NOVUS 4 Novus 4 is a superior performance universal compressed sheet material based on a blend of aramid/inorganic fibres and special additives, with a high quality nitrile rubber binder system. A superior performance material with excellent mechanical properties, it is suitable for many applications including oils, solvents, high pressure steam and gases including oxygen. APPROVALS/COMPLIANCE DIN-DVGW (Gas Industry) NG-5 AR8 WRAS Potable Water: Registration No. 455 BAM (Oxygen service) up to 9 O C and 6 bar Independently tested to Shell specification MF 94-96 Complies with BS Specification 75 Grade X Colour - White ASTM Oil IRM 9 Oil ASTM F5 ASTM F6 ASTM F6 BS75 ( O C) DIN 59 BS 75.5mm.75g/cc 5MPa 9% 55%min 6MPa MPa <.cc/min.%.5%.% range =.5mm to 6.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = up to a maximum size of 6.m X.m Available with fine mesh mild steel reinforcement: Novus 4 Metallic or gauze mild steel wire reinforcement: Novus 4 GWI Can also be supplied with anti-stick and graphite coating. 8 6 4 Novus 4 5 5 5 5 4 45 pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS Novus is a premium grade compressed sheet material based on carbon fibre with a high quality nitrile rubber binder system. Colour - Black.5mm.57g/cc A universal grade especially suitable for use under alkaline conditions with good steam resistance. It also possesses excellent creep resistance and is suitable for use with oils, fuels and refrigerants. ASTM F5 ASTM F6 ASTM F6 BS75 ( O C) MPa % 6%min 5MPa BS75 <cc/min APPROVALS/COMPLIANCE ASTM Oil.% BS Specification 75 Grade X API 67 Fire Safety IRM 9 Oil.5%.5% Novus range =.4mm to 6.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = Up to a maximum size of 6.m x.m Available with a fine mesh mild steel reinforcement: Novus Metallic, it can also be supplied with anti-stick finish. 8 6 4 Supplied as standard with anti-stick coating. Can also be supplied with graphite coating. 5 5 5 5 4 45 pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS Novus is a good quality compressed sheet material based on aramid fibre with a nitrile rubber binder system. Colour - Yellow.5mm Novus is a general purpose material suitable for use in a wide range of applications, including hot and cold water, steam, oils, fuels, gases and a wide range of general chemicals. ASTM F5 ASTM F6.9g/cc 4MPa 8% ASTM F6 55%min APPROVALS/COMPLIANCE BS75 ( O C) MPa DIN-DVGW (Gas Industry) NG-5AM 6 WRAS Potable Water: Registration No.45 Complies with BS Specification 75 Grade Y ASTM Oil DIN 59 BS 75 9MPa <.cc/min.% IRM 9 Oil 5.%.5% range =.5mm to 6.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = Up to a maximum size of 6.m x.m Available with a fine mesh mild steel reinforcement: Novus Metallic, or gauze mild steel wire reinforcement: Novus GWI It can also be supplied with anti-stick and graphite coating. 8 6 4 Novus 5 5 5 5 4 45 pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS 6 Novus 6 is a premium quality compressed sheet material composed of aramid fibres with a SBR/Natural rubber binder system. It is specially formulated to exhibit controlled swell properties in oil combined with good resistance to water. Novus 6 is particularly suitable for the automotive industry, where controlled swell properties are required. range =.5mm to.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = Up to a maximum size of 6.m x.m Colour - Green ASTM Oil IRM 9 Oil ASTM F5 ASTM F6 ASTM F6 BS75 ( O C) DIN 59 BS 75.5mm.96g/cc.MPa 8% >4% 9MPa <.cc/min -% -7% -4% Can also be supplied with anti-stick coating. Novus 6 8 6 4 5 5 5 5 4 45 pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS Supra Novus Supra is a good quality compressed sheet material based on a blend of aramid and inorganic fibres with a nitrile rubber binder system. Novus Supra is a general purpose material suitable for use in wide range of applications, including hot and cold water, steam, oils, fuels, gases and a wide range of general chemicals. APPROVALS/COMPLIANCE DIN-DVGW (Gas Industry) 9.-e-845 WRAS Potable Water: Registration No.855 Complies with BS Specification 75 Grade Y Colour - Orange ASTM Oil IRM 9 Oil ASTM F5 ASTM F6 ASTM F6 BS75 ( O C) DIN 59 BS 75.5mm.g/cc MPa 9% 5%min MPa 9MPa <.cc/min.% 5.% 4.% range =.4mm to 6.mm Novus (Supra) Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = Up to a maximum size of 6.m x.m Available with fine mesh mild steel reinforcement: Novus Metallic or gauze mild steel wire reinforcement: Novus GWI. Can also be supplied with anti-stick coating and graphite coating. 8 6 4 5 5 5 5 4 45 pressures. Applicable to.5mm and below. or implied by statute or otherwise, as to their products and/or their fitness for any particular purpose. Any technical co-operation between the company and the customer is given for customers assistance only and without liability on the part of the company. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS 45 Novus 45 is a medium quality cost effective compressed sheet material manufactured from virgin fibres and recycled material, with a nitrile rubber binder system. Novus 45 is a general purpose material suitable for use with oils, solvents, gases, water, low pressure steam and most dilute acids and alkalis. range =.4mm to 6.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Colour - Blue ASTM Oil IRM 9 Oil ASTM F5 ASTM F6 ASTM F6 BS75 ( O C) DIN 59 BS 75.5mm.9g/cc MPa % 5%min 8MPa MPa <.cc/min.% 5.% 6.% Standard roll sizes = Up to a maximum size of 6.m x.m Available with gauze mild steel wire reinforcement: Novus 45 GWI. Can also be supplied with anti-stick coating and graphite coating. Novus 45 8 6 4 5 5 5 5 4 45 pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS ACID Novus Acid is a specially formulated compressed sheet material based on a blend of fibres with an acid resistant binder system. Colour - Off White Novus Acid is designed to withstand aggressive chemical environments. A chemical grade material suitable for most acids, alkalis, oils, fuels and refrigerants. range =.4mm to.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = Up to a maximum size of 6.m x.m 95% Sulphuric Acid 6% Hydrochloric Acid 5% Nitric Acid ASTM F5 ASTM F6 ASTM F6 BS75 Novus 48 (Acid).5mm.75g/cc MPa % 5%min <.cc/min 6.% 5.% 7.% 8 6 4 5 5 5 5 4 45 pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS GRAFTEC Colour - Black Novus Graftec is a compressed sheet material which combines a high percentage of graphite, reinforced with aramid fibres and a small amount of rubber binder. Novus Graftec is a high performance material with excellent mechanical properties. It is suitable for many applications including oils, solvents, high pressure steam and gases including oxygen. APPROVALS/COMPLIANCE WRAS Potable Water: Registration No.45 BAM (Oxygen service) up to 9 O C and 6 bar Complies with BS Specification 75 Grade X ASTM Oil IRM 9 Oil ASTM F5 ASTM F6 ASTM F6 BS75 ( O C) DIN 59 BS 75.5mm.65g/cc MPa % 55% 6MPa MPa <.cc/min.%.5%.5% range =.4mm to 6.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = Up to a maximum size of 6.m x.m Available with fine mesh mild steel reinforcement: Novus Graftec Metallic or gauze mild steel wire reinforcement: Novus Graftec GWI. Supplied with anti-stick coating as standard. 8 6 4 Novus 49 (Graftec) 5 5 5 5 4 45 Contact the Novus Technical Team for applications with higher temperatures and pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com
NOVUS 8 Colour - Black/Red Novus 8 is a high compression grade non-asbestos sheet material based on aramid fibres with a high quality nitrile binder system. Novus 8 is specifically designed for use in low bolt-loaded irregular flanges. Typical flanges include glass lined, ceramic, plastic coated or uneven flanges. range =.4mm to.mm Standard sheet sizes =.m x.m,.m x.5m,.m x.m,.5m x.5m,.5m x.m. Standard roll sizes = Up to a maximum size of 6.m x.m Can be supplied with anti-stick coating and graphite coating. ASTM Oil IRM 9 Oil 8 6 4 ASTM F5 ASTM F6 ASTM F6 DIN59 5N/mm 75 O C BS75 BS 75 Novus 8.5mm.7g/cc 8 MPa 6 to 5% >5%min 9MPa <.cc/min.% 4.% 4.% 5 5 5 5 4 45 pressures. Applicable to.5mm and below. Tel: +44 ()74 878787 Fax: +44 ()74 86588 www.novussealing.com e-mail: mailbox@novussealing.com