Delivery Programme for Shipbuilding and Industry Valves, Fittings, Engineering and Service
Shipbuilding and Industry Our delivery programme for shipbuilding and industry includes: Valves, gate-, butterfly-, ball- and safety valves, fittings for fire extinguishers, filters, actuators, compensators and corresponding accessories according to national and international standards e.g. DIN, JIS, ANSI etc. in normal or in seawater resistant variants. Fittings and system solutions from our com pany are used in shipbuilding, machine- and plant-building as well as in industrial environments of (petro-) chemical industry, energy supply, nuclear power stations, water technology and -purification, steam generation, hospitals and breweries. stop and non-return valves safety and overflow valves solenoid valves gate valves butterfly and non-return valves compensators pressure reducing valves JIS valves filters ball valves Steam and Condensation Steam is unrivalled as heat and energy transfer in the specific output of energy. On the strength of the high pressure power every consumer is fed without additional energy. These and further properties are to be found in laundries, breweries, industrial plants (e.g. food producers), power plants and last but not least in seagoing vessels. Our delivery programme for steam and condensation additionally includes our range for shipbuilding and industry in: non-return valves, double non-return valves steam traps mechanical temperature control valves steam separators pressure reducing valves industrial electronics for level-, temperature- and conductivity measuring, monitoring as well as control loop systems. non-return valves steam traps and -units steam separators blow down valves boiler electronics 2 www.barthel-armaturen.de
Control Valves Automated 2- and 3-way valves control and monitor technical processes of gaseous and liquid fluids in all areas of ships and industry. To meet these requirements you can choose between different characteristic lines with several cone forms and seat combinations. All control valves meet the most actual level of technology in compliance with the ascertainments of quality in accordance with PED 97/23/EG, directive 94/9/ EG (ATEX) and DIN IEC 534. control valves High pressure control valves automated stop valves/ball valves temperature control valves Electronics Industrial electronics are an absolutely essential element of upgraded automation of technical processes. Assigned to shipbuilding, power-plants, chemical and pharmacy ventures, refineries, paper mills, breweries, super laundries, hospitals, in food industry, sugar fabrication, in tyre production and many other industrial branches designers benefit by rationalized economical procedures. Level Technology Barthel Armaturen distributes solutions for level measurement technology. Ship- and steam-boiler shops, chemical plants, refineries, power plants and areas of environmental protection operate with level indicators and sight glasses. Our delivery programme includes among others: magnetic level indicators tank volume measuring systems reflection indicators flange sight glasses for welding, screwing or soldering replacement glasses liquid level indicators oil level indicators liquid pipes and accessories industrial electronics magnetic level indicators switchboard design and construction magnetic float switches universal controlling and programming fluid level indicators sight glasses www.barthel-armaturen.de 3
Hydraulic, Pneumatic, Industrial Equipment and Hose Line Assembly Since 1937 we are authorized and certificated distributor for Parker Hannifin/Ermeto products. Therewith we are the second eldest partner who accompanies Parker nationally. With the status as a Full-Line trader, a large stock and our own hose line manufacturing plant we are able and flexible to supply you immediately with the complete product range for hydraulics and pneumatics and any further industrial equipment e.g.: connections made of galv. zinc plated steel, stainless steel, brass, CuNi10Fe and bronze tubes, tube clamps, hoses as well as individual hose lines flanges, sealings, installation adhesives Furthermore the Parker programme covers hydraulic and pneumatic actuation components, connection parts, refrigeration technology components, which have stood the test continuously a.o. in mechanical engineering, plant engineering, vehicle- and ship-building and -construction, in chemistry, energy-, measurement and control technology and many other branches have been approved a million times. extract Parker programme EO-2-System valves tubes and tube clamps Pressure, Temperature and Accessories Since more than 20 yeras we are supplying pressure measuring technology for hydraulic and pneumatic pressure applications as well as temperature measuring technology for shipbuilding and for almost all industrial fields of application of mechanical and process engineering as well as energy technology. Large warehouses as well as long lasting partnerships are proof of quality, flexibility and efficiency within that range of products. We stock up for you: standard pressure gauges, unfilled resp. filled with glycerine of all variants absolute- and differential pressure gauges pressure sensors and -switches temperature measuring devices, mechanical and electronical bimetal- and resistance thermometers machine thermometers pressure gauge cocks and -valves accessories e.g. adaptors, measuring device supports pressure gauges pressure gauge cocks and -valves pressure gauge units thermometers 4 www.barthel-armaturen.de
Sampling Systems Starting from the assumption of the approved principles of taking samples Barthel sampling systems realize all requirements of safe and representative sample taking by individual adaptation of details. We are specialists for custom-made solutions which meet the high safety standards as well as the statutory demands (e.g. TA-air) of chemistry and petrochemical industry. For taking samples out of fluids, solids, gases and their composites we derive benefit from the whole range of potentialities of technical solutions. Therefore our delivery programme includes a.o. fixed-volume systems, draw-off into sample cylinders, needle-/septum techniques, cross-cut systems as well as auger samplers. Flow Measurement with Head Meters (Differential Pressure Producers) Although many new developments have come onto the market within the last years flow measurement according to differential pressure procedure has become the most applied measuring method in chemical and petro-chemical plants. A large stock of raw material, also special materials, ensures a short delivery time. orifice plates with carrier ring Design, production and test of head meters are performed according to ISO 9001 and pressure equipment directive (PED) 97/23/EC in accordance with your flow conditions. calculations acc. to ISO 5167 (DIN 1952) orifice plates with single tap or carrier ring head meters for welding or wafer type meter runs orifice flanges, orifice plates venturi nozzles, ISA-1932-nozzles venturi tubes, inlet nozzles segmental orifices, quarter circle nozzles integral pressure tubes balance vessels shut-off valves valve blocks evaluation devices for differential pressure producers orifice flanges orifice plates with carrier ring sectional figure venturi tubes meter runs orifice plates with setback www.barthel-armaturen.de 5
Marine Shipbuilding As a manufacturer and longtime supplier of the German Navy we almost provide all well-known shipyards and supplier enterprises with valves, equipment and special solutions according to VG standards. Since years even electrical gear motor drive technology has successfully been applied in marine shipbuilding. The installation of e-actuators onto the valves ex works is possible without any problems by respecting standards and modular systems. Our delivery programme ex stock goes into action as original equipment on frigates, mine hunters, corvettes, trial ships, ultra-modern mega yachts and satisfies the need of spare parts of maintenance and alterations. Special Construction Many years of experience with practical orientation in the range of special valves and plant engineering enables us to meet the individual requirements of our customers. From simply modified standards up to developement and adjustment of actuators and control drives as well as vessel- and plant construction we design and fabricate in accordance with your individual requirements. special filters units line samplers sample coolers special valves special fittings 6 www.barthel-armaturen.de
An Outright Complete Service Spectrum Better a small master than a great servant Truly in accordance with his motto Fritz Barthel established the company Fritz Barthel Armaturen on April 1st., 1932. Because of his long experience in shipbuilding and own manufacturing. Fritz Barthel was soon able to realise a high individual conformity with the special requirements of the Hamburgian and North German shipyards and industries. Our goal is to carry on working on a balanced and high-quality delivery programme. The combination of quality, know-how and family tradition in the 3rd generation provides a flexible and responsible partner - ship. With up-to-date production on conventional and CNC lathe and milling machines we manufacture according to your or our drawings (2D/3D) out of all materials. Our large stock enables us to shorten delivery times considerably. As service provider and -partner we also offer short-dated repairs, inspections and adjustments of steam traps, safety valves as well as control valves. Certification and approvals Traditionally quality assurance rates high in our company. We are in possessions of approvals a.o. as follows: since 1996 quality system DIN EN ISO 9001:2008 (GLC) since 2001 PED 97/23/EG since 1995 approval acc. to TRD 201 EN 729-2 as manufacturer of surveillance plants KTA 1401 and QSP 4a www.barthel-armaturen.de 7
Fritz Barthel Armaturen GmbH & Co. KG Schnackenburgallee 16 22525 Hamburg Germany phone +49 (0)40 39 82 02-0 fax +49 (0)40 39 82 02-77 post@barthel-armaturen.de www.barthel-armaturen.de