), excluding fastening material 01/2007; LISTA 2007 www.lista.com 87
storage shelves Steam-treated beech veneer, waterproof glued multilayer (DIN 68 705), bevelled edges, surface planed and oiled. Top resistant to spray water and dirt and largely resistant to oil and grease. Between workbench leg assemblies Specification: multiplex board, pre-drilled, including fastening material. Nominal depth 610 For workbench length Thickness 40.090 1250 1170 610 20 39.220 1500 1420 610 20 39.221 1750 1670 610 20 39.222 2000 1920 610 20 39.223 2500 2420 610 20 39.224 3000 * 2920 (2 x 1460) 610 20 39.236 ** 2420 max. 610 20 per lm * Butt-jointed (2-pieces) ** Variabel Between workbench leg assembly and cabinet 27x36E Specification: multiplex board, pre-drilled, including fastening material, without mounting bracket. Nominal depth 610 For workbench length Thickness 40.091 1250 585 610 20 39.230 1500 835 610 20 39.231 1750 1085 610 20 39.232 2000 1335 610 20 39.233 2500 1835 610 20 39.234 3000 2335 610 20 39.236 ** 2420 max. 610 20 per lm ** Variabel Mounting bracket 39.238 Support bracket of sheet steel. Colour: light grey RAL 7035, including fastening material, for nominal depht 610 Foot rest Covered with ribbed PVC mat. Can be used under all workstations. Specification: sheet steel. Colour: light grey RAL7035. Ribbed mat, black. 39.240 500 250 140 88 www.lista.com 01/2007; LISTA 2007
27x36e drawer cabinets Cabinet housing Type Clear height 13.780 B309 200 564 725 283 13.781 B310 300 564 725 383 13.782 B311 450 564 725 533 18.501 B308 550 564 725 650 13.783 B312 600 564 725 700 13.784 B315 700 564 725 800 13.785 B314 750 564 725 850 13.786 B313 * 900 564 725 1000 * unperforated cover 39.160 Fastening material with 4 screws without pre-assembly 39.161 Fastening material (4 screws) including pre-assembly For electronic locking systems and access control see seperate chapter. Drawers Standard model Front height Useful height Side / back height Carrying capacity kg 13.793 50 EA 36 33 60 13.794 75 EA 61 52 80 18.583 75 VA 54 52 200 13.795 100 EA 86 77 100 18.584 100 VA 79 77 200 13.796 125 EA 111 77 100 18.585 125 VA 104 77 200 13.797 150 EA 136 127 100 18.586 150 VA 129 127 200 13.798 200 EA 186 177 100 18.587 200 VA 179 177 200 13.799 250 EA 236 227 100 18.588 250 VA 229 227 200 13.800 300 EA 286 277 100 18.589 300 VA 279 277 200 EA;VA With safety catch on right Front height Useful height Side / back height Carrying capacity kg 13.808 50 EA 36 33 60 13.809 75 EA 61 52 80 18.591 75 VA 54 52 200 13.810 100 EA 86 77 100 18.592 100 VA 79 77 200 13.811 125 EA 111 77 100 18.593 125 VA 104 77 200 13.812 150 EA 136 127 100 18.594 150 VA 129 127 200 13.813 200 EA 186 177 100 18.595 200 VA 179 177 200 13.814 250 EA 236 227 100 18.596 250 VA 229 227 200 13.815 300 EA 286 277 100 18.597 300 VA 279 277 200 Useful width of drawers 459 = 27 units of 17 Useful depth of drawers 612 = 36 units of 17 EA = Normal extension: 85-90% extension possible, max. Carrying capacity with evenly distributed load VA = Total extension: 100% extension possible, the load-bearing capacity per drawer is max. 200kg. The operating manual must be observed for the loading and burden on drawers and drawer cabinets The front heights of all the drawers together should not exceed usable cabinet height. 01/2007; LISTA 2007 www.lista.com 89
Drawer safety catch on right 13.902 For conversion: drawer safety catch on right Blank labels Blank labels, specially designed for use with the Lista Script labelling software, are available as A4 paper sheets, for use with all popular PC printers. Label size Number of A4 sheets / number of labels 18.784 210 x 22 / 70 x 22 5 sheets = 50 / 150 labels Software on the internet: www.lista.com/script Pull-out shelf Installation height Useful width Useful depth Carrying capacity kg 13.817 100 EA 434 612 70 EA = Normal extension: 85-90% extension possible Adjustable shelf Installation height Useful width Useful depth Carrying capacity kg 13.816 75 498 618 70 Hinged doors Hinged at right Front height Specification 13.787 450 With cylinder lock * 13.788 450 With bolt lock 13.789 600 With cylinder lock * 13.790 600 With bolt lock Hinged at left Front height Specification 13.791 450 With cylinder lock * 13.792 600 With cylinder lock * * Standard model is fitted with a central coon lock system Retainer top, raised edges on 3 sides 13.880 With ribbed mat 564 725 20 13.898 Ribbed mat separate 559 720 3 Housing base 13.878 Base 564 693 50 14.713 Base 564 693 100 90 www.lista.com 01/2007; LISTA 2007
27x36e sets of drawer partition material All sets without inscription material! Lista-Script see drawer partition material! Useful drawer dimension: width: 27E = 459, depth: 36E = 612 (Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height 100.283 50 12 trough-shaped parts: 4 grooves 50 trough dividers: 4 grooves For front height 100.284 50 4 trough-shaped parts: 4 grooves 20 trough dividers: 4 grooves 8 trough-shaped parts: 3 grooves 10 trough dividers: 3 grooves For front height 100.286 50 4 trough-shaped parts: 3 grooves 20 trough dividers: 3 grooves 8 trough-shaped parts: 2 grooves 10 trough dividers: 2 grooves (Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height 100.311 50 1 corrugated insert 1 plain partition: F50, 27E 20 holding pins: 27 1 allen key insert For front height 100.295 50 1 corrugated insert 1 plain partition: F50, 27E For front height 100.303 75 1 pair of angled supports 2 plain partitions: F75, 27E For front height 100.296 100, 125 - A 100.297 150 - B 20 holding pins: A = 27, B = 52 2 plain partitions: 36E 1 sliding tray For front height 100.299 50 2 slotted partitions: F50, 36E 4 pairs of grooved inserts: 11 grooves 4 pairs of grooved inserts: 8 grooves 4 pairs of grooved inserts: 6 grooves 24 dividers: F50, 9E (Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height 100.292 50 100.293 75 100.294 100, 125 12 plastic boxes: 150 x 75 6 plastic boxes: 150 x 150 01/2007; LISTA 2007 www.lista.com 91
(Picture corresponds to 27x36E. 36x27E requires a different assembly.) For front height 100.290 50 100.291 75 16 plastic boxes: 75 x 75 8 plastic boxes: 150 x 75 4 plastic boxes: 150 x 150 For front height 100.288 50 16 plastic boxes with centre divider: 75 x 75 16 plastic boxes: 75 x 75 4 plastic boxes: 150 x 75 2 plastic boxes: 150 x 150 For front height 100.270 75 100.271 100, 125 100.272 150 100.273 200 80.691 250 1 slotted partition: 36E 1 divider: 12E 1 divider: 15E For front height 100.275 75 100.276 100, 125 100.277 150 100.278 200 80.692 250 2 slotted partitions: 36E 3 dividers: 9E For front height 100.244 50 100.245 75 100.246 100, 125 100.247 150 2 slotted partitions: 36E 10 dividers: 9E For front height 100.249 50 100.250 75 100.251 100, 125 100.252 150 3 slotted partitions: 36E 6 dividers: 6E 2 dividers: 9E For front height 100.234 50 100.235 75 100.236 100, 125 4 slotted partitions: 36E 15 dividers: 5E 10 dividers: 6E For front height 100.254 50 100.255 75 100.256 100, 125 100.257 150 2 slotted partitions: 27E 4 dividers: 6E 3 plain partitions: 24E For front height 100.265 75 100.266 100, 125 100.267 150 100.268 200 80.695 250 2 plain partitions: 36E 92 www.lista.com 01/2007; LISTA 2007
workbench superstructures ordering examples Note: These ordering examples only consist of the superstructure. The workbench must be ordered separately; refer to workbench ordering examples and individual components for workbench tops and workbench bases. Assembly workstation Workstation with perforated plate rear panel for use in heavy industry and machine shops. The necessary tools and materials must always be within easy reach for an efficient working procedure. Further accessories under individual components for workbench superstructures. Example 1, for workbench 1500 40.902 Support pillar 700 90.317 Perforated rear panel 1000 39.283 Keyhole hooks, set 2 Needed components: 2 support pillars 2 rear panels 1 set with 18 holders Example 2, for workbench 1750 and 2000 40.902 Support pillar 700 90.316 Perforated rear panel 750 39.284 Keyhole hooks, set 3 Needed components: 3 support pillars 4 rear panels 1 set with 28 holders 01/2007; LISTA 2007 www.lista.com 93
Example 3, for workbench 2000 40.902 Support pillar 700 90.317 Perforated rear panel 1000 90.316 Perforated rear panel 750 39.284 Keyhole hooks, set 3 Needed components 3 support pillars 2 rear panels, 90.317 2 rear panels, 90.316 1 set with 28 holders Measuring and testing workstation Electronic workstation for workshops and laboratories with ideal storage possibilities for measuring and testing activities. Further accessories under individual components for workbench superstructures. Example 1, for workstation 1500 40.901 Support pillar 350 39.361 Plain rear panel 1000 39.365 Adjustable shelf 1000 Needed components: 2 support pillars 1 rear panel 1 adjustable shelf Example 2, for workbench 1750 and 2000 40.901 Support pillar 350 39.356 Plain rear panel 750 39.363 Adjustable shelf 750 Needed components: 3 support pillars 2 rear panels 2 adjustable shelves Example 3, for workbench 2000 40.901 Support pillar 350 39.361 Plain rear panel 1000 39.356 Plain rear panel 750 39.365 Adjustable shelf 1000 39.363 Adjustable shelf 750 Needed components: 3 support pillars 1 rear panel, 39.361 1 rear panel, 39.356 1 adjustable shelf, 39.365 1 adjustable shelf, 39.363 94 www.lista.com 01/2007; LISTA 2007
Repair and service workstation Workstation for versatile use in industrial businesses and workshops. The ergonomic arrangement of the individual elements optimises progress of work. Equipment rail incl. brackets to receive spring motion and lighting. Further accessories under individual components for workbench superstructures. Example 1, for workbench 1500 40.903 Support pillar 1400 90.317 Perforated rear panel 1000 39.365 Adjustable shelf 1000 39.441 Container strip 1000 80.733 Red storage bins, size 3 80.730 Blue storage bins, size 4 39.396 Tool rail incl. support arms 39.283 Keyhole hooks, set 2 Needed components: 2 support pillars 1 rear panel 1 adjustable shelf 2 container strips 9 storage containers, 80.733 6 storage containers, 80.730 1 tool rail incl. support arms 1 set with 18 holders Example 2, for workbench 1750 and 2000 40.903 Support pillar 1400 90.316 Perforated rear panel 750 39.363 Adjustable shelf 750 39.440 Container strip 750 80.733 Red storage bins, size 3 80.730 Blue storage bins, size 4 39.442 Tool rail incl. support arms 39.284 Keyhole hooks, set 3 Needed components: 3 support pillars 4 rear panels 2 adjustable shelves 2 container strips 7 storage containers, 80.733 5 storage containers, 80.730 1 tool rail incl. support arms 1 set with 28 holders 01/2007; LISTA 2007 www.lista.com 95
Example 3, for workbench 2000 40.903 Support pillar 1400 90.316 Perforated rear panel 750 39.365 Adjustable shelf 1000 39.441 Container strip 1000 80.733 Red storage bins, size 3 80.730 Blue storage bins, size 4 39.443 Tool rail incl. support arms 39.284 Keyhole hooks, set 3 Needed components: 3 support pillars 4 rear panels 2 adjustable shelves 2 container strips 9 storage containers, 80.733 6 storage containers, 80.730 1 tool rail incl. support arms 1 set with 28 holders 96 www.lista.com 01/2007; LISTA 2007
support pillars Support pillars on bench tops Support pillars available in three heights and bolted (on site) directly to workbench top using fastening materials supplied. Specification: steel profile, holes at front and rear at 50 increments for mounting components, including fastening material. Colour: according to colour chart. Column height from workbench top Carrying capacity kg Nominal height 40.901 390 350 100 40.902 740 700 100 40.903 1440 1400 100 Minimum top thickness 40 Minimum top length required A = N o of axis dimensions B(750/1000) + 90 Support pillars on worchbench leg Supports available in three heights. s 350 and 700 require one stabilising profile. Two stabilising profiles are required for 1400 height above worktop. Specification: steel, holes at front and rear in 50 spacing for simple insertion of modular add-on elements. With back-to-back workstations, the same supports act on both sides. Fixing materials included. Colour: according to colour chart. Column height from from workbench top Required stabilising profiles 39.255 350 1 39.256 700 1 39.257 1400 2 Stabilising profiles for basic units 88.392 1530 88.393 1780 88.394 2030 88.395 2530 88.396 3030 for add-on units 88.397 1500 88.398 1750 88.399 2000 88.400 2500 88.401 3000 88.442 Pre assembly per stabilising profile 01/2007; LISTA 2007 www.lista.com 97
rear panels Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. If no power conduit is fitted, fill-in profiles are used to close the remaining gap. Specification: sheet steel. Colour: according to colour chart. Plain rear panels Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Specification: sheet steel. Colour: light grey, RAL 7035. 39.411 750 100 39.356 750 350 39.415 1000 100 39.361 1000 350 Rear panels perforated Supports can be fitted with partial or full rear panels. All panels can be fitted into supports without screws. Perforated with round holes Ø 3.6 (for M4 x 10 Taptite self-cutting screws), spacing 19 or square holes 10 x 10, spacing 38. Specification: sheet steel. Colour: light grey, RAL 7035. 90.316 750 350 90.317 1000 350 Keyhole hooks for square holes To fit rear panels with square holes. Specification: sheet steel. Colour: alu grey. Keyhole hook sets Sets 1 and 2 suitable for minimal tool set, sets 3 and 4 suitable for normal tool sets. 1, 2 Set Quantity 39.282 1 12 39.283 2 18 39.284 3 28 39.285 4 40 3, 4 Tool holder with inclined hook end Diameter 39.397 50 6 39.398 100 6 39.399 150 6 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. 98 www.lista.com 01/2007; LISTA 2007
Inclined hook for lock nut and socket key 39.149 14 / 40 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool holder with vertical hook end Diameter 39.814 35 6 39.288 75 6 39.815 125 6 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool clamp Diameter 39.303 6 39.286 10 39.287 13 39.304 16 39.305 19 Double tool holder with vertical hook end Diameter 39.299 35 35 6 39.300 50 35 6 39.301 75 35 6 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Tool clamp with large base plate Diameter 39.306 25 39.307 28 39.308 32 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Base plate, do-it-yourself mounting / assembly 39.144 Small 39.145 Large Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Magnetic holder Diameter 39.498 40 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. 01/2007; LISTA 2007 www.lista.com 99
Holder for storage bin (single compartments) 39.660 For size 2 and 3 Pipe holder, also suitable for cable, etc. Diameter 39.508 35 60 39.509 35 100 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Pliers / Pincer holder 39.314 35 20 39.315 55 20 39.316 75 20 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Saw holder (used in pairs) 39.661 For 4 saws Price indication per item. The minimum ordering quantity per article is 2 items. Further ordering quantities are only possible in increments of 2 items. Machine holder Diameter 39.317 40 39.318 60 39.319 80 Cable holder 39.490 150 37 50 39.491 200 37 50 Price indication per item. The minimum ordering quantity per article is 5 items. Further ordering quantities are only possible in increments of 5 items. Screwdriver holder 39.544 For 6 parts 39.545 For 12 parts Holder for storage bin (five compartments) 39.796 550 60 For size 2 and 3 39.797 550 38 For size 2 and 3 100 www.lista.com 01/2007; LISTA 2007
Hexagonal socket holder, diameter 1-11 39.662 200 6 Vertical wrench holder 39.695 For 8 wrenches Drill holder / Hexagonal socket holder 39.598 For 14 parts 39.599 For 28 parts Nut retention recess 39.694 390 30 12 holes Vertical wrench holder, for 10 wrenches 39.674 145 / 75 50 220 39.675 225 / 125 50 225 Combination switch, 2-part 39.734 150 55 Roll retainer holder 39.632 355 100 120 Tool holder for round sockets Diameter 39.736 100 70 Single 39.629 300 70 Triple 01/2007; LISTA 2007 www.lista.com 101
Shelf 39.697 350 125 Tool adapter for do-it-yourself drilling Top 39.733 390 45 Plastic Steel shelf / Shelf 39.631 435 250 Forms rack for DIN A4 Colour 39.633 220 310 light-grey 102 www.lista.com 01/2007; LISTA 2007
adjustable shelves Adjustable shelves, plain, with raised edge Shelves are fitted with one longitudinal raised edge. Adjustable shelves can be fitted with raised edge either to front or rear. The shelves are fitted with two brackets into supports, either horizontally or at an angle of 15. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 39.363 750 300 750 295 39.364 750 350 750 345 39.365 1000 300 1000 295 39.366 1000 350 1000 345 Including two brackets each. Max. load: 25kg Shelf height: 25 + 17 strip Dividers For partitioning of the slotted shelves. Specification: sheet steel. Colour: light grey RAL7035. Dividers For shelf depths 100.447 300 95 100.448 300 145 100.449 300 195 100.452 350 95 100.453 350 145 100.454 350 195 The spacing between the shelves is at least 25 more than the height of the separators. Slotted shelves with raised edge Slotted shelves are fitted with raised edge along the rear. Slot spacing 15 for partitioning using dividers. The adjustable shelves are fitted with two brackets horizontally into the supports. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 39.385 750 300 700 295 39.387 750 350 700 345 39.388 1000 300 1000 295 39.389 1000 350 1000 345 Including two brackets each. Max. load: 25kg Shelf height: 25 + 17 strip Ribbed shelf mat Non-slip ribbed rubber mat for shelves. Colour: grey. Suitable for Adjustable shelf, with and without raised sides Nominal width Nominal depth Useful width Useful depth Material 42.773 750 300 747 293 Rubber 42.774 750 350 747 343 Rubber 42.775 1000 300 997 293 Rubber 42.776 1000 350 997 343 Rubber Small light resistance 01/2007; LISTA 2007 www.lista.com 103
container strips Container strips For containers of size 2, 3 and 4, inserts into supports, no fixing screws required. Specification: sheet steel. Colour: light grey RAL7035. For container size Quantity of containers 39.440 750 85 2, 3, 4 7-14, 7, 5 39.441 1000 85 2, 3, 4 9-18, 9, 6 104 www.lista.com 01/2007; LISTA 2007
storage containers, width and height refer to the external dimensions. The storage containers are breakproof, resistant to most acids and alkalis, temperature resistance -40 to +80 C. Specification: polyethylene (PE). Colours: red, blue, green, yellow. Size 2 Colour Capacity dm 3 80.737 Red 103 93 52 0.26 80.728 Blue 103 93 52 0.26 80.738 Green 103 93 52 0.26 80.768 Yellow 103 93 52 0.26 Size 3 Colour Capacity dm 3 80.733 Red 103 168 76 0.90 80.729 Blue 103 168 76 0.90 80.724 Green 103 168 76 0.90 80.702 Yellow 103 168 76 0.90 Size 4 Colour Capacity dm 3 80.734 Red 149 233 121 2.70 80.730 Blue 149 233 121 2.70 80.725 Green 149 233 121 2.70 80.721 Yellow 149 233 121 2.70 Accessories For size 2 Number 80.740 Transparent foil 73 11 10 80.739 Labelling strips 73 11 10 For size 3 Number 80.742 Transparent foil 75 20 10 80.741 Labelling strips 75 20 10 For size 4 / 5 / 6 Number 88.106 Transparent foil 100 35 10 88.105 Labelling strips 100 35 10 01/2007; LISTA 2007 www.lista.com 105
Tool rails Horizontal support arms are inserted into the vertical supports. No securing screws required. They support the rail, which is fitted with a ball-bearing runner. The rail can be positioned at any workstation depth. Specification: steel, support arms and rail galvanised. Basic units Consisting of two support arms, and rail with runner. Equipment rails 39.396 1030 600 15 39.442 1530 600 15 39.443 1780 600 15 39.444 2030 600 15 Carrying capacity kg Additional runner 39.475 Additional runner, carrying capacity 2.5kg Additional tool rails For basic rail units. With mountings. Without runner. Equipment rails 39.487 1030 39.488 1530 39.489 1780 39.496 2030 Pivoting tool rail (180 ) Pivoting through 180, fitted with ball-bearing runner, installed in the support. No securing screws required. Specification: steel, galvanised. Equipment rails Carrying capacity kg 39.474 800 10 106 www.lista.com 01/2007; LISTA 2007
Lamp attachment rail Fits between tool rail support arms. Consists of lamp rail and fixing kit without horizontal support arms. Specification: steel. Colour: light-grey RAL7035. Useful width Rail length 88.466 750 720 150 Main unit 88.467 1000 970 150 Main unit 88.468 1500 1470 150 Main unit 88.469 1750 1720 150 Main unit 88.470 2000 1970 150 Main unit Horizontal support arm Fitted to the vertical supports. No fixing screws required. Specification: steel, galvanised. 90.318 600 01/2007; LISTA 2007 www.lista.com 107
power conduits and accessories power conduits Power conduits either fit into the support pillars without screws, or screw to the bench top (holes are not pre-drilled). Power conduits are supplied with a choice of sockets: Type 13 (CH version), Schuko, France (Type F) or England (Type GB). All socket types are for 230V. Available with fault-current protective switches (personal protection switches). Each power conduit is supplied with a 3 metre connection cable. Specification: sheet steel, painted / IP-20. Colour: light grey RAL 7035. Guarantee power conduits: 2 years. With safety swtich Type CH Fittings Type 40.268 750 Sockets 4 x 230V, with on / off switch CH 39.874 1000 Sockets 4 x 230V, with on / off switch CH 40.276 1500 Sockets 6 x 230V, with on / off switch CH 40.284 2000 Sockets 6 x 230V, with on / off switch CH Type Schuko Fittings Type 40.269 750 Sockets 4 x 230V, with on / off switch Schuko 39.875 1000 Sockets 4 x 230V, with on / off switch Schuko 40.277 1500 Sockets 6 x 230V, with on / off switch Schuko 40.285 2000 Sockets 6 x 230V, with on / off switch Schuko Type F Fittings Type 40.270 750 Sockets 4 x 230V, with on / off switch F 39.960 1000 Sockets 4 x 230V, with on / off switch F 40.278 1500 Sockets 6 x 230V, with on / off switch F 40.286 2000 Sockets 6 x 230V, with on / off switch F Type GB Fittings Type 40.271 750 Sockets 4 x 230V, with on / off switch GB 39.958 1000 Sockets 4 x 230V, with on / off switch GB 40.279 1500 Sockets 6 x 230V, with on / off switch GB 40.287 2000 Sockets 6 x 230V, with on / off switch GB Attention: The power conduits connected over the jumper cable are not protected by the safety switch. It is possible on customer's request (note this on the supplier order). 108 www.lista.com 01/2007; LISTA 2007
accessories Cable Picture Type 63.134 Power cable 3000 1 CH 63.135 Jumper cable 500 2 CH/Schuko/F/GB 63.136 Power cable 3000 1 Schuko 63.598 Power cable 3000 1 GB 63.599 Power cable 3000 1 F 1 2 Socket box For electrical power to the workstation. Holes for power supply are equipped with plastic plugs. Open front, fitted with the appropriate socket panel. Specification: sheet steel. Colour: light grey RAL7035. 39.011 290 100 100 Socket panels Various panels can be fitted to the socket box or to the support console, secured by four screws. Specification: sheet steel. Colour: black NCS S9000- N. 39.006 Panel for 4 sockets 39.007 Panel for 3 sockets and 1 test terminal 39.010 Panel for 3 sockets (Schuko) 39.008 Duy cover, no holes, for installation by customer Supply excludes sockets or test terminals! Socket block Specification: Polyamide casing with 5 sockets and on/off switch. Incl. fixing material, with 3 m connecting cable. Mountable in horizontal wall cable conduit. Type 88.598 400 CH 60 40 88.599 400 Schuko 60 40 63.602 400 F 60 40 63.601 400 GB 60 40 01/2007; LISTA 2007 www.lista.com 109
hexagonal workbench accessories Accessories and energy conduits available on request. Multi-user workstations with large, hexagonal workbench top. Every work position includes a drawer cabinet substructure. Energy points are grouped in the central area. Specification on request. Workbench tops In two parts. Top type Top thickness Edge lenght Top lenght Top depth 40.178 Multiplex 40 1250 2500 2165 40.179 Multiplex 50 1250 2500 2165 39.160 Fastening material with 4 screws without pre-assembly 39.161 Fastening material (4 screws) including pre-assembly Accessories and energy conduits available on request. Cabinet box for socket box Multiplex, 20 thickness. 40.258 Cabinet tops, hexagonal Socket box Unwired, empty box. Corner dimension 958, edge length 6 x 450, 300 tall. Made of painted sheet steel. Colour: red RAL 3000. Fixing material included. 40.259 Socket box, hexagonal Equipment options for socket boxes Equipment options for socket boxes, hexagonal, fully wired, without socket box. Per workstation. Socket 230V, 16A Socket 380V, 16A red Type 40.260 CH 6 40.261 CH 6 1 1 40.262 Schuko 6 40.263 Schuko 6 1 1 Electrical connections must only be made by a trained electrician. Other configurations and accessories on request. Compressed air connectors 16bar 110 www.lista.com 01/2007; LISTA 2007
01/2007; LISTA 2007 www.lista.com 111
OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material 112 www.lista.com 01/2007; LISTA 2007
Table of content Modular workbenches Introduction 114 Ordering examples 116 Component parts 129 Partition material 139 Superstructures 140 01/2007; LISTA 2007 www.lista.com 113
MODULAR WORKBENCHES Lista modular workbenches are hard-wearing, modern workplaces for workshops, production and the hobby sector in tried and trusted Lista quality Lista modular workbenches offer High stability by force-fitted pressed and screwed assemblies Stationary or mobile executions on castors or with a pallet base High housing carrying capacities up to 1000 kg Individual equipment possibilities with shelves,drawers and doors with 25:25 slotted increments Colour scheme by high-quality powdercoating according to customer wishes Versatile design possibilities with Lista dividing material Top dimensions in many lengths proved in practice of 700, 1250, 1500, 2000, 2500 or according to customer requirements Accessories / special solutions - Locking systems adapted to many customer requirements ranging from individual locking, including coon locking, to locking by master or collecti ve key systems - Drawers with individual locking - Workbench superstructures such as perforated walls, container strip mountings or installation conduits - Workbench tops in conductible execution or with resistance against specific thermal, chemical and mechanical stresses - ESD execution (conductible) THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N 114 www.lista.com 01/2007; LISTA 2007
TOUT LE RAFFINEMENT EST DANS LE DETAIL Plateaux d établis Exécution solide et robuste en plaques de multiplex hêtre de 40 ou 50 d épaisseur ou plaques de hêtre massives de 50 d épaisseur. Livrable, en option avec rail d acier frontal ou avec protection en tôle d acier sur l ensemble de la surface ainsi qu avec des butées sur le côté et à l arrière. Plateaux d établi avec des dimensions spéciales ou d autres exécutions avec résistance aux contraintes chimiques, thermiques, mécaniques ou plateaux antistatiques sur demande. Tiroirs Les tiroirs sont guidés sur roulements à billes. Dimensions utiles 459 de largeur, 510. Livrable en 5 hauteurs différentes. Face avant poignée/étiquette autocollante et la possibilité d inscription avec le système Lista Script. Le verrouillage est effectué par le verrouillage central de l établi. Subdivision des tiroirs avec le matériel de subdivision de Lista. Charge : 70 kg en utilisation stationnaire, 30 kg en utilisation mobile. Livrable également coe exécution spéciale avec fermeture individuelle des tiroir (voir photo). Portes battantes Porte en tôle d acier avec poignée encastrée plastique. Livrable en 2 hauteurs (450 ou 600 ). En option montage à droite ou à gauche. Le verrouillage est effectué par le verrouillage central de l établi. Derrière lesportes, desrayons galvanisés d une capacité de charge de 50 kg. Etablis mobiles pour le transport par transpalette Pour l utilisation mobile avec chariot élévateur. Avec socle de chariot élévateur en tube carré soudé vissé en dessous. Livrable pour établis modulaires à une ou deux parties. Capacité de charge du socle de chariot élévateur 1000 kg. Roues Pour l utilisation mobile sur roues. Exécution standard avec deux roues fixes et deux roues pivotantes respectivement. Roues pivotantes avec blocage total. Avec bande d usure en caoutchouc plein. Livrable pour établis modulaires àune ou deux parties. Capacité de charge par roue 100 kg. D autres exécutions sur demande. Poignée coulissante Pour établi roulant. Ergonomique et stable. En tube d acier avec gaine en plastique. Longueur utile environ 400. 01/2007; LISTA 2007 www.lista.com 115
ordering examples ordering examples standard stationary Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. 700 width Top type Thickness 41.420 700 840 Multiplex 40 41.421 700 850 Multiplex 50 41.480 700 800 Without top Drawers: 150 ; 450 ; shelf 700 width Top type Thickness 41.422 700 840 Multiplex 40 41.423 700 850 Multiplex 50 41.481 700 800 Without top Drawers: 100 ; 200 ; 300 700 width Top type Thickness 41.723 700 840 Multiplex 40 41.758 700 850 Multiplex 50 41.759 700 800 Without top Drawers: 600 ; 2 shelves 700 width Top type Thickness 41.724 700 840 Multiplex 40 41.760 700 850 Multiplex 50 41.761 700 800 Without top Drawers: 4 x 150 116 www.lista.com 01/2007; LISTA 2007
700 width Top type Thickness 41.731 700 840 Multiplex 40 41.733 700 850 Multiplex 50 41.735 700 800 Without top Drawers: 150 ; 450 ; shelf 700 width Top type Thickness 41.732 700 840 Multiplex 40 41.734 700 850 Multiplex 50 41.736 700 800 Without top Drawers: 2 x 75 ; 3 x 150 1250 / 1500 width Top type Thickness 41.424 1250 700 840 Multiplex 40 41.425 1250 700 850 Multiplex 50 41.426 1500 700 840 Multiplex 40 41.427 1500 700 850 Multiplex 50 41.482 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 shelves 1250 / 1500 width Top type Thickness 41.428 1250 700 840 Multiplex 40 41.429 1250 700 850 Multiplex 50 41.430 1500 700 840 Multiplex 40 41.431 1500 700 850 Multiplex 50 41.483 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf 1250 / 1500 width Top type Thickness 41.432 1250 700 840 Multiplex 40 41.433 1250 700 850 Multiplex 50 41.434 1500 700 840 Multiplex 40 41.435 1500 700 850 Multiplex 50 41.484 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 x 75 ; 450 ; shelf 01/2007; LISTA 2007 www.lista.com 117
1250 / 1500 width Top type Thickness 41.436 1250 700 840 Multiplex 40 41.437 1250 700 850 Multiplex 50 41.438 1500 700 840 Multiplex 40 41.439 1500 700 850 Multiplex 50 41.485 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 100 ; 2 x 150 ; 200 1250 / 1500 width Top type Thickness 41.440 1250 700 840 Multiplex 40 41.441 1250 700 850 Multiplex 50 41.442 1500 700 840 Multiplex 40 41.443 1500 700 850 Multiplex 50 41.486 700 800 Without top Drawers on the left side: 100 ; 200 ; 300 Drawers on the right side: 100 ; 200 ; 300 1250 / 1500 width Top type Thickness 41.444 1250 700 840 Multiplex 40 41.445 1250 700 850 Multiplex 50 41.446 1500 700 840 Multiplex 40 41.447 1500 700 850 Multiplex 50 41.487 700 800 Without top Drawers on the left side: 2 x 75 ; 3 x 150 Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness 41.448 700 840 Multiplex 40 41.449 700 850 Multiplex 50 41.488 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the Center: 2 shelves Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness 41.450 700 840 Multiplex 40 41.451 700 850 Multiplex 50 41.489 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 2 x 75 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf 118 www.lista.com 01/2007; LISTA 2007
2000 width Top type Thickness 41.452 700 840 Multiplex 40 41.453 700 850 Multiplex 50 41.490 700 800 Without top Drawers on the left side: 600 ; 2 shelves Drawers in the center: 4 x 75 ; 100 ; 200 Drawers on the right side: 600 ; 2 shelves 2000 width Top type Thickness 41.454 700 840 Multiplex 40 41.455 700 850 Multiplex 50 41.491 700 800 Without top Drawers on the left side: 2 x 100 ; 2 x 200 Drawers in the center: 2 shelves Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness 41.456 700 840 Multiplex 40 41.457 700 850 Multiplex 50 41.492 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 100 ; 200 ; 300 Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness 41.458 700 840 Multiplex 40 41.459 700 850 Multiplex 50 41.493 700 800 Without top Drawers on the left side: 4 x 75 ; 100 ; 200 Drawers in the center: 2 shelves Drawers on the right side: 2 x 75 ; 450 ; shelf 2000 width Top type Thickness 41.720 700 840 Multiplex 40 41.719 700 850 Multiplex 50 41.718 700 800 Without top Drawers on the left side: 100 ; 100 ; 150 ; 150 Drawers in the center: shelf; shelf Drawers on the right side: 150 ; 450 ; shelf 01/2007; LISTA 2007 www.lista.com 119
2000 width Top type Thickness 41.721 700 840 Multiplex 40 41.906 700 850 Multiplex 50 41.907 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 4 x 150 Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness 41.722 700 840 Multiplex 40 41.908 700 850 Multiplex 50 41.909 700 800 Without top Drawers on the left side: 3 x 200 Drawers in the center: 2 shelves Drawers on the right side: 600 ; 2 shelves 2500 width Top type Thickness 41.464 700 840 Multiplex 40 41.465 700 850 Multiplex 50 41.494 700 800 Without top Drawers on the left side: 600 ; 2 shelves Drawers in the center: 3 x 100 ; 2 x 150 Drawers on the right side: 600 ; 2 shelvesdrawers in the center: 3 x 100 ; 2 x 150 2500 width Top type Thickness 41.466 700 840 Multiplex 40 41.467 700 850 Multiplex 50 41.495 700 800 Without top Drawer on the left side: 2 x 75 ; 450 ; shelf Drawer in the center: 2 x 75 ; 100 ; 150 ; 200 Drawer on the right side: 2 x 75 ; 450 ; shelf Drawer in the center: 2 x 75 ; 100 ; 150 ; 200 120 www.lista.com 01/2007; LISTA 2007
ordering examples standard stationary with set-back bottoms Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Shelves offset to rear for better legroom, e.g. when working seated. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized. 1250 width Top type Thickness 41.807 700 840 Multiplex 40 41.808 700 850 Multiplex 50 41.809 700 800 Without top Drawers on the left side: 2 shelves offset to rear Drawers on the right side: 150 ; 450 ; shelf 1500 width Top type Thickness 41.804 700 840 Multiplex 40 41.805 700 850 Multiplex 50 41.806 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 shelves offset to rear 2000 width Top type Thickness 41.801 700 840 Multiplex 40 41.802 700 850 Multiplex 50 41.803 700 800 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers in the center: 2 shelves offset to rear Drawers on the right side: 150 ; 450 ; shelf 01/2007; LISTA 2007 www.lista.com 121
ordering examples standard as workshop desks Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Without base in central area for better legroom, e.g. when working seated. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized. 2000 width Top type Thickness 41.460 700 840 Multiplex 40 41.461 700 850 Multiplex 50 Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf 2000 width Top type Thickness 41.462 700 840 Multiplex 40 41.463 700 850 Multiplex 50 Drawers on the left side: 100 ; 200 ; 300 Drawers on the right side: 100 ; 200 ; 300 122 www.lista.com 01/2007; LISTA 2007
ordering examples standard mobile with pallet Truck base Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Without base in central area for better legroom, e.g. when working seated. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized. 700 width Top type Thickness 41.416 700 877 Multiplex 40 41.417 700 887 Multiplex 50 Drive in width at front / side: 498 / 550 Drawers: 2 x 75 ; 3 x 150 1250 width Top type Thickness 41.412 700 877 Multiplex 40 41.413 700 887 Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 2 x 75 ; 100 ; 150 ; 200 Drawers on the right side: 600 ; 2 shelves 1250 width Top type Thickness 41.414 700 877 Multiplex 40 41.415 700 887 Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 450 ; 150 ; shelf; shelf Drawers on the right side: shelf; shelf 01/2007; LISTA 2007 www.lista.com 123
ordering examples standard mobile Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 400 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. With front push handles in addition to 2 fixed and 2 swivel castors. Bearing surface in black solid rubber. Wheel diameter: 125. Swivel castors with double stop. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. With drawer catch for mobile use. Carrying capacity: 30 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized. 700 width Top type Thickness 41.500 700 877 Multiplex 40 41.501 700 887 Multiplex 50 41.517 700 837 Without top Drawers: 150 ; 450 ; shelf 700 width Top type Thickness 41.502 700 877 Multiplex 40 41.503 700 887 Multiplex 50 41.516 700 837 Without top Drawers: 100 ; 200 ; 300 700 width Top type Thickness 41.524 700 877 Multiplex 40 41.525 700 887 Multiplex 50 41.526 700 837 Without top Drawers: 2 x 75 ; 3 x 150 1250 width Top type Thickness 41.504 700 877 Multiplex 40 41.505 700 887 Multiplex 50 41.518 700 837 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 shelves 124 www.lista.com 01/2007; LISTA 2007
1250 width Top type Thickness 41.506 700 877 Multiplex 40 41.507 700 887 Multiplex 50 41.519 700 837 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 150 ; 450 ; shelf 1250 width Top type Thickness 41.508 700 877 Multiplex 40 41.509 700 887 Multiplex 50 41.520 700 837 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 2 x 75 ; 450 ; shelf 1250 width Top type Thickness 41.510 700 877 Multiplex 40 41.511 700 887 Multiplex 50 41.521 700 837 Without top Drawers on the left side: 150 ; 450 ; shelf Drawers on the right side: 100 ; 2 x 150 ; 200 1250 width Top type Thickness 41.512 700 877 Multiplex 40 41.513 700 887 Multiplex 50 41.522 700 837 Without top Drawers on the left side: 100 ; 200 ; 300 Drawers on the right side: 100 ; 200 ; 300 1250 width Top type Thickness 41.514 700 877 Multiplex 40 41.515 700 887 Multiplex 50 41.523 700 837 Without top Drawers on the left side: 2 x 75 ; 3 x 150 Drawers on the right side: 150 ; 450 ; shelf 01/2007; LISTA 2007 www.lista.com 125
1250 width Top type Thickness 41.769 700 877 Multiplex 40 41.770 700 887 Multiplex 50 41.868 700 837 Without top Drawers on the left side: 2 x 75 ; 100 ; 150 ; 200 Drawers on the right side: 600 ; 2 shelves 126 www.lista.com 01/2007; LISTA 2007
ordering examples plus PLUS system workbenches differ from the STAND- ARD execution in the following details: The side walls of the PLUS workbench base are equipped at the factory with fixed integrated nuts. These allow (also subsequent) add on of cable drums or perforated plate side walls (accessories). Add on of lateral cable conduits only ex-works. The PLUS workbench bases are prepared to receive drawers with a separate locking device, i.e. the drawers are individually lockable (these drawers can only be supplied ex-works and are not subsequently retrofittable). Ordering examples PLUS stationary Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Side walls prepared for adding on of PLUS accessories. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. Carrying capacity: 70 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Doors with plastic handles Interior equipment according to description Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized 1500 width Thickness Top type 41.400 700 840 Multiplex 40 Drawers on the left side: 3 x 200 with individual locking Drawers on the right side: 450 ; 150 ; shelf Ordering examples PLUS mobile with pallet truck base Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 1000 kg. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Side walls prepared for add on of PLUS accessories. With fixed integrated pallet truck base. Drive under height 110. Drive in widths according to table. Top execution according to tables. Drawers with labelling strips and the possibility of labelling with Lista Script labelling system. With drawer catch for mobile use. Carrying capacity: 30 kg with evenly distributed load. Shelves with 25:25 slotted increments. Carrying capacity 50 kg with evenly distributed load. Doors with plastic handles. Interior equipment according to description. Colours: workbench base: powder coated RAL 7035 light grey, Dividers: powder coated according to colour chart, adjustable shelves: galvanized 700 width Top type Thickness 41.359 700 877 Multiplex 40 41.360 700 877 Multiplex 50 Drive in width at front / side: 498 / 550 Drawers: 2 x 75 ; 3 x 150 01/2007; LISTA 2007 www.lista.com 127
1250 width Top type Thickness 41.355 700 877 Multiplex 40 41.356 700 887 Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 2 x 75 ; 100 ; 150 ; 200 Drawers on the right side: 600 ; 2 shelves 1250 width Top type Thickness 41.357 700 877 Multiplex 40 41.358 700 887 Multiplex 50 Drive in width at front / side: 1036 / 550 Drawers on the left side: 450 ; 150 ; 2 shelves Drawers on the right side: 2 shelves Ordering examples PLUS mobile Equipment: workbench base in non-positive push-fit and screw connection. Carrying capacity 400 kg. Outside and inside walls with slotted holes for inserting the workbench accessories. With central lock and cylinder lock, individually locking. Side walls prepared for adding on of "PLUS accessory components. With front push hand in addition to 2 fixed and 2 swivel castors. Bearing surface in black solid rubber. Wheel diameter: 125. Swivel castors with double stop. Top execution according to tables. Drawers with labelling strips and the possibility of labelling using the Lista Script labelling system. With drawer safety catch for mobile use. Carrying capacity: 30 kg with evenly distributed load. Shelves in 25:25 slotted increments. Carrying capacity 50 kg evenly distributed load. Doors with plastic handles. Interior equipment according to description. Colours: workbench base powder coated RAL 7035 light grey, dividers: powder coated according to colour chart, adjustable shelves: galvanized 700 width Thickness Top type 41.401 700 877 Multiplex 40 Drawers: 2 x 75 ; 3 x 150 128 www.lista.com 01/2007; LISTA 2007
component parts workbench substructure standard and plus Workbench substructure in non-positive push-fit and screw connection. Outside and inside walls with slotted holes for inserting the workbench inserts. With central locking and cylinder lock, individually locking. Additionally for PLUS execution: interior increments prepared to receive PLUS installation sets and drawers with individual locking. Side walls prepared for addition of PLUS add on parts Stationary workbench substructures Carrying capacity 1000 kg. Colour: powder coated RAL 7035 light grey Clear height Execution 41.588 578 600 800 600 1-part 41.589 1116 600 800 600 2-part 41.590 1654 600 800 600 3-part 41.591 2232 600 800 600 4-part 41.348 578 600 800 600 1-part PLUS 1) 41.347 1116 600 800 600 2-part PLUS 1) 41.346 1654 600 800 600 3-part PLUS 1) 41.349 2232 600 800 600 4-part PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. Workbench substructures with set-back bottom shelf left Carrying capacity 1000 kg. Left: 2 fixed, set-back bottom shelves for better legroom. Colour: powder coated RAL 7035 light grey, shelves galvanized Clear height Execution 41.578 1116 600 800 600 41.350 1116 600 800 600 PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. Workbench substructures with set-back bottom shelf right Carrying capacity 1000 kg. Right: 2 fixed, set-back bottom shelves for better legroom. Colour: powder coated RAL 7035 light grey, shelves galvanized Clear height Execution 41.579 1116 600 800 600 41.351 1116 600 800 600 PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. 01/2007; LISTA 2007 www.lista.com 129
Workbench substructures with set-back bottom shelf middle Carrying capacity 1000 kg. Middle: 2 fixed, set-back bottom shelves for better legroom. Colour: powder coated RAL 7035 light grey, shelves galvanized Clear height Execution 41.580 1654 600 800 600 41.352 1654 600 800 600 PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. Mobile Carrying capacity 400 kg. With front push handles in addition to 2 fixed and 2 swivel castors. Bearing surface in black solid rubber. Wheel diameter: 125. Swivel castors with double stop. Colour: powder coated RAL 7035 light grey Clear height Execution 41.702 578 600 837 600 1-part 41.703 1116 600 837 600 2-part 41.344 658 600 837 600 1-part PLUS 1) 41.342 1116 600 837 600 2-part PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. mobile with pallet truck base Carrying capacity 1000 kg. With fixed integrated pallet truck base. Drive under height 110. Drive in widths at front 1-part / 2-part: 498 / 1036, at side: 550. Colour: powder coated RAL 7035 light grey Clear height Execution 41.341 658 600 837 600 1-part 41.340 1116 600 837 600 2-part 41.345 658 600 837 600 1-part PLUS 1) 41.343 1116 600 837 600 2-part PLUS 1) 1) simultaneous installation of STANDARD and PLUS drawers possible. 130 www.lista.com 01/2007; LISTA 2007
standard and plus installation kits Installation kits are inserted in the workbench bases at the factory (in blocks from left to right). A selection of installation kits with shelves, hinged doors and drawers are available in many combinations. Execution stationary for use in stationary bases execution mobile for use in mobile bases with a pallet truck base. The execution PLUS includes drawers with a drawer catch, is installed in the PLUS bases and can NOT be retrofitted in already existing workbenches. Notes:please indicate arrangement of the installation kits (from left to right). Without your details, we will always begin with the left. In selecting the installation kits, please observe the lock position of the selected base. Colours: powder coated according to colour chart, adjustable shelves galvanized. STANDARD and PLUS installation kits 2 shelves 1 hinged door, 2 shelves 1 drawer, 1 hinged door, 1 shelf Equipment: 1 hinged door 600, 2 shelves Equipment: 1 drawer 150, 1 hinged door 450, 1 shelf PLUS execution: drawer additionally with cylinder lock and 2 keys. Separately lockable. 2 shelves 41.551 Stationary or mobile 41.552 Stationary or mobile, right 41.553 Stationary or mobile, left 41.554 Stationary or mobile, right 41.555 Stationary or mobile, left 41.361 Stationary, right, PLUS 41.362 Stationary, left, PLUS 41.363 Mobile, right, PLUS 41.364 Mobile, left, PLUS 2 drawers, 1 hinged door, 1 shelf 2 drawers 3 drawers Equipment: drawers 75, 1 hinged door 450, 1 shelf Equipment: 2 x 300 Equipment: 3 x 200 PLUS execution: each drawer additionally with a cylinder lock and 2 keys. Separately lockable. 41.556 Stationary, right 41.557 Stationary, left 41.800 Mobile, right 41.773 Mobile, left 41.558 Stationary 41.774 Mobile 41.559 Stationary 41.775 Mobile 41.365 Stationary, PLUS 41.366 Mobile, PLUS 01/2007; LISTA 2007 www.lista.com 131
3 drawers 3 drawers 4 drawers Equipment: 2 x 150, 1 x 300 Equipment: 1 x 100, 1 x 200, 1 x 300 Equipment: 4 x 150 PLUS execution: each drawer additionally with a cylinder lock and 2 keys. Separately lockable. 41.560 Stationary 41.776 Mobile 41.561 Stationary 41.777 Mobile 41.562 Stationary 41.778 Mobile 41.367 Stationary, PLUS 41.368 Mobile, PLUS 4 drawers 4 drawers 4 drawers Equipment: 1 x 100, 2 x 150, 1 x 200 Equipment: 2 x 100, 2 x 200 Equipment: 2 x 75, 1 x 150 m, 1 x 300 41.563 Stationary 41.779 Mobile 41.564 Stationary 41.780 Mobile 41.565 Stationary 41.781 Mobile 4 drawers 5 drawers 5 drawers Equipment: 3 x 100, 1 x 300 Equipment: 2 x 75, 3 x 150 Equipment: 3 x 100, 2 x 150 41.566 Stationary 41.782 Mobile 41.567 Stationary 41.783 Mobile 41.568 Stationary 41.784 Mobile 132 www.lista.com 01/2007; LISTA 2007
5 drawers 5 drawers 75, 75, 75, 75, 300 Equipment: 2 x 75, 1 x 100, 1 x 150, 1 x Equipment: 4 x 100, 1 x 200 Equipment: 4 x 75, 1 x 300 200 41.569 Stationary 41.785 Mobile 41.570 Stationary 41.786 Mobile 41.571 Stationary 41.787 Mobile 6 drawers 6 drawers 6 drawers Equipment: 4 x 75, 2 x 150 Equipment: 2 x 75, 3 x 100, 1 x 150 Equipment:6 x 100 41.572 Stationary 41.788 Mobile 41.573 Stationary 41.789 Mobile 41.574 Stationary 41.790 Mobile 6 drawers 7 drawers 8 drawers Equipment: 4 x 75, 1 x 100, 1 x 200 Equipment: 4 x 75, 3 x 100 Equipment: 8 x 75 41.575 Stationary 41.791 Mobile 41.576 Stationary 41.792 Mobile 41.577 Stationary 41.793 Mobile 01/2007; LISTA 2007 www.lista.com 133
installation kits standard and plus Installation kits are inserted in the workbench bases at the factory (within the block from top to bottom in blocks from left to right). A selection of hinged doors, shelves and drawers is available. Execution stationary for use in stationary bases execution mobile for use in mobile bases or bases with a pallet truck base. The PLUS execution includes drawers with a drawer catch, is installed in the PLUS bases and can NOT be retrofitted in already existing workbenches. Notes:please indicate arrangement of the installation kits (within the block fro top to bottom in blocks from left to right). Without your details, we will always begin with the left. In selecting the installation kits, please observe the lock position of the selected base. Colours: powder coated according to colour chart, adjustable shelves galvanized. Hinged doors, STANDARD and PLUS Sheet steel hinged doors with vertical full-length handles, locked by central locking system on the inner panel. Doors can be installed to left or right. Colour: according to colour chart. Execution 41.584 450 Doors installed on the right side 41.586 600 Doors installed on the right side 41.583 450 Doors installed on the left side 41.585 600 Doors installed on the left side Shelves, STANDARD and PLUS Steel sheet shelf. Shelves adjustable with 25:25 slotted increments. Can be optionally used in the open compartment or behind hinged doors. Carrying capacity 50 kg, galvanized. Thickness Carrying capacity kg 41.587 493 539 25 50 Drawers stationary, STANDARD and PLUS Sheet steel drawers with ball-bearing guides. Execution stationary for use in stationary bases. Front with full-width handle/labelling strip and the possibility of labelling with the Lista Script labelling system. Locking is performed by the central lock of the workbench. Drawer division with Lista dividing material. The PLUS execution includes drawers with individual locking incl. 2 separately locking keys, is installed in PLUS bases and can NOT be retrofitted in already existing workbenches. Colour: powder coated according to colour chart. Front height Useful height Side / back height Carrying capacity kg Type 41.598 75 65 50 70 41.599 100 90 75 70 41.600 150 140 125 70 41.601 200 190 125 70 41.602 300 290 125 70 41.370 75 65 50 70 PLUS 41.372 100 90 75 70 PLUS 41.374 150 140 125 70 PLUS 41.376 200 190 125 70 PLUS 41.378 300 290 125 70 PLUS Useful width: 459 = 27 units of 17 Useful depth: 510 = 30 units of 17 134 www.lista.com 01/2007; LISTA 2007
Drawers mobile Sheet steel drawers with ball-bearing guides. Execution mobile for use in mobile bases or bases with a pallet truck base. Front with full-width handle/labelling strip and the possibility of labelling with the Lista Script labelling system. Locking is performed by the central lock of the workbench. Drawer division with Lista dividing material. The PLUS execution includes drawers with individual locking incl. 2 separately locking keys, is installed in PLUS bases and can NOT be retrofitted in already existing workbenches. Colour: powder coated according to colour chart. Front height Useful height Side / back height Carrying capacity kg Type 41.725 75 65 50 30 41.726 100 90 75 30 41.727 150 140 125 30 41.728 200 190 125 30 41.729 300 290 125 30 41.371 75 65 50 30 PLUS 41.373 100 90 75 30 PLUS 41.375 150 140 125 30 PLUS 41.377 200 190 125 30 PLUS 41.379 300 290 125 30 PLUS Useful width: 459 = 27 units of 17 Useful depth: 510 = 30 units of 17 01/2007; LISTA 2007 www.lista.com 135
workbench Tops Workbench tops. Standard execution optionally in beech Multiplex or beech solid wood tops. Optional with front steel edge protection or steel sheet covering for all system workbenches. Further executions with resistance against chemical, thermal and mechanical stresses or tops in conductible execution on request. Multiplex tops 40 / 50 thick Cross glued and impregnated from several layers of veneer. Optionally with angled steel edge protection or with sheet cover. Multiplex tops 40 / 50 thick Top length Top thickness Top depth 41.240 700 40 700 88.613 1250 40 700 88.614 1500 40 700 88.615 2000 40 700 88.820 2500 40 700 41.241 700 50 700 88.926 1250 50 700 88.927 1500 50 700 88.928 2000 50 700 88.929 2500 50 700 Multiplex tops, 40 / 50 thick, with steel edge protection at front Angled steel edge protection, galvanized. Top length Top thickness Top depth 41.305 700 40 700 41.309 1250 40 700 41.313 1500 40 700 41.317 2000 40 700 41.321 2500 40 700 41.306 700 50 700 41.310 1250 50 700 41.314 1500 50 700 41.318 2000 50 700 41.322 2500 50 700 Multiplex tops, 40 / 50 thick, with sheet cover Sheet cover, galvanized, 1 thick, with front bevel in top thickness. Top length Top thickness Top depth 41.307 700 40 700 41.311 1250 40 700 41.315 1500 40 700 41.319 2000 40 700 41.323 2500 40 700 41.308 700 50 700 41.312 1250 50 700 41.316 1500 50 700 41.320 2000 50 700 41.324 2500 50 700 136 www.lista.com 01/2007; LISTA 2007
Beech tops 50 thick Workbench top in solid beech: solid wood top, glued wooden blocks, dovetailed, sanded, impregnated. Surface naturally coloured. Optionally with angled steel edge protection. Solid beech tops Top length Top thickness Top depth 41.325 700 50 700 41.326 1250 50 700 41.327 1500 50 700 41.328 2000 50 700 41.329 2500 50 700 Solid beech tops, with steel edge protection at front Angled steel edge protection, galvanized. Top length Top thickness Top depth 41.335 700 50 700 41.336 1250 50 700 41.337 1500 50 700 41.338 2000 50 700 41.339 2500 50 700 Retainer tops Retainer tops are used as rear or side protection against rolling off. 100 high, Top projection with top thickness 40 / 50 : 60 / 50, 10 thick. Cannot be used in conjunction with workbench bases (third level)! In Multiplex. Rear panel strips in Multiplex 41.244 700 100 61.000 1250 100 61.001 1500 100 61.002 2000 100 61.003 2500 100 Side panel strips in Multiplex Applied optionally on the left or right (please state). 41.964 710 100 01/2007; LISTA 2007 www.lista.com 137
workbench add-ons plus For adding on to workbenches and "PLUS" workbench bases. Cable drum, lateral for PLUS workbenches Alternating current cable drum with holder. Can be optionally installed on the right or left. 25 m rubber lead HO7RNF 3 x 1.5 ² 250 V, 16 A, CE/GS and TÜV mark. Also for use in the open, protected against water projections. Holder on workbench RAL 7035 light grey Cable drum RAL 5009 azure blue Incl. screw fittings. Can also be retrofitted. Execution 41.398 3 schuko sockets with flap Power conduit, lateral for PLUS stationary workbenches Lateral EURO type power conduit incl. fixing bracket for lateral, vertical attachment to the workbench (optionally 1 conduit base section in sheet steel, 1 thick, with cover rail. Colour: RAL 7035 light grey. right or left), 600 high. Complete installa- 1 conduit cover profile in PVC. Colour: RAL 7021 tion conduit, pre-wired and installed, workshop tested, black. according to the current regulations, VDE 0100, DIN VDE 0620/05.92 and DIN VDE 0632/04.91 BGV A2 1 set of conduit end pieces. Colour: RAL 7035 light grey. Cannot be retrofitted. (formerly VBG 4). Schuko Compressed air socket 10 bars Preferably for top length 41.397 2 2 600 1500, 2000 or 2500 Perforated plate wall, lateral for PLUS workbenches Side add-on wall for system workbench, with field of holes 10 x 10 - Slotted increments 38:38 for perforated wall hooks, incl. screw fittings RAL 7035 light grey. Can also be retrofitted. 41.390 590 456 138 www.lista.com 01/2007; LISTA 2007
partition material ordering examples For front height 41.468 75-300 9 trough-shaped parts 4-part 40 trough walls 4-part For front height 41.469 75-300 12 boxes 75 x 150 3 boxes 150 x 150 For front height 41.471 75 41.472 100 3 trough-shaped parts 3-part 15 trough walls 3-part 6 trough-shaped parts 2-part 10 trough walls 2-part For front height 41.473 75 8 boxes 75 x 75 8 boxes 150 x 75 3 boxes 150 x 150 For front height 41.474 75 41.475 100 41.476 150-300 3 Slotted partitions 30E 8 dividers 6E 2 dividers 9E Important! Cannot be used for drawers with PLUS individual locking. For front height 41.477 75 41.478 100 41.479 150-300 2 Slotted partitions 30E 6 dividers 9E 2 dividers 9E Important! Cannot be used for drawers with PLUS individual locking. 01/2007; LISTA 2007 www.lista.com 139
workbench superstructures component parts Support pillars on bench tops Support pillars packaging units: optionally 2 or 3 items. 915 high from table upper edge. Incl. fastening material. Attachment on the workbench top on site. (Top thickness at least 40 ). Execution: steel profile, perforated with a division of 50 for screwless installation of the superstructure parts. Colour: powder coated RAL 7035 light grey. Column height from bench surface for top length (preferably) 41.385 915 1250 / 1500 2 41.386 915 2000 / 2500 3 Number of columns items Rear panels, perforated Rear panels can be installed without screws in the support pillars. With 4-edge perforation 10 x 10, slotted increments 38:38 for fitting with a perforated wall hook system. Nominal height: 450. Max. 2 items can be installed above one another in support pillars. In steel sheet. Colour: powder coated RAL 7035 light grey. Nominal height Nominal width for top length (preferably) 41.387 450 1000 _ 41.388 450 1250 _ 41.389 450 1500 1500 Perforated plate hook systems: see INCREMENT PLAN FOR PERFORATED PLATES. Container strips Container strips can be installed without screws in the support pillars. With receptacles for equipping with storage bins. In steel sheet. Colour: powder coated RAL 7035 light grey. for top length (preferably) 41.391 1000 85 2 x 1000 = 2000 41.392 1250 85 1250 or 2 x 1250 = 2500 41.393 1500 85 1500 Storage bins Size 2 Colour Capacity dm 3 80.737 Red 103 93 52 0.26 80.728 Blue 103 93 52 0.26 80.738 Green 103 93 52 0.26 80.768 Yellow 103 93 52 0.26 Size 3 Colour Capacity dm 3 80.733 Red 103 168 76 0.90 80.729 Blue 103 168 76 0.90 80.724 Green 103 168 76 0.90 80.702 Yellow 103 168 76 0.90 140 www.lista.com 01/2007; LISTA 2007
Size 4 Colour Capacity dm 3 80.734 Red 149 233 121 2.70 80.730 Blue 149 233 121 2.70 80.725 Green 149 233 121 2.70 80.721 Yellow 149 233 121 2.70 Accessories for size 2 Number 80.740 Transparent foil 73 11 10 80.739 Labelling strips 73 11 10 Accessories for size 3 Number 80.742 Transparent foil 75 20 10 80.741 Labelling strips 75 20 10 Accessories for size 4 / 5 / 6 Number 88.106 Transparent foil 100 35 10 88.105 Labelling strips 100 35 10 Rear plates as protection against rolling out Rear plates can be installed without screws in the support pillars. They prevent objects from falling down at the back. In steel sheet. Colour: powder coated RAL 7035 light grey. for top length (preferably) 41.394 1000 100 2x 1000 = 2000 41.395 1250 100 1250 or 2 x 1250 = 2500 41.396 1500 100 1500 01/2007; LISTA 2007 www.lista.com 141
installation conduits Ordering examples Complete installation conduit for wall or bracket fitting. Fully wired and installed, factory-tested according to current regulations: VDE 0100, DIN VDE 0620/05.92 and DIN VDE 0632/04.91, BGV A2 (formerly VBG 4). 1 conduit sub-frame made of (galvanized) sheet steel, 1 thick, with top rail. Colour: light grey RAL7035. 1 conduit cover profile made of PVC. Colour: black RAL7021. 1 set of conduit end pieces. Colour: light grey RAL7035. Schuko sockets 230V, 16A CEEsockets 400V, 16A, 6h, red Compressed air connectors 10bar 41.891 4 1 1500 41.892 4 2 1500 41.898 4 1 2000 41.899 4 2 2000 Fixing brackets Fixing brackets Incl. integrated shelf, 235 high, 150 deep. (For installation of 133 high installation conduits; can be screwed to the rear of the workbench top. Drilling holes for fixing the bracket already exist.) Incl. fastening material. Execution: steel sheet. Colour: light grey RAL 7035. Not for use with support pillar systems. 41.874 1250 235 41.855 1500 235 41.875 1750 235 41.856 2000 235 41.876 2500 235 Hooks for support pillar system Support hooks for installation duct (PU = 2 items) for installation of the installation duct on the support column system. Incl. screw fixings for fastening the hooks to the installation conduct on site Colour RAL 7035 light grey. 41.403 Conduit component parts Installation conduit for fitting the housing units described below. Without conduit end pieces, housing units or cable. Intended for mounting on wall or securing brackets. Conduit Installation conduit for fitting the housing units described below. Without conduit end pieces, housing units or cable. Intended for mounting on wall or securing brackets. 1 conduit sub-frame made of (galvanized) sheet steel, 1 thick, with top rail. Colour: light grey RAL 7035. 1 conduit cover profile made of plastic. Colour: black RAL 7021. 1 conduit sub-frame made of (galvanized) sheet steel, 1 thick, with top rail. Colour: light grey RAL 7035. 1 conduit cover profile made of plastic. Colour: black RAL 7021. 41.869 1250 133 41.870 1500 133 41.871 1750 133 41.872 2000 133 41.873 2500 133 142 www.lista.com 01/2007; LISTA 2007
Conduit end pieces per kit Galvanized steel sheet 1 thick, for closing conduit end. With coupling for earth conductor. 1 conduit end piece prepared with drillings for PG 13.5 and 16, to receive the mains lead cleat and a drilling for the earth cable. 1 conduit end piece, prepared with a drilling for push-fit nipple and a drilling for the earth cable. 1 set = 2 items. Colour: RAL light grey 7035. 41.901 Conduit end pieces per kit Couplings, per pair For connecting the conduit joins when several conduits are installed next to each other. Execution: steel sheet, galvanized. 41.904 Couplings, per pair Cover frame for housing units Conduit frame, 2 part, black. Used to cover the respective housing units. For retrofitting. 41.900 140 80 Conduit equipment independent of voltage Housing unit with earthing contact socket Installed as a unit with plug connections, for supply on site of the mains and connection cable. Consisting of: housing unit with 2 earthing contact sockets with flap, incl. cover frame, 80. Colour: black. 41.877 Housing unit, housing length 210 (without connection cable) Housing unit for safety cutout Ready installed, for covering safety cutouts and FI protection switches. 41.902 Housing unit, length housing 338 Safety cutout Installed as a unit with a plug connection for on-site supply of the mains and connecting cable. Consisting of: housing unit with safety cutout incl. cover frame, 80. Colour: black. 41.880 Housing unit, 1 pole, B 16A, housing length 210 (without connection cable) 41.881 Housing unit, 3 pole, B 16A, housing length 255 (without connection cable) FI protective switch Installed as a unit with a plug connection for on-site supply of the mains and connecting cable. Consisting of: housing unit with safety cutout incl. cover frame, 80. Colour: black. 41.882 Housing unit, 25 / 0,03A, 2 pole, housing length 210 (without cable) 41.883 Housing unit, 25 / 0,03A, 4 pole, housing length 255 (without cable) 01/2007; LISTA 2007 www.lista.com 143
On/off switch Installed as a unit with a plug connection for on-site supply of the mains and connecting cable for workplace lights. Consisting of: housing with on/off switch and earthing-socket incl. cover frame, 80. Colour: black. 41.884 Housing unit without top flap.housing length 210 (without cable) 41.903 Housing unit with top flap, length housing 210 (without cable) EMERGENCY STOP switch Installed as a unit with a plug connection for on-site supply of the mains and connecting cable for locking on to the on-site emergency stop device. Consisting of: housing unit with emergency stop switch, on red/yellow backing incl. cover frame, 80. Colour: black. 41.885 Housing unit, EMERGENCY STOP switch, manually locked, housing length 210 (without cable) 41.886 Housing unit, EMERGENCY STOP switch, with padlock, housing length 210 (without cable) Compressed air socket Installed as a unit with compressed air connection 10 bar, single-hand coupling R 1 4 inches external thread (in brass). Consisting of: housing unit with 2 compressed air connections (2 single-hand couplings) at the front with 1 rapid-release coupling and 1 plug-in nipple (for connection to one another). 1 compressed air line, Ø 11 / 6.3 pre-installed with 1 rapid coupling and 1 insertion bush for line, LW 6. 1 frame 80, black. 41.887 Housing unit, housing length 230 (with coupling) Compressed air line Compressed air line LW 6, with insertion bush and mini line coupling in addition to hose clamps, for connection of compressed air housing units with series installations. 41.910 750 41.911 1000 41.912 1250 41.913 1500 41.914 2000 Conduit equipment 230V, 3-pole Connection cable 230V Initial mains cable, 3 x 1.5 2 for mains connection. Execution GST 18/3, crimped bush. Equipped with plug on one side, 3-pole, Connected load of bus, free end (CEB = conductor end bush), system plug (Wieland). Colour: black. 41.533 500 41.534 1000 41.535 1500 41.536 2000 41.537 3000 144 www.lista.com 01/2007; LISTA 2007
Connection cable 230V Cable, 3 x 1.5 2 for connecting current distributors and power strips, tables with one another or between current distributors and sockets. Execution: GST 18/3, plug bush crimped. Colour: black. 41.528 500 41.529 1000 41.530 1500 41.531 2000 41.532 3000 Current distributor (distributor block) 230V Distributor block for 1 input and 3 outputs, incl. fixing for standard profile. Used for distribution to the respective housing units. Colour: black. 41.538 70 58 60 Coupling, 230V For directly connecting housing units together. Possible replacement for connecting cable. Distance between housing units 78. Execution: GST 18/3, plug socket screwed. Colour: black. 41.527 VK-0 coupling Conduit equipment 400V, 5-pole Connection cable 400V Initial mains cable, 5 x 1.5 2 for mains connection. Execution GST 18/5, crimped bush. Equipped with plug on one side, 5-pole, Connected load of bush, free end (CEB = conductor end bush), system plug (Wieland). Colour: black. 41.539 500 41.540 1000 41.541 1500 41.542 2000 41.543 3000 Connection cable 400V Cable, 5 x 1.5 2 for connecting current distributors and power strips, tables with one another or between current distributors and sockets. Execution: GST 18/5, plug bush crimped. Colour: black. 41.544 500 41.545 1000 41.546 1500 41.547 2000 41.548 3000 01/2007; LISTA 2007 www.lista.com 145
Current distributor (distributor block) 400V Distributor block for 1 input and 5 outputs, incl. fixing for standard profile. Used for distribution to the respective housing units. Colour: black. 41.549 70 58 60 Coupling, 400V For directly connecting housing units together. Possible replacement for connecting cable. Distance between housing units 78. Execution: GST 18/5, plug socket screwed. Colour: black. 41.550 VK-0 coupling Housing unit with EEC socket Installed as a unit with plug connections, for on-site supply of the mains and connecting cable. Consisting of: housing unit with EEC socket in straight execution, 16A / 400V, 6h, red. Incl. cover frame 80. Colour: black. 41.878 Housing unit 146 www.lista.com 01/2007; LISTA 2007
01/2007; LISTA 2007 www.lista.com 147
OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material 148 www.lista.com 01/2007; LISTA 2007
Table of content Stands and assembly trolleys Introduction 150 Ordering examples 152 Component parts 156 Storage containers 159 01/2007; LISTA 2007 www.lista.com 149
STANDS AND ASSEMBLY TROLLEYS Stands and assembly trolleys compliment the workstation system and can save time with locating items. This system of space saving stands and assembly trolleys isideal for transportation or temporary storage of parts or assemblies. Individual components can be combined into stands or trolleys to meet customer-specific requirements. Supplied as flat packs for quick and easy assembly. Lista,makingworkspace work. THE STANDARD COLOURS For technical reasons, the printed colours shown here may differ from the original shades. capri blue RAL 5019 light blue RAL 5012 reseda green RAL 6011 ruby red RAL 3003 pure white RAL 9010 lightgrey RAL 7035 metallic grey NCS S 6502-B black NCS S 9000-N 150 www.lista.com 01/2007; LISTA 2007
DIMENSIONS AND CARRYING CAPACITIES Nominal width A B C D E Specification Assembly trolley single-sided 750 800 510 1636 300 720 1000 1050 510 1636 300 970 double-sided 750 800 710 1636 320 720 1000 1050 710 1636 320 970 Stand single-sided 750 800 510 1522 300 720 1000 1050 510 1522 300 970 double-sided 750 800 710 1522 320 720 1000 1050 710 1522 320 970 Pillar spacing F = 23 x 50 T ragfähigkeiten Max. carrying capacity Loading Position kg Per assembly unit 1 250 with evenly distributed load 2 250 with evenly distributed load Per holding rail 3 15 with evenly distributed load Per adjustable shelf 4 25 with evenly distributed load Per adjustable shelf 5 50 with evenly distributed load Per storage shelf 6 50 with evenly distributed load 01/2007; LISTA 2007 www.lista.com 151
stands and assembly Trolleys ordering examples,single-sided 3 hinged shelves Nominal width 90.294 750 90.295 1000 Equipment: 2 castors 2 castors with brake 3 hinged shelves 430 deep, each with a carrying capacity of 50kg Max. assembly trolley load 250kg. 4 adjustable shelves Nominal width 90.296 750 With securing bracket 90.297 1000 With securing bracket 90.346 750 With raised edge 90.347 1000 With raised edge Equipment: 2 castors 2 castors with brake 4 hinged shelves 350 deep, each with a carrying capacity of 25kg 4 ribbed mats Max. assembly trolley load 250kg. 5 container strips, 2 hinged shelves Nominal width Securing bracket 90.354 750 Without 90.355 1000 Without 90.334 750 With 90.335 1000 With Equipment: 2 castors 2 castors with brake 5 container strips, carrying capacity of 15kg 14/ 8 storage containers size 2, red * 14/18 storage containers size 3, yellow * 10/12 storagecontainers size 4, blue * 2 hinged shelves, each with a carrying capacity of 50kg Max. assembly trolley load 250kg. * Number of storage containers on nominal width 750/1000 152 www.lista.com 01/2007; LISTA 2007
4 container strips, 1 shelf per type Nominal width Securing bracket 90.356 750 Without 90.357 1000 Without 90.336 750 With 90.337 1000 With Equipment: 2 castors 2 castors with brake 4 container strips, carrying capacity of 15kg 14/18 storagecontainers size 2, rot * 21/27 storage containers size 3, gelb * 1 adjustable shelf 350 deep, with raised edge 1 hinged shelf, carrying capacity 50kg 1 torage shelf 3 ribbed mats Max. assembly trolley load 250kg. * Number of storage containers on nominal width 750 / 1000 01/2007; LISTA 2007 www.lista.com 153
ordering examples,double-sided 8 adjustable shelves Nominal width 90.298 750 With securing bracket 90.299 1000 With securing bracket 90.348 750 With raised edge 90.349 1000 With raised edge Equipment: 2 castors 2 castors with brake 8 adjustable shelves 350 deep, each with a carrying capacity of 50kg 8 ribbed mats Max. assembly trolley load 250kg. 10 container strips, 4adjustable shelves Nominal width Securing bracket 90.352 750 Without 90.353 1000 Without 90.338 750 With 90.339 1000 With Equipment: 2 castors 2 castors with brake 10 container strips, each with a carrying capacity of 15kg 28/36 storage containers size 2, red * 28/36 storage containers size 3, yellow * 20/24 storage containers size 4, blue * 4 adjustable shelves 350 deep, with raised edge, each with a carrying capacity of 50kg 4 ribbed mats Max. assembly trolley load 250kg. * Number of storage containers on nominal 750/1000 18 container strips Nominal width Securing bracket 90.350 750 Without 90.351 1000 Without 90.340 750 With 90.341 1000 With Equipment: 2 castors 2 castors with brake 18 container strips, each with a carrying capacity of15kg 56/72 storage containers size 2, red * 56/72 storage containers size 3, yellow * 30/36 storage containers size 4, blue * Max. assembly trolley load 250kg. * Number of storage containers on nominal 750/1000 154 www.lista.com 01/2007; LISTA 2007
6 adjustable shelves Nominal width 90.342 750 90.343 1000 Equipment: 4 adjustable feet 6 adjustable shelves 350 deep, with raised edge, each with a carrying capacity of 25kg Max. assembly trolley load 250kg. 01/2007; LISTA 2007 www.lista.com 155
component parts Assembly trolley Assembly trolleys are single- or double-sided. Supports allow installation of hinged or adjustable shelves and holding rails without the need for screws. Trolleys are equipped with 4 castors, 2 of which have brakes. Specification: steel frames and supports, holes at front and rear at 50 increments. Colour: according to colour chart. Castor housing of galvanized and chromated sheet steel. Rubber castors. Rubber wheels in grey. Nominal width Nominal height 90.284 750 1640 800 1636 510 90.286 1000 1640 1050 1636 510 90.288 750 1640 800 1636 710 90.290 1000 1640 1050 1636 710 With 4 castors, 2 with brakes. Wheel diameter 100. Max. carrying capacity 250kg Stands Stands are single- or double-sided. The support pillars allow fitting of hinged or adjustable shelves and holding rails without the need for screws. Stands are equipped with 4 adjustable feet. Specification: steel frames and supports, holes at front and rear at 50 increments. Colour: according to colour chart. Adjustable feet in black. Nominal width Nominal height 90.285 750 1520 800 1522 510 90.287 1000 1520 1050 1522 510 90.289 750 1520 800 1522 710 90.291 1000 1520 1050 1522 710 With 4 adjustable feet. Max. carrying capacity 250kg Container strips For containers of size 2, 3 and 4, inserts into supports, no fixing screws required. Specification: sheet steel. Colour: light grey RAL7035. For container size Quantity of containers 39.440 750 85 2, 3, 4 7-14, 7, 5 39.441 1000 85 2, 3, 4 9-18, 9, 6 Security bracket For holding rail. Can be fitted later. Fixed to the rail to prevent storage containers dislodging during transport when the floor is uneven. Includes fixing materials. Specification: sheet steel. Colour: according to colour card. Nominal width Nominal height 90.319 750 85 700 83 90.320 1000 85 950 83 156 www.lista.com 01/2007; LISTA 2007
Fixed container strips Rail complete with securing bracket. Specification: sheet steel. Colour: light grey RAL7035. Nominal width Nominal height 90.344 750 95 745 93 90.345 1000 95 995 93 Adjustable shelves, plain, with raised edge Shelves are fitted with one longitudinal raised edge. Adjustable shelves can be fitted with raised edge either to front or rear. The shelves are fitted with two brackets into supports, either horizontally or at an angle of 15. No fixing screws required. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 39.363 750 300 750 295 39.364 750 350 750 345 39.365 1000 300 1000 295 39.366 1000 350 1000 345 Including two brackets each. Max. load: 25kg Shelf height: 25 + 17 strip Adjustable shelves plain with raised sides Raised sides prevent items dislodging during transport when the floor is uneven. Adjustable shelves can be fitted with raised side either on the left or right side. With the two adjustable shelf brackets supplied, the shelves are fitted either horizontally or at an angle of 15 in the supports, without the need for screws. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 90.321 750 300 750 295 90.322 750 350 750 345 90.323 1000 300 1000 295 90.324 1000 350 1000 345 Each shelf includes two adjustable shelf brackets. Shelf height: 25 + 17 raised edge Carrying capacity: 25kg Hinged shelves Using the two brackets supplied, hinged shelves are installed in the frame without the need for screws, and are infinitely adjustable between the horizontal and 30. The raised edge at the front and rear stops items dislodging. Specification: sheet steel with clamping lever. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 90.292 750 430 714 424 90.293 1000 430 964 424 Shelf height: 25 + 17 raised edge Carrying capacity: 50kg 01/2007; LISTA 2007 www.lista.com 157
Storage shelves The storage shelf is installed between the stand support pillars. Specification: sheet steel. Colour: according to colour chart. Nominal width Nominal depth Useful width Useful depth 90.325 750 510 805 489 single-sided 90.326 750 710 805 689 double-sided 90.327 1000 510 1055 489 single-sided 90.328 1000 710 1055 689 double-sided Carrying capacity: 50kg Ribbed shelf mat Non-slip ribbed rubber mat for shelves. Colour: grey. Suitable for Adjustable shelf, with and without raised sides Nominal width Nominal depth Useful width Useful depth Material 42.773 750 300 747 293 Rubber 42.774 750 350 747 343 Rubber 42.775 1000 300 997 293 Rubber 42.776 1000 350 997 343 Rubber Suitable for hinged shelf Nominal width Nominal depth Useful width Useful depth Material 42.779 750 430 711 421 Rubber 42.780 1000 430 961 421 Rubber Small light resistance Ribbed shelf mat for storage shelf Nominal width Nominal depth Useful width Useful depth 90.329 750 510 801 486 90.330 750 710 801 686 90.331 1000 510 1051 486 90.332 1000 710 1051 686 Handle The handle is mounted at the side of the vertical stand support pillar, and includes fixing materials. Specification: galvanized sheet steel. Diameter 90.333 500 22 158 www.lista.com 01/2007; LISTA 2007
storage containers, width and height refer to the external dimensions. The storage containers are breakproof, resistant to most acids and alkalis, temperature resistance -40 to +80 C. Specification: polyethylene (PE). Colours: red, blue, green, yellow. Size 2 Colour Capacity dm 3 80.737 Red 103 93 52 0.26 80.728 Blue 103 93 52 0.26 80.738 Green 103 93 52 0.26 80.768 Yellow 103 93 52 0.26 Size 3 Colour Capacity dm 3 80.733 Red 103 168 76 0.90 80.729 Blue 103 168 76 0.90 80.724 Green 103 168 76 0.90 80.702 Yellow 103 168 76 0.90 Size 4 Colour Capacity dm 3 80.734 Red 149 233 121 2.70 80.730 Blue 149 233 121 2.70 80.725 Green 149 233 121 2.70 80.721 Yellow 149 233 121 2.70 Size 5 Colour Capacity dm 3 80.735 Red 209 343 200 10.40 80.731 Blue 209 343 200 10.40 80.726 Green 209 343 200 10.40 80.722 Yellow 209 343 200 10.40 Size 6 Colour Capacity dm 3 80.736 Red 313 497 200 23.50 * 80.732 Blue 313 497 200 23.50 * 80.727 Green 313 497 200 23.50 * 80.723 Yellow 313 497 200 23.50 * * These storage bins do only fit diagonally in container cabinets. Accessories For size 2 Number 80.740 Transparent foil 73 11 10 80.739 Labelling strips 73 11 10 01/2007; LISTA 2007 www.lista.com 159
For size 3 Number 80.742 Transparent foil 75 20 10 80.741 Labelling strips 75 20 10 For size 4 / 5 / 6 Number 88.106 Transparent foil 100 35 10 88.105 Labelling strips 100 35 10 160 www.lista.com 01/2007; LISTA 2007
01/2007; LISTA 2007 www.lista.com 161
OVERVIEW Drawer systems NC storage and transport systems Workstations > Workstation systems > Workbenches > Modular workbenches > Stands and assembly trolleys > Chairs and stools Clothes lockers and material cabinets Shelf systems Dynamic storage technology Office systems ESD Electronic locking systems and access control systems Partition material 162 www.lista.com 01/2007; LISTA 2007
Table of content Chairs and stools Introduction 164 Chairs and stools 165 01/2007; LISTA 2007 www.lista.com 163
CHAIRS AND STOOLS All models take ergonomic considerations in to account. They have all been designed to take advantage of the latest physiological standards, and have been tested many times over. They can beadjusted tomatch every physique and working position. These chairs are exceptionally robust and of rugged constructionfor hard use. Lista,making workspace work. 164 www.lista.com 01/2007; LISTA 2007
chairs and stools The small universal Swivel stool with super soft seat of hard-wearing, selfskinned foam or wood. Liftomatik height adjustment. 5-prong plastic base. Specification: wood: beech. With Glides Adjustment of seat height Specification Seat 64.504 380-514 With glides Black 64.508 380-514 With glides Wood With Castors Adjustment of seat height Specification Seat 64.509 410-534 With castors Black 64.510 410-534 With castors Wood The big universal Seat of hard-wearing, selfskinned foam or wood. Very stable workshop stool with steel base ring. Liftomatik height adjustment. Specification: wood: beech. Adjustment of seat height Specification Seat 64.505 540-740 With glides Black 64.511 540-740 With glides Wood The small Seat and back made of hard-wearing, selfskinning foam or wood. Smooth seat height adjustment with gas spring. 5-prong steel base with plastic covering. Specification: wood: beech. With Glides Adjustment of seat height Specification Seat 64.500 440-630 With glides Black 64.512 440-630 With glides Wood 01/2007; LISTA 2007 www.lista.com 165
With Castors Adjustment of seat height Specification Seat 64.501 420-555 With castors Black 64.513 420-555 With castors Wood The medium Ergonomically-designed seat and back made of hardwearing, selfskinning foam or wood. With flexible to and fro back support, height adjustable with chrome stop bar and multi-plated incline adjustment device for individual preference. Liftomatik height adjustment. 5-prong base with two footrests. Specification: wood: beech. Adjustment of seat height Specification Seat 64.502 580-770 With glides Blach 64.514 580-770 With glides Wood The large Ergonomically-designed seat and back made of hardwearing, selfskinned foam or wood. Liftomatik height adjustment. Seat and height adjustment asynchronous. With flexible to and fro back support, adjustable in height. Extremely stable base with three footrests. Specification wood: beech. Adjustment of seat height Specification Seat 64.503 480-880 With glides Back 64.515 480-880 With glides Wood The top Swivel chair with gas spring height adjustment, back horizontally and vertically adjustable. Aluminium die cast 5-prong base. Specification: wood: beech. Adjustment of seat height Specification 64.516 520-710 With glides, backrest and circular footrest 166 www.lista.com 01/2007; LISTA 2007
The standing chair Very stable standing-height chair, lockable seat height adjustment. Seat made of hard-wearing, integral skin foam. Set tilt adjustable by 15. Seat swivels to either side, with automatic centre return. Adjustment of seat height Specification 64.517 600-850 Black 64.518 600-850 Chromium plated 64.519 600-850 Stainless steel The comfortable chair Soft textile upholstery made of robust covering material. Seat height adjustment with gas spring lift mechanism. Gradual back and height adjustment. Colours: Chair base: black RAL 9005. Upholstery: anthracite / other colours on request. Adjustment of seat height Specification 64.506 480-610 With castors The comfortable, electrically conductive chair (ESD) A conductive, upholstered chair specially developed for the electronics industry. Tested according to IEC 61340. Colour: Chair base: black RAL 9005. Upholstery: anthracite. Adjustment of seat height Specification 64.507 440-570 With castors 01/2007; LISTA 2007 www.lista.com 167
168 www.lista.com 01/2007; LISTA 2007