O OOIO mphenol Industrial hone: -364-9011 191 elaware venue idney, Y 133-1395 www.amphenol-industrial.com otice: pecifications are subject to change without notice. ontact your nearest mphenol orporation ales Office for the latest specifications. ll statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. tatements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. he user should not assume that all safety measures are indicated or that other measures may not be required. pecifications are typical and may not apply to all connectors. 1-2016 mphenol 97 eries onnectors are recognized and recognized.
mphenol eries iniature ylindrical onnectors 12-070-17 www.amphenol-industrial.com mphenol 97 eries onnectors are recognized and recognized.
able of ontents Introduction, mphenol iniature ylindrical age eneral Information, esign lexibility...................1, 2 onnector election uide.......................... 3 Insert availability................................ 4, 5 lternate positioning................................ 6 Insert arrangement patterns........................... 7-10,, / roprietary/i--2642, eries 1 ayonet oupling, older ontacts eneral Information, pecifications, ervice lass........... 11, 12 00 (3110), 00 wall mounting receptacle.............. 13 01 (3111) cable connecting receptacle................ 14 02 (3112) 02 box mounting receptacle............... 15 06 (3116) 06 straight plug..................... 16 07 (3114) 07 jam nut receptacle.................. 17 0, 0 90 degree plug....................... 1 onnectors with rinted ircuit oard ontacts - box mount receptacle, jam nut receptacle................. 19, thru bulkhead receptacle..................... 20 eneral Information, pecifications - hermetic.............. 21 I (3113) hermetic solder mounting receptacle........... 22 02 hermetic box mounting receptacle.................. 23 07 (3114) hermetic jam nut receptacle............... 24,, / how to order......................... 25 -, -, /- roprietary/i--2642, eries 1 ayonet oupling, rimp ontacts eneral Information, pecifications, ervice lass........... 26, 27 00 (3120), 00 wall mounting receptacle........... 2 00 (312) wall mounting receptacle................ 29 01 (3121) 01 cable connecting receptacle.......... 30 02 (3122) 02 box mounting receptacle........... 31 02 (3127) box mounting receptacle................ 32 06 (3126), 06 straight plug.................. 33 07 (3124) 07 jam nut receptacle............... 34 0, 0 90 degree plug...................... 35 -, -, /- how to order................... 36 ccessories.................................. 37-40 lands...................................... 41 pplication tools.................................. 42 ontacts, ower and hermocouple rimp.................... 43 ontacts, hielded oax........................... 44-4 ounting ecommendations........................... 49 Other mphenol iniature ylindrical onnectors................ 50 roprietary/i--2642 eries 1 connectors covered in this catalog are widely used in gen eral duty and environmental applications, both industrial and military. arkets that use this family of connectors include: Instrumentation onitoring quipment achine ool, actory utomation ommunications eophysical Industrial ontrols and obotics Oil and etrochemical Industries ail/ass ransit ilitary/erospace If more information is needed concerning the con nectors covered in this publication, or if there are special application needs, please contact: mphenol orporation mphenol Industrial Operations 191 elaware venue idney, ew York 133-1395 elephone: -364-9011 ax: 520-397-7169 lease go to the mphenol websites to view, download and save this catalog and most all of mphenol interconnection product literature. www.amphenol-industrial.com ome miniature connector styles are available in o ompliant versions. lease contact mphenol Industrial Operations for more information. mphenol operates Quality ystems that are cer tified to IO9001: 200 by third party registrars. O: he connector products in this brochure were formerly known as endix products. hese products are now manufactured and sold under the mphenol brand name. he name mphenol will replace the name endix on products and literature in the future. O: he iniature I--2642, eries 2 connectors - and /- (formerly in this catalog) are no longer supplied with these designations. mphenol now supplies the mphenol /atrix I--2642, eries 2. (ilitary numbers include 3470-3472, 3474, - 3476).
mphenol iniature ylindrical onnectors roprietary/i--2642, eries 1 mphenol iniature ylindrical connectors offer twice the number of contacts in just half the size of a tandard connector. hese miniature connectors, are available in several series, each with varying design characteristics and customer options to meet cost con siderations and provide maximum design flexibility. here are two styles within the family that are approved and qualified to I--2642, eries 1, and in addition there are several proprietary styles. ommon features of all styles: ll are for general duty applications and environmental sealing is achieved with the grommet and clamp design. Operating temperature is from 55 to +125 ; Operating voltage to 1000 () at sea level. in and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an indefinite shelf life. ll have resilient inserts which provide high dielectric strength and moisture barrier. variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles. ayonet oupling with older ontact ermination older jam nut receptacle and mated straight plug, / (solder) and proprietary versions actory installed solder contacts 3 point bayonet coupling and 5 key/keyway mating. Intermateable with all miniature series connectors. / meets I--2642 eries 1, service classes, and. / is recognized. (solder) eries is a modification of the with same features except a wider flange for back panel mounting Options 7 shell styles with 60 insert patterns ermetic seal (glass fusion) recepta cle styles available ressurized thru bulkhead recepta cle style available re-installed coax solder contacts are available rinted circuit board contacts are available older wall mount receptacle - rimp wall mount receptacle and mated straight plug ayonet oupling with rimp ontact ermination -, /- (crimp) and proprietary versions rimp rear insertable/front release contact termination. (closed entry socket insert prevents probe damage). 3 point bayonet coupling and 5 key/keyway mating. Intermateable with all miniature series connectors. /- meets I--2642 eries 1, service classes,,. - (crimp) odification of the - with wider flange for back panel mounting Options 6 shell styles with 47 insert patterns oax and thermocouple contacts are available 1
mphenol iniature ylindrical design flexibility he large family of miniature proprietary and style connectors provides for many optional features and designs. In addition to the choices of bayonet or threaded shells, solder or crimp termination within the style variations, there are additional options that are shown here. ermetics ermetically sealed receptacles have fused compression glass sealed inserts which provide envionrmental moisture sealing. here are three hermetic styles within the bayonet series. oaxial ontacts mphenol iniature connectors can incorporate shielded coax contacts. ize and 12 crimp coax contacts are available in -, -, /-. actory installed size and 12 solder type coax contacts are available in,,/ connectors. ee coax contact information pages at the end of this catalog. onnector with ermetic eal Insert and oax ontacts onnector with ail ontacts rinted ircuit oard ail ontacts bayonet connectors in box mounting receptacle and jam nut receptacle styles are avail able with printed circuit board contacts. tandard tails for I--2642 connectors have gold plating,.0050 inches over nickel. ee page 20 and call mphenol for further infor mation. lex ircuitry lex termination assemblies for attaching cylindrical connectors to printed circuit boards are available through the mphenol division, dvanced ircuit echnology. lex can be used with miniature 2642 connectors and it can be designed to meet specific length, current carrying capacity and to fit the precise geometric shape of the connector to board package. lex circuity plugs into a printed circuit board and creates a self-locking terminal pad which eliminates the need for an additional interconnect to the. ilter rotection mphenol offers the eries which combines the miniature series with an I filter. esigned to provide I protection for sensitive circuits, each circuit is individually filtered within the con nector, eliminating the need for costly and bulky exterior network filters. ilter contacts are available in,,, and ranges and are intermateable and intermountable with I--2642 con nectors. or further information see catalog 12-120, mphenol I ilter ransient rotection onnectors. onnector with lex onnector with I ilter rotection Overmolded able Overmold seals and cables can be designed for almost any industrial application. variety of materials are available: neoprene, hypalon and others; and a variety of lengths can be designed to meet customer specifications. Overmold seals to the rear of the connector and to the cable jacket providing moisture sealing. onnector with Overmolded able 2
mphenol iniature ylindrical connector selection guide he accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to meet the application requirements. urther information can be found in specific sections of this catalog. II older / / - rimp Intermateable o o o o o ontacts older rimp I/ - ontact etention ystem on-emovable emovable oupling ayonet tandard inishes Olive rab admium (003) nodic oated (005) emperature ange esilient ielectric ( 55 to +125 ) Wide ounting lange ermetic eal Y IIIY Wall ounting eceptacle 00 ** able onnecting eceptacle 01 *** ox ounting eceptacle 02 * ** traight lug 06 am ut eceptacle 07 * * hru-bulkhead eceptacle older ount eceptacle I * * 90 lug 0 I/ = ear Insertion/ront eleasable o intermates with o Optional finishes available. ee how to order sections. * vailable in hermetic version ** ual mounting holes *** his connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. 3
mphenol iniature ylindrical insert availability Insert rrangement older ermination / ermetic - rimp ermination /- - - otal ontacts 20 16 12 ontact ize oax 12 6-1 * 1 1 I -2 2 2 I -3 3 3 I -4 4 4 I -33 3 3 I -9 3 3 I 10-2 2 2 I 10-5 * 5 5 I 10-6 6 6 I ervice ating 10-70 1 1 oax 10-9 * 6 6 I 12-3 3 3 II 12-4 * 4 4 I 12- * I 12-10 10 10 I 12-14 14 14 I 12-9 10 10 I 14-2 2 2 II 14-4 4 4 I 14-5 5 5 II 14-6 2 I 14-12 12 4 I 14-15 15 14 1 I 14-1 * 1 1 I 14-19 19 19 I 14-22 * 5 1 4 I 14-71 4 3 1 I 14-91 * 3 3 ** 14-4 4 I 16- II 16-23 23 22 1 I 16-26 26 26 I 16-70 15 14 1 / 16-76 * 14 1 5 *** 16-99 23 21 2 I 1-5 * 5 5 II 1- I 1-11 11 11 II 1-30 * 30 29 1 I *ot available in version **lashover voltage 5,000 () ***1500 () designates ocket insert only. designates in insert only. ize 12 contacts for #10 wire ot presently tooled ontacts must be ordered separately 4
mphenol iniature ylindrical insert availability, cont. Insert rrangement older ermination / *ot available in version **lashover voltage 5,000 () ***1500 () ermetic - rimp ermination /- - - otal ontacts 20 16 12 ontact ize oax 12 1-32 32 32 I ervice ating 1-71 * 9 1 oax, II 1-72 14 10 4 / 1-75 4 4 oax 1-76 4 3 1 II 1-0 6 2 oax, I 1-91 * 6 6 ** 20-16 16 16 II 20-24 24 24 I 20-25 25 25 I 20-26 26 20 6 I 20-27 27 27 I 20-39 39 37 2 I 20-41 41 41 I 20-70 14 10 4 oax 20-90 7 7 i-oltage 22-7 * 7 7 oax 22-21 21 21 II 22-25 * 25 25 I 22-32 32 32 I 22-34 34 34 I 22-36 36 36 I 22-41 41 27 14 I 22-55 55 55 I 22-70 19 13 6 I, oax 22-71 9 2 7 I, oax 22-72 19 12 4 3 / 22-7 * 7 7 oax 22-96 * 7 7 II 24-31 31 31 I 24-51 * 51 47 4 I 24-61 61 61 I 24-71 49 45 2 2 / 24-79 6 1 5 oax ize 12 contacts for #10 wire ot presently tooled ontacts must be ordered separately 5
mphenol iniature ylindrical alternate positioning lternate ositioning o avoid cross-plugging problems in applications requiring the use of more than one miniature cylindrical connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. s shown in the diagram at right, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. he socket insert would be rotated counterclockwise the same number of degrees in respect to the normal shell key. osition W osition osition Y osition iews looking into front face of pin insert or rear of socket insert. hell ize Insert rrangement Insert otation egrees W Y 6 6-1 -2* 5 122-3 60 210-4* 45 97 14-33* 90-9 10 10-2 45 90 315 10 10-5* 45 151 10 270 10 10-6* 90 10 10-70 10 10-9* 90 10 240 270 12 12-3* 10 12 12-4* 3 12 12-90 112 203 292 12 12-10* 60 155 270 295 12 12-14 12 12-9* 61 135 19 340 14 14-2 5 122 14 14-4* 45 14 14-5* 40 92 14 273 14 14-4 162 19 312 14 14-12* 43 90 14 14-15* 17 110 155 234 14 14-1* 15 90 10 270 14 14-19* 30 165 315 14 14-22 45 14 14-71 14 14-91 60 14 14-* 45 16 16-* 54 152 10 331 16 16-23 15 270 16 16-26* 60 275 33 16 16-70 41 122 216 26 16 16-76 16 16-99* 66 156 223 340 1 1-5 55 97 263 315 1 1-10 hell ize Insert rrangement Insert otation egrees W Y 1 1-11* 62 119 241 340 1 1-30* 10 193 25 350 1 1-32* 5 13 222 265 1 1-71 1 10 127 215 1 1-72 53 102 213 293 1 1-75 45 1 1-76 1 1-0 45 90 135 160 1 1-91 90 10 240 270 20 20-16* 23 31 333 347 20 20-24 70 145 215 290 20 20-25 72 144 216 2 20 20-26 13 107 210 322 20 20-27 72 144 216 2 20 20-39* 63 144 252 333 20 20-41* 45 126 225 20 20-70 63 135 222 335 20 20-90 45 135 225 315 22 22-7 19 41 22 22-21* 16 135 175 349 22 22-25 60 125 211 336 22 22-32 72 145 215 2 22 22-34 62 142 21 29 22 22-36 72 144 216 2 22 22-41 39 135 264 22 22-55* 30 142 226 314 22 22-70 30 2 21 312 22 22-71 33 191 236 270 22 22-72 42 200 277 339 22 22-7 19 41 22 22-96* 19 41 24 24-31 90 225 255 24 24-51 22 171 313 24 24-61* 90 10 270 324 24 24-71 39 131 205 21 24 24-79 * vailable in ermetic lass 6
7 mphenol iniature ylindrical insert arrangements front face of pin inserts illustrated Insert rrangement 6-1 -2-3 -4-33 -9 10-2 ervice ating I I I I I I I umber of ontacts 1 2 3 4 3 3 2 ontact ize 20 20 20 20 20 20 16 Insert rrangement 10-5 10-6 10-70 10-9 12-3 12-4 12- ervice ating I I oax I II I I umber of ontacts 5 6 1 6 3 4 ontact ize 20 20 oax 20 16 16 20 Insert rrangement 12-10 12-14 12-9 14-2 14-4 14-5 14- ervice ating I I I II I II I umber of ontacts 10 14 10 2 4 5 6 2 ontact ize 20 20 20 12 12 16 20 12 Insert rrangement 14-12 14-15 14-1 14-19 14-22 14-71 14-91 ervice ating I I I I I I umber of ontacts 4 14 1 1 19 1 4 3 1 3 ontact ize 20 16 20 16 20 20 20 12 16 oax 20 lashover 5,000 ()
mphenol iniature ylindrical insert arrangements Insert rrangement 1-75 1-76 1-0 1-91 ervice ating oax II I, oax umber of ontacts 4 3 1 6 2 6 ontact ize oax 12 oax oax 20 oax 20 Y W Y W a b c Y W Y W a b c d e f g Y W a b c d e f g h j front face of pin inserts illustrated Insert rrangement 14-16- 16-23 16-26 16-70 ervice ating I II I I / umber of ontacts 4 22 1 26 14 1 ontact ize 12 16 20 16 20 20 12 oax Insert rrangement 16-76 16-99 1-5 1-1-11 ervice ating I II I II umber of ontacts 1 5 21 2 5 11 ontact ize 20 12* 2 oax* 20 16 12 12 16 Insert rrangement 1-30 1-32 1-71 1-72 ervice ating I I II, oax / umber of ontacts 29 1 32 1 10 4 ontact ize 20 16 20 16 oax 20 12 oax lashover 1.500 () *ontact ositions Optional lashover 5,000 ()
9 mphenol iniature ylindrical insert arrangements Y W a Y W a b Y W a b c d Y W a r p n m k j h g f e d c b i q Y W a t s r p q n m k j i h g f e d c b W Y W a b b a h c j g d Y W f e front face of pin inserts illustrated Insert rrangement 20-16 20-24 20-25 20-26 ervice ating II I I I umber of ontacts 16 24 25 20 6 ontact ize 16 20 20 20 12 Insert rrangement 20-27 20-39 20-41 20-70 ervice ating I I I oax umber of ontacts 27 37 2 41 10 4 ontact ize 20 20 16 20 20 oax Insert rrangement 20-90 22-7 22-21 22-25 ervice ating i-oltage oax II I umber of ontacts 7 7 21 25 ontact ize 20 oax 16 16 Insert rrangement 22-32 22-34 22-36 22-41 ervice ating I I I I umber of ontacts 32 34 36 27 14 ontact ize 20 20 20 20 16 Y W a l k j h g f e d c b f W m h g e n l j d a c b Y k Y W a t s r q p n m k j i h g f e d c b W Y a b c
10 Y W a x w v u t s r q p n m y k j i h g f e d c b z W Q Y a g f e d c b Y W a z y x w v u t s r p n m q k j i h g f e d c b a e d f g i h j m p n q r b t y Y W z w k v x s u c front face of pin inserts illustrated Insert rrangement 22-55 22-70 22-71 22-72 ervice ating I I, oax I, oax / umber of ontacts 55 13 6 2 7 12 4 3 ontact ize 20 20 oax 20 oax 20 16 oax Insert rrangement 22-7 22-96 24-31 24-51 ervice ating oax II I I umber of ontacts 7 7 31 47 4 ontact ize oax 12 for 16 20 12 oax # 10 wire Insert rrangement 24-61 24-71 24-79 ervice ating I / oax umber of ontacts 61 45 2 2 1 5 ontact ize 20 20 16 oax 20 oax i j W Y a b d e f h m n p q r y t g u c v z s x k w mphenol iniature ylindrical insert arrangements ontact egend ymbol ontact ize 20 16 12 12 oax oax
mphenol,, / roprietary/i--2642, eries 1 bayonet coupling and solder termination wall mounting receptacle cable connecting receptacle* box mounting receptacle mphenol solder contact miniature cylindrical connectors meet the most critical application needs. esign versatility combined with high reliability performance makes these series of iniature ylindrical onnectors ideal for environ mental sealing or pressurized applications. he / eries is qualified to I--2642, eries 1 and has all the outstanding design characteristics and quality of the eries. he eries is a modification of the, providing special shells with a wide mounting flange for back panel mounting. corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the and /. he is given a durable non-conductive hard anodic lumilite coating which provides abrasion protection and resis tance to corrosion. **W** 500 hour corrosion resistance, o compliant harsh environment conductive plating. ray inc over an lectroless ickel (ray ni) base, with a ight un etal ray appearance. hell components for these series are aluminum. he dependable 5 key/keyway polarization with bayonet lock coupling assures pos itive mating with no chance of cross plugging. pring tension pro vided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. oth the insert and main joint gasket are molded from resilient neoprene. his provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. straight plug jam nut receptacle oth pins and sockets are machined from a copper alloy and are gold plated. his gold plating eliminates contact corrosion and offers an indefinite shelf life. ocket contacts for these series are a closed entry design. breakaway style plug is available in the solder series. ermetics receptacles are available in and / solder series. eceptacles with printed circuit board contacts are also available. older is recognized under file #115497, ol. 1, ec. 5. he, and / eries are intermateable and intermount able with all existing iniature ylindrical eries connectors. efer to pages 4-10 for insert arrangement availability.,, / thru bulkhead receptacle ontact ize ervice ating able 1: O /OO I est urrent ontact pecifications aximum illivolt rop older Well iameter older Well epth 20 7.5 55.046 +.004.125 +.031.000.000 16 13.0 50.07 +.005.1 +.031.003.000 +.004 +.031 12 23.0 42.116.1.002.000 ecommended Operating oltage at ea evel ervice ating ea evel est oltage (), 60 cps 50,000 ft. 70,000 ft. 110,000 ft. I 600 1,500 500 375 200 II 1,000 2,300 750 500 200 ilver plated wire per I- -2642 * his connector style is sometimes referred to as a cable connecting plug. It does, however, mate with a straight or 90 degree plug. 11
, ervice lasses and connectors are available in the service classes listed below. ach class, with the exception of hermetic, offers one or more means of terminating or supporting a cable or wire bundle. eneral duty; back shell is threaded for conduit attachment of 3057 cable clamp () eneral duty, with strain relief clamp for cable or wire bundle support ressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a tempera ture range of 65 to +257 nvironmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires () nvironmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support ranslucent nylon boot for retaining customer-applied potting compounds; held in place by a threaded ring () train relief clamp suitable for retaining customer applied potting compounds, with provision for wire support * ompressing cable gland for moisture proofing jacketed cables. ermetically sealed with compression glass inserts (see pages 22-25) tyle with printed circuit board contacts- see page 20. general duty (), / strain relief, / open wire seal / ervice lasses he / iniature connector is available in the fol lowing certified service classes: nvironmental resistant connectors - supplied with a multi-holed grommet and clamping nut for moisture-proofing individual open wires rommet seal with strain relief clamp ompressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cable and strain relief. elescoping sleeves ( 3420) can be used to adapt to cables smaller than minimum close-down. ranslucent nylon boot for retaining customer-applied potting compounds; held in place by a threaded ring, / potting boot cable gland seal 12
00 (3110) 00 wall mounting receptacle ().120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. Q () 4 oles able land eal eneral uty/ ressurized IIO I (), (), (), Open Wire eal / train elief otting oot 00-- able eal.375 I 00-- 00-- 00-- 00-- () 00-- () 00-- () 00-- () 00-- () 00-- () 3110-- o complete part number see how to order on page 25. n () located within.0025 of () 00-- 00-- 3110-- 00-- 00-- 3110-- 3110-- eceptacle ront iew eceptacle ide iew lass, +.020 +.010 Q hell () +.001.010.000 hread hread ize.005 lass 2 in. lass 6.469.641.6.953.34.493.524.906.431.462.3125-32.46.43.175 1.553.462.3750-32.594.734.12 1.047.473.493.524.906.431.462.4375-2.46.43.297 1.553.590.5000-2 10.719.12.93 1.125.590.493.524.906.431.462.5625-24.46.43.421 1.553.717.6250-24 12.12.93 1.031 1.250.750.493.524.906.431.462.675-24.46.43.546 1.553.34.7500-20 14.906 1.031 1.125 1.344.75.493.524.906.431.462.125-20.46.43.663 1.553.970.750-20 16.969 1.125 1.219 1.43 1.000.493.524.906.431.462.9375-20.46.43.77 1.553 1.0 1.0000-20 1 1.062 1.203 1.312 1.516 1.125.493.524.906.431.462 1.0625-1.531.43.79 1.553 1.216 1.175-1 20 1.156 1.297 1.43 1.672 1.250.650.650 1.125.556.556 1.175-1.531.531 1.014 1.703 1.332 1.175-1 22 1.250 1.375 1.562 1.750 1.375.650.650 1.125.556.556 1.3125-1.531.531 1.134 1.703 1.460 1.4375-1 24 1.375 1.500 1.6 1.75 1.500.63.63 1.1.59.59 1.4375-1.49.49 1.259 1.765 1.55 1.4375-1 lass (), (), (), / lass, / lass, / lass lass hell ize hread in. in. losed ree hread 6 1.266.440.192 1.43.44 6-32.240.125.12 1.922.550 1.266.560.317 1.43.60.16.230.547 2.271 12x1.5-6.936 10 6-32.302.1.75 1.922.675 1.266.65.434 1.43.734.205.312.675 2.271 16x1.5-6.936 12 6-32.42.312 1.000 1.922.03 1.266.13.54 1.43.5.33.442.12 2.411 16x1.5-6.936 14 6-32.552.375 1.125 1.922.920 1.266.930.673 1.43.94.416.539.940 2.599 1x1.5-6.936 16 6-32.615.500 1.1 2.047 1.047 1.266 1.057.79 1.43 1.110.550.616 1.067 2.943 22x1.5-6.936 1-32.740.625 1.43 2.07 1.165 1.266 1.175.99 1.43 1.234.600.672 1.194 3.172 25x1.5-6.936 20-32.740.625 1.43 2.344 1.290 1.516 1.301 1.024 1.656 1.360.635.747 1.322 3.610 25x1.5-6 1.10 22-32.92.750 1.625 2.344 1.41 1.516 1.430 1.149 1.656 1.44.670.46 1.449 3.766 32x1.5-6 1.10 24-32.990.00 1.719 2.406 1.543 1.57 1.555 1.274 1.717 1.610.740.94 1.576 3.95 32x1.5-6 1.10 ll dimensions for reference only. 13
01 (3111) cable connecting receptacle Q Y able land eal eneral uty IIO I (), (), (), Open Wire eal / train elief otting oot 01-- able eal.375 I 01-- 01-- () 01-- () 01-- () 3111-- 01-- 3111-- 01-- 3111-- / ec. 21 2015, 2:09:12 ote: his connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. o complete part number see how to order on page 25. 3111-- ecept. ront iew eceptacle ide iew lass, ±.020 Y ±.020 +.001.005 +.020.010 +.016.000 Q hread lass 2 in. hread lass hell ize 6.6.12.34.494.906.400.3125-32.94.175 1.553.462.3750-32.12.93.473.494.906.400.4375-2.94.297 1.553.590.5000-2 10.93 1.062.590.494.906.400.5625-24.94.421 1.553.717.6250-24 12 1.031 1.156.750.494.906.400.675-24.94.546 1.553.34.7500-20 14 1.125 1.250.75.494.906.400.125-20.94.663 1.553.970.750-20 16 1.219 1.344 1.000.494.906.400.9375-20.94.77 1.553 1.0 1.0000-20 1 1.312 1.43 1.125.494.906.400 1.0625-1.94.79 1.553 1.216 1.175-1 20 1.43 1.562 1.250.650 1.125.535 1.175-1 1.166 1.041 1.703 1.332 1.175-1 22 1.562 1.6 1.375.650 1.125.535 1.3125-1 1.166 1.135 1.703 1.460 1.4375-1 24 1.6 1.12 1.500.63 1.1.56 1.4375-1 1.166 1.259 1.765 1.55 1.4375-1 lass (), (), (), / lass, / lass, / lass lass hell ize hread in. in. losed ree hread 6 1.266.440.192 1.43.44 6-32.240.125.12 1.922.550 1.266.560.317 1.43.60.16.230.547 2.271 12x1.5-6.936 10 6-32.302.1.75 1.922.675 1.266.65.434 1.43.734.205.312.675 2.271 16x1.5-6.936 12 6-32.42.312 1.000 1.922.03 1.266.13.54 1.43.5.33.442.12 2.411 16x1.5-6.936 14 6-32.552.375 1.125 1.922.920 1.266.930.673 1.43.94.416.539.940 2.599 1x1.5-6.936 16 6-32.615.500 1.1 2.047 1.047 1.266 1.057.79 1.43 1.110.550.616 1.067 2.943 22x1.5-6.936 1-32.740.625 1.43 2.07 1.165 1.266 1.175.99 1.43 1.234.600.672 1.194 3.172 25x1.5-6.936 20-32.740.625 1.43 2.344 1.290 1.516 1.301 1.024 1.656 1.360.635.747 1.322 3.610 25x1.5-6 1.10 22-32.92.750 1.625 2.344 1.41 1.516 1.430 1.149 1.656 1.44.670.46 1.449 3.766 32x1.5-6 1.10 24-32.990.00 1.719 2.406 1.543 1.57 1.555 1.274 1.717 1.610.740.94 1.576 3.95 32x1.5-6 1.10 ll dimensions for reference only. 14
02 (3112) 02 box mounting receptacle () ().120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. 4 oles 02-- 02-- * 02-- * 02-- * 02-- * 02-- 3112-- * 02-- * 02-- 3112-- o complete part number see how to order on page 25. n () located within.0025 of () * he 02 and 02 box mounting receptacles are made only to complete a series; no provision is made for accessories or potting on the rear skirt. hell ize eceptacle ront iew eceptacle ide iew +.020 +.010 ().010.000 +.001 ia..005 6.469.641.6.953.34.493.524.25.431.462.323.465.43.594.734.12 1.047.473.493.524.25.431.462.449.465.43 10.719.12.93 1.125.590.493.524.25.431.462.573.465.43 12.12.93 1.031 1.250.750.493.524.25.431.462.699.465.43 14.906 1.031 1.125 1.344.75.493.524.25.431.462.23.465.43 16.969 1.125 1.219 1.43 1.000.493.524.25.431.462.949.465.43 1 1.062 1.203 1.312 1.516 1.125.493.524.25.431.462 1.073.465.43 20 1.156 1.297 1.43 1.672 1.250.650.650 1.076.556.556 1.199.526.531 22 1.250 1.375 1.562 1.750 1.375.650.650 1.076.556.556 1.323.526.531 24 1.375 1.500 1.6 1.75 1.500.63.63 1.109.59.59 1.449.493.497 ll dimensions for reference only. 15
06 (3116) 06 straight plug Q able land eal eneral uty IIO I (), (), (), Open Wire eal / train elief otting oot.375 I 06-- 06-- 06-- 06-- () 06-- () 06-- () 06-- () 06-- () 06-- () 06-- () 06-- () 06-- () 3116-- o complete part number see how to order on page 25. 06-- 06-- 06-- 3116-- 06-- 06-- 06-- 3116-- 06-- 06-- 06-- able eal 3116-- lug ront iew lug ide iew lass hell ize Q hread lass 2 in. hread lass 6.625.353.906.3125-32.594.175 1.609.462.3750-32.750.353.906.4375-2.594.297 1.609.590.5000-2 10.59.353.906.5625-24.594.421 1.609.717.6250-24 12 1.013.353.906.675-24.594.546 1.609.34.7500-20 14 1.156.353.906.125-20.594.663 1.609.970.750-20 16 1.21.353.906.9375-20.594.77 1.609 1.0 1.0000-20 1 1.319.353.906 1.0625-1.594.79 1.609 1.216 1.175-1 20 1.531.415 1.062 1.175-1.672 1.014 1.656 1.332 1.175-1 22 1.656.415 1.062 1.3125-1.672 1.135 1.656 1.460 1.4375-1 24* 1.776.415 1.125 1.4375-1.672 1.259 1.750 1.57 1.4375-1 lass (), (), (), / lass, / lass, / lass lass hell ize hread in. in. losed ree hread 6 1.266.440.192 1.43.44 6-32.240.125.12 1.922.550 1.266.560.317 1.43.60.16.230.547 2.271 12x1.5-6.936 10 6-32.302.1.75 1.922.675 1.266.65.434 1.43.734.205.312.675 2.271 16x1.5-6.936 12 6-32.42.312 1.000 1.922.03 1.266.13.54 1.43.5.33.442.12 2.411 16x1.5-6.936 14 6-32.552.375 1.125 1.922.920 1.266.930.673 1.43.94.416.539.940 2.599 1x1.5-6.936 16 6-32.615.500 1.1 2.047 1.047 1.266 1.057.79 1.43 1.110.550.616 1.067 2.943 22x1.5-6.936 1-32.740.625 1.43 2.07 1.165 1.266 1.175.99 1.43 1.234.600.672 1.194 3.172 25x1.5-6.936 20-32.740.625 1.43 2.344 1.290 1.516 1.301 1.024 1.656 1.360.635.747 1.322 3.610 25x1.5-6 1.10 22-32.92.750 1.625 2.344 1.41 1.516 1.430 1.149 1.656 1.44.670.46 1.449 3.766 32x1.5-6 1.10 24-32.990.00 1.719 2.406 1.543 1.57 1.555 1.274 1.717 1.610.740.94 1.576 3.95 32x1.5-6 1.10 ll dimensions for reference only. 16
07 (3114) 07 jam nut receptacle eneral uty/ ressurized eceptacle 07-- 07-- Open Wire eal IIO I (), (), (), / train elief otting oot 07-- 07-- 3114-- o complete part number see how to order on page 25. 07-- () 07-- () 07-- () 3114-- 07-- 3114-- ecept. ront iew eceptacle ide iew lass, / ia. lat anel hickness hell ize ±.016 +.001.005 +.000.010 +.011.010 in. hread lass 2 ±.040 6.625.12.34.405.125.696.062.125.4375-2.231.56.696.604.191.750.93.473.530.125.696.062.125.5625-24.231.56.696.729.191 10.75 1.062.590.655.125.696.062.125.675-24.231.56.696.54.191 12 1.062 1.250.750.1.125.696.062.125.750-20.231.56.696.979.191 14 1.1 1.375.75.942.125.696.062.125 1.0000-20.231.56.696 1.104.191 16 1.312 1.500 1.000 1.066.125.696.062.125 1.1250-1.231.56.696 1.229.191 1 1.43 1.625 1.125 1.191.125.696.062.125 1.2500-1.231.56.696 1.354.191 20 1.562 1.12 1.250 1.316.156.4.062.250 1.3750-1.261.630.4 1.510.221 22 1.6 1.93 1.375 1.441.156.4.062.250 1.5000-1.261.630.4 1.635.221 24 1.16 2.062 1.500 1.566.156.917.062.250 1.6250-1.22.660.917 1.760.1 lass (), (), / lass () lass, / hell ize hread hread +.010.026 6.202.593.696.44.191 6-32.250.125.71 1.062.696 6-32.250.125.775 1.029.696.327.593.696.60.191 10 6-32.312.1.44 1.062.696 6-32.312.1.37 1.029.696.444.593.696.734.191 12 6-32.43.312.969 1.062.696 6-32.43.312.963 1.029.696.55.593.696.5.191 14 6-32.562.375 1.094 1.062.696 6-32.562.375 1.07 1.029.696.63.593.696.94.191 16 6-32.625.500 1.156 1.1.696 6-32.625.500 1.150 1.161.696.0.593.696 1.110.191 1-32.750.625 1.406 1.1.696-32.750.625 1.400 1.161.696.909.593.696 1.234.191 20-32.750.625 1.406 1.250.4-32.750.625 1.400 1.224.4 1.034.71.4 1.360.221 22-32.93.750 1.594 1.250.4-32.93.750 1.57 1.224.4 1.159.71.4 1.44.221 24* -32 1.000.00 1.594 1.250.917-32 1.000.00 1.61 1.320.917 1.24.71.917 1.610.1 * ize 24 strain relief available in only. ll dimensions for reference only. 17
0 0 90 degree plug IIO I Open Wire eal, () train elief otting oot 75 degrees 0-- 0-- 0-- () 0-- () 0-- 0-- o complete part number see how to order on page 25. ll lockwire holes are.044 ia. in. hell ize lug ront iew ia. ±.031 +.010.025 lass, () ±.062 +.047.025 lug ide iew ±.057 ±.025 ±.015 lass ±.015.796.655.169.941.339 1.76.469.312.43 1.656 10.921.749.170 1.191.393 1.0.547.43.562 1.71 12 1.046.12.264 1.191.450 1.965.625.516.6 1.43 14 1.171.905.310 1.254.519 2.113.734.625.71 1.953 16 1.297 1.030.330 1.316.53 2.315.750.656.90 2.000 1 1.422 1.015.444 1.562.621 2.423.71.703 1.000 2.046 20 1.562 1.077.510 1.625.63 2.695.59.766 1.125 2.21 22 1.672 1.139.515 1.719.739 2.742.906.12 1.234 2.265 24 1.797 1.265.656 1.751.797 2.90 1.169.91 1.374 2.624 ll dimensions for reference only. 1
onnectors with rinted ircuit oard ontacts ox ounting eceptacle (02) with ontacts Order by applicable part number in chart below; add insert arrangement number. efer to insert availability on pages 4-10. n () located within.0025 of () () () 4 O.120 ±.005 ia. (.147 ±.005 ia., size 24).030 ±.001 hell ize art umber* 02 with ontacts eceptacle ront iew () +.011.010 +.001.005 +.021.010 eceptacle ide iew +.010.000 6 71-570120-.469.6.34.493.25.431.323.30 71-570121-.594.12.473.493.25.431.449.30 10 71-570122-.719.93.590.493.25.431.573.30 12 71-570123-.12 1.031.750.493.25.431.699.30 14 71-570124-.906 1.125.75.493.25.431.23.30 16 71-570125-.969 1.219 1.000.493.25.431.949.30 1 71-570126- 1.062 1.312 1.125.493.25.431 1.073.30 20 71-570127- 1.156 1.43 1.250.650 1.076.556 1.199.26 22 71-57012- 1.250 1.562 1.375.650 1.076.556 1.323.26 24 71-570129- 1.375 1.6 1.500.63 1.109.59 1.449.253 ll dimensions for reference only. ia. +.040.050 am ut eceptacle (07) with ontacts ll lockwire holes are.044 ia. in. Order by applicable part number in chart below; add insert arrangement number. efer to insert availability on pages 4-10..030 ±.001 hell ize art umber* 07 with ontacts eceptacle ront iew +.017.016 ±.010 ia. +.001.005 lat +.000.010 +.011.010 eceptacle ide iew ±.010 anel hickness in. hread lass 2 6 71-533720-.625.12.34.405.125.696.062.125.4375-2.376 71-533721-.750.93.473.530.125.696.062.125.5625-24.376 10 71-533722-.75 1.062.590.655.125.696.062.125.675-24.376 12 71-533723- 1.062 1.250.750.1.125.696.062.125.750-20.376 14 71-533724- 1.1 1.375.75.942.125.696.062.125 1.0000-20.376 16 71-533725- 1.312 1.500 1.000 1.066.125.696.062.125 1.1250-1.376 1 71-533726- 1.43 1.625 1.125 1.191.125.696.062.125 1.2500-1.376 20 71-533727- 1.562 1.12 1.250 1.316.156.4.062.250 1.3750-1.367 22 71-53372- 1.6 1.93 1.375 1.441.156.4.062.250 1.5000-1.367 24 71-533729- 1.16 2.062 1.500 1.566.156.917.062.250 1.6250-1.334 ll dimensions for reference only. +.025.035 * or o compliance connectors with contacts change 71 - to: designates conductive gray zinc nickel plating 93 designates black zinc cobalt plating 19
thru bulkhead receptacle () ().120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. 4 oles * -- * -- * o complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add ; xample: -1-32. If a rotation is required, use -1-32 and add W,, Y or. xample: -1-32 W. he socket end of the insert always appears at the dimension end of shell. n () located within.0025 of () hell ize eceptacle ront iew eceptacle ide iew () +.001 +.016 +.010.005.000 ±.005.000 6.469.641.6.953.34.625 1.050.562.125.1.594.734.12 1.047.473.625 1.050.562.125.1 10.719.12.93 1.125.590.625 1.050.562.125.1 12.12.93 1.031 1.250.750.625 1.050.562.125.1 14.906 1.031 1.125 1.344.75.625 1.050.562.125.1 16.969 1.125 1.219 1.43 1.000.625 1.050.562.125.1 1 1.062 1.203 1.312 1.516 1.125.625 1.050.562.125.1 20 1.156 1.297 1.43 1.672 1.250.71 1.330.6.125.312 22 1.250 1.375 1.562 1.750 1.375.71 1.330.6.125.312 24 1.375 1.500 1.6 1.75 1.500.71 1.330.6.125.312 ll dimensions for reference only. 20
hermetic hree shell styles are available in the hermetic bayonet series: I (3113) 02 07 (3114) solder mounting receptacle box mounting receptacle hese hermetic connectors are only available with solder cup or flat eyelet pin contacts in the / version. ocket contacts are available in some proprietary versions. Other design characteristics of the hermetic connector series are as fol lows: hell sizes: through 24 (tin plated) ontact count: 2 through 61. efer to pages 4 and 5 for insert availability for hermetics. urrent: 5.0 amp each #20 contact 10 amp each #16 contact 17 amp each #12 contact ontacts are tin plated for ; gold is optional ielectric Withstanding oltage (sea level): 1500 volts () 60 cps, ervice ating I 2300 volts () 60 cps, ervice ating II ompression glass inserts, permanently lettered elium eakage: ess than 1.0 10-6 cc/sec. at 15 psi differential hysical hock: 100 s ibration: hermal hock: xceeds I--5272 rocedure II o deterioration or failure after 5 cycles at 55 to +257 Intermateability: ates with 3116 and 06 efer to pages 4-10 for insert arrangement availability. jam nut receptacle 21
I (3113) hermetic solder mounting receptacle W.031 +.006.005 * I-- ** IY-- ** 3113- I-- (100) IY-- (100) 3113-Y o complete part number see how to order on page 25. * older cup pin contacts without interfacial seal ** older cup pin contacts with interfacial seal lat eyelet pin contacts without interfacial seal lat eyelet pin contacts with interfacial seal hell ize ecept. ront iew ia. ia. +.001.005 +.025.016 eceptacle ide iew ia. +.001.005 W +.011.010 6.511.34.447.43.094.36.636.473.447.562.094.36 10.761.590.447.672.094.36 12.55.750.447.71.094.36 14.90.75.447.906.094.36 16 1.105 1.000.447 1.031.094.36 1 1.229 1.125.447 1.156.094.36 20 1.323 1.250.509 1.250.094.36 22 1.449 1.375.509 1.375.125.41 24 1.574 1.500.542 1.500.125.41 ll dimensions for reference only. 22
02 hermetic box mounting receptacle ().120 ±.005 ia. (.147 ±.005 ia., size 24).150 ±.005 ia. W () 4 oles * 02-- ** 02Y-- 02-- (100) 02Y-- (100) o complete part number see how to order on page 25. * older cup pin contacts without interfacial seal ** older cup pin contacts with interfacial seal lat eyelet pin contacts without interfacial seal lat eyelet pin contacts with interfacial seal n () located within.0025 of () hell ize eceptacle ront iew () ±.016 ia. +.001.005 ±.015 eceptacle ide iew +.025.015 ia. +.001.005 +.011.010 6.469.6.34.047.494.43.062.344.594.12.473.047.494.562.062.344 10.719.93.590.047.494.672.062.344 12.12 1.031.750.047.494.71.062.344 14.906 1.125.75.047.494.906.062.344 16.969 1.219 1.000.047.494 1.031.062.344 1 1.062 1.312 1.125.047.494 1.156.062.344 20 1.156 1.43 1.250.047.556 1.250.062.344 22 1.250 1.562 1.375.079.556 1.375.062.377 24 1.375 1.6 1.500.079.5 1.500.062.377 ll dimensions for reference only. 23
07 (3114) hermetic jam nut receptacle * 07-- ** 07Y-- ** 3114-07-- (100) 07Y-- (100) 3114-Y o complete part number see how to order on page 25. * older cup pin contacts without interfacial seal ** older cup pin contacts with interfacial seal lat eyelet pin contacts without interfacial seal lat eyelet pin contacts with interfacial seal hell ize eceptacle ront iew +.016 ex +.017.016 +.001.005 +.043.016 +.031.000 eceptacle ide iew anel hickness in. hread lass 2 6.12.625.34.094.696.125.062.4375-2.206.93.750.473.094.696.125.062.5625-24.206 10 1.062.75.590.094.696.125.062.675-24.206 12 1.250 1.062.750.094.696.125.062.750-20.206 14 1.375 1.1.75.094.696.125.062 1.0000-20.206 16 1.500 1.312 1.000.094.696.125.062 1.1250-1.206 1 1.625 1.43 1.125.094.696.125.062 1.2500-1.206 20 1.12 1.562 1.250.125.4.250.062 1.3750-1.01 22 1.93 1.6 1.375.125.4.250.062 1.5000-1.01 24 2.062 1.12 1.500.125.917.250.062 1.6250-1.04 ll dimensions for reference only. 24
,, / how to order, o more easily illustrate ordering procedure, part number 00-20-41W() is shown as follows: 00-20 - 41 W () 1 2 3 4 5 6 7 ee code below: 1. onnector ype designates standard olive drab, electrically conductive cadmium plate bayonet lock connector with solder contacts designates electrically non-conductive, hard anodic coated bayonet lock connector with solder contacts and larger flange and mounting holes for back panel mounting designates plug with grounding fingers 2. hell tyle 00 designates wall mounting receptacle 01 designates cable connecting receptacle** 02 designates box mounting receptacle 06 designates straight plug 07 designates jam nut receptacle 0 designates 90 degree plug cable support designates thru bulkhead receptacle (pressurized) I designates solder mount receptacle (ermetic only) 3. ervice lasses designates general duty back shell designates pressurized receptacle designates environmental resisting open wire seal with grommet and nut designates assembly with potting boot designates adapter for cable gland for moisture proofing jacketed cables designates hermetic* without interfacial seal Y designates hermetic* with interfacial seal 4. hell ize 20 designates shell size. hell sizes 6 through 24 available. 5. Insert rrangement - efer to pages 4-10 for insert availability. 20-41 designates insert arrangement. (he number following the hyphen is the number only that is used in the part number). 6. ontacts designates pin contacts designates socket contacts or ordering connectors with printed circuit board contacts, see pg. 19. 7. Insert otation - efer to page 6. W,, Y, designate that insert is rotated in its shell from normal position. o letter required for normal (no rotation) position.. designates a strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on ) (100) uffix added for flat eyelet pin contacts in hermetic versions O o ompliant finish suffix as follow: (005) anodic coating - lumilite (standard on ) (023) electroless nickel (025) black zinc cobalt plating (072) conductive gray zinc nickel plating (424) electroless nickel finish with strain relief (470) black zinc cobalt plating with strain relief / I--2642, eries 1 art number 311020-41W is shown as follows: 311 0 20-41 W 1 2 3 4 5 6 7 or ermetic connectors part number 311320Y- 41W is shown as follows: 311 3 20 Y 41 W 1 2 3 4 5, 6 7 ee code below: 1. designates ilitary tandard 2. pecification umber 311 designates basic family number for I--2642, eries 1 solder type 3. hell tyle 0 designates wall mounting receptacle 1 designates cable connecting receptacle** 2 designates box mounting receptacle 3 designates solder mount receptacle (hermetic only) 4 designates jam nut receptacle 6 designates straight plug 4. ervice lass designates environmental resisting connector designates environmental resisting connectors with strain relief designates clamp assembly for moisture proofing multi-jacketed cables, with strain relief designates potted type with potting boot designates hermetic 5. hell ize 20 designates shell size. hell sizes through 24 available. 6. Insert rrangement - efer to pages 4-10 for insert availability. 20-41 designates arrangement. (he number fol lowing the hyphen is the number only that is used in the part number). ermetic version 20Y41 designates insert arrangement; specify Y for flat eyelet pin contacts, or for solder cup pin contacts 7. ontact onfiguration designates pin contacts designates socket contacts. Insert otation- efer to page 6. W,, Y, designate that insert is rotated in it shell from normal position. o letter require fo nor mal (no rotation) position. * ermetic connectors are supplied with tin plated shells. ** his connector style is sometimes referred to as a cable connect ing plug. It does, however, mate with either a straight or 90 degree plug. 25
mphenol -, -, /- roprietary/i--2642, eries 1 bayonet coupling and crimp termination mphenol crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. hese crimp contacts are rear insertable/front release and are held in position by an approved spring tower retention system. wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle he /- eries is qualified to I--2642, eries 1 and has all the outstanding design characteristics and quality of the eries. he - eries is a modification of the -, providing special shells with a wide mounting flange for back panel mounting. corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the - and /-. he - is given a durable non-conductive hard anodic lumilite coating which provides abra sion protection and resistance to corrosion. **W** 500 hour corrosion resistance, o compliant harsh environment conductive plating. ray inc over an lectroless ickel (ray ni) base, with a ight un etal ray appearance. hell components for these series are aluminum. he dependable 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. pring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. oth the insert and main joint gasket are molded from resilient neoprene. his provides excellent moisture sealing at the gas ket and superior electrical isolation of the contact in the insert. oth pins and sockets are machined from a copper alloy and are gold plated. his gold plating eliminates contact corrosion and offers an indefinite shelf life. ocket contacts for these series are a closed entry design. reakaway style plug is available in - crimp. he -, - and /- eries are intermateable and intermountable with all existing iniature ylindrical eries connectors. efer to pages 4-10 for insert arrangement availability. * his connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. 26
-. -, /- ontact ize est urrent ontact pecifications aximum illivolt rop rimp Well iameter inimum Well epth 20 7.5 55.049 ±.001.267 16 13.0 49.067 ±.001.236 12 23.0 42.100 ±.002.236 ervice ating ecommended Operating oltage at ea evel ervice ating est oltage (), 60 cps ea evel 50,000 ft. 70,000 ft. 110,000 ft. I 600 1,500 500 375 200 II 1,000 2,300 750 500 200, / open wire seal ilver plated wire per I--2642 - and - ervice lasses - and - connectors are available in the three service classes listed below. Open wire sealing - environmental resistant, with a nut and grommet for moisture proofi ng individual wires () train relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support ranslucent nylon boot for retaining cus tomer applied potting compounds; held in place by a threaded ring (), / strain relief clamp /- ervice lasses - series connectors are available in the following certified service classes: Open wire sealing - environmental resisting connectors are supplied with a multi-hole grommet and clamping nut for moisture proofing individual open wires nvironmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support otting applications - these connectors are supplied with a translucent nylon boot for retention of customer applied potting compound, / potting boot 27
00 (3120) 00 wall mounting receptacle () ia. 4 oles () Open Wire eal IIO I (), / train elief otting oot 00-- 00-- 3120-- o complete part number see how to order on page 36. n () located within.005 of () 00-- () 00-- () 3120-- 00-- 00-- eceptacle ront iew eceptacle ide iew ia. ia. +.010 * hell () ±.005 +.001.000 anel hickness ize.005 ±.016.594.2.120.473.062.431.094 10.719.12.954 1.141.120.150.590.062.431.462.094.125 12.12.93 1.047 1.266.120.150.750.062.431.462.094.125 14.906 1.031 1.141 1.360.120.150.75.062.431.462.094.125 16.969 1.125 1.234 1.453.120.150 1.000.062.431.462.094.125 1 1.062 1.203 1.32 1.532.120.150 1.125.062.431.462.094.125 20 1.156 1.297 1.453 1.6.120.150 1.250.094.556.556.219.219 22 1.250 1.375 1.57 1.766.120.150 1.375.094.556.556.219.219 24 1.375 1.500 1.703 1.91.147.150 1.500.094.59.59.219.219 lass, / lass (), / lass, / hell ize ia. ax ia. ia. ia. 1.32.560.125 2.422.71 10 1.32.704.1 2.422.44.444 1.656.734 12 1.32.25.312 2.422.969.55 1.656.5 14 1.32.954.375 2.422 1.094.63 1.656.94 16 1.32 1.00.500 2.537 1.156.0 1.656 1.110 1 1.32 1.204.625 2.537 1.406.909 1.656 1.234 20 1.359 1.330.625 2.24 1.406 1.034 1.750 1.360 22 1.359 1.454.750 2.24 1.594 1.159 1.750 1.44 24 1.422 1.50.00 2.900 1.6 1.24 1.72 1.610 * ack panel mounting ll dimensions for reference only. 2
00 (312) wall mounting receptacle ¹ () () ¹ ia. 4 oles ¹ () () ia. 4 oles / Open Wire eal IIO I / train elief 00-- 312-- 00-- () 312-- o complete part number see how to order on page 36. n () located within.0025 of () hell ize eceptacle ront iew 1 ia. ±.005 1 ia. ±.005 ia. +.001.005 ±.016 +.010.000 eceptacle ide iew lass / in. lass / 10.719.12 1.141.120.150.590.062.462 1.32.65.297.1 1.906.91 12.12.93 1.266.120.150.750.062.462 1.32.13.422.312 1.906 1.016 14.906 1.031 1.360.120.150.75.062.462 1.32.930.547.375 1.906 1.141 16.969 1.125 1.453.120.150 1.000.062.462 1.32 1.057.609.500 2.000 1.203 1 1.062 1.203 1.532.120.150 1.125.062.462 1.32 1.175.734.625 2.000 1.469 20 1.156 1.297 1.6.120.150 1.250.094.556 1.359 1.301.734.625 2.172 1.469 22 1.250 1.375 1.766.120.150 1.375.094.556 1.359 1.42.922.750 2.172 1.656 24 1.375 1.500 1.91.147.150 1.500.094.59 1.422 1.533.94.00 2.234 1.750 ll dimensions for reference only. ia. 29
01 (3121) 01 cable connecting receptacle, / Open Wire eal IIO I (), / train elief, / otting oot 01-- 01-- 3121-- 01-- () 01-- () 3121-- ote: his connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. o complete part number see how to order on page 36. 01-- 01-- 3121-- hell ize eceptacle ront iew ia. +.001.005 eceptacle ide iew lass, / lass (), / lass, / ±.01 ia..12.473.094 1.522.560.125 2.422.2 10.955.590.094 1.522.65.1 2.422.91.444 1.656.734 12 1.04.750.094 1.522.13.312 2.422 1.016.55 1.656.5 14 1.142.75.094 1.522.930.375 2.422 1.141.63 1.656.94 16 1.236 1.000.094 1.522 1.057.500 2.537 1.203.0 1.656 1.110 1 1.329 1.125.094 1.522 1.175.625 2.537 1.469.909 1.656 1.234 20 1.455 1.250.115 1.709 1.301.625 2.24 1.469 1.034 1.750 1.360 22 1.579 1.375.115 1.709 1.42.750 2.24 1.656 1.159 1.750 1.44 24 1.709 1.500.115 1.709 1.555.00 2.900 1.750 1.24 1.72 1.610 ll dimensions for reference only. ia. ia. ia. 30
02 (3122) 02 box mounting receptacle () () ia. 4 oles 02-- 02-- 3122-- o complete part number see how to order on page 36. n () located within.0025 of () hell ize eceptacle ront iew eceptacle ide iew ia. +.010 ia. ±.005.000 +.001.005 ±.016.594.2.120.473.312.062 1.296.431.43 10.719.12.954 1.141.120.150.590.312.219.062 1.296.431.462.562 12.12.93 1.047 1.266.120.150.750.312.219.062 1.296.431.462.6 14.906 1.031 1.141 1.360.120.150.75.312.219.062 1.296.431.462.12 16.969 1.125 1.234 1.453.120.150 1.000.312.219.062 1.296.431.462.93 1 1.062 1.203 1.32 1.532.120.150 1.125.312.219.062 1.296.431.462 1.062 20 1.156 1.297 1.453 1.6.120.150 1.250.406.344.094 1.35.556.556 1.1 22 1.250 1.375 1.57 1.766.120.150 1.375.406.344.094 1.35.556.556 1.312 24 1.375 1.500 1.703 1.91.147.150 1.500.406.344.094 1.35.59.59 1.43 ll dimensions for reference only. ia. +.011.000 31
02 (3127) box mounting receptacle ¹ () () ¹ ia. 4 oles ¹ () () ia. 4 oles 02-- 3127-- o complete part number see how to order on page 36. n () located within.0025 of () hell ize eceptacle ront iew ia. +.011.000 1 ±.005 1 ±.005 ia. +.001.005 eceptacle ide iew ±.016 10.562.719.12 1.141.120.150.590.219.062 1.266.462 12.6.12.93 1.266.120.150.750.219.062 1.266.462 14.12.906 1.031 1.360.120.150.75.219.062 1.266.462 16.93.969 1.125 1.453.120.150 1.000.219.062 1.266.462 1 1.062 1.062 1.203 1.532.120.150 1.125.219.062 1.266.462 20 1.1 1.156 1.297 1.6.120.150 1.250.344.094 1.32.556 22 1.312 1.250 1.375 1.766.120.150 1.375.344.094 1.32.556 24 1.43 1.375 1.500 1.91.147.150 1.500.344.094 1.32.59 ll dimensions for reference only. +.010.000 32
06 (3126) 06 straight plug, / Open Wire eal IIO I (), / train elief, / otting oot pin contacts ¹ socket contacts pin contacts ¹ socket contacts pin contacts ¹ socket contacts 06-- 06-- 06-- 3126-- o complete part number see how to order on page 36. 06-- () 06-- () 06-- () 3126-- 06-- 06-- 06-- 3126-- hell ize lug ront iew ia. ±.045 1 ±.045 lug ide iew lass, / lass (), / lass, / *.734.640.579 1.32.540.125 2.413.2.327 1.750.57 10.59.640.579 1.32.65.1 2.413.91.444 1.750.734 12 1.031.640.579 1.32.13.312 2.413 1.016.55 1.750.5 14 1.156.640.579 1.32.930.375 2.413 1.141.63 1.750.94 16 1.21.640.579 1.32 1.057.500 2.52 1.203.0 1.750 1.110 1 1.391.640.579 1.32 1.175.625 2.52 1.469.909 1.750 1.234 20 1.531.640.579 1.297 1.301.625 2.753 1.469 1.034 1.750 1.360 22 1.656.640.579 1.297 1.42.750 2.753 1.656 1.159 1.750 1.44 24 1.777.640.579 1.359 1.533.00 2.30 1.750 1.24 1.766 1.610 * -, - and - only. ll dimensions for reference only. ia. ia. ia. 33
07 (3124) 07 jam nut receptacle, / Open Wire eal IIO I (), / train elief, / otting oot 07-- 07-- 3124-- o complete part number see how to order on page 36. ll lockwire holes are.044 ia. in. 07-- () 07-- () 3124-- 07-- 07-- 3124-- eceptacle ront iew eceptacle ide iew ia. lat hell ex +.001 +.000 +.011 anel hickness hread ize.005.010.010 ±.005 in. lass 2.767.954.473.530.125.696.062.125.5625-24 10.92 1.07.590.655.125.696.062.125.675-24 12 1.079 1.266.750.1.125.696.062.125.750-20 14 1.205 1.391.75.942.125.696.062.125 1.0000-20 16 1.329 1.516 1.000 1.066.125.696.062.125 1.1250-1 1 1.455 1.641 1.125 1.191.125.696.062.125 1.2500-1 20 1.579 1.2 1.250 1.316.156.4.062.250 1.3750-1 22 1.705 1.954 1.375 1.441.156.4.062.250 1.5000-1 24 1.29 2.07 1.500 1.566.156.917.062.250 1.6250-1 lass, / lass (), / lass, / hell ize in. ia. ree ia. ia. 1.43.749.234.125 1.922.2 10 1.43.74.297.1 1.922.91.444 1.656.734 12 1.43.999.422.312 1.922 1.016.55 1.656.5 14 1.43 1.124.547.375 1.922 1.141.63 1.656.94 16 1.43 1.249.609.500 2.000 1.203.0 1.656 1.110 1 1.43 1.374.734.625 2.000 1.469.909 1.656 1.234 20 1.625 1.530.734.625 2.172 1.469 1.034 1.922 1.360 22 1.625 1.655.922.750 2.172 1.656 1.159 1.922 1.44 24 1.6 1.70.94.00 2.234 1.750 1.24 1.951 1.610 ll dimensions for reference only. 34
0 0 90 degree plug IIO I Open Wire eal, () train elief otting oot 75 degrees 0-- 0-- 0-- () 0-- () 0-- 0-- o complete part number see how to order on page 36. ll lockwire holes are.044 ia. in. hell ize lug ront iew ia. ±.031 lass, () +.010.025 ±.062 +.047.025 lug ide iew ±.025 lass ±.015 ±.015 10.921.749.170 1.191.393 2.137.547.43.562 2.031 12 1.046.12.264 1.191.450 2.222.625.516.6 2.093 14 1.171.905.310 1.254.519 2.370.734.625.71 2.203 16 1.297 1.030.330 1.316.53 2.572.750.656.90 2.250 1 1.422 1.015.444 1.562.621 2.60.71.703 1.000 2.296 20 1.562 1.077.510 1.625.63 2.753.59.766 1.125 2.343 22 1.672 1.139.515 1.719.739 2.799.906.12 1.234 2.390 24 1.797 1.250.656 1.750.77 3.037 1.11.91 1.374 2.624 ll dimensions for reference only. 35
-, -, /- how to order -, - o more easily illustrate ordering procedure, part number 00-20- 41W() is shown as follows: 00-20 - 41 W () 1 2 3 4 5 6 7 ee code below: 1. onnector ype designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with crimp contacts designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with dual mounting holes, and crimp contacts designates electrically non-conductive, hard anodic coated, bayonet lock connector with larger flange and mounting holes for back panel mounting, and crimp contacts designates plug with grounding fingers 2. hell tyle 00 designates wall mounting receptacle 01 designates cable connecting receptacle* 02 designates box mounting receptacle 06 designates straight plug 07 designates jam nut receptacle 0 designates 90 degree plug 3. ervice lasses designates environmental crimp designates potted type crimp oth of the above are mphenol proprietary versions of the I- -2642, eries 1 crimp contact connector and offer 15 lbs. contact reten tion for size 20 contacts; 25 lbs. for size 16 contacts. designates adapter for cable gland for moisture proofing jacketed cables 4. hell ize 20 designates shell size. hell sizes through 24 available. 5. Insert rrangement efer to pages 4-10 for insert availability. 20-41 designates insert arrangement. (he number following the hyphen is the number only that is used in the part number). 6. ontacts designates pin contacts designates socket contacts 7. Insert otation efer to page 6. W,, Y, designate that insert is rotated in its shell from normal position. o letter required for normal (no rotation) position.. designates a strain relief clamp. Indicate optional finishes as follows: (003) olive drab cadmium plate (standard on ) O o ompliant finish suffix as follow: (005) anodic coating - lumilite (standard on ) (023) electroless nickel (025) black zinc cobalt plating (072) conductive gray zinc nickel plating (424) electroless nickel finish with strain relief (470) black zinc cobalt plating with strain relief /- I--2642, eries 1 o more easily illustrate ordering procedure, part number 312020-41W is shown as follows: 312 0 20 41 W 1 2 3 4 5 6 7 ee code below: 1. designates ilitary tandard 2. pecification umber 312 designates basic family for I--2642, eries 1 crimp type 3. hell tyle 0 designates wall mounting receptacle 1 designates cable connecting receptacle* 2 designates box mounting receptacle 4 designates jam nut receptacle 6 designates straight plug 7 designates box mounting receptacle with dual mounting holes designates wall mounting receptacle with dual mounting holes 4. ervice lass designates environmental resisting connector designates environmental resisting connector with strain relief designates potted type with potting boot 5. hell ize 20 designates shell size. hell sizes through 24 available 6. Insert rrangement efer to pages 4-10 for insert availability. 20-41 designates insert arrangement. (he number follow ing the hyphen is the number only that is used in the part number). 7. ontacts designates pin contacts designates socket contacts. Insert otation efer to page 6. W,, Y, designate that insert is rotated in its shell from the normal position. o letter required for normal (no rotation) position. * his connector style is sometimes referred to as a cable connecting plug. It does, however, mate with either a straight or 90 degree plug. 36
& accessories sealing plugs, flange gaskets, potting boots I O & I I.135 +.030.025 ontact ize mphenol art umber umber ia. ±.010 ia. ±.005 ±.010 olor ode 12 10-405996-12 274-12.121.171.564 Yellow 16 10-405996-16 274-16.03.133.564 lue 20 10-405996-20 274-20.060.090.564 ed ow to Order: Order by 10- (roprietary) or part number as shown in chart above. I 274-10-405996- OI O & OI 10-101949- 10-150949- hell ize ±.010 10-101949 ±.010 ±.010 10-150949 ±.010 +.016.000 & 10-101949 10-150949 ±.00 6.469.6.641.953.375.024.594.12.734 1.047.500.024 10.719.93.12 1.125.625.024 12.13 1.031.93 1.250.750.024 14.906 1.125 1.031 1.344.75.024 16.969 1.219 1.125 1.43 1.000.024 1 1.063 1.312 1.203 1.516 1.125.024 20 1.156 1.43 1.297 1.672 1.250.024 22 1.250 1.563 1.375 1.750 1.375.024 24 1.375 1.6 1.500 1.75 1.500.024 ow to Order: or : 10-101949- (complete order number with desired shell size). or : 10-150949- (complete order number with desired shell size). 75 OI OO O & 75 OI OO 10-1019- hell ize ±.015 ±.015.433.312.43.766 10.493.43.562.30 12.552.516.6.61 14.643.625.71.916 16.65.656.90.936 1.69.703 1.000.959 20.750.766 1.125 1.052 22.794.12 1.234 1.073 24 1.070.91 1.374 1.310 ow to Order: 10-1019- (complete order number with desired shell size). ll dimensions for reference only. 37
& accessories clamps I I O & I I 10-101971- hell ize hread lass 2 in..550 6-32.240.12.930 10.675 6-32.302.75.930 12.03 6-32.42 1.000.930 14.920 6-32.552 1.125.930 16 1.047 6-32.615 1.1 1.062 1 1.165-32.740 1.43 1.062 20 1.291-32.740 1.43 1.093 22 1.41-32.92 1.719 1.093 24 1.533-32.92 1.719 1.093 ow to Order: 10-101971- dd desired dd desired finish suffix shell size 3 designates olive drab cadmium 5 designates lumilite ot for use with jam nut style connectors. & I I 10-10190- & I I O & hell ize hread lass 2 in. +.010.020.540 6-32.240.12.43 10.665 6-32.302.75.43 12.793 6-32.42 1.000.43 14.910 6-32.552 1.125.43 16 1.037 6-32.614 1.1.975 1 1.155-32.740 1.43.975 20 1.21-32.740 1.43 1.007 22 1.40-32.92 1.719 1.007 24 1.533-32.93 1.719 1.007 ow to Order: 10-10190- dd desired dd desired finish suffix shell size 3 designates olive drab cadmium 5 designates lumilite ot for use with jam nut style connectors. hread 97-3057- O & hell ize mphenol art umber ±.031 ia. in. hread 10 97-3057-1004.795.42.3125.6250-24 12 97-3057-1007.50.995.4375.7500-20 14 97-3057-100.920 1.120.5625.750-20 16 97-3057-1010.920 1.216.6250 1.0000-20 1/20 97-3057-1012.927 1.403.7500 1.175-1 22/24 97-3057-1016 1.015 1.63.9375 1.4375-1 ow to Order: Order by 97-3057- number listed above. tandard finish is olive drab zinc alloy. onsult mphenol, idney, Y for alternate finishes. tandard accessory finishes are 3 olive drab cadmium for and / types, 5 lumilite for types. lectroless nickel plating is also available on some items; consult mphenol, id ney, Y ll dimensions for reference only. 3
,, / accessories protection caps OIO O,, / OO OIO O,, / ia. +.010.000 ia. +.010.000 ia. +.020.000 td. &,, only // hell ize 6.32.454.577.563 3.000 5.000.454.57.706.563 3.000 5.000 10.57.703.16.563 3.000 5.000 12.703.91 1.000.563 3.500 5.000 14.44 1.016 1.12.563 3.500 5.000 16.969 1.141 1.257.563 3.500 5.000 1 1.094 1.266 1.367.563 3.500 5.000 20 1.219 1.391 1.496.563 4.000 5.000 22 1.343 1.516 1.624.563 4.000 5.000 24 1.453 1.614 1.747.603 4.000 5.000 10-101960- 10-101961- 10-101964- 311- (able onnecting 311- (Wall eceptacle) eceptacle) (am ut eceptacle) ow to Order roprietary eceptacle aps: Wall eceptacle aps: able onnecting eceptacle aps: am ut eceptacle aps: dd desired shell size dd desired finish suffix designates gray zinc nickel 3 designates olive drab cadmium 5 designates lumilite 10-101960- 10-101961- 10-101964- roprietary caps are supplied with standard bead chains only (as shown in draw ing at left). or other chain options, an version cap should be ordered. ow to Order ersion eceptacle aps: Wall eceptacle aps: 311- - for sash chain - for long sash chain - for rope chain - for long rope chain am ut ecept. aps: 311- - for sash chain - for long sash chain hell size versions are supplied with standard anodize finish only. or other finish options a proprietary cap should be ordered. OIO O,, / OIO O,, / OO 310-10-101957- tandard accessory finishes are 3 olive drab cadmium for and / types, 5 lumilite for types. lectroless nickel plating is also available on some items; consult mphenol, idney, Y ll dimensions for reference only. 39 ia. +.001.005 ia. +.025.015 td. &, only / hell ize 6.34.532 3.000 5.000.473.532 3.000 5.000 10.590.532 3.000 5.000 12.750.532 3.500 5.000 14.75.532 3.500 5.000 16 1.000.532 3.500 5.000 1 1.125.532 3.500 5.000 20 1.250.594 4.000 5.000 22 1.375.594 4.000 5.000 24 1.500.627 4.000 5.000 ow to Order roprietary lug aps: dd desired shell size 10-101957- dd desired finish suffix designates gray zinc nickel 3 designates olive drab cadmium 5 designates lumilite roprietary caps are supplied with standard bead chains only (as shown in draw ing at left). or other chain options an version cap should be ordered. ow to Order ersion lug aps: 310- - for sash chain - for long sash chain hell size - for rope chain - for long rope chain
& accessories dummy receptacles, O rings, plastic dust caps Y O,, / ¹ ¹ ¹ ¹ Y O,, / OO 3115-10-150921- I hell ize ±.010 +.030.000 +.001.005 roprietary ersion ±.005 ±.010 1 () ersion 1 ().062.462.473.734 1.047.594.2 10.062.462.590.12 1.125.719.954 12.062.462.750.93 1.250.12 1.047 14.062.462.75 1.031 1.344.906 1.141 16.062.462 1.000 1.125 1.43.969 1.234 1.062.462 1.125 1.203 1.516 1.062 1.32 20.062.556 1.250 1.297 1.672 1.156 1.453 22.062.556 1.375 1.375 1.750 1.250 1.57 24.062.59 1.500 1.500 1.75 1.375 1.703 ow to Order roprietary ummy eceptacles: dd desired shell size ow to Order ersion ummy eceptacles: 10-150921- dd desired finish suffix designates gray zinc nickel 3 designates olive drab cadmium 5 designates lumilite dd desired shell size 3115- dd desired finish suffix - designates lumilite - designates electroless nickel -W designates olive drab cadmium O, hell ize lug lastic ust ap eceptacle lastic ust ap 6 10-70500- 10-70506- 10-70506-12 10-70506-10 10 10-70500-12 10-70506-12 12 10-70506-16 10-70506-14 14 10-70506-1 10-70506-16 16 10-70506-20 10-70506-1 1 10-70506-22 10-70506-20 20 10-70506-24 10-79506-22 22 10-70524-1 10-70506-24 24 10-70506-2 10-70524-1 ow to Order lastic ust aps: o the basic order number add the dust cap size to match connector plug or receptacle shell size, as shown in the tables above. xample: 10-70506-12 would be the correct order number for a plastic dust cap for a 00 receptacle, shell size 10. ll dimensions for reference only. 40
accessories glands ylon able lands ylon able lands ylon able lands aterial: ylon 66 ( pproved 94-2) aterial: eal ing: ylon 94-2( 66 pproved 94-2) aterial: eal ing: ylon 94-2( 66 pproved 94-2) hread ype: etric,, eal hread ing: ype: etric 94-2(,, pproved 94-2) emp ange: tatic: - 40 +100 emp hread ange: ype: tatic: etric,, ynamic: - 20 40 + +100 0 emp ange: ynamic: tatic: 40 + +100 hort erm: +120 0 ynamic: hort erm: - +120 + 0 urrent olors: ray, lack urrent olors: ray, hort lack erm: +120 urrent olors: ray, lack etal able lands etal able lands etal able lands aterial: rass with ickel; rass with in/ickel aterial: lamping: rass approved with ickel; 6, rass 94-0with in/ickel aterial: lamping: rass approved with ickel; 6, rass 94-0 with in/ickel eal ing: 94-2 ( approved, 94-2; approved lamping: eal ing: 94-2 approved ( 6, approved 94-0 OW OI,, 94-0 94-2; approved eal ing: OW 94-2 OI ( approved,, 94-0 94-2; approved hread ype: etric,, hread ype: OW etric, OI,, 94-0 rotective: I6 (tighten with o-ring) rotective: hread ype: I6 etric, (tighten, emp ange: - 40 +100 with o-ring) rotective: emp ange: I6-40 (tighten +100 with o-ring) orque alue (-) to tighten the fitting to the flexible cord: 6.25- emp ange: - 40 +100 orque alue (-) to tighten the fitting to the threaded flexible cord: hub: 6.25-4.17- orque alue alue (-) (-) to of tighten hex and the cap fitting nuts: to 3.0-4.5 the threaded flexible cord: - hub: 6.25-12, 16, 20 are recognized under file # 339605 4.17-12, 12, orque 16, alue 16, 20 (-) 20 are to are tighten recognized the fitting recognized under to under file the file # threaded # 339605hub: 4.17-12, 16, 20 are recognized under file # 339605 339605 ylon able lands ylon able lands ylon able lands ax d able ange hread lamp panner "" IO art hread ax (mm) d able (mm) ange hread (mm) lamp (mm) panner (mm) "" IO art hread IO-12 12x1.5 ax (mm) d able 3 (mm) ange 6.5 hread (mm) lamp (mm) 20 panner (mm) 15 "" IO art hread IO-12 IO-16 12x1.5 16x1.5 (mm) 3 (mm) 4 6.5 (mm) (mm) 20 22 (mm) 15 19 IO-16 IO-12 IO-1 1 16x1.5 12x1.51.5 10 35 4 6.5 10 9 22 20 25 19 15 22 IO-1 IO-16 IO-20 1 20 16x1.5 1.5 10 12 56 4 10 12 9 25 22 30 22 19 24 IO-20 IO-1 IO-22 20 1 22 1.5 12 10 14 10 65 12 10 14 10 9 25 30 24 22 27 IO-22 IO-20 IO-24 22 20 24 1.5 12 14 10 6 12 14 10 9 30 24 27 IO-24 IO-22 IO-25 24 22 25x1.5 14 1 10 13 14 1 10 30 27 33 IO-25 IO-24 IO-30 24 30 25x1.5 2.0 14 1 10 13 14 1 10 11 30 33 27 33 IO-30 IO-25 IO-32 30 32 25x1.5 2.0 1 25 1 13 25 1 10 11 33 30 3 33 42 IO-32 IO-30 IO-33 32 30 33 1.5 2.0 1 25 13 1 1 25 11 3 33 39 33 42 IO-33 IO-32 IO-40 33 32 40 2.0 1.5 25 32 1 22 25 32 13 11 39 3 4 42 54 IO-40 IO-33 IO-50 40 33 50 2.0 1.5 32 25 3 22 1 32 3 32 25 13 14 11 4 39 50 54 42 60 IO-50 IO-40 IO-72 50 40 72 1.5 2.0 3 32 57 32 22 51 3 57 32 14 13 16 50 4 75 60 54 0 IO-72 IO-50 IO-I1/2 72 50 1/2 2.0 1.5 57 3 12 51 32 6 12 57 3 13.6 16 14 75 50 2 0 60 24 IO-I1/2 IO-72 IO-I3/4 72 1/2 3/4 2.0 12 57 1 51 13 6 12 57 1 13.6 14.1 16 2 75 32 24 0 33 IO-I3/4 IO-I1/2 IO-I5/4 1 1/4 3/4 1/2 1 12 32 13 22 6 12 1 32 14.1 13.6 17.3 32 2 46 33 24 54 IO-I5/4 IO-I3/4 IO-I3/2 1 1/4 1 1/2 3/4 1 32 13 22 1 32 14.1 17.3 46 32 50 33 54 IO-I3/2 IO-I5/4 IO-I1/2 1 1/2 1 1/4 1/2 32 12 22 6 12 32 17.3 9 50 46 26 54 24 IO-I1/2 IO-I3/2 IO-I3/4 1 1/2 1/2 3/4 12 32 1 22 13 6 12 1 32 17.3 11 9 26 50 27 24 54 33 IO-I3/4 IO-I1/2 3/4 1/2 1 1 12 25 13 1 6 12 1 25 11 9 27 26 33 33 24 42 IO-I1 IO-I3/4 IO-I5/4 1 1/4 3/4 25 1 2 1 13 21 1 2 25 13 11 33 27 4 42 33 54 IO-I5/4 IO-I1 IO-I3/2 1 1/4 1 1/2 2 25 32 21 1 22 2 25 32 13 11 33 4 42 54 IO-I3/2 IO-I5/4 IO-I5/2 1 1/2 1 1/4 2 1/2 32 2 57 22 21 51 2 57 32 13 14 4 75 54 0 IO-I5/2 IO-I3/2 IO-7 2 1/2 1 1/2 7 6.5 57 32 51 22 3 6.5 57 32 14 13 75 4 20 0 54 15 IO-7 IO-I5/2 IO-9 2 1/2 7 9 6.5 57 51 34 6.5 57 14 20 75 22 15 0 19 IO-9 IO-7 IO-11 11 9 7 6.5 10 35 4 6.5 10 22 20 24 19 15 22 IO-11 IO-9 IO-13.5 13.5 11 9 10 12 6 5 4 12 10 9 24 22 26 22 19 24 IO-13.5 IO-11 IO-16 13.5 16 11 12 10 14 10 6 5 12 10 14 10 9 26 24 2 24 22 27 IO-16 IO-13.5 IO-21 13.5 16 21 14 12 1 13 10 6 12 1 14 10 11 9 2 26 33 27 24 33 IO-21 IO-16 IO-29 21 16 29 1 14 25 13 1 10 1 25 14 10 11 33 2 3 33 27 42 IO-29 IO-21 IO-36 29 21 36 25 1 32 1 13 22 1 25 32 13 11 3 33 4 42 33 54 IO-36 IO-29 IO-42 36 29 42 32 25 3 22 1 32 3 32 25 13 14 11 4 3 52 54 42 60 IO-42 IO-36 42 36 3 32 32 22 3 32 14 13 52 4 60 54 IO-42 42 3 32 3 14 52 60 or additional information on other products available refer or additional information on other products available refer or additional to our ord to our ord information rips & able rips & able on other lands, lands, products atalog atalog available 12-055. 12-055. refer to our ord rips & able lands, atalog 12-055. etal able lands etal able lands ax d etal IO art able hread lands able ange hread lamp ax (mm) d able (mm) ange hread (mm) lamp (mm) IO art hread IO-12 12x1.5 ax (mm) 6.5 d able 3 (mm) ange 6.5 hread (mm) 6.2 lamp (mm) 15 IO art hread IO-12 IO-14 12x1.5 14x1.5 (mm) 6.5 3 (mm) 4 6.5 (mm) 6.2 5 (mm) 15 19 IO-14 IO-12 IO-16 14x1.5 16x1.5 12x1.5 6.5 9 34 6 6.5 9 6.3 6.2 5 15 19 20 IO-16 IO-14 IO-1 16x1.5 14x1.5 1x1.5 10 9 5 64 10 9 6.3 57 19 20 IO-1 IO-16 IO-20 1x1.5 16x1.5 20x1.5 10 12 9 56 10 12 9 6.3.3 7 20 IO-20 IO-1 IO-22 22 20x1.5 1x1.5 12 10 14 10 65 12 10 14.3 7 20 24 IO-22 IO-20 IO-24 22 24 20x1.5 12 14 10 6 12 14.3 20 24 IO-24 IO-22 IO-25 24 22 25x1.5 14 1 10 13 14 1 7. 24 23 IO-25 IO-24 IO-27 24 27 25x1.5 2.0 14 1 10 13 14 1 7. 23 24 26 IO-27 IO-25 IO-30 27 30 25x1.5 2.0 1 13 1 7. 23 26 IO-30 IO-27 IO-32 30 27 32 2.0 1.5 1 25 13 1 1 25 10 26 27 IO-32 IO-30 IO-36 32 30 36 1.5 2.0 1 25 13 1 1 25 10 27 26 34 IO-36 IO-32 IO-40 36 40 32 2.0 1.5 25 32 1 22 25 32 10 27 34 39 IO-40 IO-36 IO-50 40 36 50 2.0 1.5 32 25 3 22 1 32 32 25 3 10 11 34 39 IO-50 IO-40 IO-63 50 40 63 1.5 3 32 44 32 22 37 3 32 44 10 12 11 39 43 IO-63 IO-50 IO-72 63 50 72 1.5 2.0 44 3 52 37 32 46 44 3 52 12 16 11 43 39 47 IO-72 IO-63 IO-0 72 63 0 1.5 2.0 52 44 60 46 37 52 52 44 60 16 12 20 47 43 57 IO-0 IO-72 IO-90 0 90 72 2.0 52 60 70 46 52 62 52 60 70 16 20 47 57 IO-90 IO-0 IO-I1/2 90 0 1/2 2.0 70 60 12 62 52 6 12 70 60 13.6 20 57 25 IO-I1/2 IO-90 IO-I3/4 90 1/2 3/4 2.0 12 70 1 62 13 6 12 70 1 13.6 14.1 20 25 57 26 IO-I3/4 IO-I1/2 IO-I5/4 1 1/4 3/4 1/2 1 12 32 13 22 6 12 1 32 14.1 13.6 17.3 26 25 41 IO-I5/4 IO-I3/4 IO-I3/2 1 1/4 1 1/2 3/4 1 32 13 22 1 32 14.1 17.3 41 26 46 IO-I3/2 IO-I5/4 IO-I2 1 1/2 1 1/4 2 44 32 22 37 32 44 17.7 17.3 41 46 IO-I2 IO-I3/2 IO-I5/2 1 1/2 2 1/2 44 32 52 37 22 46 44 32 52 17.7 17.3 23.7 46 5 IO-I5/2 IO-I2 IO-I3 2 3 1/2 52 44 70 46 37 62 52 44 70 23.7 17.7 26 46 5 IO-I3 IO-I5/2 IO-I1/2 2 3 1/2 1/2 70 52 12 62 46 6 12 70 52 23.7 26 5 24 IO-I1/2 IO-I3 IO-I3/4 3 1/2 3/4 12 70 1 62 13 6 12 70 1 26 24 5 27 IO-I3/4 IO-I1/2 1/2 3/4 1 1 25 12 13 1 6 12 1 25 10 24 27 34 IO-I1 IO-I3/4 IO-I5/4 1 1/4 3/4 25 1 32 1 13 22 25 1 32 10 34 27 39 IO-I5/4 IO-I1 IO-I3/2 1 1/4 1 1/2 25 32 1 22 25 32 10 34 39 IO-I3/2 IO-I5/4 IO-I2 1 1/2 1 1/4 2 32 44 22 37 32 44 10 12 39 44 IO-I2 IO-I3/2 IO-I5/2 1 1/2 2 2 1/2 44 32 52 37 22 46 44 32 52 12 10 16 44 39 47 IO-I5/2 IO-I2 IO-I3 2 2 3 1/2 52 70 44 37 46 62 44 52 70 12 16 20 44 47 55 IO-I3 IO-I5/2 IO-7 2 7 3 1/2 6.5 70 52 62 46 3 6.5 70 52 20 16 6 55 47 1 IO-7 IO-I3 IO-9 7 9 3 6.5 70 62 34 6.5 70 20 67 1 55 21 IO-9 IO-7 IO-11 11 9 7 6.5 10 35 4 6.5 10 67 21 1 20 IO-11 IO-9 IO-16 16x1.5 11 9 10 6.2 54 10 6.5 7 20 21 22 IO-16 IO-11 IO-13.5 16x1.5 13.5 11 10 12 6.2 56 10 12 6.5 7 22 20 24 IO-13.5 IO-16 IO-16 16x1.5 13.5 16 12 10 14 6.2 10 6 12 14 10 6.5 24 22 25 IO-16 IO-13.5 IO-21 13.5 16 21 14 12 1 10 13 6 12 14 1 25 24 26 IO-21 IO-16 IO-36 21 16 36 1 14 32 13 10 22 1 14 32 10 26 25 3 IO-36 IO-21 IO-42 42 36 21 3 32 1 32 22 13 3 32 1 10 11 42 3 26 IO-42 IO-36 IO-4 42 36 4 3 32 44 32 22 37 3 32 44 10 12 11 42 3 44 IO-4 IO-42 4 42 44 3 37 32 44 3 12 11 44 42 IO-4 4 44 37 44 12 44 panner "" panner (mm) "" panner (mm) 14 "" (mm) 14 15 15 14 1 1 15 22 1 22 22 24 24 22 27 27 24 30 27 30 30 32 32 30 40 32 40 40 50 50 40 60 60 50 67 67 60 75 75 67 90 100 90 75 100 90 24 100 24 30 30 24 50 30 50 50 65 65 50 0 100 0 65 100 0 24 100 24 30 30 24 40 40 30 50 40 50 50 65 65 50 2 100 2 65 100 2 14 100 14 1 1 14 22 22 1 20 20 22 22 20 24 24 22 30 30 24 50 50 30 60 60 50 65 65 60 65 41
pplication ools he following data includes information pertaining to the application tools for crimping, insert ing and removing size 20, 16, and 12 contacts incorporated in mphenol iniature ylindri cal onnectors. ll crimping tools included are the full cycling type, and when used as specified by the manu facturer, provide reliable crimped wire to contact termination. ool frames and turret heads are available from approved tool manufacturers; consult mphe nol, idney, Y for listings. ssembly instructions are available online at www.amphenol-industrial.com ee the following: -76 for assembly instructions -555 for solder type instructions II OO O -, -, /- (I--2642, eries 1) onnectors ontact ize ool art umber ool rame urret ead 20 22520/1-01 22520/1-02 16 22520/1-01 22520/1-02 12 22520/1-01 22520/1-02 IIO/O OO O -, -, /- (I--2642, eries 1) onnectors ontact ize mphenol ontact Insertion liers Insertion ool mphenol ontact Insertion ool art umber ontact Insertion ool mphenol ontact emoval ool emoval ool art umber ontact emoval ool 20 11-107-20 11-7401-20 1969/17-03 11-70-20 1969/19-07 16 11-107-16 11-7401-16 1969/17-04 11-70-16 1969/19-0 12 1969/17-05 1969/19-09 42
ontacts - ower and hermocouple rimp for miniature cylindrical connectors he following tables provide part number information for crimp contacts used in mphenol iniature ylindrical onnectors. or additional information, consult mphenol, idney, Y. I O for I--2642, eries 1 (-, -) onnectors ins ockets ontact ize ccommodates Wire ize umber mphenol roprietary umber umber mphenol roprietary umber 20 20, 22 & 24 W 39029/31-240 10-6377-20 39029/32-259 10-731210-31 16 16, 1 & 20 W 39029/31-22 10-637-16 39029/32-247 10-679379-16 12 12 & 14 W 39029/31-235 10-07100-125 39029/32-254 10-07103-125 20-16 16 W 10-330930-20 10-07155-205 16-20 20 W 10-330932-16 10-330933-16 12-10 12 W 10-33093-12 10-330939-12 OO O for iniature onnectors ize 16 rimp ermination 20 rimp ermination aterial ins roprietary art umber ockets roprietary art umber hromel 10-330940-21 10-330940-21 lumel 10-330940-22 10-330940-22 hromel 10-330940-1 10-330940-1 lumel 10-330940-2 10-330940-2 Iron 10-330940-3 10-330940-3 onstantan 10-330940-4 10-330940-4 ee -776 for thermocouple contact termination instructions. hese are online at www.amphenol-industrial.com or contacts for miniature connectors, see page 20. 43
oaxial ontacts for miniature cylindrical connectors mphenol iniature onnectors can incorporate shielded coax contacts. he iniature family is built around I--2642 specifications, with ilapproved and proprietary styles offered. ormal operating voltage for inia ture cylindricals with power only contacts is up to 1,000 () at sea level. able 1: iniature ylindricals offer these features for contact termination flexibility: everal insert arrangements that can incorporate: ize & 12 rimp oax contacts for rimp type ize & 12 older oax contacts for older type Wide selection of connector shell styles and sizes tandard power contact options within the various connector styles include: solder type, crimp front release, crimp rear release oax contacts are designed to the same high performance standards as power contacts. oax and power contacts may be intermixed with no deg radation of connector reliability. o mis-mating or cross-plugging with insert rotation and keyway polarization. older oax ontact for use in iniature older ype onnectors in rimp oax ontact for use in iniature rimp ype onnectors able 2: OI IOIO mphenol iniature ylindricals are normally supplied with a full complement of power contacts, separately packaged. oax contacts are ordered by part number as referenced in the part number charts on the following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. If the application is for coax only, the connector may be ordered less contacts and no power contacts will be supplied. Installation instructions for the coax contacts for iniature onnectors are provided in mphenol documents as follows: -633 for solder type; -613 for type. ocket rimp oax ontact for use in iniature rimp ype onnectors OW O O:. elect the coax contacts designed for the cable being used from the appli cable charts in this catalog for each iniature type (solder, ).. elect a connector insert from those shown on pages 4-5 which will accommodate the quantity and size of coaxial contacts needed plus any power contacts required. ote: ize and 12 contacts are used with connector inserts through shell size 1 only. or larger connector shell sizes, use size contacts.. etermine the iniature ylindrical type, shell style, finish, service class and insert rotation required for your application.. onsult mphenol, idney Y with the pertinent cable, contact, insert arrangement and connector style choices for complete connector part number. 44
oaxial ontacts for miniature cylindrical connectors, cont. mphenol oaxial ontacts designed for use in iniature ylindrical onnectors offer the same durability advantages and design benefits for reliable interconnection as the mphenol coax contacts used in high performance 3999 connectors. variety of military and commercial shielded cables are accommodated within the miniature cylindrical series. mphenol supplies coax contacts for solder and crimp connector styles. Other features of the coax for miniature cylindricals include: iniature coax design has an outside nut within the assembly for fast, reliable assembly of contact to cable. ll types feature solder style inner contacts and crimp style outer contacts for reliable cable termination iniature coax crimp type contacts are designed for use in iniature crimp series connectors iniature coax solder type contacts are designed for use in iniature solder series connectors. hese come pre-installed into the solder connector. YI II I O O O has crimp socket outer contact with a solder pin inner contact YI I O ize and 12 oax ontacts ontact esistance: enter @ 1 mp, 170 millivolts max. voltage drop @ 25 Outer @ 12 mps, 150 millivolts max. voltage drop @ 25 ielectric Withstanding oltage: ize : 1,300 ms @ sea level ize 12: 1,000 ms @ sea level ize & 12: 250 ms @ 50,000 ft. Insulation esistance 5,000 megohms minimum @ 25 ypical W for size & 12 - ypes II & III only: 1.2 +.12 (z) up to 10 z IO O Y IIIO: - ype I is moisture seal design with internal O-ring. - ype II is 50 ohm impedance matched version. ontacts termi nated to other than 50 ohm cables are therefore not matched. - ype III is 50 ohm contact, non-serviceable after assembly. olders are non-impedance matched contacts. O II: uffix inish 1 0.00020 min. silver over copper flash 2 0.00005 min. gold (noop hardness 130-200) over silver 3 0.00010 min. gold (noop hardness 130-200) over silver 4 0.00010 min. gold (noop hardness 130-200) over copper 5 0.00005 min. gold (noop hardness 130-200) over nickel 0.00005 min. gold (noop hardness 90 max.) over copper 0.00005 min. gold (noop hardness 130-200) over copper 0.00010 min. gold (noop hardness 130-200) over copper YI II I O I O has crimp pin outer contact with a solder socket inner contact 45
oaxial ontacts for miniature cylindrical connectors, cont. solder (I--2642 eries 1 type) - application data I I I O I I I I O: ll contacts of the same size and the same inner and outer contact diameters ( & ) will mate with each other. able -5/, -141/, -303/ -59/, -62/, -62/, -210/ -142/, imes I51115-161/, -174/, -179/, -17/, -1/, -316/ ontact art umber O O O or use in iniature older ype onnectors:,, and / tyles ontact ize imensional ata (ee rawings above) cross ength ef. ia. ia. lats in ocket ±0.001 ±0.004 in ocket 21-33020-2 21-33019-2 21-33020-1 21-33019-1 21-33020-3 21-33019-3 21-33020-7* 21-33019-7* 21-33020-32* 21-33019-32* 12-17/ 21-33020-4 21-33019-4* -196/ 21-33020-31-10/, -195/, aychem 50221312-9 aychem 50211331-9 hermatics 2929-29 21-33061- 31* 12 21-33020-5* 21-33019-5* 21-33020-6* 21-33019-6* 21-33020-33 21-33061-33 12 0.040 ± 0.001 0.040 ± 0.001 0.040 ± 0.001 0.040 ± 0.001 0.0300 ± 0.0005 0.040 ± 0.001 0.0300 ± 0.0005 0.040 ± 0.001 0.040 ± 0.001 0.0200 ± 0.0005 O: ontacts can be ordered by part numbers given in chart O: ize and 12 contacts are used with connector inserts through shell size 1 only. or larger connector shell sizes, use size contacts. O II: or all contacts in this series feature 0.000050 minimum gold (noop hardness 130-200). 46 I--22910/7-1 ool se with ie art umber 0.219 0.20 1.114 1.115 22910/7-15 () 0.219 0.20 1.176 1.177 0.219 0.20 1.114 1.115 rimp errule ools I--22520/5-01 ool se with ie art umber 22520/5-05 () 22520/5-41 () I--22520/10-01 ool se with ie art umber etainer ut Wrench 22520/10-07 () 11-676-2 22910/7-1 () 22520/5-45 () 11-676-3 0.219 0.20 1.114 1.115 22910/7-16 () 22520/5-43 () 11-676-2 0.140 0.172 1.092 1.093 22910/7-12 () 0.219 0.20 1.114 1.115 22910/7-11 () 0.140 0.172 1.092 1.093 22910/7-11 () 0.219 0.20 1.114 1.115 22910/7-15 () 0.219 0.20 1.114 1.115 22910/7-15 () 22520/5-03 () 22520/5-0 () 22520/5-35 () 22520/5-03 () 22520/5-33 () 22520/5-03 () 22520/5-33 () 22520/5-05 () 22520/5-41 () 22520/5-05 () 22520/5-41 () 22520/10-05 () 11-676-1 22520/10-05 () 11-676-2 22520/10-05 () 11-676-1 22520/10-07 () 11-676-2 22520/10-07 () 11-676-2 0.140 0.172 1.092 1.093 22910/7-13 () 22520/5-37 () 11-676-1 * onsult mphenol, idney Y for availability II OO: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. ommercial equivalents with the same die closure dimension may be used. 21-33020-31 and 21-33061-31 only mate with each other
oaxial ontacts for miniature cylindrical connectors, cont. crimp (I--2642 eries 1 type) - application data able -55/, -142/, -142/, -223/ -5/, -141/, -303/ -59/, -62/, -62/, -210/ -140/, -302/ -161/, -174/, -179/, -17/, -1/, -316/ -17/, -196/ ontact art umber I O O or use in iniature rimp ype onnectors: -, -, and /- tyles imensional ata (ee rawings above) inish ontact on ype ength ef. ize ating cross arts ia. I--22910/7-1 ia. lats in ocket ±0.001 ool ±0.004 in ocket se with ie art umber 21-33012-21 21-33012-25 21-3303-21 21-3303-25* 21-33011-21 21-33011-25 21-33037-21 21-33037-25 21-3313-21( )* 21-33137-21( )* 21-3313-25( )* 21-33137-25( )* 21-33012-22 21-33012-26 21-3303-22* 21-3303-26* 21-33011-22 21-33011-26 21-33037-22 21-33037-26* 21-3313-22( )* 21-33137-22( ) 21-3313-26( )* 21-33137-26( )* I II I II I II I II I II I II 21-33012-36 21-33011-36 II 2 21-3303-36* 21-33037-36 II 4 21-3313-36( )* 21-33137-36( ) II ** 21-33012-37* 21-33011-37* II 2 21-3303-37* 21-33037-37* II 4 21-3313-37( )* 21-33137-37( )* II ** 21-33012-34 21-33012-30 21-3303-34 21-3303-30 21-33011-34 21-33011-30 21-33037-34 21-33037-30 21-3313-34( )* 21-33137-34( )* 21-3313-30( )* 21-33137-30( )* 21-33012-1 21-33012-4 21-3303-1* 21-3303-4 21-3313-1( )* 21-3313-4( )* 21-33011-1 21-33011-4 21-33037-1* 21-33037-4* 21-33137-1( ) 21-33137-4( )* 12 12 12 12 12 12 I II I II I II I II I II I II 21-33012-35 21-33011-35 I 2 21-3303-35 21-33037-35 I 4 21-3313-35( )* 21-33137-35( )* I ** 21-33012-3* 21-33012-5 21-3303-3* 21-3303-5 21-3313-3( )* 21-3313-5( )* 21-33011-3* 21-33011-5 21-33037-3* 21-33037-5* 21-33137-3( )* 21-33137-5( )* O 12 12 12 12 12 12 I II I II I II 2 4 ** 2 4 ** 2 4 ** 2 4 ** 2 4 ** I I I 47 rimp errule ools I--22520/5-01 ool se with ie art umber 0.0355 ±0.0010 0.21 0.20 1.156 1.144 22910/7-17 () 22520/5-05 () 22520/5-19 () 0.0355 ±0.0010 0.21 0.20 1.156 1.144 22910/7-15 () 22520/5-05 () 22520/5-41 () I--22520/10-0 ool se with ie art umber etainer ut Wrench Installation ools Insertion 22520/10-07 () 11-676-2 11-369-5 11-660-5 22520/10-07 () 11-676-2 11-369-4 11-660-4 0.0355 11-369-5 0.21 0.20 1.156 1.144 22910/7-1 () 22520/5-45 () 11-676-3 ±0.0010 11-660-5 0.0355 ±0.0010 0.21 0.20 1.156 1.144 22910/7-17 () 22520/5-05 () 22520/5-19 () 0.0355 0.21 0.20 1.156 1.144 ±0.0010 22910/7-12 () 22520/5-03 () 22520/5-0 () 22520/5-35 () 22520/10-07 () 11-676-2 11-369-5 11-660-5 22520/10-05 () 11-676-2 11-369-2 11-660-2 emoval 11-70- 11-154-1 11-70- 11-154-1 11-70- 11-154-1 11-70- 11-154-1 11-70- 11-154-1 0.0200 ±0.0005 0.12 0.172 1.092 1.072 11-676-1 11-70-12 11-154-2 0.0355 0.21 0.20 1.156 1.144 ±0.0010 O: ontacts can be ordered by part numbers given in chart ** ee finish options for crimp iniature contacts listed on page 44. eplace the paren thesis of the contact part number with the finish suffix number. owever, you should con sult mphenol, idney, Y regarding the availability of all finish choices for each part number. * onsult mphenol, idney Y for availability I I I 22910/7-11 () O: ll contacts of the same size and the same inner and outer contact diameters ( & ) will mate with each other. 22520/5-03 () 22520/5-33 () 22520/10-05 () 11-676-2 11-369-1 11-660-1 11-70- 11-154-1 0.0200 ± 0.0005 0.12 0.172 1.092 1.072 11-676-1 11-70-12 11-154-2 I II OO: Italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. ommercial equivalents with the same die closure dimen sion may be used. OI O
oaxial ontacts for miniature cylindrical connectors, cont. crimp (I--2642 eries 1 type) - application data, cont. able -10/, -195/ ontact art umber I O O or use in iniature rimp ype onnectors: -, -, and /- tyles imensional ata inish ontact ype on ength ef. ize ating cross arts ia. ia. lats in ocket ±0.001 ±0.004 in ocket 21-33012-24 21-33012-46* 21-3303-24 21-3303-46* 21-33011-24 21-33011-46* 21-33037-24 21-33037-46* 21-3313-24( )* 21-33137-24( )* 21-3313-46( )* 21-33137-46( )* aychem 9527111, 21-33106-40( ) -10/, 21-33105-40( ) 12 III ** -195/ -1 or -316 ouble raid hermax 50-25- -1-195 ouble raid -122/, aychem 50225111 aychem 95305314 aychem 95271317 aychem 7527131 Westrex 199-49-1, ensolite 3050/7-1 21-33012-6* 21-33012-7* 21-3303-6* 21-3303-7* 21-3313-6( )* 21-3313-7( )* 21-33011-6* 21-33011-7* 21-33037-6* 21-33037-7* 21-33137-6( )* 21-33137-7( )* 12 12 12 12 12 12 I II I II I II I II I II I II 21-33012-44 21-33011-44 II 2 21-3303-44* 21-33037-44* II 4 21-3313-44( )* 21-33137-44( )* II ** 21-33012-2 21-33011-2 I 2 21-3303-2* 21-33037-2* I 4 21-3313-2( )* 21-33137-2( )* I ** 21-33012-23 21-33012-27 21-3303-23* 21-3303-27 21-33011-23 21-33011-27 21-33037-23* 21-33037-27 21-3313-23( )* 21-33137-23( )* 21-3313-27( )* 21-33137-27( )* I II I II I II 21-33012-31 21-33011-31 I 2 21-3303-31 21-33037-31 I 4 21-3313-31( )* 21-33137-31( )* I ** 21-33012-39 21-33011-39 II 2 21-3303-39* 21-33037-39* II 4 21-3313-39( )* 21-33137-39( )* II ** 21-33012-40* 21-33011-40 II 2 21-3303-40* 21-33037-40* II 4 21-3313-40* 21-33137-40( )* II ** 21-33012-43 21-33011-43 12 II 2 21-3303-43 21-33037-43 12 II 4 21-3313-43( )* 21-33137-43( )* 12 II ** 2 4 ** 2 4 ** 2 4 ** I--22910/7-1 ool se with ie art umber rimp errule ools 47I--22520/5-01 ool se with ie art umber 0.0355 ± 0.0010 0.21 0.20 1.156 1.144 22520/7-15 () 22520/5-05 () 22520/5-41 () I--22520/10-0 ool se with ie art umber 0.0200 ± 0.0005 0.12 0.99 0.79 aniels 200 ool with 2330 or 22520/31-01 ool with ositioner 22520/31-02 1.072 0.0200 ± 0.0005 0.12 0.172 1.092 22910/7-13 () 22520/5-37 () 0.0355 ± 0.0010 0.0355 ± 0.0010 O: ontacts can be ordered by part numbers given in chart ** ee finish options for crimp iniature contacts listed on page 44. eplace the paren thesis of the contact part number with the finish suffix number. owever, you should con sult mphenol, idney, Y regarding the availability of all finish choices for each part number. * onsult mphenol, idney Y for availability etainer ut Wrench Installation ools Insertion emoval 22520/10-07 () 11-676-2 11-369-4 11-70- 11-660-4 11-154-1 11-674- 12 11-70-12 11-154-2 11-676-1 11-369-2 11-70-12 11-660-2 11-154-2 11-369-4 11-70- 0.12 0.20 1.156 1.144 11-676-2 11-660-4 11-154-1 11-369-4 11-70- 0.12 0.20 1.156 1.144 22910/7-16 () 22520/5-43 () 11-676-2 11-660-4 11-154-1 0.0355 ± 0.0010 0.21 0.20 1.156 1.144 22520/7-15 () 22520/5-05 () 22520/5-41 () 0.0355 ± 0.0010 0.21 0.20 1.156 1.144 22910/7-15 () 22520/5-05 () 22520/5-41 () 22520/5-03 () 0.0355 ± 0.0010 0.21 0.20 1.156 1.144 22910/7-12 () 22520/5-0 () 22520/5-35 () 0.0200 ± 0.0005 0.12 0.172 1.092 1.072 22910/7-11 () 22520/5-03 () 22520/5-33 () O: ll contacts of the same size and the same inner and outer contact diameters ( & ) will mate with each other. 22520/10-07 () 11-676-2 11-369-4 11-70- 11-660-4 11-154-1 22520/10-07 () 11-676-2 11-369-4 11-70- 11-660-4 11-154-1 22520/10-05 () 11-676-2 11-369-2 11-70- 11-660-2 11-154-1 22520/10-05 () 11-676-1 11-369-1 11-70-12 11-660-1 11-154-2 II OO: Italicized letters in parenthesis that follow positioner part numbers indi cate applicable die closure. ommercial equivalents with the same die closure dimension may be used. 4
ounting ecommendations for miniature cylindrical connectors O OO ll flange mounting connectors use standard mounting dimensions. hey cannot be back panel mounted due to coupling clearance. he (thru-bulkhead) type con nector must also be back panel mounted on one side. lange gaskets are available for both series, see page 37. hell ize () ia. 6.469.641.323.439.594.734.449.563 10.719.12.573.60 12.12.93.699.59 14.906 1.031.23.94 16.969 1.125.949 1.10 1 1.062 1.203 1.073 1.233 20 1.156 1.297 1.199 1.35 22 1.250 1.375 1.323 1.43 24 1.375 1.449 2 2 () O OO ia. -O 4 O 4.120 O ia. for hell izes 6-22.120 ia. for hell izes 6-22.147 & ia. for.147 ize ia. 24 for.150 ize ia. 24 for.150 only ia. for only IO o. 4 crew o. for 4 crew for & o. 6 crew o. 6 crew for for and and for ize ize 24 24 OI he jam nut design has become very popular because it allows bench wiring of harness assemblies. he labor saving often off sets the added cost of the jam nut receptacle which is due to the self contained O ring and the extra nut. hell +.010 +.000 anel hickness ize.000.010 ±.010 in. 6.447.420.26.062.125.572.542.331.062.125 10.697.669.375.062.125 12.4.30.442.062.125 14 1.007.955.46.062.125 16 1.134 1.04.530.062.125 1 1.259 1.20.573.062.125 20 1.34 1.333.641.062.250 22 1.507 1.459.65.062.250 24 1.634 1.575.062.250 O -O O IO I OI his series must be mounted in such a way as to preserve the I hermetic seal provided by the glass insert. ounting data for box and jam nut receptacles is given above. ut-out required for solder mounting receptacles () is given below. hell ize 6.45.52 10.692 12.01 14.926 16 1.051 1 1.176 20 1.395 22 1.375 24 1.520 he finish of each of these hermetic receptacles is fused electro-deposited tin for easy solderability, and protected by a special lacquer for optimum shelf life. he lacquer will not interfere with any soldering operation. ow temperature solder should be used and the addition of a solder fillet at arrow points on drawing at right is recommended. are must be taken that the operating temperature of the final assembly does not rise above the melt ing point of tin (440 ). -O 49 O (ee dimensions above) O (ee dimensions above)
Other mphenol iniature ylindrical onnectors eophysical iniature ylindricals esigned for the eophysical industry s rugged environments, the mphenol eries connector has custom features that provide reliability in extreme temperature and moisture condi tions. he unique shell design provides stronger shells along with an anodized (nonconductive) finish for greater salt, corrosion and abrasion resistance. oupling nuts are manufactured with round detent holes and are sold separately for greater customer flexibil ity. ee product data sheet #146. ield ayonet ylindricals mphenol division provides I--2642 bayonet coupling cylindrical connectors with an 45 thernet interface*. hese are designed for use in all levels of harsh environments from industrial to mil-aero applications providing I67 protection from dust, fluids, vibration, shock and traction. he mphenol ield allows the use of thernet lass /at 5 and at 5e connections for 10 ase, 100 ase, or 1000 ase networks. It works with any standard 45 cordset with no extra tooling. It also offers reinforced I protection. mphenol iniature ylindricals or more information go online to www.rjfield.com or ask for the ield eries brochure. * ield ayonet and other ield eries products are available through mphenol. hese include within I--3999 eries III threaded coupling connectors, and 544 within push-pull plastic shell coupling. ield ayonet ylindricals 50