s & Fittings Section Two. hain lamp omponents & Hardware. NW s & Fittings.3 ISO s & Fittings.4 S s & Fittings.5 F s & Fittings.6 Wire Seal s.7 dapter Fittings.8 Flexible Hoses & ouplings.9 Weld Fittings Nor-al Products, Inc. 967 South Oregon Street Yreka, 96097 US Tel: 800-84-466 or 530-84-4457 Main Fax: 530-84-930 Sales Fax: 530-84-989 www.n-c.com
s & Fittings NW General Information SETION. SPEIFITIONS Tube sizes: 3 /8 to inches (9.53 to 50.8mm) Materials : 304 or 36L stainless steel O-rings: Viton, una & silicone Fittings Tube finishes: eadblast standard (Tumbled & electropolish available) Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to 50 Nor-al NW flanges are designed to ISO 86 specifications for standard US tube sizes from 3 /8 to inches (9.53 to 50.8mm). They are compatible with other manufacturers ISO-KF style flanges. NW flanges utilize an aluminum clamp with a single wing nut fastener or a lockover-center clamp allowing frequent disassembly without tools. The vacuum seal is effected by the application of uniform pressure from the clamp on the 5º surface of the 304 stainless steel flanges. The mating flange surfaces compress a Viton O-ring held in place by a centering ring. The resultant seal can be used in vacuum applications of up to 0-8 mbar and baked to 00º, however sustained baking above 50º may result in deterioration of O-rings. dditionally, NW flanges allow components to be rotated before assembly for ease of component alignment. NW flanges are available on virtually all Nor-al components and fittings. Nor-al manufactures a full line of NW adapters so you can add to or build an entire system with NW components. (See adapters - Section.7) NW flanges can also be used with chain clamps and aluminum seals to obtain a UHV seal bakeable to 50º. (chain clamps and seals are described in Tube entering Ring detail in Section..) New Products Trapped entering Rings Wingnut lamp O-ring Nor-al trapped centering rings for NW flanges feature easy assembly with exact centering and are appropriate for vacuum or pressure by externally supporting the sealing ring. Trapped O-rings are intended for use where pressures range from rough vacuum to above atmosphere. pplications include vacuum pump exhaust lines and abatement tools. O-ring with entering Ring ll dimensions are in inches (mm) & weights SureSeal lamp with Lanyard Lock Ultra-High Vacuum omponents Since 96 www.n-c.com
SETION. SETION. s & Fittings NW ored lank s & lank Off aps.50 (3.8).50 (3.8) iagram iagram NW ored lank s (NW) IGRM TUE NW-0-038 3 / 8 (9.53) 0.38 (9.65) 0.36 (8.8).8 (9.97) NW-0-050 (.70) 0.5 (.95) 0.45 (.46).8 (9.97) NW-6-038 3 / 8 (9.53) 0.38 (9.65) 0.36 (8.8).8 (9.97) NW-6-050 (.70) 0.5 (.95) 0.45 (.46).8 (9.97) NW-6-075 3 (9.05) 0.76 (9.30) 0.68 (7.7).8 (9.97) NW-5-038 3 / 8 (9.53) 0.38 (9.65) 0.36 (8.8).575 (40.0) NW-5-050 (.70) 0.5 (.95) 0.45 (.46).575 (40.0) NW-5-075 3 (9.05) 0.76 (9.30) 0.75 (8.6).575 (40.0) NW-5-00 (5.40).0 (5.65) 0.938 (3.83).575 (40.0) NW-40-038 3 / 8 (9.53) 0.38 (9.65).36 (8.8).6 (54.86) NW-40-050 (.70) 0.5 (.95) 0.45 (.46).6 (54.86) NW-40-075 3 (9.05) 0.76 (9.30) 0.75 (8.6).6 (54.86) NW-40-00 (5.40).0 (5.65) 0.938 (3.83).6 (54.86) NW-40-50 (38.0).5 (38.35).438 (36.53).6 (54.86) NW-50-038 3 / 8 (9.53) 0.38 (9.65).36 (8.8).95 (74.93) NW-50-050 (.70) 0.5 (.95) 0.45 (.46).95 (74.93) NW-50-075 3 (9.05) 0.76 (9.30) 0.75 (8.6).95 (74.93) NW-50-00 (5.40).0 (5.65) 0.938 (3.83).95 (74.93) NW-50-50 (38.0).5 (38.35).438 (36.53).95 (74.93) NW-50-00 (50.80).0 (5.05).938 (49.3).95 (74.93) NW 36L Stainless Steel ored lank s (NW) IGRM TUE NW-5-00-36L (5.40).0 (5.65) 0.938 (3.83).575 (40.0) NW-40-50-36L (38.0).5 (38.35).438 (36.53).6 (54.86) NW-50-00-36L (50.80).0 (5.05).938 (49.3).95 (74.93) SPEIFITIONS Tube sizes: 3 /8 to inches (9.53 to 50.8mm) Materials : 304 or 36L stainless steel O-rings: Viton, una & silicone Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to 50 lank Off aps NW-0 0.00 (5.08).8 (9.97) NW-6 0.00 (5.08).8 (9.97) NW-5 0.00 (5.08).575 (40.0) NW-40 0.00 (5.08).6 (54.86) NW-50 0.00 (5.08).95 (74.93) 36L lank Off aps NW-6-36L 0.00 (5.08).8 (9.97) NW-5-36L 0.00 (5.08).575 (40.0) NW-40-36L 0.00 (5.08).6 (54.86) NW-50-36L 0.00 (5.08).95 (74.93) ll dimensions are in inches (mm) & weights See Section. for metal seals 3 Ultra-High Vacuum omponents Since 96 www.n-c.com
s & Fittings NW Socket Weld & Weld Neck s SETION. SETION. NW Socket Weld s TUE E NW-0-SW (.70).8 (9.97) 0.48 (.9) 0.5 (.95) 0.6 (5.49) - NW-6-SW 3 (9.05).8 (9.97) 0.68 (7.7) 0.76 (9.30) 0.798 (0.7) - NW-5-SW (5.40).575 (40.0).03 (6.9).0 (5.65).4 (8.96) 0.938 (3.83) NW-40-SW (38.0).6 (54.86).6 (4.5).5 (38.35).64 (4.66).438 (36.53) NW-50-SW (50.80).95 (74.93).06 (5.3).0 (5.05).4 (54.36).938 (49.3).500 (.7).50 (3.8) E.0 (3.05).575 (40.0).00 (.54) 5 NW Long Weld Neck s NW-0FL.8 (9.97) 0.48 (.9) 0.38 (9.65) (.70) NW-6FL.8 (9.97) 0.68 (7.7) 0.65 (5.88) 3 (9.05) NW-5FL.575 (40.0).03 (6.9) 0.87 (.0) (5.40) NW-40FL.6 (54.86).6 (4.5).37 (34.80) (38.0) NW-50FL.95 (74.93).06 (5.3).87 (47.50) (50.80) NW 36L Stainless Steel Long Weld Neck s NW-5FL-36L.575 (40.0).03 (6.9) 0.87 (.0) (5.40) NW-40FL-36L.6 (54.86).6 (4.5).37 (34.80) (38.0) NW-50FL-36L.95 (74.93).06 (5.3).87 (47.50) (50.80) NW Short Weld Neck s TUE E IGRM NW-0F (.70).8 (9.97) 0.48 (.9) 0.38 (9.65) (.70) 0.5 (.70) NW-6F 3 (9.05).8 (9.97) 0.68 (7.7) 0.65 (5.88) 3 (9.05) 0.56 (4.) NW-6F 3 (9.05).8 (9.97) 0.68 (7.7) 0.65 (5.88) 3 (9.05) 0.5 (.70) NW-5F (5.40).575 (40.0).03 (6.9).087 (.0) (5.40) 0.5 (.70) NW-40F (38.0).6 (54.86).6 (4.5).37 (34.80) (38.0) 0.75 (9.05) NW-50F (50.80).95 (74.93).06 (5.3).87 (47.50) (50.80) 0.75 (9.05) E.0 (3.05) iagram.00 (.54) 5 o E.0 (3.05) iagram.00 (.54) 5 o SPEIFITIONS Tube sizes: 3 /8 to inches (9.53 to 50.8mm) Materials : 304 or 36L stainless steel O-rings: Viton, una & silicone Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to 50.67 (7.07) ll dimensions are in inches (mm) & weights See Section. for metal seals Ultra-High Vacuum omponents Since 96 www.n-c.com 4
SETION. s & Fittings NW ssembly Hardware NW Wing Nut lamps NW-0-P.69 (4.93).39 (60.76) 0.65 (5.88) NW-6-P.69 (4.93).39 (60.76) 0.65 (5.88) NW-5-P.4 (54.36).796 (7.0) 0.65 (5.88) NW-40-P.75 (69.85) 3.437 (87.30) 0.65 (5.88) NW-50-P 3.50 (88.90) 4.45 (07.8) 0.70 (8.03) NW SureSeal lamps NW-0-SS.750 (44.45).39 (60.76) 0.74 (8.8) NW-6-SS.750 (44.45).39 (60.76) 0.74 (8.8) NW-40-SS.947 (74.85) 3.437 (87.30) 0.74 (8.8) NW-50-SS 3.784 (96.) 4.45 (07.8) 0.836 (.3) NW SureSeal lamps with Lanyard Nor-al Wing Nut and SureSeal NW lamps feature special centering ribs and evenly distributed clamping force to assure uniform O-ring compression and reduce the probability of failure under loads. dditional hinge knuckles and tighter manufacturing tolerances result in precise alignment and reduced side play. lamp opening is limited to facilitate one-handed installation in hard-to-reach spaces. In addition to the above features, the SureSeal clamp provides instant closure with a fixed geometry to attain optimal O-ring compression. ll Nor-al NW clamps are designed and manufactured to meet Pneurop specifications for ISO-KF 0 through 50 flanges, so you can be confident of universal compatibility. We also provide chain clamps and metal seals for ISO-KF components to transform them from high vacuum to ultra-high vacuum connections. NW-0-SS-L.750 (44.45).39 (60.76) 0.74 (8.8) NW-6-SS-L.750 (44.45).39 (60.76) 0.74 (8.8) NW-40-SS-L.947 (74.85) 3.437 (87.30) 0.74 (8.8) NW-50-SS-L 3.784 (96.) 4.45 (07.8) 0.836 (.3) LMP NW lamp learance etails FLNGE MIN. I. TO INSTLL MX. I. LOSE MIN. I. LOSE NW-0-P NW-0.86 (7.64).65 (67.3).75 (44.45) NW-6-P NW-6.86 (7.64).65 (67.3).75 (44.45) NW-5-P NW-5 3.3 (84.33) 3.00 (76.0).4 (56.90) NW-40-P NW-40 4.00 (0.60) 3.7 (94.49).90 (73.66) NW-50-P NW-50 5.45 (38.43) 4.6 (7.35) 3.69 (93.73) 0.57 ll dimensions are in inches (mm) & weights NW ulkhead lamps OF SREWS THROUGH HOLE NW-6-P.00 (50.80).50 (38.0) 0.36 (9.7) 6 0.90 (.86) NW-5-P.37 (60.0).89 (48.0).0387 (9.83) 6.6 (3.00) NW-40-P.94 (74.68).44 (6.98) 0.366 (9.30) 6.84(46.74) NW-50-P 3.75 (95.5) 3.5 (8.55) 0.404 (0.6) 8.35 (59.69) dd -MS for metric bolts ulkhead clamps provide a simple means of fastening an NW flange to a baseplate. Each aluminum clamp is sold with stainless steel socket head cap screws and washers for attachment. Leave 0.075 inch (mm) minimum between the bottom of the tapped hole and the inside of the chamber wall. 0-3 x 5/ 8 " Screws NW ulkhead or aseplate ulkhead lamps NW entering Ring 5 Ultra-High Vacuum omponents Since 96 www.n-c.com
s & Fittings9 NW entering Rings SETION. Nor-al offers aluminum and stainless steel centering rings for NW and ISO flanges. una, silicone and Viton O-rings are available for NW, while una and Viton are stocked for ISO centering rings. luminum ISO centering rings are provided with an aluminum spacer ring. Stainless steel ISO centering rings are also provided with aluminum spacer rings as an option. NW luminum entering Rings with O-ring MTERIL NW-0-R-V Viton 0.478 (.4) 0.456 (.58) NW-0-R- una 0.478 (.4) 0.456 (.58) NW-6-R-V Viton 0.669 (6.99) 0.65 (5.88) NW-6-R- una 0.669 (6.99) 0.65 (5.88) NW-5-R-V Viton.04 (6.0) 0.984 (4.99) NW-5-R- una.04 (6.0) 0.984 (4.99) NW-40-R-V Viton.64 (4.00).57 (39.88) NW-40-R- una.64 (4.00).57 (39.88) NW-50-R-V Viton.047 (5.99).967 (49.96) NW-50-R- una.047 (5.99).967 (49.96).30 (7.87).0 (5.33).54 (3.9) NW Stainless Steel entering Rings with O-ring MTERIL NW-0-R-SV Viton 0.478 (.4) 0.456 (.58) NW-0-R-SS Silicone 0.478 (.4) 0.456 (.58) NW-0-R-S una 0.478 (.4) 0.456 (.58) NW-6-R-SV Viton 0.669 (6.99) 0.65 (5.88) NW-6-R-SS Silicone 0.669 (6.99) 0.65 (5.88) NW-6-R-S una 0.669 (6.99) 0.65 (5.88) NW-5-R-SV Viton.04 (6.0) 0.984 (4.99) NW-5-R-SS Silicone.04 (6.0) 0.984 (4.99) NW-5-R-S una.04 (6.0) 0.984 (4.99) NW-40-R-SV Viton.64 (4.00).570 (39.88) NW-40-R-SS Silicone.64 (4.00).570 (39.88) NW-40-R-S una.64 (4.00).570 (39.88) NW-50-R-SV Viton.047 (5.99).967 (49.96) NW-50-R-SS Silicone.047 (5.99).967 (49.96) NW-50-R-S una.047 (5.99).967 (49.96).30 (7.87).0 (5.33).54 (3.9) NW 36L Stainless Steel entering Rings with O-ring MTERIL NW-5-R-SV-36L Viton.04 (6.0) 0.984 (4.99) NW-40-R-SV-36L Viton.64 (4.00).570 (39.88) NW-50-R-SV-36L Viton.047 (5.99).967 (49.96).30 (7.87).0 (5.33).54 (3.9) ll dimensions are in inches (mm) & weights See page 6 for replacement O-rings Ultra-High Vacuum omponents Since 96 www.n-c.com 6
SETION. s & Fittings NW entering Rings & Replacement O-rings.30 (7.87).0 (5.33).54 (3.9) NW Screened Stainless Steel entering Rings with Viton O-ring MTERIL MESH NW-5-R-SV-74 Viton.04 (6.0) 0.984 (4.99) 74 NW-40-R-SV-74 Viton.64 (4.00).570 (39.88) 74 NW-50-R-SV-74 Viton.047 (5.99).967 (49.96) 74.30 (7.87).54 (3.9).0 (5.33) NW Reducer Stainless Steel entering Rings with Viton O-ring MTERIL NW-0/6-R Viton 0.48 (.9) 0.67 (7.0) NW-0/5-R Viton 0.87 (.0).0 (5.9) NW-3/40-R Viton.34 (34.04).6 (40.89) una and Silicone O-rings available. all for pricing. For dimensions refer to the centering ring/o-ring assembly drawing on the previous page and the overpressure ring diagram this page. NW Stainless Steel entering Rings with Viton O-ring and Over Pressure Ring NW-0-R-SV-PR NW-6-R-SV-PR NW-5-R-SV-PR NW-40-R-SV-PR NW-50-R-SV-PR una and Silicone O-rings available. all for pricing. ESRIPTION ontains model numbers NW-0-PR and NW-0-R-SV ontains model numbers NW-6-PR and NW-6-R-SV ontains model numbers NW-5-PR and NW-5-R-SV ontains model numbers NW-40-PR and NW-40-R-SV ontains model numbers NW-50-PR and NW-50-R-SV NW Stainless Steel Over Pressure Rings MXIMUM PSIG NW-0-PR.5 (3.75).86 (30.) 0.346 (8.79) 00 NW-6-PR.5 (3.75).86 (30.) 0.346 (8.79) 00 NW-5-PR.66 (4.6).583 (40.) 0.346 (8.79) 00 NW-40-PR.5 (57.5).69 (55.09) 0.346 (8.79) 75 NW-50-PR.75 (69.85).60 (66.55) 0.45 (3.68) 50.54 (3.9) NW Stainless Steel aptured entering Rings with Viton O-ring MTERIL MXIMUM PSIG NW-6-R-SV Viton.5 (3.75) 0.65 (5.88) 00 NW-5-R-SV Viton.66 (4.6) 0.984 (4.99) 00 NW-40-R-SV Viton.5 (57.5).570 (39.88) 75 NW-50-R-SV Viton.75 (69.85).967 (49.96) 50 una and Silicone O-rings available. all for pricing..57 (3.99).35 (8.00) NW trapped centering rings are composed of an aluminum outer ring, Viton O-ring, and stainless steel centering ring NW Stainless Steel Trapped entering Rings with O-ring MTERIL NW-0/6-RT-SV Viton.8 (9.97) 0.63 (6.00) 0.9 (3.) NW-5-RT-SV Viton.58 (40.3) 0.95 (4.3).3 (33.0) NW-40-RT-SV Viton.7 (55.).58 (40.3).89 (48.0) NW-50-RT-SV Viton.95 (74.93).97 (50.04).3 (58.93) una and Silicone O-rings available. all for pricing. ll dimensions are in inches (mm) & weights Viton O-Rings NW-0-OR-V NW-6-OR-V NW-5-OR-V NW-40-OR-V NW-50-OR-V FLNGE TYPE NW-0 NW-6 NW-5 NW-40 NW-50 Silicone O-Rings NW-0-OR-S NW-6-OR-S NW-5-OR-S NW-40-OR-S NW-50-OR-S FLNGE TYPE NW-0 NW-6 NW-5 NW-40 NW-50 una O-Rings NW-0-OR- NW-6-OR- NW-5-OR- NW-40-OR- NW-50-OR- FLNGE TYPE NW-0 NW-6 NW-5 NW-40 NW-50 7 Ultra-High Vacuum omponents Since 96 www.n-c.com
s & Fittings NW Fittings SETION. SPEIFITIONS Tube sizes: / to inches (.7 to 50.8mm) Materials : 304 stainless steel (36L available upon request) O-rings: Viton, una & silicone Fittings Tube finishes: eadblast standard (Tumbled & electropolish available) Fasteners: Wing nut, SureSeal, bulkhead & chain clamps Vacuum range Elastomer seal: > x 0-8 mbar -High vacuum Metal seal: > x 0 - mbar - UHV Temperature range Viton: -0º to 00º Silicone: -50º to 30º una: -30º to 0º Metal seal: -70 to 50 See Section. for metal seals Nor-al manufactures a complete line of NW vacuum fittings. The tube portions are fabricated from 304 stainless steel. 36L stainless steel can be supplied on request. Nor-al makes its own elbows, and all tees and crosses are made with the pulled-port technique. This allows smooth, crevice-free butt welds to provide the maximum in cleanliness for UHV applications. akeout range is up to 00. Nor-al fittings are also available with F, ISO and S flanges. Standard finish is bead blasted. Electropolished finish can also be provided as an option. all for pricing. NW Half Nipples TUE N-NW-0 (.70).5 (3.75) N-NW-6 3 (9.05).5 (9.) N-NW-5 (5.40).03 (5.56) N-NW-40 (38.0).40 (60.96) N-NW-50 (50.80) 3.5 (80.0) NW Full Nipples TUE N-NW-0 (.70).50 (63.50) N-NW-6 3 (9.05).30 (58.4) N-NW-5 (5.40) 4.06 (03.) N-NW-40 (38.0) 4.80 (.9) N-NW-50 (50.80) 6.30 (60.0) ll dimensions are in inches (mm) & weights Ultra-High Vacuum omponents Since 96 www.n-c.com 8
SETION. s & Fittings NW Fittings NW Reducer Nipples FLNGE FLNGE TUE NR-NW-6-0 NW-6 NW-0 (.70).40 (35.56) NR-NW-5-0 NW-5 NW-0 (.70).40 (35.56) NR-NW-5-6 NW-5 NW-6 3 (9.05).30 (33.0) NR-NW-40-0 NW-40 NW-0 (.70).40 (35.56) NR-NW-40-6 NW-40 NW-6 3 (9.05).30 (33.0) NR-NW-40-5 NW-40 NW-5 (5.40).8 (55.37) NR-NW-50-0 NW-50 NW-0 (.70).40 (35.56) NR-NW-50-6 NW-50 NW-6 3 (9.05).30 (33.0) NR-NW-50-5 NW-50 NW-5 (5.40).8 (55.37) NR-NW-50-40 NW-50 NW-40 (38.0).55 (64.77) NW onical Reducer Nipples FLNGE FLNGE NR-NW-5-6 NW-5 NW-6 0.6 (5.75).57 (39.88) NR-NW-40-6 NW-40 NW-6 0.6 (5.75).57 (39.88) NR-NW-50-6 NW-50 NW-6 0.6 (5.75).57 (39.88) NR-NW-40-5 NW-40 NW-5 0.87 (.0).57 (39.88) NR-NW-50-5 NW-50 NW-5 0.87 (.0).57 (39.88) NR-NW-50-40 NW-50 NW-40.38 (35.05).57 (39.88) NW 36L onical Reducer Nipples FLNGE FLNGE NR-NW-40-5-36L NW-40 NW-5 0.87 (.0).57 (39.88) NR-NW-50-40-36L NW-50 NW-40 0.87 (.0).57 (39.88) Typ. NW Tees TUE 3T-NW-0 (.70).5 (3.75) 3T-NW-6 3 (9.05).5 (9.) 3T-NW-5 (5.40).03 (5.56) 3T-NW-40 (38.0).40 (60.96) 3T-NW-40H (38.0).56 (65.0) 3T-NW-50 (50.80) 3.5 (80.0) 3T-NW-50H (50.80).76 (70.0) NW Reducer Tees TUE & RM TUE 3 LEG 3TR-NW-5-6 (5.40) 3 (9.05).03 (5.56).7 (3.6) 3TR-NW-40-6 (38.0) 3 (9.05).40 (60.96).53 (38.86) 3TR-NW-40-5 (38.0) (5.40).40 (60.96).8 (57.9) 3TR-NW-50-6 (50.80) 3 (9.05) 3.5 (80.0).78 (45.) 3TR-NW-50-40 (50.80) (38.0) 3.5 (80.0).65 (67.3) 3 Typ. 9 Ultra-High Vacuum omponents Since 96 www.n-c.com
s & Fittings NW Fittings SETION. NW 45 Radius Elbows TUE K-NW-5 (5.40) 0.77 (9.56) K-NW-40 (38.0).08 (7.43) K-NW-50 (50.80).39 (35.3) NW 45 Radius Elbows with Tangents TUE KL-NW-6 3 (9.05) 0.9 (3.) KL-NW-5 (5.40). (8.45) KL-NW-40 (38.0).68 (4.67) KL-NW-50 (50.80).99 (50.55) NW 90 Radius Elbows TUE E-NW-0 (.70).5 (3.75) 0.75 (9.05) E-NW-6 3 (9.05).5 (9.).00 (5.40) E-NW-5 (5.40).65 (4.9).50 (38.0) E-NW-40 (38.0).40 (60.96).5 (57.5) E-NW-40H (38.0).56 (65.0).5 (57.5) E-NW-40HL (38.0) 5. (30.05).5 (57.5) E-NW-50 (50.80) 3.5 (80.0) 3.00 (76.0) E-NW-50HL (50.80) 5.5 (39.95) 3.00 (76.0) Typ. Typ. Typ. NW 90 Mitered Elbows TUE E-NW-6M 3 (9.05).5 (9.) E-NW-5M (5.40).03 (5.56) E-NW-40M (38.0).40 (60.96) E-NW-40MH (38.0).56 (65.0) E-NW-50M (50.80) 3.5 (80.0) E-NW-50MH (50.80).76 (70.0) Typ. ll dimensions are in inches (mm) & weights Ultra-High Vacuum omponents Since 96 www.n-c.com 0
SETION. s & Fittings NW Fittings Typ. NW 4-Way rosses TUE 4-NW-0 (.70).5 (3.75) 4-NW-6 3 (9.05).5 (9.) 4-NW-5 (5.40).03 (5.56) 4-NW-40 (38.0).40 (60.96) 4-NW-40H (38.0).56 (65.0) 4-NW-50 (50.80) 3.5 (80.0) 4-NW-50H (50.80).76 (70.0) 3 NW Reducer rosses TUE & TUE 3 & 4 4R-NW-5-6 (5.40) 3 (9.05).03 (5.56).7 (3.6) 4R-NW-40-6 (38.0) 3 (9.05).40 (60.96).53 (38.86) 4R-NW-40-5 (38.0) (5.40).40 (60.96).8 (57.9) 4R-NW-50-6 (50.80) 3 (9.05) 3.5 (80.0).78 (45.) 4R-NW-50-40 (50.80) (38.0) 3.5 (80.0).65 (67.3) Typ. 4 Typ. 5th Leg Opposite Typ. NW 5-Way rosses TUE 5-NW-6 3 (9.05).50 (38.0) 5-NW-5 (5.40).03 (5.56) 5-NW-40 (38.0).40 (60.96) 5-NW-50 (50.80) 3.5 (80.0) Typ. NW 6-Way rosses TUE 6-NW-6 3 (9.05).50 (38.0) 6-NW-5 (5.40).03 (5.56) 6-NW-40 (38.0).40 (60.96) 6-NW-50 (50.80) 3.5 (80.0) 6th Leg Opposite Typ. ll dimensions are in inches (mm) & weights Ultra-High Vacuum omponents Since 96 www.n-c.com